T440p + Dual external monitors without a dock?

Hi,
Is it possible to use two external monitors with my T440p (20AW-A08500) with Intel HD Graphics withou having to buy a dock? I normally use my laptop at home with the lid shut and two monitors attached.
I used to have X1 (still do - now up for sale) and that was happily connected to two monitors via HDMI and via a MiniDP to DVI adaptor.
I wrongly assume when I bought the T440p that I would be able to somehow power my existing two monitors from the single MiniDP port.
I have seen their is a Lenovo DisplayPort to DualDisplayPort adaptor - but this talks about ThinkCentre usage - no mention of Thinkpads. Plus the price of this adaptor is pretty steep.
Any tips / advice appreciated.
Thanks!
Solved!
Go to Solution.

Just an FYI update:
I bought a Lenovo Pro Dock after reading the specs on the Lenovo website.
However, it turns out you cant connect two digital monitors at the same time.
When it says:
1x DisplayPort 1.2 (Exclusive use with DVI-D)
1x DVI-D (Exclusive use with DisplayPort)
It actually means mutually exclusive with each other - ie only one can be used at one time.
Very disappointed in this - just glad I did not pay the full RRP of £150 - otherwise I would be gutted that Lenovo have knobbled the port in this way.
My current workaround is to just use one monitor on the dock VGA Port. and one into the DVI I could plug one into the laptop MiniDP but then I would just cause wear and tear on the laptop port through the plugging and unplugging. For some reason in my head the MiniDP does not look as solid as say a VGA or DVI port.
The other thing I noted is that despite trying to different adaptors / cables I cannot connect a monitor via its HDMI port to either the DVI or DisplayPort - just causes Windows to crash. I have the latest dock firmware and the latest graphics drivers installed. Luckily the monitor has a DVI port so I use that instead.
Serious, serious limitations on the part on Lenovo. I have a cheap Dell laptop from work and the dock allows me to connect in every possible scenario / adaptor / conversion situation without any issues.
I think Lenovo are seriously looking to lose loyal customers. When we first migrated to Dell equipment (from IBM) at work I was really disappointed as the initial batch of Dell laptops were pretty naff. How times have changed, my current work laptop is a Dell Latitude E6220 and I have to admit is a suprisingly reliable, efficient and usable laptop. The spares and accesories are much cheaper too. I am now considering a Dell as my next home laptop. A year ago this would have been unthinkable and almost considered heresy for this Thinkpad diehard!

Similar Messages

  • New X220 support dual external monitors with mini dock plus?

    Hi,
    I need to purchase a new Lenovo laptop in urgent.
    But we need to make sure it support dual display to two external monitors. (VGA)
    My question is:
    (1) we plan to purchase with mini dock plus, it have two HDMI port.
    can it support two external monitors for Intel HD Graphics 3000?
    ( we will close the Lids when use in dual external monitors)
    (2) Can i use DVI to VGA convertor convert to VGA for supporting two external monitors
    (3) what is the weight difference for X220 SATA HDD and SSD HDD?
    Please kindly help in urgent!
    Rgds,
    Sun
    Solved!
    Go to Solution.

    Hi
    Yes, it work.
    It must need a Display port to VGA (F) convertor.
    Thank you.
    Cheers
    Sun

  • T510 dual external monitors without docking station

    Hi, didn't find this one in google or at this forum...
    can I connect 2 external monitors with resolution 1600X900 to t510 without any docking station? (one to the VGA and the other to the HDMI port). do I need the Nvidia m3100 or some other graphic card to support this? or the internal intel cpu graphic card can handle this? 
    same question above about 3 external monitors...

    I've got a T510 with the Optimus graphics (4313CTO), one monitor connected to VGA, the other connected to the DisplayPort.  According to this: http://www-307.ibm.com/pc/support/site.wss/MIGR-76​617.html, 
    I should be able to connect two external monitors, but it only allows on active external monitor at-a-time.  Is that support site inaccurate?  I would assume having to video cards would allow two external monitors, but this seems to be an issue for this laptop.
    Best Regards,
    Mike

  • T43 w/ Port Rep II - Dual External Monitor Setup

    Hi,
    I have a T43 with the ATI chipset.  I am running it in a dual monitor configuration with the laptop LCD and an external monitor connected to the docking station.  I would like to use 2 external monitors via the docking station's VGA and DVI connectors but I can't figure out how to get the system to switch from the laptop LCD to the DVI.  Is this possible?  If so, how do I do it?
    I'm running XP.
    Much thanks for any help!
    Fred
    Solved!
    Go to Solution.

    go into your bios, select vga+dvi+internal screen. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Dual External Monitors with 15" MacBook Pro (Late 2011)

    I'm looking for suggestions for using dual external monitors with new MacBook Pro's.  The company I work for has started to puchase these for certain employees and we are looking for any good suggestions.
    It appears that the display/thunderbolt port should be able to support many devices but I have not seen any way to hook up multiple displays.  The idea is that these employees would be working with the macbook pro screen closed while in the office and use dual displays.  The only option that I can find is to use a usb device to output video to a second display.  I don't really like that because my experience with these devices is that they usally present a display lag and I know our graphic designers would never go for that.
    One employee suggested that he use the VGA adapter and then get a VGA splitter.  I'm not exacty certain that would work though. Wouldn't that just mirror the display on two screens instead of allowing an extended desktop?  Also it looks like expensive Apple displays have ports so that you can daisy chain thunderbolt devices out of those monitors but this company will not go for the cost of those displays.
    Am I missing anything?  Any suggestions would be helpful.
    Thanks!

    Look into the Matrox Dualhead2Go DP Edition. If it works with Thunderbolt Macs, it will support two identical 1920 x 1080 DVI monitors as one extended desktop. Verify with Matrox that it is Thunderbolt-compatible and will suit your purposes before ordering.

  • Dual external monitor setup?

    I'd like to use dual external monitors, ideally also plus the laptop screen for a total of 3 monitors, with my new 5th gen 17" MBP. I hear that USB-to-DVI options out there due have very poor poor refresh rates and picture quality. I'd like to use the ViDock2 expresscard/34 setup, which is a full fledged external video card, http://www.villagetronic.com/vidock2/index.html, but I understand it only works with MBP gens 1-4. Anybody know any other multi-monitor solutions that work with gen 5, other than poor quality USB options? Anybody know why the ViDock2 doesn't work with the MBP 5th gen?

    Check out the Matrox dual head and triple head units, marc.
    http://www.matrox.com/graphics/en/products/gxm/
    My suspicion is that you will need the more expensive "DP" versions to operate effectively with the new model.
    Cheers
    Rod

  • Thinkpad T420 with Dock 4338 Dual External Monitors won't work

    Hey Everyone,
          I recently purchased a T420 with Dock Model 4338 and am trying to connect two external monitors.  I want to have my desktop visible on my primary monitor with laptop closed and that desktop extended onto my second external monitors.  Both external monitors are Dell 19", one is being ran through the VGA port on the dock and the other is a VGA cord that I put a VGA to DVI-D adapter on to run off of one of the DVI Ports on the dock.  I can get my desktop to display on the main external monitor, and everything detects the other monitor fine, but the extended monitor remains black.  The screen is on, and recognized as the button light on the monitor is green not yellow and i can scroll my mouse over to that window and i lose the mouse so it's extending just not visible.  I have made sure that both monitors work by checking each individually in the VGA port and they are operational, but the DVI-D port doesn't seem to work on my second monitor.  
         I have done some pretty extensive searching and can't seem to get this to work.  At my job I have a T430 with the same dock and dual monitor setup that took no time and works great.  Does the T420 just not support this?
    All help is appreciated.
    Thank you all,
    NickG
    Solved!
    Go to Solution.

    DVI-D don't support passive dvi to VGA adapter. You are better off with a displayport to VGA adapter, as they are cheaper then a dvi-d to VGA converter.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • W530 external monitors without dock? TripleHead​2go?

    It looks like the topic of external monitors has been discussed extensively using the minidock. However, I'm  curious as to what can be hooked up without the minidock; DisplayPort seems to have a lot of options in driving muliple monitors and using splitters.
    It looks like the maximum supported resolution of the graphics card (Nvidia Quadro K1000M) is 3840 x 2160. Would I be able to use something like this to drive 4 monitors @ 1920x1080:
    http://www.amazon.com/Xtrempro-DPS14-4-Port-Displa​yPort-splitter/dp/B00HIVUE7I
    Right now I've got a matrox triplehead2go; this will support 3840 x 1024 (3 @ 1280 x 1024). I can sell it if something else will work better. The triplehead2go will only use a little less than half the available resolution, though it'll be over 3 monitors.

    The TripleHead2go is an active device with a separate power connection from one of the USB ports. By default, it tries to drive my 2 OLD monitors at 85Hz which they cannot handle - I have to lower the refresh rate every time I change a setting.
    It seems like in theory, a splitter could split the output into 4 monitors @ 1920 x 1080, though they might behave as a single monitor.
    Ideally, I would want 4 independant monitors @ 1920x1080, driven off the mini displayport, that I could arrange how I wish. I have a feeling if I called Lenovo tech support, they would just try to sell me the lenovo splitter that supports 2 monitors and leave it at that.

  • HP Zbook 15, external monitor connected to docking station issue

    Dear all
    I have bought a HP Zbook 15 laptop and installed Ubuntu 12.04. It does not show anything on the external monitor when I mount the laptop on the docking station. 
    After installing the Ubuntu 12.04 and putting it on the docking station for the first time, I got this problem:
    "If an ACPI driver is available for this device, you should use it instead of the native driver". I have attached the whole log file. Then, I installed the latest Nvidia driver, and restarted the machine. This time, I do not see that error message; however, I cannot see anything on my external monitor which is connected to the docking station. Can you please tell me how to fix this problem?
    Best regards,
    Murtaza
    I did not find a way to attach the log file, so I put it here:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.13.0-32-generic (buildd@phianna) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #57~precise1-Ubuntu SMP Tue Jul 15 03:51:20 UTC 2014 (Ubuntu 3.13.0-32.57~precise1-generic 3.13.11.4)
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-32-generic root=UUID=062ea7e8-5c86-4852-ba25-0372be603607 ro quiet splash vt.handoff=7
    [ 0.000000] KERNEL supported cpus:
    [ 0.000000] Intel GenuineIntel
    [ 0.000000] AMD AuthenticAMD
    [ 0.000000] Centaur CentaurHauls
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000044b7efff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000044b7f000-0x0000000045e7efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000045e7f000-0x0000000045f7efff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x0000000045f7f000-0x0000000045ffefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x0000000045fff000-0x0000000045ffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000046000000-0x000000004f1fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004aedfffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: Hewlett-Packard HP ZBook 15/1909, BIOS L70 Ver. 01.30 12/08/2014
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x4aee00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 00FF800000 mask 7FFF800000 write-protect
    [ 0.000000] 1 base 0000000000 mask 7FC0000000 write-back
    [ 0.000000] 2 base 0040000000 mask 7FFC000000 write-back
    [ 0.000000] 3 base 0044000000 mask 7FFE000000 write-back
    [ 0.000000] 4 base 0046000000 mask 7FFF000000 uncachable
    [ 0.000000] 5 base 0100000000 mask 7F00000000 write-back
    [ 0.000000] 6 base 0200000000 mask 7E00000000 write-back
    [ 0.000000] 7 base 0400000000 mask 7F80000000 write-back
    [ 0.000000] 8 base 0480000000 mask 7FC0000000 write-back
    [ 0.000000] 9 base 04B0000000 mask 7FF0000000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0x46000 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
    [ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
    [ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x4aec00000-0x4aedfffff]
    [ 0.000000] [mem 0x4aec00000-0x4aedfffff] page 2M
    [ 0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x4ac000000-0x4aebfffff]
    [ 0.000000] [mem 0x4ac000000-0x4aebfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x480000000-0x4abffffff]
    [ 0.000000] [mem 0x480000000-0x4abffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x44b7efff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x449fffff] page 2M
    [ 0.000000] [mem 0x44a00000-0x44b7efff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x45fff000-0x45ffffff]
    [ 0.000000] [mem 0x45fff000-0x45ffffff] page 4k
    [ 0.000000] BRK [0x01fe7000, 0x01fe7fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x47fffffff]
    [ 0.000000] [mem 0x100000000-0x47fffffff] page 1G
    [ 0.000000] RAMDISK: [mem 0x35be0000-0x36de7fff]
    [ 0.000000] ACPI: RSDP 00000000000f3060 000024 (v02 HPQOEM)
    [ 0.000000] ACPI: XSDT 0000000045ffe120 0000A4 (v01 HPQOEM SLIC-MPC 00000001 01000013)
    [ 0.000000] ACPI: FACP 0000000045ffc000 00010C (v05 HPQOEM 1909 00000001 HP 00000001)
    [ 0.000000] ACPI: DSDT 0000000045fd1000 0257CC (v02 HPQOEM 1909 00000001 INTL 20110112)
    [ 0.000000] ACPI: FACS 0000000045e31000 000040
    [ 0.000000] ACPI: HPET 0000000045ffb000 000038 (v01 HPQOEM 1909 00000001 HP 00000001)
    [ 0.000000] ACPI: APIC 0000000045ffa000 0000BC (v01 HPQOEM 1909 00000001 HP 00000001)
    [ 0.000000] ACPI: MCFG 0000000045ff9000 00003C (v01 HPQOEM 1909 00000001 HP 00000001)
    [ 0.000000] ACPI: TCPA 0000000045ff7000 000032 (v02 HPQOEM 1909 00000000 HP 00000001)
    [ 0.000000] ACPI: SSDT 0000000045fce000 000466 (v01 HPQOEM SataAhci 00001000 INTL 20110112)
    [ 0.000000] ACPI: SSDT 0000000045fcd000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112)
    [ 0.000000] ACPI: SLIC 0000000045fcc000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
    [ 0.000000] ACPI: FPDT 0000000045fca000 000044 (v01 HPQOEM 1909 00000001 HP 00000001)
    [ 0.000000] ACPI: BGRT 0000000045fc9000 000038 (v00 HPQOEM 1909 00000001 HP 00000001)
    [ 0.000000] ACPI: SSDT 0000000045fc3000 000544 (v01 PmRef Cpu0Ist 00003000 INTL 20110112)
    [ 0.000000] ACPI: SSDT 0000000045fc2000 000AF3 (v01 PmRef CpuPm 00003000 INTL 20110112)
    [ 0.000000] ACPI: SSDT 0000000045fc1000 0001D5 (v01 PmRef LakeTiny 00003000 INTL 20110112)
    [ 0.000000] ACPI: SSDT 0000000045fc0000 000706 (v01 SaSsdt SaSsdt 00003000 INTL 20110112)
    [ 0.000000] ACPI: SSDT 0000000045fbd000 002F11 (v01 HP NVSGTBL 00001000 INTL 20110112)
    [ 0.000000] ACPI: ASF! 0000000045ff8000 0000A5 (v32 HPQOEM 1909 00000001 HP 00000001)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000004aedfffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x4aedfffff]
    [ 0.000000] NODE_DATA [mem 0x4aedf9000-0x4aedfdfff]
    [ 0.000000] [ffffea0000000000-ffffea0012bfffff] PMD -> [ffff88049e600000-ffff8804ae3fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x4aedfffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0x44b7efff]
    [ 0.000000] node 0: [mem 0x45fff000-0x45ffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x4aedfffff]
    [ 0.000000] On node 0 totalpages: 4143388
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 4334 pages used for memmap
    [ 0.000000] DMA32 zone: 277376 pages, LIFO batch:31
    [ 0.000000] Normal zone: 60344 pages used for memmap
    [ 0.000000] Normal zone: 3862016 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x44b7f000-0x45e7efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x45e7f000-0x45f7efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x45f7f000-0x45ffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x46000000-0x4f1fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x4f200000-0xdfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
    [ 0.000000] e820: [mem 0x4f200000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff8804aea00000 s86336 r8192 d24256 u262144
    [ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4078625
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-32-generic root=UUID=062ea7e8-5c86-4852-ba25-0372be603607 ro quiet splash vt.handoff=7
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 16211348K/16573552K available (7602K kernel code, 1137K rwdata, 3484K rodata, 1356K init, 1440K bss, 362204K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
    [ 0.000000] Offload RCU callbacks from all CPUs
    [ 0.000000] Offload RCU callbacks from CPUs: 0-7.
    [ 0.000000] NR_IRQS:16640 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 66584576 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration failed
    [ 0.008000] tsc: PIT calibration matches HPET. 1 loops
    [ 0.008000] tsc: Detected 2693.754 MHz processor
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.50 BogoMIPS (lpj=10775016)
    [ 0.000005] pid_max: default: 32768 minimum: 301
    [ 0.000024] Security Framework initialized
    [ 0.000038] AppArmor: AppArmor initialized
    [ 0.000039] Yama: becoming mindful.
    [ 0.000989] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
    [ 0.003366] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.004363] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.004378] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.004573] Initializing cgroup subsys memory
    [ 0.004578] Initializing cgroup subsys devices
    [ 0.004579] Initializing cgroup subsys freezer
    [ 0.004581] Initializing cgroup subsys blkio
    [ 0.004582] Initializing cgroup subsys perf_event
    [ 0.004584] Initializing cgroup subsys hugetlb
    [ 0.004602] CPU: Physical Processor ID: 0
    [ 0.004603] CPU: Processor Core ID: 0
    [ 0.004607] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    [ 0.004607] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.005456] mce: CPU supports 9 MCE banks
    [ 0.005469] CPU0: Thermal monitoring enabled (TM1)
    [ 0.005479] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
    [ 0.005479] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
    [ 0.005479] tlb_flushall_shift: 6
    [ 0.005975] Freeing SMP alternatives memory: 32K (ffffffff81e71000 - ffffffff81e79000)
    [ 0.006826] ACPI: Core revision 20131115
    [ 0.015427] ACPI: All ACPI Tables successfully acquired
    [ 0.015707] ftrace: allocating 31443 entries in 123 pages
    [ 0.027389] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.067059] smpboot: CPU0: Intel(R) Core(TM) i7-4800MQ CPU @ 2.70GHz (fam: 06, model: 3c, stepping: 03)
    [ 0.067065] TSC deadline timer enabled
    [ 0.067072] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [ 0.067078] ... version: 3
    [ 0.067079] ... bit width: 48
    [ 0.067079] ... generic registers: 4
    [ 0.067080] ... value mask: 0000ffffffffffff
    [ 0.067081] ... max period: 0000ffffffffffff
    [ 0.067082] ... fixed-purpose events: 3
    [ 0.067082] ... event mask: 000000070000000f
    [ 0.068367] x86: Booting SMP configuration:
    [ 0.082362] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.068369] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
    [ 0.166721] x86: Booted up 1 node, 8 CPUs
    [ 0.166724] smpboot: Total of 8 processors activated (43100.06 BogoMIPS)
    [ 0.174163] devtmpfs: initialized
    [ 0.177951] EVM: security.selinux
    [ 0.177953] EVM: security.SMACK64
    [ 0.177953] EVM: security.ima
    [ 0.177954] EVM: security.capability
    [ 0.177989] PM: Registering ACPI NVS region [mem 0x45e7f000-0x45f7efff] (1048576 bytes)
    [ 0.178592] pinctrl core: initialized pinctrl subsystem
    [ 0.178637] regulator-dummy: no parameters
    [ 0.178663] RTC time: 20:49:45, date: 04/17/15
    [ 0.178689] NET: Registered protocol family 16
    [ 0.178764] cpuidle: using governor ladder
    [ 0.178766] cpuidle: using governor menu
    [ 0.178795] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.178796] ACPI: bus type PCI registered
    [ 0.178798] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.178847] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.178849] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.194702] PCI: Using configuration type 1 for base access
    [ 0.194961] mtrr: your CPUs had inconsistent variable MTRR settings
    [ 0.194962] mtrr: probably your BIOS does not setup all CPUs.
    [ 0.194963] mtrr: corrected configuration.
    [ 0.195520] bio: create slab <bio-0> at 0
    [ 0.195643] ACPI: Added _OSI(Module Device)
    [ 0.195645] ACPI: Added _OSI(Processor Device)
    [ 0.195645] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.195646] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.218003] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.246072] ACPI: SSDT 0000000045de3918 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
    [ 0.246512] ACPI: Dynamic OEM Table Load:
    [ 0.246513] ACPI: SSDT (null) 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
    [ 0.250171] ACPI: SSDT 0000000045de4698 0005DB (v01 PmRef ApIst 00003000 INTL 20110112)
    [ 0.250664] ACPI: Dynamic OEM Table Load:
    [ 0.250666] ACPI: SSDT (null) 0005DB (v01 PmRef ApIst 00003000 INTL 20110112)
    [ 0.254062] ACPI: SSDT 0000000045de2d98 000119 (v01 PmRef ApCst 00003000 INTL 20110112)
    [ 0.254498] ACPI: Dynamic OEM Table Load:
    [ 0.254499] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20110112)
    [ 2.268291] ACPI: Interpreter enabled
    [ 2.268297] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
    [ 2.268302] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
    [ 2.268314] ACPI: (supports S0 S3 S4 S5)
    [ 2.268315] ACPI: Using IOAPIC for interrupt routing
    [ 2.268332] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 2.268475] ACPI: No dock devices found.
    [ 2.270541] ACPI: Power Resource [APPR] (off)
    [ 2.287340] ACPI: Power Resource [COMP] (on)
    [ 2.287629] ACPI: Power Resource [LPP] (on)
    [ 2.296206] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
    [ 2.296211] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 2.296871] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
    [ 2.297740] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
    [ 2.298295] PCI host bridge to bus 0000:00
    [ 2.298297] pci_bus 0000:00: root bus resource [bus 00-fe]
    [ 2.298299] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 2.298300] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 2.298301] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 2.298302] pci_bus 0000:00: root bus resource [mem 0x4f200000-0xdfffffff]
    [ 2.298304] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff]
    [ 2.298305] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff]
    [ 2.298311] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
    [ 2.298395] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
    [ 2.298423] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 2.298494] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
    [ 2.298503] pci 0000:00:02.0: reg 0x10: [mem 0xcc400000-0xcc7fffff 64bit]
    [ 2.298508] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
    [ 2.298512] pci 0000:00:02.0: reg 0x20: [io 0x6000-0x603f]
    [ 2.298605] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
    [ 2.298620] pci 0000:00:14.0: reg 0x10: [mem 0xcca20000-0xcca2ffff 64bit]
    [ 2.298666] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 2.298721] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 2.298748] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
    [ 2.298767] pci 0000:00:16.0: reg 0x10: [mem 0xcca35000-0xcca3500f 64bit]
    [ 2.298825] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 2.298896] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002
    [ 2.298911] pci 0000:00:16.3: reg 0x10: [io 0x60b0-0x60b7]
    [ 2.298919] pci 0000:00:16.3: reg 0x14: [mem 0xcca3c000-0xcca3cfff]
    [ 2.299046] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000
    [ 2.299061] pci 0000:00:19.0: reg 0x10: [mem 0xcca00000-0xcca1ffff]
    [ 2.299069] pci 0000:00:19.0: reg 0x14: [mem 0xcca3b000-0xcca3bfff]
    [ 2.299076] pci 0000:00:19.0: reg 0x18: [io 0x6080-0x609f]
    [ 2.299131] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    [ 2.299180] pci 0000:00:19.0: System wakeup disabled by ACPI
    [ 2.299207] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
    [ 2.299225] pci 0000:00:1a.0: reg 0x10: [mem 0xcca3a000-0xcca3a3ff]
    [ 2.299306] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 2.299357] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 2.299384] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
    [ 2.299397] pci 0000:00:1b.0: reg 0x10: [mem 0xcca30000-0xcca33fff 64bit]
    [ 2.299455] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 2.299525] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
    [ 2.299590] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 2.299664] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
    [ 2.299721] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 2.299772] pci 0000:00:1c.4: System wakeup disabled by ACPI
    [ 2.299795] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
    [ 2.299853] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
    [ 2.299904] pci 0000:00:1c.6: System wakeup disabled by ACPI
    [ 2.299928] pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400
    [ 2.299986] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
    [ 2.300037] pci 0000:00:1c.7: System wakeup disabled by ACPI
    [ 2.300063] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
    [ 2.300083] pci 0000:00:1d.0: reg 0x10: [mem 0xcca39000-0xcca393ff]
    [ 2.300163] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 2.300215] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 2.300241] pci 0000:00:1f.0: [8086:8c4f] type 00 class 0x060100
    [ 2.300400] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
    [ 2.300414] pci 0000:00:1f.2: reg 0x10: [io 0x60a8-0x60af]
    [ 2.300421] pci 0000:00:1f.2: reg 0x14: [io 0x60bc-0x60bf]
    [ 2.300428] pci 0000:00:1f.2: reg 0x18: [io 0x60a0-0x60a7]
    [ 2.300435] pci 0000:00:1f.2: reg 0x1c: [io 0x60b8-0x60bb]
    [ 2.300442] pci 0000:00:1f.2: reg 0x20: [io 0x6060-0x607f]
    [ 2.300448] pci 0000:00:1f.2: reg 0x24: [mem 0xcca38000-0xcca387ff]
    [ 2.300482] pci 0000:00:1f.2: PME# supported from D3hot
    [ 2.300546] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
    [ 2.300560] pci 0000:00:1f.3: reg 0x10: [mem 0xcca34000-0xcca340ff 64bit]
    [ 2.300578] pci 0000:00:1f.3: reg 0x20: [io 0xef80-0xef9f]
    [ 2.300706] pci 0000:01:00.0: [10de:11fc] type 00 class 0x030000
    [ 2.300719] pci 0000:01:00.0: reg 0x10: [mem 0xcb000000-0xcbffffff]
    [ 2.300733] pci 0000:01:00.0: reg 0x14: [mem 0x50000000-0x5fffffff 64bit pref]
    [ 2.300746] pci 0000:01:00.0: reg 0x1c: [mem 0x60000000-0x61ffffff 64bit pref]
    [ 2.300755] pci 0000:01:00.0: reg 0x24: [io 0x5000-0x507f]
    [ 2.300763] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
    [ 2.300868] pci 0000:01:00.1: [10de:0e0b] type 00 class 0x040300
    [ 2.300883] pci 0000:01:00.1: reg 0x10: [mem 0xcc000000-0xcc003fff]
    [ 2.306710] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 2.306712] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
    [ 2.306714] pci 0000:00:01.0: bridge window [mem 0xcb000000-0xcc0fffff]
    [ 2.306717] pci 0000:00:01.0: bridge window [mem 0x50000000-0x61ffffff 64bit pref]
    [ 2.306776] acpiphp: Slot [1] registered
    [ 2.306781] pci 0000:00:1c.0: PCI bridge to [bus 02-3a]
    [ 2.306787] pci 0000:00:1c.0: bridge window [mem 0xb4000000-0xca0fffff]
    [ 2.306792] pci 0000:00:1c.0: bridge window [mem 0x70000000-0x91ffffff 64bit pref]
    [ 2.306850] acpiphp: Slot [1-1] registered
    [ 2.306888] pci 0000:00:1c.4: PCI bridge to [bus 3b-5b]
    [ 2.306892] pci 0000:00:1c.4: bridge window [io 0x3000-0x4fff]
    [ 2.306895] pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xb3ffffff]
    [ 2.306998] pci 0000:5c:00.0: [8086:088e] type 00 class 0x028000
    [ 2.307064] pci 0000:5c:00.0: reg 0x10: [mem 0xcc900000-0xcc901fff 64bit]
    [ 2.307300] pci 0000:5c:00.0: PME# supported from D0 D3hot D3cold
    [ 2.314738] pci 0000:00:1c.6: PCI bridge to [bus 5c]
    [ 2.314743] pci 0000:00:1c.6: bridge window [mem 0xcc900000-0xcc9fffff]
    [ 2.314860] pci 0000:5d:00.0: [10ec:5249] type 00 class 0xff0000
    [ 2.314923] pci 0000:5d:00.0: reg 0x10: [mem 0xcc800000-0xcc800fff]
    [ 2.315269] pci 0000:5d:00.0: supports D1 D2
    [ 2.315270] pci 0000:5d:00.0: PME# supported from D1 D2 D3hot D3cold
    [ 2.322736] pci 0000:00:1c.7: PCI bridge to [bus 5d]
    [ 2.322741] pci 0000:00:1c.7: bridge window [mem 0xcc800000-0xcc8fffff]
    [ 2.322799] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 2.323663] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 2.323700] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 2.323734] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 2.323768] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
    [ 2.323802] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 2.323835] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 2.323869] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 2.323903] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 2.324240] ACPI: Enabled 7 GPEs in block 00 to 3F
    [ 2.324246] ACPI: \_SB_.PCI0: notify handler is installed
    [ 2.324298] Found 1 acpi root devices
    [ 2.324457] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
    [ 2.324517] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 2.324521] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
    [ 2.324522] vgaarb: loaded
    [ 2.324523] vgaarb: bridge control possible 0000:01:00.0
    [ 2.324524] vgaarb: no bridge control possible 0000:00:02.0
    [ 2.324635] SCSI subsystem initialized
    [ 2.324664] libata version 3.00 loaded.
    [ 2.324678] ACPI: bus type USB registered
    [ 2.324688] usbcore: registered new interface driver usbfs
    [ 2.324693] usbcore: registered new interface driver hub
    [ 2.324707] usbcore: registered new device driver usb
    [ 2.324786] PCI: Using ACPI for IRQ routing
    [ 2.330294] PCI: pci_cache_line_size set to 64 bytes
    [ 2.330342] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
    [ 2.330343] e820: reserve RAM buffer [mem 0x44b7f000-0x47ffffff]
    [ 2.330345] e820: reserve RAM buffer [mem 0x46000000-0x47ffffff]
    [ 2.330346] e820: reserve RAM buffer [mem 0x4aee00000-0x4afffffff]
    [ 2.330402] NetLabel: Initializing
    [ 2.330403] NetLabel: domain hash size = 128
    [ 2.330403] NetLabel: protocols = UNLABELED CIPSOv4
    [ 2.330412] NetLabel: unlabeled traffic allowed by default
    [ 2.330452] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 2.330457] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 2.332489] Switched to clocksource hpet
    [ 2.335878] AppArmor: AppArmor Filesystem Enabled
    [ 2.335891] pnp: PnP ACPI init
    [ 2.335898] ACPI: bus type PNP registered
    [ 2.336030] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 2.336032] system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved
    [ 2.336033] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 2.336035] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 2.336036] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
    [ 2.336037] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 2.336039] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 2.336040] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 2.336042] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 2.336043] system 00:00: [mem 0x4f210000-0x4f21ffff] has been reserved
    [ 2.336045] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 2.336141] pnp 00:01: [dma 4]
    [ 2.336154] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 2.336171] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    [ 2.336216] pnp 00:03: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
    [ 2.336288] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 2.336322] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 2.336351] system 00:06: [io 0x0200-0x027f] has been reserved
    [ 2.336353] system 00:06: [io 0xffff] has been reserved
    [ 2.336354] system 00:06: [io 0xffff] has been reserved
    [ 2.336355] system 00:06: [io 0xffff] has been reserved
    [ 2.336357] system 00:06: [io 0x1800-0x18fe] could not be reserved
    [ 2.336358] system 00:06: [io 0xef80-0xef9f] has been reserved
    [ 2.336360] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 2.336393] system 00:07: [io 0x0800-0x087f] has been reserved
    [ 2.336395] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 2.336413] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 2.336712] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
    [ 2.336939] pnp 00:0a: [dma 0 disabled]
    [ 2.336985] pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active)
    [ 2.337008] pnp 00:0b: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
    [ 2.337027] pnp 00:0c: Plug and Play ACPI device, IDs SYN300a SYN0100 SYN0002 PNP0f13 (active)
    [ 2.337195] pnp 00:0d: Plug and Play ACPI device, IDs HPQ6007 (active)
    [ 2.337255] system 00:0e: [mem 0x20000000-0x201fffff] could not be reserved
    [ 2.337257] system 00:0e: [mem 0x40004000-0x40004fff] could not be reserved
    [ 2.337259] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 2.337398] pnp: PnP ACPI: found 15 devices
    [ 2.337399] ACPI: bus type PNP unregistered
    [ 2.343175] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
    [ 2.343188] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02-3a] add_size 1000
    [ 2.343196] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3b-5b] add_size 200000
    [ 2.343209] pci 0000:00:1c.7: bridge window [io 0x1000-0x0fff] to [bus 5d] add_size 1000
    [ 2.343210] pci 0000:00:1c.7: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 5d] add_size 200000
    [ 2.343215] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 2.343216] pci 0000:00:1c.7: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 2.343217] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 2.343219] pci 0000:00:1c.7: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 2.343222] pci 0000:00:1c.4: BAR 15: assigned [mem 0x4f300000-0x4f4fffff 64bit pref]
    [ 2.343224] pci 0000:00:1c.7: BAR 15: assigned [mem 0x4f500000-0x4f6fffff 64bit pref]
    [ 2.343225] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
    [ 2.343227] pci 0000:00:1c.7: BAR 13: assigned [io 0x7000-0x7fff]
    [ 2.343229] pci 0000:01:00.0: BAR 6: assigned [mem 0xcc080000-0xcc0fffff pref]
    [ 2.343231] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 2.343233] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
    [ 2.343235] pci 0000:00:01.0: bridge window [mem 0xcb000000-0xcc0fffff]
    [ 2.343237] pci 0000:00:01.0: bridge window [mem 0x50000000-0x61ffffff 64bit pref]
    [ 2.343240] pci 0000:00:1c.0: PCI bridge to [bus 02-3a]
    [ 2.343243] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 2.343247] pci 0000:00:1c.0: bridge window [mem 0xb4000000-0xca0fffff]
    [ 2.343251] pci 0000:00:1c.0: bridge window [mem 0x70000000-0x91ffffff 64bit pref]
    [ 2.343256] pci 0000:00:1c.4: PCI bridge to [bus 3b-5b]
    [ 2.343259] pci 0000:00:1c.4: bridge window [io 0x3000-0x4fff]
    [ 2.343263] pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xb3ffffff]
    [ 2.343267] pci 0000:00:1c.4: bridge window [mem 0x4f300000-0x4f4fffff 64bit pref]
    [ 2.343272] pci 0000:00:1c.6: PCI bridge to [bus 5c]
    [ 2.343276] pci 0000:00:1c.6: bridge window [mem 0xcc900000-0xcc9fffff]
    [ 2.343283] pci 0000:00:1c.7: PCI bridge to [bus 5d]
    [ 2.343285] pci 0000:00:1c.7: bridge window [io 0x7000-0x7fff]
    [ 2.343289] pci 0000:00:1c.7: bridge window [mem 0xcc800000-0xcc8fffff]
    [ 2.343293] pci 0000:00:1c.7: bridge window [mem 0x4f500000-0x4f6fffff 64bit pref]
    [ 2.343298] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 2.343300] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 2.343301] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 2.343302] pci_bus 0000:00: resource 7 [mem 0x4f200000-0xdfffffff]
    [ 2.343303] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff]
    [ 2.343304] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff]
    [ 2.343306] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
    [ 2.343307] pci_bus 0000:01: resource 1 [mem 0xcb000000-0xcc0fffff]
    [ 2.343308] pci_bus 0000:01: resource 2 [mem 0x50000000-0x61ffffff 64bit pref]
    [ 2.343309] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 2.343311] pci_bus 0000:02: resource 1 [mem 0xb4000000-0xca0fffff]
    [ 2.343312] pci_bus 0000:02: resource 2 [mem 0x70000000-0x91ffffff 64bit pref]
    [ 2.343313] pci_bus 0000:3b: resource 0 [io 0x3000-0x4fff]
    [ 2.343314] pci_bus 0000:3b: resource 1 [mem 0xb0000000-0xb3ffffff]
    [ 2.343315] pci_bus 0000:3b: resource 2 [mem 0x4f300000-0x4f4fffff 64bit pref]
    [ 2.343317] pci_bus 0000:5c: resource 1 [mem 0xcc900000-0xcc9fffff]
    [ 2.343318] pci_bus 0000:5d: resource 0 [io 0x7000-0x7fff]
    [ 2.343319] pci_bus 0000:5d: resource 1 [mem 0xcc800000-0xcc8fffff]
    [ 2.343320] pci_bus 0000:5d: resource 2 [mem 0x4f500000-0x4f6fffff 64bit pref]
    [ 2.343341] NET: Registered protocol family 2
    [ 2.343489] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 2.343658] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 2.343769] TCP: Hash tables configured (established 131072 bind 65536)
    [ 2.343782] TCP: reno registered
    [ 2.343798] UDP hash table entries: 8192 (order: 6, 262144 bytes)
    [ 2.343840] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
    [ 2.343907] NET: Registered protocol family 1
    [ 2.343916] pci 0000:00:02.0: Boot video device
    [ 2.343923] pci 0000:00:14.0: enabling device (0000 -> 0002)
    [ 2.344387] PCI: CLS 64 bytes, default 64
    [ 2.344426] Trying to unpack rootfs image as initramfs...
    [ 2.581584] Freeing initrd memory: 18464K (ffff880035be0000 - ffff880036de8000)
    [ 2.581588] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 2.581590] software IO TLB [mem 0x40b7f000-0x44b7f000] (64MB) mapped at [ffff880040b7f000-ffff880044b7efff]
    [ 2.581814] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581821] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581827] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581834] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581839] microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581845] microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581851] microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581858] microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581891] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 2.581892] Scanning for low memory corruption every 60 seconds
    [ 2.582096] Initialise system trusted keyring
    [ 2.582129] audit: initializing netlink socket (disabled)
    [ 2.582137] type=2000 audit(1429303787.580:1): initialized
    [ 2.605505] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 2.606581] zbud: loaded
    [ 2.606685] VFS: Disk quotas dquot_6.5.2
    [ 2.606715] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 2.606997] fuse init (API version 7.22)
    [ 2.607048] msgmni has been set to 31698
    [ 2.607084] Key type big_key registered
    [ 2.607458] Key type asymmetric registered
    [ 2.607459] Asymmetric key parser 'x509' registered
    [ 2.607478] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 2.607514] io scheduler noop registered
    [ 2.607516] io scheduler deadline registered (default)
    [ 2.607531] io scheduler cfq registered
    [ 2.607686] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 2.608087] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 2.608097] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 2.608122] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
    [ 2.608123] vesafb: scrolling: redraw
    [ 2.608124] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 2.608661] vesafb: framebuffer at 0xa0000000, mapped to 0xffffc90011c00000, using 8128k, total 8128k
    [ 2.763515] Console: switching to colour frame buffer device 240x67
    [ 2.917758] fb0: VESA VGA frame buffer device
    [ 2.917770] intel_idle: MWAIT substates: 0x42120
    [ 2.917771] intel_idle: v0.4 model 0x3C
    [ 2.917771] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 2.917911] ipmi message handler version 39.2
    [ 2.918057] ACPI: AC Adapter [AC] (on-line)
    [ 2.918197] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
    [ 2.918201] ACPI: Sleep Button [SLPB]
    [ 2.918223] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [ 2.918238] ACPI: Lid Switch [LID]
    [ 2.918260] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
    [ 2.918261] ACPI: Power Button [PWRF]
    [ 2.943141] thermal LNXTHERM:00: registered as thermal_zone0
    [ 2.943143] ACPI: Thermal Zone [CPUZ] (49 C)
    [ 2.957429] ACPI Error: [CFGD] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
    [ 2.957433] ACPI Error: Method parse/execution failed [\_TZ_.PSL_] (Node ffff88049846d410), AE_NOT_FOUND (20131115/psparse-536)
    [ 2.957437] ACPI Error: Method parse/execution failed [\_TZ_.GFXZ._PSL] (Node ffff88049846d000), AE_NOT_FOUND (20131115/psparse-536)
    [ 2.957440] ACPI: Invalid passive threshold
    [ 2.967568] thermal LNXTHERM:01: registered as thermal_zone1
    [ 2.967569] ACPI: Thermal Zone [GFXZ] (36 C)
    [ 2.982819] thermal LNXTHERM:02: registered as thermal_zone2
    [ 2.982820] ACPI: Thermal Zone [EXTZ] (0 C)
    [ 2.998086] thermal LNXTHERM:03: registered as thermal_zone3
    [ 2.998087] ACPI: Thermal Zone [LOCZ] (0 C)
    [ 3.003351] ACPI Error: [CFGD] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
    [ 3.003354] ACPI Error: Method parse/execution failed [\_TZ_.PSL_] (Node ffff88049846d410), AE_NOT_FOUND (20131115/psparse-536)
    [ 3.003357] ACPI Error: Method parse/execution failed [\_TZ_.BATZ._PSL] (Node ffff88049846d230), AE_NOT_FOUND (20131115/psparse-536)
    [ 3.003360] ACPI: Invalid passive threshold
    [ 3.013372] thermal LNXTHERM:04: registered as thermal_zone4
    [ 3.013374] ACPI: Thermal Zone [BATZ] (28 C)
    [ 3.013559] thermal LNXTHERM:05: registered as thermal_zone5
    [ 3.013560] ACPI: Thermal Zone [PCHZ] (59 C)
    [ 3.013623] thermal LNXTHERM:06: registered as thermal_zone6
    [ 3.013624] ACPI: Thermal Zone [DM1Z] (0 C)
    [ 3.013684] thermal LNXTHERM:07: registered as thermal_zone7
    [ 3.013685] ACPI: Thermal Zone [DM2Z] (0 C)
    [ 3.013706] GHES: HEST is not enabled!
    [ 3.013781] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
    [ 3.034219] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
    [ 3.055810] 0000:00:16.3: ttyS4 at I/O 0x60b0 (irq = 19, base_baud = 115200) is a 16550A
    [ 3.056055] Linux agpgart interface v0.103
    [ 3.056183] tpm_tis 00:03: 1.2 TPM (device-id 0xB, rev-id 16)
    [ 3.057331] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 3.057335] ACPI: Battery Slot [BAT0] (battery present)
    [ 3.057372] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 3.057375] ACPI: Battery Slot [BAT1] (battery absent)
    [ 3.352138] tpm_tis 00:03: TPM is disabled/deactivated (0x7)
    [ 3.353165] brd: module loaded
    [ 3.353594] loop: module loaded
    [ 3.353831] libphy: Fixed MDIO Bus: probed
    [ 3.353886] tun: Universal TUN/TAP device driver, 1.6
    [ 3.353887] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
    [ 3.353914] PPP generic driver version 2.4.2
    [ 3.353943] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 3.353946] ehci-pci: EHCI PCI platform driver
    [ 3.354051] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 3.354055] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 3.354066] ehci-pci 0000:00:1a.0: debug port 2
    [ 3.357954] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 3.357966] ehci-pci 0000:00:1a.0: irq 16, io mem 0xcca3a000
    [ 3.368127] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 3.368158] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    [ 3.368159] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 3.368161] usb usb1: Product: EHCI Host Controller
    [ 3.368162] usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
    [ 3.368163] usb usb1: SerialNumber: 0000:00:1a.0
    [ 3.368233] hub 1-0:1.0: USB hub found
    [ 3.368238] hub 1-0:1.0: 3 ports detected
    [ 3.368420] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 3.368424] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 3.368434] ehci-pci 0000:00:1d.0: debug port 2
    [ 3.372323] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 3.372334] ehci-pci 0000:00:1d.0: irq 17, io mem 0xcca39000
    [ 3.384119] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 3.384147] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
    [ 3.384148] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 3.384149] usb usb2: Product: EHCI Host Controller
    [ 3.384150] usb usb2: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
    [ 3.384151] usb usb2: SerialNumber: 0000:00:1d.0
    [ 3.384234] hub 2-0:1.0: USB hub found
    [ 3.384238] hub 2-0:1.0: 3 ports detected
    [ 3.384329] ehci-platform: EHCI generic platform driver
    [ 3.384335] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 3.384336] ohci-pci: OHCI PCI platform driver
    [ 3.384342] ohci-platform: OHCI generic platform driver
    [ 3.384346] uhci_hcd: USB Universal Host Controller Interface driver
    [ 3.384439] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 3.384443] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 3.384525] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 3.384540] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
    [ 3.384587] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
    [ 3.384589] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 3.384590] usb usb3: Product: xHCI Host Controller
    [ 3.384591] usb usb3: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
    [ 3.384592] usb usb3: SerialNumber: 0000:00:14.0
    [ 3.384673] hub 3-0:1.0: USB hub found
    [ 3.384690] hub 3-0:1.0: 15 ports detected
    [ 3.385431] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 3.385434] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
    [ 3.385468] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
    [ 3.385470] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 3.385471] usb usb4: Product: xHCI Host Controller
    [ 3.385472] usb usb4: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
    [ 3.385473] usb usb4: SerialNumber: 0000:00:14.0
    [ 3.385551] hub 4-0:1.0: USB hub found
    [ 3.385562] hub 4-0:1.0: 6 ports detected
    [ 3.392184] i8042: PNP: PS/2 Controller [PNP0303S2K,PNP0f13S2M] at 0x60,0x64 irq 1,12
    [ 3.393372] i8042: Detected active multiplexing controller, rev 1.1
    [ 3.394020] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 3.394023] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 3.394040] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 3.394051] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 3.394062] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 3.394254] mousedev: PS/2 mouse device common for all mice
    [ 3.394420] rtc_cmos 00:08: RTC can wake from S4
    [ 3.394538] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
    [ 3.394563] rtc_cmos 00:08: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 3.394608] device-mapper: uevent: version 1.0.3
    [ 3.394668] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
    [ 3.394673] ledtrig-cpu: registered to indicate activity on CPUs
    [ 3.394743] TCP: cubic registered
    [ 3.394800] NET: Registered protocol family 10
    [ 3.394914] NET: Registered protocol family 17
    [ 3.394922] Key type dns_resolver registered
    [ 3.395160] Loading compiled-in X.509 certificates
    [ 3.395793] Loaded X.509 cert 'Magrathea: Glacier signing key: 223a1a1af7ef14be22890f9d1cc63d083fee59bf'
    [ 3.395800] registered taskstats version 1
    [ 3.397885] Key type trusted registered
    [ 3.399811] Key type encrypted registered
    [ 3.401785] AppArmor: AppArmor sha1 policy hashing enabled
    [ 3.419579] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
    [ 3.460151] tpm_tis 00:03: A TPM error (7) occurred attempting to read a pcr value
    [ 3.460154] IMA: No TPM chip found, activating TPM-bypass!
    [ 3.460705] regulator-dummy: disabling
    [ 3.460903] Magic number: 11:175:852
    [ 3.461055] rtc_cmos 00:08: setting system clock to 2015-04-17 20:49:48 UTC (1429303788)
    [ 3.462218] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [ 3.462219] EDD information not available.
    [ 3.462247] PM: Hibernation image not present or could not be loaded.
    [ 3.463163] Freeing unused kernel memory: 1356K (ffffffff81d1e000 - ffffffff81e71000)
    [ 3.463165] Write protecting the kernel read-only data&colon; 12288k
    [ 3.464381] Freeing unused kernel memory: 580K (ffff88000176f000 - ffff880001800000)
    [ 3.465532] Freeing unused kernel memory: 612K (ffff880001b67000 - ffff880001c00000)
    [ 3.478948] udevd[143]: starting version 175
    [ 3.509828] pps_core: LinuxPPS API ver. 1 registered
    [ 3.509831] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
    [ 3.511322] PTP clock support registered
    [ 3.511576] rtsx_pci 0000:5d:00.0: irq 42 for MSI/MSI-X
    [ 3.511591] rtsx_pci 0000:5d:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 42
    [ 3.513783] ahci 0000:00:1f.2: version 3.0
    [ 3.513949] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
    [ 3.513977] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
    [ 3.514002] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xd impl SATA mode
    [ 3.514005] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
    [ 3.515548] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
    [ 3.515549] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
    [ 3.528600] scsi0 : ahci
    [ 3.528832] scsi1 : ahci
    [ 3.528908] scsi2 : ahci
    [ 3.528979] scsi3 : ahci
    [ 3.529074] scsi4 : ahci
    [ 3.529152] scsi5 : ahci
    [ 3.529185] ata1: SATA max UDMA/133 abar m2048@0xcca38000 port 0xcca38100 irq 43
    [ 3.529186] ata2: DUMMY
    [ 3.529189] ata3: SATA max UDMA/133 abar m2048@0xcca38000 port 0xcca38200 irq 43
    [ 3.529191] ata4: SATA max UDMA/133 abar m2048@0xcca38000 port 0xcca38280 irq 43
    [ 3.529192] ata5: DUMMY
    [ 3.529193] ata6: DUMMY
    [ 3.529421] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
    [ 3.529440] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
    [ 3.580099] tsc: Refined TSC clocksource calibration: 2693.762 MHz
    [ 3.596226] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
    [ 3.612542] usb 4-1: New USB device found, idVendor=0424, idProduct=5434
    [ 3.612545] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
    [ 3.612547] usb 4-1: Product: USB5534
    [ 3.612548] usb 4-1: Manufacturer: SMSC
    [ 3.612549] usb 4-1: SerialNumber: 1239567
    [ 3.614189] hub 4-1:1.0: USB hub found
    [ 3.614228] hub 4-1:1.0: 4 ports detected
    [ 3.697128] e1000e 0000:00:19.0 eth0: registered PHC clock
    [ 3.697131] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 5c:b9:01:fc:9d:75
    [ 3.697132] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
    [ 3.697163] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
    [ 3.724083] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 3.848014] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 3.848677] ata1.00: ATA-9: SanDisk SD6SB1M-256G-1006, X231706, max UDMA/100
    [ 3.848680] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
    [ 3.849416] ata1.00: configured for UDMA/100
    [ 3.849580] scsi 0:0:0:0: Direct-Access ATA SanDisk SD6SB1M- X231 PQ: 0 ANSI: 5
    [ 3.849710] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
    [ 3.849746] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 3.849748] sd 0:0:0:0: [sda] Write Protect is off
    [ 3.849750] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 3.849764] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3.850612] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
    [ 3.851144] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 3.856328] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
    [ 3.856331] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [ 3.856471] hub 1-1:1.0: USB hub found
    [ 3.856575] hub 1-1:1.0: 6 ports detected
    [ 3.967974] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 4.100292] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
    [ 4.100295] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [ 4.100529] hub 2-1:1.0: USB hub found
    [ 4.100626] hub 2-1:1.0: 8 ports detected
    [ 4.167897] ata3: SATA link down (SStatus 0 SControl 300)
    [ 4.267892] usb 3-1: new high-speed USB device number 2 using xhci_hcd
    [ 4.284185] usb 3-1: New USB device found, idVendor=0424, idProduct=5434
    [ 4.284188] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [ 4.284596] hub 3-1:1.0: USB hub found
    [ 4.284626] hub 3-1:1.0: 4 ports detected
    [ 4.451824] usb 3-5: new full-speed USB device number 3 using xhci_hcd
    [ 4.469313] usb 3-5: New USB device found, idVendor=138a, idProduct=003f
    [ 4.469316] usb 3-5: New USB device strings: Mfr=0, Product=0, SerialNumber=1
    [ 4.469318] usb 3-5: SerialNumber: 0030e4b96e96
    [ 4.487780] ata4: SATA link down (SStatus 0 SControl 300)
    [ 4.530624] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
    [ 4.530627] EXT4-fs (sda5): write access will be enabled during recovery
    [ 4.579770] Switched to clocksource tsc
    [ 4.635700] usb 3-7: new high-speed USB device number 4 using xhci_hcd
    [ 4.702947] EXT4-fs (sda5): orphan cleanup on readonly fs
    [ 4.702996] EXT4-fs (sda5): 2 orphan inodes deleted
    [ 4.702997] EXT4-fs (sda5): recovery complete
    [ 4.706848] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    [ 4.736086] usb 3-7: New USB device found, idVendor=05c8, idProduct=0369
    [ 4.736089] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [ 4.736090] usb 3-7: Product: HP HD Webcam
    [ 4.736092] usb 3-7: Manufacturer: SunplusIT INC.
    [ 4.777998] random: init urandom read with 97 bits of entropy available
    [ 4.815946] init: ureadahead main process (382) terminated with status 5
    [ 4.872399] Adding 8390772k swap on /dev/sda6. Priority:-1 extents:1 across:8390772k SSFS
    [ 4.910276] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
    [ 4.910848] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 4.915232] udevd[465]: starting version 175
    [ 4.919590] usb 3-11: new high-speed USB device number 5 using xhci_hcd
    [ 4.937952] usb 3-11: New USB device found, idVendor=03f0, idProduct=521d
    [ 4.937956] usb 3-11: New USB device strings: Mfr=5, Product=4, SerialNumber=0
    [ 4.937959] usb 3-11: Product: HP hs3110 HSPA+ Mobile Broadband Device
    [ 4.937961] usb 3-11: Manufacturer: Hewlett-Packard
    [ 4.941014] lp: driver loaded but no devices found
    [ 4.969070] Initializing HPQ6001 module
    [ 4.969146] input: HP Wireless hotkeys as /devices/virtual/input/input8
    [ 4.977289] wmi: Mapper loaded
    [ 4.985916] [drm] Initialized drm 1.1.0 20060810
    [ 4.991703] hp_accel: laptop model unknown, using default axes configuration
    [ 4.998586] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
    [ 5.004770] parport_pc 00:0a: reported by Plug and Play ACPI
    [ 5.004867] parport0: PC-style at 0x378 (0x778), irq 5, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
    [ 5.013849] [drm] Memory usable by graphics device = 2048M
    [ 5.013854] checking generic (a0000000 7f0000) vs hw (a0000000 10000000)
    [ 5.013856] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [ 5.013874] Console: switching to colour dummy device 80x25
    [ 5.030434] random: nonblocking pool is initialized
    [ 5.031503] cfg80211: Calling CRDA to update world regulatory domain
    [ 5.036770] ppdev: user-space parallel port driver
    [ 5.039277] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 5.039280] Copyright(c) 2003-2013 Intel Corporation
    [ 5.039419] iwlwifi 0000:5c:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 5.039474] iwlwifi 0000:5c:00.0: irq 46 for MSI/MSI-X
    [ 5.045123] type=1400 audit(1429292990.079:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=725 comm="apparmor_parser"
    [ 5.045130] type=1400 audit(1429292990.079:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=725 comm="apparmor_parser"
    [ 5.045135] type=1400 audit(1429292990.079:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=725 comm="apparmor_parser"
    [ 5.045666] type=1400 audit(1429292990.079:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=725 comm="apparmor_parser"
    [ 5.045672] type=1400 audit(1429292990.079:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=725 comm="apparmor_parser"
    [ 5.045949] type=1400 audit(1429292990.079:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=725 comm="apparmor_parser"
    [ 5.049977] Bluetooth: Core ver 2.17
    [ 5.049990] NET: Registered protocol family 31
    [ 5.049991] Bluetooth: HCI device and connection manager initialized
    [ 5.049998] Bluetooth: HCI socket layer initialized
    [ 5.050001] Bluetooth: L2CAP socket layer initialized
    [ 5.050005] Bluetooth: SCO socket layer initialized
    [ 5.051107] iwlwifi 0000:5c:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
    [ 5.057904] Bluetooth: RFCOMM TTY layer initialized
    [ 5.057915] Bluetooth: RFCOMM socket layer initialized
    [ 5.057920] Bluetooth: RFCOMM ver 1.11
    [ 5.061071] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 5.061074] Bluetooth: BNEP filters: protocol multicast
    [ 5.061082] Bluetooth: BNEP socket layer initialized
    [ 5.063649] i915 0000:00:02.0: irq 47 for MSI/MSI-X
    [ 5.063657] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 5.063658] [drm] Driver supports precise vblank timestamp query.
    [ 5.063906] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=nonewns=none
    [ 5.073667] iwlwifi 0000:5c:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [ 5.073671] iwlwifi 0000:5c:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
    [ 5.073673] iwlwifi 0000:5c:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 5.073676] iwlwifi 0000:5c:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0
    [ 5.073733] iwlwifi 0000:5c:00.0: L1 Disabled; Enabling L0S
    [ 5.099787] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 5.107517] usb 3-12: new full-speed USB device number 6 using xhci_hcd
    [ 5.107863] lp0: using parport0 (interrupt-driven).
    [ 5.117196] MXM: GUID detected in BIOS
    [ 5.117211] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 5.127446] usb 3-12: New USB device found, idVendor=8087, idProduct=07da
    [ 5.127450] usb 3-12: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [ 5.136368] usbcore: registered new interface driver btusb
    [ 5.139414] init: failsafe main process (863) killed by TERM signal
    [ 5.153066] type=1400 audit(1429292990.187:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=953 comm="apparmor_parser"
    [ 5.153074] type=1400 audit(1429292990.187:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=953 comm="apparmor_parser"
    [ 5.153638] type=1400 audit(1429292990.187:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=953 comm="apparmor_parser"
    [ 5.175774] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 5.215491] usb 3-1.2: new high-speed USB device number 7 using xhci_hcd
    [ 5.231627] usb 3-1.2: New USB device found, idVendor=0424, idProduct=2512
    [ 5.231630] usb 3-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [ 5.232078] hub 3-1.2:1.0: USB hub found
    [ 5.232107] hub 3-1.2:1.0: 2 ports detected
    [ 5.245239] Linux video capture interface: v2.00
    [ 5.249575] uvcvideo: Found UVC 1.00 device HP HD Webcam (05c8:0369)
    [ 5.258139] input: HP HD Webcam as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/input/input12
    [ 5.258213] usbcore: registered new interface driver uvcvideo
    [ 5.258215] USB Video Class driver (1.1.1)
    [ 5.267740] ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 5.267757] input: HP WMI hotkeys as /devices/virtual/input/input11
    [ 5.299688] ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 5.342957] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
    [ 5.372070] lis3lv02d: 8 bits 3DC sensor found
    [ 5.372127] ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 5.385320] fbcon: inteldrmfb (fb0) is primary device
    [ 5.408760] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
    [ 5.416127] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
    [ 5.416135] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEGP.DGFX handle
    [ 5.443465] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
    [ 5.443566] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 5.443818] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 5.444803] iwlwifi 0000:5c:00.0: L1 Disabled; Enabling L0S
    [ 5.451546] iwlwifi 0000:5c:00.0: Radio type=0x2-0x1-0x0
    [ 5.507433] usb 3-1.2.1: new low-speed USB device number 8 using xhci_hcd
    [ 5.530647] usb 3-1.2.1: New USB device found, idVendor=046d, idProduct=c045
    [ 5.530649] usb 3-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [ 5.530650] usb 3-1.2.1: Product: USB-PS/2 Optical Mouse
    [ 5.530651] usb 3-1.2.1: Manufacturer: Logitech
    [ 5.530803] usb 3-1.2.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 5.603397] usb 3-1.2.2: new low-speed USB device number 9 using xhci_hcd
    [ 5.642247] usb 3-1.2.2: New USB device found, idVendor=03f0, idProduct=034a
    [ 5.642249] usb 3-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [ 5.642250] usb 3-1.2.2: Product: HP Elite USB Keyboard
    [ 5.642251] usb 3-1.2.2: Manufacturer: Chicony
    [ 5.642359] usb 3-1.2.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 5.642365] usb 3-1.2.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 5.650544] hidraw: raw HID events driver (C) Jiri Kosina
    [ 5.672470] usbcore: registered new interface driver usbhid
    [ 5.672471] usbhid: USB HID core driver
    [ 5.676000] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.2/3-1.2.1/3-1.2.1:1.0/input/input13
    [ 5.676142] hid-generic 0003:046D:C045.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-1.2.1/input0
    [ 5.676260] input: Chicony HP Elite USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.2/3-1.2.2/3-1.2.2:1.0/input/input14
    [ 5.676361] hid-generic 0003:03F0:034A.0002: input,hidraw1: USB HID v1.10 Keyboard [Chicony HP Elite USB Keyboard] on usb-0000:00:14.0-1.2.2/input0
    [ 5.679926] input: Chicony HP Elite USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.2/3-1.2.2/3-1.2.2:1.1/input/input15
    [ 5.680033] hid-generic 0003:03F0:034A.0003: input,hidraw2: USB HID v1.10 Device [Chicony HP Elite USB Keyboard] on usb-0000:00:14.0-1.2.2/input1
    [ 5.724422] iwlwifi 0000:5c:00.0: L1 Disabled; Enabling L0S
    [ 5.731055] iwlwifi 0000:5c:00.0: Radio type=0x2-0x1-0x0
    [ 5.819472] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 5.819868] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 6.122492] input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input10
    [ 6.743022] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input17
    [ 6.791046] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
    [ 6.950914] Console: switching to colour frame buffer device 240x67
    [ 6.954403] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 6.954405] i915 0000:00:02.0: registered panic notifier
    [ 6.954426] nouveau 0000:01:00.0: enabling device (0004 -> 0007)
    [ 6.954972] ACPI: Video Device [DGFX] (multi-head: yes rom: yes post: no)
    [ 6.955055] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input18
    [ 6.959873] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 6.959978] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input19
    [ 6.960085] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 6.960160] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
    [ 6.960166] ACPI: If an ACPI driver is

    @emeres: Sorry, yes, it's an HP 2013 UltraSlim Docking Station. I figured it was the only one compatible with the notebook model I provided.
    Regarding any electrical circuitry or controls... well, sure, I'm assuming there's some circuitry in there
    I'll give a whirl at using that two screen setup when I get a chance. I'm not inclined to think I need to hard-code it in a xorg conf file of some sort given that xrandr finds it just fine. I'm just perplexed by why it goes AWOL after one connect/disconnect. Now that you mention it, it could be the docking station internals, as I'm assuming most folks would be using this to plug in their computer, then completely remove it to go elsewhere, and then come back to their desk. Thus, they'd be physically disconnecting it vs. just toggling?
    That said, I'm pretty sure I can use Windows Fn+F4 to toggle laptop vs. laptop + "projector" (what Win7 calls any external display) all day with no issues, so I'd think xrandr should be able to do the same?
    Thanks for the input and links.

  • Betreff: T440s - Only 1024x768 on external monitor (DVI, Ultra Dock, Win8.1/Win7)

    EDIT NOTE: This message was moved to the top of the thread in order to assist us with an escalation. For all future post and commments please continue posting in this thread.
    One more victim here.  T440s (fully patched, UltraDock, lid closed, external TrackPoint keyboard), Win8.1 (fully patched), HDMI, Acer T232HL touchscreen monitor.
     Volcomtx85's posting (over 50% failure rate in a corporate setting) should warrant some attention.
    Since there is a mix of Win7, Win8 and Win8.1 in the thread (presumably with different drivers), and different modes of monitor connectivity, the two points of commonality in the reports would seem to be BIOS and motherboard hardware.  If so, let's hope it's the BIOS.
    Solved!
    Go to Solution.

    Hello,
    I have a T440s sitting in the Ultra Dock and a Samsung 2343bw hooked up by DVI.
    On both Windows 8.1 and Windows 7 I can only set the resolution of the external screen to 1024x768. When I select  a higher resolution, both internal and external monitor go black for a couple of seconds and when the desktop comes back it's still 1024x768 on the external monitor. I tried the following three drivers:
    1) Deinstall display driver manually and let Win 8.1 pick a driver automatically, version 10.18.10.3318 (03-Oct-2013) gets installed. With this driver, both displays can be set to their native resolution. Unfortunately, the external display goes black once in a while and switches back on after 3 sec. The monitor itself is unlikely to be faulty, since it works well on my T400(+Dock). 
    2) Install driver from Lenovo driver matrix, you'll get 10.18.10.3282. With this driver, the external monitor only displays 1024x768 as described above. 
    3) Get the driver for HD 4400 from Intel website. It doesn't install voluntarily, but there is a workaround: http://www.intel.com/support/graphic...hd+4400+driver
    I tried it and only get 1024x768 on the external display, just as with driver (2). If I connect the monitor by VGA, I get the blinking-error described in (1).
    Hence, the external monitor is not usable, what is highly unsatisfying.
    Can anyone confirm the Issue/problem? Is there a solution?
    thanks,
    niclas
    PS:
    - Bios of T440s is updated
    - I installed the monitor driver from Samsung
    - (1) is not an option in Win 7, only on Win8.1, since Win 7 doesn't find any driver for this card
    - I am happy to provide further information when needed
    - Edit: The screen works finde (DVI&VGA) on my T400 with dock.
    - Edit: If I connect the screen via VGA, no

  • T420 dual external monitors

    Hi,
    Can a T420 with Intel graphics run 2 external monitors at 2560x1600 (via display ports) using a minidoc series 3?
    Thanks,
    -Emran
    Solved!
    Go to Solution.

    It worked, I have experienced it with my own eyes. 2560x1600 on both 30 inch monitors using one Displayport on the mini series 3 docking station and one Displayport on the side of the laptop.
    Thanks :-)

  • Dual / External Monitor Problems

    I have recently purchased a NB200/007 netbook, and wish to use dual monitors (mainly for displaying photos etc on larger screens)
    It came preloaded with Windows 7 starter, after finding out that the Starter edition did not support dual monitor i upgraded to Windows 7 Home Premium, however i am still yet to get this to work.
    When the external monitor is connected, the netbook picks it up and sets up dual monitors, however the external display will not power on (it remains in standby mode) I have tried several different resolutions and also tried to use the external monitor as a single screen by selecting the option to have it as my primary display.
    If anyone has a suggestion of how i could get this to work, i would be greatly appreciative.
    Regards.

    Al-ex,
    Thankyou for your suggestion, however this did not solve the problem.
    It is still like there is no signal getting to the external monitor, even though the netbook itself picks up the monitor.

  • Macbook pro 2010 with 2 external monitors without its main display

    Hi guys, I have been searching for a way to have 2 monitors without macbook's screen itself.
    I'm aware of various adapters through usb and etc.
    But Im thinking, if mac book is only capable of outputing 2 displays, why not outputing main display to one external monitor, instead of the screen on the computer, and the other external montior as a extra one?
    Is it possible ?  so basically 2 external monitor with macbooks screen switched off.
    I don't think apple tv can mirror one and add extra one   can it?
    I just want 2 big monitors instead of 1 big monitor with 1 tiny screen of the laptop.

    Maybe someone with a 2010 model will jump in and correct me, but as you only have a single Mini DsplayPort adapter, I don't think that it's possible to have two external models on a 2010 model. You can only do it on 2011+ via Thunderbolt using Thunderbolt Displays.
    You might want to ask your question in the Apple Cinema Display forum, though. I'm just not aware that it can be done.
    Clinton

  • Using Dual External Monitors as Separate Screens with Late-2011 15" MBP

    Hello,
    I've looked around for answers, but haven't found something that seems to address what I'm looking for.
    I have a late-2011 15" MBP. The Apple TB FAQ page says it can support two external monitors. I currently have it hooked up to one external monitor via mini-to-HDMI.
    I'd like to add a second external monitor, but am not sure the best way to do that. It looks like the Apple TB monitors can do it natively, by daisy-chaining, but I can't afford to purchase two of those monitors. I'd prefer to use a third-party monitor like a ViewSonic 27" or some such, which are significantly more affordable.
    I want to have two actual separate monitors, the way the setup they do with the Apple TB monitors appears – not two monitors that are splitting a single screen between them (as is the case with a few of the splitter-solutions I've seen linked).
    Is there a way to achieve this?
    Thanks!

    I should clarify that I would prefer to do it without using a USB port to do a USB-to-HDMI conversion. I have used USB for a monitor before, and I find the lag virtually unworkable. A daisy-chaining solution, or a native splitter would be ideal.

  • Dual external monitor compatibility

    I tried asking the Geniuses about running 2 external monitors to my new MacBook Pro. They say it can only be done by buying a video card to insert in the expansion slot.
    My question is if anybody else is doing this, and if so, what card would be recommended and how did you configure it?
    I want to run 2 big external monitors and keep my powerbook closed when I'm working in my office.
    They didn't seem to know what to recommend to me at the store since they didn't carry any.

    I believe that it can be done because i've done it before. I have this small external box that plugs into the DVI port and with software it splits and extends the display so i can use 4 displays in total. I got it from Matrox
    This one lets you expand up to two external displays.
    http://shopmatrox.com/usa/products/datasheet.asp?ID=853
    This one lets you expand up to three external displays.
    http://shopmatrox.com/usa/products/datasheet.asp?ID=800
    This is a link to the page with all of the expansion units on it.
    http://shopmatrox.com/usa/products/categories.asp?CategoryID=80&Column=2

Maybe you are looking for

  • My ipod not recognisable by itunes i have tried everything suggested by app

    ok, here is how it started. i wanted album art in my ipod, so i searched the web got all the album art i could and put in each album stored in my itunes. everything was going smoothly when it came to one particular album and from tat time i m having

  • Ios 8 Crash And Laggy!

    hy there! I just updated my phone yesterday to this new ios 8! But once i updated my phone to ios 8, there slightly different about this new ios. Like. lots of my apps Are crash, it also makes my phone slower and laggy, the performance are not tht qu

  • 3D Tween Quality Issues

    Hi all, Has anyone noticed how the 3D tween causes a loss in visual quality of the movieclip?  For example, if I have text within a movieclip, and then put a 3D tween on that movieclip, the text becomes almost blurry (even when the tween is complete)

  • Soundbooth -- Use with Premiere Elements 4?

    I tried Premiere CS3, but decided on Elements 4 for ease of use and price. So far it seems to be a fine product but the limited audio editing capabilities led me, on advice from my son, to try Soundbooth. So far, Soundbooth has done an excellent job

  • Ip address of clients

    dear all, is there a way on apps 11i to know the clients ip address connected to my apps forms i need to know the apps. so is there any package/procuder. thanks fadi