T440p backlight and hotkeys not working.
I have a brand new T440p 20AN0069US and was under the impression that it had a backlight for the keyboard.
I am also having issues with hotkeys F8-F12. I have installed hotkey integration but have had no change to those keys.
I did have a previous issue of hotkeysF5-F7 not working but installing the Intel Display Driver solved those issues.
Hi Sipesj1,
Welcome to Lenovo Community!
As per the query we understood that you are facing multiple issues on your ThinkPad T440p.
Is the keyboard is having Backlit indication on the space bar, if it is there then the backlit is available and you have to use Fn+Space bar to enable or to disable it.
And regarding the function keys please check if the Lenovo power manager is installed in your system. You can install it through ThinkVantage system update utility.
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!
Similar Messages
-
Qosmio F50 - How do I bring the Fn-Keys and Hotkeys to work on Windows XP?
Hello.
I downgraded my Qosmio F50-137 to XP, found every driver needed for hardware recognition, but am still looking for the Fn-Keys and Hotkeys to work.
I know (or at least think) that I have to install the "Toshiba Hotkey Utility".
But this utility needs the "Toshiba common module" for Windows XP to be installed.
I fond on the web two common modules for Windows XP:
common_modules_2489A
and
common_modules_24895A
The first one says "This software utility does not support this system.Installation will be terminated"
The second one says "TVALZ driver installation has failed"
How can I make the installation work properly? or How can I make the Fn-Keys and Hotkeys work on my F-50 ?
Thank you in advance
CamusenseiOk sorry for not answering the questions but I have to find a webpage to answer a few things...
{quote:title=I said:}I've found the XP drivers of other components for my computer on the Toshiba European driver page {quote}
But I'm not sure it was there, since going there and trying to find the page again drove me to the normal driver page.
I'm asking your help me finding the page where:
- You choose your computer in a column by type and then the next column apperar (on it's right), until you have selected your computer, and a button "choose now" appear.
- When you click this last button, you land in a page where you have more drivers than in the normal driver page of toshiba (for me I had the option of Windows XP, while I don't have it on the normal page)
- I'm preety sure it was on the toshiba-website, but I don't remember how to find this page again... And since I already formatted...
I'll continue looking if I can find it again, if someone knows this page, please tell me/us...
thank you in advance.
{Edit:}
YESSS
Sorry just to edit my message I don't want to double-post.
Please stop searching, this is it :
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp#
if this website can help some people, then it's great. i'm preparing my next message...
{/edit}
Message was edited by: Camusensei (90 minutes later)
{Edit2:}
By the way, I don't find my X300-145 on this website...
Only X305-computers referenced in the X-series, does any know why?
{/edit}
Message was edited by: Camusensei -
Wireless network and bluetooth not working on touchsmart 600
This has not worked since day 1 and I have been using wired internet.
I really need to setup a home network and need to use wireless.
Research on the net has led me to belive I should have HP WIRELESS ASSISTANT on my machine... is that correct?
Everytime I try to download it is seem to be for a notepad... mine is a touchsmart desktop...
Please adviseHi coffee12345,
Welcome to the HP Forums!
I have read your post on your wireless keyboard and mouse not working with your desktop, and I would be happy to help you! To begin, I need to ask you a few introductory questions:
What is the Product and Model Number of your desktop?
What version of Windows are you using?
Is this a recent issue, or has it been like this since day one?
Are you using a USB hub to connect your peripherals or is it directly plugged into the computer?
Please re-post with the necessary information, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
My Ipod is frozen!!! Its a 4th generation and its frozen on an app, Ive tried everything like holding down the lock screen and stuff and its not showing the red thing to slid to shut it down....This is my only thing to use to contact my friends and its not working, i dont have a phone and i cant get one, so this is the onlything i have.....PLEASE HELP!!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
How can I get my itunes onto my new laptop? Do I need to download itunes again or can I just copy it? My ipod classic has since been soaked in water and does not work so I cannot copy from there. Can anyone help?
You should copy everything from your old comptuer to your new one.
-
Keyboard and Trackpad Not Working; Mac OSX Unexpectedly Quit?
Hey everyone... I think I may need to stop by the Apple store to figure this one out, but I just wanted to make sure if there was anything I could do on my own first.
So basically, on my MacBook Pro that I got nearly two years ago (late September of 2006) for the past month and a half has had problems. In the beginning, the mouse and keyboard would freeze up and just not work. Restarting the comp did nothing. Some times were worse than others (once it was frozen for 1.5 hours). Then it stopped, every now and then having a few freezes (sometimes when the keyboard froze but the trackpad was still good), but two days ago I had my comp not hooked up to an adapter. When the battery got low, the comp froze. I went to bed and closed the laptop, and the next day it was still frozen. I unfroze it, but then it happened again (I'm pretty sure the same situation... almost no battery)... and it is still frozen, even after multiple restarts.
Also, during the time when freezes weren't as bad, sometimes the keyboard would get stuck on one key, usually the volume up button (very annoying)... then I was told to restart the comp. When I came back, I was told that Mac OS X had unexpectedly quit.
Sorry that was a lot to read, but any help is really appreciated! Thanks!
Not sure if this is also important, but I did spill some water on the keyboard a very long time ago (late December '06)... it wouldn't take this long for that to cause the problem, would it?Does booting up in [Safe Mode|http://support.apple.com/kb/HT1455?viewlocale=en_US] help at all? This boot mode checks the disk on startup and disables non-apple start up items and certain kernel extensions.
Steve -
while updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?
Disconnect the iPad, do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!, reconnect and follow the prompts.
If that does not work then see here http://support.apple.com/kb/HT1808 -
hi i have a ipod touch 4 generation 64gb and my camera is blocked and dose not work i cant update the ipod either
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
since I upgraded to the new operating system my charger no longer works...
It says"this cable or accessory is not certified and may not work reliably with this iPhone"Try checking your cable socket/lightning cable for dirt, grime, pocket lint, etc. I could not find the solution to this issue myself and after much searching I found someone stating that cleaning this out helped them immensely.
After taking a wooden toothpick (making sure the phone was OFF first) and gently clearing out the edges and inside of the lightning socket this went away.) It is worth noting that I had a significant amount of dust or lint buildup along the edge rails which I think was causing the iphone to believe it was plugged into something when it was not.
Try it and see, ensure you are very careful and do not use any conductive tools to clean the area in question. Compressed air also does wonders here. -
Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.
Maps took me to the completely wrong side of town for a long standing business in town.Hello margmcarlson,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Troubleshooting iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/TS2634
Restore iPhone, iPad, or iPod touch to its factory default state. You should rarely need to use this step with an accessory issue.
Best of luck,
Mario -
my sons ipod classic was left on all day and now has a red circle with a cross in it and will not work - nothing we do will make it work - any ideas??
Try to restore the iPod. Here's an article that provides troubleshooting for it.
http://support.apple.com/kb/TS1463
If that doesn't work visit an Apple Store and see if they can replace it. -
Why does drag and drop not work?
Why does drag and drop not work?
Do you mean that when you move files on the Desktop, they don't stay where you put them ?.
If so - use Finder - View menu - Show View options & choose 'Arrange by' : none
If not - please describe exactly what the problem is. -
Just Upgraded my IPOD 5 to iOS 7.0.2 and it will not charge the battery anymore.
When I plug it in, it now gives the message "This cable or accessory is not certified and may not work reliably with this IPOD".
Anyone else have this issue after they upgraded the iOS system?
Thanks,- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I just got the iPhone 5 and noticed that the message alerts will only alert once . I have it set up as 3 times and its not working . Please help. I'm running 6.0.2 and I really starting to get ****** off with apple products
Instead of getting annoyed, read the User's Guide and try basic troubleshooting.
-
I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?
it allows you to use your cr files, Adobe - Adobe Camera Raw and DNG Converter : For Windows
Camera Raw: How to use Adobe DNG Converter - YouTube
Maybe you are looking for
-
How do I uninstall Mavericks and go back to Mountain Lion
Any ideas? Can't find it on App Store anymore.
-
I have an LG USB card for my laptop. Wondering if there is a way to use it for the IPAD2 without havong a 4G mifi? Thanks.
-
WOW! what do you have to do to get a simple customer support answer?
Error 213:19
-
Hello, I've had some recent freezes (usually during logout from one account to another or shutting down). After a hard reboot, startup is long and external drives will not mount at times. After, switching cables and ports for the external drives (2 f
-
Broken images from SD Card.. Help!
This is a verry strange questions but lately when importing images from my new SD card somethimes some of the images look like they are importing but then one by one they move from the album I specify to the trash can? When I go to the directory on m