T440p with pro dock not charging battery

I have a new t440p and a docking station.  when the system is docked, the battery does not charge.  The power indicator shows "0% available (plugged in, charging).
The system has been plugged in for a whole day and it still does not charge.
Solved!
Go to Solution.

Does it charge when undocked?
Jonas
Microsoft MVP: Windows Consumer Expert
Yoga Tablet 2 10 || ThinkPad X1 Carbon (20A7007MPH) || ThinkPad Helix (3698-6EU) || IdeaCentre B540
Twitter: @jonashendrickx

Similar Messages

  • The Mac Book Pro is not charging. The led is green with the connection and the computer is not charging. Thank you for the help

    The Mac Book pro is not charging. The led is green with the connection and the computer is not charging. Thank you for the help

        Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, contact Apple.
    Best.

  • My Macbook Pro is not charging eventhough the battery is 95%, Is it not working ?

    My Macbook Pro is not charged even  though the battery is at 95%. This is my first Macbook therefore I dont have any knowledges about it. When I replug the Adapter, only green light appeared, no matter how many tme I try. I bought it last year therefore I dont know if the battery is dead, or someting else happen to it. Last time, I need to get a new adapter because it is not charging at all. Is there anyway I can prevent it to happen? Thank you so much for helping me.

    About Batteries in Modern Apple Laptops
    Apple - Batteries - Notebooks
    Extending the Life of Your Laptop Battery
    Apple - Batteries
    Determining Battery Cycle Count
    Calibrating your computer's battery for best performance
    MacBook and MacBook Pro- Mac reduces processor speed when battery is removed while operating from an A-C adaptor
    Battery University

  • The battery of my macbook pro will not charge and the LED light is only green. What to do?

    the battery of my macbook pro will not charge and the LED light is only green. What to do?

    This might help:
    Intel-based Macs: Resetting the System Management Controller ...
    Otherwise, you should probably take your computer in to a service place to be tested, since there a a few possible causes of this behavior.

  • My macbook pro will not charge. the charger blinks with a dim green light and the computer will not turn on

    my macbook pro will not charge. the charger light is dim green and blinking.

    Please make a Genius Appointment and take it in for service.You may have a bad charger, battery, or worse.

  • Macbook pro says not charging but still the battery is charging

    macbook pro says not charging but still the battery is charging

    This isn't reference in any of the online support material that I've seen. Do you have a link to support this? Just curious is all.
    I had a similar issue on my wife's '09 MBP. Initially I thought it was the battery seeing as it's an older machine, but we tried resetting the SMC (after a bunch of other suggestions) and that seems to have done the trick.

  • My macbook pro is not charging - any help please!?

    My macbook pro is not charging - any help please!?
    <Edited by Host>

    Hi sdennisonta,
    If you are having an issue with charging your MacBook Pro, I would suggest that you troubleshoot using the steps in this article - 
    Mac notebooks: All about batteries - Apple Support
    If the battery appears to be working correctly you may want to see if the issue lies with your power adapter. Use the steps in this article -
    Apple Portables: Troubleshooting MagSafe adapters - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • TS1713 my Macbook pro is not charging. I used another cord that was charging another Mac and this cord will not charge my machine!

    Macbook Pro is not charging. I used another cord which was charging another Mac and mine still wont charge

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, contact Apple.
    Genius Bar reservation:
    http://www.apple.com/retail/geniusbar/
    Best.

  • My macbook pro will not charge when I am using it.

    My macbook pro will not charge when I am using it. My battery will say "charged" then "not charging" and it goes back and fourth. It says "Power Source: Power Adapter". But when I use my pro it will loose the power source then reconnect a second later to it. This problem is getting annoying because I have to stop using my macbook pro to charge it.

    Reset SMC.
    http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, contact Apple.
    Best.

  • Palm Pre crazy symptoms: "phone offline", will not charge battery, will not start, error message "an error has occured that cannot be resolved"

    This is a long description of a series of problems with my new Palm Pre. You may wish to search the text to find your specific issue(s). There is no solution in my post. Look for possible answers in the responses to come.
    I bought my Palm Pre 4 days ago and it arrived 2 days ago. Phone worked great. Last night I plugged in the phone and updated the OS. After completion, I selected "Done" and went to bed.
    - First Series of Issues: "Phone Offline", will not charge battery -
    In upper lefthand corner of the phone there is the message "phone offline". Although the phone has been charging all night it reads "26% battery". I called the general Sprint tech support number and we tried the following things:
    1) Restart phone (press and hold power button, then select "turn off". after power down, press and hold power button to power on.)
    2) Reset the phone (several different ways - call tech support so that you do this correctly)
    The individual at Sprint then sent me to another tech support person, presumably 2nd tier.
    - Second Series of Issues: Error message "an error has occured that cannot be resolved" -
    Sprint tech support person #2 also had me restart and reset the phone in a number of ways. In her words "we've tried every palm pre trick I know" and each time the phone was unresponsive. Often we received the error message "phone is offline". We did a full erase and after that the phone would no longer restart. At this point the error message came up saying "an error has occured that cannot be resolved" which referred me to www.palm.com for assistance. I think it's important to note here that this was not the typical error message (black screen with white letters) but rather the blue sky background with a semitransparent box over it with white text.
    Sprint tech support person #2 then connected me with Palm support and the dance continued. Again we tried a whole bunch of resetting and restarting and erasing options. Palm support instructed me to go to: www.palm.com/rom to download WebOS Doctor, which I did. I downloaded the file. While that was happening he had me hold the "volume up" button and plug the phone into the charger. This caused a USB symbol to appear on the phone. When the file was complete I received an error message that the file couldn't run. Palm tech support person seemed surprised. I mentioned that I was on a Mac and he said he couldn't help me. He then transferred me to another Palm support person who works with Mac users.
    Palms tech support person #2 then informed me that I should have selected the "mac" download option on www.palm.com/rom. I verbally walked her through the whole series of webpages, telling her that it says that you need Windows (version whatever) or Mac (version whatever) but that at no time was there an option to download a different WebOS Doctor for different operating systems. After some more discussion she told me she would have to have someone call me back tomorrow.
    - Third Series of Issues: phone stuck on USB symbol -
    So at the moment the phone is completely useless. Not fantastic. I booted up the mac in Windows 7 and downloaded WebOS Doc and received the same error. I also ran Windows Vista virtually and received the same error. Later this afternoon I'm heading into work to try the same thing on Windows XP.
    In the meantime, I got onto this forum and located a thread that provided a direct link to the necessary file:
    palm.cdnetworks.net/staging/rom/webosdoctorp100ewwsprint.jar
     After downloading that file, which I realized could totally be a virus, I was able to get WebOS Doc working on my computer. It required that I recharge the phone completely before beginning and now it's on the screen that says "Don't disconnect your phone" and the file is at 3% complete. Only... it's been at 3% complete for almost 30 minutes.
    I am hoping that Palm will follow up with me tomorrow, but I'm leaving at 7am on a business trip and would love to have the thing working. Any suggestions are welcome, even if you can just tell me how to get the think disconnected safely before my flight tomorrow. I don't fancy getting through security with my phone wired to my laptop.
    Thanks.
    Post relates to: Pre p100eww (Sprint)
    This question was solved.
    View Solution.

    Hello and welcome to the forums;
    Our phone support is open every day Monday through Sunday, although there are different hours of operation for the weekend. If after a webOS Doctor reset you are still experiencing the same problems, I would likely recommend replacement, either in a local store for your carrier or through our technical support department.
    There may be additional technical support offered or suggested over the phone, this would need to be done first before a replacement could be issued.
    Hope this helps,
    TreoAide

  • My Macbook Pro will not charge. I have tried other charges and nothing. Can the MagSafe port go bad? Is that expensive to repair?

    My Macbook Pro will not charge. I have tried other charges and nothing. Can the MagSafe port go bad? Is that expensive to repair?

    The port can fail. Internal boards can fail. Batteries can fail. All with the result that no charging occurs. 
    You can try Resetting the System Management Controller and you can try Troubleshooting MagSafe adapters. 
    But usually you will have to take the mac in to a service place for testing.  It can get expensive, although occasionally it is not.
    charlie

  • My macbook pro is not charging ? Why

    MY macbook pro is not charging. the battery percentage sign disappear or shows there is no battery power. I take it to Apple shop and they told me after checking the problem is of the Hard disk . I have many important things on it . What do you think ?

    Perform a SMC reset:
    http://support.apple.com/kb/HT3964
    After you have backed up your data, open System Profiler>Power and post the following from your MBP:
    (Make certain that the charger is connected)
    Ciao.

  • Ugent: DM4-1160us laptop not charging battery when battery completely drained

    Hi, all,
    I bought it last year and, a month later, I found it does not charge battery when the
    battery was completed drained. "completely drained" means when clicking on power on
    button, the charging light does not even flash. In such as case, if I plug in the power cord
    to charge the battery, the computer will stay in "charging, 0%) forever and the charging
    light stays amber and sometimes turns into white later.
    Computer can not power up without power cord plugged in. Battery dinostics said battery
    is bad and gave an error long error code. HP suppport replaced it with a new battery. But,
    I found later the same problem happened again.
    Note: the problem only happens when battery is completed drained meaning
    the charging light does not flash when trying to turn the computer on.
    I suspect the computer itself is defective. Anyone has idea?
    Thanks,
    SZ

    THIS IS THE SOLUTION AND IT WILL TAKE 90 SECONDS TO FIX
    Power management software in Windows Vista
    Understanding battery charging issues
    If the notebook battery is not charging or the notebook does not indicate that the battery is charging, the most likely scenario is that the battery itself is operating correctly, but its power management software may have become corrupt. In order to correct the problem, you will need to uninstall and reinstall the power management software by using the Device Manager. This document will explain how to uninstall and reinstall the ACPI Battery listings in Windows Vista, as well as how to obtain and install updated BIOS files, if needed to correct other battery issues.
    Uninstalling and reinstalling power management software in Windows Vista
    In order to correct problems with the battery's power management software, follow the steps below.
    1. Click Start and type device in the search field, then select Device Manager .
    2. Expand the Batteries category.
    3. Under the Batteries category, right-click the Microsoft ACPI Compliant Control Method Battery listing, and select Uninstall .
    WARNING: Do not remove the Microsoft AC Adapter driver or any other ACPI compliant driver.
    4. On the Device Manager taskbar, click Scan for hardware changes .
    Alternately, select Action > Scan for hardware changes .
    Windows will scan your computer for hardware that doesn't have drivers installed, and will install the drivers needed to manage your battery's power. The notebook should now indicate that the battery is charging.

  • Since my I upgraded to ios7 my iPhone 4 will not charge, battery completely dead.  Any ideas

    Since my I upgraded to ios7 my iPhone 4 will not charge, battery completely dead.  Any ideas

    I updated my iphone 4 to ios7 three days ago. It now will only charge if connected to a computer USB port, either Mac or windows. It no longer charges on any wall mounted USB cable, like it did before the upgrade. The wall mounted cables still work just fine with an iPhone 4S and a new iPad retina display but not at all with the iPhone 4. Took it to a genius at apple store and they checked the battery. It still charges to 80% of original. They were clueless and suggested I replace the unit.  It seemed to be related to ios7

  • Anybody sell the Mac Pro and not charge tax?

    Anybody sell the Mac Pro and not charge tax?

    I concur. Expercom is probably THE best place to buy a Mac - other than directly from Apple - of course.
    I ordered my new 8 Core Mac Pro on Thursday with just standard shipping. It is scheduled to arrive some time today. I got it with 4GB's of Ram for $2770, no tax and only 1 cent shipping.
    Good Luck on your purchase!

Maybe you are looking for

  • Two mighty mouses, one macbook pro.

    I have a wireless mighty mouse for home. Sometimes lately when I take my macbook pro somewhere, I noticed I have forgotten my mouse. So, I splurged and bought a 2nd mouse to leave in my case so I never have to remember to bring my desk one. Well, it'

  • 5200 ONLY ALLOWS for 960 X 1280 resolution in Windows XP

    The driver for my GeForceFX 5200 isn't letting me use my monitor to its full capacity of 1024 x 1280 resolution. Before I installed the driver, it would.   Running Mandrake 9.2 Linux and Fedora core lets me run it in 1024 x 1280 Windows limits it to

  • Jdeveloper 11.1.1.0.0 - DefaultServer don't start

    Hi. I have download the new version of Jdeveloper. I develop a simple ADF application. I right-click my jsf and press run. The DefaultServer didn't start. I see the problem is that the version of jrockit is 1.5 and the server needs the jvm 1.6. Is th

  • Windows copied files to partition, now Disk Error all the time...

    Hi all, I have installed Windows XP SP2 before (using this disk) on a Mac using Boot Camp but this is refusing to read the files Windows Installer placed on the BootCamp partition, so it can't finish the installation. Merged it back, did the whole th

  • How to identify time taken to execute a package

    Hi all, Is the method without TKPROFF to find the time taken to execute a package that calls a procedure. for examples Lets says I execute a packaage at SQLplus window SQL> Execute my_pack.bal_proc; (It took some time may be 4 hrs to excecute accordi