T440p hotkey integration driver fail - win7 x64

Brand new T440p laptop out of the box.
Imaged with preconfigured company Windows 7 x64 image I have used hundreds of times before via MDT.
WDS packaged T440p drivers (downloaded from Lenovo website) are injected as part of the MDT installation process.
All windows updates applied (except for the Lenovo PM Device Driver otherwise the thing no longer reboots or shuts down properly anymore)
BIOS flashed to latest T440p revision.
Run Lenovo System Update to install hotkey drivers and receive the following:
As you can see Win7 x64... driver says no.
Restarted and tried again... error.
Tried downloading the driver manually from http://support.lenovo.com/ca/en/products/laptops-and-netbooks/thinkpad-t-series-laptops/thinkpad-t44...
Same error.
Searched for and downloaded version 5.40
Same error.
I ran Lenovo System Update 2 days ago on another T440p laptop, may have been a slightly different internal spec... not sure but I'm farily sure the driver was named differently in System Update. The driver Installed on that machine fine and functions as intended.
The driver could very well could have been updated since then I guess.
I do also know this is a newer batch of T440p's as the box configuration that it ships in has changed and looks completely different.
What gives?
Moderator comment: Remark(s) contravening the Community Rules removed - profanity / implied profanity.
Solved!
Go to Solution.

Just for giggles I decided to re-image the machine and see if it made a difference.
This time I ran System Update BEFORE any windows update.
Hotkey driver installed just fine.
Maybe there's some windows update incompatibility.
I'm not about to go testing all this stuff so if anyone from Lenovo actually reads these posts, it might be worth investigating...
*shrug* 
Moderator comment: Remark(s) contravening the Community Rules removed - profanity / implied profanity. Keep it clean.

Similar Messages

  • PrE-10 Will not start in Win7(x64)

    I sincerely hope this is not redundant, but I have spent days on this forum looking for answers, but with no luck. I have seen many similar questions, but none of the 'fixes' proposed are relevant, or do not work for me.
    History:
    I have been running PrE-10 since its release, on Win-7(32-bit). I recently had a system crash after installing Windows-8 Beta and had to wipe my hard drive and start from scratch. This time I loaded Win-7 (x64). All my original apps I had stored on an external drive. Some re-installed, some not. I had to re-download PSE-10, and PrE-10 as 64-bit apps.
    PSE-10 and the associated Organizer, work fine as before. PrE-10 however does not start. I get the splash screen, with the options of NEW, OPEN and Organizer. Of these, only Organizer opens. The other two options either bring up a Windows Error box 'Pre-10 has failed to start', or it just sits and does nothing.
    It is not a system limitation as I have far more than the requirements needed to run it and as I said, it worked fine in the 32-bit version, and nothing else has changed (that I have input), so I am baffled.
    As I said, I have done many of the proposed fixes I have seen on the forum, if they are pertinent to my system, and even some that were not. I have now completed the reinstallation of most of my applications, and so far only PrE is causing a problem, but it is very important to me as I am working on a project that requires it.
    I have done a Belarc report, but I do not see a link to upload it. I see links for images, videos, tables and weblinks, but nothing for files (pdf). I will attempt to load it as an image and see if this works. I do not want to post it as text or HTML as it is 7 pages long! (Nope, it does not insert). Perhaps someone can tell me how to upload the file.
    Here is a system summary:
    OS Name
    Microsoft Windows 7 Ultimate
    Version
    6.1.7601- Service Pack 1 Build 7601
    Other OS Description
    64-bit
    OS Manufacturer
    Microsoft Corporation
    System Name
    DOUG-IQ775
    System Manufacturer
    HPQOEM
    System Model
    SLIC-CPC (TouchSMart IQ-775)
    System Type
    x64-based PC
    Processor
    AMD Turion(tm) 64 X2 Mobile Technology TL-58, 1900 Mhz, 2 Core(s), 2 Logical Processor(s)
    BIOS Version/Date
    American Megatrends Inc. 5.15, 11/26/2007
    SMBIOS Version
    2.4
    Windows Directory
    C:\Windows
    System Directory
    C:\Windows\system32
    Boot Device
    \Device\HarddiskVolume1
    Locale
    United States
    Hardware Abstraction Layer
    Version = "6.1.7601.17514"
    User Name
    DOUG-IQ775\DOUG
    Time Zone
    US Mountain Standard Time (AZ)
    Installed Physical Memory (RAM)
       4.00 GB
    Total Physical Memory
       4.00 GB
    Current Available Physical Memory  1.68 GB
    Total Virtual Memory
               8.00 GB
    Available Virtual Memory
               5.32 GB
    Page File Space
               4.00 GB
    Page File
    C:\pagefile.sys
    STORAGE
    USB Flash Memory, s/n 001D0F1FCF2DC8C08406020B, rev 1.00
    Generic Flash Disk -- drive 8, 8GB s/n 03483DBB, rev 8.07
    WDC WD16 00BEVS-60RST0 -- drive 7, 160GB  s/n WDC WD1600 WD-WXC108351497
    Generic CF Reader -- drive 5, s/n 058F12M111B, rev 1.01
    Generic SM/SD/MS Reader -- drive 6, s/n 058F12M111B, rev 1.00
    Century EX35SW4_SB4-A USB Device -- drive 1, s/n 011E011D3B, rev 0100
    Century EX35SW4_SB4-B USB Device -- drive 2, s/n 011E011D3B, rev 0100
    Century EX35SW4_SB4-C USB Device -- drive 3, s/n 011E011D3B, rev 0100
    Century EX35SW4_SB4-D USB Device -- drive 4, s/n 011E011D3B, rev 0100
    HARD DRIVES
    c:/D:(NTFS on drive 0) *
    500.11 GB
    k: (NTFS on drive 7)
    160.03 GB
    w: (NTFS on drive 1)
    250.06 GB
    x: (NTFS on drive 2)
    250.06 GB
    y: (NTFS on drive 3)
    250.06 GB
    z: (NTFS on drive 4)
    250.06 GB
    WDC WD16 00BEVS-60RST0 USB Device [Hard drive K:] (160.04 GB) -- drive 7, SMART Status: Healthy
    WDC WD50 00AAKS-65TMA SCSI Disk Device (500.10 GB) -- drive 0, s/n WD-WCAPW3069745, SMART Status: Healthy
    Drives new – drive encryption
    Memory Modules c,d
    1660.37 Gigabytes Usable Hard Drive Capacity
    914.49 Gigabytes Hard Drive Free Space
    CD/DVD
    TSSTcorp DVDR/RW TS-T632L ATA Device [Optical drive]
    Software Versions & Usage
         i  Adobe Download Assistant
         i  Adobe Help
         i  Adobe Photoshop Elements Editor Version 10.0
       ı i  Adobe Photoshop Elements Version 10.0
       ı i Adobe Premiere Elements Version 10, 0, 0, 0
         i  Adobe Systems Incorporated - Elements Organizer Version 10.0
       ı i  Adobe Systems Incorporated - ElementsAutoAnalyzer Version 10, 0, 0, 0
           Adobe Reader and Acrobat Manager Version 1.5.7.0
        i  Adobe Reader Version 10.1.3.23
         i  Adobe Systems, Inc. - Shockwave Flash Version 11,3,300,270
       ı i  Adobe Updater Startup Utility Version 2.2.0.2 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)
       ı i  Adobe® Flash® Player Update Service Version 11,3,300,270
         i  Amazon MP3 Downloader Version 1.0.0.0
         i  Any Audio Converter Application Version 3, 3, 8, 1
         i  Any DVD Converter Application Version 4, 0, 1, 1
       ı i  Apple Inc. - QuickTime QuickTime 7.7.2 (1680.56)
       ı i  Apple Push
         i  Apple Software Update Version 2.1.3
       ı i  Belarc, Inc. - Advisor Version 8.2g
         i  Canon IJ Driver Uninstaller Version 1.2
         i  Canon IJ Utility Uninstaller Version 1, 3, 0, 0
       ı i  CANON INC. - CNSLMAIN.EXE Version 1, 4, 3, 0
         i  CANON INC. - MP Navigator EX Version 1, 0, 7, 0
         i  CyberLink - CLDownloader Version 2.3.0.2715
         i  CyberLink - DZM Version 2.05.3206
       ı i  CyberLink Corp. - PowerDirector Version 9.0.0.2930
       ı i  Google Chrome Version 21.0.1180.75
       ı i  Google Update Version 1.3.21.103
       ı i  GSpot Codec Information Appliance Version 2, 7, 0, 1
       ı i  Igor Pavlov - 7-Zip Version 9.20
       ı i  INR Desk Version 2.0.0.0
       ı i  Microsoft Corporation - Internet Explorer Version 9.00.8112.16421
       ı i  Microsoft Corporation - Windows Installer - Unicode Version 5.0.7600.16385
            Microsoft Corporation - Windows® Search Version 7.00.7600.16385
       ı i  Microsoft Malware Protection Version 4.0.1526.0
         i  Microsoft Network Inspection System Version 4.0.1526.0
       ı i  Microsoft Security Client Version 4.0.1526.0
         i  Microsoft ® Windows Script Host Version 5.8.7600.16385
       ı i  Microsoft® .NET Framework Version 2.0.50727.4927
         i  Microsoft® .NET Framework Version 3.0.6920.5011
         i  Microsoft® .NET Framework Version 4.0.31106.0
       ı i  Microsoft® CoReXT Version 7.250.4232.0
       ı i  Microsoft® Windows® Operating System Version 12.0.7600.16385
         i  OpenOffice.org 3.4 Version 3.04.9590
         i  OpenOffice.org Base Version 3.04.9590
         i  OpenOffice.org Calc Version 3.04.9590
         i  OpenOffice.org Draw Version 3.04.9590
       ı i  OpenOffice.org Impress Version 3.04.9590
         i  OpenOffice.org Math Version 3.04.9590
         i  OpenOffice.org Writer Version 3.04.9590
         i  OpenOffice.org Writer(Web) Version 3.04.9590
       ı i  Orbitdownloader.com - Orbit Downloader Version 4, 1, 1, 1
         i  PlotSoft L.L.C. - PDFill PDF Editor with FREE PDF Writer and PDF Tools Version 9.0.0.9
         i  PlotSoft LLC - PDFill FREE PDF and Image Writer Version 9.0.0.9
       ı i  Realtek - ReStart Application Version 500, 1001, 719, 2007
       ı i  Realtek - RtlService Application Version 700, 1004, 1207, 2009
       ı i  RichVideo Module Version 2.0.1.5417
         i  Safer Networking Limited - Secure Shredder Version 1.9.0.0
         i  Safer Networking Limited - Spybot - Search & Destroy Version 1, 5, 2, 0
         i  Safer Networking Limited - Spybot - Search & Destroy Version 1, 6, 0, 30
         i  Safer Networking Limited - SpyBot-S&D Version 1, 6, 2, 0
       ı i  Safer Networking Ltd. - Spybot - Search & Destroy Version 1, 6, 0, 0
         i  SmartSound Sonicfire Pro Version 5.7.1
         i  Sun Microsystems, Inc. - Java(TM) Platform SE 6 Version 6.0.0.105
         i  The Audacity Team - Audacity® Version 1,3,13,0
    Can anyone help me get this app going... please!!
    Thanks in advance!
    DN

    This is frustrating! I just answered this post at length, but when I posted it it disappered!
    Guess I have to start over and hope for the best!
    Is that an HP laptop?
    No, it is a desktop. However it is an HP 'hybrid'  all-in-one, and uses a lot of laptop hardware and software to keep the low profile case.
    -HP Fingerprint/Password conflict http://forums.adobe.com/thread/911575
    I read this and it does not apply to my system.
    Otherwise, unless I missed it, I do not see mention of your graphics/video card brand/model and driver number
    This is why I asked how to upload the Belarc report! Too much info to post.  Here is the Graphics info.
    Name
    NVIDIA GeForce Go 7600
    PNP Device ID
    PCI\VEN_10DE&DEV_0398&SUBSYS_2A40103C&REV_A1\4&1BC86A40&0&0020
    Adapter Type
    GeForce Go 7600, NVIDIA compatible
    Adapter Description
    NVIDIA GeForce Go 7600
    Adapter RAM
    256.00 MB (268,435,456 bytes)
    Installed Drivers
    nvd3dum,nvd3dumx.dll
    Driver Version
    7.15.10.9804
    INF File
    oem12.inf (nv_NV3x section)
    Color Planes
    Not Available
    Color Table Entries
    4294967296
    Resolution
    1440 x 900 x 59 hertz
    Bits/Pixel
    32
    Display
    Nvidia Flat Screen [Monitor] 19.25" vis
    Driver
    c:\windows\system32\drivers\nvlddmkm.sys (7.15.10.9804, 5.73 MB (6,006,696 bytes), 1/25/2007 6:43 PM)
    Check the ATI or nVidia or ??? website to be sure you have a current driver
    Another interesting story, that! Nvidia/GeForce does an auto detect and correctly identifies the graphics card, and sends me to a link to upgrade the driver. The driver page says it is for Vista x64 and Win7 x64 (even its long name has 'win7-x64' in it). I download and attempt an install, and it comes back with "you are running Windows 7 64-bit. This driver is for Vista only. Installer closing." I went back and tried 4 other Win-7 x64 drivers, all reported the same thing, even though they state on the site they are for Win7 x-64. I then went to the Device Manager and tried to update the driver, but it reported using 'the most current driver available'. So I uninstalled the current Nvidia driver, which put me into VGA mode. I then went to Windows Update and did a search for updates. It found a missing Nvidia driver and called it 'Nvidia Driver for Win7 x64'. I downoaded and installed it and my system returned to normal 1440 x 900 display. I checked the driver info and it is the same driver as the original, including the release date, so apparently the original driver was in fact x64 compatible, and there does not appear to be an updated driver for it.
    Also, for laptops... if that is what you have
    -http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modul es.html
    -http://forums.adobe.com/thread/1001579
    It is not a laptop, but as it uses many laptop softwares and hardware, I will check these and see if they help. I will post the results.
    -Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
    There are no DISPLAY options in my BIOS setup. There is also no update available for the BIOS from HP
    Thanks for the help.
    DN

  • WLAN driver fails to install on G580 Windows 7 x64 with error "BCM4313: Can not find setup file"

    Summary:
    I have installed Windows 7 Ultimate x64 on my G580.  Everything is working fine except the WLAN driver fails to install with the error "BCM4313: Can not find setup file".
    Details:
    I bought lenovo G580 with Windows 8.  Since my parents are not comfortable with the learning curve of Win 8, I successfully downgraded to Windows 7 Ultimate x64.  Everything is working fine but my WLAN card is not recognized because of lack of driver.
    The lenovo parts look-up page says I have broadcom WLAN card - CBT BCM4313 MOW HMC WLAN
    I looked at lenovo driver downloads site and tried following driver files for Windows 7 and both of them failed to install with the following error.  I tried installing other WLAN drivers also but they won't even install as required hardward is not there.
    Error -  "BCM4313: Can not find setup file"
    Drivers Tried:
    - http://support.lenovo.com/en_US/downloads/detail.p​age?DocID=DS028105
    - http://support.lenovo.com/en_US/downloads/detail.p​age?DocID=DS028208
    Any help about how to get past this error will be appreciated.  The previous Widnows verison (Windows 8) is still on my hard-drive as windows.old folder.  Let me know if I can copy a specific file from there.
    Thank you.
    BJS
    Solved!
    Go to Solution.

    Download this driver bcm4313
    Start setup and extract the files.After that go to star menu/control panel/system/device manager.There you probably find out that network adapter driver is missing.Choose it and click with right mb for drop menu to show up.Select properties then Driver/Update Drivers...Select to load driver from computer hard drive and choose the path where extract files is.Default path is main partion C: and search for directory named Driver.
    And yes...you get "Can not find setup file" error but dont worry.Files needed to instal driver are extract fine.

  • MDT 2012 Win7 x64 capture fails - boot loop

    Hi everyone,
    I'm pretty new to MDT and having a problem capturing a Win7 x64 reference image.
    It seems to start out fine doing the Sysprep and so on, but then it has to restart the computer and after that it goes into a boot loop. After this, I have been forced to format and reinstall Win7 on the computer. This picture shows what it loops through
    in about 20 seconds - and it shows nothing else than what's on these pictures :)
    www.jaded.dk/boot_loop.png
    I have been Google'ing alot, but can't find any post with the same issue, since most other get an error msg which I dont.
    Here is some info about the setup.
    I'm deploying the task sequence locally using these commands:
    net use * \\mdtserver\DeploymentShare$ /user:domain\username
    cscript \\mdtserver\DeploymentShare$\Scripts\LiteTouch.wsf
    Server running MDT 2012 U1 - Win server 2008 R2, 64 bit
    The laptop on which i'm trying to capture the ref img is a HP Elitebook 8470p. It is fully patched with windows updates and I have installed a few apps like Office 2010, flash player, reader etc.
    The "Rules" on my MDT Workbench is like this:
    [Settings]
    Priority=Default
    Properties=MyCustomProperty
    [Default]
    OSInstall=Y
    SkipCapture=NO
    SkipAdminPassword=YES
    SkipProductKey=YES
    SkipComputerBackup=YES
    SkipBitLocker=YES
    SkipTimeZone=YES
    SkipLocaleSelection=YES
    InputLocale=0406:00000406
    KeyboardLocale=0406:00000406
    KeyboardLocalePE=0406:00000406
    SystemLocale=0406:00000406
    UILanguage=0406
    UserLocale=0406:00000406
    My task sequence looks like this:
    www.jaded.dk/task_seq.png
    I don't know where to find a log of the capture, to get a hint of what has gone wrong.
    Hope you can help me out here :) And please let me know if you need more info.
    Thanks
    Morten

    Thank you both for answering.
    ccatlett_sogeti:
    I didn't seem to have Windows Deployment Services installed on my server. I just installed it and added WinPE boot files as bootimage according to this guide: http://blogs.technet.com/b/manojnair/archive/2011/11/23/exploring-mdt-2012-beta-2-part-6-of-10-integrating-mdt-2012-beta-2-with-windows-deployment-services-wds.aspx
    Is that correct?
    Keep in mind that I don't use PXE at the moment, if that makes any difference :)
    David:
    I will try to add SLShareDynamicLogging. I set it like this - hope it's correct:
    SLShareDynamicLogging =\\MDTSERVER\DeploymentShare$\Logs\%ComputerName%

  • Where to download driver for the SD BT2 Bluetooth adapter for Win7 x64?

    Hello,
    where can I download drivers for the SD BT2 Bluetooth adapter for Win7 x64?
    Thank you.

    I agree with bluecat.
    BT SD card is not on the market for years now and this device is not supported anymore so I think you will not be able to find driver to get it work with Win7.

  • Z87-G45 Gaming not able to install Win7 x64 with Samsung 840 EVO

    I have a brand new:
    i5 4570
    MSI Z87-G45 Gaming
    250GB Samsung 840 EVO
    1x 8GB Corsair ValueRam DDR3 1600
    I got everything hooked up properly, but I am not able to install Win7 x64 through an USB pen drive (Kingston Datatravel 32GB USB3) I have a proper  official and Legit MSDN ISO, formatted by the Win7 USB tool from MS itself.
    Note that i do not have an optical device (DVD) installed so I cannot use it 'the old way'.
    Bios settings are okay, everything is recognized
    USB Legacy - Kingston Datatraveler
    HDD Legacy - Samsung 840 EVO
    Win7 setup loads properly; but before I can select the Harddrive / SSD to install Win7 on I get prompted that additional (3rd party) drivers are needed to proceed. The volume is not recognized. This happens 9 out of 10 times. In the 10% cases I do get the option to format the SSD and/or create partitions. However, installation fails after all, cannot load or find file ...
    What I've tried so far:
    Switch out the SATA cables and power cables
    Switch through the various SATA ports on the MB 1 through 6
    Tried UEFI and UEFI/Legacy (UEFI doesn't seem to work at all)
    Update UEFI to V 1.50
    All the above result in the case mentioned.
    I have succesfully installed the SSD in an other PC, using the same pen drive and ISO and it worked like a charme, thus ruling out that the SSD, pen drive or image is corrupt.
    Even when I switched out the SSD after Win7 setup has succesfully copied, unpacked and installed all the files (doing this on the other machine where it works like a charm). Then switching it to the MSI Z87...it fails; starting the setup procedure right from the start, like nothing was ever written on the SSD...
    Finally i turned to Win8, and guess what, it installed without any glitches on the MSI Z87
    What am I missing here, I would really want to install Win7 instead of Win8
    Forgot to enable / disable something in the UEFI? I really don't know, google doesn't give much information on this specific problem (SSD is recognized properly by the BIOS / UEFI as far as I can tell)
    The only thing I have not tried out so far is updating the Samsung SSD firmware to the 1.0 version which has been release 3 days ago...
    Any clues, tips, hunches??

    Quote from: Bernhard on 25-October-13, 18:33:41
    Did you disable Secure Boot in the BIOS? If not, then Win7 won't load.
    Hmmm not sure, thanks for the reply, will have to look into that later today!
    I didn't change it from the default setting I think, unless it is part of the Win8 features in the UEFI. All where disabled by default, and I kept them disabled.
    Where is Secure Boot listed in the UEFI, and any idea wether it is enabled by default?
    ::EDIT::
    Found it in some screenshots, I cannot recall from the top of my head wether it was enabled or disabled, allthough my gutt feeling says it already is disabled.
    http://cdn.pcper.com/files/imagecache/article_max_width/review/2013-05-31/09-MSI_SnapShot_23.gif
    http://cdn.pcper.com/files/imagecache/article_max_width/review/2013-05-31/10-MSI_SnapShot_24.gif
    Nice overview of the entire UEFI btw: http://www.pcper.com/reviews/Motherboards/MSI-Z87-GD65-Gaming-Motherboard-Review/BIOS-Features-continued

  • PS6b1: "The GPU Sniffer Crashed" Win7 X64

    PS CS6B1 reports "Photoshop detected an error in your display drive" and disables GPU settings when running on Win7 x64 system with Asus EAH 6970 (AMD Radeon 6970) graphics card.  I verfied that the latest Asus/AMD drivers are installed and working properly.
    Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00) x64
    Operating System: Windows 7 64-bit
    Version: 6.1 Service Pack 1
    System architecture: Intel CPU Family:6, Model:10, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 4
    Logical processor count: 8
    Processor speed: 3200 MHz
    Built-in memory: 24566 MB
    Free memory: 18591 MB
    Memory available to Photoshop: 22238 MB
    Memory used by Photoshop: 60 %
    Image tile size: 128K
    Image cache levels: 4
    The GPU Sniffer crashed on 3/24/2012 at 8:27:58 AM
    Display: 3
    Display Bounds:=  top: 146, left: 2560, bottom: 1226, right: 4480
    Display: 2
    Display Bounds:=  top: 178, left: -1920, bottom: 1258, right: 0
    Display: 1
    Display Bounds:=  top: 0, left: 0, bottom: 1440, right: 2560
    No video card detected
    Serial number: Tryout Version
    Application folder: E:\programs\Adobe Photoshop CS6 (64 Bit)\
    Temporary file path: E:\scratch\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      E:\, 1.82T, 1.70T free
    Required Plug-ins folder: E:\programs\Adobe Photoshop CS6 (64 Bit)\Required\
    Primary Plug-ins folder: E:\programs\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
    Additional Plug-ins folder: not set
    Installed components:
       A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112  
       ACE.dll   ACE 2012/01/18-15:07:40   66.492997   66.492997
       adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
       AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0  
       AdobeOwl.dll   Adobe Owl 2012/02/09-16:00:02   4.0.93   66.496052
       AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
       AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1642  
       AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
       AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
       AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
       adobe_caps.dll   Adobe CAPS   5,0,10,0  
       AGM.dll   AGM 2012/01/18-15:07:40   66.492997   66.492997
       ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56  
       aif_core.dll   AIF   3.0   62.490293
       aif_ocl.dll   AIF   3.0   62.490293
       aif_ogl.dll   AIF   3.0   62.490293
       amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
       ARE.dll   ARE 2012/01/18-15:07:40   66.492997   66.492997
       AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
       AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
       Bib.dll   BIB 2012/01/18-15:07:40   66.492997   66.492997
       BIBUtils.dll   BIBUtils 2012/01/18-15:07:40   66.492997   66.492997
       boost_date_time.dll   DVA Product   6.0.0  
       boost_signals.dll   DVA Product   6.0.0  
       boost_system.dll   DVA Product   6.0.0  
       boost_threads.dll   DVA Product   6.0.0  
       cg.dll   NVIDIA Cg Runtime   3.0.00007  
       cgGL.dll   NVIDIA Cg Runtime   3.0.00007  
       CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
       CoolType.dll   CoolType 2012/01/18-15:07:40   66.492997   66.492997
       data_flow.dll   AIF   3.0   62.490293
       dvaaudiodevice.dll   DVA Product   6.0.0  
       dvacore.dll   DVA Product   6.0.0  
       dvamarshal.dll   DVA Product   6.0.0  
       dvamediatypes.dll   DVA Product   6.0.0  
       dvaplayer.dll   DVA Product   6.0.0  
       dvatransport.dll   DVA Product   6.0.0  
       dvaunittesting.dll   DVA Product   6.0.0  
       dynamiclink.dll   DVA Product   6.0.0  
       ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
       FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
       filter_graph.dll   AIF   3.0   62.490293
       hydra_filters.dll   AIF   3.0   62.490293
       icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       image_compiler.dll   AIF   3.0   62.490293
       image_flow.dll   AIF   3.0   62.490293
       image_runtime.dll   AIF   3.0   62.490293
       JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
       libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)  
       libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0  
       LogSession.dll   LogSession   2.1.2.1640  
       mediacoreif.dll   DVA Product   6.0.0  
       MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
       msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       pdfsettings.dll   Adobe PDFSettings   1.04  
       Photoshop.dll   Adobe Photoshop CS6   CS6  
       Plugin.dll   Adobe Photoshop CS6   CS6  
       PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383  
       PSArt.dll   Adobe Photoshop CS6   CS6  
       PSViews.dll   Adobe Photoshop CS6   CS6  
       SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
       ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
       tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
       tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
       TfFontMgr.dll   FontMgr   9.3.0.113  
       TfKernel.dll   Kernel   9.3.0.113  
       TFKGEOM.dll   Kernel Geom   9.3.0.113  
       TFUGEOM.dll   Adobe, UGeom©   9.3.0.113  
       updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
       WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
       wu3d.dll   U3D Writer   9.3.0.113  
    Required plug-ins:
       3D Studio 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Accented Edges 13.0
       Adaptive Wide Angle 13.0
       ADM 3.11x01
       Angled Strokes 13.0
       Average 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Bas Relief 13.0
       BMP 13.0
       Chalk & Charcoal 13.0
       Charcoal 13.0
       Chrome 13.0
       Cineon 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Collada 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Color Halftone 13.0
       Colored Pencil 13.0
       CompuServe GIF 13.0
       Conté Crayon 13.0
       Craquelure 13.0
       Crop and Straighten Photos 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Crop and Straighten Photos Filter 13.0
       Crosshatch 13.0
       Crystallize 13.0
       Cutout 13.0
       Dark Strokes 13.0
       De-Interlace 13.0
       Dicom 13.0
       Difference Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Diffuse Glow 13.0
       Displace 13.0
       Dry Brush 13.0
       Eazel Acquire 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Embed Watermark 4.0
       Entropy 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Extrude 13.0
       FastCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Fibers 13.0
       Film Grain 13.0
       Filter Gallery 13.0
       Flash 3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Fresco 13.0
       Glass 13.0
       Glowing Edges 13.0
       Google Earth 4 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Grain 13.0
       Graphic Pen 13.0
       Halftone Pattern 13.0
       HDRMergeUI 13.0
       IFF Format 13.0
       Ink Outlines 13.0
       JPEG 2000 13.0
       Kurtosis 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Lens Blur 13.0
       Lens Correction 13.0
       Lens Flare 13.0
       Liquify 13.0
       Matlab Operation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Maximum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Mean 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Measurement Core 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Median 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Mezzotint 13.0
       Minimum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       MMXCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Mosaic Tiles 13.0
       Multiprocessor Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Neon Glow 13.0
       Note Paper 13.0
       NTSC Colors 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Ocean Ripple 13.0
       Oil Paint 13.0
       OpenEXR 13.0
       Paint Daubs 13.0
       Palette Knife 13.0
       Patchwork 13.0
       Paths to Illustrator 13.0
       PCX 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Photocopy 13.0
       Photoshop 3D Engine 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Picture Package Filter 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Pinch 13.0
       Pixar 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Plaster 13.0
       Plastic Wrap 13.0
       PNG 13.0
       Pointillize 13.0
       Polar Coordinates 13.0
       Portable Bit Map 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Poster Edges 13.0
       Radial Blur 13.0
       Radiance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Range 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Read Watermark 4.0
       Reticulation 13.0
       Ripple 13.0
       Rough Pastels 13.0
       Save for Web 13.0
       ScriptingSupport 13.0
       Shear 13.0
       Skewness 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Smart Blur 13.0
       Smudge Stick 13.0
       Solarize 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Spatter 13.0
       Spherize 13.0
       Sponge 13.0
       Sprayed Strokes 13.0
       Stained Glass 13.0
       Stamp 13.0
       Standard Deviation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Sumi-e 13.0
       Summation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Targa 13.0
       Texturizer 13.0
       Tiles 13.0
       Torn Edges 13.0
       Twirl 13.0
       U3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Underpainting 13.0
       Vanishing Point 13.0
       Variance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Variations 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Water Paper 13.0
       Watercolor 13.0
       Wave 13.0
       Wavefront|OBJ 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       WIA Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Wind 13.0
       Wireless Bitmap 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       ZigZag 13.0
    Optional and third party plug-ins:
       Camera Raw 7.0
    Plug-ins that failed to load: NONE
    Flash:
       Mini Bridge
       Kuler
    Installed TWAIN devices: NONE

    What display driver version do you have?
    Try this:  Go to the ATI web site (really, it's the AMD web site), and locate and download/install the latest Catalyst package for your hardware and OS (if memory serves, it's 12.3).
    -Noel

  • P45 Platinum IEEE1394 drivers for Win7 x64

    I just reinstalled my PC with P45 Platinum mainboard and everything installs fine with the drivers from the MSI website, however there is no driver for IEEE1394 controller there.
    I installed Win7 x64 now, before I installed WinXP and at the time of that installation it installed fine.
    I am not using the IEEE1394 controller at the moment but there is a exclamation point in the device manager I want to get rid of.
    Can anyone point me to the driver, thnx.

    In windows 7 there's no Firewire driver needed it should automatically install it as already integrated. Is it already installed and exclamation mark on it like it isn't working correctly or unknown device?

  • W700 Win7 x64 blue screen after screen replacement

    Hopefully somebody has a solution for this issue. Recently I sent my W700 in for a screen replacement and when I received it back, I installed my HD (Win7 x64 Ultimate) and the system would blue screen.
    I tried all the different start up options and all failed with a blue screen
    The blue screen goes away so fast I cannot see what it is telling me
    Sometimes as it is attemption to boot I will see a screen that states "The boot selection failed because a required device is inaccessible"
    I attempted a repair and see the following (the repair fails)
    Windows Boot Mgr
    ID 9DEA862C-5CDD-4E70-ACC1-F32B344D4795
    Startup option will be added
    Name: Win Recovery Env (Recovered)
    Path: Recovery\103c3ec-e604-11de-a4f7-8c999d1797b9\Winre.wim
    Windows Device: Partition-E476835 MB)
    A copy of the current boot configuration data will be saved as D:\Boot\BCD.Backup.0001
    I click Repair & Restart, the system blue screens when it boots
    In that I was using my "production disk" I switched to the previous Win7 x64 Ultimate drive I had in the system - same failure and results with this drive as well
    I then switched to the Vista drive that was in the system when I received it 0 same failure and results with this drive as well
    I then installed a new 500GB drive and started a new build - this worked but I'm having trouble getting Outlook x32 2010 to work with my previous Outlook.pst file
    I've restored the MBR and the 100MB partition on one of my Win7 drives using the MBR and 100MB partition from the new working drive - still I get the blue screen.
    I need one of two solutions (as I see it)
    Get my production Win7 x64 drive working (this is the drive that blue screens)
    Get the new HD with the new Win7 build working with Outlook.
    I've talked to the support center they don't know what is going on but offered to ship the W700 back and look at it. If they could not resolve the issue they would reimage the HD. This is not an acceptable solution. I already know that if I rebuild the HD it will work. 
    jgt1942

    Your computer is experiencing problems with the installed updates. Do check existing updates list and remove all recently installed updates. There is a good possibility that some updates wouldn't work properly or they are not properly installed. For diagnostic information please visit here.
    1. Click Start, type "installed updates" in the Search Box.
    2. Press ENTER.
    3. Right click an update, select Uninstall.

  • MacbookPro 5,4 - Failure(s) installing Win7 x64 using Bootcamp (aka help!)

    I'm running a Macbook Pro 5,4 and am having a hard time figuring out why Win7 x64 keeps failing during the install process. I'll start with the failures, then add what I've attempted to fix the problem.
    Following the Bootcamp guide exactly, I get through the initial copying, expanding and updating process just fine. The system reboots but never makes it into windows. Instead I get the, "Windows failed to start. A recent hardware or software change might be the cause." Sometimes it lists a driver (the list is long and seemingly random). Sometimes it lists the kernel (ntoskrnl.exe).
    My attempts at a solution:
    1. The recommendation from MS is to boot to the install disk and run a start-up repair. When I do this, it returns the message, "Startup Repair cannot repair this computer automatically". Dead End.
    2. Because it looks like a possible corruption issue I first tried the cheap route of installing from another disk - in fact I've borrowed two other Win7 Pro x64 disks (all 3 disks I've used are legitimate) and have had the same problem, so I'm ruling out the media.
    3. The system is less than two months old but it could still be the HDD so I ran a check in OS X and it finds no problems. I've replaced the drive twice and the problems with installation remain consistent.
    I've run a check on the memory as well - again, no problems detected.
    So far I've completed 9 attempts, with fresh partitioning and formatting and have yet to successfully install Windows 7 on this system. In contrast, it was a simple process to install the 32 bit version on my wifes MacBook Air. Am I missing something obvious?

    Found a workaround, to sum it up, it's pretty much my dead internal superdrive (as for unbootable USB, that's still a mistery). What I did was moving the HDD to my 2012 MBP and install from there. The problem is now that since I installed it on another machine (with ofc all different hardwares) I got blue screen whenever I tried to start Windows7 (in 2007 MBP after moving the HDD back there).
    Next step will be replacing the superdrive on 2007 MBP with 2012's. Or if someone got a suggestion like installing the drivers via target disk mode etc, please advice

  • T61 DVD/CD-RW drive fails to read and crashes

    Hello Everyone, I hope people still visit this area of the forums!
    I've highlighted and bolded the symptoms to make them easier to find.
    I recently purchased a T61 6457-C15 on eBay, and have been in the proccess of setting up and customizing it to suit my tastes. When I recieved the laptop, it looked as though Windows had been restored to original factory state, plus some free software, so I proceeded under that assumption. First I used Windows Update to download all the updates that it could find including IE8. I wanted to have an anti-virus program running on my computer before I used a browser to access the internet. I ran IE8 and went straight to the Microsoft Security Essentials website and downloaded the Install program. At this point I tried to remove the pre-installed and expired Norton Internet Security using the built-in uninstall, but it failed. A message box popped saying that I needed to put the Norton installation disc in the CD-ROM drive so that the uninstall program could find a Norton support file. My computer did not come with any discs, but my mothe had bought Norton 2008, so I took that disc and put it in the drive. The drive started spinning right away, and the uninstall program found the file it was looking for in a few seconds. The support file directed me to the Norton website to get their removal tool, which removed Norton from my system in short order. Afterwards, I ran the Microsoft Security Essentials install program and got MSE running on my computer before doing anything else.
    Then I went to the Lenovo support website and had it auto-detect my system. That took me to the support page for my system, where I went to the "Downloads and Drivers" page. I downloaded Access Connections and ThinkVantage Toolbox for Vista 32-bit (my OS is Vista Business 32-bit). I then used Lenovo System Update to retrieve all the updates it deemed neccessary from Lenovo, including those for itself and system components, both software and firmware. There were 35 or more updates suggested, and I trusted the software, so I started downloading them all. I'm not sure, but I think that a DVD/CD-RW drive update was included in the list, but I can't remember if it was auxiliary software, drivers or firmware. After Lenovo System Update was convinced that it had all the neccessary updates, I downloaded Revo Uninstaller and set about removing uneccassary and unwanted programs from my computer and trimming the startup list. I did not touch any Windows or ThinkVantage components, and I searched each program online, so I'm sure that I did not delete or disable any drivers or system files, or anything from Lenovo. I mainly removed Apple products and non-functional software from my system, including an integrated camera driver (my system does not have an integrated camera) and third-party programs that were already missing files or otherwise inoperable when I got my computer. Up to this point I had been using a gigabit ethernet connection to download software; I had not used the DVD/CD-RW drive except for the one time I specified earlier.
    Now that I had my system set up to my liking, including personalization and power settings, I started to install my first program: Command & Conquer the First Decade from a DVD-ROM. When I put the disc in the drive and closed it, it took a few seconds for the drive to spin up, and once it did, it was constantly running at high speed and I could hear the reader constantly moving back and forth quickly. After a few minutes the disc's install menu finally appeared, so I clicked on the install button. I waited several minutes but nothing happened, so I tried to view the contents of the drive by going to My Computer > DVD/CD-RW drive (D, right clicking and selecting explore from the menu options. When I did that, the address bar of the My Computer window started to fill up with a dark gray progress bar and said "loading (D", I think with the drive or disc name after it. After it took several minutes to fill completely, nothing happened. I waited a few more minutes to see if anything would change, (nothing did,) I clicked on the X button in the top right corner of the window to close it. A few minutes and clicks later, the My Computer window was labeled as (not responding), and the window itself became grayed-out. I started Task Manager and tried to close the My Computer window, but the entire Windows Desktop disappeared along with it, saying that it would attempt to restart. Even Task Manager became non-responsive and quit after closing My Computer. After a few minutes of staring at my background (and nothing else), I ejected the disc, and Windows Desktop reappeared immediately and acted as if nothing had ever been wrong.
    I checked Device Manager, but neither the DVD/CD-RW drive nor any of the ATA controllers were flagged; in fact they all said they were working properly with up-to-date drivers. I ran the ThinkVantage Toolbox diagnostics on the drive using a data CD, a music CD and a different DVD-ROM, but in each case the drive failed the tests and a message box popped-up saying that the discscould not be read because they were scratched or there was a hardware problem. I checked the discs both before I put them in and after I took them out, and they were not scratched; also, all of the discs are publisher-manufactured from a software or music company. I restarted my computer, booted the Rescue and Recovery option and Ran PC-Doctor from there. I ran the same drive read tests with the same failure results. The entire time the drive was behaving the same way it had when it first failed to read a disc. Next I removed and cleaned the drive both inside and out with a can of compressed air; I also cleaned the ultrabay itself. Finally I tried fixing the problem with Microsoft Fix It, but when it automatically ejected the drive and i put a disc in, the disc became trapped in the drive and Windows froze up like before. I had to restart Windows twice (once with a BSOD) in order to get the disc out. When the disc was removed the computer went back to normal operation once again.
    Please help me, my DVD/CD-RW drive is a Matshi ta UJDA775, my operating system is Windows Vista Business and my T61's model number is 6457-C15. I have tried all the troubleshooting fixes and none have worked. I have tried updating drivers and using diagnostic software and they have not worked. I have tried disabling drag-to-disc burning and it has not worked. I have treid removing and cleaning the drive and that has not solved my problem. I did notice that the driver for the "Intel(R) ICH8M-E/M SATA AHCI controller" is the only related driver that can be rolled back, so maybe that might fix it. I'm also wondering if a firmware change caused this, and if so, if there is any way I can undo that. The only other fix I've heard of that I haven't tried is editing the registry, but I'm hesitant to do that. I haven't tried booting from the CD drive because I have no bootable CDs and I'm worried that my computer might get stuck in that mode. I'm hoping that someone can tell me what I can do to try to fix this problem, preferably without wrecking my computer. Thank you for taking the time to read my post.
    P.S. Just adding a note; I went through both the Microsoft and Lenovo Update histories and the only related updates I could find were: ThinkPad BIOS update, Easy Eject utility, Intel Matrix Storager Manager driver for Windows (32-bit), and maybe one of the two Intel Chipset Support for Vista updates. I tried rolling back the AHCI driver but it had no effect.
    Solved!
    Go to Solution.

    Well, my problem is fixed, and here's how. I had some trouble figuring out how to contact Lenovo technical support; online options directed me to the IBM support website, which was clearly designed for businesses. Selecting the "Call technical support" option on the Lenovo support website and then choosing my country gave me a 24/7 hotline number. After waiting about five minutes on hold, a nice young fellow by the name of "Tyrese" answered (I maybe misspelling his name), but the connection was so bad that we could barely hear each other. Although he semed eager to help, when I told him my problem the first things he suggested were simple, like cleaning the drive, However, when I told him all of my efforts, described above, to fix the problem myself and read him the log from the Rescue and Recovery diagnostic program, after he checked the error codes against his computer database he promptly replied that the only fix was to send out a new drive. I was happy to have gotten such a successful resolution to a support call in less than fifteen minutes; apparently, all the work I had done trying to solve the problem myself had paid off in a way. Unfortunately, although I had tried to spell out my address for him, some of it got left off of the address label, which caused some trouble in receiving the new drive. Once I got it, I installed it using the uninstall & remove (old drive), shut down, start up, insert & install (new drive) method that I referenced earlier in this topic. I've been using the new drive since then without any trouble, so I guess that the only fix was to replace the drive. Also, I noticed that the new drive was a Hitachi, perhaps a T400/410 or T500/510 Ultrabay Slim drive, which should help me avoid the problems that other users were having with the older Matshi-ta drives. I hope this description helps anyone else having a problem with the optical drives on the T61/61p.

  • ITunes (Win7 x64) is no longer opening after the latest version update

    iTunes (Win7 x64) is no longer opening after the latest version update - I have attempted an un/reinstall - can anyone offer other suggestions?
    I am running Windows 7 64-bit, and am trying to reinstall the 64-bit iTunes from the iTunes website.  I previously have had this working for the last few years with no major issues, the Apple Software Updater has been pestering me for some time so I finally got it to update.  However now iTunes will not start, if I select the icons nothing happens.  There are no iTunes applications running in the background in Task Manager either.
    I look forward to your suggestions.
    Thanks,
    James.

    1. First check if this file APSDaemon.exe is the problem here.
    Close your iTunes.
    Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
    Now open itunes and see if it is working?
    If that works, to prevent having to do the same process everytime you restart Windows, go to. START button, type in
    MSCONFIG
    Hit ENTER
    Click STARTUP Tab, Uncheck "Apple Push", click OK.
    Restart Windows.
    2. If that fails, refer to following article to remove SC Files
    http://support.apple.com/kb/TS2363
    3.  If that fails, repair or reinstall your Quicktime.  START / CONTROL PANEL / PROGRAMS N FEATURES / hightlight QUICKTIME and click REAPIR.

  • Win7 x64 Installation on late 2007 MBP+Mountain Lion

    Dear All,
    As a long time mac and bootcamp user, I've never expected to face this problem but I've been trying to do this for 3 days.
    I'm having trouble installing bootcamp (win7 x64 ultimate) into my late 2007 MBP (2.4GHZ core 2 duo)
    Pretty much use the bootcamp assistant from start to finish, tried using install dvd and create boot-able USB stick (by changing the plist.info on the bootcamp assistant package, as my MBP isn't supported.)
    With USB stick created by bootcamp assistant, my mbp just simply won't read it even during startup and rEFit startup.
    Sometimes it goes into the blank state and says no bootable device.
    With win7 install DVD, whenever I use built in superdrive, it got ejected after 2-3 mins,
    When I tried using Samsung external dvd burner/player, in place of who-knows dead superdrive, it went into blank screen with only a dash blinking (just like when the first time you start a PC) then disc stop spinning after awhile.
    Burned few copy DVDs from extracted ISO (from the orginial install disc) and came up with same results
    Recent changes, current condition,etc:
    - Changed the stock 160gb harddrive into WD500GB blue scorpio.
    - Installed fresh OSX Mountain Lion downloaded from App Store (was Lion) and updated everything.
    - Had the very same win7 on bootcamp 3 installed on snow leopard few years ago and keeping it even with Lion (the exact same dvd!)
    - Superdrive cannot be used to write but can read normally (install DVD shows up normally in OSX environment.)
    - With USB created by bootcamp assistant, rEFit shows "legacy booting" and can't find files inside the USB
    - Installation is working flawlessly on my 2011 iMac.
    - Can still boot into bootcamp on old internal stock hdd (using external case)
    - DVDs burned are Verbatim DVD-R and Sony DVD-R, both are top brands.
    - Burner I tried to burn them are 2011 iMac's, 2012 MBP's, Samsung external dvd burner (all fail to boot on my 2007 MBP)
    - Tried the method to create usb stick on windows 7, still can't boot.
    - Burned DVD using Nero and alcohol 120% on windows 7, still fail.
    I wonder if you guys can help me, I'm a designer and I really need to install Corel Draw on bootcamp so I can work on some CDR files on my MBP. And other stuff such as office's finance control program that can only work under windows.
    Thanks in advance!

    Found a workaround, to sum it up, it's pretty much my dead internal superdrive (as for unbootable USB, that's still a mistery). What I did was moving the HDD to my 2012 MBP and install from there. The problem is now that since I installed it on another machine (with ofc all different hardwares) I got blue screen whenever I tried to start Windows7 (in 2007 MBP after moving the HDD back there).
    Next step will be replacing the superdrive on 2007 MBP with 2012's. Or if someone got a suggestion like installing the drivers via target disk mode etc, please advice

  • Photoshop CS4 (64bit) & Win7 x64 problem fixed

    I just wanted to post this to help anyone who might be having this problem.
    Here's the problem. When you use Photoshop's lasso tool, you can press ALT at the same time, and it would turn into a magnetic lasso tool that you can use to make straight lines.
    Well, what would happen is that I would be making a selection, and then suddenly the screen (both screens, as I'm using a dual screen setup) would flicker, and the selection would complete by itself, and I would be SOL, as, obviously, the selection is not what I wanted.
    I could replicate this without fail. I'm halfway done with making a perfect selection, and bam!, this crap happens, and I have to start all over again. It happens ALL the time, no matter what Photoshop setting I used. Photoshop was completely updated, and all my device drivers (video card, mouse drivers, etc.) were all at their latest. So I started looking outside Photoshop, as I was thinking it might be another software problem.
    After much trial and error, I narrowed it down to Task Manager. I had Task Manager running in my tray. If I closed Task Manager (not minimize, close), restarted Photoshop, and made my selection using the lasso tool, the issue would go away, but would come back randomly.
    The fix? Run Photoshop CS4 in Vista compatibility mode. This solves the problem completely.
    I know a lot of you will probably say that you have Photoshop CS4 running flawlessly on Win7 x64, but I have 3 computers, each with completely different configurations, one of them being a laptop, that I was able to replicate this on. Once I ran Photoshop in Vista compatibility mode on each computer, the problem was completely solved.
    So I hope this helps anyone who has run into this problem.

    I confirm he is a blond wanna be.
    function(){return A.apply(null,[this].concat($A(arguments)))}
    Hudechrome wrote:
    It won't work for me. I never used Vista.
    (I will neither confirm or deny I am a blonde!)
    Thanks for sharing.

  • Premiere CS5 (win7 x64) won't recognize my Mini-DV camcorder.

    I have Premiere Pro CS5 installed on a Windows 7  64-bit system.
    When I try to Capture, I keep getting the error message:  "Can't Activate Recorder. Try Resetting Camera."
    the whole set-up worked fine on my XP system with Premiere Pro 1.5.
    Extra info:
    The Mini-DV camcorder is a Panasonic NV-DS33   (but personally I think it has nothing to do with my camera because I have seen so many threads online regarding this issue and no-one has any decent answer!)
    the firewire cable is fine because it works on my old XP computer.
    in premiere, if I change the camera to an HDV, then suddenly I can CONTROL the camera, but I can't capture)
    Windows 7 (x64 bit) recognizes the Camcorder in the Device Manager (and says it is working properly).
    I have tried several other DV capturing softwares (Stoik, Scenalyzer, WinDv). I have even tried my old Premiere Pro 1.5 on my 64-bit system.. and NONE OF IT WILL CAPTURE MY CAMCORDER!
    This is very frustrating. I need my new win7 (x64) Premiere CS5 to capture successfully. I have spent a LOT of money on this new system. What on earth is the problem?
    (i saw one thread on a similar issue regarding a 32-bit installation of Win 7, and it is marked as ANSWERED! but in my opinion, (from the amount of forums on many other sites) this issue is definitely not fixed.
    is there any update to Premiere CS5? or a workaround? or anything else I should know?
    PS: it is not an option for me to keep using my old computer to Capture video and then transfer it to my new system. i am passing my old system on to another person.
    many thanks
    Marc
    [email protected]

    I agree that the "Legacy" FW driver solution should be a stickie, or FAQ. Since Win7-64 was released, it has caused no end to the grief. Maybe Jeff, or Todd will have a better solution to getting the word out.
    It was Harm Millaard, who brought that to MY attention, and he's posted it to many, many threads. In nearly every case, it's solved the issue.
    Good luck, and thanks for reporting Colin's success,
    Hunt
    PS - per your suggestion, I just published this "fix" in the Tips & Tricks sub-forum for PrElements.

Maybe you are looking for

  • How to print list of Files?

    I have a list of Files. I would like to print their names. I tried as below: But I get an exception as below: Can anyone tel me what the problem is? private void createCheckBoxes(List javaFiles) {         int count = javaFiles.size();         System.

  • Upgraded to Firefox 4.0.1 and can no longer use my Norton Toolbar. How do I go back to my old and usable Firefox?

    I utilize Norton Toolbar 4.6 and Firefox reports it is disabled because it is incompatible with Firefox 4.0.1. Since I utilize this functionality far more than any increased functionality in the new Firefox how can I go back to the previous version I

  • Category in synchronous send in BPM

    Hi all,            I am doing a BPM and in that I need to make asynchronous send.I have used a synchronous Abstract interface for that but In container I cant understand what i need to specify in category as I am not finding the synchronous msg in ab

  • Interview question in cts

    hai freinds, I have attended interview in conizant last week.there i have question like this difference between formula and calculated key figures? i have answered fro this like this Ans: formula is local calculated key figure is global he asked me a

  • PI7.0 INSTALLATION

    Hi While configuring POST INSTALLATION ACTIVITIES.I tried to open the "go.bat" and "configtool.bat " files to start the J2EE VISUAL ADMINISTRATION  but getting an error shown in below: \usr\sap\PI7\DVEBMGS10\j2ee\admin>"C:\j2sdk1.4.2_16;\bin\java" -s