T440p: internet disconnects when using BT mouse

I have the 2x2 Thinkpad wireless card and when I use my bluetooth mouse the internet disconnects and I get a "limited connection". I have the latest drivers for everything.

Hi iphetamine and Jakoob,
Remember that this is users helping users here, moderated by volunteers like me. Although there is some Lenovo presence, they can't patrol the entire community. They do try to help with some of the broader issues.
Any possibility you're in a marginal WiFi reception area, and Bluetooth interferes with it?
I don't work for Lenovo. I'm a crazy volunteer!

Similar Messages

Internet disconnecting when using WPA

About 3 weeks ago my wireless connection started dropping on a regular basis. I would be on the web, and then i would not be able to access any pages. Everytime, I would have to power cycle the router and the wireless would reconnect....then about an hour later, same issue.
I contacted Verizon tech suppot and he could not connect to my router because I was using WPA for security instead of the default WEP. The tech told me that Verizon was trying to push out some updates or something and that they could not because I was not using THEIR recommended security settings of 64 bit WEP.....he said I would have to revert to WEP or I would continue to have problems.
I reverted back to WEP and have had no problems at all. Everytime I try to put WPA back, I have the same issue.
Anyone else having this issue?
Personally, if this is true, I'm not going to be very happy about this. So either the tech was an idiot or Verizon is being **bleep** by not allowing people to use a different security setting.

thats what i was thinking too. I'll have to check the setup for WPA, I have the Westell 9100 router, so I'm not sure it has the same setup as the ActionTec.
Thanks for the info. I'll check tonight/tomorrow and post my findings.

Ichat, AIM, & Adium all frequently disconnect when using Air

Ichat, AIM, & Adium all frequently disconnect when using Airport. I use a Linksys Wireless Router with an Airport extreme card. When directly connected to the router, I have no problem. Using a PC with Windows XP, AIM operates fine. Safari and Firefox work fine, although sometimes I receive errors connecting to pages, when I try again no problem. Using any of the chat programs, I lose connection, but then can reconnect. After a few times, the AOL servers will prevent login.
I use COMCAST Cable internet service. My wireless router uses WEP encryption. I would switch to an AIrport Base station, but doubt it would correct the problem.
I have had this problem previously, but it corrected itself. now it is making chat programs unusable.
Any ideas?

Hi John,
By default Linksys units normally have the IP address of 192.168.1.1
Is this true for both your units or have you changed one of them ?
You may only find this out if you connect directly to the Modem one.
Also you have not said if only one of them is doing DHCP.
Example pic 3 on this page. This shows this device as getting it own contact IP address by DHCP (like from your ISP). Further down the page in the pic it shows the device is also acting as a DHCP server to the local net.
If your router is set up like this it could be getting an IP address usng DHCP like this device shows and that would tend to mean that the Modem is acting as a DHCP server as well.
If both devices still have the default IP addresses you will have conflicts, which probably explians the problems you have.
Ralph

Some RST are seen during TCP disconnection when using SSL connection

Some RST are seen during TCP disconnection when using SSL connection
It is expected that the disconnection sequence for a secure connection to be as follow:
client ************************* server
--- alert (warning, close notify) --->
<--- alert (warning, close notify) ---
in any order;
and then:-
--------------- FIN, ACK ------------>
<----------- FIN, ACK ---------------
------------------ ACK ----------------->
Instead of the sequence described above, the TCP connection for a secure connection is closed with an RST.
For instance, Wireshark capture shows that an SSL+SASL TCP connection is closed in the following manner:
client ************************** server
--- alert (warning, close notify) ---->
---------------- FIN, ACK ------------>
<--- alert (warning, close notify) ---
<----------- FIN, ACK ---------------------
------------ RST -----------------> *(This RST message should be investigated, an ACK message was expected)*
Server: OpenLDAP: slapd 2.4.23
Client: (java version "1.6.0_16")
import javax.naming.*;
import javax.naming.directory.*;
import javax.naming.ldap.InitialLdapContext;
import java.util.Hashtable;
import javax.naming.ldap.InitialLdapContext;
import javax.naming.ldap.StartTlsRequest;
import javax.naming.ldap.StartTlsResponse;
class Client {
private static final String DEFAULT_INITIAL_CONTEXT_FACTORY = "com.sun.jndi.ldap.LdapCtxFactory";
public static void main(String[] args) {
//SSL
try {
System.setProperty("javax.net.ssl.keyStore", "c:\\\keystore");
System.setProperty("javax.net.ssl.keyStorePassword", "adminadmin");
System.setProperty("javax.net.ssl.trustStore","c:\\\keystore");
System.setProperty("javax.net.ssl.trustStorePassword","adminadmin");
// Set up environment for creating initial context
Hashtable env = new Hashtable(11);
env.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.ldap.LdapCtxFactory");
// Must use the name of the server that is found in its certificate
env.put(Context.PROVIDER_URL, "ldap://1.2.4.4:16415");
env.put(Context.SECURITY_AUTHENTICATION, "simple");
env.put(Context.SECURITY_PRINCIPAL, "cn=manager,dc=operator,dc=com");
env.put(Context.SECURITY_CREDENTIALS, "password");
env.put(Context.SECURITY_PROTOCOL, "ssl");
// Create initial context
InitialLdapContext ctx = new InitialLdapContext(env, null);
// Close the context when we're done
ctx.close();
catch(Exception e)
e.printStackTrace();
Is it a bug ? Can I expect to have a patch for this issue?
Regards,
Olivier
Edited by: 975464 on 6-Dec-2012 11:21 AM

I agree it should be an ACK not an RST but it doesn't really matter. The connection is closed, and as neither the client nor the server has any pending data it is benign. Worth investigating in a later JRE.

Detect Client Disconnect When using RTMP

Hello,
I hava a Java Server and Clients using RTMP. I've read somewhere that I can detect instantly client disconnection when using RTMP. However I cannot find an example code (in Java) that demonstrates this functionality? Can you help me please?

I am not sure how your client looks, however the lient connect using NetConnection under the hood which spits NetStatusEvents's and you can listen to them ...
C

Ichat/internet disconnecting when lid is closed

Hello,
Whenever i'm online using ichat or I doing anything internet-related, when i shut the cover of the computer everything signs off....i get disconnected from the internet completely and kicked off of ichat/aim. how can i shut this off?
Thank you!

Closing the lid puts the computer to sleep, which closes all of its network connections except for the ability to wake it up by sending it a magic packet over the Ethernet interface.
(28178)

Applications disappear when using external mouse

Using windows 7 professional on a brand new T410 (2537-RZ5).
Happens only when using an external mouse and mouse is stationary for random periods of time (seconds or minutes).
Problem: all applications (internet explorer, office, etc) will suddenly disappear (sometimes only leaving outside border of application) to reveal desk top - does not matter which application i have open or whether there is one or multiple. Desktop color is correct but instead of solid color it has a diagonal ribbed effect to the color. Applications will reappear moment I move the mouse.
Happens with variety of external mouse - does not happen if using laptop mousepad (i.e. no plug in). All latest windows and lenovo updates installed as far as I know but has not fixed bug. Has happened again just while writing this message - quite frustrating.
Please help if you can.

I noticed a similar phenomenon and found that my mouse cursor was landing over the sensitive spot on the right side of the task bar which harbors the "Show Desktop" Aero feature. Check it out.
W540 20GBCTO, Ultra Dock, W520, 4270CTO, W510, 4318CTO; (2)T500, 2081CTO; Y560, 064657U, Y530, 405166U; T61p, 6465CTO, A31p, and L2461x Multi-touch Monitor, Mini Dock Plus Series 3

FMS auto disconnects when using a class

I am trying to implement a very simple class that will create
an instance of the NetConnection object and connect to the FMS
server. However, the client will connect then immediately
disconnect when the swf is published. My code is as follows...
FLA Code:
import _includes.*;
var obj_conn:Conn = new Conn();
obj_conn.connect();
Conn.as Code:
class _includes.Conn
public function Conn()
public function connect()
var nc:NetConnection = new NetConnection();
nc.connect("rtmp://localhost/classtest");
Please note that the connection works fine if I just create a
NetConnection variable on the FLA itself in the timeline. Any
suggestions/help would be appriciated!

it think this is happen because you use local variable : your
variable is delete at the end of connect() so your NetConnection
will be closed in the same time.
try this:
Conn.as Code:
class _includes.Conn
private var objNetCon:NetConnection;
public function Conn()
public function connect()
this.objNetCon = new NetConnection();
this.objNetCon.connect("rtmp://localhost/classtest");
}

Internet disconnects when trying to connect a vpn on a different user account on the same computer

Im trying to have one user account with my real ip address and another user account on windows 8 with a vpn connection. Everytime i switch (i dont logout i just lock the user) then try to connect a vpn on the other user account the internet disconnects
on the other user account. It's like it wants to change my entire internet connection to use the vpn instead of having a seperate connection on each user account. is there a way around this or am i stuck having to use two laptops? I also unchecked
Use default gateway on remote network on the vpn.

Hi,
Try to temporary disable firewall to see if the same issue occurs.
Leo Huang
TechNet Community Support
This is definitely not the answer. Why is it marked as the answer?

Anchor tags are not working on internet explorer when using touch devices

Hi,
I have a simple anchor tag like <a href=http://www.google.com></a>
Using a mouse there is no problem but when I use a touch device (windows 8.1/windows Phone 8.1), all that will happen when people touch it is that the link will be highlighted.
I don't want to highlight it, I just want the link to open.
Double clicking the link will zoom in the page. It takes several attempts tapping the link to actually open it... this is VERY frustrating.
How can I remove this highlighting non-sense?
I found an article that seems to indicate this was done on purpose:
http://blogs.msdn.com/b/ie/archive/2013/07/31/ie11-touch-browsing-for-today-s-web-and-beyond.aspx
It's a total failure if you ask me and it is very frustrating to use my site on a touch device.
Anyone has any idea on how to make links behave normally?
Best Regards,
Peter

seems that it is something in SharePoint that is causing this behavior
So you would probably be better off posting in a Sharepoint forum. They would be more familiar with all the products involved. This is an example where newsgroup cross-posting would be useful but it does not exist in forums.
Otherwise, sounds like you are going to have to find the implementation involved and then devise a workaround for it. Is there a publicly accessible example of the coding used for what you are seeing? You could use the Developer Tools (or View
Source) to try to look at it yourself.
For a guess it may involve Active Scripting. If the link can be used even if Active Scripting is disabled you could achieve that result simply by changing the security level or zone that the site is regarded with.
BTW with your example link above I have the opposite problem. I can't touch it to try to select it without launching it. Here's a workaround for that: select a word before the link, use the selection's wheels to extend it to include
the link, then reduce it to include only the link, then, I can use press and old on the selection without launching the link. (In fact since I always leave press and hold disabled I used my pen with its right-click barrel button to see the selection's
menu though if I use my pen's barrel button, I don't need to make the selection to see just a reduced menu which would be sufficient to use the link.) In any case, I imagine that just as I can do a press and hold on the selected text of
the link without launching it you may just as easily be able to do a press and hold to see the selection's menu to allow you to launch its link.
HTH
Robert Aldwinckle

MacBook internet disconnects when I connect BB10 with USB

Everytime I connect my phone to my laptop via the usb (supplied with orignial device) the internet on my MacBook disconnects and I lose my VPN connection.
It seems the Z10 creates a new 'Blackberry' Network connection which overrides my computer settings. If I disable this connection it is simply recreated the next time I connect my Z10 and my internet disconnects and I lose my VPN connection.
Any idea how I can prevent this? I could do with a setting to switch this behaviour on or off rather than the Z10 assuming I want to use it to connect.

Hey 8lettersuk,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
I have a few questions before I get started:
1. Are you using Cisco AnyConnect as the VPN client on your Mac?
2. What version of BlackBerry 10 are you currently running? Go to Settings>About to find this information.
I look forward to your reply.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

K3011w - How disable the touchpad when using USB mouse?

Is there a way to disable the touchpad on the docking keybd when using a USB mouse? It is a real pain typing along and be in the middle of sentence some where else on the page.

hi whippetguy,
Thanks for Posting,
   The touchpad on the dock uses a Windows driver and does not have any special Software to Disable it via shortcut,
How I found to go around on what you need is
With the tablet on the dock with no USB mouse yet
                  Press (Windows key+x) and choose device manager on the list
                        On Device Manager window open mice and pointing device and rightclick disable
This should disable the dock touchpad and Now you can plu in your USB mouse,
Before you unplu your USB mouse after use, Go to device manager again and Enable the device you disabled.
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Pages scroll extremely slowly when using my mouse scroll wheel, regardless of the settings I have for autoscrolling or smooth scrolling.

It scrolls about 1 line for every 5 notches I turn the scroll wheel.
I have to either use the scroll bar or the arrow keys. All other programs like Internet Explorer and Word, Photoshop, etc. scroll normally with the scroll wheel. Currently I am using the mouse on a Wacom Intuos 4, but the same issue occurs with the pen using the "pan" function and also with a run of the mill corded microsoft intelimouse.
Also, I'm having this issue on 2 computers, one lenovo laptop, Win 7 professional 64 bit, and a Lenovo desktop with Windows 7 ultimate 64 bit.

It scrolls about 1 line for every 5 notches I turn the scroll wheel.
I have to either use the scroll bar or the arrow keys. All other programs like Internet Explorer and Word, Photoshop, etc. scroll normally with the scroll wheel. Currently I am using the mouse on a Wacom Intuos 4, but the same issue occurs with the pen using the "pan" function and also with a run of the mill corded microsoft intelimouse.
Also, I'm having this issue on 2 computers, one lenovo laptop, Win 7 professional 64 bit, and a Lenovo desktop with Windows 7 ultimate 64 bit.

Network disconnects when using youtube on ipad air

network disconnects and turns it self off when using youtube app on ipad air

Hello paulm250m
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Wi-Fi disconnects or signal strength is less than expected
Move closer to the Wi-Fi router (access point).
Check for sources of potential interference.
Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
Best of luck,
Mario

Forms 5 Runtime crashes when using wheel mouse

Hi,
We get Invalid Page Faults when using a wheel mouse in Forms
(Forms 5.0.6.8.0). When scrolling up to the first record the
message 'At first record' occurs. Then we get a ORA-00001 error
(!?), followed by the invalid page fault and forms runtime
crashes. Other actions (scrolling down, scrolling up, but not to
first record) work fine. I suppose there exist a patch to solve
this problem, but I wasn't able to find it. Could someone please
help me ?
Thanks.
Koen

Crashing is normal Forms 5 behavior. Why should a wheel mouse
make it better? :-)
If you use Patch 10 (get it on metalink) for D2K Forms 5 on
Windows (and a good mouse driver), this problem is almost gone.
But be warned:
Patch 10 introduces other more serious bugs (serious printing
problems with HP printer, and such funny things as mysterious
disappearing items items in large forms ... we stopped the
rollout of Patch 19 half the way) , and these bugs
will never be fixed 'cause D2K R2.1 is desupported since
december 1999.
So choose your fate.
HTH Schlo
BTW: There is a Patch 11, but it is not worth downloading.

T440p: internet disconnects when using BT mouse

Similar Messages

Maybe you are looking for