T43: Looking for IDE driver?

The Lenovo Drivers Site for the T43 only seems to support everything but XP?
When I try to install an IDE driver for the other platforms (ME,2000,NT,98,95) I get an error.
The Link on the Drivers page has a comment net to it stating it's for XP, but the software explodes into about 5 directories and none of them conatin an XP driver.
Not sure how my IDE Channel lost it's driver, but I can't seem to find a replacement for XP-Pro???
Any help or alternate source for XP drivers for a T43 ??
Thanks,
Guy

Guy, welcome to the forum,
I don't know which driver you are trying to install, but all commen drivers for the T43 can be found on this site or you could try using the System Update utility. That being said, as the T43 has a S-ATA to P-ATA bridge, it may be that you need to install the Chipset driver from the driver site.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Similar Messages

I am looking for a driver...

I am looking for a driver for the ATI Radeon HD 4850. I made a mistake and downloaded a patch for an Nvidia card and have corrupted my driver. I am only able to start in safe mode. my hope is if I reinstall the driver then I can fix the issue. any ideas?

So I found this in another forum.
SamWrangles
Dec 27, 2008, 09:29 PM
I have Mac os X 10.5.6 and I installed the Nvidia 256 color fix. Now I'm totally screwed. I have to boot in safe mode.
Who knows anything about how to REVERSE what that patch did to my machine?
i am having the same problem!!!
pleaaassee help!!!
how do i get rid of the driver!?!?!?
SamWrangles
Dec 28, 2008, 09:21 AM
ive fixed the start up!!!
just install the driver again and it uninstalls it!!
still no fallout tho "
The problem arose from my installing a 256 color fix for a Nvidia Card. Trying to run Fallout 1. Noticed that if you run the fix again you have an uninstall option. I am able to run the option but get a failure message in the end.
I got "fix" from:
http://www.mediafire.com/?3d2hbizmbzt
Which corrupted my video driver.

Looking for basic driver for psc all in one 2175 for XP 32 bit. Thank you

looking for basic driver for psc all in one 2175 for XP 32 bit. Thank you Dont need all the photo suite stuff,just basic scan and print.
Thanks

Hi @RUkiddingme
You can download the full feature software and driver, and only install the basic driver. In the installation you should see the option for custom software. Here is the link to download the software; rw2_021_w02_enu.exe
Please let me know if this resolves the issue.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Looking for ideas for transferring large amounts of data between systems

Hello,
I am looking for ideas based on best practices for transferring Large Amounts of Data in and out of a Netweaver based application.
We have a new system we are developing in Netweaver that will utilize both the Java and ABAP stack, and will require integration with other SAP and 3rd Party Systems. It is a standalone product that doesn't share any form of data store with other systems.
We need to be able to support 10s of millions of records of tabular data coming in and out of our system.
Since we need to integrate with so many different systems, we are planning to use RFC for our primary interface in and out of the system. As it turns out RFC is not good at dealing with this large amount of data being pushed through a single call.
We have considered a number of possible ideas, however we are not very happy with any of them. I would like to see what the community has done in the past to solve problems like this as well as how SAP currently solves this problem in other applications like XI, BI, ERP, etc.

Primoz wrote:Do you use KDE (Dolphin) 4.6 RC or 4.5?
Also I've noticed that if i move / copy things with Dolphin they're substantially slower than if I use cp/mv. But cp/mv works fine for me...
Also run Dolphin from terminal to try and see what's the problem.
Hope that help at least a bit.
Could you explain why Dolphin should be slower? I'm not attacking you, I'm just asking.
Cause I thought that Dolphin is just a „little" wrapper around the cp/mv/cd/ls applications/commands.

I am looking for a driver for a BJC-420J PRINTER

I am looking for a driver for a BJC-420J PRINTER

Hi dad,
Drivers for Windows 7 are not available for this model. While considering the desire to provide the best possible support for Canon's current products, Canon must make decisions on which products to support when new operating systems are introduced. These decisions are generally based on the age of the product and the number of product estimated to be still in use.
Since your device is not supported under the current operating system, you are eligible for Canon's Loyalty Program. This option allows you a one-time opportunity to purchase a new or refurbished product that uses Canon’s next generation technology and carries a limited manufacturer’s warranty. To help you get up and running quickly, we also offer free ground shipping (if the order is completed by 4:00 PM EST). If you would like to take part in this option, please call our Sales Department at (800)OK-CANON (800-652-2666) seven days a week, 8am to Midnight.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

My printer is a Samsung ML-2010R. Still looking for a driver solution to run Mac OS X Lion through a new Macbook Pro. Previously, I was running Mac Os X version 10.5.8 through this printer on a 4 yr old Macbook. Any further help is most appreciated:-)

My printer is a Samsung ML-2010R. Still looking for a driver solution to run Mac OS X Lion through a new Macbook Pro. Previously, I was running Mac Os X version 10.5.8 through this printer on a 4 yr old Macbook. Any further help is most appreciated:-) Humbly, bowiej

Apple seems to be naming their operating sytems usability based on the respective turd size of the feline in question. Lions are big, very, very, very big.
I had a system that served me well for 2 years until I mistaking bought a new machine which runs mega-turd (Lion). Foolish me, now nothing works properly, its a daily struggle to get anything working smoothly using my NEW mac mini. All my other machines work fine, even the windows machines and my Android tablet see all the network components and can talk to each other.
My Internet service is over 3g which I share to the house using internet sharing via my brand new €800 mac mini running POS Lion, everytime the service is interrupted, Kaboom, the mini resets the DHCP server, but doesn't seem to refresh any of the components so connections drop everywhere.
Its amateur hour at Apple folks.
There are several posts alone relating to internet sharing, I have submitted a bug report relating to the non user controllable DHCP server (which may be at fault), but the response / solution from Apple was lacklustre and ultimately didn't work.
See this, there are some work around's in there;
https://discussions.apple.com/thread/3771614?start=0&tstart=0

Looking for Mouse Driver

I have a HP Pavilion p6331p Desktop PC, and I'm looking for a driver for the mouse that came with the PC.
Here are the details on the bottom side of the mouse:
M/N: N910U
RATING: 5V ...100mA
Class-1LED Product
HP P/N: 505062-001 Rev.A
HP S/N: {Removed for privacy}
KYE P/N: 31010563201
I have Win7 (64-bit)
The reason I'm requesting drivers for the mouse is: After a few months using the PC, one day I decided to install Ubuntu, so that I could dual-boot between Win7 and Ubuntu. I created a blank partition, and when I installed Ubuntu, I used Ubuntu to format the blank area, and instead it formated the entire drive, wiping off setup files that HP installed on the secondary partion.
Therefore, I had to buy Win7 and re-install the OS to the computer. Ever since, the wheel on the mouse has been irratic. This is why I am looking for the driver for the HP mouse. I have looked in the file section on HP's website, and cannot locate a driver. I have downloaded the other software that came with the computer.
Can someone please direct me to the driver software?

you probably didnt make a partition ubuntu could recognize
windows makes a dynamic partition which only windows can recognize,so if you were going to install sometihng else,it wouldnt recognize the partition
use gparted to make basic partitions,
your question,
is your mouse the touchpad or a usb mouse ?
If my reply was helpful please click the "Kudos" star.
If your problem is solved please click the "Accept as Solution" button

Looking for LabView driver for Suruga-Seiki motorized stage controller model D70

I'm Looking for LabView driver for Suruga-Seiki (Japan)motorized stage controller model D70, GPIB or RS232 (optional model D92).

Hi,
Unfortunately, I was unable to locate a driver for your instrument. I would like you to submit a request for this driver at: http://zone.ni.com/idnet97.nsf/instrumentdriverrequest/ and with the instrument manufacturer. We develop drivers based on demand and popularity so the more requests we have for it, the greater the possibility that we will develop one.
If you would like to try developing your own instrument driver (or modify the existing one), we have documentation, model instrument drivers, and driver templates to help at :
http://www.ni.com/devzone/idnet/development.htm
We also have a syndicate of third party vendors that specialize in National Instruments' products and services. Some of the vendors specialize in driver development. I would s
uggest contacting one of the Alliance members at:
http://www.ni.com/alliance
An instrument driver is a collection of functions that implement the commands necessary to perform the instrument�s operations. In short, someone read the instrument user manual and implemented some of the functionality in a program for the end user. Instrument drivers are not necessary to use your instrument. They are merely time savers to help you develop your project so you do not need to study the manual before writing a program.
There are example VI's in LV on Instrument Connectivity. If you go to the Help menu >> Examples.. >> I/O, you will see a couple and Examples.. >> Fundamentals for File and String manipulation. I would suggest tweaking them to suit your application. Also the specific command that your instrument responds to can be found from it's manual.
Some useful resources for your application are
ni.com > NI Developer Zone > Development Library > Instrument Connectivity
http:/
/search.ni.com/?col=alldocs&layout=TechResources&ql=a , to search examples and knowledge bases
Hope this helps!
Best Regards,
Aaron K.
Application Engineer
National Instruments

Looking for labview driver to control Tennesy Chamber

Looking for Labview driver to control Tennesy Jr Environmental Chamber
(Watlow series 942 controller) LV6.0
Email [email protected] if you can help out.
Thanks,
David.

The first place to look for stuff like this is the vendor's web page--in this case www.watlow.com. How did I know this? I guessed. You can typically guess 90% of company websites...
In a couple minutes I was able to find your controller and a document on how to communicate with it. If you email me I can send it to you (it's too big to post...).
Next, reading the document (which by the way contains a good basic primer on serial communications)I saw that one of the protocols you can use for communicating with the 942 is Modbus RTU. I can also send you a set of modbus drivers.
Hope this helps in thermal testing your chips...
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Looking for usb3 drive enclosure

looking for usb3 drive enclosure that actually works with late 2012 iMac. I've tried several that say they are compatible but don't work. The drive 2Tb WD Green works like a champ in a usb2 enclosure but I would like the extra speed. Any Suggestions? Thanks in advance for any replies.

For 2.5'' SATA drive:
OWC Express 2.5" Portable USB 3.0 Enclosure for - Other World ...

Looking for Hard Drive Case for G4 HD

I am looking to access a hard drive from my old G4 by putting it in an external case. I have been told this is doable but have never done so.
Any suggestions on where to look for an external case and what I need to know to choose the correct one form my HD?
Thank you,
Marcantonio

Hi, you need to know if the drive is IDE/ATA/PATA, or SATA, and Firewire is far better than USB...
The old ATA cases are getting hard to find, here's a SATA case...
http://eshop.macsales.com/item/Newer%20Technology/FWU2ESMSV3/
ATA...
http://eshop.macsales.com/item/Newer%20Technology/FWU2MSVS2/
Here's a universal way if it doesn't need to be bootable or require speed...
http://eshop.macsales.com/item/Newer%20Technology/U2NVSPATAKIT/
Which actually works for any drive.

New Recording Looks for CD Drive

Hello,
I just installed Adobe Captivate 2.0 onto my laptop. When I
try to record a new project, I get an error message stating that
"there is no disc in drive E:". This is my second license for this
product, and I had no trouble installing the first onto a similar
computer. What would cause the software to look for the application
CD when it is recording, and is there a way to fix this? On my
first license, I was able to install the software, and use it
without having the CD in the drive.
Thanks,
Chris

Hi Chris and welcome to our community
To be honest, yours is the first report I've ever heard of
this happening. I've installed Captivate on lots of different
computers and have never encountered this issue. I also don't
believe I've ever seen it reported here in the forums either.
Because of that, I'm going to crawl way out here on this
shaky little limb and say that your case is probably a one off and
unique.
Is the laptop configured in any way that is somehow
different? For example, is it only used to connect to a company
intranet? If so, maybe something about that setup caused the
behavior.
Wishing I had more to offer here... Rick

Looking for LabVIEW driver for Agilent (HP) 4349B High Resistance Meter

I've been looking for a LabVIEW driver for Agilent (HP) 4349B High Resistance Meter.
Does anyone have one?
Thanks,
Avner

Hello,
It looks like you'll get a reply by Friday; if not repost and I'll follow up for you
Thank you,
JLS
Best,
JLS
Sixclear

Looking for ideas: mass-delete qualified links

Hello SDNers!
I'm looking for an innovative idea on how to mass-delete qualified links. I want to delete all the qualified links to a specific non-qualifier from many records at once. Idealy the scenario would be to search on a specific qualifier, and be able to select all records and delete that qualified value from them. Data Manager can't do this, obviously.
The closest I managed to get was to delete all the values in the qualified link using an import, but that's not enough, I need to delete the links completely.
Before I turn to the APIs, anyone has an idea?
Thanks
Alon

Alon,
You should be able to accomplish this with an export and import.
1. Select the qualified record you want to delete using the search parameters
2. Export out the records with this qualified field - it should only export out the qualified record that you have selected in your search parameter
3. Import this file with the Import Manager
4. Map the qualified table name in the source to the destination
5. Right click on the destination field name and select "Select Qualified Update > Update"
6. A new dialog box will appear
7. For new links select "Skip"
8. For existing links scroll down and select "Delete"
9. When the file imports it should delete all instances of that qualified record
That was a quick explanation. Let me know if you need more detail.
Regards,
Tim

Want to get published? I'm looking for ideas for The Online Learning Idea Book, Vol 2

I edited The Online Learning Idea Book a few years ago and it has been an amazing success! I regularly get emails from readers telling me how much the ideas have helped them. I’m hoping you will submit ideas and help me find additional contributors for the new volume! You can see some of the ideas from the first volume here.
Because the book has been so well received, Wiley has recently asked me to produce a new volume with new ideas. Why submit ideas? Here are three good reasons:
Helping others in our field improve the quality of online instruction
Gaining well‐deserved recognition for your solutions and insights and willingness to share those solutions and insights to help others (each selected idea will receive full attribution)
You’ll receive a free copy of the book if your idea is selected.
Want to know more? Go here to download the FAQs.
I'd love to receive some ideas that show unique ways to use Connect but feel free to submit other ideas as well (the FAQs explain what I am looking for in detail).
Patti
Patti Shank PhD
Learning Peaks LLC
Instruction and information designers
www.learningpeaks.com

Probably either ifixit or OWC...
Clinton

T43: Looking for IDE driver?

Similar Messages

Maybe you are looking for