T430 audio/video problem

Hi,
I have a Lenovo T430 which has been working for over a year. Recently, I have found that audio/video sometimes does not play. I need to restart my computer and that fixes the problem.
I was wondering if there is a way to fix this permanently?
Thank you.

Hi Avipr10,
Welcome to Lenovo Community!
As per the query we understood that you are facing the issue with Audio/Video on ThinkPad T430.
This kind of issue will occurs if there is an issue with drivers. Please uninstall both Audio & Video drivers from control panel – program & feature option and restart the system.
Download & install ThinkVantage system update utility from Lenovo support page, and run the application so that it will check all the required application and drivers for your system and it will install.
After performing all the above steps restart the system once again and check it once.
Below is the link to enter the downloads page and download latest application accordingly, please click on "Select Product" then in "QUICK PATH" enter the MTM no. select the exact model.
http://support.lenovo.com/en_US/downloads/default.page#
Hope this helps!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

Hi8 capture audio/video problem

I have a Sony TRV740 that will capture my Hi8 movies through Firewire but iMovie will drop the audio every half second or so and when I play the video back it plays at twice the normal speed. Any suggestions?
iMac Mac OS X (10.4.8)
iMac Mac OS X (10.4.8)

No, but I can use Google.
Don't use DV NTSC Basic. Use regular DV NTSC, unless your audio is 32k, in which you'll have to make a 32k DV NTSC preset. There might be a problem with the FW800 connector. Quite a few people are reporting problems with these cables. Definitely use the rear FireWire port. Do you have any other devices connected?

Creative ZEN audio video problem.

!C. Hello Everyone,
I've got a SDHC card 8GB in my ZEN and I converted some family guy videos which are perfect if I play them on the computer.
I have put all the episodes of family guy on my ZEN and when I played it, it just played but the longer it plays the more the video stays behind on the audio. But when I play the SAME episodes which I put on my ZEN, on the computer it just works fine...
HEEEEEELP!!!
Zipert

Zipert wrote:
Hello Everyone,
I've got a SDHC card 8GB in my ZEN and I converted some family guy videos which are perfect if I play them on the computer.
I have put all the episodes of family guy on my ZEN and when I played it, it just played but the longer it plays the more the video stays behind on the audio. But when I play the SAME episodes which I put on my ZEN, on the computer it just works fine...
HEEEEEELP!!!
Zipert
That sounds like a software conversion problem. Try using this program http://forums.creative.com/creativel...thread.id=2983? to encode the video & then? load it on the card. I've used it & it works really good,fast & no playback issues. It also has a preset for the Zen

Audio video problem - help

The audio and video do not stream together - can anyone help?

Have you had a chance to look at this troubleshooting page? It may be of some help: iTunes for Windows: iTunes has detected an audio configuration problem

Sequence Nesting Audio/Video problem

I am nesting sequences, when I playback Sequence One which houses all sequences, there are audio pops (meaning every audio in-cue literally pops) and certain video stutters especially chyrons. When I open each sequence separately for palyback this does not occur. I completed a project recently before this one and this did not happen. I have not changed any presets or preferences.
Help! Thanks in Advance.

Have you methodically rendered & mixed down each sequence individually and then also rendered & mixed down your master 'Sequence One'?

SCCM 2012 Client and Workstation Audio and Video Problems

SCCM 2012 SP1 environment.
We have pushed out the SCCM Client successfully to our systems - however we have found that on some computers the SCCM Client is causing an audio/video problem - specifically it appears to be with computers that connect monitors via DVI. As an example,
on my laptop (Dell e6420, Win7 x64) I have a docking station that connects my laptop to 2 external monitors. With the SCCM Client installed I cannot listen to music or watch videos - the result is an unusable choppiness/stuttering listening to music
and with a video the audio and video get out of sync. As well, my mouse no longer functions smoothly - it jumps around. This happens whether accessing content from a website or simply a local file on my computer. If I uninstall the SCCM client,
the issue goes away entirely. I have tried disabling the SMS and Remote control services but doing so does not resolve the issue, only a client uninstall. Note that this only happens when the laptop is on the docking station - with DVI - it doesn't
happen when the laptop is running without an external monitor or if plugged into an HDMI output device.
At first we believed this was limited to this model of laptop in our environment (Win8 or Win7 - both result in the same problem), but now we are hearing about "audio and video issues" on Dell 990 workstations as well. I believe these stations
have DVI connected monitors. Driver updates do not appear to resolve the issue.
Has anyone experienced this in their environment? Note that this happens on imaged workstations and workstations installed from a vanilla Windows 7 or 8 CD.

Try installing the client without Silverlight and see if it helps (this is only used for the Application Catalog).
ccmsetup.exe /skipprereq:silverlight.exe
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Windows 8.1 Audio/Video Stuttering/Sticking

I just got my Pavilion Touchsmart yesterday and I'm already having audio/video problems. I first noticed it while watching videos on youtube. Videos at a higher definition stutter more than videos at a lower definition. But now I'm noticing it while playing games. It will freeze for about a second and the audio will repeat, but then it will go back to normal. It's doing this several times a minute and I can't stand it any more.
It's a 12 gb laptop, so I'm not sure what could be causing it.
The audio driver that I am using is a Realtek High Definition Audio.

Hi SpencerSDH,
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are having some audio and video problems with your Pavilion. I will be happy to help but I need some additional information. Have you tried a different browser to see if you are having the same issues? What games are you having issues with? What is the product number for your Pavilion?
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Netflix audio/video stuttering

Hardware Overview:
Model Name:          MacBook
Model Identifier:          MacBook2,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          4 MB
Memory:          2 GB
Bus Speed:          667 MHz
Boot ROM Version:          MB21.00A5.B07
SMC Version (system):          1.17f0
System Software Overview:
System Version:          Mac OS X 10.5.8 (9L31a)
Kernel Version:          Darwin 9.8.0
Boot Volume:          Macintosh HD
Boot Mode:          Normal
So I've had this issue with streaming Netflix Instant play videos on 3 different browsers: Safari, Firefox, and Chrome. Streaming works well for a variable amount of time, from 1 minute to 10 minutes. Then, the playback gets choppy and the audio stutters. During this time, when I try to move the cursor there is a significant delay. It's as if my computer is too slow to handle the streaming. But everything else from youtube to hulu works fine.
I've been told by Netflix that this problem is processor related. Everytime I'm streaming, their statistics are showing that my processes are eating up 90+% of the CPU. When I go to Activity Monitor, I see Silverlight plugin (which is what Netflix unfortunately streams through) is the only thing that's causing the high usage.
Netflix has said I should uninstall Silverlight 3 and run an older version. Did that...no success.
Then, they said I should defrag my hard drive but did not give me specifics on how to do it. So when I googled it, I pretty much came to the conclusion that a Mac does not need to be defragged, and even if I did it, the results will be miniscule. So I'm not gonna throw away $20-$40 to buy some stupid 3rd party defrag tool when I don't need it.
So I've come to you, Mac community. What do you think I should do now to fix my choppy audio/video problem?

this is not a laptop or browser issue. this is an issue that has gained noterity and popularity just as of recent with silverlight and netflix. this has been an issue for numerous people, all of which have been using various different browsers, hardware, isps, and operating systems. netflix has claimed ignorance despite multiple complaints from discontent users and proprietors of the company. wootinany, the only effective method of fixing this streaming problem that the anyone has been able to figure out, (since netflix nor silverlight seem to be doing a **** thing about it) is changing the buffering rate of the video you are watching. you can do this by holding shift+alt, Shift+Option(Alt) clicking, then clicking stream manager and selecting manual selection and changing it from the default option of 1050 to a lower buffering rate. this seems to be working for most people but not all. since there is no way to save this preference, unfortunately you must select your buffering rate every single time you start a new movie. if this doesnt work try deleting your facebook account and mailing tons of money and/or drugs to 1375 williams st. #102 denver CO. and upon reception of said comodities i will send you an email of thanks and say a meditative mantra in hopes that your problem will be fixed which will hopefully do something. its worth a try. preffered drugs include in this order, heroin, marijuana, cocaine, any form of psychedelic(preferreably DMT) and heroin. send any of these and i will say the mantra to fix your problem. again, wootinany.

Unsycnonized Audio / Video in Premiere Elements 2.0

Hi everybody.
I've always had an audio / video problem in PE where, as the video plays, the audio will get further and further behind the video. Now I always just attributed it to something with my computer, because if I pause the video, wait a second, and then play it again, the audio will catch up and I can start the process over again.
But the other day a burnt a DVD of a video and when I started to watch it on my TV, I saw the same thing happening. After about 15 minutes, the audio was a full two seconds behind the video.
The file was downloaded off the internet and is in an AVI format. Can anyone help please?

Welcome to the forum.
What you are experiencing is OOS (Out Of Sync) and your is dynamic, i.e. drifting. This is common with many source files.
Here is an ARTICLE that will help you find out about your .AVI file.
This ARTICLE will help you work on OOS, but conversion to DV-AVI Type II w/ 48KHz 16-bit PCM/WAV Audio will most often fix it, so you do not have to do the "heavy-lifting."
Good luck,
Hunt

Premiere Pro CS6 importing/ audio and video problems

I recently recorded gameplay from my xbox, when i open this recording using windows media player it states that the video is 3 hours 30 minutes long, which is correct, when i then import this into premiere pro, premiere pro changes it to be 5 hours and 44 minutes long, when i then play this back it plays in slow motion and audio and video start to desync, i thought it may just be the source editor playing up so i made a clip and put it into the timeline and it still had the same outcome. The speed/duration are still on 100% so im not sure what to do, anyone have any idea as to what this is, or why it is happening?

What are the attributes of your PVR video...
specifically, is it variable frame rate?
Media file evaluation utilities:
GSpot
http://www.headbands.com/gspot/
MediaInfo
http://mediainfo.sourceforge.net/en
If it is VFR, Premiere no-likey.
Variable frame rate video problems:
http://forums.adobe.com/message/4897424#4897424
http://forums.adobe.com/message/4071506#4071506

I just moved my itunes library from a win 7 computer to a win 8.1 computer. Getting an error message "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can't play CDs or get audio file from web!

Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.

I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
However, I would also like to rent movie's from iTunes,
Would be great if iTunes would let you choose the output device, too, like most other applications using sound from Skype to Windows Media Player,...

'Source play' and 'audio-video sync' problems with PE8 on fast WIN7 64 bit computer

I am transferring Hi8 videos, about 2 hours long, to my WIN7 64 bit computer with PE8. [Dell Mobile Precision M4400 Computer Workstation (Intel Core 2 Duo T9900 500GB/4GB); NVIDIA Quadro FX 770M, 512MB] I seem to have several problems:
First, after importing the file (.avi), I get a message about ‘dropped frames.’
Secondly, when I try to play the video in the source monitor, the audio plays but the video doesn’t; it only shows the first frame [this is after waiting until the video is ?recognized? ] I can use the shift-arrow key and see that the video is there.
Thirdly, I can play the .avi file in other players, e.g., avidemux or PE pro CS5 on another computer. There, I see that the audio and video are not in sync; the audio can be up to 300 ms ahead of the video (as determined using avidemux).
Questions:
1. Why doesn’t the source monitor play the video? Is this a problem with PE8 (latest update as of 3 March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?

"I think you're telling me you're using a backwards compatible Digital8 camcorder to capture your video as DV-AVIs. Is that right?" YES
"Are you using Premiere Elements to do this capturing?" YES, AS ABOVE PE8
"Go to the File menu and select Properties. It should show a standard DV codec being used for your video and audio."
WMP v12 is dumb. Under properties, media, it says 'video.' However, avidemux gave me the information state above: video -- Codec 4CC: dvsd, frame rate: 29.971 fps; audio -- codec: PCM, channels: Stereo, frequency: 48 kHz.
So, back to the Questions:
1. Why doesn’t the source monitor play the video? Is this a problem with PE8 (latest update as of 3 March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share form

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

The big iChat problems. Audio/Video (now completely broken in 10.7.3), the "not-authorized" problem

So, I am running iChat on OS X Lion 10.7.3 on an early-2011 MBP 13'' . These problems have been here for a while, though (I got my comp with 10.7.0). I have AIM/GMail/Yahoo connected..
One problem is the issue of non-authorized people. There is a list of "not authorized" people that I have to scroll past in my "offline" section of iChat buddies before I actually get to the real offline contacts. Big note here: All these people have the address (something)@aol.com. These contacts have come up as a result of my gmail connection. You see, a few months ago Gmail and AIM did this chat unification process where @aol.com contacts can be just added into Gmail for chatting. These @aol.com copies come up asking for an invite when the REAL AIM address person talks to me. The invites leave once I press decline, but then they stay on my list as not authorized. If I delete these "not-authorized" copies, the invites will come up again and the cycle will repeat. It is a nuisance considering how much of these false contacts are on my list.
Second problem is video/audio chat in general. This issue really applies on AIM/Yahoo—there is nothing for Gmail because people usually use the web interface which simply doesn't work with iChat video/audio. If the people used Google talk, the issue written below would probably come up.
See, what happens is that…(now in 10.7.3), video/audio chat is simply broken, simple as that. My contacts always tell me that an error has occurred when trying to accept my video chat invite. It simply doesn't work. They are using AIM desktop in most cases. When it DID used to work (to a very limited extent, I'll say; it was hit or miss earlier pre 10.7.3, now it's just miss), it was just video but NO audio. They could see/hear me, I could only see them. When I did audio chats, they hear me, I..don't hear them (so audio chats were pointless). The only case where this problem doesn't happen is where it's Mac to Mac, iChat to iChat. VERY limited in use of audio/video chat, if you ask me.

Hi,
If AIM contacts have been added to your Google Buddy List then I would login to Google and remove them from there (the iGoogle or GoogleMail web pages will show the Chat option)
Whilst they are still in the List then the Authorization request will probably be resent (In this case it is probably being generated by the method Google are using to add the AIM names as iChat only sends it once).
Google/Jabber Video chats is only iChat to iChat and so is Yahoo with iChat 6.
The Yahoo App streams Video which People can be allowed to see and Audio is added in as an Audio Chat.
The connection Process is not the same and iChat/AIM
Jabber and Google use Jingle to Connect (in fact Google's version is not that compatible with other Jabber apps).
This means iChat to the Standalone PC app or any Web Browser using the Google Video Plug-in (PC or Mac) or to any Jabber app that is using a Google ID (or a Jabber ID) will not work.
On the iChat to AIM on a PC.
This has always been a bit of a hit and miss affair.
Some people have no trouble but other spend ages trying to set things up and never find the solution.
This is the Original Users Tip (up to about AIM5.9)
A "replacement" for that tip that has not made it across yet.
I have yet to try Video to the Web Login version that is now on offer.
However I would limit the Bandwidth in iChat Menu > Preferences > Video Section to 500kbps (possibly try 200kbps for 1-1 chats) as you will not know the interent speed available to the Buddy if they are using the web login.
Comparisons
When you compare iChat actual functions to what you would like it to do it can appear to be limited.
On the basis that you would want your IM app to be able to have Buddies from other services listed in a Buddy list (combined) or Lists which apps do you know of can do that and Video to some of them ?
Adium and ProteusX can both have Buddies from the major Services ina Buddy List but don't do Audio or Video.
Yahoo and MSN both allow the other's Buddies in the list but I am not sure about Video or Audio chats
They cannot connect to Jabber or AIM buddies even for text chats.
Jabber does depend on the server you use and whether that does Transports for you to have text chats with other services.
Instructions for iChat.
Mercury IM is a JAVA version of MSN and still has not got to Audio and Video
Similar for aMSN
Gizmo5 and YakforFree both died...
Skype is Cross Platform but is only 1-1 in Video chat. (cost extra for 3 and 4 way chats)
Yahoo had dropped support for their Mac version now iChat has the Yahoo option (you can still download it - IT being the beta it has been for years).
2:40 PM Saturday; February 11, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Error message after upgrade to iTunes 11: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point my PC running XP loses all audio.

Several attempts to upgrade to iTunes 11 have failed. After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray. Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
I did that. I reinstalled iTunes 10.5. Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
What might be the problem with my audio configuration?
Why doesn't my iPhone 4S work with iTunes 10.5? It used to work with iTunes 10.5.
Please advise.
ep

This forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards.

T430 audio/video problem

Similar Messages

Maybe you are looking for