T43 screen upgrade xga - sxga+, now won't display

Hi, So I have a T43 that had an XGA screen, I bought a SXGA from another T43 and connected it. The screen lights up but nothing appears but lines etc, if I re-attache the old XGA, the screens displays normally. What do I need to do? My model num is 1871-4au

T43 with Intel graphics does not support SXGA+ resolution on a 14" LCD. There's not much to do here apart from going back to the original screen.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Similar Messages

IPhoto upgraded Library but now won't recognize photos (they're still there but in "Old" folders)

After I started up iPhoto this week, it gave me the "your library needs to be upgraded" message. I let it do that, then it said it needed to update thumbnails and I let it do that. Then it opened my library but there are no photos - I get the standard startup message as if this was my first time opening iPhoto.
My library file still shows a size of almost 300GB, and I can go through the package contents to find my photos, but they won't show up in the application. After the upgrade, they're now listed in folders named "Old Masters", "Old Thumbnails", etc., and there are replacement folders in their place (named the same but without the "Old" in the title). These new folders are empty.
It seems like I should just be able to delete "old" from the original folders' names and let them take the place of the new versions, but I don't want to do anything that will cause even more problems! Any thoughts?
FYI: I'm on a new late 2014 Mac Mini (3 GHz Intel Core i7 with 16 GB memory) running Yosemite 10.10.2. My iPhoto library is stored on an external hard drive which is formatted Mac OS Extended (Journaled) - it's the same drive I've used for a long time.
Thanks for your help!

This has been affecting some folks for the past while. Having the Library on an external seems to be part of the issue.
Have a read of this thread
Yosemite, iPhoto 9.6 upgrade, large photo library is not recognised.
there's a post by Zaxe on the second page that has a fix. Worth a try.

Upgraded RAM but now won't recognize

I just bought a 1GB kit from RAMJET (2x 512mb) and installed the new DIMM's inside my mac. Now when I plugged everything back in and rebooted, the computer is not recognizing the new memory. When I go to "About This Mac" the system profile says there is nothing in the two slots where I put the new RAM. Before upgrading I had 1GB of factory installed RAM (2x512mb).
My system says I have 8 slots (J11 through J44) and that I have "DDR SDRAM with a speed of PC3200U-30330." I purchased 1gig DDR400 128bit. These are the same right?
I read the instruction manual and did everything by the book before opening the case. Is there something extra I should be doing to make this work?

I adding 3 gig of RAM on my SP 1.8. I had all sorts of issues after the first 6 months. Apple blamed the RAM upgrade. I had the vendor replace it and now 2 of new simms are fine, but 2 simms will not be recognized no matter where I put them. All 4 of th enew simms are the exact same thing. Any suggestions or tests I can do before I call the vendor again?

[SOLVED] Upgraded System, Openbox now won't load after log in

I upgraded quite a few packages two days ago, none of which were openbox. When I rebooted, openbox didn't correctly load. I don't know how to describe the problem, but I can't seem to open anything from my menus, or run anything in openbox. However, my autostart file seems to load everything and wicd connects so I can use the ttys and browse.
I don't know where to start troubleshooting this. I've looked back at my /var/cache/pacman/pkg/, sorted by time to see the last packages that got updated. I downgraded certain packages one by one to see if anything specifically broke my system, but I had no luck. I downgraded linux, linux headers, xorg, xorg-common, and udev.
Thank you in advance.
Last edited by lexan (2012-02-05 19:52:46)

b4data wrote:
bt wrote:openbox.sh is now just openbox.
You mean autostart.sh is now just autostart
Yes, it is just autostart now ;-)
I double checked, and all this seems to be fine. I haven't even touched openbox main configs since it updated back in August.
Is there an error log for when I log in?
I log in to openbox via slim, and then autostart should* start wicd, cairo-compmgr, nitrogen, conky, and tint2.
My wicd client seems to load because I can get on the internet (via elinks), part of my conky loads but not my lua rings script; nitrogen, cairo, and tint2 don't seem to load. When I right click, I still have access to my OB menu, but cannot launch anything.
Last edited by lexan (2012-02-02 22:48:40)

Lightroom V1.41 upgrade.. Now won't run

Installed Lightroom V1 on my recently reformatted Computer.
Installed Lightroom V1.41 and now when I try and run it, I get
A visual C++ Runtime Library error
"This application has requested the runtime to terminate in an unusual way.
Please contact the Application's support Team for more information...
OK....

(edit) just noticed that you said 1.4 ran prior to reformat. If so, do you have your .lrcat file? (your catalog).
(end edit)
Two links here that may help you:
http://www.luminous-landscape.com/forum/lofiversion/index.php/t20219.html
and
http://www.adobeforums.com/cgi-bin
bob frost, "Help! Runtime error after Lightroom 1.1 install!" #10, 27 Jun 2007 7:54 am
I notice that you say Lightroom 1.0 runs. Since V1.0 the Lightroom database file (the catalog) changed form .lrdb to .lrcat file. The actual change happened in V1.1.
To start LR 1.4 and get it to create a new catalog the recommendation in the references given above is to hold CTRL as you start Lightroom; this forces LR to create a new catalog.
But LR 1.4 will not read V1.0 .lrdb files. You may need to go to an intermediate version (V.1.1, V1.2) to get it to convert your .lrdb to .lrcat. (I do not know if you can use 1.4 to import from catalog if the catalog is .lrdb)

White Screen of Death (text/menu won't display)

Here is my situation: I work at an insurance company and occasionally we will have items come in that are part of a claim. We recently had a 40gb color ipod come in. I was asked to check it out to see if it was still working. I hooked it up to my computer at home and found that everything still works fine other than the screen being completely white and the battery would not hold a charge. I figured that I could at least use it as a portable hard drive if I couldn't get it working. I have changed the battery so that is now fixed, I am still trying to figure out about the white screen issue though. I spent most of Saturday browsing the forums and the internet in general looking for a solution to this problem and I found several people that have the same issue.
So far I have run the ipod updater to put it to the most recent version (2006-06-28), screen is still white. I have also tried using an older version of the updater (2005-10-12), no luck either. I tried the disk mode option (toggle hold on and off, hold select and menu for about 6 seconds, then hold select and play for about 6 seconds), the screen goes white again but I cannot get any text to show up.
It will play music fine, the backlight works just like my other ipod, but when the backlight goes off, I just have a blank screen. I cannot get it to show the apple logo at all either.
Obviously I don't have a warranty as I was not the original purchaser, but I am quite optimistic that I can get it working.
Has anybody completely solved this problem yet? So far the best advice I have seen is the "disk mode" trick, but that doesn't seem to be working. I was just wondering if anybody else has had as much trouble as I have.
Thanks
40GB photo Windows XP Pro

I too have this same problem.... is white and yet I can still here the selector moving around in the main menu.
Any answers out there please let us know how to fix this..
Vipe

Although it worked perfectly up to the auto-update to 3.6.13, Firefox now won't display ANY website, displaying (Untitled) on each tab.

IE still works fine. Firefox was great until 30 minutes ago when it so kindly updated itself, and now it won't show me any websites. I've cleared all history, checked the proxy settings, to no avail. Every tab shows (Untitled).
17-Dec-2010 05:47 p.m. CST

You are welcome.

Changed name, now won't display change

I changed the name of my blog from "Blog Test" to simply "Blog" (still playing with iWeb).
But the change won't show up on any of the pages, meaning that "Blog Test" still appears at the top of the Welcome page rather than "Blog".
Any tips to correct this issue? It's not my cache as I've already cleared it, and the problem appears in iWeb as well.

none. No posts were ever made.

My PSE 5.0 Organizer catalog now won't display any new image from the Editor

Every attempt to Save As from the Editor gets the message, "There was a problem acessing the Organizer catalog. It may be in use by another process, or a disc error occurred."
Then when I attempt to get the same image using the FIle menu and Get Photos ...From Files and Folders, even though the newly saved file is correcly in there as shown by the thumbnail, I get this message:
The ODBC data source reported the following error: "[Microsoft][ODBC Microsoft Acess Driver] Cannot open database 'I'. It may not be a database that your application recognizes, or the file may be corrupt."
I have repeatedly shut down the programs and the whole computer, and although this problem occasionally occurred in the past, now that's all I get.
How can I get my Catalog to show these images?

Thanks for your suggestion - Recover did it! (That may have seemed obvious to you, but not being much of a computer expert, I didn't know enough to even ask the right question.) I'm so glad to have my Organizer back!

My screen has gone blank and won't display any info. Can this be fixed?

I can still play music, but with no info on the screen I can't do much of anything else. Is this common and can it be fixed?

try reseting it by holding down the select and menu button for like 8 seconds. that should fix that problem and if dosent shoot me another question

After upgrading to Lion, Safari won't display Times font

It just displays as a bunch of capital "A"s in square boxes. Is there a fix for this? Same behavior not happening in Chrome or Firefox.

Try here Andy... All I see is the letter "a": Apple Support Communities

Ipod won't display song info under "Now Playing"

I searched for this, but couldn't find an answer. My 60GB IPOD works fine, plays fine and displays info (and movies, photos, etc.) correctly in all areas except the "Now Playing" screen, at which point it won't display any info (song title, artist, album art, etc.)
Any thoughts?
Thanks,
Patrick

My ipod had this exact same problem.
Go here:
http://docs.info.apple.com/article.html?artnum=303130
hope that helps!
Windows Windows XP Sucky Computer

My external 1tb My Passport won't display

The eternal displayed this morning, was ejected properly, now won't display other than in Disk Utility, however, it won't allow me to access or eject it.

Thanks Tom! Interestingly enough, everything was set properly. The 1tb icon showed up in my 5 year old MacBook Pro so ... took a 5mb external, plugged it in on new MacBook Pro - it displayed fine - left it plugged in, put the 1tb in and it displayed! Some days ... thanks for the information as I hadn't actually done that.

Pavilion g6 updated to windows 8.1 now tv won't display the screen

I cracked the screen of my HP Pavilion g6, so I usually connect it through HDMI to my Coby TV and it usually worked fine. Now, after updating to Windows 8.1, my TV won't display anything. I believe it is because the screen is black, and my TV never displayed a black screen before, it only showed the screen once the laptop has started up. I've tried pressing f4 and i can see that the screen is blue in the small area of my screen that still works, but it still isn't showing through my TV so I don't know how I can fix this problem because I cannot see the screen. Please help!

Hi ke11ie,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that after upgrading to Windows 8.1 your external display(CobyTV) is not working. Just to rule out the TV if you connect to a different display does it work?
Here is a link to Connecting a Monitor, Projector or TV (Windows 8).
Here is a link to Display Quality Issues, that may also be of aid.
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

I just upgraded to yosomite now my desk top won't start

i just upgraded to yosomite now my desk top won't start .

What does happen? Do you get the Apple logo? Do you get a spinning gear below the Apple logo? Does a loading bar appear? Is the screen blue or grey?

T43 screen upgrade xga - sxga+, now won't display

Similar Messages

Maybe you are looking for