T440s windows 10 upgrade failed due to lack of Lenovo driver for ac-7260

Anyone know when or where Lenovo will release / has released a windows 10 compatible driver for the Intel Wireless ac-7260 wifi adapter (mine is in my T440S)? Currently it's not possible to upgrade because the wifi adapter fails to operate correctly and I can find no update from Lenovo for my notebook and the ac-7260 adapter on the site that supports windows 10.     I also tried the Intel "generic" drivers but that failed to resolve the problem. I tried many things and just could not get it to work for many different reasons that all boiled down to the adapter driver failing to work and giving errors or simply not working at all. Now  that Windows 10 is released surely Lenovo has an adapter driver somewhere for it? 

RESOLVED: Turns out I had an "Array networks" SSL VPN client installed as part of my Softlayer ISP's remote desktop package, not Cisco at all but caused the same exact problem. I had to uninstall it completely and have since found out it doesn't work at all with Windows 10 and there is no timeframe to have it updated and Array networks or maybe just Softlayer apparently haven't gone out of their way to inform the public. Thank you guys for your help and I hope others in future will benefit from this post.

Similar Messages

  • CSCul50066 - Upgrade fails due to lack of disk space in the /common partition

    I noticed this has only 1 and 2 star ratings after bumping into this issue myself, so I figured I would help out the original poster and others who are experiencing this issue.
    Presumably, the original poster is intending to advise that we read the CUCM 10.0(1) Upgrade Guide, and view the Pre-Upgrade Tasks therein.  These (the bullet points below) seem to be the salient options contained in that section.  I used the "Free Common Space COP file" option to resolve my disk space issue and allow my upgrade.  I found the .cop file in the following download area on CCO:
    Downloads Home
    Products
    Unified Communications
    Call Control
    Unified Communications Manager (CallManager)
    Unified Communications Manager Version 10.0
    Unified Communications Manager / CallManager / Cisco Unity Connection Utilities-COP-Files
    It is called:  "VMware Disk Size Reallocation COP file: This COP file allows UCM VMs to increase the size of their vDisk(s) without requiring a system rebuild. 
    ciscocm.free_common_space_v1.1.cop.sgn "
    • Use the Cisco Log Partition Monitoring Tool to adjust the low and high watermarks to reduce the traces
    and remove unnecessary log files. Cisco recommends that you adjust the low watermark value to 30,
    and the high watermark value to 40. After the upgrade, you must restore the high and low watermarks
    to their original values in order to avoid premature purging of traces. The default value for the high
    watermark is 85. The default value for the low watermark is 80. For more information about using the
    Cisco Log Partition Monitoring Tool, see the Cisco Unified Real-Time Monitoring Tool Administration
    Guide.
    • Use the Disk Expansion COP file (ciscocm.vmware-disk-size-reallocation-<latest_version>.cop.sgn) to
    expand the vDisk size if your virtual environment has additional available disk space. Ensure that you
    review the Readme file that supports this COP file before you proceed.
    • Use the Free Common Space COP file (ciscocm.free_common_space_v<latest_version>.cop.sgn). This
    COP file removes the inactive side in the common partition to increase available disk space without
    requiring a system rebuild. Ensure that you review the Readme file that supports this COP file before
    you proceed.
    • Manually remove outdated or unused firmware files from the TFTP directory. You can remove these
    files using the TFTP File Management page in the OS Administration interface, or you can use the file
    list tftp and file delete tftp commands from the command line interface.

    I noticed this has only 1 and 2 star ratings after bumping into this issue myself, so I figured I would help out the original poster and others who are experiencing this issue.
    Presumably, the original poster is intending to advise that we read the CUCM 10.0(1) Upgrade Guide, and view the Pre-Upgrade Tasks therein.  These (the bullet points below) seem to be the salient options contained in that section.  I used the "Free Common Space COP file" option to resolve my disk space issue and allow my upgrade.  I found the .cop file in the following download area on CCO:
    Downloads Home
    Products
    Unified Communications
    Call Control
    Unified Communications Manager (CallManager)
    Unified Communications Manager Version 10.0
    Unified Communications Manager / CallManager / Cisco Unity Connection Utilities-COP-Files
    It is called:  "VMware Disk Size Reallocation COP file: This COP file allows UCM VMs to increase the size of their vDisk(s) without requiring a system rebuild. 
    ciscocm.free_common_space_v1.1.cop.sgn "
    • Use the Cisco Log Partition Monitoring Tool to adjust the low and high watermarks to reduce the traces
    and remove unnecessary log files. Cisco recommends that you adjust the low watermark value to 30,
    and the high watermark value to 40. After the upgrade, you must restore the high and low watermarks
    to their original values in order to avoid premature purging of traces. The default value for the high
    watermark is 85. The default value for the low watermark is 80. For more information about using the
    Cisco Log Partition Monitoring Tool, see the Cisco Unified Real-Time Monitoring Tool Administration
    Guide.
    • Use the Disk Expansion COP file (ciscocm.vmware-disk-size-reallocation-<latest_version>.cop.sgn) to
    expand the vDisk size if your virtual environment has additional available disk space. Ensure that you
    review the Readme file that supports this COP file before you proceed.
    • Use the Free Common Space COP file (ciscocm.free_common_space_v<latest_version>.cop.sgn). This
    COP file removes the inactive side in the common partition to increase available disk space without
    requiring a system rebuild. Ensure that you review the Readme file that supports this COP file before
    you proceed.
    • Manually remove outdated or unused firmware files from the TFTP directory. You can remove these
    files using the TFTP File Management page in the OS Administration interface, or you can use the file
    list tftp and file delete tftp commands from the command line interface.

  • OS is Mountain Lion, upgraded no problems, used an external Hard drive for my time machine, now my iPhoto will not show any of my photo's or ay new ones I import! Help please!!

    OS is Mountain Lion, upgraded no problems, used an external Hard drive for my time machine, now my iPhoto will not show any of my photo's or ay new ones I import! Help please!!

    Do you get this window when you hold down the Command+Option keys and launch iPhoto?
    If not then you're not holding down both keys long enough.
    OT

  • Windows 7 64 bit is unable to locate driver for my 7 gen nano.

    Windows 7 64 bit is unable to locate driver for my 7 gen nano.

    Thanks for the tip. What I wonder though is should I do that or does the 64-bit client have a 32-bit layer that works with 32-bit applications or, am I forced to still deploy a 32-bit client because of my 32-bit software?
    Thanks

  • Windows 7 will not let me update the driver for my iphone 4s so I can see it in iTunes. Any suggestions?

    Windows 7 will not let me update the driver for my iphone 4s so I can see it in iTunes. Any suggestions?

    You turned off all firewall and antivirus ? You could try downloading the update via a browser - what device are your trying to download the update for ? If it's an iPhone 4 :
    GSM / sim card model
    CDMA model
    Then in iTunes press and hold the shift key on Windows when clicking the Check For Updates button which should let you navigate to the downloaded file

  • ITunes upgrade fails due to QuickTime

    I tried to upgrade my iTunes to version 9.3.xx. Unfortunately the upgrade failed. The application since then is not opened and the following error message appeared.
    “Error writing the file c:\Program Files\Quick Time\QTTask.exe
    Verify that you have access to that directory”
    I followed all the support suggestions uninstalling all the Apple applications and re-installed them back but with no luck. The above message appears every time iTune is trying to install QuickTime and as iTunes needs QuickTime the whole upgrade fails.
    Any suggestion how I can solve this issue?
    BR// Markos

    “Error writing the file c:\Program Files\Quick Time\QTTask.exe ... Verify that you have access to that directory”
    That's consistent with disk/file damage, Markos.
    Let's first try running a chkdsk over your C drive. There's instructions and a guided help in the following Microsoft document:
    [How to perform disk error checking in Windows XP|http://support.microsoft.com/kb/315265]
    Does the chkdsk find/repair any damage? If so, are you able to successfully reinstall QuickTime afterwards?

  • Leopard install fails with panic: "Unable to find driver for this platform"

    I have an early 2006 20" iMac with OSX 10.4.11 installed. Running perfectly with latest Firmware, permissions repaired, just perfect. I now want to upgrade to OSX 10.5, so I insert the Leopard Install DVD, reboot, and then to my horror a kernel panic, screen goes black with message panic(CPU 0 ...): "Unable to find driver for this platform", with the usual boxed message about holding the start button.
    Grateful for any help.

    I finally managed to install Leopard by using a 2nd iMac to read the install DVD, and using firewire and Target Mode as described in http://reviews.cnet.com/8301-13727_7-10327225-263.html?tag=mfiredir . This seems to imply that the kernel panic is due to some hardware fault with my iMac's optical drive.

  • ITunes fails due to lack of Quicktime

    A few weeks ago, I had been using iTunes 6 just fine, until I decided to download my first song in a while, and it prompted me to update to iTunes 7. No big deal, I thought. They design these things to be user-friendly. I'll have my song in a few hours.
    I downloaded iTunes 7 and Quicktime, installed them as directed, but when I attempted to open iTunes, I got the infamous "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience" error message, which asks if I want to report the problem to Windows. Saying no, I tried to open iTunes again, to the same effect. I realized the problem was with Quicktime when a couple other programs I have that rely on it wouldn't open, with the same problem.
    I've gone through Apple's support pages, and uninstalled iTunes. But when I go to uninstall Quicktime, it cannot complete the uninstallation due to a "fatal error." I also cannot reinstall, because apparently I have a "newer version" already installed. I've tried downloading the standalone version of Quicktime, but that got a similar "newer version" message.
    (I cannot even do a system restore, because apparently while manually deleting files (as Apple instructs in its "uninstall iTunes" help bit), I've deleted something that cannot be restored with System Restore.)
    How can I get Quicktime functional again?
    Dell Inspiron 1100 Windows XP
    Dell Inspiron 1100 Windows XP

    I kept a handy little log of what I was doing as I followed your instructions:
    I've downloaded the Windows Installer Cleanup Utility, found that there was a Quicktime listing, and removed it.
    There are no iTunes listings in my add/remove programs list.
    When I now try to uninstall Quicktime, I get the message, "Quicktime Streaming Authoring failed to load because the versions of Quicktime Streaming and Quicktime Streaming Authoring do not match," and then "Quicktime Streaming Extras failed to load because the versions of Quicktime Streaming and Quicktime Streaming Extras do not match."
    Then the "Installer VISE uninstall application has encountered a problem and needs to close. We are sorry for the inconvenience." (The error report indicates a "ModName" of "quicktime.qts")
    I freshly downloaded standalone QT and iTunes 7.0.2
    I restarted my computer (trying to follow directions on the "Removing iTunes and QuickTime for Windows" page. (it's worth noting that the little QT shortcut icon has been replaced with a Windows default)
    I deleted all the iTunes, iPod, and QT files and folders it wanted deleted.
    While emptying the recycle bin I got "Cannot delete Dc25 file" (or something like that) "because it is being used by another program. Please close the program and try again." I closed all programs except for the explorer window showing the recycle bin, but I kept getting the same message, so I skipped the "empty recycle bin" step. ;(
    I restarted my computer once more (as per instructions)
    QT standalone has been successfully installed (w00t)
    I restarted my computer.
    iTunes successfully installed. (*major celebration*)
    And ... cringes iTunes opened successfully and is currently compiling my Library!! THANK YOU!!
    I seriously owe you my life or something. If this wasn't the internet, I would bake you cookies or some such similar pastry. THANK YOU SO MUCH! kowtows

  • Networkmanager 3G connection failed due to lack of /var/locs directory

    By far the packages that give me the most pain on upgrades is network-manager / modem-manager combo. This last time i was having it fail like this:
    Jul 8 01:44:22 renata NetworkManager[1053]: <info> Activation (ttyACM0) Stage 3 of 5 (IP Configure Start) started...
    Jul 8 01:44:22 renata NetworkManager[1053]: <info> (ttyACM0): device state change: config -> ip-config (reason 'none') [50 70 0]
    Jul 8 01:44:22 renata NetworkManager[1053]: <info> starting PPP connection
    Jul 8 01:44:22 renata NetworkManager[1053]: <info> pppd started with pid 1328
    Jul 8 01:44:22 renata NetworkManager[1053]: <info> Activation (ttyACM0) Stage 3 of 5 (IP Configure Start) complete.
    Jul 8 01:44:22 renata pppd[1328]: Plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so loaded.
    Jul 8 01:44:23 renata kernel: [ 154.870138] PPP generic driver version 2.4.2
    Jul 8 01:44:23 renata kernel: [ 155.078468] NET: Registered protocol family 10
    Jul 8 01:44:23 renata kernel: [ 155.085942] ADDRCONF(NETDEV_UP): eth0: link is not ready
    Jul 8 01:44:23 renata kernel: [ 155.088396] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    Jul 8 01:44:23 renata pppd[1328]: pppd 2.4.5 started by root, uid 0
    Jul 8 01:44:23 renata pppd[1328]: Exit.
    Jul 8 01:44:23 renata NetworkManager[1053]: <info> (ttyACM0): device state change: ip-config -> failed (reason 'ip-config-unavailable') [70 120 5]
    Jul 8 01:44:23 renata NetworkManager[1053]: <warn> Activation (ttyACM0) failed.
    Jul 8 01:44:23 renata NetworkManager[1053]: <info> (ttyACM0): device state change: failed -> disconnected (reason 'none') [120 30 0]
    Jul 8 01:44:23 renata NetworkManager[1053]: <info> (ttyACM0): deactivating device (reason: 0).
    After a lot of head-scratching and a lot of searching this bbs for the failed (reason 'ip-config-unavailable') snippet that seemed to me to be the culprit, i ended up finding another log file telling me that:
    Jul 8 01:44:22 renata pppd[1328]: Plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so loaded.
    Jul 8 01:44:23 renata pppd[1328]: pppd 2.4.5 started by root, uid 0
    Jul 8 01:44:23 renata pppd[1328]: Can't create lock file /var/lock/LCK..ttyACM0: No such file or directory
    Jul 8 01:44:23 renata pppd[1328]: Exit.
    Checked if i had a /var/lock dir, no. Created said dir, with write permission for users group, am writing this through the connection that just started working. I have absolutely no idea whether this is a liability, to have this dir with that write permission, of if i should do something different. Also, i have no idea why i didn't have such a normal-sounding dir... Anyway, i'm posting it just in case anyone bumps into the same criptic ip-config-unavailable message...
    marcio

    Hi Nat,
    Thanks a lot for your response.
    I am running this ETL task from DAC. This task is a part of Daily Full load ETL. As i mentioned earlier, this task fails sporadically and failing till now. After restarting the ETL, it gets completed.
    Please let me know if you have any question.
    Thanks,
    Neeraj

  • [Solved] Dovecot upgrade failed due to file conflicts

    yaourt -Syu failed this morning do to file conflicts with dovecot.  Here is the output:
    :: Starting full system upgrade...
    warning: iscan: local (2.15.0.3-1) is newer than archlinuxfr (2.8.0-3)
    resolving dependencies...
    looking for inter-conflicts...
    Targets (10): libcups-1.3.10-1 cups-1.3.10-1 libmysqlclient-5.1.34-1 dovecot-1.1.14-1
    ffmpegthumbnailer-1.5.0-1 mysql-clients-5.1.34-1 mysql-5.1.34-1 recordproto-1.13.2-2
    renderproto-0.9.3-2 subversion-1.6.1-3
    Total Download Size: 51.88 MB
    Total Installed Size: 148.31 MB
    Proceed with installation? [Y/n]
    :: Retrieving packages from extra...
    libcups-1.3.10-1-x86_64 185.2K 106.8K/s 00:00:02 [#########################################################] 100%
    cups-1.3.10-1-x86_64 3.0M 121.0K/s 00:00:26 [#########################################################] 100%
    libmysqlclient-5.1.... 12.2M 120.9K/s 00:01:44 [#########################################################] 100%
    dovecot-1.1.14-1-x86_64 3.2M 120.2K/s 00:00:28 [#########################################################] 100%
    mysql-clients-5.1.3... 278.2K 122.2K/s 00:00:02 [#########################################################] 100%
    mysql-5.1.34-1-x86_64 25.9M 122.4K/s 00:03:36 [#########################################################] 100%
    recordproto-1.13.2-... 4.0K 226.0K/s 00:00:00 [#########################################################] 100%
    renderproto-0.9.3-2... 16.7K 86.4K/s 00:00:00 [#########################################################] 100%
    subversion-1.6.1-3-... 6.9M 118.3K/s 00:01:00 [#########################################################] 100%
    :: Retrieving packages from community...
    ffmpegthumbnailer-1... 64.9K 119.1K/s 00:00:01 [#########################################################] 100%
    checking package integrity...
    (10/10) checking for file conflicts [#########################################################] 100%
    error: could not prepare transaction
    error: failed to commit transaction (conflicting files)
    dovecot: /usr/lib/dovecot/imap exists in filesystem
    dovecot: /usr/lib/dovecot/pop3 exists in filesystem
    Errors occurred, no packages were upgraded.
    Should I remove /usr/lib/dovecot/imap and /usr/libdovecot/pop3 and continue the upgrade, or is there a problem with a package?
    Jay
    Last edited by jt512 (2009-04-18 17:32:31)

    Abelian wrote:
    http://www.archlinux.org/news/444/
    yaourt -Syuf should do it
    next time don't do it again.
    just pacman -Sf package and then pacman -Su

  • The following error has occurred: Upgrade Failed due to the following Error.The error code is :-2147467259.Message:Unspecified error

    I mention my problem above, After show the error Shows another message box with try again and Cancel options. I have no choice finally i click cancel. Then setup shows several message boxes. Finally setup was failed. I referred several web sources but i
    can't solve this issue.
    I have Windows 7 32-bit machine, Intel Core i3 processor,4 GB RAM, Visual Studio 2010 SP1.

    I searched my issue on the internet found issues on the forums. Someone told this error becoz of visual studio and aslo instruct to verify the Devenv.exe Config is in the correct folder. But it shows the error again. "Cannot find the the specified file".
    I Restart my computer and again install only the database engine it also show some error.
    The following error has occurred:
    Failed to open the registry key SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10.MSSQLSERVER1\MSSQLServer\SuperSocketNetLib or set its security descriptor: Attempted to perform an unauthorized operation..
    For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.0.2531.0&EvtType=OpenKeyOrSetDescFailed
    Hi Sarath Jasrin,
    According to your description, this error happens since some registry keys that need to be fixed do not have administrator access.We need to verify if you run setup.exe as administrator, and the account have permission to access the installation folder.
    I recommend you open up the registry and navigate to the registry key with the issue can give the administrator access to the registry key, and then try to updata again.
    Thanks,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • Windows Update Failed Due To Services Stopped

    Generally, the Windows Update issue can be caused by one of the following factors:
    I. The Windows Update service has been stopped.
    II. Corrupted Windows Update Temporary folder.
    In order to narrow down the cause of this issue and resolve it, you can refer to the following steps. After finishing each step, please check the result again on the Windows Update website.
    NOTE: Some third party programs can affect the Windows Update service. If you are running any third party applications such as Spyblocker, Internet or web accelerators (programs designed to boost the speed of the Internet connection), security or anti-virus programs (Norton, McAfee, etc.), I recommend we temporarily disable or shut them down and then try accessing Windows Update later. Please understand that you are disabling these programs only for the purpose of troubleshooting and you can re-enable these programs after your finish troubleshooting.
    Step 1: Verify the relevant Windows Update services
    I. Click the " Start " Button, in “ Search ” bar, type: " services.msc " (without quotes) and press Enter. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
    II. Double click the service " Windows Update ".
    III. Click on the " General " tab; make sure the " Startup Type " is " Automatic " or " Manual ". Then please click the " Start " button under " Service Status " to start the service.
    IV. Please repeat the above steps with the " Background Intelligent Transfer Service " service.
    You can also temporarily stop these services, restart the computer, and then start these services again.
    Step 2: Rename the Windows Update Softwaredistribution folder
    This problem may occur if the Windows Update Software distribution folder has been corrupted. You can refer to the following steps to rename this folder. Please note that the folder will be re-created the next time you visit the Windows Update site.
    I. Close all the open windows.
    II. Click the " Start " Button, click " All programs ", and click " Accessories ".
    III. Right-click " Command Prompt ", and click " Run as administrator ".
    IV. In " Administrator: Command Prompt " window, type in " net stop WuAuServ " (without the quotes) and press Enter.
    Note : Please look at the cmd window and make sure it says that it was successfully stopped before you try to rename the folder.
    V. Click the Start Button, in the " Start Search " box, type in " %windir% " (without the quotes) and press Enter.
    VI. In the opened folder, look for the folder named " SoftwareDistribution ".
    VII. Right-click on the folder, select Rename and type " SDold " (without the quotes) to rename this folder.
    VIII. While still in the " Administrator: Command Prompt " window, type the command " net start WuAuServ " (without the quotes) in the opened window to restart the Windows Updates service.
    Note : Please look at the cmd window and make sure it says that it was successfully started .
    Clicking Kudos! Is a nice way to say Thank You if this helped you or resolved your problem. Also " Accept It As A Solution" so that others get a benefit from it..
    - Aves..

    thanks phillip, i did that, and i also did it again when the tech who 
    called me back asked me to do that. it did not work  I don't know what 
    else to do,
    i bought adobe package for school which has everything for creative 
    suite, can i reload disc and only reinstall adobe acrobat and reader? 
    those are the only two i am having issues with
    btw, i scheduled two call back times, and after they called me back 
    from adobe, i was put on hold for a long time, when the person finally
    answered, i was disconnected, tried a second attempt, it happened 
    again, no return phone call from them, i wasted over 3 hours last 
    night, with still no solution.

  • Back Up Failed Due to lack of space on Time Capsule

    I purchased a new mac...was able to recover the data off my time capsule just fine...then returned the mac after getting my old mac back from repair....and I haven't been able to back up to my time capsule since...I keep recieving the following error...
    This backup is too large for the backup disk. The backup requires 224.69 GB but only 178.45 GB are available.
    Time Machine needs work space on the backup disk, in addition to the space required to store backups. Open Time Machine preferences to select a larger backup disk or make the backup smaller by excluding files.
    I have no problems removing data from my time capsule to make room for a back up, but I don't know how...I just don't understand why it's not removing the old backups automatically to create the new back as it did in the past before I switch b/w the new mac back to my old mac...
    Please advise...Thank you

    Download http://support.apple.com/kb/DL148
    Earse the time capsule then do a back up..

  • Backup failed due to lack of space

    Hi Folks - hoping this is an easy question, i have been a happy Time Capsule users for well over a year now - never really had to touch it - today its run out of space - I just now have to many files, movies, photo's etc - the TC is 500GB - can I simply add a 1GB external USB drive and use that as my TC backup drive in place of the 500GB internal?

    mynameisearl wrote:
    can I simply add a 1GB external USB drive and use that as my TC backup drive in place of the 500GB internal?
    yes.
    JGG

  • Jabber for Windows Login failed with - "Must change at Next Login" for CUCM Authentication

    Jabber for Windows users cannot login when "User Must Change at Next Login" is selected in the CUCM credential Policy
    I found this Bug-ID: CSCuh84476
    https://tools.cisco.com/bugsearch/bug/CSCuh84476
    We use Jabber for Windows 9.7.4!
    I just want to know if there are other users have the same problem and which workaround they applied.
    I’m currently testing a User with different Policy credentials (Credentials expire after 1 day).
    I think this will also lead to a “username or password wrong”-popup but tomorrow I will see it myself ;)
    The planed workaround for us will be to set the “User Must Change at Next Login ” option and the users first have to login at UCM-Userpage to change their initial password.
    BTW: Maybe somebody from Cisco know when this get fixed?
    Best regards
    Franz

    J4W does rely very heavily on DNS, you should at least all required entries to hosts and lmhosts.
    How are your servers defined under system -> server??
    Are you able to log into UCMuser page??
    Have you properly configured all user/device/line association, and created the necessary service profiles???

Maybe you are looking for