T430s two finger scroll

Hi!
More often than not two-finger scroll only works after going back and for more that 10 times on the touchpad. I have the latest drivers but two finger scroll is sluggish and unreliable to pick up.
Are there settings to improve two finger scrolling?

Hi, theking2
I did some research on your issue and I found this thread that has users with a similar issue. One of the users, hysy, linked a program called TwoFingerScroll that helped him and many others. You may want to give that a shot.
Hope it helps,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Similar Messages

T430s Two finger scroll not working reliably

Hi!
Sometimes it works, sometimes it takes the skin of my fingers to get two finger scroll working.
The system update does not see a reason to update the drivers.
Is there more effective software for the synaptic touchpad to do two finger scroll?

Hi, theking2
System Update is a very useful tool, but I find it best to always check for driver updates manually, just in case the updater missed something. The latest version of the Syanptics driver can be found here and may help your issue.
Hope it helps,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

T430s two-finger scroll occasionally causes page to 'jump'

My problem occurs sporadically while using two-finger scroll to read documents online. I'll scroll up or down a little bit and the page will jump as if I had pressed pagedown or pageup (sometimes it jumps even further). I'm currently using Two-Finger Scroll and Chromium Wheel Smooth Scroller (a Chrome extension that provides smooth scrolling similar to Mac's inertial scrolling), and I've disabled SynTPEnh.exe since it interferes with GTK+ apps. I've updated my touchpad drivers and fiddled with the settings to no avail. Has anyone else had this problem, and if so, were you able to fix it?
Many thanks in advance to anyone who can share some insight regarding this issue.

I experience this sometimes, it is sporadic and doesn't happen all the time. I just scroll back to the right place. I use the trackpoint most of the time so this is not a very serious issue to me.

T430s: Old mouse drivers? (two-finger scroll broken)

Hi all,
I just used the lenovo update manager to update my mouse driver to version 16.2.19.2 (latest) for my T430s with Win 7. Previously I had been using the two-finger scroll all the time and have really been enjoying this feature. However, the new driver has been giving me some unwanted behavior - instead of scrolling only on two fingers, now it scrolls with one finger about half the time.
I've double checked that I'm not accidentally touching the pad with another finger. I one-finger edge scrolling disabled, as I have found this unreliable anyway. I can get back to reliable one-finger movement by un-checking the two-finger scroll from the advanced ultra-nav options in mouse settings. However, re-enabling this still gives the unwanted one finger scrolling for a touch anywhere on the pad.
So unless anyone has any better ideas, I'd figure I would roll back to the older driver. Unfortunately, the lenovo update manager has no history of the old driver, nor does windows device manager. And the driver listed on the lenovo site here, is the same version as the one I'm currently running. So.... anyone have the link to the old driver or any other ideas?
Thanks!
[Edited to avoid wall-of-text]
Solved!
Go to Solution.

Okay, I've tried multiple un-install / re-install cycles. I've removed the ultra-nav and synaptics files after uninstalling the driver from device manager and add-remove programs (you have to do both it seems). And a fresh re-install of both, together and individually.
The problem still persists.
After checking with other solutions on the forums, I gave a third-party program "two-finger scroll" a try (http://code.google.com/p/two-finger-scroll/) and it is working much better. I can't devote any more time to this problem, and this solution seems to be excellent.

[SOLVED]Two finger scrolling/tapping stoped working after xorg update

Hi everyone, i updated my system yesterday to the new xorg server (1.11.1-2). Everything works except for the two finger scrolling on my synaptics touchpad.
There is some info:
Kernel: 3.0.6-2 (stock)
Synaptics Touchpad driver: 1.5.0-1 (lastest)
Right side scrolling works fine, two or three finger tapping doesn't work either.
Here's my Xorg.log:
[ 172.989]
X.Org X Server 1.11.1
Release Date: 2011-09-24
[ 172.989] X Protocol Version 11, Revision 0
[ 172.989] Build Operating System: Linux 3.0-ARCH i686
[ 172.989] Current Operating System: Linux Xenogears 3.0-ARCH #1 SMP PREEMPT Fri Oct 7 10:11:05 UTC 2011 i686
[ 172.989] Kernel command line: root=/dev/sda2 ro quiet fastboot init=/sbin/e4rat-preload
[ 172.989] Build Date: 10 October 2011 08:49:15AM
[ 172.989]
[ 172.989] Current version of pixman: 0.22.2
[ 172.989] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 172.990] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 172.990] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 13 13:27:22 2011
[ 172.990] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 172.990] (==) No Layout section. Using the first Screen section.
[ 172.990] (==) No screen section available. Using defaults.
[ 172.990] (**) |-->Screen "Default Screen Section" (0)
[ 172.990] (**) | |-->Monitor "<default monitor>"
[ 172.990] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 172.990] (==) Automatically adding devices
[ 172.990] (==) Automatically enabling devices
[ 172.991] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 172.991] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 172.991] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 172.991] (II) Loader magic: 0x8228580
[ 172.991] (II) Module ABI versions:
[ 172.991] X.Org ANSI C Emulation: 0.4
[ 172.991] X.Org Video Driver: 11.0
[ 172.991] X.Org XInput driver : 13.0
[ 172.991] X.Org Server Extension : 6.0
[ 172.992] (--) PCI:*(0:1:5:0) 1002:791f:1631:c108 rev 0, Mem @ 0xc0000000/268435456, 0xfd8f0000/65536, 0xfd700000/1048576, I/O @ 0x00008800/256
[ 172.992] (II) Open ACPI successful (/var/run/acpid.socket)
[ 172.992] (II) LoadModule: "extmod"
[ 172.993] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 172.993] (II) Module extmod: vendor="X.Org Foundation"
[ 172.993] compiled for 1.11.1, module version = 1.0.0
[ 172.993] Module class: X.Org Server Extension
[ 172.993] ABI class: X.Org Server Extension, version 6.0
[ 172.993] (II) Loading extension MIT-SCREEN-SAVER
[ 172.993] (II) Loading extension XFree86-VidModeExtension
[ 172.993] (II) Loading extension XFree86-DGA
[ 172.993] (II) Loading extension DPMS
[ 172.993] (II) Loading extension XVideo
[ 172.993] (II) Loading extension XVideo-MotionCompensation
[ 172.993] (II) Loading extension X-Resource
[ 172.993] (II) LoadModule: "dbe"
[ 172.993] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 172.993] (II) Module dbe: vendor="X.Org Foundation"
[ 172.993] compiled for 1.11.1, module version = 1.0.0
[ 172.993] Module class: X.Org Server Extension
[ 172.993] ABI class: X.Org Server Extension, version 6.0
[ 172.994] (II) Loading extension DOUBLE-BUFFER
[ 172.994] (II) LoadModule: "glx"
[ 172.994] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 172.994] (II) Module glx: vendor="X.Org Foundation"
[ 172.994] compiled for 1.11.1, module version = 1.0.0
[ 172.994] ABI class: X.Org Server Extension, version 6.0
[ 172.994] (==) AIGLX enabled
[ 172.994] (II) Loading extension GLX
[ 172.994] (II) LoadModule: "record"
[ 172.994] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 172.994] (II) Module record: vendor="X.Org Foundation"
[ 172.994] compiled for 1.11.1, module version = 1.13.0
[ 172.994] Module class: X.Org Server Extension
[ 172.994] ABI class: X.Org Server Extension, version 6.0
[ 172.994] (II) Loading extension RECORD
[ 172.994] (II) LoadModule: "dri"
[ 172.994] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 172.995] (II) Module dri: vendor="X.Org Foundation"
[ 172.995] compiled for 1.11.1, module version = 1.0.0
[ 172.995] ABI class: X.Org Server Extension, version 6.0
[ 172.995] (II) Loading extension XFree86-DRI
[ 172.995] (II) LoadModule: "dri2"
[ 172.995] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 172.995] (II) Module dri2: vendor="X.Org Foundation"
[ 172.995] compiled for 1.11.1, module version = 1.2.0
[ 172.995] ABI class: X.Org Server Extension, version 6.0
[ 172.995] (II) Loading extension DRI2
[ 172.995] (==) Matched ati as autoconfigured driver 0
[ 172.995] (==) Matched vesa as autoconfigured driver 1
[ 172.995] (==) Matched fbdev as autoconfigured driver 2
[ 172.995] (==) Assigned the driver to the xf86ConfigLayout
[ 172.995] (II) LoadModule: "ati"
[ 172.995] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 172.995] (II) Module ati: vendor="X.Org Foundation"
[ 172.995] compiled for 1.11.0, module version = 6.14.2
[ 172.995] Module class: X.Org Video Driver
[ 172.995] ABI class: X.Org Video Driver, version 11.0
[ 172.995] (II) LoadModule: "radeon"
[ 172.996] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 172.996] (II) Module radeon: vendor="X.Org Foundation"
[ 172.996] compiled for 1.11.0, module version = 6.14.2
[ 172.996] Module class: X.Org Video Driver
[ 172.996] ABI class: X.Org Video Driver, version 11.0
[ 172.996] (II) LoadModule: "vesa"
[ 172.996] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 172.996] (II) Module vesa: vendor="X.Org Foundation"
[ 172.996] compiled for 1.10.99.902, module version = 2.3.0
[ 172.996] Module class: X.Org Video Driver
[ 172.996] ABI class: X.Org Video Driver, version 11.0
[ 172.996] (II) LoadModule: "fbdev"
[ 172.997] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 172.997] (II) Module fbdev: vendor="X.Org Foundation"
[ 172.997] compiled for 1.10.99.902, module version = 0.4.2
[ 172.997] ABI class: X.Org Video Driver, version 11.0
[ 172.997] (II) RADEON: Driver for ATI Radeon chipsets:
********************LOTS OF VIDEO CARDS*******************************
[ 173.004] (II) VESA: driver for VESA chipsets: vesa
[ 173.004] (II) FBDEV: driver for framebuffer: fbdev
[ 173.004] (++) using VT number 8
[ 173.015] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 173.015] (II) [KMS] Kernel modesetting enabled.
[ 173.015] (WW) Falling back to old probe method for vesa
[ 173.015] (WW) Falling back to old probe method for fbdev
[ 173.015] (II) Loading sub module "fbdevhw"
[ 173.015] (II) LoadModule: "fbdevhw"
[ 173.016] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 173.016] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 173.016] compiled for 1.11.1, module version = 0.0.2
[ 173.016] ABI class: X.Org Video Driver, version 11.0
[ 173.016] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 173.016] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 173.016] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 173.016] (==) RADEON(0): Default visual is TrueColor
[ 173.016] (==) RADEON(0): RGB weight 888
[ 173.016] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 173.016] (--) RADEON(0): Chipset: "ATI Radeon X1200" (ChipID = 0x791f)
[ 173.016] (II) RADEON(0): PCI card detected
[ 173.016] drmOpenDevice: node name is /dev/dri/card0
[ 173.016] drmOpenDevice: open result is 9, (OK)
[ 173.016] drmOpenByBusid: Searching for BusID pci:0000:01:05.0
[ 173.016] drmOpenDevice: node name is /dev/dri/card0
[ 173.016] drmOpenDevice: open result is 9, (OK)
[ 173.016] drmOpenByBusid: drmOpenMinor returns 9
[ 173.016] drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
[ 173.017] (II) Loading sub module "exa"
[ 173.017] (II) LoadModule: "exa"
[ 173.017] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 173.017] (II) Module exa: vendor="X.Org Foundation"
[ 173.017] compiled for 1.11.1, module version = 2.5.0
[ 173.017] ABI class: X.Org Video Driver, version 11.0
[ 173.017] (II) RADEON(0): KMS Color Tiling: enabled
[ 173.017] (II) RADEON(0): KMS Pageflipping: enabled
[ 173.017] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 173.190] (II) RADEON(0): Output VGA-0 has no monitor section
[ 173.190] (II) RADEON(0): Output LVDS has no monitor section
[ 173.356] (II) RADEON(0): EDID for output VGA-0
[ 173.356] (II) RADEON(0): EDID for output LVDS
[ 173.356] (II) RADEON(0): Manufacturer: AUO Model: 8174 Serial#: 0
[ 173.356] (II) RADEON(0): Year: 2006 Week: 1
[ 173.356] (II) RADEON(0): EDID Version: 1.3
[ 173.356] (II) RADEON(0): Digital Display Input
[ 173.356] (II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 173.357] (II) RADEON(0): Gamma: 2.20
[ 173.357] (II) RADEON(0): No DPMS capabilities specified
[ 173.357] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 173.357] (II) RADEON(0): First detailed timing is preferred mode
[ 173.357] (II) RADEON(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
[ 173.357] (II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
[ 173.357] (II) RADEON(0): Manufacturer's mask: 0
[ 173.357] (II) RADEON(0): Supported detailed timing:
[ 173.357] (II) RADEON(0): clock: 71.1 MHz Image Size: 331 x 207 mm
[ 173.357] (II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
[ 173.357] (II) RADEON(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0
[ 173.357] (II) RADEON(0): Unknown vendor-specific block f
[ 173.357] (II) RADEON(0): AUO
[ 173.357] (II) RADEON(0): B154EW08 V1
[ 173.357] (II) RADEON(0): EDID (in hex):
[ 173.357] (II) RADEON(0): 00ffffffffffff0006af748100000000
[ 173.357] (II) RADEON(0): 01100103802115780a1cf59758508e27
[ 173.357] (II) RADEON(0): 27505400000001010101010101010101
[ 173.357] (II) RADEON(0): 010101010101c71b00a0502017303020
[ 173.357] (II) RADEON(0): 36004bcf100000180000000f00000000
[ 173.357] (II) RADEON(0): 00000000000000000020000000fe0041
[ 173.357] (II) RADEON(0): 554f0a202020202020202020000000fe
[ 173.357] (II) RADEON(0): 004231353445573038205631200a0043
[ 173.357] (II) RADEON(0): Printing probed modes for output LVDS
[ 173.357] (II) RADEON(0): Modeline "1280x800"x60.0 71.11 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz)
[ 173.357] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
[ 173.357] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 173.357] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 173.357] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 173.357] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
[ 173.357] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
[ 173.357] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 173.357] (II) RADEON(0): Output VGA-0 disconnected
[ 173.357] (II) RADEON(0): Output LVDS connected
[ 173.357] (II) RADEON(0): Using exact sizes for initial modes
[ 173.357] (II) RADEON(0): Output LVDS using initial mode 1280x800
[ 173.357] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 173.357] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:fbd8000
[ 173.357] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 173.357] (==) RADEON(0): DPI set to (96, 96)
[ 173.357] (II) Loading sub module "fb"
[ 173.357] (II) LoadModule: "fb"
[ 173.358] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 173.358] (II) Module fb: vendor="X.Org Foundation"
[ 173.358] compiled for 1.11.1, module version = 1.0.0
[ 173.358] ABI class: X.Org ANSI C Emulation, version 0.4
[ 173.358] (II) Loading sub module "ramdac"
[ 173.358] (II) LoadModule: "ramdac"
[ 173.358] (II) Module "ramdac" already built-in
[ 173.358] (II) UnloadModule: "vesa"
[ 173.358] (II) Unloading vesa
[ 173.358] (II) UnloadModule: "fbdev"
[ 173.358] (II) Unloading fbdev
[ 173.358] (II) UnloadModule: "fbdevhw"
[ 173.358] (II) Unloading fbdevhw
[ 173.358] (--) Depth 24 pixmap format is 32 bpp
[ 173.358] (II) RADEON(0): [DRI2] Setup complete
[ 173.358] (II) RADEON(0): [DRI2] DRI driver: r300
[ 173.359] (II) RADEON(0): Front buffer size: 4000K
[ 173.359] (II) RADEON(0): VRAM usage limit set to 228499K
[ 173.359] (==) RADEON(0): Backing store disabled
[ 173.359] (II) RADEON(0): Direct rendering enabled
[ 173.359] (II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
[ 173.359] (II) RADEON(0): Setting EXA maxPitchBytes
[ 173.359] (II) EXA(0): Driver allocated offscreen pixmaps
[ 173.359] (II) EXA(0): Driver registered support for the following operations:
[ 173.359] (II) Solid
[ 173.359] (II) Copy
[ 173.359] (II) Composite (RENDER acceleration)
[ 173.359] (II) UploadToScreen
[ 173.359] (II) DownloadFromScreen
[ 173.359] (II) RADEON(0): Acceleration enabled
[ 173.359] (==) RADEON(0): DPMS enabled
[ 173.359] (==) RADEON(0): Silken mouse enabled
[ 173.359] (II) RADEON(0): Set up textured video
[ 173.359] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 173.359] (--) RandR disabled
[ 173.359] (II) Initializing built-in extension Generic Event Extension
[ 173.359] (II) Initializing built-in extension SHAPE
[ 173.360] (II) Initializing built-in extension MIT-SHM
[ 173.360] (II) Initializing built-in extension XInputExtension
[ 173.360] (II) Initializing built-in extension XTEST
[ 173.360] (II) Initializing built-in extension BIG-REQUESTS
[ 173.360] (II) Initializing built-in extension SYNC
[ 173.360] (II) Initializing built-in extension XKEYBOARD
[ 173.360] (II) Initializing built-in extension XC-MISC
[ 173.360] (II) Initializing built-in extension SECURITY
[ 173.360] (II) Initializing built-in extension XINERAMA
[ 173.360] (II) Initializing built-in extension XFIXES
[ 173.360] (II) Initializing built-in extension RENDER
[ 173.360] (II) Initializing built-in extension RANDR
[ 173.360] (II) Initializing built-in extension COMPOSITE
[ 173.360] (II) Initializing built-in extension DAMAGE
[ 173.378] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 173.378] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 173.378] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 173.378] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 173.378] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 173.379] (II) AIGLX: Loaded and initialized r300
[ 173.379] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 173.380] (II) RADEON(0): Setting screen physical size to 338 x 211
[ 173.458] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 173.458] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 173.458] (II) LoadModule: "evdev"
[ 173.458] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 173.459] (II) Module evdev: vendor="X.Org Foundation"
[ 173.459] compiled for 1.10.99.902, module version = 2.6.0
[ 173.459] Module class: X.Org XInput Driver
[ 173.459] ABI class: X.Org XInput driver, version 13.0
[ 173.459] (II) Using input driver 'evdev' for 'Power Button'
[ 173.459] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 173.459] (**) Power Button: always reports core events
[ 173.459] (**) Power Button: Device: "/dev/input/event4"
[ 173.459] (--) Power Button: Found keys
[ 173.459] (II) Power Button: Configuring as keyboard
[ 173.459] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 173.459] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 173.459] (**) Option "xkb_rules" "evdev"
[ 173.459] (**) Option "xkb_model" "evdev"
[ 173.459] (**) Option "xkb_layout" "us"
[ 173.497] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 173.497] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 173.497] (II) Using input driver 'evdev' for 'Video Bus'
[ 173.497] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 173.497] (**) Video Bus: always reports core events
[ 173.497] (**) Video Bus: Device: "/dev/input/event5"
[ 173.497] (--) Video Bus: Found keys
[ 173.497] (II) Video Bus: Configuring as keyboard
[ 173.497] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:02/LNXVIDEO:00/input/input5/event5"
[ 173.497] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 173.497] (**) Option "xkb_rules" "evdev"
[ 173.497] (**) Option "xkb_model" "evdev"
[ 173.497] (**) Option "xkb_layout" "us"
[ 173.498] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 173.498] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 173.498] (II) Using input driver 'evdev' for 'Power Button'
[ 173.498] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 173.498] (**) Power Button: always reports core events
[ 173.498] (**) Power Button: Device: "/dev/input/event1"
[ 173.498] (--) Power Button: Found keys
[ 173.498] (II) Power Button: Configuring as keyboard
[ 173.498] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 173.498] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 173.498] (**) Option "xkb_rules" "evdev"
[ 173.498] (**) Option "xkb_model" "evdev"
[ 173.498] (**) Option "xkb_layout" "us"
[ 173.499] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 173.499] (II) No input driver/identifier specified (ignoring)
[ 173.499] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 173.499] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 173.499] (II) Using input driver 'evdev' for 'Sleep Button'
[ 173.499] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 173.499] (**) Sleep Button: always reports core events
[ 173.500] (**) Sleep Button: Device: "/dev/input/event2"
[ 173.500] (--) Sleep Button: Found keys
[ 173.500] (II) Sleep Button: Configuring as keyboard
[ 173.500] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 173.500] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 173.500] (**) Option "xkb_rules" "evdev"
[ 173.500] (**) Option "xkb_model" "evdev"
[ 173.500] (**) Option "xkb_layout" "us"
[ 173.501] (II) config/udev: Adding input device CNF7050 (/dev/input/event10)
[ 173.501] (**) CNF7050: Applying InputClass "evdev keyboard catchall"
[ 173.501] (II) Using input driver 'evdev' for 'CNF7050'
[ 173.501] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 173.501] (**) CNF7050: always reports core events
[ 173.501] (**) CNF7050: Device: "/dev/input/event10"
[ 173.501] (--) CNF7050: Found keys
[ 173.501] (II) CNF7050: Configuring as keyboard
[ 173.501] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.5/usb1/1-7/1-7:1.0/input/input10/event10"
[ 173.501] (II) XINPUT: Adding extended input device "CNF7050" (type: KEYBOARD, id 10)
[ 173.501] (**) Option "xkb_rules" "evdev"
[ 173.501] (**) Option "xkb_model" "evdev"
[ 173.501] (**) Option "xkb_layout" "us"
[ 173.502] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 173.502] (II) No input driver/identifier specified (ignoring)
[ 173.502] (II) config/udev: Adding input device Asus Laptop extra buttons (/dev/input/event6)
[ 173.502] (**) Asus Laptop extra buttons: Applying InputClass "evdev keyboard catchall"
[ 173.502] (II) Using input driver 'evdev' for 'Asus Laptop extra buttons'
[ 173.502] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 173.502] (**) Asus Laptop extra buttons: always reports core events
[ 173.502] (**) Asus Laptop extra buttons: Device: "/dev/input/event6"
[ 173.502] (--) Asus Laptop extra buttons: Found keys
[ 173.502] (II) Asus Laptop extra buttons: Configuring as keyboard
[ 173.502] (**) Option "config_info" "udev:/sys/devices/platform/asus_laptop/input/input6/event6"
[ 173.502] (II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD, id 11)
[ 173.502] (**) Option "xkb_rules" "evdev"
[ 173.502] (**) Option "xkb_model" "evdev"
[ 173.502] (**) Option "xkb_layout" "us"
[ 173.503] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 173.503] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 173.503] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 173.503] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 173.503] (**) AT Translated Set 2 keyboard: always reports core events
[ 173.503] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 173.503] (--) AT Translated Set 2 keyboard: Found keys
[ 173.503] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 173.503] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 173.503] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 173.503] (**) Option "xkb_rules" "evdev"
[ 173.503] (**) Option "xkb_model" "evdev"
[ 173.504] (**) Option "xkb_layout" "us"
[ 173.504] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[ 173.504] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 173.504] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 173.504] (II) LoadModule: "synaptics"
[ 173.505] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 173.505] (II) Module synaptics: vendor="X.Org Foundation"
[ 173.505] compiled for 1.11.0, module version = 1.5.0
[ 173.505] Module class: X.Org XInput Driver
[ 173.505] ABI class: X.Org XInput driver, version 13.0
[ 173.505] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 173.505] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 173.505] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 173.505] (**) Option "Device" "/dev/input/event9"
[ 173.716] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 173.716] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 173.716] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 173.716] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[ 173.716] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right
[ 173.716] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 173.716] (**) Option "TapButton1" "1"
[ 173.716] (**) Option "TapButton2" "2"
[ 173.716] (**) Option "TapButton3" "3"
[ 173.823] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 173.823] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 173.930] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input9/event9"
[ 173.930] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 173.930] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 173.930] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 173.930] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[ 173.930] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 173.930] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 173.930] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 173.930] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 173.930] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 173.930] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 173.930] (II) No input driver/identifier specified (ignoring)
[ 173.931] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 173.931] (II) No input driver/identifier specified (ignoring)
[ 180.276] (II) RADEON(0): EDID vendor "AUO", prod id 33140
[ 180.276] (II) RADEON(0): Printing DDC gathered Modelines:
[ 180.276] (II) RADEON(0): Modeline "1280x800"x0.0 71.11 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz)
[ 183.590] (II) RADEON(0): EDID vendor "AUO", prod id 33140
[ 183.590] (II) RADEON(0): Printing DDC gathered Modelines:
[ 183.590] (II) RADEON(0): Modeline "1280x800"x0.0 71.11 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz)
I deteled the part where it lists all the suported video cards...
Thanks in advance.
Last edited by Hyugga (2011-10-20 06:46:11)

Same problem here
Worked like a charm before.
/etc/X11/xorg.conf
# NOXORGCONFEXISTED: No X.org configuration file existed when this backup was created.
/etc/X11/xorg.conf.d/10-evdev.conf
# Catch-all evdev loader for udev-based systems
# We don't simply match on any device since that also adds accelerometers
# and other devices that we don't really want to use. The list below
# matches everything but joysticks.
Section "InputClass"
Identifier "evdev pointer catchall"
MatchIsPointer "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputClass"
Identifier "evdev touchpad catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev tablet catchall"
MatchIsTablet "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchscreen catchall"
MatchIsTouchscreen "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
/etc/X11/xorg.conf.d/10-synaptics.conf
Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
EndSection
Xorg log
[ 90.424] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 90.424] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 90.424] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 90.424] (II) LoadModule: "synaptics"
[ 90.424] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 90.424] (II) Module synaptics: vendor="X.Org Foundation"
[ 90.424] compiled for 1.11.0, module version = 1.5.0
[ 90.424] Module class: X.Org XInput Driver
[ 90.424] ABI class: X.Org XInput driver, version 13.0
[ 90.424] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 90.424] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 90.424] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 90.424] (**) Option "Device" "/dev/input/event6"
[ 90.500] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5598
[ 90.500] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4670
[ 90.500] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 90.500] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[ 90.500] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right
[ 90.500] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 90.500] (**) Option "TapButton1" "1"
[ 90.500] (**) Option "TapButton2" "2"
[ 90.500] (**) Option "TapButton3" "3"
[ 90.532] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 90.532] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 90.564] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
[ 90.564] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 90.564] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 90.564] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 90.564] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.038
[ 90.564] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 90.564] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 90.564] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 90.564] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 90.564] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 90.564] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 90.564] (II) No input driver/identifier specified (ignoring)
Last edited by akurei (2011-10-14 10:28:45)

Two finger scrolling quit working on Windows 7 Boot Camp.

My two finger scrolling just quit working while running Windows 7 on Boot Camp. Any ideas?

Mr Tech,
I did insert my Mac OS X Snow Leopard DVD once I was in Windows 7 and installed the boot camp thing, which installed all of the drivers

Two finger scroll no longer working in windows 7 HP Pavillian 15t- n200

Hello! My two finger scroll on the touchpad is no longer working! I have run the BIOS again and disconnected battery with power off for 60 sec but still not working. Please help! Thank you so much

Hi eg1978
Welcome to the HP Forums! I see that you are having issues with your two finger scrolling. I have a couple of things for you to try. This HP document Using and Configuring the TouchPad has a section on Turning individual gestures off and on and make sure that the two finger scrolling is enabled. If that does work then reinstall your Synaptics TouchPad Driver.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Windows 7: No two finger scrolling

Fresh install of Windows 7 on a boot camp partition. Installed the drivers off of a snow leopard cd.
Right click works, two finger scrolling doesn't.
In device manager, the "Apple Trackpad" driver is dated 3/09.
Any ideas?

The Windows Support software is installed from within Windows not while making a bootable usb. You start Windows and the Windows Support software should start automatically from the usb and be installed. If for some reason it does not install, from Windows navigate to the Windows Support software and double click the setup.exe file.

Why doesn't two-finger scrolling work for me with Yosemite?

MacBook Pro from 2010, upgraded to Yosemite and now none of my two-finger scrolling works with the Trackpad. Doesn't work on any application - Chrome, Safari, Word, anything. It's super annoying. Tried messing around with Trackpad options in system preferences, didn't help.

Hi thekidcanada,
Welcome to the Apple Support Communities!
I understand that this type of situation can be very frustrating. One troubleshooting step I would recommend would be to reset the PRAM on your computer. I know the article is written for Mavericks but the steps will be the same for Yosemite.
OS X Mavericks: Reset your computer’s PRAM
Cheers,
Joe

T440s Win 8.1 Remote Desktop two finger scrolling

Two finger touchpad scrolling in Chrome desktop mode has been pretty bad on my T440s until the recent driver update. But after the update, I've noticed now that in the tiles version of remote desktop, two finger scrolling no longer works. It acts as a right mouse click and hold to select text or drag. In the desktop version of remote desktop on windows 8.1, two finger scrolling works fine.
I saw an article about editing the Synaptics config file to get two figure scrolling to work in the desktop version by adding a lince that references mstsc.exe, but that line is already in my Synaptics config file. Not sure how to get Synaptics to pass gestures when using the tiles/metro version of RDP.
Any ideas?

Well, I've confirmed it. This is a Synaptics driver issue. I went back to a 16.X version and the scrolling within windows 8.1 tiles version of remote desktop works.
But, I can see what Synaptics did between these two drivers. In the latest version of the driver, two finger scrolling is now handled like trackpoint scrolling now. With trackpoint, if you hold the center button down and mobe the trackpoint vertically, a vertical scroll icon appears and scrolling works well in windows 8.1 and within a remote desktop session in using the tiles version. The vertical scroll icon appears in both cases. And when you do two figure scrolling in the desktop, the vertical scroll icon appears, but when you go to a remote desktop session (tiles version), two finger scroll does NOT work, no vertical scroll icon appears. In the remote desktop session, the two finger scroll is treated like a right click and drag. This is horrible because if you try to two finger scroll in an explorer window, you can accidentally move files or folders into other folders!!!! FRUSTRATING and dangerous!
In the desktop version of remote desktop, this is not an issue, when two finger scrolling happens, the vertical scroll icon does appear and scrolling works!
In the old version of driver, the two finger scrolling must be handled independently of the way trackpoint scrolls... there is never a vertical scroll icon but scrolling always works, albeit herky jerky and buggy in some programs. In the new version of driver, the bugginess is now fixed, except this new two finger scrolling issue has been introduced.
I think the suggestion about modifying the Synaptic tp4table.dat file is a good one except that I can't seem to add a windows 8.1 tiles app to this file... have no idea how to do that as the tiles apps are OS protected and are not exactly .exes. UGH! Ideas about this??
Just got off a horrible telephone support session trying to report this... tech kept asking me about my boot issues... I don't have boot issues! I don't expect any help to come soon... I guess I hope someone at Lenovo or Synaptic actually reads this stuff!
Please Synaptic... this should be a simple, quick fix.

Two finger scroll problem in Preview

When viewing a pdf with over 200 pages in Preview, for example a pdf book, two fringer scroll stops functioning periodically. In order to get it working again you have to click on the destop and then click back onto preview to get two finger scroll to work agian. Is this a limitation of the Preview app? This does not seem to be a problem with smaller pdfs.

You aren't the only one having this problem.
https://discussions.apple.com/message/23600267#23600267
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

Two-finger scroll doesn't work in the "comments list" in Adobe Reader

Adobe Reader XI version 11.0.07, Mac 10.9.3
Two-finger scroll works great in the main pane. However it doesn't work in the comments list area (View -> Comments -> Annotations).
Dealing with 500+ annotations that I have to approve. Not being able to scroll through them easily is frustrating.
Any suggestions?
Thanks!
Tom

https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
On Sun, Jun 8, 2014 at 12:30 PM, YesThatTom <[email protected]>

Two finger scroll doesn't function in mail

Hi,
two finger scroll , using trackpad, doesn't function anymore.
Mavericks was installed some weeks ago.
Also, trackpad gestures: three finger and four finger swipes do not function.
all options are swichted on in preferences. now what?
help will be appreciated.
jw

https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
On Sun, Jun 8, 2014 at 12:30 PM, YesThatTom <[email protected]>

Photo Booth and Two Finger Scrolling

Is there anyway to install Photo Booth or the Two Finger Scrolling features on a 12" PowerBook? Just Wondering.
Thanks,
Shane Eliason

I think there may be some specifics here as to what 12" Powerbook we are talking about. If it's an older model, the preference setting is not available, however all may not be lost. See this link.
http://www.babilim.co.uk/blog/2005/02/two-finger-scroll-on-older-macs.html

Can I stop two-finger scroll from stopping playback in 3?

Does anyone know if it's possible for Soundtrack 3 NOT to stop playback whenever a two-finger scroll occurs, no matter how miniscule?
I'm afraid my habit of editing, developed under Soundtrack 2, involves almost constant two-finger scrolling. Making matters worse, I'm still adjusting to the no-button track pad on my new MacBook Pro, so I sometime leave my thumb where the button was on my old machine. Even a little move that doesn't even reposition the window stops playback. I actually thought that playback was randomly stopping, so I restarted twice before I realized what was happening.

Same problem here.
Also, when horizontal scrolling with two fingers, the slightest inclination of the gesture up or down starts zooming in or out while moving. SInce zoom centers on the playhead, it keeps jumping back there at the same time. Very frustrating.
It is so bad that the interface feels better when I set scroll wheel to "Scrolls window content" in prefs. The drawback is that this makes my USB mouse's conventional scroll wheel do nothing, unless I am holding shift for horiz. scroll. And it still does not solve the problem that playback stops on any 2-finger scroll, even in the now disabled up-down direction.

T430s two finger scroll

Similar Messages

Maybe you are looking for