T430 External Upgrade Query

Hi ,
I have T430 Thinkpad Notebook with the following Config :
- Processor : Intel(R) Core(TM) i5-3320M CPU @ 2.6ghz
-Ram :8GB
-Display adapter: Intel(R) HD Graphics 4000.
Express Card Slot available .
OS : Window 7 enterprise 64 Bit
Query : I am not satisfied with Intel(R) HD Graphics 400 and wants to attach a External Graphics Card/GPU :AMD/ATI HD 6670 1 GB GDDR5 Graphics Card to it using the express card slot available .
-My concern is if the T430 is compatible with this card or any Higher config Graphic Card if attached .
-If it is compatible what all hardware is needed other than graphics card to to make this attachment work.
Regards
Gaurav
Solved!
Go to Solution.

google ViDock 4 or eGPU, there are lot of instructions on this sort of external GPU setup.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

T430 BIOS upgrade from original 1.11

I purchased a T430 23445PU that came with Windows 7 Pro and the BIOS ver sion 1.16. I want to be able to upgrade the PC to Windows 10 when it becomes available. The question is: Do I need to update the BIOS to the latest version, and if I do, can I update to the latest version directly without incrementally updating through previos versions? Thanks for any advice. LarryT

Hi LarryT,
Thank you for the reply!
I am unable to understand your query on UEFI.
But I want to inform you that Windows 10 will support on both the partition table (GPT & MBR), it is not mandatory that you have to use UEFI settings.
Note: There will be no drivers, or limited drivers for your model as it is not listed under Windows 10 supported system.
MICROSOFT WINDOWS 10: LENOVO SUPPORTED SYSTEMS
Hope this helps.
Best regards,
Hemanth Kumar

Repair Problem with Excel Removing All But First External SQL Query Tables

We have an Excel 2007 XLSX workbook that we created for doing some business analysis from the SQL database that contains data from our MRP system. It started as a single sheet with one data connection running a SQL query. The data comes into
the spreadsheet as a table and there are some basic row and column sums being done.
After getting the first version up and running without problems, we decided to add some additional sheets to the same workbook. Since each of these additional sheets had only slight variations to the SQL query and the formatting was all to be the same, we
simply copied the first sheet and modified the data connection for each successive sheet (each copy automatically created a copy of the data connection as well). Everything seemed to be up and running properly, so we saved and closed the workbook.
A little bit later, the same workbook was re-opened and Excel reported that "Excel found unreadable content in '<file name>'. Do you want to recover the contents of this workbook? If you trust the source of this workbook, click Yes." If Yes
is clicked, then Excel indicates the repairs that were made. Only one was made for each sheet beyond the first and that was "Removed Part: /xl/queryTables/queryTable2.xml part. (External data range)". The result was that the data connection
was deleted from every sheet other than the first and only static data left in place.
We thought it might have actual been some corruption, so we deleted the static sheets and recreated them the same way. After saving and closing, re-opening the file resulted in the same problem. It seems that Excel is somehow saving data that it can't read
when it opens. I would think it could be something in the SQL query, but all sheets have essentially the same SQL query, so I'm not sure why the first sheet survives. As a result, I think it must be something that it does in copying the sheet and the corresponding
data connections, but I'm not sure.
I think this might be some kind of bug, but would like to know if anyone else has encountered a similar problem and found a solution. A few internet searches didn't give me much to check out.
Thanks in advance,
indyvql

KR,
Thanks for your response. I don't think it applies in this case since the file was created brand new in Excel 2007 and used in the same. There was no 3rd-party program involved. I'm also not migrating from 2003 to 2010 as the stellarinfo.com article
suggests. Some of the other suggestions there also don't make any difference as all the data links are lost on opening the worksheet, so copying and pasting doesn't do any good.
I tried to create a simple example by creating a new workbook with a sheet with a very simple SQL query ("select * from X where a > b"), but in that example it worked fine. I'm guessing there is something key about the much more complex SQL query
in my original file with the problem, but I'm not sure why it would only affect copies of the data connection and not the original data connection itself.
Thanks,
indyvql

External Table Query

Hi
I created a table and created directory and gave grant permission to that directroy for read/write and able to create an external table but when trying to query the same iam getting the below error.
SQL> ed
Wrote file afiedt.buf
1 CREATE TABLE text_ext (city VARCHAR2(30),
2 country VARCHAR2(30),
3 population NUMBER)
4 ORGANIZATION EXTERNAL
5 (TYPE oracle_loader
6 DEFAULT DIRECTORY MV_DATA_EXTRACT
7 ACCESS PARAMETERS(records delimited BY newline
8 badfile 'test.bad'
9 logfile 'test.log'
10 fields terminated by ','
11 optionally enclosed by '"'
12 missing field values are null
13 )
14 location ('foo.dat')
15* )
SQL> /
Table created.
SQL> select * from pop_ext;
select * from pop_ext
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
error opening file C:\Xtern_data\mv_data_extract/test.log
could you please advice.
thanks in advance.

user10991018 wrote:
Hi
I created a table and created directory and gave grant permission to that directroy for read/write and able to create an external table but when trying to query the same iam getting the below error.
SQL> ed
Wrote file afiedt.buf
1 CREATE TABLE text_ext (city VARCHAR2(30),
2 country VARCHAR2(30),
3 population NUMBER)
4 ORGANIZATION EXTERNAL
5 (TYPE oracle_loader
6 DEFAULT DIRECTORY MV_DATA_EXTRACT
7 ACCESS PARAMETERS(records delimited BY newline
8 badfile 'test.bad'
9 logfile 'test.log'
10 fields terminated by ','
11 optionally enclosed by '"'
12 missing field values are null
13 )
14 location ('foo.dat')
15* )
SQL> /
Table created.
SQL> select * from pop_ext;
select * from pop_ext
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
error opening file C:\Xtern_data\mv_data_extract/test.log
could you please advice.
thanks in advance.First, you are not showing us something. You created table TEXT_EXT, but you are selecting from table POP_EXT.
The error is pretty clear, it can't open file 'C:\Xtern_data\mv_data_extract/test.log'. This is obvously Windows. What's with the *forward* slash (between 'extract' and 'test.log') in the file spec?

74 upgrade: query properties field: Operation in BWA/HANA

Dear all,
once we upgraded to BW 74 SP09 we experience some issues regarding query properties. In particular some queries are not having same value of field "Operation in BWA/HANA = RSRREPDIR-TREXOPS".
The value of the field in RSRT is different comparing to table. As example query has setting set to "6=exception aggregation (default)" however the corresponding field in the table is blank. My consumption was that all the queries after the upgrade should be set to value "2=Individual access per IProv".
I expected this as per SAP Note "1790426 - Processing MultiProviders in BWA" which saying about official SAP recommendation value of the field.
My questions:
1. Anyone experiencing same inconsistency between table and RSRT value?
2. What is than really recommended value? E.g. in BW74 SP09 the option 6 has a word "default" in brackets.. but above mentioned Note says differently...
PS: our BWA version is 7.20.32.00
Thanks,
martin

This is a Duplicate Post. [url https://forums.oracle.com/forums/thread.jspa?threadID=2401881&tstart=0]Original Post Can be found here.

N79 firmware upgrade query.

Hi. I'm probably one of the few who have this troublesome phone, and, not wanting to brag, I'm on my 2nd one which is working absolutely fine with no problems at all!
My query is though, should I upgrade to the V.20 firmware when it becomes availiable or keep things as they are?
I only ask because it seems that many who upgraded to v.20 have been plagued with new minor issues which I'd like to avoid if poss.
Be greatful for any thoughts on the matter.
Jurassic Park, Sam Neill to Dickie Attenborough " Mr. Hammond, the phones are working !"
N8-00 Tesco UK 059C951, Lumia 920

If you are happy with your phone the way it is then that is a good reason not to rock the boat. Firmware update is risky business.
Updates usually only contain bug fixes and sometimes a new feature or two. They sometimes also remove features. What you could do is to check the Changelog for the update andsee if there are any bug fixes or new features in the update that will make a difference to you. Changelogs are not published by Nokia but usually available on other sites so just google for it.
However, if you are like me and have to have the latest of everything then update with your fingers crossed.

Technical Upgrade Query Issue .

Dear ,
We are updating our system from ECC4.7 to ECC 6.0 .
I come across the issue that Queries are not updated in system .
Some of the queries I have resolved by going in transaction SQ01 simply by acivating it and execute but in some of the
objects query name does not exist in old system but report execute there .
In new system 6.0 this not even executing . What the problem that not able to identified .
For example :
Query is this : AQFKSYSTQV000015ZPODET========
Query name is : ZPODET
This is not exist in both the system but its running fine in old system .
Please suggest any solution for this if u have any .
Rgds Aryan
Edited by: Aryan@sap on Nov 11, 2009 10:59 AM

Hi,
This is the most common issue faced during the Upgrades.
1) First go to SE37 and execute the FM: RSAQ_GENERATE_PROGRAM by entering the Query name and the User group.
2) You can get the link for SAP Query and User groups from the table AQLQCAT(local areas) and AQGQCAT(global areas)
3) Finally after the query is generated, you will get the program name as output of the FM.
4) Check this program exists in SE38.
If you want to generate more queries try writing a simple report using the above logic....
OR Simply go to SQ01 and try to generate each query from the menu->Query>More Functions->Generate Program
The same process needs to be done in all the systems(old/new/dev/quality/prod systems)
For your help, AQFKSYSTQV000015ZPODET======== the name of query and user group can be determined as:
First 4 char : system specific
Next 12 Char : User Group
Next 12 Char : Query name.
Wherever names are less than 12 chars then the = are added.
Hope this helps
Regards
Shiva

Upgrade Query from 2.2.1 to 3.0.1

Hi,
We just upgraded to Apex 3.0.1 from Version 2.2.1 and all appears to be functioning correctly but I just have a query regarding the following error during the upgrade, i.e.:
select UPGRADE_ERROR from flows_030000.WWV_FLOW_UPGRADE_PROGRESS where UPGRADE_ERROR is not null;
UPGRADE_ERROR
ORA-02298: cannot validate (FLOWS_030000.WWV_FLOW_COLLECTION_FK) - parent keys not foundIs this something that we need to be concerned about - if so, is there a fix for it?
FYI - in addition to the above, our DBA tracked down that the constraint is actually DISABLED ?
Thanks.
Tony.
Message was edited by:
Tony Fatouros
Message was edited by:
Tony Fatouros

Hello,
I believe your query has a couple of syntax errors in the concatenation (no space between the case's end and the column alias + a strange concat at the end: "x.NAME ||;") - not sure they were not found by Apex v3 compiler or some characters were mistakenly missed/added in the migration to Apex v4.
Try:
DECLARE
vSQL VARCHAR2(32767);
BEGIN
vSQL := 'select vehicle_sn';
FOR x IN (SELECT ID, NAME FROM PARTS ORDER BY NAME)
LOOP
vSQL := vSQL || ', CASE WHEN ID = ' || x.ID || ' THEN INSTALL_STATUS ELSE ''-'' END '|| x.NAME;
END LOOP;
vSQL := vSQL || ' FROM VEHICLES ';
RETURN vSQL;
END;Let me know if that helps.
Edited by: Kleber M on May 4, 2012 5:37 AM

R/3 4.7 Unicode upgrade query

Dear All,
I have a very specific and unique query. We are implementing ESS, MSS, MBO for our clients, and in the process have upgraded the production servers to R/3 4.7 version ( Non - Unicode ). We're using EP 6.0 as the front for the same .
My question is as below :
Today the client is not interested in having interface other than english, but moving down the line after 2 years he would like to have a Korean language interface, which might require R/3 4.7 with Koran language unicode and functions converted.
What I want to know is whether this effort in upgrading to the unicode version of Korean on R/3 , before we actually implement ESS / MSS etc is better or should we upgrade to a unicode version 2 years later ?
In either case what are the advantages and disadvantages ?
Expert insight sought,
Regards,
Neeraj S.

Hi Neeraj,
Personally, I would recommend upgrading to Unicode now.
With your client there already appear to be signs that a non-unicode format is unsuitable for the longer term vision of the company...
What if this long term vision becomes a more immediate requirement and they no longer want to wait 2 years?
Additionally upgrading to unicode would mean that all custom programs would have to be made unicode compliant. This is a Particularly arduous problem if there is any hexa-decimal manipulation within the custom programs...
Within a Unicode system all programs are automatically made Unicode compliant (as long as the appropriate flag is checked in the program attributes)...
Therefore, if you can implement Unicode now then I would go for it
I hope this helps.
Hafeez

T430 RAM upgrade to 16/32GB

Hi,
I want to upgrade my t430 Laptop to 16/32 GB RAM. When I purchased this laptop, Lenovo store told me that this laptop has only one open RAM slot and he added 8 GB RAM and told me that we can not upgrade this laptop to 16/32 GB RAM. But I have a doubt because in the laptop specification it is clearly written that this laptop can be upgraded to 16/32 GB RAM...Can somebody provide me clarity about it.
Regards
Rajaniesh
Solved!
Go to Solution.

rajaniesh wrote:
So what is the final Verdict ?
The jury is still out.
There are at least two issues currently being deliberated by the jury that preclude a final verdict
1. Even if the chip architecture supports 32GB the motherboard in the T430 may not.
2. Even if the chipset and mobo support 32GB you can't buy 16GB SODIMM modules.
Why do you feel you need more than 16GB?
Cheers... Dorian Hausman
X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30

R12 upgradation : query regarding patch 7461070

I have to apply patch 7461070 as a part of upgradation. It's written in patch note that "must apply critical patch 6767273:R12.AD.A before applying the AD Mini pack". But how to check that instruction are not clear.
FI :
We only have izuprod.txt file under 11i APPL_TOP/admin
$ ls -ltr *prod.txt
-rwxr-xr-x 1 egapc2d appseeg 231650 Oct 30 2004 applprod.txt
-rwx------ 1 egapc2d appseeg 4966 Oct 20 2006 izuprod.txt

Run the query in (How to tell what your current AD patchlevel is. [ID 390671.1], under "Release 12 Single Tier" or "Release 12 Multiple Tiers" section), if you are on (Patch 4502962 - R12.AD.A) then you need to apply (Patch 6767273) before applying (Patch 7461070).
Thanks,
Hussein

UCS B200M2 Version 2.1(1d) to 2.2(1d) upgrade Query

Hi,
I am planning to upgrade our UCS B-Series server(B200M2) to 2.2(1d) from 2.1(1d).
While i was reading the Cisco document for the upgrade, they were specifying about a bug CSCuh61202 ( https://tools.cisco.com/bugsearch/bug/CSCuh61202 ) .It is saying that "If you are upgrading from a release prior to 2.1(3a) or 2.2(1b), you may be impacted by CSCuh61202.".
But while i am reading about the bug, it that it is saying that the affected version is 2.1(2a)A.
So my question is, should i bother about this bug ,since my current version is 2.1(1d). ????

Hi friend,
in our environment also, its full of cisco devices and mostly all devices were affected by this shellshock bash vulnerability. i contacted cisco TAC for querying about all those devices we implemented but since each TAC engineer are specialized on a specific domain...they were unable to answer all. Other wise i need to raise separate TAC for each devices. when i checked their releases before few days, they said that there is no work around at the device side. They asked to harden the firewall and IPS. Actually they released IPS signature to prevent the shellshock attack.
Also you should upgrade both infrastructure and server firmware. Both firmwares should be of same version.
I recommend you to open a TAC request and keep the engineer on hold while you performing the upgrade process.

POS-Siebel Integration (External Orders Query)

Hi,
I have to implement POS and siebel integration for querying and retrieving external orders from Siebel in POS using an out-of-box integration method @
https://docs.google.com/viewer?url=http%3A%2F%2Fdocs.oracle.com%2Fcd%2FE12517_01%2Fback_office%2Fpdf%2F133%2Fsss-133-imp4.pdf
After doing all the setup required at both ends, whenever i go to query external order in POS it shows me this message : "The system is currently offline. The orders cannot be retrieved for payment during offline."
Please advise how to proceed further.
Also for configuring DefaultConnectorTechnician.xml the mystoreID and pwd are POS admin username and password???
Thanks in advance,
Ayush

Hi,
Have exposed the web service from Siebel side and also the both Default and retail technician XML files in POS have been updated to proper webservice URI: "http://<Host>:<port>/eai_anon_enu/start.swe?SWEExtSource=SecureWebService&SWEExtCmd=Execute"
Still the error msg appears stating: The system is offline.
Do i need to bounce the Oracle Retail POS server before the changes take effect??
Or is there any more setup that i need to verify in siebel to make sure the webservice respond correctly???
Regards,
Ayush

EHP4 upgrade query

Dear All,
We are planning to upgrade our PRD server. We are upgrading from ECC 6.0 to EHP4 in dual stack (ABAP+JAVA).
We are running cluster in Active Passive mode.
DB + ASCS + APP server on node 1 and node 2 is for fail-over switch and one DI instance on node 2.
We will disable clustering before the downtime phase.
I am having the below queries.
1.We are running ERS03 for abap and ERS 04 for java on node2.
As per SAP Note 1012486 we should disable ERS before downtime phase.
Please advice we have to only stop the instance ERS03 and ERS04 .As in cluster it is not configured.
If we are running startsap command on node 2 it is starting ERS03 ,ERS04 and DI instance.
Please advice how we can disable it
.SAP Note 1012486
If you have manually set up a standalone enqueue, you should
revert this configuration prior to the execution of the
downtime phases of the upgrade, latest prior to kernel switch
phase. The upgrade tool is unable to detect a manual set up of
standalone enqueue servers and, therefore, cannot update them.
This might cause problems when the system is started for the
first time after the kernel switch. This only applies to
standalone enqueue servers (separately started enserver
process), NOT to officially supported (A)SCS instances.
2.As we are running ABAP+JAVA stack.
As i checked in SDN.. somone suggested the below method to overcome profile issue's.
Please help to understand this.
If you have a SAP level clustering you will face issues while patching your JAVA instance as in profile directory JSPM/EHPi scans for the available profiles and the patches accordingly however when two profiles are found it runs itno conflicts and does not allow you to proceed further - To solve this problem as a workaround you need to move the other/mirror/clustered systems profiles into other directory asay /usr and once your EHPi installation is over move back other/mirror/clustered systems profiles into cdpro directory.
3.ASCS will be required to be stopped manually.Will SAP prompt to stop or i need to do it before downtime phase.
Regards,
Sahil Garg

Hello Sahil,
I hope I've understand your questions right...
1)
I think you're right - to stop ERS03 + ERS04 but here you should contact the sap support - to make sure that this is not a big mistake.
2)
You should ensure, that only one profil should be available for the installer - so the installer searches for profiles and your mirror/clusterd systems have several [ more than one ] profiles.
So you should "move the other/mirror/clustered systems profiles into other directory asay /usr " - you have to move your profiles in a temporary directory [ tmp\ ] - so the installer didn't recognise them.
After your EhP installation you have to move the profiles back to the source directory.
3)
The installer will prompt you - but downtime means that your colleagues are not able to work ...
=>sure at all its a good think to make a reboot of the whole server - so you will see that there is everthing fine - profiles, executables etc.
By the way - if it is your first EhP installation you should have one test-system - only for ehp.
best regards

General upgrading query of iMac G5 1.6ghz 17" OS 10.4.11

hi
ive just purchased my first iMac as above for my son as his 1st desktop.
im in the process of upgrading the RAM to 2gb and looking into purchasing Leopard 10.5.
could anyone advise whether there are any other 'home' upgrades i can carry out to maximise this unit's potential for online use in 2012? and whether these 2 initial upgrades should give noticeable increase in performance to warrant the spend? i do have an iPhone4 and wish to use this unit for connection via iTunes.
he currently likes to play online games such as 'Minecraft' and we have found it very slow so far...the unit does have the Airport wireless card installed, no bluetooth though.
many thanks for any advice.

Upgrading the RAM and the OS will certainly help performance, the highest you can go is 10.5.8 and you will also have maxed out the memory. For a real speed boost, you need to get an intel machine and install Lion.

T430 External Upgrade Query

Similar Messages

Maybe you are looking for