T440p camera not working windows 8.1
Hi!
My Lenovo T440p is brand new, and I never used my camera.
I don't see the Integrated Camera in the Device Manager (there is also no Imaging device category). But I have an unknown peripheral on the USB controller list.
Also, I don't see it in the BIOS (maybe I don't check right), but I found an unknown peripheral (number 18).
I tried to install the lastest drivers but this doesn't work.
Thank you!
Solved!
Go to Solution.
Hi Amartin1050,
Welcome to Lenovo Community!
As per the query we understood that you are facing the issue with Camera on your ThinkPad T440p.
Is there any yellow mark showing in device manager?
Have you checked with setting the BIOS to default setting by pressing F9 on BIOS, also check with updating the BIOS?
Please visit the below link to test the camera, take a screen shot if it shows any error.
http://www.testmycam.net/
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!
Similar Messages
-
Integrated camera not working windows 8 X201
I upgraded to Windows 8 some time ago and did not notice that my integrated camera is not recognized, the driver is not listed in the downloads for the laptop but states this is a Windows Inbox Driver. Where can I get the driver AND where in the device manager is it listed. Thanks.
I would not upgrade to Windows 8, lots of issues and the camera still does not work. It does work when I load Linux so its not the camera. I have tried everything, old drivers, new drivers. My wireless doesnt work either, not sure I'd get anothe Lenovo.
-
ThinkPad internal microphone not working - Windows 8.1
Hello everyone,
I'm back on this forum because I had another issue... See my first one : http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T440p-camera-not-working-windows-8-1/m-p/18...
There was a problem with the cable between the camera/microphone combo card and the daughter card. Now the camera is working properly. A technician replaced the cable.
But I realized that my internal microphone is not working. I don't remember if it worked once...
My microphone is not muted, and I reinstalled the real-teck drivers. When I try to use the "listen" option in the microphone properties, I here a sort of wideband noise (let's call it white noise).
Do you have any suggestions that might help?
Thank you very much
Moderator edit: Correct version of Windows in thread subjectAnyone ? Thank you !
EDIT : sorry I'm on Windows 8.1 not 7 -
Camera not working on new profile
I have 3 profiles on this same Skype, on one laptop. 1 profile works fine but on second profile camera not working (video not showing), audio works fine. I created a new account (e-mail is same from second profile) and is this same - video not working. I dont understand what is wrong. This same laptop, this same camera, this same drivers/windows7, latest Skype, and from 3 profiles one working fine. Please help!!!
Try to reset all Skype settings.
Quit Skype or use Windows Task Manager to kill any Skype.exe process. Go to Windows Start and in the Search/Run box type %appdata% and then press Enter or click the OK button. The Windows File Explorer will pop up. There locate a folder named “Skype”. Rename this folder to something different, e.g. Skype_old.
Next go to Windows Start and in the Search/Run box type %temp%\skype and then press Enter or click the OK button. Delete the DbTemp folder.
Restart Skype.
N.B. If needed, you will still be able to re-establish your call and chat history. All data is still saved in the Skype_old folder. -
LT2223 ThinkVision Monitor - Inbuilt Web Camera not working
Hi
I am using a LT2223zwC monitor which has a built in Web Camera but does't seems to be working - Skype cannot detect the camera and I have no idea how to get it work. Tried the Lenovo Web Conferencing from Control Panel, it only allows me to adjust the Speaker and Mic.
Any assistance is much appreicated.
Many thanks.
GilarThanks For Information..
But I Am Using Microsoft Lifecam Studio Download Latest Software Microsoft life cam Version 4.25.512.0
This Is Not A Driver Issue This is Application Issue Or Windows 8.1 Issue
I Check 3 Different Camera but Any camera Not Working
I Check 3 Different Pc..
But In Windows 8.1 That Thing Not Work !
But This Thing Working Ok With Windows8
This Is Majjor Issue Of Microsoft Windows8.1
If I Download Other Store App Like Cammix The Software Give Me Hint..
Showing Me Error Like..
"windows.media.capture"media
capture is not registered, (This Error
Is Showing In Cammix Application)
And Microsoft Have To Provide Something To As...
Thank You For Support.... -
Iphone 6 plus front camera not working in whatsapp
iphone 6 plus 64GB iOS 8.1 front camera not working in whatsapp
It seems the facetime camera does not work for whatsapp only it works normally.
-
Iphone 6 plus facetime camera not working after 8.1 upgrade
iphone 6 plus facetime camera not working after ios 8.1 upgrade, also while making calls the voice on the other side sounds distant. Any pointers.
It seems the facetime camera does not work for whatsapp only it works normally.
-
Isight camera not working after the last update
After reboot of the last OS update
Isight camera not working...
i've tried photobooth, ichat, skype and it doesn't show up anywhere. in fact, when i go to system profiler, it doesn't show isight under USB connections at all.
just to give you a recap of what i've tried so far:
* restarting (obviously)
* resetting PRAM/SMC (by booting it the way it was specified in the isight troubleshooting thing)
* just shutting down my computer and taking the battery out for several hours
any Help pls
because i mast to use it as soon as possible in a conference*A few suggestions.........*
Try running repair permissions from your HD and afterwards run +repair disk+ from your software install DVD.
my isight camera is not working-not recognized with photo booth or ichat
To fix your iSight, shut down computer. Reboot in safe mode (press power button and then hold shift key down). After computer boots, restart again. Hopefully, your iSight will start working again. -
HP Mini 110-3700 built-in camera not working
I just bought my HP Mini 110-3700 (LV831PA#UUF) last january. I just tried using the HP camera twice to check if the image it captures is clear. Yesterday, i will use the camera for a video chat but the messenger said "Cannot detech the camera/ device is not connected).When I had clicked the link for the HP Camera it had open but the light indicator didn't have any light and the camera isn't working.
I already tried restoring the HP mini to factory settings but after that, the camera isn't working still. What should I do? Need help ASAP.
Thank you!bamba-ista wrote: built-in camera not working properly. what do i need to do?
How to Troubleshoot iSight (also works with FaceTime and FaceTime HD cameras.) -
My iphone 4 camera not working it opens afters closing 2-3 times before but its can not open now i totaly reset,restore,formet and change software version but still now its not open that is 5-6 month now please tell me what to do now
There is no Apple here, this is a user to user forum. When you said you restored, then you restore as NEW?
If you restored as New and still the problem persiist, then it time to take a trip to the Apple store. -
Camera not working on Lumia 535.
Camera not working lumia535
Moderator's note: The subject was edited. A new thread was created.Hi, sanaayesha. Welcome to Microsoft Mobile Community. We'd love to know more about your concern. When you say camera isn't working, does it mean it's inaccessible, not taking sharp images, etc.? Does this happen to both main and secondary camera? Are you getting this issue regardless of the lens you're using? You can try checking the workarounds given on this link to further isolate the issue: My camera is not working correctly. The content of this link is applicable regardless of your location. Hope to hear from you the soonest.
-
Autofill function is not working, 'window' sticks through it not functional!
autofill function is not working, 'window' sticks through it not functional!
Back up all data, then test after each of the following steps that you haven't already tried. Stop when the problem is resolved.
1. Quit and relaunch Safari.
2. Select your card in Contacts. Then select
Card ▹ Make This My Card
from the menu bar. Also select
Contacts ▹ Preferences ▹ vCard
and uncheck the box marked
Enable private me card
if it's checked.
3. In Safari, select
Safari ▹ Preferences ▹ AutoFill ▹ AutoFill web forms: Using info from my Contacts card
If the box was already checked, uncheck it and then check it again.
4. Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access. -
Camera not work ipad 4generation before ios8 update
Camera not work ipad 4generation before ios8 update
PLease helpHi Hellside,
Welcome to Apple Support Communities.
It sounds like there is an issue with the camera on your iPad. The article linked below has a lot of great troubleshooting suggestions for a similar issue on an iPhone but the suggestions should resolve the issue with your iPad too.
iPhone: Hardware troubleshooting
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
I hope this helps.
-Jason -
my macbook air camera not working
after i updated to 10.8.5
i have downloaded and installed the supplemental also even then my problem not resolvedHashim Jamal wrote:
i have done reinstallation of os maverics
and checked camera according to troubleshoot
still not working what should i do?....
Use the final "Troubleshooting" suggestion:
"... contact Apple or an Apple-Authorized Service Provider for service."
Hashim Jamal wrote:... i took my laptop to a apple authorised service department...
You did the right thing.
Hashim Jamal wrote:... apple authorised service department ... are asking for 750usd to get it replaced
what should i do?
If you like the Mac you have and need the built-in camera, spend the money.
If you want a different computer, now is a good time to trade.
If cost is a concern, consider a Mac compatible external camera. Take your MacBook Air to the store when you shop, and try the external camera you want to be certain that it works before you buy.
Message was edited by: EZ Jim
Mac OSX 10.9 -
MOVED: MSI Live Update not working Windows XP Professional 64bit Edition!!!
This topic has been moved to Operating Systems.
MSI Live Update not working Windows XP Professional 64bit Edition!!!Thank you so much. I just want to say I really appreciate when people do take the time to post me in return. So I really mean it, Thank You.
A quick question. You see, I have been upgrading my computer. I installed a Belkin USB USB Card (high speed 2.0) cause I needed more USB ports. Then I checked for compatable RAM and upgraded my RAM from 512MB to 2Gigs. Everything alright.
Now, I have checked for processors that are compatable with my board K9VGM-V (MS-7253). And MSI's chart says mine is compatable with the AMD Athlon 2x 6000 (3.0Ghz) *IF* I use the 89 watt and not the 125 watt. Here is a good URL for the processor details I found:
http://www.cpu-world.com/CPUs/K8/AMD-Athlon%2064%20X2%206000+%20-%20ADA6000IAA6CZ%20(ADA6000CZBOX).html
Now do you have any tips and I will probably have to flash to BIOS for sure after this upgrade won't I?
Maybe you are looking for
-
Printing bug in Acrobat 9?
I am using Windows XP, with SP3; Acrobat V9 Pro with Creative Suite CS3.3 Design Premium. PDFs that printed fine in V8 will not print in V9-Pro. The files appear on my screen and function normally in every aspect, but upon sending to a network printe
-
When printing in Excel It is always want to use the acrobat X pro trial, which the trial is expired. I do not want to use acrobat X pro trial anymore. How can I reset it and use simple acrobat to print my PDF document?
-
Procedure inserting different number of records in GT table
I have procedure, in the procedure a dynamic query is get created. Then query is open using OPEN for statement into refcusror. Then I'm fetching the data into record type object within a loop..end loop and inserting the records in a GT table. But pro
-
Unable to configure the router.
I bought a router today and I'm having some trouble getting it working. Iinserted the CD and followed the on-screen installation settings including unplugging the modem/router, then plugging it back in, etc. I got to step 11 "Set the Router's Adminis
-
Why I don't have 50i in H264 in Media Encoder CS5.5 ?
In my AME CS5.5, I don't find, in H264, the possibility to code in 50i in HDTV : only in 1080p 24, 25, 29.97. Idem in 720p. I don't know how to obtain these configurations from Adobe site. Is somebody can help me ? Thanks