T430S device manager: USB-IF x HCI USB host controller is not working properly

Hi ,
How to change get ride off the exclamatory mark on this device:
Problem:
Device manger Intel WiUSB: USB IF x HCI USB Host Controller always has the exclamartory mark on it.
Device status: This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
Pls help, thanks.

Hey there wche5,
I found some information over on this thread may be beneficial to your situation. This controller enables USB over wireless as part of the Intel (WiDi) Wireless Display function. To obtain a fix you will need to go to the Intel Site, and run the Intel Driver Update Utility. This should identify any Intel drivers you have that are out of date, including the WiDi driver.
Other threads on the forums point directly to this driver by Intel that typically resolves the problem, found on this thread at the end.
 I hope this able to assist you in getting a solution to your issue, Thank You wche5!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

Similar Messages

  • Sat. A300 - USB ICH8 Family USB Universal Host Controller is not working

    Device: Intel(R) ICH8 Family USB Universal Host Controller - 2830 till 2836 and 283A
    Driverversion is: 8.0.0.1008
    Driverdate: 15.09.2006
    is not working!
    Can anybody help me? Where do I find the actual driver?
    Thanks in advance.
    Chris

    The Intel Chipset driver handles USB drivers. You can download it from the Toshiba Support/Drivers Website.
    But if you installed a strange USB Device recently (perhaps a USB keyboard/mouse/HDD), its driver may be conflicting. So you would need to remove that driver from Control Panel -> Program Features first, then reinstall the Intel Chipset Driver.

  • Intel usb 3,0 extensible host controller driver not working

    I have a hp envy sleekbook 6 1100se. 
    Im facing a problem with the driver of usb 3.0 extensible host controller 0100 microsoft. It says that the device cannot start. gives a CODE 10 error.  Im using windows 8. i've tried updating it and uninstalling and reinstalling it but it doesnt help. I've restored the laptop to its factory settings and then for like 10 minutes the usb 3 ports worked fine and so did the driver. but i restarted my pc and again it gave me error code 10. Its also got something to do with the date of the computer. in the events of the driver it said device started in the date 8/28/2012. but after i changed the date it stopped working. but now this fix doesnt work when the second time i reset my computer. 
    i also know its not a hardware fault because when i plug in my usb in the usb 3 port, the device turns on its light which means that its working. put the computer does not open it or detect the usb drive. 
    Help please. ! 

    Hi,
    Please use the following post:
        http://h30434.www3.hp.com/t5/forums/replypage/board-id/General/message-id/76373
    Thanks.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Windows reports that the "USB-IF xHCI USB Host Controller" device is not working properly.

    I have been receiving the following error and instructions to fix it for a long time now, prior to updating to Windows 8.1:
    A device is not working properly
    Windows reports that the "USB-IF xHCI USB Host Controller" device is not working properly.
     Recommended solution to the problemUse Windows Update to check whether new device drivers are available. Proceed as follows:
    Open Device Manager
    Search in the device manager for the device whose driver you would like to update and double-click on the device name. You may first have to enable the "Show hidden devices" entry in the "View" menu.
    Switch to the Driver tab, click Update driver and follow the instructions
    When I follow the instructions and try to update the driver, I am told "The best driver software for your device is already installed."
    How do I update the driver to stop receiving the error?  
    This question was solved.
    View Solution.

    I have solved the initial problem.    
    I found the solution on the Forum at http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03926756&tmp_task=solveCategory&cc=us&dlc=en&la...

  • Usb not working properly in windows 7 x64 (890FXA-GD70)

    Hi,
    I am currently having problems with my USB ports.  A select few ports are not working.  In the device manager, windows claims to have not started up related drivers.  I tried fixing this by updating the drivers from the msi page.  This caused all the usb ports to stop working.  I am not sure what the problem is but however it does seem isolated to my windows 7 x64 install.  My keyboard and mouse still work in bios, but not once windows 7 starts up.  The keyboard and mouse also work when I use the system disk to restore back to a system checkpoint.  I am at a loss as to what could be causing this or how to fix it when the drivers supported are failing me.
    Any help would be appreciated. Thanks.
    Chris

    Quote from: Bas on 19-November-10, 22:57:34
    Those few need extra drivers.
    As they are USB3.0 ports: http://eu.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=2025
    Yea as I stated earlier, after installing these drivers all the usb ports stopped working in the current windows 7 install.

  • USB Hard Drives Not Working Properly?

    I have an MSI K9N Neo V2/V3? (msi-7369) motherboard with 2GB Ram and an Athlon 64 x2 4200+ processor.
    I have a strange USB Port problem! I have a 5 year old home built machine running Windows 7 32bit. Lately the USB ports on the front and back of the machine are not working properly with external hard drives? USB powered or mains powered. They are recognised and show all the folders but If I try to view or transfer anything it freezes the drive?
    The ports are working fine for USB sticks though?
    I have removed the USB controllers and let the system reinstall them again, but its no better?
    I would format the drive and reinstall windows but I have not backed-up all my videos I want and my system restore has been disabled?
    I have tried a new USB PCI card but the same happens?
    I have updated the bios and all updates with the MSI Live update program.
    Can anyone recommend anything to try before I start removing stuff?
    Someone told me to update my USB drivers but I can't find any?
    Any help appreciated

    I have formatted and installed Windows 7 64bit and USB's were working!!
    Updated and now they don't again?
    Its going out the window soon!!
    Could the firmware update play a part? Am I able to go back to the older firmware?

  • HT1338 I have macbook without a firewire port, I have usb 2.0 port, now my os is not working I can not get through apple logo loading , I can not enter safe mode, I can only enter one user mode, how can I backup my data, I have very important data in my h

    I have macbook without a firewire port, I have usb 2.0 port, now my os is not working I can not get through apple logo loading , I can not enter safe mode, I can only enter one user mode, how can I backup my data, I have very important data in my hdd

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • Bootcamp 3.2: Microsoft Virtual WiFi MiniPort Adapter shows "device is not working properly...Code 31"

    Using Windows 7 Enterprise 64-bit, Microsoft Virtual WiFi Miniport Adapter shows the "device is not working properly because Windows cannot load the drivers required for this device. (Code 31).".The device is the Apple iMac10,1 All-in-one computer. Right clicking browse files (for the device) shows the Bootcamp (C:), DVD (D:); and my external hard drives can be selected.
    Internet and WiFi connections all working ok. Am also running MacDrive 8 to access the Mac drives when in the Windows partition, again without any seeming issues.
    Updating the driver simply generates another Code 31 error.
    Appreciate this seems to be a known problem - is the a solution a novice use might be able to follow or should I simply ignore the error message?
    Driver Date us 21/06/2006 and Driver Version is 6.1.7600.16385.

    Hi  ,
    Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP ENVY 4-1204tx Ultrabook and issues with WiFi adapter is not working properly. Error codes in Device Manager in Windows  8.1 could be fixed by deleting any extra drivers. So I would uninstall all that is listed in the Network drivers in the Device Manager, restart the Notebook. Here is a list of Device Manager options, this might help.
    Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating or reinstalling. Hope this helps. Thanks.

  • I am using Ubuntu; iTunes installed via wine is not working properly. So how should i sync my apps on iTunes and device?          When will iTunes come to Ubuntu

    I am using Ubuntu; iTunes installed via wine is not working properly. So how should i sync my apps on iTunes and device?
    When will iTunes come to Ubuntu?

    See:
    *http://kb.mozillazine.org/Firefox_crashes
    *https://support.mozilla.org/kb/Firefox+crashes
    If you have submitted crash reports then please post the IDs of one or more recent crash reports that have this format:
    *bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
    You can find the IDs of the submitted crash reports on the <i>about:crashes</i> page.
    *You can open the <b>about:crashes</b> page via the location bar, like you open a website, or open this page via "Help > Troubleshooting Information".
    See:
    *http://kb.mozillazine.org/Mozilla_Crash_Reporter
    *https://support.mozilla.org/kb/Mozilla+Crash+Reporter

  • HT1212 my phone touch system has been destroyed i have to make a backup in laptop but when i m connecting ma device to itunes of ma laptop so its saying your device have a paascode like ma phone touch system is not working how should i type ma pass word ?

    my phone touch system has been destroyed i have to make a backup in laptop but when i m connecting ma device to itunes of ma laptop so its saying your device have a paascode like ma phone touch system is not working how should i type ma pass word ??? is there any way to open ma device from laptop nd sync my data , contacts etc to ma laptop ... i have to make my phone repair then...please help with thiss...

    Sorry No, if your screen is broken, then you won't be able to unlock your phone.
    You do backup your phone on a regular basis right?

  • Enterprise manager not working properly.

    Hi All,
    I am using Oracle 10g R2 on fedora machine my first database name is orcl then i created second database by dbca by the name orcl2 after that my Enterprise manager is not working properly that is i am not able to login to my database through EM.
    Then i deleted my listener LISTENER and created two new listeners by name LISTENER and LISTENER on port no 1521,1522 respectively .
    when i issue command lsnrctl start listener
    and
    lsnrctl start listener1
    both of my listeners gets started sucessfully.
    but when i start EM i get the same problem.
    ---- please help me to resolve this issue .

    hi,
    Duplicate forum
    listener configuration giving error.
    Regards
    Jafar

  • My program does not work properly. I run the program but it is not capable of adding any of my ebooks and when I connect my ereader, it recognises the device but  it does not add any ebook either.  I uninstalled the program and reinstalled again but nothi

    my program does not work properly. I run the program but it is not capable of adding any of my ebooks and when I connect my ereader, it recognises the device but  it does not add any ebook either.
    I uninstalled the program and reinstalled again but nothing gone better-
    What should I do?
    Best regards

    Do you have Logitech gaming software installed on the PC? If so, perhaps try the suggestion from the following post:
    Re: Everytime I close Itunes it loads back up

  • Device driver not working properly

    windows reports that the BHDrvx64 device is not working properly. have tried everything to fix including  system restore. windows does not have an update for this device, also tried hp software and driver downloads site and could not get specific information on exactly what kind of device it pertains to.  right now system is not to bad and would hate for it to crash on me

    Lia.
    Are you using Norton???
    REO
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • In My IPhone the sound device not working properly. I can here the sound through head set only.kindly send an idea ti solve this problems

    In My IPhone the sound device not working properly. I can here the sound through head set only.kindly send an idea ti solve this problems

    Hello. I sent my WRT1900AC V1 to Linksys four days ago (Monday) via UPS with a RMA. Linksys paid the shipping and everything. The router is still in route, and it should arrive to their offices tomorrow. Once they receive the WRT1900 AC V1, they are going to send me an EA8500 as a replacement. But I have been reading the comments about the EA8500 here in the forum and it seems to have the same problems. I guess the firmware is extremely flawed in both routers (maybe it is almost the same code?). Anyway, I will try the EA8500 and I hope it works. I bought a temporary router from Walmart and I paid $35 for it. It is a Belink N600 DB. I can't believe that a $35 router is working a lot, lot, lot better than my previous $250 WRT1900AC router. Unbelievable. If the EA8500 doesn't work, I'm going to try and get my money back from Linksys, or contact The Consumerist or someone to get my money back and get a Nighthawk instead.

  • USB media device not working properly

    Hello, I have a USB surround sound device that I cannot seem to get working properly. The audio works for the front speakers but will not work for the center or subwoofer. I have gone into the midi/audio device and switched it to multichannel, and it still wont work. The weird thing is that when I test the center and subwoofer speakers under the multichannel settings they respond, but when playing audio I can't get them to work. Any suggestions?
    Black MacBook 2 GB RAM   Mac OS X (10.4.7)  

    I have formatted and installed Windows 7 64bit and USB's were working!!
    Updated and now they don't again?
    Its going out the window soon!!
    Could the firmware update play a part? Am I able to go back to the older firmware?

Maybe you are looking for

  • Function Module to run as Background Job

    Hi All Could anyone tell how can i run a RFC function module as Background job, Right now, one external application calling this RFC FM, when this is getting executed, i can see a dialog process is occupied in SM50. Now o avoid this, i want when exte

  • ICal subscriptions between two users on the same computer??

    Hello, Im hoping there is an easy free fix to this issue. Im trying to have my iCal and my girlfriends iCal work seamlessly together. I want to be able to see all changes made by her and vice versa. Unfortunately neither of us have mobileMe or a serv

  • License query

    Hi, I have a query about licensing. This should be the realm of the suppliers, but I'm finding it hard to get an answer without going off and having a meeting wherein we commit to a purchase. I know most vendors with an "educational" license, allow t

  • Human Workflow

    Hi All, Currently I am working on Human work flow activity, where my requirement is ,I will be sending 'creator' through request.aslo i ll be using getManager() fuction in Human WorkFlow Activity. ids:getManager(/task:task/task:creator) my payload is

  • Problem in image?

    Hi I am trying to upload an image into server.I have selected image from filesystem and displayed into screen(from server). My problem is when the image size is greater than 10kb(like my pictures in windows),i will get scroll bars in my front end. Ho