T440p, WIndows 7: Fingerprint Reader Fails on First Attempt to Log In, Works on Second After Delay

I have a T440p with Windows 7 Pro. Except on rare occasions, I am unable to log into Windows with my first swipe across the fingerprint reader. The green light is on when I do the first swipe and it immediately goes off and stays off for around 15 sesconds, during which time another swipe does nothing. Then the green light will return and a second finger swipe will log me on.
Any suggestions on fixing this would be appreciated. It's made using the fingerprint reader for login impractical, because it's faster to just go to the password screen and log in that way. Thanks.
Thinkpad T440p: i7-4800MQ | Crucial 16GB DDR3-1600, 9-9-9-24 | Samsung 840 Evo 500GB SSD | Intel 7260 Dual-Band AC Wireless | Windows 7 Pro
Thinkpad X120e
Thinkpad T61p
Solved!
Go to Solution.

I do see a several second delay before the fingerprint reader green light comes on after the login screen appears, but it's no where near as long as the delay I was previously seeing between the first failed swipe and waiting for the light to come on again. The new driver is a great improvement and make the fingerprint reader work as I recall when I first purchased the T440p--though possibly a bit slower to light up after the login screen appears. It would be great to see the fingerprint reader light come on more quickly after the login screen appears, but that's a minor thing compared to the failure on the first swipe.
Thanks again for giving us the opportunity to try this driver out. So far, after a day of use and several times coming out of sleep, I haven't had any failed swipes.
Skoop wrote:
sog, some feedback on that driver:
The installer runs but doesn't give any prompt that it has finished. I was waiting for something to show, after the progress bars, but it just quits. Before I restarted, I checked the driver version and saw the new one, so I figured that was all that was going to happen. Driver is v.285, dated 1/29/15.
Restarted the PC and then put it to sleep (deep sleep mode/Intel Rapid Start). First swipe does indeed work to login thereafter.
But: It takes longer for the FP reader light to come on now. I think it's that same 15 seconds mentioned above. With the previous driver, the scanner light would come on almost right away with the login screen, but the first swipe wouldn't do anything. Once the light came on again--that period of seconds, the swipe would work.
With this new driver version, I think that what's changed is that the light simply doesn't come on until whatever is going on in the background has completed. So, in effect, getting a desktop takes the same amount of time, but with only a single swipe. --Which isn't a complaint that a login should be able to be effected more quickly with the FP scanner. Perhaps it can't. Just reporting how it works now.
journeyman, your take?
Thinkpad T440p: i7-4800MQ | Crucial 16GB DDR3-1600, 9-9-9-24 | Samsung 840 Evo 500GB SSD | Intel 7260 Dual-Band AC Wireless | Windows 7 Pro
Thinkpad X120e
Thinkpad T61p

Similar Messages

I have 2 hotmail accounts. They worked fine the first month or so, now about 20 seconds after I sign on, it goes to an send message screen but I cannot send. When I go back to inbox, it resets to the send screen again. HELP.

I have 2 hotmail accounts. They worked fine the first month or so, now about 20 seconds after I sign on, it goes to an send message screen but I cannot send. When I go back to inbox, it resets to the send screen again. HELP.

Here you can see how you can setup your Hotmail accounts in the Mail App on the iPad; http://convert-dvd-ipad.com/dvdipad/setup-hotmail-microsoft-exchange-ipad-2/

T430s fingerprint reader fails in both windows 7 (64 bit) and ubuntu.

Hi,
I have 4 months with my new t430s, and so far so good, I created a partition to instal ubuntu and I was able to have the finger print reader work in it.
The last week I left the laptop's battery to drain completely, but I did not notice it... I tried to wake it up but my fingerprint would not turn it on... I plug the charger on and the laptop started working again but now, my fingerprint log on was disabled, I had to type my pasword to log in...
From that moment on, this issue consistently occurs in both windows & and ubuntu...
The funny thing is that I can still turn on the laptop with my finger, the fingerprint reader indicator leds are working but the device only works to start the laptop. I have tried to delete the fingerprint data from teh BIOS, but I can still start the laptop, so I dont think this clear data command on the BIOS is doing anything...
I have tried re-installing the device, updating the driver, etc and nothing works, the device appears as unnavailable on the windows biometric devices section of my control panel, so I cannot enroll any new finger print using the lenovo fingerprint software since I get these 3 errors in any attempt:
E7210005 Cannot enroll user.
E7210005 Cannot update passport.
E7210005 Cannot find fingerprint sensor device.
Any ideas?
Is there a way to reset my device from the BIOS so al its data and its state is cleared?
Thanks!
Roberto O.

rortegah
I have heard of this exact situation one other time, where fingerprint sensor stops working properly after PC unexpectedly turns off due to low battery. I think your fingerprint sensor has malfunctioned and needs replacement under warranty. Currently, I do not know of any other solution.
But can you please tell me:
1. how many fingers do you have enrolled?
2. do you use any BIOS passwords (such as administrator password, power-on password, or HDD password)?

Fingerprint reader failing with internal error - 0x800106BB

My fingerprint reader worked once I put the proper software in. But only once. The second time I tried to get in, I got the following: "An internal error occurred (bpwb: bp-wb-dpi-ed-wbeba (800106BB)" When I went onto the internet and searched on that error, it appears to be a known problem with Windows 7 (fixed in win8) with the following description: "Not enough RPC threads". Is this a hardware problem or a software problem? Lenovo is telling me to return my Thinkpad E540 to be fixed. Since I am going on a cruise in 20 days and planned to bring this laptop with me, I'm concerned.

Hi Sharath,
I have selected all of them, clicked on publish, the I got a message saying "choose an ITS for publishing"
Using the message in performance assistant,
In se80, Utilities->settings, On the ITS tab under Publish choose the ITS server,
However, here the only options are
1. on all defined sites,
2. on selected site, print
3. to local directory.
Here, I have selected on all defined sites.
Got the message "Object published successfully; site All Defined Sites"
How to proceed further?
Thanks,
Vishi
Edited by: sap.technical on Mar 9, 2010 6:15 AM

T61 with Windows 7: Fingerprint reader not working

I downloaded and installed the fingerprint reader software for my T61 (7659-D22) with Windows 7. At the login screen I see the "Scan your finger" option, but none of my fingerprints is recognized, so I log on with my password.
In Windows I get the Fingerprint popup inviting me to enroll fingerprints. Three are shown as enrolled already (carry over form WinXP, no doubt), all of which I had tried unsuccessfully at the login screen. I tried enrolling additional fingerprints, but the scans do not register at all.
How do I solve this problem?
Solved!
Go to Solution.

Hi Z300M,
Are you using doman account? If you are then please go to
Control Panel > Hardware and Sound > Biometric Devices > Change biometric settings
And tick "Allow users to log on to a domain using their fingerprints"
Fred
T61 + X201i

Under Windows 7 - Fingerprint Reader Ignored After Standby Resume

I thought this was perhaps a platform-specific issue. But both on my ThinkPad T61 running Windows 7 Ultimate 32-bit and my new ThinkPad T510 running Windows 7 Enterprise 64-bit, whenever I resume from standby, any finger swipe against the fingerprint reader is ignored.
Note - I am not using the rather large Lenovo fingerprint driver package because I don't want the bloat. Just want a very basic, Ctrl+Alt+Delete password prompt replacement.
Does the "Registry patch to change IDLE IRP timing by Fingerprint reader driver for Windows Vista" need to be installed under Windows 7 (http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67245)?

i didn't know the lenovo fingerprint driver package was more than just a very basic, Ctrl+Alt+Delete password prompt replacement? (at least not that i noticed)
T400s - 2815RW1 + Win7 Ultimate
Don't pm me for help! That's what the forum is for. Also, Google's nicer than me. Ask him.

IPhone 5S fingerprint reader fails after iOS 7.0.3 upgrade

Hi all.
I recently updated my iPhone 5S to IOS 7.0.3 and ever since then, I am struggling to unlock my phone every time. I press the home button and then I used to just leave my finger on the button and it would unlock. Now it just doesn't seem to recognise my finger is even there.
I lift my finger off and put it on again and nothing. I lift my finger off and actually press the button again and leave my finger there and sometime it unlocks, sometimes it doesn't. It doesn't even say "try again" it simply doesn't recognise I'm trying to unlock it. I'm ready to chuck the bloody thing at the wall!!
Has anybody else experienced this problem since updating to IOS 7.0.3?

I bought my iPhone 5s a few days ago. It came with 7.0.3. It works 100% of the time, but people were having trouble with it when they went from 7.0.2 to 7.0.3. A lot of times, when doing an upgrade, the fingerprint scanner problem can be solved with some simple troubleshooting skills:
Troubleshooting steps:
First, if you have never rebooted your phone after the update, it helps to reset your phone. This is just pressing and holding the home button + power button until the apple logo comes on the screen (the phone will power off and then on. When Apple logo appears, you can let go of both buttons).
If fingerprint scanner is still hit and miss, you should redo your finger prints by go to settings->general->touch id & passcode->touch id. Delete all saved fingerprints (swipe to the left and press delete). Add fingerprints again.
If it still doesn't work or still hit and miss, you can always reinstall the ios. This can be googled. For me, it is too much trouble, so I go to the next step..
Finally, if that's still no good, you can always take it back to the apple store. The warranty on it is a full year so it is free for them to just look at it and tell you if it's a hardware problem. I know cuz I have replaced my iPad, iPhone, and even my macbook this way. No, I don't do it on purpose, but apple products has flaws too. Especially if it is a hardware problem, I need it replaced - and since it is still under warranty, it is replaced for free. So I don't hesitate to stick it in their face. Well, don't be mean about it though. Just say it like it is without the attitude and they will do what they can to help you fix it.
Tips: when you replace your phone, they may or may not give you a "refurbished" phone. That's the only thing I don't like about replacing my apple things. BUT since iPhone 5s is so new, the chances of you receiving a refurbished phone is quite slim... Or so I was told. So don't wait.

The fingerprint reader on my HP Pailion dv7 will not work in Firefox 4, but worked fine in earlier versions.

The fingerprint reader uses DigitalPersona 5.0.0.4490 extension. Firefox 4.0 says this is loaded and active. However, fingerprints cannot be used to log in from Firefox 4.0.
I reloaded Firefox 3.6.16 and everything automatically began working properly.

I see you started another question thread - https://support.mozilla.com/en-US/questions/888892 - so I guess your problem isn't resolved.
If it is trying to print to an XPS file, your printer isn't selected as the destination for print. You need to select you printer in the Printer - Name box. See the screenshot.

Gnome login fails at first attempt

Hi guys,
I'm having a strange problem here.
When I boot my notebook and try to login into Gnome, it constantly fails at the first attempt.
So I click on my username, enter the (correct) password and nothing happens. I cancle it with 'esc', click on the username again, enter the password and I'm in.
This also occurs when I lock my screen.
Any ideas why Gnome tries to troll me and how to fix it?
Thanks.
Specs:
Macbook pro 5,5
GDM 3.10.0.1
GNOME Shell 3.10.4
Any more information needed? Let me know.

I did a checkup von /var/log/gdm/:0.log but didn't find anything that might give me an hint
Here is the output of the logfile
X.Org X Server 1.15.0
Release Date: 2013-12-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.12.5-1-ARCH x86_64
Current Operating System: Linux antartica 3.13.6-1-ARCH #1 SMP PREEMPT Fri Mar 7 22:47:48 CET 2014 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=95744744-5122-437b-82a7-6eb85b3a6448 rw quiet
Build Date: 09 January 2014 08:47:24AM
Current version of pixman: 0.32.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 24 17:11:42 2014
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Automatically adding GPU devices
(WW) The directory "/usr/share/fonts/OTF/" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(--) PCI:*(0:2:0:0) 10de:0863:106b:00b9 rev 177, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00001000/128, BIOS @ 0x????????/131072
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension Present
Initializing built-in extension DRI3
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
(II) NVIDIA GLX Module 334.21 Thu Feb 27 13:54:04 PST 2014
Loading extension GLX
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
(II) NVIDIA dlloader X Driver 334.21 Thu Feb 27 13:34:35 PST 2014
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(++) using VT number 1
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.15.0, module version = 1.0.0
(WW) Unresolved symbol: fbGetGCPrivateKey
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.15.0, module version = 1.0.0
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling 2D acceleration
(II) NVIDIA(0): Display (Apple Color LCD (DFP-0)) does not support NVIDIA 3D
(II) NVIDIA(0): Vision stereo.
(II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
(II) NVIDIA(0): NVIDIA GPU GeForce 9400M (C79) at PCI:2:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 262144 kBytes
(--) NVIDIA(0): VideoBIOS: 62.79.67.00.00
(--) NVIDIA(0): Valid display device(s) on GeForce 9400M at PCI:2:0:0
(--) NVIDIA(0): Apple Color LCD (DFP-0) (boot, connected)
(--) NVIDIA(0): DFP-1
(--) NVIDIA(0): DFP-2
(--) NVIDIA(0): Apple Color LCD (DFP-0): Internal Single Link LVDS
(--) NVIDIA(0): Apple Color LCD (DFP-0): 165.0 MHz maximum pixel clock
(--) NVIDIA(0): DFP-1: Internal Single Link TMDS
(--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
(--) NVIDIA(0): DFP-2: Internal DisplayPort
(--) NVIDIA(0): DFP-2: 480.0 MHz maximum pixel clock
(**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
(**) NVIDIA(0): device Apple Color LCD (DFP-0) (Using EDID frequencies has
(**) NVIDIA(0): been enabled on all display devices.)
(==) NVIDIA(0):
(==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) NVIDIA(0): will be used as the requested mode.
(==) NVIDIA(0):
(II) NVIDIA(0): Validated MetaModes:
(II) NVIDIA(0): "DFP-0:nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 800
(--) NVIDIA(0): DPI set to (112, 112); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(--) Depth 24 pixmap format is 32 bpp
(II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
(II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) NVIDIA(0): configuration option may not be set correctly. When the
(II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
Loading extension NV-GLX
(==) NVIDIA(0): Disabling shared memory pixmaps
(==) NVIDIA(0): Backing store enabled
(==) NVIDIA(0): Silken mouse enabled
(**) NVIDIA(0): DPMS enabled
Loading extension NV-CONTROL
Loading extension XINERAMA
(II) NVIDIA(0): [DRI2] Setup complete
(II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
(--) RandR disabled
(II) Initializing extension GLX
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.15.0, module version = 2.8.2
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event3"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event1"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
(II) config/udev: Adding input device Lid Switch (/dev/input/event0)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Sleep Button (/dev/input/event2)
(**) Sleep Button: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Sleep Button'
(**) Sleep Button: always reports core events
(**) evdev: Sleep Button: Device: "/dev/input/event2"
(--) evdev: Sleep Button: Vendor 0 Product 0x3
(--) evdev: Sleep Button: Found keys
(II) evdev: Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
(II) config/udev: Adding input device HDA NVidia Headphone (/dev/input/event5)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding drm device (/dev/dri/card0)
(II) xfree86: Adding drm device (/dev/dri/card0)
setversion 1.4 failed: Permission denied
(II) config/udev: Adding input device PC Speaker (/dev/input/event4)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
removing GPU device /sys/devices/pci0000:00/0000:00:03.5/drm/card1 /dev/dri/card1
(II) config/udev: Adding drm device (/dev/dri/card1)
(II) xfree86: Adding drm device (/dev/dri/card1)
removing GPU device /sys/devices/pci0000:00/0000:00:03.5/drm/card1 /dev/dri/card1
(II) config/udev: Adding input device Lid Switch (/dev/input/event0)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: removing device Power Button
(II) evdev: Power Button: Close
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event1"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
(II) config/udev: removing device Sleep Button
(II) evdev: Sleep Button: Close
(II) config/udev: Adding input device Sleep Button (/dev/input/event2)
(**) Sleep Button: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Sleep Button'
(**) Sleep Button: always reports core events
(**) evdev: Sleep Button: Device: "/dev/input/event2"
(--) evdev: Sleep Button: Vendor 0 Product 0x3
(--) evdev: Sleep Button: Found keys
(II) evdev: Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
(II) config/udev: removing device Power Button
(II) evdev: Power Button: Close
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event3"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
(II) config/udev: Adding input device PC Speaker (/dev/input/event4)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA NVidia Headphone (/dev/input/event5)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
removing GPU device /sys/devices/pci0000:00/0000:00:10.0/0000:02:00.0/drm/card0 /dev/dri/card0
(II) config/udev: Adding drm device (/dev/dri/card0)
(II) xfree86: Adding drm device (/dev/dri/card0)
setversion 1.4 failed: Permission denied
(II) config/udev: Adding input device applesmc (/dev/input/event7)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Apple Computer, Inc. IR Receiver (/dev/input/event8)
(**) Apple Computer, Inc. IR Receiver: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Apple Computer, Inc. IR Receiver'
(**) Apple Computer, Inc. IR Receiver: always reports core events
(**) evdev: Apple Computer, Inc. IR Receiver: Device: "/dev/input/event8"
(--) evdev: Apple Computer, Inc. IR Receiver: Vendor 0x5ac Product 0x8242
(--) evdev: Apple Computer, Inc. IR Receiver: Found keys
(II) evdev: Apple Computer, Inc. IR Receiver: Configuring as keyboard
(II) XINPUT: Adding extended input device "Apple Computer, Inc. IR Receiver" (type: KEYBOARD, id 9)
(II) config/udev: Adding input device applesmc (/dev/input/js0)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Built-in iSight (/dev/input/event6)
(**) Built-in iSight: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Built-in iSight'
(**) Built-in iSight: always reports core events
(**) evdev: Built-in iSight: Device: "/dev/input/event6"
(--) evdev: Built-in iSight: Vendor 0x5ac Product 0x8507
(--) evdev: Built-in iSight: Found keys
(II) evdev: Built-in iSight: Configuring as keyboard
(II) XINPUT: Adding extended input device "Built-in iSight" (type: KEYBOARD, id 10)
(II) config/udev: Adding input device Apple Inc. Apple Internal Keyboard / Trackpad (/dev/input/event10)
(**) Apple Inc. Apple Internal Keyboard / Trackpad: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Apple Inc. Apple Internal Keyboard / Trackpad'
(**) Apple Inc. Apple Internal Keyboard / Trackpad: always reports core events
(**) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Device: "/dev/input/event10"
(--) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Vendor 0x5ac Product 0x237
(--) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Found keys
(II) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Configuring as keyboard
(II) XINPUT: Adding extended input device "Apple Inc. Apple Internal Keyboard / Trackpad" (type: KEYBOARD, id 11)
(II) config/udev: Adding input device bcm5974 (/dev/input/event9)
(**) bcm5974: Applying InputClass "evdev touchpad catchall"
(**) bcm5974: Applying InputClass "Multitouch Touchpad"
(**) bcm5974: Applying InputClass "touchpad catchall"
(**) bcm5974: Applying InputClass "Default clickpad buttons"
(**) bcm5974: Applying InputClass "Disable clickpad buttons on Apple touchpads"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.15.0, module version = 1.7.4
(II) Using input driver 'synaptics' for 'bcm5974'
(**) bcm5974: always reports core events
(II) synaptics: bcm5974: found clickpad property
(--) synaptics: bcm5974: x-axis range -4460 - 5166 (res 0)
(--) synaptics: bcm5974: y-axis range -75 - 6700 (res 0)
(--) synaptics: bcm5974: pressure range 0 - 256
(--) synaptics: bcm5974: finger width range 0 - 16
(--) synaptics: bcm5974: buttons: left double triple
(--) synaptics: bcm5974: Vendor 0x5ac Product 0x237
(--) synaptics: bcm5974: touchpad found
(**) bcm5974: always reports core events
(II) XINPUT: Adding extended input device "bcm5974" (type: TOUCHPAD, id 12)
(**) synaptics: bcm5974: (accel) MinSpeed is now constant deceleration 2.5
(**) synaptics: bcm5974: (accel) MaxSpeed is now 1.75
(**) synaptics: bcm5974: (accel) AccelFactor is now 0.017
(**) bcm5974: (accel) keeping acceleration scheme 1
(**) bcm5974: (accel) acceleration profile 1
(**) bcm5974: (accel) acceleration factor: 2.000
(**) bcm5974: (accel) acceleration threshold: 4
(--) synaptics: bcm5974: touchpad found
(II) config/udev: Adding input device bcm5974 (/dev/input/mouse0)
(**) bcm5974: Ignoring device from InputClass "touchpad ignore duplicates"
(II) NVIDIA(GPU-0): Display (Apple Color LCD (DFP-0)) does not support NVIDIA 3D
(II) NVIDIA(GPU-0): Vision stereo.
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
(II) NVIDIA(GPU-0): Display (Apple Color LCD (DFP-0)) does not support NVIDIA 3D
(II) NVIDIA(GPU-0): Vision stereo.
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
(II) NVIDIA(GPU-0): Display (Apple Color LCD (DFP-0)) does not support NVIDIA 3D
(II) NVIDIA(GPU-0): Vision stereo.
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
(II) NVIDIA(GPU-0): Display (Apple Color LCD (DFP-0)) does not support NVIDIA 3D
(II) NVIDIA(GPU-0): Vision stereo.
(II) NVIDIA(GPU-0): Display (Apple Color LCD (DFP-0)) does not support NVIDIA 3D
(II) NVIDIA(GPU-0): Vision stereo.
(II) NVIDIA(GPU-0): Display (Apple Color LCD (DFP-0)) does not support NVIDIA 3D
(II) NVIDIA(GPU-0): Vision stereo.
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server

X301 fingerprint reader fails during suspend/resume cycles

So you have to type in the password.

Same on X300. I suggest you search for X300 and that problem because there is already an unofficial (and still not always working) "solution". Find the answer in my X300 problem sumup thread.

My fingerprint reader on my pavillion dv3 4050ea doesn't work

I formated my pavillion dv3 4050ea windows 7 64 bit starter notebook and somehow forgot to back up the swsetup files i installed windows 7 professional 64 bit and my finger print reader doesn't work again, i've installed and unistalled almost every validity sensor software i've seen but it still doesn't work. I even downloaded from therecommended one from the action centre to no avail. Can someone please help me locate the right driver so i can activate my finger print driver. Thanks

If you had done a factory image recovery it would have been simpler for you. All drivers were available in the Recovery Manager.
Power button -->tap the Esc key and in the Startup menu select F10 for BIOS Setup. In the BIOS, go to the System Configuration tab and look for the validity sensor enable/disable to see how it is set. You will need to have it enabled for it to work.
You will also need to download, install and enroll your fingerprints in the SimplePass Indentity Protection software. available at the web support portal for your notebook.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Web Service Call Fails on First Attempt

Hi,
I am calling a .Net web service from Flex and I am getting
unexpected results on the first call. The function accepts a few
parameters and returns an integer. I currently have it coded to
return 1, 2, or 3, but it always returns 0 on the first call. All
subsequent calls return expected results. Is this a Flex bug, or am
I missing something?
Thanks!

Hello.
Last month, I've made an reply to the topic just the same to
yours.
Please see:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=585&threadid=1257326#45 61856
I'm not sure this problem is a bug or not, but in my
situation, this problem has been happened since I updated Flex
Builder....

Frame creation fails at first attempt but creates succcessfully later on

hi
i am trying to create frames from a movie using c#.I have converted javascript code to c#.But every time i attemp to create frames with a new movie,it fails to create frames in photoshop cs5.But it easily generates frames for the movie that have been used once in photoshop.I am unable to get any clue why it is working like this.plaese give some advice.

Try to change the value of Failovertimeout to 1000.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Import files fails on first attempt

Hi,
I have a plugin which pulls files from a certain folder for import.
The first time my plugin tries to import a file i get this error
But subsequent calls to the same document succeed and adobe acrobat imports it correctly. Do you know what might be going on, is it some sort of timing issue?

When you click "Insert Files" I override the Open Dialog if it is for this feature. I then create an ASPath array with my files and load the files before sending the result back in *outASPathName...
The timing error occurs in the following scenario
1. Click Insert Files
2. Select Files and click Insert
3. The default Insert Files dialog appears with my files loaded
4. If i click this within a few seconds it throws the above error
4a. If i want about 5 seconds and click it works

Fingerprint reader on DV6t no longer works on windows logon

For some reason the fingerprint reader on my Pavilion Dv6t, LM720AV, does not work on windows logon anymore
I get the usual lock screen where I have to enter my password. The fingerprint option no longer appears
I have tried rebooting, powering off, reinstalling the validity sensor package sp55109 and it still does not work
Any help would be greatly appreciated
Thanks

Export the Webcard Database:
If you have working SimplePass software, Export your Webcards before proceeding. In the event that you must later remove the SimplePass software, your webcard backup can be used (imported) to restore your website login information.
Start SimplePass > Settings > Export NOTE: File will be named *.tsd
Then:
Try / Consider:
===================================================================
The Hard Reset:
This method works for a variety of Driver connection and ‘stuck’ program issues.
Shut down the computer
Disconnect all external devices - everything.
Remove (disconnect / unplug) the AC power
If the notebook contains a removable Battery, remove it
Press and hold power button for at least 30 seconds
Reinstall the AC power cord for first startup ** See Note
Power on - Log in
Next time you shut down the system, reinstall the battery.
** Note: If time is short, reinstall battery the first time and be done with it.
Reference:
Hard Reset to Resolve Hardware and Software Issues
===================================================================
If that does not resolve the issue, then try this:
Repair the SImplePass Software:
Control Panel > Programs and Features >
Look for this program:
Right-Click on HP SimplePass
Select "Repair"
Restart / Reboot your computer and log in...
====================================================================
Kind Regards,
Dragon-Fur

T440p, WIndows 7: Fingerprint Reader Fails on First Attempt to Log In, Works on Second After Delay

Similar Messages

Maybe you are looking for