T440s - Win7 Driver - Unknown Device
Hello
I installed Windows 7 64 Bit on my T440s and now i have one unknown device in the device manager. Could somebody point me to the right direction to which driver I do need?
Hardware-ID
USB\VID_138&PID_0017&REV_0078
USB\VID_138&PID_0017
I couldn't figure it out. Thank you very much.
Solved!
Go to Solution.
Okay I have found it. It was the fingerprint driver;-)
Similar Messages
-
IBook won't load Firewire drive; "unknown device"
That's the summation via System Profiler. It's a SmartDisk Firelite enclosure but I swapped the old 40 GB drive that failed for a new Seagate Momentus 80 GB drive. My G4 dualie recognizes the new SmartDisk setup fine. It loads immediately and I was able to access via all the utilities. Transfers work well.
But on the 1.33 iBook the green light appears on the SmartDisk enclosure, but no threat of loading. Only System Profiler identifies something, "unknown device" with 400 capability. When I remove the firewire cable, System Profiler doesn't see anything.
I had no trouble with the SmartDisk prior to the old drive failing. It worked perfectly on the iBook. My firewire port appears to be okay, since I tried Target Disk Mode with the two computers and it worked well.
Any suggestions would be greatly appreciated. I Googled and found many issues of "unknown device" related to firewire drives, but none that seemed to precisely fit this case, a drive that was recognized on one computer but not another. Both are running 10.4.11.I'm still baffled but tonight I found an acceptable alternative, a Macally 250 Firewire/USB enclosure that I had in my closet but never used previously. The Seagate drive loads on both the dualie and iBook using that enclosure, which is bulkier than the SmartDisk but right now I don't really care.
-
Windows needs to install driver software for your unknown device
Windows needs to install driver software for your unknown device
This is the message that i get when ever i plug in my ipod touch to my computer. the computer is running on vista. i dont know what to do, because i tried to follow the steps suggested, but it didnt work, the computer said that it couldnt find anything and to check with apple for some driver software. HELP!!!The iPod touch and iPhone do not use the same type of USB drivers that other Apple devices use. They both require Apple Mobile Device Services to be running. Using this tech article as a guide, you can easily fix this: http://support.apple.com/kb/TS1567
-
WINDOWS 7 x64 "Unknown device" FULLY SOLVED. driver for ACPI\VPC2004. OSD is NICE
ALL OF THIS PERFECTLY WORKING WITH WIN 7 ON Lenovo Y510
Install all of your drivers but ATK tool and ACPI
1. Install ACPI driver x64 http://consumersupport.lenovo.com/en/DriversDownloads/drivers_show_627.html
2. Install Energy management tool (you may install only "utility" or with managment tool, it depends on you) from Y530 x64 version http://consumersupport.lenovo.com/en/DriversDownloads/drivers_show_640.html
2. Install ATK http://consumersupport.lenovo.com/en/DriversDownloads/drivers_show_641.html
3. Install System Interface driver http://www-307.ibm.com/pc/support/site.wss/license.do?filename=mobiles/7jif11ww.exe
All o files extracting in C:\Drivers\.... If you had some troubles with installation you may try to run setup from there.
Reboot when asked for it.
(Win 7) If some is not running try in any compatibility mode (in Vista SP1)
4.Go to folder where Energy utility installed (in my case C:\Program Files(x86)\Lenovo\Energy Management)
5.Run file DPInst.exe in Vista SP1 compatibility mode OR
5.1. Go to the device manager select unknown device (device ID ACPI\VPC2004) and install/update driver manually. Select driver in C:\Program Files(x86)\Lenovo\Energy Management (that's my folder, and I thin yours too). The file with driver is VPC.INF !!!!
I have got fully working OSD
Message Edited by pol331 on 08-04-2009 10:45 AM
Message Edited by pol331 on 08-04-2009 10:48 AM
Message Edited by pol331 on 08-04-2009 11:01 AMThanks a bunch pol331. Your post from three years ago helped me successfully install win 7 64bit!!! So if you're still around this forum here's a big thumbs up from me, muchas gracias amigo!
-
Ihave pavilion g6 2006tx with win 8.1 pro ineed driver for unknown device
driver for unknown device
This question was solved.
View Solution.Hi:
You may need to reinstall the graphics driver, but I think it is the same one you have now. It is from 2012 and so all they did was say it was good for W8.1 too.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-113258-1&cc=us&dlc=en&lc=en...
If that doesn't work, then unfortunately I don't know what the issue could be. -
Unknown Device After Recovery - NEED DEVICE DRIVER
Pavilion dv6
Windows 7 Premimum Home
My HD died and I installed a new one, did all the recovery. There is one Unknown Device -- can't find out what it is.
USB\VID_138&PID_0018&REV_0078
Can someone give me a link to this device driver pleaseHi,
Please try this:
http://ftp.hp.com/pub/softpaq/sp54001-54500/sp54362.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Thinkpad E540 Unknown Device Driver "Compatible ID" IUSB3\ROOT_HUB30
Can anyone help me resolve this issue? I have an unknown device driver. Under "Compatible IDs" in Device Manager it shows
IUSB3\ROOT_HUB30
What is this, and where can I get it's correct file?
tyDear Triceiver
Welcome in lenovo community
Can you please send us your machine serial number so that we can get you the compatible driver ?
Thanks
Alaa
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
HP Probook 6570B ACPI\HPQ6000 'unknown device' win7 32bit
Please could somebody help me?
i have a HP Probook 6570b running win7 32bit and i have an unknown device ACPI\HPQ6000 and was wondering what drivers to download,
thankyouHi ant1994
Download:
HP Mobile Data Protection Sensor
http://h30639.www3.hp.com/pub/softpaq/sp56001-56500/sp56488.exe -
DV7-3065DX - Fresh Win7 Install & 2 Unknown Devices?
Recently purchased this laptop and performed a fresh install of Windows 7 once getting home. After the install completed successfully, I noticed I have two Unknown Devices in my Device Manager that the install did not have drivers for. Ran through the Windows Update bit and still nothing. Any pointers on how to identify which two items these are so I can pull the drivers from the HP site?
To be more specific, the hardware IDs of each are ENE0100 and HPQ0004
Thanks in advance,
Message Edited by tdquiksilver on 10-27-2009 05:47 PMhi,
ENE CIR Receiver Driver
32-bit & 64-bit same for both
ftp://ftp.hp.com/pub/softpaq/sp44501-45000/sp44994.exe
HP ProtectSmart
ftp://ftp.hp.com/pub/softpaq/sp42501-43000/sp42565.exe
you may have to run this manually
after extracting run
c:\swsetup\sp42565\setup.exe
& after installing it restart PC
Regards,
EverWin
~"If my solution has helped you in any way, please click on the white start to give Kudos."~
~"Please click on the Accept as solution button if your problem has been resolved."~ -
I have a ne
I have a brand new M83 with Windows 7x64 running on it. I have run the latest System Update 5 and I am still missing drivers for one device. I have also run Windows update and have nothing left to install. Need some help trying to figure out what driver is missing please.Under the M83's Lenovo Drivers, try downloading the SCCM Package if available. It has a bunch of drivers in it. Had the same problem. Right-clicked the unknown device, selected Update Driver Software, browsed to the extracted SCCM download (include subfolders), and let it search for the driver. I believe it was an ACPI driver that was missing - which usually the Lenovo Update and Drivers utility finds on other models.
-
Hi Sir,
I am using hp notebook hp15-d003txt os window 7 64 bit.
Unkonw driver is missing. Please see in screen shot.
Here is harware id. screen shot.For any one trying to help out, these are the drivers OP have tried and failed:
http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/Unknown-Device-driver-need/m-p/4896953
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP** -
Can't find driver for unknown device in device manager on T42
Had to reinstall Windows XP on a T42 (2372k3U). Got all drivers loaded but one. Says unknown device on Intel 82801DBM LPC Interface Controller (24cc). What the heck is this thing? I thought I loaded all available drivers. Help.
use this its (TVSU) system update http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-66956 it will find the drivers for you then if you don't want to keep it you can uninstall it
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC -
HP 350 G1 ACPI\HPQ6007 *HPQ6007 Unknown Device Driver for Windows 7 Ultimate x64
Hi,
I have recently purchased HP 350 G1 latop and there is a missing driver in device manager under Windows 7 Ultimate x64 that I cannot find out what driver it is, could you please help identify the hardware and provide me link to the driver?
ACPI\HPQ6007
*HPQ6007
Thanks.
James
This question was solved.
View Solution.Hi,
Download and install HP 3D DriveGuard from the following link.
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6709431&swItemId=ob_124661_1&swEnvOid=405...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Hp compaq nc6220 unknown device driver
I recently got this laptop running smoothly again and i have one (code 28) i cant seem to find...its listed as unknown device with a yellow question mark in device manager can someone please help?
I ended up finding it myself...
here is the url if anyone else has this issue....
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32... -
Lenovo G500: unknown device
Hello,
i have new g500, win7 64 , and have problem with unknown device in device manager.
can u help me pls.
properties say " root \ lenovoVhid ".
thx
Moderator note: off-topic post moved to its own thread. Subject edited to show content. Was: Re: Lenovo -G-500Hi Preko.
I assume device manager showing a driver missing, If so right click it then click properties then update driver tab.
You may want to visit lenovo`s website & update all drivers for your laptop.
Also make sure you have the latest version of Lenovo soloution center, The latest version number is 2.3.002.
Once you have done this re-run the hardware scan, Hopefully this will solve your problem.
And welcome to the forum.
Catt
Maybe you are looking for
-
Problem in reading the FROM_TIME from CRMD_SCHEDLIN
HI , I have problem in reading the dates from the table CRMD_SCHEDLIN . what I have noticed is that if the date is stored as 2004.11.14 23:00:00 then in the display of the sales order Tx-CRMD_BUS2000115 the date is shown as one plus the date stored
-
Formatting decimal places in scatter charts???
I set up rather simple X-Y chart with numbers that have about 5 significant decimal places. All 5 numbers show up in the X chart axis labels. I can't find any way to tell Numbers to use only two decimal places in the chart labels. Does anyone know ho
-
Mysql query (search multiple tables in database)
I have 12 tables in a database - january through to december. I need to search all 12 tables for 'keyworrd' phrases submitted by the user through a search form. Must be a more streamlined way of doing it than below using 'UNION'. I have incorporated
-
Not finding the Backend Odata Channel in SPRO
Hello Experts, As i installed the IW_BEP component on backend system , so i would be able to create and assign model class to services and also would be able to create services , but when i hit the Tcode SPRO and try to find the S
-
ESS/MSS Multiclient Szenario
Hello, The scenario we want to build is: - Have one portal - Have one J2EE Engine - Have one backend with TWO clients (e.g. 100 and 200) - Have ESS/MSS running and connect to both clients (multiclient szenario) What has been done so far: 1) Copied fo