T440 Automatically defaults to Projector Only when docked

We have a fleet of T440 of which quite a few are displaying an issue that when they are docked the output automatically switches to the projector display only. To get the duplicate display the user has to power up the projector to show the screen  and then hit F7 after logging in

99% chance you don't have the phone number in your contacts correctly.   Make sure there is an area code, etc.

Similar Messages

  • 5g ipod nano 8GB no sound through ear buds or headphone jack only when docked.

    5g ipod nano 8GB no sound through ear buds or headphone jack only when docked. any suggestions? i don't want to replace any of the parts inside if at all possible.
    I have a 5th generation 8GB iPod nano. I bout it off of eBay in May of 2010 and it has worked great until now (Apr 2011). The 5th gen plays music through the headphone jack even when no ear buds are plugged in. I was using it one day and it just stopped. I tried resetting it manually and automatically and I tried reinstalling iTunes. Nothing has worked. Now it won't even play sound though the ear buds (or the aux hook up in my car), only when it is docked to my iHome. Does anyone have any suggestions? I dont want to replace the iPod or any parts inside if at all possible. ANY SUGGESTIONS ARE WELCOMED! THANKS!

    Headphone jacks are only good for so many in and out usages.  Usually its the headphone jack itsefl that goes bad first but sometimes it is the internal part.  If you are lucky you can clean out the inside and get it to work.
    These devices are not made to last for someone who actually has those headphones around there neck and acually uses there listening devices through out the day plugging it in and out.  This is not in any way an Apple thing, it is a problem with many devices.  The male ends tend to get dirty hanging around then scratch the female end when used.  In fact, using higher end headphones you can really notice even the smallest particles of dust on the male end of plug when used, that is the small popping you might notice when the cord moves.
    Hopefully its a problem on the male side of things. 
    I would recommend a person that wants to use headphones alot to keep a small 2 inch extension plugged into there device that can be replaced when it goes bad inplace of wearing out the original plug.
    Again, this is not an Apple problem alone.

  • Why does iPad 3 4G constantly restart after 8.3 update only when docked with iMac?

    Why does iPad 3 4G constantly restart after 8.3 update only when docked with iMac?

    That question is impossible to answer without more information. What troubleshooting steps have you performed? Did you try using another cable? Did you try using another USB port on the Mac? Did you reboot the Mac and reset the iPad? Have you tired restoring the iPad?
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    Use iTunes to restore your iPhone, iPad, or iPod to factory settings - Apple Support

  • How do I change the website that Firefox automatically defaults to (Yahoo search) when opening a new tab?

    Whenever I open a new tab, the new tab opens to a yahoo search page. It used to open to just a blank tab and changed somehow. I've been unsuccessful at changing it back.

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • W520 - now changes to "projector only" whenever display turns off in power save mode

    I have my W520 in a dock with an external monitor. The display is configured to Extend - the external monitor is primary, and the desktop extends onto the W520 screen. I don't have a screen saver. I turn off the display after 30 minutes of inactivity. Until recently both the laptop and monitor screens would turn off after 30 minutes, and then both resume when I moved the mouse or pressed a key.
    Recently, the system has started changing to "Projector Only" when the display turns off. After resuming from power save mode, only the external monitor activates, and the W520 screen is disabled. I have to use Fn-F6 to switch back to "Extend" to re-activate the laptop screen.
    I have rebooted and re-saved the power plan.
    Why has this happened, and how do I fix it?

    Hi, timg11
    I have a few questions so that I may gain a better grasp of this issue:
    1) What is your machine type and model? You can find this information on the bottom of your machine. It should be in format XXXX-XXX.
    2) What is your operating system?
    3) Does this issue occur is the computer is not in the docking station? (Please try if you haven't already).
    Thanks in advance,
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • Ipod plays when docked but no sound from headset or when not docked

    My Ipod plays only when docked. No sound through headset or when not on docking station

    Try the following to eliminate a software problem:
    - Reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod.
    If still a problem that indicates a hardware problem with the iPod. An appointment at the genius Bar of an Apple store is in order.

  • How do I change the default folder that opens when uploading a file to the internet from my mac? (at the moment it automatically defaults to 'Downloads' folder)

    How do I change the default folder that opens when uploading a file to the internet from my mac? (at the moment it automatically defaults to 'Downloads' folder)
    For example...
    I am on a webiste and wish to upload a photo.
    I click on select file on the website
    Finder opens and defaults to 'Downloads' folder (it happens with all wesbites)
    How do I change this?

    I am on a webiste and wish to upload a photo.
    I click on select file on the website
    You are attempting to download the picture to your computer not uploading photo to the website if I am understanding you correctly.
    To change the download direction, you must do so through your browser's Preferences.  If you are using Safari, hopefully, someone who uses Safari will help you and/or post over in their forums.  I do not use Safari.
    If using Firefox>Preferences>General>Save Files to:

  • Automatic app updates in iOS 8, only when not signed in with Apple ID?

    Just updated to iOS 8, and discovered an odd issue, as follows:
    One of my favorite additions of iOS 7 was the automatic app updates, because I do not have access to the app store. My app store is locked under restrictions, but with automatic updates I had no need for the app store in order to update my existing apps.
    Well, I just updated to iOS 8, and I find that there is only an option for automatic app updates when the app store is open, but as soon as the app store is locked through restrictions, the automatic updates option disappears. And to add to the mystery, the only way to get it back is by SIGNING OUT of my Apple ID. When I do that, the automatic music downloads option disappears, and it is replaced by an option for automatic app updates.
    Is this intentional? Why on Earth is there no option for auto updates when signed in, only when signed out? I can't make any sense of it. Any help would be appreciated.
    Other than that, iOS 8 is awesome so far.

    Just updated to iOS 8, and discovered an odd issue, as follows:
    One of my favorite additions of iOS 7 was the automatic app updates, because I do not have access to the app store. My app store is locked under restrictions, but with automatic updates I had no need for the app store in order to update my existing apps.
    Well, I just updated to iOS 8, and I find that there is only an option for automatic app updates when the app store is open, but as soon as the app store is locked through restrictions, the automatic updates option disappears. And to add to the mystery, the only way to get it back is by SIGNING OUT of my Apple ID. When I do that, the automatic music downloads option disappears, and it is replaced by an option for automatic app updates.
    Is this intentional? Why on Earth is there no option for auto updates when signed in, only when signed out? I can't make any sense of it. Any help would be appreciated.
    Other than that, iOS 8 is awesome so far.

  • Set default value for people picker only when user checks a checkbox (Sharepoint 2010)

    The javescript in below link works for me.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/2b130f64-3db2-484a-9a53-ccbe18d2c5de/set-default-value-for-people-picker-in-list-template-current-user?forum=sharepointgenerallegacy
    However, I'd like to set default user for people picker only when user checks a checkbox. 
    I am new to  development. Could you please help me on this requirement ?
    Thank you very much. 

    Hello,
    Use this link to to validate checkbox value, if true then set the person or group value (i.e. as posted in your link).
    http://geekswithblogs.net/haniamr/archive/2011/03/10/validate-that-a-checkbox-is-checked-using-javascript.aspx
    Hope it could help
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • Start automatically an action only when another action finish

    Hi all,
    first, sorry for my bad English....
    I am an Italian Architect, I use Photoshop actions mostly to manage many big tiff files.
    I try to solve this problem since long time.... but so far I can't..  :-(
    This is my problem: I woul'd like to use some actions in sequence launcing only the first one, and when the first finish the second starts automatically, when the second finish, the third starts automatically, and so on.
    Example
    I have 3 actions and a folder "X" that contain tiff files:
    I launch action "A" that resize, colorize, etc tiffs files in folder "X" and put them in a folder "Y"
    only WHEN action "A" finish........
    action "B" starts and works in folder "Y", grouping logically tiff files in some layerized PSD files and putting them in folder "Z"
    only WHEN action "B" finish........
    action "C" starts and works on PSD files in folder "Z" doing some "save as" at different resolution in some folders (folder "JPG", folder "PDF", etc)
    I hope to explain clearly my problem.
    Thanks a lot
    Emanuela

    Hi Mylenium,
    I will try to call existing actions creating a new one (?), but I tell you that I don't understand your question "Does that not give the same result, just only per individual file?"
    thanks
    Emanuela

  • My iPhones email app is not checking automatically for emails, only when I open it.. How to fix?

    My iPhones email app is not checking automatically for emails, only when I open it.. How to fix?

    Settings > Mail, Contacts, Calendars > Fetch New Data > On
    then scroll down to bottom of that page to check whether you want to fetch email:
    every 15 minutes
    every 30 minutes
    hourly
    manually

  • I have a macbook pro and I want to use my canon digital video camera on yahoo chat.  When I sign on to chat and attempt to use a camera, the system automatically defaults to the built in camera on the notebook.  Can I override that default?

    I have a macbook pro and I want to use my canon firewire digital video camera on yahoo chat.  When I sign on to chat and attempt to use a camera, the system automatically defaults to the built in camera on the notebook.  Can I override that default?

    You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
    Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
    http://roaringapps.com/apps:table
    Far as your Safari problem do these things until it's resolved:
    1: Software Update fully under the Apple menu.
    2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
    https://www.mozilla.org/en-US/plugincheck/
    Flash install instructions/problem resolution here if you need it.
    How to install Flash, fix problems
    3: Install Safari again from Apple's web site
    https://www.apple.com/safari/
    4: Run through this list of fixes, stopping with #16 and report back before doing #17
    Step by Step to fix your Mac

  • How to automate and action only when a specifi event takes place ?

    E.g. I want to have a workflow that launches specific applications only when Network manager detects a conection to the internet. Is that possible

    Never mind

  • Office jet pro 8600 how to default to black ink only when printing from my ipad

    Is there a way to set an option to print black ink only when printing from my Ipad 2?
    When I use the print icon the only option that shows is double page. I would like to be able to print black only.
    I can set that option when printing from my pc....
    This question was solved.
    View Solution.

    Hi,
    Airprint does not support Black ink only printing, however the HP ePrint app allow it.
    Be aware that the option is only available for documents (e.g Office files, PDFs, Web pages and emails) but not for Photo files.
    You may find the steps to get and use the app in the document below:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01616126&cc=us&dlc=en&lc=en&product=4323659&tmp...
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • I'm trying to send a group text but the recipient automatically defaults to send to their email.

    I'm trying to send a group text, but when I type in someones name, it automatically defaults to email.  It doesn't even give me the option to a choose phone number.  It only does with certain contacts.  Also, when a message doesn't go through, usually there is a red try again spot I can click, but when I click it, it only gives me the option to send as an email not text.

    99% chance you don't have the phone number in your contacts correctly.   Make sure there is an area code, etc.

Maybe you are looking for