T430 NVidia GPU not listed in device manager

Hello -- I have a problem regarding the NVidia NVS 5400M inside the Thinkpad T430. I use Windows 8. I'm not exactly sure how it happened, but the NVidia card no longer shows up in Device Manager and the NVidia driver (both the standard driver from their website AND Lenovo's Optimus driver) refuses to install, complaining it can't find any compatible hardware. Device Manager does not list any graphics cards or unknown devices, and as far as Windows is concerned the NVidia card does not exist.
Here's a summary of what I see:
In Discrete Graphics mode -- my Linux installation (which uses native NVidia drivers) works fine and uses the NVidia card. Windows 8 boots and runs with a generic graphics driver; there is a performance hit, and no graphics cards or unknown devices are listed in Device Manager. That's the problem I want to fix.
In Optimus mode -- Windows 8 boots and runs with the Intel integrated graphics (Intel HD Graphics 4000) which is listed in Device Manager. Again, no other graphics cards or unknown devices are listed.
I appreciate in advance any help towards getting the NVidia drivers installed successfully!
Solved!
Go to Solution.

nsrathjen wrote:
Yep, still doesn't appear that the NVidia drivers from that package are installing. If I boot in Optimus mode, only the Intel card is shown in Device Manager. I'd like to not have to use Optimus and just stay in Discrete Graphics mode if possible because Linux support for Optimus is not very good.
Would completely uninstalling all the drivers possibly help?
Before you go through that hassle, try the following:
1. Go into the BIOS Configuration Display setting and change it to Discrete only.  If you see a setting just below display that talks about OS detection, disable that as well otherwise it will try to flip back to Optimus.  F10 to save and exit.
2. Go back into the BIOS settings and verify the setting was really saved.  Exit the BIOS settings (discarding this time) and boot Windows normally.
3. Go to C:\DRIVERS\WIN\VIDEO\NVIDIA and run setup.exe.  Use the Custom option for the mode after it does compat checks and asks for you to agree to the EULA.
4. When you see the list of custom installation options, turn on the "Perform a clean installation" checkbox.  This should not present a problem if you don't have custom profiles.
See if that works.

Similar Messages

  • G500 - Bluetooth not listed in device manager

    Hi,
    Bluetooth is not listed under device manager
    it doesn't appear in pc settings/pc and devices neither does the bluetooth switch appears une aiplane mode
    my model;
    product: 20236
    serial: xxxxx
    thx
    Moderator comment: Serial number(s) removed to protect member from mischief.

    Hi guys,
    I see that Shiv_K is helping you out on this
    In addition. 
    Try to refresh the Hardware and Power.
        Remove AC and Battery
              Hold the Power Button down for at least 15 sec. Then Reconnect Everything back
    Turn on the Systen and Right away start hitting F2 to load the BIOS Utility
              Inside BIOS hit F9 then Enter for Yes to load defaults
              Hit F10 to Save and Exit then Enter for YES.
    now open
        Control Panel / Programs, and uninstall Lenovo Energy Management and restart the system
    Then install these
    Lenovo Energy Management
    Intel Wifi Driver
     Press Fn+F5 and see if you will be provided with this window showing the bluetooth..
    Spoiler (Highlight to read)
     Hope this helps,
    Cheers
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • G470 Bluetooth not listed under Device Manager and not working

    Hi,
    Can someone teach me how to solve my G470 problem?
    Its Bluetooth is not listed under Device Manager and I can't find it anywhere.
    Before that, it isn't working at all.
    Thanks
    Solved!
    Go to Solution.

    hi athirah11,
    Welcome to the Lenovo Forums.
    Can you try the following:
    1. Press the Windows key‌ +R, type devmgmt.msc and press Enter. On the Device Manager, click View > Show hidden devices and check if the Bluetooth device is being listed.
    - Link to picture
    - Link to picture
    2. If the bluetooth device shows up under the Device Manager, do the following:
        a. Under Control Panel > Programs, uninstall the Bluetooth driver/software (reboot if necessary)
        b. Run the Bluetooth Driver Installer
         -  this will identify the type of Bluetooth Device installed on the system (eg. Qualcom Atheros, Intel, etc.) and it will install a generic Bluetooth driver. If successful, the Bluetooth device and its components should now appear normally under the Device Manager.
    If the bluetooth device still doesn't show up, can you provide the model number of your G470 (eg. 59xxxxxx) fur further checking.
    Let me know how it goes.
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Im unable to find in Apple Mobile Device USB Driver is not listed in device manager

    i tried all option like uninstall my itunes and get latest and reinstall and factory reset my iphone5
    but still my iphone is not reconzie under device manger , im unable find Apple Mobile Device USB Driver is not listed under device manger onmy windows7

    Found a possible solution for me.
    While the phone was plugged into my computer and iTunes is CLOSED.
    1. I went to Services in Windows.
    2. I selected Apple Mobile Device and right clicked and selected "Stop".
    3. Then I right-clicked again and selected "Start".
    4. Then I went to Device Manager and right clicked my iPhone with the yellow alert icon and selected "Uninstall".  You will get a warning about uninstalling the device.  Click OK.
    5.  At the top of Device Manager I clicked the Action menu and selected "Scan for Hardware Changes".
    This re-installed the iPhone and everything started working again.

  • T430s Nvidia GPU not being utilized

    I noticed that when looking at my nvidia gpu tray icon, it is almost never being used.
    On a T410s I had a while back, I had the ability to choose to turn it on and off based on power schemes.  
    1) Is there any value to keep my discrete GPU on and have it run all visual events?
    2) If yes, how can I do this?
    i7-3520; 16GB Ram; msata - 256 gb

    You should also be able to right-click and there should be a "run with graphics processor" option that will allow you to select the nVidia card.
    When asking for help, post your question in the forum. Remember to include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help others with the same question in the future.
    My TPs: Twist 2HU: i5-3317U Win 8 Pro, 4GB RAM 250GB Samsung 840 | T420 4177CTO: i5-2520M, HD+, Win 7 Pro x64, 8GB RAM, Optimus, 160GB Intel 320 SSD, Intel 6300 WiFi, BT 3.0 | T400 2764CTO: P8700, WXGA, Win 7 Ult x64, AMD 3470, 8GB RAM, 64GB Samsung SSD, BT, Intel 5300 WiFi | A20m 14.1" PIII 500 (retired). Monitors: 2x Dell U2211h IPS 100% sRGB calibrated w/ Spyder3.

  • X200s WiFi network Card is not shown in Device Manager

    Hello,
    I have a X200s laptop. WinXp is installed on it.
    The problem is that the WiFi network card is not listed  in device manager under network cards. And the Wifi led is always off. Only bluetooth and Wireless wan leds are on.
    Can anyone help me, I need to let the XP detevt the WIFI adapter.
    Thank you.

    i have the same problem. Can you tell what to do

  • My hp pavilion dv6-6c13cl entertainment notebook pc - webcam not found in device manager.

    I am a technician working on this unit for a neighbor, and it is having some issues. She has kept this unit in very good condition, never been dropped and has functioned very well. Recently she went to use voice chat on facebook as she has several times in the past and it told her it couldn't find a webcam. I tried the youcam software and it also said no webcam detected. I have tried to update devices, run all updates from HP, pulled the battery and power cord and held power button for 10 seconds and hooked it back up, reformatted and reinstalled fresh....nothing seems to work, do you have any other solutions? I see it is under warrantly so I'm not going to take it apart and make physical repairs as I do not wish to void her warranty.

    Hi geraldnpatty,
    Take a look at this document, which provides troubleshooting steps for the webcam not being listed in Device Manager.  Hopefully, this will take care of the issue.  If not and it's still in warranty, I'd suggest calling in.
    Please let me know if this helps. 
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Hp pavillion dv9502au notebook pc broadcom wireless adpater not shown in device manager

    Problem: hp pavillion dv9502au notebook pc broadcom wireless adpater not shown in device manager
    System Type
    hp pavillion dv9502au notebook pc
    Windows editon
    Windows 7 Ultimate
    System
    Processor                 AMD Turion(tm) 64 X2 Moblie Technology TL-56 1.80GHz
    Installed Memory    1.00 GB (895 MB usable)
    System type              32-bit Operating System
    Wirless TECH
    Broadcom Wireless
    Problem
    1. I have a switch at front left of laptop which can be slided to switch on Wireless Connections
    2. IT turns red when switched off and blue when switched on as normal
    3. But only thing that turns up is Bluetooth connection and no broadcom wireless connection
    4. No adapter is shown in the devmgmt.msc( device manager)
    5. I tried installing broadcom drivers to reslove the problem, and restarted many times for install.
    6. I tried the "reset thing" after removing the battery that experts said about.
    7. I was atlast forced to use Wired conneciton using ethernet( i hate it because, i can't be mobile around the house)
    8. Please Help
    Windows 7 Ultimate
    System
    Processor        AMD Turion(tm) 64 X2 Moblie Technology TL-56 1.80GHz
    Installed Memory    1.00 GB (895 MB usable)
    System type        32-bit Operating System
    Wirless TECH
    Broadcom Wireless
    Problem
    1. I have a switch at front left of laptop which can be slided to switch on Wireless Connections
    2. IT turns red when switched off and blue when switched on as normal
    3. But only thing that turns up is Bluetooth connection and no broadcom wireless connection
    4. No adapter is shown in the devmgmt.msc( device manager) (network adpaters shown are
                                         NVIDIA geforce adapter, bluetooth adpaters)
    5. I tried  installing many  broadcom drivers to reslove the problem, and restarted many times for install.
    6. I tried the "reset thing" after removing the battery that experts said about.
    7. I was atlast forced to use Wired conneciton using ethernet( i hate it because, i can't be mobile around the house)
    Please help

    Your wireless adapter is defective.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • FF not running (not listed in Task Manager) but get message it is (and Profile missing)?

    WIN7 (86). Can't open FF. Get message it's running, but it isn't (not listed in Task Manager showing all processes). Tried to access my Profile, but search was unsuccessful.

    Try to delete the profiles.ini file to force Firefox to create a new default profile.
    *http://kb.mozillazine.org/profiles.ini_file
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    See also:
    *https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • My dvd drive not recognized in device manager,ge​tting the yellow explanatio​n mark.

    my dvd drive not recognized in device manager,getting the yellow explanation mark. Tried uninstallingdevice drive and scanning for new hardware. scanned for updates, etc. I getting no results. The laptop is a Pavilion DV5. Thanks 

    Hi,
    It could be that the drive has a Hardware issue, but try the following.
    From the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'.  In to the prompt type the following command and hit enter.
    sfc /scannow                 ( note that there is a space between sfc and the / )
    Let the process complete, then type exit and hit enter.  
    Next, open Device Manager, right click the DVD drive and select Uninstall.  When this has completed, restart the notebook and let Windows rediscover the device and check.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Ipad not listed in devices, ipad not listed in devices

    ipad 2 is not listed under devices in itunes. Have tried everything listed on apple help list & it stiil does not list my ipad2 under devices. Ipad makes a ping noise when i connect it to my laptop. Any suggestions?

    Windows
    http://support.apple.com/kb/TS1538

  • Apple Mobile Device USB Driver is listed in device manager, but has a yellow  "!".  I try reinstall,disable,enable the drivers but the problem persist. Could you help me ?

    Hi
    I connect my ipad to my pc (Windows xp SP3) and I can see my ipad and photos in my computer. When I install the itunes 11 , after installation , I can't connect the ipad again or any other apple device. The Apple Mobile Device USB Driver is listed in device manager, but has a yellow  "!".
    I have try to reinstall the drivers from c:\progamfiles\common files\apple\... but the problem persist. Could you help anyone about this ?

    You need to completely uninstall iTunes from your computer and then download and install it again.
    You do know that Microsoft has a web site, right?

  • Let's Be Honest / Save Time: Lenovo T430s (NVIDIA) DOES NOT Support Multiple Monitors

    There have been a few comments / complaints / articles around the web regarding the T430s and difficulties using multiple monitors.
    But since this capabilitiy is clearly documented in all of Lenovo's specifications and marketing literature, I went ahead and bought an i7, NVIDIA, SSD, T430s with the docking station and all the bells and whistles to facilitate 3 or even 4 monitors.
    Well please listen and let's be clear:  IT DOES NOT WORK. Therefore, to be clear:
    DO NOT BUY THIS MACHINE AND DOCK IF YOU WANT IT TO LIVE UP TO ITS MULTI MONITOR PROMISE.
    In the two weeks since FedEx arrived, here is the deal:
    1) I fussed around with the dock and monitors at home and the office to no avail, for most of TWO weekends.  (I am not a beginner).
    2) Then, I spoke to Lenovo in Atlanta's tech support for THREE HOURS.  No results
    3) I spoke to Lenovo's "premium support" (paid) for FOUR HOURS.  No results.
    4) I consulted with a 3rd party expert on mulitple monitors who was kind enough to remote into my machine for another HOUR.  No results.
    5) Muliple parties have confirmed that yes, all hardware is working and yes, everything can be seen in device manager, and yes, the NVIDA card is properly switched on in the BIOS, yes I bought the i7 version etc.
    6) And just in case, yes, we wiped the drive clean for a factory reset, yes we unistalled and reinstalled all the drivers and yes, we even deleted the Lenovo driver just in case the NVIDIA driver was newer or better and yes, we double checked the settings in the BIOS again.
    7) Yes, we tried every connector in the dock AND the laptop:  VGA, DVI, DP and mini DP - in EVERY possible combination.
    And NO, IT STILL DOESN'T WORK. AT ALL.  Two screens, take your pick, but THAT'S IT.
    Finally, not one but TWO technicians asked me to not quote them (so I wont mention any names) but that in their opinion IT JUST DOESNT WORK AT ALL, EVER, despite Lenovo's claims / insistance that it is configured for 3 and even 4 monitors.
    So the final conclusion was only that Lenovo must have rushed this T430 spec / configuration / capability to market (including the glossy brochures!) before figuring out that something is missing in the handshake between the mother board and the NVIDIA card? 
    Or in the firmware re swithing between the Intel (internal) and NVIDA card? 
    Or something else which prevents the NVIDIA card from seeing the ports on the laptop or the dock?
    In summary 1) you get NOTHING from the NVIDIA upgrade and with respect to more than 2 monitors, IT JUST DOES NOT WORK, AT ALL, EVER, PERIOD and END OF STORY.
    I too am a die hard old school Thinkpad enthusiast and with the company's service could match their classic products.
    I have an X201 that I generall love, but would appreciate more speed, an SSD and I have to drive at least 3 external monitors, using at least 1920 x 1080 resolution.
    Perhaps a W series Thinkpad would work, but I also travel so going up to the T430s was already a sacrifice vs the small size of the X201.
    There are some 3rd party solutions but they are expensive and not so sure how plug and play they are with 3 or more monitors - what the T430s and Mini Dock 3.0 are SUPPOSED TO DO.  But they dont.
    Not giving up yet, but this has been a real bummer.
    PS
    Lenovo was very focused, efficient, and uncompromising when charging my CC for "premium" support.
    Solved!
    Go to Solution.

    Thors,
    Thank you and happy to report, albeit after all the hours and now weekend number 3:
    1) For the moment, I am able to repeat the 3 screen performance using mini DP from the Thinkpad and 2 DPs from the dock to the external monitors
    AND
    2) For the first time ever, I am just now for the first time running the 3rd external monitor from the VGA port on the dock.
    That is what I meant by using the various ports on the dock, so that the Thinkpad can simply be docked and undocked without connecting the mini DP - the purpose of a dock obviously.  As stated in other threads and articles, various configurations of the dock ports supposedly work to achieve 3 external screens, but until today was not able to do this.
    That is the good news and thank you for all help.
    The bad news is I stil have no clear idea why this has been so difficult, or where the problem lives that consumed so many hours of my own time and many hours with Lenovo tech support as stated above.
    Some success seems to have happened only after more than one set of LONG updates to Windows 7 (?)
    If I can replicate this set up the office (where I have 3 of the same monitors) I will be almost there.
    Thank you again to all for help and support.

  • [solved] Digital Camera not recognized in device-manager

    My digital camera "Canon Powershot SX120 is" is not recognized by the devicemanager. I have read Digital Cameras.
    $ groups
    wheel storage users printadmin
    The "camera"-Group isn't needed anymore and this group doesn't exist on my system.
    The Powershot SX 120 has a  MTP/PTP connection mode (as the manual says). But:
    # mtp-detect
    Unable to open ~/.mtpz-data for reading, MTPZ disabled.libmtp version: 1.1.6
    Listing raw device(s)
    No raw devices found.
    gphoto succeed:
    $ gphoto2 --auto-detect
    Modell Port
    Canon PowerShot SX120 IS usb:002,019
    A gphoto --summary could be found here
    There is no udev-rule for this camera. If i create one while copying a rule from a similar camera from /etc/udev/rules.d/69-libmtp.rules, and store it into /etc/udev/rules.d/69-canon.rules, the device-manager shows up. My udev-rule:
    # Canon PowerShot SX120AX (PTP/MTP mode)
    ATTR{idVendor}=="04a9", ATTR{idProduct}=="31e0", SYMLINK+="libmtp-%k", ENV{ID_MTP_DEVICE}="1", ENV{ID_MEDIA_PLAYER}="1"
    The device-manager shows me only the option to open with a file-manager. Doing so will result in an error:
    The file or folder udi=/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:02.1/usb2/2-8/ do not exist.
    With my udev-rule:
    solid-hardware listen
    Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
    Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
    Listening to add/remove events:
    Device Added:
    udi = '/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:02.1/usb2/2-8'
    Without the active udev-rule, "solid-hardware listen" produces nothing, but
    udevadm monitor
    monitor will print the received events for:
    UDEV - the event which udev sends out after rule processing
    KERNEL - the kernel uevent
    KERNEL[5077.662572] add /devices/pci0000:00/0000:00:02.1/usb2/2-8 (usb)
    KERNEL[5077.662655] add /devices/pci0000:00/0000:00:02.1/usb2/2-8/2-8:1.0 (usb)
    UDEV [5077.681178] add /devices/pci0000:00/0000:00:02.1/usb2/2-8 (usb)
    UDEV [5077.693035] add /devices/pci0000:00/0000:00:02.1/usb2/2-8/2-8:1.0 (usb)
    Don't know what to do ... is a udev-rule necessary to bring up the message from device-manger? Or is the Camera not recognized as a mtp-device (the Camera has no such settings)? How could i figure it out?
    With Digikam i could import Fotos, but i would do so with gwenview. I've tried to check it out with gwenview_importer:
    $ gwenview_importer --udi '/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:02.1/usb2/2-8'
    QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    gwenview_importer: Missing required source folder argument.
      (don't care about the different udi, i took this example from a former try) but i don't know, how to find out where the "source folder" is ...
    Last edited by quiqueck (2014-02-26 20:10:25)

    I have solved this by making an extra udev-rule for my camera. See my adventure on forum.kde.org for details

  • Just boot camped mid-2012 MBP using Apple's BootCamp 5.1.5621. However, no wireless adapter is listed in device manager

    [In Windows 8.1] When I access the Device Manager, it does not list my wireless adapter as one of the devices available. I have attempted to manually install the drivers from the BootCamp 5.1.5621 file.
    I've spent several hours attempting to remedy this but have only found threads explaining how to solve the problem if the 802 adapter is already listed in the device manager.

    I recently had some BT issue's in Win8 so I wrote a topic about this subject. Maybe you need to replace the Broadcom drivers as well.
    Please have a look here:
    Apple Wireless Keyboard Windows 8 problem
    Good luck.
    Marcel

Maybe you are looking for

  • Upload functin works in Edit mode but not in View mode

    I am using the Oracle AS 10g PDK to integrate struts application into Portal. I found the upload function works fine in portlet edit mode, but it doesn't work in view mode (Go to the "The page cannot be found" and URL is "http://servername/portal/pag

  • Window.opener

    HI, We've got an external ITS application with a popup window to call. we called it with: var w1=window.open('', '', windowprops); w1.document.write("<html><head></head><body>Hello World</body></html>"); and it worked well. But on internal ITS it doe

  • (How) Can I include Long Texts in Reports or Queries?

    Hello, We need to send our vendors their contract details including some of the long texts data. So far we were sending excel spreadsheets to the vendors without the long texts. Is there some way we can start sending the spreadsheets to our vendors a

  • Restrict "Enter, delete and backspace" in TextArea

    Hi,      I want to restrict Delete key, Backspace key,  and Enter Key in TextArea. Please tell me how to restrict these 3 keys. Thanks in advance. Regards, Kameshwaran A

  • Regarding intrastat inclusion/ exclusion report

    Hi,      In the billing document header data under the for trade  tab and in the declaration there is a field called inclusion/exclusion indicator.some one please explain how this field is given a value.urgent pls. Thanks In advance