T440s Windows 8.1 Pro and USB 3.0 dock not recognising DVI LCD panel

Perhaps somebody could help me here.
When I connect the USB 3.0 dock to my T440s, I then cannot get the second LCD monitor to be recognised by Windows via the USB3.0.
The monitor is not being recognised as it is is not seen as one of the optional displays in the 'Intel HD Graphics control panel' window.
The driver however for the second monitor is fully up to date and it works fine when I connect the LCD to the VGA port directly on my computer. Also the second monitor is being recognised partly by the windows OS as it comes up as a second screen under the 'screen resolution' window.
My set up is shown below. I am thinking that perhaps there is an issue with either the NVIDIA or Intel HD graphics chip. I read somewhere that windows uses one or the other depending on the load. I am worried that there is some problem with that mechanism.
Can anyone help or give me some advice on this? All driver are up to date.
John
System Unit
Nvidia GT730M Graphics without docking connector
Processor
4th Gen Intel Core i7-4600U Processor (4MB Cache, up to 3.30GHz)
Display Panel
14.0" FHD IPS With WWAN
Solved!
Go to Solution.

I have found a workaround - disable the nvidia card

Similar Messages

Windows 8.1 pro and vpn client issue

dear support community ,
Am using windows 8.1 pro and cisco vpn client version 5.0.0.7.0410
.my issue is that am able to connect to the VPN succesfully but when connected i cant ping nodes inside the VPN
whereas when i do the same test with a windows 7 and xp PCs , am able to ping and even remote desktop nodes.
someone help please ??

funniest thing is , after using my PC for two weeks and doing regular updates , am now able to ping and RDP to nodes
inside the VPN..:-)

I have just updated my computer to windows 8.1 pro and i dont see adobe acrobat pro x1

i have just updated my computer to windows 8.1 pro and i dont see adobe acrobat pro x1

Download CS3 products
Mylenium

In my macbook pro hdmi, usb & SD card reader not working

In my macbook pro hdmi, usb & sc card reader not working.
i have tried the SRM reset done, till not working started.
Could you please resolve this problem,

Welcome to Apple Support Communities
Simply take it to an Apple Store or reseller if it's in warranty. Your Mac will be repaired or replaced for free because it looks a hardware problem rather than a software issue.
If it's not in warranty, hold Command and R keys while your MacBook is starting up, and reinstall OS X. If it doesn't work, you can't do much more to solve the problem

I need help. I need a KVM to switch between my Mac Pro and my IBM ThinkPad (docking station).

I need help. I need a KVM to switch between my Mac Pro and my IBM ThinkPad (docking station).
Best Buy (only local option) has only a VGA / USB from iogear that scroll lock doesn't work on the Mac and low and behold I'm a d.a. and didn't notice VGA, ie: want/need DVI.
I don't game on my Mac or do high-end video editing but don't want to step down the video quality too much.
Appreciate all of the forthcoming advice.
Jason

I guess I should have clarified and said "can you please share what you've used and been successful with"
Two that I have been considering are:
ConnectPRO
http://www.connectpro.com/prod_kvm_usb12plusDvi.html
IOGear
http://www.iogear.com/solutions/kvm/?view=displayDVI
If you do the Belkin KVM wizard, as soon as you reference a Mac, they only support VGA and I am not sure why. http://www.belkin.com/kvm/
Thanks for the effort.
Jason

When i open finder the windown is a completely blank grey box with the title "Window" as a header, and all my folders will not open when clicked

when i open finder the windown is a completely blank grey box with the title "Window" as a header, and all my folders will not open when c
the problem started when my computer screen broke from something falling on it, the screen was replaced but the people that fixed it for me told me there may be some hard disk issues when a problem like this happens, they ran their own checks and found nothing and i was given my laptop back, then when i tried to use it, i found this problem. everything else works fine.
i have shutdown and re-started my computer multiple times and i have also re-started finder multiple times, both having no effect
i have also done a few other things to find that my apple.com.finder.plist and apple.com.sidebar.plist are both missing, and are not re-creating themselves, i have found no way to bring them back either.
any help would be greatly appreciated, thanks

there is an app called daisydisk on mac app store which will help you see exactly where the memory is focused and consumed try using that app and see which folders are using more memory

I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out. I looked at system settings on trackpad and it is set, but does not work How do I get it started?

I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out. I looked at system settings on trackpad and it is set, but does not work How do I get it started?

This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
Here's the link for the safeboot
http://support.apple.com/kb/HT1564?viewlocale=nl_nl

HT201343 I just verified that i have an early 2011 Macbook Pro and the airplay icon does not appear. i also have a 2013 Macbook Pro which shows the airplay icon. do i need to enable airplay on my early 2011 or is there an update that is needed? Confuse

I just verified that i have an early 2011 Macbook Pro and the airplay icon does not appear. i also have a 2013 Macbook Pro which shows the airplay icon. do i need to enable airplay on my early 2011 or is there an update that is needed? Confused.

To check your model go to About This Mac (by clicking on the Apple icon, top left) and then select more info. If you wish to use mirroring you will need one from 2011 or later running OSX 10.8 or later. The alternative would be to use 3rd party software like Airparrot.
About AirPlay Mirroring in OS X

Windows 8.1 pro and VPN client 5.0.07.0290-k9

We are using windows 8.1 pro in our dell brand desktop. Our users access the client machine through vpn. We are using VPN client version 5.0.07.0290-k9.
That is working fine.
Issue:
I have a Cisco router RV325. I am Configured Easy vpn in my router.Then i am using the same cisco vpn client and the same OS.
Result is not getting ping. but vpn is connected good.

I'm no expert, but do you have ICMP allowed in your tunnel?

Windows 8.1 Pro and hppiw.exe

Hi,
I'm trying to install on my new PC (Windows 8.1 Pro 64bit) the drivers needed to use an Officejet Pro K850 printer installed on our LAN.
From HP website I downloaded hppiw.exe as suggested but I cannot make it run.
After double-click it starts to look for devices and then suddenly exits without any alert.
Windows Event Viewer shows 2 new entries:
Application error: 1000
Exeption code: 0xc0000005
Offset error 0x0000196b
Windows Error Reporting
Bucket errato -498820676, tipo 1
Nome evento: APPCRASH
Risposta: Non disponibile
ID CAB: 0
Firma problema:
P1: hppiw.exe
P2: 3.1.0.19
P3: 521742c3
P4: hppiw.exe
P5: 3.1.0.19
P6: 521742c3
P7: c0000005
P8: 0000196b
My Lenovo laptop every day tells me it found a new printer (K850) but when I try to install it it says I don't have any driver for that.
Any hint to solve the problem?
Thanks

Hi @Lucas-BS
There is no full feature software and driver for Windows 8 let alone 8.1. You can try an in-OS driver. Please take a look at the instructions for Windows 8, they may help even though you have 8.1; Install a Windows 8 Driver with Windows Update.
I hope this helps.
If you still can not get the printer to work with your computer, I suggest calling us. we might be able to get you a discount on a newer model. If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

USB 3.0 host controller and USB Root Hub xHCI not showing up on Windows 8.1 laptop

Greetings and thank you for taking the time to read the following message and 'maybe' attempt to help me with my current plight...
I have an HP envy m6 laptop running Windows 8.1 and Windows 7. The problem i am facing at current is that i have only 1 out of 4 usb ports working on my Windows 8.1 partition however on my Server 2012 partition, all four ports are working fine. After asking
around i have come to the conclusion that i'm having a driver issue. I compared what was present on the Windows 7 USB controllers (in Device Manager) to what was present on the Windows 8.1 controllers and i found that my Intel(R) USB 3.0 extensible host controller
- 0100 (Microsoft) and my USB Root Hub (xHCI) was missing on my Windows 8.1 partition.
Now for some background....the problem first occurred when i was trying to solve an external hard drive issue in which none of my external hard drives where showing up when i plugged them into my usb ports, i came across an online solution telling me to
uninstall all my USB drivers in device manager, restart the laptop and let the computer re install the drivers automatically, the result was that i only had 1 out of 4 ports working. Could someone please point me in the right direction in order to fix this
problem?

Windows 8 has native USB 3.0 drivers which explains why you are not seeing an option to roll back. I do not believe you can make the Windows 7 driver work. Have you tried uninstalling in the device manager all usb items and then rebooting to let the drivers reload? Do that with the computer off the dock and then plug it into the dock. As a general rule you should not do driver updates to a laptop through a docking station.

X1C / Windows 8 and USB 3.0 Dock (0A33970)

I just received my USB 3.0 dock for use with my X1C running Windows 8 x64.
The drivers that are supplied with the dock do not work properly with Windows 8.
DisplayLink has update drivers however that fix the problem and the dock works great
http://www.displaylink.com/support/downloads.php
I installed the drivers that came on the disk and then installed the drivers in the link above over top of them.
Hopefully this helps others who might be in the same boat
Josh

That's good to know. Are you driving two external LCD panels with the dock?
If so, what make, model and native resolution do the panels have?

MacBook Pro Retina USB 2.0 devices not working in right side USB port

4 days ago I bought MacBook Pro Retina 15".
When I plug USB 2.0 device to right side USB port, it does not work. OSX does not recognize it, iPhone does not charge, and so.
When I plug the same USB 2.0 device to left side USB port, it works.
When I plug USB 3.0 device to left or right side USB ports, it works without a problem.
Does anyone have this same issue? How did you resolve it?

I have a similar issue with a 13" Retina. Both my ports work OK for most USB devices but the right one won't work with a USB external HD (Time Machine backup). Very consistant.

HT6114 I just updated the last version of OS X Mavericks on my Mac Pro and my Thunderbolt display is not working correctly

I just updated the last version of OSX Mavericks on my MAc Pro and my thunder bolt display is not working correctly. Could you please help

Reset the NVRAM/PRAM and Reset the SMC, then try again.

Retina display macbook pro and want to run two monitors with only DVI connections

I have a retina display macbook pro and want to run dual screens using two Yamakasi monitors with DVI connections what do I need to do this,

Hello TonyLoan,
Thank you for using Apple Support Communities.
For more information, take a look at:
OS X Mavericks: Connect multiple displays to your Mac
http://support.apple.com/kb/PH13814
For each display you want to use, connect a video cable (and adapter, if necessary)
About Apple video adapters and cables
http://support.apple.com/kb/ht3235
Apple Mini DisplayPort to DVI Adapter
Have a nice day,
Mario

T440s Windows 8.1 Pro and USB 3.0 dock not recognisin​g DVI LCD panel

Similar Messages

Maybe you are looking for

T440s Windows 8.1 Pro and USB 3.0 dock not recognising DVI LCD panel