T430s Issues with Power Manager

Just to note, I don't have the big issue with the DCC and FCC not matching up that seems to be plaguing many of the T430s users. I do have a Panasonic battery, FYI.
So I got my T430s late August and for the past few weeks, I've been noticing that I lose about 1% of battery a day even though it is plugged into AC.
I also have a problem with the laptop not going into non-AC mode when I pull the adaptor out of the socket. It remains on AC mode, which drains the battery more than it should be. I have to physically go into the power manager and change it to a power saving mode for it to change down. This doesnt happen all the time but it does happen quite frequently. My default power setting is default "Power source optimized"
My Power Manager firmware is 6.36 (I think this is the latest one)
Anyone else having these issues? Any firmware upgrades that should fix this problem?

'afternoon...
Welcome to the community.
Not sure if it will help out, but please check to be sure you also have the latest Power Management driver installed. You can find it in your driver matrix. I don't have the link immediately at hand or I would post it.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Similar Messages

Issue with Power management MSI Gforce GTX 770

Hello,
I contact you since I have bought one month ago a GForce GTX 770
I do not have the serial Number but could havez a look at it quickly if needed
I have since the beginning recurrent issues with the graphic cards and require support.
System Windows 7 64 bits
Last official Pilots up to date 335.23
I also tryed the provided drivers 331.21 (9.18.13.3182 more precisely)
Issue
When the graphic cards is reauired high demands (in case of high GPU demand for games) the nvidia driver is crashing (nvlddmkm.sys). Sometimes windows recovers, sometimes not, the system is fully dead and only windows restore function could help restarting the system and restore stable driver set.
Quote
Nom du journal :System
Source : nvlddmkm
Date : 17[SLASH]05[SLASH]2014 14:50:50
ID de l’événement :14
Catégorie de la tâche :Aucun
Niveau : Erreur
Mots clés : Classique
Utilisateur : N[SLASH]A
Ordinateur : Fabien-PC
Description :
La description de l’ID d’événement 14 dans la source nvlddmkm est introuvable. Le composant qui a déclenché cet événement n’est pas installé sur l’ordinateur local ou l’installation est endommagée. Vous pouvez installer ou réparer le composant sur l’ordinateur local.
Si l’événement provient d’un autre ordinateur, les informations d’affichage doivent être enregistrées avec l’événement.
Les informations suivantes étaient incluses avec l’événement :
[BSLASH]Device[BSLASH]Video7
CMDre 00000000 00000474 ff1fe205 00000007 00000000
XML de l’événement :
[XMLIN]Event xmlns="..."[XMLOUT]
[XMLIN]System[XMLOUT]
[XMLIN]Provider Name="nvlddmkm" [SLASH][XMLOUT]
[XMLIN]EventID Qualifiers="49322"[XMLOUT]14[XMLIN][SLASH]EventID[XMLOUT]
[XMLIN]Level[XMLOUT]2[XMLIN][SLASH]Level[XMLOUT]
[XMLIN]Task[XMLOUT]0[XMLIN][SLASH]Task[XMLOUT]
[XMLIN]Keywords[XMLOUT]0x80000000000000[XMLIN][SLASH]Keywords[XMLOUT]
[XMLIN]TimeCreated SystemTime="2014-05-17T12:50:50.254312800Z" [SLASH][XMLOUT]
[XMLIN]EventRecordID[XMLOUT]3277[XMLIN][SLASH]EventRecordID[XMLOUT]
[XMLIN]Channel[XMLOUT]System[XMLIN][SLASH]Channel[XMLOUT]
[XMLIN]Computer[XMLOUT]Fabien-PC[XMLIN][SLASH]Computer[XMLOUT]
[XMLIN]Security [SLASH][XMLOUT]
[XMLIN][SLASH]System[XMLOUT]
[XMLIN]EventData[XMLOUT]
[XMLIN]Data[XMLOUT][BSLASH]Device[BSLASH]Video7[XMLIN][SLASH]Data[XMLOUT]
[XMLIN]Data[XMLOUT]CMDre 00000000 00000474 ff1fe205 00000007 00000000[XMLIN][SLASH]Data[XMLOUT]
[XMLIN]Binary[XMLOUT]0000000002003000000000000E00AAC00000000 000000000000000000000000000000000000000 00[XMLIN][SLASH]Binary[XMLOUT]
[XMLIN][SLASH]EventData[XMLOUT]
[XMLIN][SLASH]Event[XMLOUT]
Sorry for the replacements of XML and slashes stuff but it can t validate and can't validate either the code tag...
Result
Impossible to play games such as Diablo 3 Reaper of Souls without having a crash every 5-15 min...
Impossible to run 3Dmark tests until the end. It somehow crashes sooner or later.
In low charge the driver never crash.
Tests I did
Based on this new computer (everything is new into it)
- Power supply seems to be the cause, thus i tested a more powerful one (520w to 700w) same result
- i changed the card of PCI express plug on the mother board which did not do anything
- I reinstalled fully win 7 and did the minimum installs such as antivirus and graphic drivers from nvidia. same result
- I updated Power supply windows settings to high performance in order to disable auto adaptative voltage from the system. same result
- I updated as well power supply nvidia option to best performances which did not solved the issue as well.
Tests I did not do, since they are intrusive
Update the Bios ? did not know if you have a more recent one
My bios version is NV282MS.3A0
Downclock the graphic card
I will soon extract the card to put it in another computer to validate that this the card[SLASH]pilot that is having issue:
What should I do to have a clear evidence of the issue which could be either the card itself, of the bios which does not manage properly the power consumption ?? How can I send you useful logs ? Is there is a diagnostic tool to provide you with better data to dig in ?
I am stucked and unable to use properly this nez configuration ...
Thanks in advance for your help
best regards
Fabien

Okay, some more hints to graphic Card issue ...
- Tested qnd Confirmed with another Games GTA4 Same Crash
- Board Bios already up to date.
- GTX770 has been put into an old computer, and the new one got a HD5850
Comparison of confs (changes in bold)
New Computer
Board: MSI B85-G43 Gaming
Bios: Version 1.0
VGA: Radeon HD5850
PSU: Antec 520W
Intel Core i5 Quad 4570K (Haswell) 3.20GHz [C0] Family 6 Model 60 (3C) Stepping 3 Revision 17
MEM: Corsair Vengeance 2x4gb
HDD: 1To SSHD
COOLER: Corsair CWC-9060007-WW Water Cooler
OC: No
OS: Windows 7 x64 Ultimate V6.01 Build 7601 Service Pack 1
Old Coputer
VGA: MSI GeForce GTX 770 BIOS NV282MS.3A0 80.04.e6.00.1e
N770 TF 2GD5/OC sn 602-V282-41SC14-02009565
PSU: Cooler Master 700W Silent Pro
Intel Core 2 Duo @2Ghz
MEM: Corsair 4x1gb
HDD: 500Go
OC: No
OS: Windows 7 x86 Ultimate V6.1 Build 7600
Note that both GTX770 tests have been done with same provided MSI drivers
Result
1 Old Computer with GTX770
Crash reproduced after a full 3D Mark
My idea is that the computer itself is old and do not ask so much the GPU to work. Hard to reach the full power requirement. It has also a small 1280x1024 screen. But problem finally reproduced... so Issue lies in the Graphic Card
2 New computer with old Radeon
3D Mark fully launched multiple time without any crash
Another hint saying Graphic Card has issue.
Now a few questions :
- Does the NVidia Bios flash changes the guarantee on it ? I mean the CG is new, I do not want to lose the guarantee.
Thanks a lot for your time.
Best regards

" Compatibility issues with power management. on g50 45 . please help.

LENOVO G50-45my BIOS is up to date and I updated my power management system just yesterday. The battery also drains very quickly , just 90 minutes. Please help.I am getting this problem since a week now. and my battery drains so quickly even when on power saver mode. when i click on the message , I get no solution although my laptop is connected to internet it says , its not connected.And when i click on it , it says , Now if I click " View all problem this applies to , it says a different thing, there are two things saying the sam thing, driver software installation. wheni click one of them it says, " Pnp driver not found" PLEASE HELP. Thank you. I want my power manageent system back.

You should check your startup drive as a starting point, if programs are crashing regularly. That's obviously not "normal." Run +Repair Disk Permissions+ in Disk Utility while started up normally. Then, start up from another disc and run Disk Utility to use the +Repair Disk+ on the startup drive, to look for disk directory issues (you can startup from the Mac OS X installation disc to run Disk Utility).
When this happens, Force Quit doesn't do anything. Any other options?
You can start the Activity Monitor program and quit processes that look relevant to the app. Sometimes, force quit does not work to quit an app because an underlying process keeps running. Sometimes, the Mac is not able to restart or shutdown normally because an app refuses to quit, due to this problem. It is often difficult to know if you should kill a process, so after doing it to make an app quit, it would be a good idea to restart.

T430s not entering 30 Day Standby with Power Manager

I have a T430s with Windows 7 Pro 64-bit that is not entering 30 Day Standby like it should. The issue seems to lie with Power Manager.
Inside of Power Manager I have the 30 Day Standby option checked, just like I should, and it is also reflected in the BIOS setup as well. If I change the BIOS transition time for 30 Day Standby to "Immediately" and start Windows, but don't log in, and put the computer to sleep. It almost immediately wakes up and transitions into 30-day standby.
Now I know that Power Manager has a "hard coded" setting of 3 hours, regardless of the BIOS setting. So after 3 hours, Power Manager will automatically wake up the computer like it would to transfer to 30-day standby, but it just goes back to normal sleep.
Today while on battery, it did this twice (according to the Windows Event Log) Wake up, and go back to Sleep / Standby (S3). In the logs, the wake source is listed as "Unknown" when it goes back to sleep 10 or so seconds later is listed as "Application API".
Like I said, I was running on battery, and I also went into device manager and unchecked anything I could think of that would have an option of "Allow this device to wake the computer". I also disabled the Wake-on-LAN option for the LAN card. Plus I had all USB devices unplugged, as well as no Ethernet cable in the LAN port anyway. Plus it does transition to the 30-Day standby if I force the computer to sleep at the login screen before Power Manager is loaded.
If anyone could help me get this resolved I'd really appreciate it!!
EDIT: I just wanted to add I should have all driver / software updates as of Dec. 1 or so. I'm running Power Manager 6.63.1 and Power Management Driver 1.67.4.4.
Solved!
Go to Solution.

I could not reproduce any problem with the following configuration:
T430s
BIOS 2.57
All BIOS default settings
Windows 7 64-bit
Power Management Driver 1.67.4.4
Power Manager 6.63.1
I'm not sure what could cause this on your computer, but I would try the following things:
Load BIOS default settings (enter BIOS F1 Setup, press F9 to load defaults, F10 to save & exit)
Toggle the setting for 30 Day Standby in Power Manager. Turn if off, reboot the computer, turn it on, reboot the computer.
By the way, you can actually change the 3-hour timer by modifying registry. There just isn't any option for it in the Power Manager GUI.
HKLM\Software\Wow6432Node\Lenovo\PWRMGRV\Data\ISSC
There's a value called "S3TimerForIFFS". This is the number of minutes until 30 Day Standby Deep Sleep starts. The default value is 180. You can change it to any value 1 or greater. This timer is not exact but should be within a few minutes.

Having issues with profile manager on 10.9 loosing users/device assignments.

I'm having issues with profile manager on 10.9 loosing users/device assignments. Luckly I only have arround 70 devices added so far. The first time it happened I thought it was just a freak thing, but it has just happened again. What I find weird is nothing on the server was changed, no devices added. So when this happens my users phones lose access to email, because I'm using variables, which rely on the user being assigned to the device. Anyone know how to fix this, and if not. Does anyone know how to backup and restore just profile manager in 10.9. Thanks.

I enabled all users in my AD "Domain Users" group access to "Profile Manager". I had also initially enabled "Profile Manager" access for a few individual users. Those users did not loss the device assignments. I'm not absolutely sure why/if allowing access for a group is causing this issue. Enabling access for each person would be very time consuming.... Maybe adding access to the individual users is importing that user into OD?

Issues with Messaging Manager in ATG 10

Hi,
We are facing an issue with messaging manager. In weblogic we have configured datasource as 'coreDataSource', somehow MessagingManager is looking for coreDataSource_shop and throwing error that Datasource is not available?
How to resolve this? I am using ATG 10.3 and Weblogic 10.3.5.
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager     limbo : error querying for messages     CONTAINER:atg.repository.RepositoryException; SOURCE:java.sql.SQLException: Unexpected exception while enlisting XAConnection java.sql.SQLException: XA error: XAResource.XAER_RMFAIL start() failed on resource 'coreDataSource_shop': XAER_RMFAIL : Resource manager is unavailable
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager     oracle.jdbc.xa.OracleXAException
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager          at oracle.jdbc.xa.OracleXAResource.checkError(OracleXAResource.java:1110)
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager          at oracle.jdbc.xa.client.OracleXAResource.start(OracleXAResource.java:240)
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager          at weblogic.jdbc.wrapper.VendorXAResource.start(VendorXAResource.java:50)
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager          at weblogic.jdbc.jta.DataSource.start(DataSource.java:729)
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager          at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1231)
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager          at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1164)
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager          at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:285)
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager          at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:522)
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager          at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:449)
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager          at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1599)
**** Error     Tue Nov 29 04:28:20 IST 2011     1322521100638     /atg/dynamo/messaging/MessagingManager          at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1503)
Thanks
Gopi

still the issue is exist.
At one point of time, Database is not able to provide connection for coreDataSource. After that shop is trying to get connection from JNDI coreDataSource_shop, which is not available in weblogic.

Issues With Football Manager Live

Over the last few days I have had issues with Football Manager Live for which I have played for a year with no issues. At around 7 pm the game just died, yet I have no trouble playing any other online games that require more bandwidth. I read the FML forums and there are lots of people saying they have the same issues with BT. Can anyone please provide a solution? Many thanks

Hi James,
Thanks for the post and welcome to the forum.
Have you been able to play Football Manager online again? There could be a number of reasons for the game drop out but I think broadband speed would be a good place to start.
Please run a speed test via www.speedtester.bt.com and post your results here, this will give us a clear picture of how your connection is running and if there are any issues. At the very least we can rule out broadband speed being the cause.
Cheers
Sean
BTCare Community Manager
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

X60 - Screen flickers and screen shutoff - problem with power management or hardware failure?

Hello everyone,
this is one of the longest unsolved threads in Lenovo Forum. To keep a summary of the posts for new victims (as suggested by PDG in page 23, edited by me):
Bottom line:
This is a video driver problem
If you have XP and can, roll back to 4450 (I currently run with 4860 in XP without problems)
If you have Vista you are basically screwed. No one has posted any link to a functioning V32 driver.
You can find a link to a backlevel XP driver on p.21 or thereabouts.
{Windows 7, Linux} may or may not help. (no problems for me with Ubuntu 8,9 currently)
LENOVO WILL NOT HELP. Don't waste your time. Lenovo will say its a hardware problem because that's all they know and charge you big bux to do basically nothing when you ship them your PC.
This is the original entry:
Hi,
I always stay at the current level of available drivers with System Update.
In the last days the screen starts to flicker / jiggle once in several minutes until suddenly the whole screen turns black and can't be reactivated. I then put the X60 into standby and it wake up right after. The screen is then turned on again...
Its a 1706-AA7...
I rolled back the graphics driver to an earlier version, didn't help. Does it look like some faulty power management? Or a potential HW issue?
dsp
UPDATE: this time the screen was totally light blue... same workaround: standby -> wakeup
UPDATE2: I removed the driver completely and installed it manually from the driver matrix page. It took a couple of reboots. In between resolution was down to 640x480 with 4 bit. Not its working again without flickering...
Was this a wrong driver pushed via System Update?
Message Edited by dsp on 04-07-2008 07:01 AM
Solved!
Go to Solution.

Hi,
no - 2 video adapters are correct! You should not remove them. Read the Intel FAQ here.
Strange - could it be that it also updated your video driver the same time? When I rolled back the video driver to a very old version, I never experienced the flicker again. No colorful blanks anymore.
The Intel downloadpage offers a backlevel driver for the chipset;
* Microsoft Windows* XP
* Driver Revision: Production Version 14.32.3
* Package: 43262
* Graphics: 6.14.10.4906
* HDMI Audio: 5.10.0.1030 But I don't know whether I should try. This release doesn't appear in the Thinkpad video driver history. Hopefully the bug will be acknowledged and they work for a fix. Where should bugs be reported, when they are not taken serious by the first level support?
dsp
Message Edited by dsp on 05-06-2008 01:19 PM

Lenovo Z50-70 compatibility issue between power management ....

Hello I got my Lenovo Z50-70 Back in May 2015 and decided to reinstall the OS cause I didn't want the bloatware that came with the computer. I installed the drivers that came with the computer and now I'm getting a power management compatibility issue that I can't seem to find the solution to online. I believe this is part of the problem as to why my computer only charges to 60%. Some forums have suggested Bios issues but idk how I would go about approaching that issue so if anyone could help me solve this issue, that would be greatly appreciated. Description
Windows detected a new device attached to your computer, but could not find the driver software it needs to make the device usable. Each device manufacturer typically includes driver software of a CD that comes with the device, or as a download from its website. The hardware ID of your device is ACPI\VEN_VPC&DEV_2004.Problem signature
Problem Event Name: PnPDriverNotFound
Architecture: x64
Hardware Id: ACPI\VEN_VPC&DEV_2004
OS Version: 6.3.9600.2.0.0.768.101
Locale ID: 1033Extra information about the problem
Bucket ID: a174dfba8fc39d6da507dde9f5dc0925 (-1543083658)

hi sreedhar2009,
Welcome to the Lenovo Forums.
Just to verify, was the machine running on Windows 7 before and you upgraded to Windows 8 via the upgrade advisor?
- If this is the case then you will need to uninstall the Lenovo Energy Management for Windows 7 from the Control Panel > Programs and install the Windows 8 versions below (reboot if necessary):
For Lenovo G580 (2189, 20150):
Lenovo Energy Management
Windows 8 32/64bit
em8.0.2.5.exe
45.4MB
For G580 (2689, 20157):
Lenovo Energy Management
Windows 8 32/64bit
em8.0.2.3.exe
45.4MB
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Phantom device problem with Power Manager in Win7, look at the pics

Hi All,
I found a phantom "Powered Off" device in My Computer, see the following picture:
http://img23.imageshack.us/img23/8097/mycomputeru.png
It's probably related to the Power Manager (version 3.11a), because when i right-click on the device, i see the Launch Power Manager option:
http://img691.imageshack.us/img691/7779/poweredoffproperties.png
Clicking Power on or Eject does nothing.
There are no devices missing in the Device Manager, and everything is powered and running.
No errors or warnings in Event logs. No issues with Windows at all.
Restarting Windows makes this dissapear.
Any clues on what's this device?
X200T 7449-EKU, Windows 7 Ultimate 64-bit.
Note from Moderator: Image(s) >50k converted to link(s).

Aim better?
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Lenovo T60 Strange problems with 'power management/power guage'

Guys
Since doing a system update my battery guage keeps displaying a grey guage with 3 - inside and if you run the mouse of the icon it says "Battery Not Installed" then 1 minute later it goes green with 100%. Its so random all i can imagine is that there is a problem with the power mangement software, but i have uninstalled the new version and installed an older version but this again doesnt work
I have tried to disable the PM driver from device manager and the Atmel TPM device but these do nothing
I have heard that this was quite common but cant find a solution
Can anyone help
Regards
This was found doing a google search
I have a strange issue. I have a Lenovo T60 laptop and I am experiencing problems with the power management/power guage.
It will often show the battery not installed (power gauge is a greyish-white color with dashed lines) or it shows a red X. It does not matter if I am on AC power or on Battery power, it will show the full range of power, battery level, not installed, or an error.
I have searched Lenovo's site and I seem to remember seeing an FAQ about this, but now that I need it, I cannot find it.
What can I check or do to stop this? While it is annoying, I am not sure if I am having a battery problem or not. I did check my battery on Lenovo's site to see if it was recalled and it is not.
I do appreciate any help that any one can give me.
Message Edited by iceman on 05-29-2008 05:05 PM
Message Edited by iceman on 05-29-2008 05:05 PM

Can anyone help?

Strange issue with Power Saver on my Satellite M30

When connected via mains to the power supply, my laptop is completely fine. However, when not connected (i.e. using it on battery), it shows 100% battery until about 90%, when I get a Windows Error Window "Toshiba Power Saver must be closed, would you like to send an error report etc." and then my battery on the taskbar becomes Critical - 3%.
Also, at this point, my processor speed slows down (which is noticable because applications take longer to load etc.) as if the laptop was going into Power Saver mode. I thought maybe this is a display error, so I left the laptop on just to see - and it turned itself off 5 minutes later!
Is this a software error or a faulty battery? Any and all help appreciated.
Best regards.

Hi John,
I think you may have a defective battery but just to be sure I would recommend that you reload the Toshiba Power Management software and then check the default settings for actions to be taken with display brightness, cpu speed, hard drive, etc. at the various stages of the battery capacity.
It is normal for the display brightness to reduce in stages as the battery capacity diminishes, and it is also normal for the CPU speed to slow as well. You can change this behaviour if you wish from within the Toshiba Power Management utility.
regards,

Serious issue with password manager - mouse selection in MS word 2007

A little while ago, after installing some thinkvantage updates, I started to loose selection with the mouse in microsoft word 2007 after few minutes of usage (and derivatives such as outlook). I have a T61 with Windows 7 64 bit ultimate.
I did many internet searches and surprisingly many other users who had this issue were Lenovo users so I'm not even sure if this issue is windows 7 specific.
Disabling totally the password manager solved the problem - so there might be a serious issue there...
Erik.

Confirmed here http://forums.lenovo.com/t5/Windows-7-Discussion/Weird-issues-with-T61-and-Win-7/td-p/179635
I forgot to subscribe to the topic

Does PCI6534 have issues with power on io's and host cpu not powered

Are there any issues with the PCI6534 when the io has power applied and one boots the host CPU?

Hello;
I couldn't understand exactly what you meant by that.
I'm assuming you are asking if you will damage the board in case the I/Os are active and the CPU is turned off. If that is the question, the answer is no, you won't damage the DAQ device.
Hope this helps.
Filipe A.
Applications Engineer
National Instruments

Problems with power manager and saving settings Gnome3

Hi guys,
I installed on my Arch Linux system two desktop environments: xfce4 und gnome-shell. On xfce4 anything is fine, but on gnome-shell some preferences were not saved. Especially the time (I'm living in Germany, and the System always shows local time + 1h) and the startup-applications which I setted with gnome-session-properites are saved but nothing happens on next startup (e.g. guake is in the list and is not started automatically).
An other point is that the desktop folder is not loaded (I setted it with gnome-tweak-tool), but when I manually start nautilus, it is shown.
The last point is the power manager. I'm working on laptop and the battery symbol is not shown. I can watch my battery status with executing 'acpi' but thats very annoying. Other components of the power manager are not working, too. The laptop turns off it's monitor, when nothing is done within approx. 10 minutes (I setted as well in the xfce power manager that the monitor should not be turned off as in the gnome-power-manager). I installed the gnome power manager simply with pacman -S gnome-power-manager. Just for you to know.
Thank you for reading this and hopefully you can help me...
pausch
PS: please do not mind my mistakes, i am german and do not natively speak english.
Last edited by pausch (2012-01-08 14:33:15)

pausch wrote:
@wonder
anything looks better now, i think gnome is not built to start that another way than starting gdm...
no, works fine with startx. you only need to add proper stuff in ~/.xinitrc like explained in the wiki.

T430s Issues with Power Manager

Similar Messages

Maybe you are looking for