T430 gets BSOD when enabling NVidia NVS 5400M.

I don't quite understand how, but when I started using the notebook everything was fine. It even did an update of WDDG 1.1/2 drivers through Windows Update (which I can't find to undo). Today I bought a cable to actually connect to an HDMI. But couldn't find it. I found out that it was in Intel mode. Which surprised me bacause I had toyed with the NVidia Control Panel. When I tried to force the NVidia mode, I couldn't. Thus, I got into the BIOS and forced the Discrete Option. But each time I enable Discrete or NVidia Optimus, I get a BSOD at boot time.
I've updated every driver I could only through ThinkVantage Update and Drives and Windows Update. Nothing downloaded from anywhere else. What can I do?

The T430 has Optimus, which means the Intel chip handles most of the work and the nVidia chip kicks in only when there is some heavy lifting. I find the BIOS is generally best left in the auto-detect or Optimus mode, unless you have severe problems or are using an operating system that Optimus doesn't work with.
Ideally you would want to use the current drivers from Lenovo (It looks like these are the correct ones http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT073828 ), which might require a rollback by installing an older version over a new version. If those don't work then I would experiment with the drivers from the nVidia site.
When asking for help, post your question in the forum. Remember to include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help others with the same question in the future.
My TPs: Twist 2HU: i5-3317U Win 8 Pro, 4GB RAM 250GB Samsung 840 | T420 4177CTO: i5-2520M, HD+, Win 7 Pro x64, 8GB RAM, Optimus, 160GB Intel 320 SSD, Intel 6300 WiFi, BT 3.0 | T400 2764CTO: P8700, WXGA, Win 7 Ult x64, AMD 3470, 8GB RAM, 64GB Samsung SSD, BT, Intel 5300 WiFi | A20m 14.1" PIII 500 (retired). Monitors: 2x Dell U2211h IPS 100% sRGB calibrated w/ Spyder3.

Similar Messages

Nvidia NVS 5400M overheating in T430

Hello,
I recently bought a new T430 with a built-in Nvidia graphics card to replace my old T420 with a machine capable of a little gaming.
However, when I play a (3D) game for about one hour, the notebook suddenly switchs off, as if I cut the power. Also, during gaming the notebook gets really hot, GPU temperatures rise above 100°C.
It seems to be happening more frequently when the notebook is NOT inside a docking station and I use the internal keyboard for gaming.
Are there any hints on how to resolve this issue?
Emanuel

Maybe this will help. Anywho, if you opt for NV5400M you'll still be able to use Intel HD Graphics since it comes with your processor. In general, running Intel HD Graphics will be more beneficial if you plan on using your laptop while away from AC since it uses much less energy. As far as processing power goes, NVIDIA is way better. We cashed those 80 bucks more and got NVIDIA and IMHO it's moneys well spent.
T530: i7-3630QM, 4 GB DDR3-1600, NVS 5400M, 2x 500GB 7200RPM, 9-cell, HD+ 1600x900, Backlit US, WinXP Pro
L430: i3-2370M, 4 GB DDR3-1600, HD 3000, 320GB 7200RPM, 6-cell, HD 1366 x 768, Win7 Home Premium 64-bit

Once windows installed in partitioned disc and run the installer for support software only get BSOD when restart. Help!

I've tried reintstalling about 3 times, changing order of operations, still get blue screen.
When I install windows and follow all directions it works fine. Once I install the apple provided support drivers and the computer restarts it manages to stay on for about 15 seconds before blue screening.
MacPro Mid2010 2x2.4Ghz
16 gigs of ram
2 - 5770 Ati radeon 1024 MB video cards
I have latest lion updates and ran the updater
I have a brand new windows 7 installation disc, i have tried both 32 bit and 64.
boot camp that is in my OSX is 3.0.4 (322), but it does download the support software for windows which i save in a separete usb stick.
and I am doing the partition on a relatively new hard drive 500 gigs thats been partitioned.
Any Ideas?
I've attached of a photo of the blue screen message.
Cheers,
Paco

Pull all the other hard drives?
Upgraded to Boot Camp 3.3 already?
Have an Apple software RAID on other drives - AppleHFS and AppleMNT to mount and read HFS volumes - is buggy
you didn't burn the DVD from ISO etc right?
Safe Boot and rename AppleHFS.sys and MNT to .sys.old
Install MacDrive instead to access HFS
Who what or how did you partition the drive? normally I would just use Windows 7 DVD and not use BCA or share the drive with OS X.

New iTouch...getting BSOD when trying to sync

I got my iTouch for Christmas and am very disappointed. Every time I would try to sync it I get the BSOD once music has been uploaded to it. I've got 3 music videos on it, none of my "tv shows". Forget trying pictures. Would be nice, but...with the problems I'm reading about. Oh and the charge I get last me 4 hours tops and this was after charging all night. Any suggestions? I call Apple and am told this is a Vista problem. I call Microsoft and told it's an iTunes/Apple issue (have a 2 year old iPod Touch). I can't even play video on my HP laptop that I have purchased through iTunes. I'm not liking Vista, but I'm really starting to not like the iPods/iTouch.

32 bit or 64 bit Vista?

Adobe Connect gets hanged when enabling/disabling audio

Hi everyone!
My name is Dani and I'm from Spain.
We've just started using Adobe Connect but we are facing an unknown issue. (Art least, it's unknown for me )
I start a meeting as a host, then 2 or 3 people connect to it as guests, and then, everytime I enable or disable my own audio (through the direct icon) the entire platform gets hanged for 2 or 3 seconds. Very annoying!
We are using the adobe connect add-in in a computer with that configuration:
- Dell Optiplex 760
- Windows 7 x64
- 8 GB RAM
- Microsoft LifeCam HD
- ATI radeon graphic card (256MB)
- A DSL dedicated simetric line
Your help would be appreciated!!
Thanks in advance!!

Hi everyone!
My name is Dani and I'm from Spain.
We've just started using Adobe Connect but we are facing an unknown issue. (Art least, it's unknown for me )
I start a meeting as a host, then 2 or 3 people connect to it as guests, and then, everytime I enable or disable my own audio (through the direct icon) the entire platform gets hanged for 2 or 3 seconds. Very annoying!
We are using the adobe connect add-in in a computer with that configuration:
- Dell Optiplex 760
- Windows 7 x64
- 8 GB RAM
- Microsoft LifeCam HD
- ATI radeon graphic card (256MB)
- A DSL dedicated simetric line
Your help would be appreciated!!
Thanks in advance!!

T530 with 2 display adapters - NVIDIA NVS 5400M and Intel HD Graphics 4000 Drivers not loading

Both the Nvidia and Intel graphic drivers show in device manager that they have problem and can't load properly. I have tried uninstalling both they both reinstalled on a reboot with same issues. Is this hardware or corrupt drivers?? Or?

Failure progressed to a point where I could login remotely (GoToAssist) and see the screen but the LCD and External Monitor both were black.
Called tech support, they dispatched a tech (after 3 days, and a bunch of phone calls). They replaced the system board and display board? same problem. Their answer was I needed to reimage the machine.
I found out that Windows had done an update. We did a system restore to before the update (30 some updates) and restored the local displays.
BUT....both the NVidia and Intel HP Graphics devices in Device Manager indicate problems. And this was after reinstalling the video drivers I pulled down from Lenovo.
Any thoughts on where I go next?? Lenovo has washed their hands of this problem....
I am about to wash my hands of Lenovo as a vendor for PCs.
Larry

Get BSOD when I upgrade to anything above 3.x. Using XP sp3.

Tried upgrading to Firefox 4.x, 5.x, 7.x.
PC crashes after several minutes while browsing, every time..
Reverted back to 3.6.23. No problems.

You're welcome

BSOD when starting MSMQ service as domain user Windows server 2012

Hi
We have a problem with a server getting BSOD when we start a service related to MSMQ. We get the attempted execute of noexecute memory BSOD whenever we start the service as a User on the domain. When we start the service as a system local it starts without
problem. I got the crashdump here:
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Microsoft (R) Windows Debugger Version 6.3.9600.17298 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\170\120314-11828-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9200 MP (4 procs) Free x64
Product: Server, suite: TerminalServer SingleUserTS
Built by: 9200.16912.amd64fre.win8_gdr.140502-1507
Machine Name:
Kernel base = 0xfffff800`48476000 PsLoadedModuleList = 0xfffff800`48742aa0
Debug session time: Wed Dec 3 14:41:01.892 2014 (UTC + 1:00)
System Uptime: 0 days 0:04:09.904
Loading Kernel Symbols
Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck FC, {7f982e340e0, 791000010fdb1025, fffff8800485a5e0, 80000005}
Probably caused by : mqac.sys ( mqac!ACCreateQueue+a77 )
Followup: MachineOwner
1: kd> !analyze -v
* Bugcheck Analysis *
ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (fc)
An attempt was made to execute non-executable memory. The guilty driver
is on the stack trace (and is typically the current instruction pointer).
When possible, the guilty driver's name (Unicode string) is printed on
the bugcheck screen and saved in KiBugCheckDriver.
Arguments:
Arg1: 000007f982e340e0, Virtual address for the attempted execute.
Arg2: 791000010fdb1025, PTE contents.
Arg3: fffff8800485a5e0, (reserved)
Arg4: 0000000080000005, (reserved)
Debugging Details:
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT_SERVER
BUGCHECK_STR: 0xFC
PROCESS_NAME: mqsvc.exe
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) amd64fre
TRAP_FRAME: fffff8800485a5e0 -- (.trap 0xfffff8800485a5e0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=000007f982e0c950 rbx=0000000000000000 rcx=0000005dff1fecd0
rdx=0000005dff34e988 rsi=0000000000000000 rdi=0000000000000000
rip=000007f982e340e0 rsp=fffff8800485a778 rbp=fffff8800485ab80
r8=fffffa800e623980 r9=0000000000000521 r10=fffffa800ec547a0
r11=0000000000000006 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl nz na pe nc
000007f9`82e340e0 ?? ???
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff80048661ef1 to fffff800484d0540
STACK_TEXT:
fffff880`0485a408 fffff800`48661ef1 : 00000000`000000fc 000007f9`82e340e0 79100001`0fdb1025 fffff880`0485a5e0 : nt!KeBugCheckEx
fffff880`0485a410 fffff800`48588980 : fffff880`0485a5e0 ffffd8e9`9e6056e2 fffffa80`0ec547a0 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x33f2d
fffff880`0485a450 fffff800`4850aabd : fffff880`0485a500 00000000`c0000016 fffffa80`0e603b00 fffffa80`0e623980 : nt! ?? ::FNODOBFM::`string'+0x33e85
fffff880`0485a4a0 fffff800`484cdfee : 00000000`00000008 00000000`00000000 00000000`00000000 fffff880`0485a5e0 : nt!MmAccessFault+0x3ed
fffff880`0485a5e0 000007f9`82e340e0 : fffff880`00dc5297 fffffa80`0ec54770 00000000`00000000 fffff8a0`011ce7c0 : nt!KiPageFault+0x16e
fffff880`0485a778 fffff880`00dc5297 : fffffa80`0ec54770 00000000`00000000 fffff8a0`011ce7c0 fffff980`00000000 : 0x000007f9`82e340e0
fffff880`0485a780 fffff880`00dc60d7 : 00000000`00000000 0000005d`ff34e988 00000000`00000000 00000000`00000000 : mqac!ACCreateQueue+0xa77
fffff880`0485a7f0 fffff800`488ab127 : fffffa80`0e5ed520 fffffa80`0d50ecf0 00000000`00000521 00000000`00000000 : mqac!ACDeviceControl+0x62b
fffff880`0485a890 fffff800`488c02f6 : 00000000`00000000 fffff8a0`00000080 00000000`00000000 00000000`00000000 : nt!IopXxxControlFile+0x7e5
fffff880`0485aa20 fffff800`484cf553 : 00000000`00000000 00000000`0000000c fffff6fb`7dbed078 fffff6fb`7da0ff30 : nt!NtDeviceIoControlFile+0x56
fffff880`0485aa90 000007f9`8a702c1a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
0000005d`ff34e928 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x000007f9`8a702c1a
STACK_COMMAND: kb
FOLLOWUP_IP:
mqac!ACCreateQueue+a77
fffff880`00dc5297 85c0 test eax,eax
SYMBOL_STACK_INDEX: 6
SYMBOL_NAME: mqac!ACCreateQueue+a77
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: mqac
IMAGE_NAME: mqac.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 5010abc2
IMAGE_VERSION: 6.2.9200.16384
BUCKET_ID_FUNC_OFFSET: a77
FAILURE_BUCKET_ID: 0xFC_mqac!ACCreateQueue
BUCKET_ID: 0xFC_mqac!ACCreateQueue
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0xfc_mqac!accreatequeue
FAILURE_ID_HASH: {d1daca31-6256-358c-65b5-69af54392880}
Followup: MachineOwner

Hi,
For BugCheck FC, it indicates that an attempt was made to execute non-executable memory. For more details,
please refer to following article.
Bug Check 0xFC: ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY
à
whenever we start the service as a User on the domain
. When we start the service as a system local it starts without problem
Did you mean that just use a standard domain user account to start the service, then encounter the issue? If
configure Log on as Local System account, will no BSOD issue occurred? Just a confirmation, thanks for your understanding.
Please check if you install all necessary Windows Updates on the server.
In addition, as you know, troubleshoot this kind of kernel crash issue, we need to analyze the crash dump file to narrow down the root cause of the issue. However, it is
not effective for us to debug the crash dump file here in the forum. If this issues is a state of emergency for you. Please contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
Hope this helps.
Best regards,
Justin Gu

Anyone had or having issues with getting nVidia NVS 450 resolution to work?

Hi all,
We got a new C20 with a nvidia NVS 450 card--and a ThinkVision monitor. The C20 had Windows 7 preinstalled; the out-of-the-box resolution was 640x480 and we couldn't get it to go higher than that! The ThinkVision and the video card are connected using the DisplayPort cable that came with the unit. After reinstalling the video card driver that came with the unit (on a CD that contains drivers for Windows and Linux), we could never get the resolution to go beyond 640x480. We gave up thinking it must be some quirk with Windows 7. We were going to install Linux on the C20 anyway, so we moved on doing that.
We installed Fedora 14 (64-bit) installed the nvidia video driver that was on the CD and can't get the display resolution greater than 640x480. After a few days of trial-n-error referencing various online forums, we managed to get the resolution up to 800x600, but not the expected 1900-something resolution the ThinkVision and the video card supports.
Has anyone had issues with getting the video card resolution to work? If so, were you able to resolve the problem? We thought we'd toss this here instead of calling up Lenovo support first because usually with technical issues, we get more intelligent replies than over-the-phone. Also, waiting for replies on a forum is less frustrating than being put on hold over the phone.
Chris
Solved!
Go to Solution.

Thank you for your reply.
I was lucky to get a hold of another monitor and when I connected that, I got the full resolution. After much testing, I determined that it was a faulty monitor and it had nothing to do with the video card. I eventually got a replacement monitor for the one that wasn't giving me the full resolution.
Afterwards, I went ahead and got the latest nvidia drivers from their Web site. Everything works really well now.

When trying to update my IPad apps I am getting the message "Your Apple ID has been disabled". Still have more than 50$ in my account, so what does this mean ? What can I do to get my ID enabled again ?

when I am trying to download IPad updates I get the message "Your Apple ID has been disabled". What does this mean? How do I get my ID enabled again? Still got more than 50$ in my account !

Reset your Apple ID password here > Apple - My Apple ID
More information here > Apple ID: "This Apple ID has been disabled for security reasons" appears

CUDA enabled driver for Nvidia NVS 140M

Hi,
I want to do some GPU coding on my T61 with Nvidia NVS 140M GPU using the "new" CUDA system. The NVS 140M supports CUDA but the current official driver from Levono (ForceWare 176.93) seems to be lacking CUDA support. When I download the recommended driver for the latest CUDA (2.1) from the Nvidia CUDA site (ForceWare 180.22) it's not installable unless I use the Nvidia Mobility Modder to force the driver to install. Then CUDA programs run fine but the system is kind of unstable. Resuming from stand by or hibernation works only sometimes, mostly screen starts flickering and then BIOS screen appears. So it's not really usable for a laptop computer. Further, ForceWare 176.93 should be able to support CUDA, since CUDA 1.1 is supported from 173.xx on, as this is the recommended driver provided for download.
Does anyone have an idea? It cannot be that I have suitable hardware but cannot use it properly due to some crappy driver policy.
This all relates to Vista x64, with linux there was until now no problem with the latest nvidia driver and resuming.
Cheers
Phil
Message Edited by phil12345678 on 03-12-2009 04:35 AM

Try the notebook driver for developer here. It worked for me.
http://developer.nvidia.com/object/cuda_3_0_downloads.html

BSOD when installing Windows XP

I have two R500 ThinkPads that came with Vista Home Basic sp1. I need to install Windows XP Pro sp2 on the laptops but I keep getting a BSOD when I boot from the XP installation cd. The BSOD error is:
A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:
Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
Technical information:
*** STOP: 0x0000007B (0xF7C04524, 0xC0000034, 0x00000000, 0x00000000)
The laptops are both brand new, I did make recovery disks of the vista install, but I really need XP installed on them to work with our system. Any help would be greatly appreciated.

There's a slightly easier way than slipstreaming.
The issue is that XP doesn't have driver support for the SATA AHCI controller on that system. However, you can download that driver here: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70477
You'll need to extract that and put it in the root of a floppy (yeah, a floppy... looking for the A: drive is hardcoded in to the XP install).
When you boot to the XP CD, press F6 when prompted (it'll say "Press F6 to install third-party SCSI controller" or something similar along the bottom).
Windows will load some files and eventually bring you to a screen with a couple of options. It'll tell you your current controller is "<none>" and allow you to press S to specify a driver. Once you do, it'll scan the A drive and load up the entries from the txtsetup.oem file you extracted from the driver.
The selection you want doesn't show up by default. There aren't any scroll bars, but you can scroll through the list using the arrow keys. You want "Intel(R) ICH9M-E/M SATA AHCI Controller" which is the 7th from the bottom.
Select that, Windows will load it, the install will continue and you'll be golden.
If you don't want to bother with scrolling, you can open the txtsetup.oem file and find this line (near the top):
[Defaults]
scsi = iaStor_ICH8MEICH9ME
Change that to:
[Defaults]
scsi = iaAHCI_ICH9MEM
And the proper controller will be highlighted by default so you don't have to arrow through the list.
If all of that is too much of a pain, you can go in to the BIOS under Config->SATA and change AHCI to Compatibility and load Windows w/o the IMSM driver. Once Windows is loaded, you can install the driver and enable AHCI mode using the install.cmd file in the PREPARE directory of the driver linked above.
Hope this helps.
Full disclosure: Lenovo issues my paychecks.

T420s-NVIDIA NVS 4200m shows up as Standard VGA

Hey all,
So I've had this problem for a while now, I know that in my T420s there is a NVIDIA NVS 4200m GPU, but it refuses to recognize that it even exists. I'm running it in NVIDIA Optimus mode, but in Device Manager, all that shows up under the Display Driver are Intel(R) HD Graphics and another which says Standard VGA Graphics adapter (which can't start due to a 'Code 10')
Why is it that my NVIDIA doesn't show up? How can I get my T420s to recognize and use it over the Intel HD?
Any help you can give me is greatly appreciated. Thank you!

I got my new T420s today with nVidia NVS 4200M and after turning it on, it just showed standard video with 1024x768.
In device manager it showed both standard VGA graphics and NVIDIA NVS 4200M but when I right clicked on the desktop it did not give me an option to choose nVidia, but just standard VGA.
I updated the nVidia graphics driver from here (7 Nov 2011, the one from April 2011 was not enough)
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014142
I installed, restarted and nVidia showed up with all display options
Problems resolved!

HP dv6 Notebook freezes or get BSOD from AMD High-Definition Driver

My laptop (with switchable graphics) started to randomly get BSODs and I tried to fix this problem by restoring my notebook to its factory settings. Despite this, I still received quick BSODs before my computer shut down or froze, and i have reset my notebook several times.
I am nearly certain that it is my graphics driver. Every time I run the CCC and run programs under "High Performace" my computer proceeds to crash. Likewise, if I attempt to run a game my screen freezes.
When I disable the AMD driver in Device Manager my computer works fine (except games won't run and certain aesthetic things like resolution are changed). Also, when the driver is enabled and I boot my laptop, the laptop will freeze or get a quick BSOD at the boot screen ("Starting Windows"). I have to shut down and turn my computer back on repeatedly and then occasionally the computer will manage to boot up again.
I have a HP dv6-6170us with AMD Radeon 6770M, and my operating system is Windows 7 (64-bit).
I greatly need help with this situation and have tried to uninstall the driver and reinstall it again off HP's website just to have it still not work again.
Thanks!

Hello mr_edgeworth.
I understand you believe a graphics issue is causing your computer to freeze or produce a BSOD. I will do my best to assist you!
First, we need to determine if the issue is hardware or software-based. Please follow the steps in this document: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01896793
Please respond when you complete the troubleshooting. I'm only here to help!
Mario
I worked on behalf of HP.

Cannot install intel widi software on T530 - i7-3520M, NVS 5400M & HD 4000, Intel N6300

Hi, I recently bought a T530, when I placed the order, I contacted Lenovo support that my machine supports widi.
Here is the spec:
CPU: i7-3520M
Video card: NVS 5400m And HD Graphics 4000
Network: Intel Ultimate 6300N
My machine comes with Win 8 on 500G HDD, I replaced the HDD with 256G SSD and installed win7 on the SSD.
I downloaded widi software fron Lenovo site (actually tried the one on Intel as well, same result), I got this message:
The platform is not compatible with Intel WiDi or the application is in use, please see log for more details"
I checked the log, here it is:
08:03:51:918,[t:0xc80] : Log Server started by C:\Users\beyond\AppData\Local\Temp\sefB0A1.tmp\WiDiBootLoader.exe [L=6][M=LogServer][F=LogServer.cpp: 121]
08:03:51:919,[t:0xc80] : PDL VERSION_STRING = 3.5.40.0 [L=7][M=BootLoader][F=PlatformReport.cpp: 207]
08:03:51:919,[t:0xc80] : PDL WIDI_COMPANY_NAME = Intel Corporation [L=7][M=BootLoader][F=PlatformReport.cpp: 208]
08:03:51:919,[t:0xc80] : PDL WIDI_COPYRIGHT_STRING = Copyright © 2012-2012, Intel Corporation. All rights reserved. [L=7][M=BootLoader][F=PlatformReport.cpp: 209]
08:03:51:919,[t:0xc80] : HKEY_0x80000001\Software\Intel Corporation\Intel WiDi\ [L=7][M=BootLoader][F=PlatformReport.cpp: 44]
08:03:51:919,[t:0xc80] : HKEY_0x80000001\Software\Intel Corporation\Intel WiDi\PDL\ [L=7][M=BootLoader][F=PlatformReport.cpp: 44]
08:03:51:920,[t:0xc80] : HKEY_0x80000001\Software\Intel Corporation\Intel WiDi\PDL\PlatformComponents = 0x7bf [L=7][M=BootLoader][F=PlatformReport.cpp: 80]
08:03:51:920,[t:0xc80] : HKEY_0x80000001\Software\Intel Corporation\Intel WiDi\PDL\PlatformCompatable = 0x0 [L=7][M=BootLoader][F=PlatformReport.cpp: 80]
08:03:51:920,[t:0xc80] : HKEY_0x80000001\Software\Intel Corporation\Intel WiDi\LogEnable = 0x1 [L=7][M=BootLoader][F=PlatformReport.cpp: 80]
08:03:51:920,[t:0xc80] : HKEY_0x80000001\Software\Intel Corporation\Intel WiDi\LogServer = WiDiBootLoader.exe [L=7][M=BootLoader][F=PlatformReport.cpp: 80]
08:03:51:920,[t:0xc80] : Could not open HKEY_0x80000002\SOFTWARE\Intel Corporation\Intel WiDi [L=7][M=BootLoader][F=PlatformReport.cpp: 88]
08:03:51:920,[t:0xc80] : Launching Utilsexe [L=6][M=BootLoader][F=WiDiCustom.cpp: 82]
08:03:52:027,[t:0x1100] : >>[CheckIfPlatformCompatible()] [L=6][M=CleanUp][F=pdl.cpp: 301]
08:03:52:027,[t:0x1100] : >>[GetProduct] [L=7][M=CleanUp][F=pdl.cpp: 230]
08:03:52:027,[t:0x1100] : >>[GetPlatform] [L=7][M=CleanUp][F=pdl.cpp: 201]
08:03:53:109,[t:0x1100] : processor name: Intel64 Family 6 Model 58 Stepping 9 [L=6][M=CleanUp][F=pdl.cpp: 214]
08:03:53:109,[t:0x1100] : Chief River System [L=6][M=CleanUp][F=pdl.cpp: 135]
08:03:53:109,[t:0x1100] : <<[GetPlatform] [L=7][M=CleanUp][F=pdl.cpp: 201]
08:03:53:110,[t:0x1100] : PRODUCT_TYPE: NOTEBOOK [L=6][M=CleanUp][F=pdl.cpp: 245]
08:03:53:110,[t:0x1100] : <<[GetProduct] [L=7][M=CleanUp][F=pdl.cpp: 230]
08:03:54:193,[t:0x1100] : CLASS_TYPE_PROCESSOR: Caption: Intel64 Family 6 Model 58 Stepping 9 [L=6][M=CleanUp][F=pdl.cpp: 328]
08:03:54:193,[t:0x1100] : CLASS_TYPE_PROCESSOR: Family: 6 [L=6][M=CleanUp][F=pdl.cpp: 329]
08:03:54:193,[t:0x1100] : CLASS_TYPE_PROCESSOR: Model: 58 [L=6][M=CleanUp][F=pdl.cpp: 337]
08:03:54:193,[t:0x1100] : Chief River System [L=6][M=CleanUp][F=pdl.cpp: 135]
08:03:54:193,[t:0x1100] : CLASS_TYPE_PROCESSOR: Name: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz [L=6][M=CleanUp][F=pdl.cpp: 349]
08:03:54:193,[t:0x1100] : CLASS_TYPE_PROCESSOR: Manufacturer: GenuineIntel [L=6][M=CleanUp][F=pdl.cpp: 357]
08:03:54:193,[t:0x1100] : CLASS_TYPE_PROCESSOR: Status: OK [L=6][M=CleanUp][F=pdl.cpp: 371]
08:03:54:193,[t:0x1100] : CLASS_TYPE_PROCESSOR: Gaming mode compatable: 1 [L=6][M=CleanUp][F=pdl.cpp: 394]
08:03:54:193,[t:0x1100] : CLASS_TYPE_PROCESSOR: ProcessorType: 3 [L=6][M=CleanUp][F=pdl.cpp: 397]
08:03:54:193,[t:0x1100] : CLASS_TYPE_PROCESSOR: StatusInfo: 3 [L=6][M=CleanUp][F=pdl.cpp: 405]
08:03:54:193,[t:0x1100] : CLASS_TYPE_PROCESSOR: Architecture: 9 [L=6][M=CleanUp][F=pdl.cpp: 413]
08:03:54:193,[t:0x1100] : CLASS_TYPE_PROCESSOR: CurrentClockSpeed: 1189 [L=6][M=CleanUp][F=pdl.cpp: 422]
08:03:54:193,[t:0x1100] : CLASS_TYPE_PROCESSOR: ProcessorData.CurrentClockSpeed: N/A [L=6][M=CleanUp][F=pdl.cpp: 429]
08:03:54:193,[t:0x1100] : CLASS_TYPE_PROCESSOR: *** WiDi COMPATABLE [L=6][M=CleanUp][F=pdl.cpp: 435]
08:03:54:193,[t:0x1100] : CLASS_TYPE_VIDEOCONTROLLER: DeviceString: Intel(R) HD Graphics 4000 [L=6][M=CleanUp][F=pdl.cpp: 452]
08:03:54:193,[t:0x1100] : CLASS_TYPE_VIDEOCONTROLLER: DeviceName: \\.\DISPLAY2 [L=6][M=CleanUp][F=pdl.cpp: 458]
08:03:54:193,[t:0x1100] : CLASS_TYPE_VIDEOCONTROLLER: DeviceID: PCI\VEN_8086&DEV_0166&SUBSYS_21F517AA&REV_09 [L=6][M=CleanUp][F=pdl.cpp: 459]
08:03:54:193,[t:0x1100] : CLASS_TYPE_VIDEOCONTROLLER: DeviceKey: \Registry\Machine\System\CurrentControlSet\Control\Video\{D52F3C45-6430-427E-B060-F308EB11663D}\0001 [L=6][M=CleanUp][F=pdl.cpp: 460]
08:03:54:193,[t:0x1100] : CLASS_TYPE_VIDEOCONTROLLER: StateFlags: 134217728 [L=6][M=CleanUp][F=pdl.cpp: 461]
08:03:54:193,[t:0x1100] : CLASS_TYPE_VIDEOCONTROLLER: cb: 840 [L=6][M=CleanUp][F=pdl.cpp: 462]
08:03:54:193,[t:0x1100] : CLASS_TYPE_VIDEOCONTROLLER: *** WiDi COMPATABLE [L=6][M=CleanUp][F=pdl.cpp: 467]
08:03:54:193,[t:0x1100] : >>[GetMediaSDKVersion()] [L=6][M=CleanUp][F=pdl.cpp: 1051]
08:03:54:263,[t:0x1100] : Media SDK Initialized - Version 1.3 (MSDK 2012) [L=6][M=CleanUp][F=pdl.cpp: 1072]
08:03:54:263,[t:0x1100] : MSDK Session->Close() start [L=7][M=CleanUp][F=pdl.cpp: 1093]
08:03:54:267,[t:0x1100] : MSDK Session->Close() completed [L=7][M=CleanUp][F=pdl.cpp: 1095]
08:03:54:267,[t:0x1100] : <<[GetMediaSDKVersion()] [L=6][M=CleanUp][F=pdl.cpp: 1051]
08:03:54:267,[t:0x1100] : CLASS_TYPE_VIDEOCONTROLLER_EXT: Media SDK Version: 1.3 [L=6][M=CleanUp][F=pdl.cpp: 483]
08:03:54:267,[t:0x1100] : CLASS_TYPE_VIDEOCONTROLLER_EXT_MSDK: *** WiDi COMPATABLE [L=6][M=CleanUp][F=pdl.cpp: 490]
08:03:54:267,[t:0x1100] : >>[DDE_Enabled()] [L=6][M=CleanUp][F=pdl.cpp: 851]
08:03:54:270,[t:0x1100] : DDE_Enabled - Loaded igddexx.dll [L=6][M=CleanUp][F=pdl.cpp: 876]
08:03:54:273,[t:0x1100] : InitDDECommunications with DDE interface version 3 [L=6][M=CleanUp][F=pdl.cpp: 979]
08:03:54:276,[t:0x1100] : InitDDECommunications with DDE interface version 3 succeeded! [L=6][M=CleanUp][F=pdl.cpp: 986]
08:03:54:383,[t:0x1100] : <<[DDE_Enabled()] [L=6][M=CleanUp][F=pdl.cpp: 851]
08:03:54:383,[t:0x1100] : CLASS_TYPE_VIDEOCONTROLLER_EXT_DDE: *** WiDi COMPATABLE [L=6][M=CleanUp][F=pdl.cpp: 507]
08:03:54:383,[t:0x1100] : CLASS_TYPE_VIDEOCONTROLLER_EXT_GFX_COMPATABLE: *** WiDi COMPATABLE [L=6][M=CleanUp][F=pdl.cpp: 526]
08:03:54:384,[t:0x1100] : CLASS_TYPE_WIRELESSNIC: Number of WLAN interfaces = 1 [L=6][M=CleanUp][F=pdl.cpp: 551]
08:03:54:384,[t:0x1100] : CLASS_TYPE_WIRELESSNIC: WLAN Interface Name[0] = Intel(R) Centrino(R) Ultimate-N 6300 AGN [L=6][M=CleanUp][F=pdl.cpp: 555]
08:03:54:384,[t:0x1100] : CLASS_TYPE_WIRELESSNIC: *** WiDi COMPATABLE [L=6][M=CleanUp][F=pdl.cpp: 582]
08:03:54:384,[t:0x1100] : GetWiFiDriverVersion - LoadLibrary(_T("PanWFDApi.dll")) failed! [L=3][M=CleanUp][F=pdl.cpp: 1189]
08:03:54:384,[t:0x1100] : GetLastError returned : 126 (no further informatio) [L=6][M=CleanUp][F=pdl.cpp: 1190]
08:03:54:384,[t:0x1100] : GetWiFiDriverVersion - LoadLibrary(_T("PanApi.dll")) failed! [L=3][M=CleanUp][F=pdl.cpp: 1218]
08:03:54:384,[t:0x1100] : GetLastError returned : 126 (no further informatio) [L=6][M=CleanUp][F=pdl.cpp: 1219]
08:03:54:384,[t:0x1100] : CLASS_TYPE_WIRELESSNIC_EXT: WIRELESS_DRIVER_COMPATABLE: FAIL [L=6][M=CleanUp][F=pdl.cpp: 609]
08:03:54:399,[t:0x1100] : CLASS_TYPE_OS: Version: 6.1.7600, parsed: 6, 1, 7600, compared with: 6, 1, 7600 [L=6][M=CleanUp][F=pdl.cpp: 625]
08:03:54:399,[t:0x1100] : CLASS_TYPE_OS: Caption: Microsoft Windows 7 Ultimate [L=6][M=CleanUp][F=pdl.cpp: 635]
08:03:54:399,[t:0x1100] : CLASS_TYPE_OS: Manufacturer: Microsoft Corporation [L=6][M=CleanUp][F=pdl.cpp: 638]
08:03:54:399,[t:0x1100] : CLASS_TYPE_OS: OSArchitecture: 64-bit [L=6][M=CleanUp][F=pdl.cpp: 646]
08:03:54:399,[t:0x1100] : CLASS_TYPE_OS: *** WiDi COMPATABLE [L=6][M=CleanUp][F=pdl.cpp: 653]
08:03:54:404,[t:0x1100] : CLASS_TYPE_SOUNDDEVICE: ConfigManagerErrorCode: 0 [L=6][M=CleanUp][F=pdl.cpp: 668]
08:03:54:404,[t:0x1100] : CLASS_TYPE_SOUNDDEVICE: Name: High Definition Audio Device [L=6][M=CleanUp][F=pdl.cpp: 670]
08:03:54:404,[t:0x1100] : CLASS_TYPE_SOUNDDEVICE: N/A [L=6][M=CleanUp][F=pdl.cpp: 681]
08:03:54:404,[t:0x1100] : CLASS_TYPE_RAM: Capacity: 16466732 [L=6][M=CleanUp][F=pdl.cpp: 695]
08:03:54:404,[t:0x1100] : CLASS_TYPE_RAM: N/A [L=6][M=CleanUp][F=pdl.cpp: 705]
08:03:54:404,[t:0x1100] : WiDi COMPATABLE: 1 - Processor [L=6][M=CleanUp][F=pdl.cpp: 712]
08:03:54:404,[t:0x1100] : WiDi COMPATABLE: 1 - VideoController [L=6][M=CleanUp][F=pdl.cpp: 713]
08:03:54:404,[t:0x1100] : WiDi COMPATABLE: 1 - GFX Compatable [L=6][M=CleanUp][F=pdl.cpp: 714]
08:03:54:404,[t:0x1100] : WiDi COMPATABLE: 1 - WirelessNIC [L=6][M=CleanUp][F=pdl.cpp: 715]
08:03:54:404,[t:0x1100] : WiDi COMPATABLE: 0 - WirelessDriver [L=6][M=CleanUp][F=pdl.cpp: 716]
08:03:54:404,[t:0x1100] : WiDi COMPATABLE: 1 - OS [L=6][M=CleanUp][F=pdl.cpp: 717]
08:03:54:404,[t:0x1100] : DEVICE PRESENT: 1 - SoundDevice [L=6][M=CleanUp][F=pdl.cpp: 718]
08:03:54:404,[t:0x1100] : DEVICE PRESENT: 1 - RAM [L=6][M=CleanUp][F=pdl.cpp: 719]
08:03:54:404,[t:0x1100] : DEVICE PRESENT: 1 - MediaSDK [L=6][M=CleanUp][F=pdl.cpp: 720]
08:03:54:404,[t:0x1100] : DEVICE PRESENT: 1 - DDE GFX [L=6][M=CleanUp][F=pdl.cpp: 721]
08:03:54:404,[t:0x1100] : DEVICE PRESENT: 0 - VAD Drivers [L=6][M=CleanUp][F=pdl.cpp: 730]
08:03:54:404,[t:0x1100] : DEVICE PRESENT: 0 - USBoIP Drivers [L=6][M=CleanUp][F=pdl.cpp: 735]
08:03:54:404,[t:0x1100] : WiDi Supported ==== 0 [L=6][M=CleanUp][F=pdl.cpp: 781]
08:03:54:404,[t:0x1100] : <<[CheckIfPlatformCompatible()] [L=6][M=CleanUp][F=pdl.cpp: 301]
08:03:54:408,[t:0xc80] : PlatformCompatable = 0 [L=6][M=BootLoader][F=main.cpp: 110]
08:03:54:973,[t:0xec4] : >>[GetPlatform] [L=7][M=utils][F=pdl.cpp: 201]
08:03:56:013,[t:0xec4] : processor name: Intel64 Family 6 Model 58 Stepping 9 [L=6][M=utils][F=pdl.cpp: 214]
08:03:56:013,[t:0xec4] : Chief River System [L=6][M=utils][F=pdl.cpp: 135]
08:03:56:014,[t:0xec4] : <<[GetPlatform] [L=7][M=utils][F=pdl.cpp: 201]
08:03:56:071,[t:0xec4] : CLASS_TYPE_OS: Version: 6.1.7600 [L=6][M=utils][F=pdl.cpp: 803]
08:03:56:071,[t:0xec4] : Windows Version: 7 [L=6][M=utils][F=pdl.cpp: 812]
08:05:31:133,[t:0xc80] : Log Server stopped by C:\Users\beyond\AppData\Local\Temp\sefB0A1.tmp\WiDiBootLoader.exe [L=6][M=LogServer][F=LogServer.cpp: 121]
So, how can I get it working?

I'm not quite sure if this will work for you, but when I bought a NetGear PTV3000 Wireless Display Adapter, I could not get the Intel WiDi software to connect to the NetGear.
I found that the problem was with the Intel PROSet/Wireless WiFi software. When you install the PROSet driver, you *MUST* install the "Intel My WiFi Technology" or else the Intel WiDi drivers will not find the WiDi displays.
See the following post on the Intel forums: http://communities.intel.com/thread/31556
I hope this helps.

T430 gets BSOD when enabling NVidia NVS 5400M.

Similar Messages

Maybe you are looking for