T440s re-imaged with 8.1 Pro VL - hybrid drive?

We started buying the T440s as one of our business laptops. How can I get th hybrid drive stuff to work with a re-image? I installed the Intel Rapid Storage Technology drivers from http://support.lenovo.com/us/en/downloads/ds032146 but the system does not seem to be seeing the drives properly. And if I boot into the BIOS, there are no options to set or even see the settings of regarding RAID, etc.

1. You cannot use the Lenovo external drive, because you already have a built-in SuperDrive. Get your internal drive fixed.
2. Your Mac does not support EFI Boot, because it is a PreUEFI model based on How to identify MacBook Pro models - Apple Support and the following list. If you force it with EFI boot, some of your hardware GPU/Audio will not work properly.

Similar Messages

I had problems with my MacBook pro's hard drive.

I had problems with my MacBook pro's hard drive. And I have this question how can I end up getting a replacement for it like get a new one.

The recycle program makes it easier for you to trade in your old Mac and buy a new one. Apple has a partner that will take the old one and give you a gift card for the value -- if your old Mac is in pretty good condition and doen't have problems (passes the diagnostics).

How do i print from iPhoto with Epson Stylus Pro 3800 Printer Driver v8.64

Please help...I'm a new user...how do i print- select paper Epson options and make colour adjustments using iphoto and Epson Stylus Pro 3800 with Printer Driver v8.64

Yes, do share your solution for others who may want to do the same with their special profiles and printers.

I cannot use the FS-4000DN printer with my mac pro. What driver do I need?

I have a refurbished Mac Book Pro with OS X 10.8.5 and cannot find a driver for the Ecosys FS-4000DN Printer. Says my mac book is incompatible. I realize this may not be a mac problem but one with the printer co. Any ideas?

Have you tried with GutenPrint and see if that can drive the printer?

Mac pro hybrid drive

Hi there guys,
My Mac pro 1.1 2007 boot times are relativly slow, and was considering a "seagate 1tb hybrid hard drive". My questions are:
1) Has anybody put in a hybrid hard drive into a mac pro 1.1 2007? What were the results?
2) Will it work correctly?
3) Does the mac contain a function to COMPLETELY COPY my main hard drive (With Mac OSX) to the hybrid drive if i get one, then if i replaced the old hard drive with the hybrid, would it work fine?
I want a SSHD because they are significantly cheaper than SSD, and have a large space which i want. I DONT have much money to spend, hence i am not buying a SSD. With this hybrid, my boot times should also rapidly increase correct? As the OS will go onto the solid state part ?
please if you HAVE EXPERIENCE or know someone who has done it or are CONFIDENT WITH THE RESULTS, please, please anyswer my questions!!
Thanks a lot guys!

By far the biggest payback (once you have enough RAM) for a Mac that supports multiple drives is to establish a Boot Drive, with only the System, Library, Applications, and the hidden unix files including Paging/Swap. User files are moved off to another drive.
This alleviates the "traffic jam" that is inherent with everything on the Boot drive.
If that drive (which can be surprisingly small) is a fast drive, it speeds up everything. If it is a low-latency SSD, that speeds things up even more. I have been running a Server-attached Mac Pro on an SSD as small as 30GB, but that is too small for most users. 128GB is plenty if user files are moved off.
The large space is on the drive in the next slot, and that is where your User files are located.
SSDs are still too expensive to be used to store everything.

Trouble with creating an image sequence in QT Pro 7.4.

I'm having trouble creating an image sequence in QT Pro 7.4(Windows XP). I have a folder containing a JPEG sequence (alternative a PICT-Image sequenz). I Open image sequence, choose the image-frequency and choose the first image, but QT created only the first image in a self-contained movie. But, the same images with the same procedure with QT Pro 7.2 on another Windows XP- PC created a correctly self-contained movie. Is this a bug in QT Pro 7.4?
Please help me and apologize for my bad english!

You have to revert to an older version of QT. After Effects users are having the same issue. Here's a link to a temporary fix (reverting back to older version):
http://www.adobeforums.com/webx/.3c05dee6
1) I downloaded QT 7.3.1 from the Apple Support Downloads website.
2) I downloaded Pacifist from their webiste
3) I installed Pacifist on my machine
4) I opened the QuickTime DMG file and drug the PKG file out of it
5) I launched Pacifist and dragged the QuickTime 7.3.1 PKG file onto the Pacifist window.
6) I clicked on "Contents of QuickTime531_Leopard.pkg" to select it in Pacifist
7) I choose "Install" from the Pacifist menu at the top of the window
It started installing and I chose "Replace" when ever it prompted me. You can actually click a little check box that says "Don't Keep Asking Me This" and then you don't have to click "Replace" a 1000 times.
9) I restarted my computer (Intel Quad-Core 3 Ghz) went to System Preferences>QuickTime and checked that I was now actually running QT 7.3. YES!!!

HT2506 I'm using Preview with a MacBook Pro and MacOS 10.6.8. When adjusting sharpness in the Adjust Colour tool, images are not saved. Any hint? Thanks.

I'm using Preview with a MacBook Pro and MacOS 10.6.8. When adjusting sharpness in the Adjust Colour tool, images are not saved. Any hint? Thanks.

I too experienced the same issue. Here are my details:
Recently I bought a 15” Macbook Pro and last night I tried to connect and use a Edirol FA/66 Firewire 400 connected outboard audio interface using a Firewire 400 to 800 adapter then connected to a Firewire 800 to Thunderbolt adapter since the MBP doesn’t have a native Firewire port. What I observed is that the Edirol was not getting power from the bus nor did the MBP (running Yosemite) recognize the Edriol. At first I thought there was a problem with the Edirol since I haven’t used it in a while but when I connected it to an older MBP that has a native Firewire port, it worked normally. Is there a known issue with these sorts of external audio interfaces working properly with newer MBP running Yosemite? I’m hoping that a software update will fix this issue.

Image size problem with Retina Macbook Pro

I exported raw images to Jpg and then resized as 1200 x 800 resolution images through "Easy batch Pro" app. When I uploaded them, they were extremely large. I've tried it several times and the result was always the same. Is it a problem with "Easy batch Pro" app, or something with Retina Display resolution? I also resized them as small size like 600x400, but the image was totally broke, and apparently had different look when I saw the original via aperture. What should I do?

What's the problem exactly? Call and complain. It's up to them on how they want to handle it, but if it's something normal or minor, they'll just fix the issue under warranty and send you on your way. That's how warranty works. In instances where a user has had repetative failure of the same kind or others with the same system, a complete replacement was done, but those were issues that border on the "it's a lemon" idea.

Importing images with text into Final cut pro

I'm using FC Studio on a 15" Powerbook 1.67 GHZ 1.5 GB RAM OSX 10.4.9 with a 300GB external HD.
I'm editing a short film and am using some still images. I've successfully imported and used photographs edited in photoshop. I'm trying to import what is essentially a screen shot of a MSword Doc consisting of boxes, text and graphics.
I've exported the word doc to PDF and imported to photoshop with 300dpi and saved as both jpeg and png. When viewed in photoshop the resolution of the text appears normal. It imports sucessfully but when viewed in full size in the timeline or external monitor the resolution of the text is terrible. I've also tried adjusting the scale of the image in the Canvas.
I've read up on this issue a little and have tried reducing and increased the image size and dpi. Has anyone else tried to import still images with text??
I apolgise if this issue has already been addressed - I've tried using the solutions provided for still images (without text) but have come up against a wall!
I would appreciate any help or feedback!

I have used Adobe Illustrator saved out as.png with great results.
Larry jordan has good info for you here;
http://www.larryjordan.biz/articles/textindex.php

Re-Imaging + Downgrade rights with Win 7 Pro Refurbished?

HI, is the following possible according to Microsoft licensing terms in Europe?
- I buy 100 x refurbished PCs with Windows 7 Professional Refurbished licenses (from an official Microsoft refurbisher)
- Then, I buy 1 x Windows 8 Professional Upgrade license.
Does this allow me to Downgrade my Windows 8 Professional license to Windows 7 Professional and do Re-Imaging with this 1 license and install it on my 100 PCs?
As far as I understand Microsoft-Licensing, it should be ok, but I want to make sure it is ok.
Many thanks!
Stefan Tauchhammer

Hello,
I'd check out the
Product Sales and Licensing Solution Center.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Using a 30" Cinema Display with new Mac Pro

Hello Everyone:
I just purchased, and waiting to arrive a new 2014 8 core Mac Pro which is an upgrade to my 2009 quad core Mac Pro. I currently use a 30 inch Apple Cinema display which has the DVI connection. I was thinking that I would use a DVI to HDMI adapter and plug the 30" into the HDMI port on the new Mac Pro. I have since heard that people have been having issues with this older monitor getting it to work properly with the new mac pro. some have suggested buy the $99 mini display port to DVI adapter and using that, but I don't believe there is a mini display port on the new mac pro.
I have considered buying a new thunderbolt display because I am assuming that it will have a much better image quality than the older 30 in display but I hate the fact that it's a 27" and I would be giving up the 3" in size. I do a lot of video and audio recording editing and love the extra screen real-estate. Can anyone confirm a couple of things for me?
1. Will the 30 inch display work with a new mac pro and can I use the DVI to HDMI adapter?
2. Does the new Thunderbolt display have a much better image quality than the 30 in display and because its newer, will look that much better with the mach pro?
Thank you in advance.

1. Will the 30 inch display work with a new Mac Pro?
Yes.
Can I use the DVI to HDMI adapter?
Not if you want full resolution. You need a Mini DisplayPort to dual-link DVI adapter
<http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter>
It plugs into a Thunderbolt port (and USB port) on the computer.
2. Does the new Thunderbolt display have a much better image quality than the 30 in display and because its newer, will look that much better with the Mac Pro?
No, it has more pixels (in the vertical direction), but they are spaced a bit more apart, so you don't want to be as close to the display.

Lenovo Yoga with Windows 8 Pro, Office 2013 and Visual Studio

For you developer types, I just wanted to post a message and let you know my experience with Lenovo Ideapad Yoga 13 as a development machine. I bought Lenovo Ideapad Yoga 13 from Bestbuy for $999.99. As expected, it came with a crap ton of bloatware installed by Lenovo.
Here is a summary of what I did to it (I take no responsilibity for accuracy of below information. You are on your own if you decide to follow them. I am just putting this down from my memory so that I can look it up in the future if I ever need to do this again).
INITIAL CLEANUP
Installed Lenovo hotfix for partition cleanup/merging: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS033035
Installed Lenovo Touchpad driver fix.
CAUTION: I take no responsibility for below steps. I am writing them from memory and if you decide to follow them and end up making your machine unusable, you are on your own as Lenovo might not honor your warranty.
BACK UP ENTIRE DISK (requires an empty USB flash drive for booting and another external USB drive for backup)
Copied Drivers from D_Backup folder to the external USB hard drive (plugged into USB 3.0 port).
Installed Paragon Backup & Recovery 2012 Free: http://www.paragon-software.com/home/br-free/
Created Paragon Backup & Recovery boot USB flash drive with default Linux recovery environment option (flash drive plugged into USB 2.0 port).
Shutdown Lenovo Yoga.
Plugged in the Paragon Backup & Recovery boot USB flash drive (USB 2.0 port).
Pressed the one key recovery button (next to power button). Went to BIOS.
In the BIOS, enabled Legacay mode and made Legacy high priority and saved the changes.
The machine booted into Paragon Backup & Recovery mode. From there, made a backup of entire disk to the external USB hard drive.
Shut down the machine, pressed the one key recovery button (next to power button). Went to BIOS. Turned off Legacy mode and switched back to UEFI boot mode and saved the changes and restarted the machine.
Logged into the machine and verified that everything was good and checked the external USB drive to verify that the backup image was present.
MAKE WINDOWS 8 PRO BOOT USB FLASH DRIVE (requires a second empty USB flash drive and a second computer with Windows 7. This USB Flash Drive has to be between 4GB to 32GB as Windows won't format 64GB flash drives to FAT32 mode)
(Note: I installed Windows 8 Pro in UEFI mode. See http://pcsupport.about.com/od/windows-8/a/install-windows-8-usb.htm)
You need a licensed ISO image of Windows 8 Professional Full version (not the upgrade version) from your MSDN or Technet subscription or create an ISO from the Windows 8 Pro full version DVD.
Download Windows 7 USB/DVD Download Tool on the computer with windows 7.
Plug in the second empty USB flash drive (has to be at least 4GB but less than 32GB) into the computer with Windows 7.
Using Windows 7 USB/DVD Download Tool and the ISO file, create the Windows 8 Pro bootable USB Flash drive.
Create a new folder on your computer disk, for example, C:\WIN8USB.
Copy all the files from your USB flash drive to the newly created folder (created in the previous step).
Right click on the USB drive icon in Computer window and select “Format…” from the context menu. Make sure you select “FAT32 (Default)” in “File system” drop down menu. Click “Start” and wait till the drive gets formatted. This step is needed because NTFS is not readable by BIOS in UEFI boot mode. During formatting, MBR is preserved so the thumbdrive is still bootable.
Copy all the files from the folder you created earlier (C:\WIN8USB, for example) to the formatted drive. Your Windows 8 installation USB drive is ready to install in UEFI mode.
WIPE THE DISK PARTITIONS
Shut down the machine, pressed the one key recovery button (next to power button). Went to BIOS, enabled Legacay mode and made Legacy high priority and saved the changes.
Booted into Paragon Backup & Recovery boot USB flash drive again. This time, I deleted all partitions on the primary disk (Disk 0). CAUTION: This WILL wipe your hard disk and will make your machine unusable!!!
Shut down the machine, pressed the one key recovery button (next to power button). Went to BIOS. Turned off Legacy mode and switched back to UEFI boot mode and saved the changes and shut down the machine.
At this point, the disk is wiped clean. All factory installed software and recovery partitions are gone!!!
INSTALL WINDOWS 8 PRO
Plug in the USB Flash Drive with Windows 8 Pro install files.
Windows 8 Installer would show the unallocated disk space. I can't remember the exact details but either I had to click on Delete or New to delete and then create a new GPT partition. The entire partition was about 119GB.
From that point, follow the Windows 8 Pro installation steps.
After booting up into Windows 8 Pro, plug the external USB drive that had the drivers folder backed up from D_backups.
Install all the drivers from this folder (I was able to install everything except for one Intel fast boot one because of missing partition but my Yoga still boots up just as fast).
Go to device manager to check and everything should be good now.
Run Windows Update.
You should now have about 101GB free on C: drive!!
INSTALL VISUAL STUDIO, SQL SERVER and OFFICE 2013 ON LENOVO YOGA 13
I installed the following in that order:
Microsoft SQL Server 2008 R2 Developer edition (I installed all components, everything!). Then I installed latest service pack.
Microsoft Visual Studio 2010 (I installed all components, everything!). Then I installed latest service pack.
Microsoft SQL Server 2012 Developer edition(I installed all components, everything!). Then I installed latest service pack.
Microsoft Visual Studio 2012(I installed all components, everything!)
I ran Windows update and also installed Nov 2012 updates of SQL Server Data tools.
I then installed Office 2013 Pro Plus.
MAKE LENOVO YOGA 13 MORE SECURE
Go to Control Panel and enable Windows Defender (it is included by default in Windows 8 and is anti-virus and anti-malware solution)
Enable full hard-disk encryption using BitLocker feature of Windows 8 Pro. Since Lenovo Ideapad Yoga 13 doesn't have hardware TPM, you have to enable password based option. For this, follow the steps here: http://rics.partners.org/show_article.php?id=274.
Basically, you go to GPEDIT.MSC and Open Computer Configuration => Administrative Templates => Windows Components => BitLocker Drive Encryption => Operating System Drives. From the right pane double-click "Require additional authentication at startup. Select Enabled radio button and check the box for "Allow BitLocker without a compatible TPM...". Click OK and close the policy editor. Then Right-click your C drive in the Computer folder, click Turn on BitLocker. Then select Enter a password instead of USB option. Then provide a strong password (make sure to write it down and put it in a SAFE place, if you lose the password, no one can boot into your hard disk). Then select Save to a file and save it to the External Drive. Select "Encrypt entire drive...", click Next. When this is done, you will get a pop-up on the lower-right a prompt to restart the computer. Restart your PC. Enter the encryption password created earlier. If you are successful in getting into Windows, you're all set.
I also hooked up to Skydrive and used BoxCryptor to encrypt my files in cloud.
The available free disk space should now be about 54GB.
I verified that Lenovo Yoga 13 works like a champ with no slowdown with Visual Studio 2010, Visual Studio 2012 and SQL Server Management Studio open simultaneously and Bitlocker enabled!
The keyboard right SHIFT key is small but other than that, it can work as a great portable development machine and Microsoft Reader is great for reading PDF eBooks.
So if you are a Developer on Microsoft platform, go right ahead. Lenovo IdeaPad Yoga 13 is great for running Visual Studio 2010 and Visual Studio 2012 (1600x900 resolution is totally usable) while on the move. Since I have only had this machine for a few days, I can't tell much about the long term reliability.
Solved!
Go to Solution.

Thank you for posting this. I am in this exact situation. I purchased a yoga 13, and installed Visual Studio Express 2012 for Windows Phone. As it turns out, the Windows Phone Emulator ONLY works in a Windows 8 Pro environment. Since the Yoga doesn't have a disc drive, I shared my W7 computer's cd drive, then put in Windows 8 Pro, so that it could install onto the Yoga. Well, after the installation was done, I tried running my program again and ran into the same issue. It prompted me that my environment must be Windows 8 Pro! I thought that Windows 8 Pro already installed but, what confuses me is that I see no indication that Windows 8 Pro installed. When I go to the System Window, it reads: "Windows 8". Should it read Windows 8 Pro?
Ultimately, I'd like to know, are you able to execute the Windows Phone Emulator? I'm not sure as to whether the Yoga has the hardware capability (needs to be SLAT enabled or something like that?), I HOPE it is able to, and judging by your post, it seems like it but I'd love to know your perspective on my approach.
Please let me know if this makes sense, as I'm new to this kind of thing but really want to start development for Windows Phone.

How can I edit lightroom 5 smart previews on mac book pro (mbp) when the lightroom 5 master image files are on my external hard drive is disconnected from the mbp

How can I edit lightroom 5 smart previews on mac book pro (mbp) when the lightroom 5 master image files are on my external hard drive is disconnected from the mbp? So far when I try to disconnect the external HD from the mbp, I get the following pop up window: The disk "external hard drive A" couldn't be ejected because "Lightroom" is using it. Quit that application and try to eject this disk again. When I do that and restart Lightroom 5, the Adobe Photoshop Lightroom - Select Catalog screen pops up but doesn't list my external hard drive A as a choice.
I've reviewed Adobe's Lightroom Help | Smart Previews Lightroom 5 web page and still haven't been able to figure what I'm doing wrong. Any help would be appreciated.

Your internal HDD. by default, is named 'Macintosh HD'. From what information you supplied, it looks like there is already a Lightroom catalog installed on you local (internal) HDD using the standard naming convention Adobe uses as well as a Lightroom catalog on your external drive which you created. To be sure of which catalog Lightroom is loading when it starts up, To do this, start Lightroom as you normally would. After it starts, select the Lightroom menu item, then select the Catalog Preferences item and finally, navigate to the General tab. The Location information will tell you exactly what catalog Lightroom is opening by default. This will likely be the Photography Mac Book Pro Versions catalog on your external HDD. Once that is confirmed, you are ready to proceed. As an additional test/verification, you can shut down Lightroom and, this time, start Lightroom while holding down the ALT/OPTION key. This will cause Lightroom to pause and display a screen which will allow you to chose a different catalog to open. Navigate to the /Users/[user name]/Pictures/Lightroom folder and select the Lightroom 5 Catalog.lrcat file. When Lightroom comes up, there should be no previews or folders as this catalog should be empty. Now you can be certain which catalog is being used and which catalog has all your data and you are ready to migrate your current catalog. Shut down Lightroom.
To migrate your current catalog, use Finder to locate your Photography Mac Book Pro Versions folder on your external drive. Select the folder and select COPY from the context menu. Next, use Finder to navigate to the /Users/[user name]/Pictures/Lightroom folder on you internal HDD. You can start at the Macintosh HD level and work your way down by opening each level (Macintosh HD/Users/[user name]/Pictures). Select the /Pictures folder and then select PASTE... from the context menu. When the COPY/PASTE is complete, you should see the following files on the Macintosh HD:
Macintosh HD/Users/[user name]/Pictures/Lightroom/ and
Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions
The Macintosh HD/Users/[user name]/Pictures/Lightroom folder will contain the empty default catalog the Adobe created when Lightroom was installed and Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions will contain a copy of the catalog you created on your external HDD.
You are almost done now. Make sure your external drive is still attached for this step. Restart Lightroom using the ALT/OPTION key again. When the Select Catalog screen appears, select the Choose a Different Catalog button (lower left side). When you do, a Finder window will open to allow you to navigate to a catalog of your choosing. Navigate to Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions and select the file Photography Mac Book Pro Version.lrcat. This is the copy you just created. Select the Open button and Lightroom should start. You should see all of your previews and settings just as before. Also, in the left hand panel, all of your folder should show up and none of them should be dimmed and none of your previews should display a small exclamation point badge. Either a dimmed folder name or an exclamation point badge indicates that Lightroom can't find the associated image file. If everything looks good, go to the Lightroom menu, select Preferences and then select the General tab. Under Default Catalog, select an option to either load the LAST catalog opened or select the Users/[user name]/Pictures/Photography Mac Book Pro Versions catalog from the drop down. Shut down Lightroom and then restart it normally. This time, when Lightroom starts, you should be viewing the new copy of your catalog. You can confirm this by looking at the General tab on the Catalog Preferences screen (Lightroom/Catalog Preferences menu items). Shut down Lightroom once again and this time, eject your external drive before restarting. This time, your folders in the left hand panel will be dimmed but you should be able to work with your smart previews. If Lightroom should display a Select Catalog screen with the external drive detached, double check your settings as it indicates Lightroom is still looking at the copy of the catalog on the external drive rather than the new copy you made.
Finally, if you are seeing dimmed folders and/or exclamation point badges with the external drive attached, this indicates a problem. You can select any folder and select Update Folder Location from the context menu. This will allow you to navigate to the copy on the external drive and select it. Lightroom will then update the catalog (select to synchronize the content). This will not only clear the dimmed folder problem but also remove the exclamation point badges for all photos in that missing folder. However, it may indicate that not all went well with the copy of the catalog so make sure to verify all went well. You can use the Get Info option on the two folders. You should see the same number of files/folders for both the copy on the internal drive as well as on the external drive but you can't rely on the byte count because of the possibility of differences between the geometry of the two drives. Hope this all helps!

Using still images with Final Cut (and the apple suite in general)

I have had a re-occuring and long term problem that has caused me many lost hours of head scratching and work arounds, and as of yet I have not been able to come up with a good solution.
Its to do with integrating still images with the Final Cut suite.
If I receive a high quality image from a client to use in their video and I then try importing it into Final Cut and animating it, it always ends up looking like a pile of ahem. Often I will get "swimming" lines appear across fine detail on the image, and parts of it will flicker as it moves across the screen. For instance, if I have a picture of some blinds or other fine detail (especially horizontal and vertical lines), when I add a grow and throw movement to it the detail will become very noisy - buzzing and flickering like mad.
I have found I can counter this by resizing the image in photoshop to a resolution closer to SD video (700w or 500h) - but I always end up losing detail, and the flickering and noise is only reduced, not eliminated. Other things that have helped are blur effects applied at a very low level, like 0.5 blur, so its not noticeable visually, but Final Cut seems to treat it differently and quieten the noise and flicker down.
However, all of these workarounds are ultimately still giving a reduced quality product.
Also, this problem is not necessarily constrained to Final Cut, I am currently fighting DVD Studio Pro because it is murdering the text quality in a stills slideshow I am creating - and in this situation there is no animation being applied. No matter what file type (psd, jpeg, tiff, png...) or size I output the text and images from Photoshop in, the moment DVD studio pro gets hold of it, it turns to cripe.
For a while I was putting it down to the fact that I usually edit in SD (PAL) formats, and there just wasn't the resolution available to reproduce fine detail. However, I do often see other people achieving pin-sharp fine detail on still images and text in SD formats (the Apple templates are a good example)
So, my question to you, oh great and high boffins, if you are dealing with still images and text, how do you do it? How do you work around any noise problems you have, and how do you produce those pin-sharp images (both moving and still) I see in other professional productions?
Quad G5 Mac OS X (10.4.8)

still images with too high a resolution will always cause problems. this is due to the detail of the image being finer than the scanline of the tv can display ... obviously this will caise the image to flicker as these details alternately appear and disappear as and when the scanline can display them. as you have discovered, the answer is to apply a very small blur, the effect being that the detail is spread by the blur such that the scanline can dislay it correctly.
text issues are often rooted in the same problem ... unless the text is placed very carefully (whole even number on the y axis) then the quality may be impaired due to the resulting interlacing/scanline issues

Is OCZ Vertex Turbo 60GB 2.5" SSD compatible with my Mac Pro, or do I need

Is OCZ Vertex Turbo 60GB 2.5" SSD compatible with my Mac Pro, or do I need the Vertex Mac Edition?
I have decided to purchase a SSD to use as a boot drive in the spare optical drive bay.
There are so many brands available, and Intel X25-M 'G2' seems generally to be the most highly rated overall. However, there is virtually no stock of 80GBs in the UK at present, except at extortionate prices, and I don't need 160GB.
Kingston SSDs are very reasonably priced, but seem to be a bit of an unknown quantity, although I rate their DDR3 memory very highly.
I have visited the websites of several manufacturers, and read various online reviews, and the recently introduced OCZ Vertex Turbo has had some good reviews, albeit on PC forums.
At the moment I can buy the 60GB Turbo for £170.66 inc.VAT from ebuyer.com, whereas their price for the standard Vertex 60GB is £193.99 inc. VAT, which seems very strange!
When I googled "OCZ Solid State Drives +UK", Amazon UK appeared on the listings, but there was a footnote which said " not suitable for use on Mac".
OCZ list a Vertex Series Mac Edition on their website, and that is why I am asking this question.
Unfortunately, there are no UK listings when I google the Mac Edition, and I am hoping that somebody of the ilk of "the hatter" or "samsara" will be able to answer my question.
If anybody else is using the Vertex Turbo in a Mac, I would be very grateful for your input. Likewise if you have had bad experiences with OCZ SSDs.
If I wait 3-4 weeks I should be able to buy an Intel X25-M G2 80GB for round about the same price as the Vertex Turbo 60GB, i.e. if prices remain the same as currently being quoted by vendors who are out of stock.
All input will be very gratefully received. If it is positive, I will go ahead and order a Vertex Turbo from ebuyer, in case they run out of stock (which is 16 at present).
Many thanks in anticipation, guys!

Hi Samsara,
Many thanks for your advices once again.
60GB will be more than adequate as my boot drive. At the moment I am using a VelociRaptor 300GB, and I have used less than 30GB of space. That is after reinstalling all my applications and software, and includes all my files, folders, and printer drivers etc.
I have utilised under 50GB of the original 640GB hard drive, but that includes a lot of photo images which I imported into both iPhoto and Aperture.
When I receive my Agility EX SSD I will clone from the VelociRaptor using Super Duper, and I will then set up a 4 drive RAID 0 using 4 VelociRaptor 300GB disks. That set up should suit my needs for many years to come, even when I eventually upgrade from Photoshop Elements 8 to CS5.
I will back up the Agility EX to the 640GB hard drive using Super Duper Smart Update, and that will be my spare boot drive.
The 4 drive RAID 0 will be backed up to the My Book Studio Edition II 2TB, using Time Machine.
In your experienced opinion, do you think that set up will be satisfactory?
The Agility EX is actually the latest generation of OCZ SSDs, and it is one of only 2 models in their "Maximum Performance" range, whereas the original Agility was only a "Mainstream" model.
The key factor is that the Agility EX uses single-level cells (SLC), instead of multi-level cells (MLC). It is second only to the Vertex EX Series in terms of performance per GB in the OCZ range of SATA 2.5" Solid State Drives.
In very recent reviews it has outperformed both the Vertex Turbo and Vertex 120GB models from the OCZ "Performance" range in most of the test benchmarks.
http://www.hardwarecanucks.com/forum/hardware-canucks-reviews/24507-ocz-agility- ex-60gb-ssd-review.html
http://www.phoronix.com/scan.php?page=article&item=oczagilityex&num=1
http://www.guru3d.com/article/ocz-agility-ex-ssd-60gb-review-test/3
The above are just a few of the very favourable reviews of the Agility EX SSD.
I preferred to buy a 60GB SLC, rather than a 120GB MLC, because SLCs reputedly have 10 times more life expectancy, and performance wise per GB there is no comparison.
Only time will tell if I have made the right decision!

T440s re-imaged with 8.1 Pro VL - hybrid drive?

Similar Messages

Maybe you are looking for