T450S and WIN8.1, "resume from deep sleep" woes

I installed retail win 8.1 on my T450S. I prepared the "Intel resume" partition at the end of the disk.
Now when it returns from deep sleep it randomly selects between the intel partition (displays "resuming from deep sleep" in preboot screen) and Windows own deep sleep state. ( displays the Lenovo logo and the windows "rose" in preboot screen)
Maybe the intel partition is not needed on win 8.1 ?
Can someone please enlighten me?
PS, I run the Hyper-V hypervisor that presumably disables some of Windows sleep states.

I have a variatio of this issue. Brand new t450s ...arrived yesterday. Power management set to suspend when I close lid (battery or AC). However 50% of the time (randmonly distributed), it shuts down ... hence closes all applications etc. I called Lenovo tech support and they tried to defer me to the "premium OS support" to which I promptly declined. Its a frustrating issue as it defeats the purpose of the suspend function ... any thoughts ?

Similar Messages

Lion not waking up from Deep Sleep with File Fault 2

MBA13, 2011 - Lion 7.1: My MBA doesn't resume after deep sleep (hibernate) in combination with full disk encryption.
Waking the machine up, the logo on the back lights up but there's nothing to see on the screen. After turning off filefault, it's all ok. Do more people share this experience?
Regards

This problem has spontaneously resolved itself. Despite what I wrote in my last message, I did not turn off FileVault
Now when I run out of power (triggering deep sleep) and then plug in my computer, instead of the system hanging, I get the usual power-on FileVault unlock screen. After a few seconds (but not a full boot sequence), I then get my regular unlock screen (as if I had just woken up the screensaver).
I haven't applied any software updates (including the recent MBA EFI update), so unfortunately I can't say why this started working for me. I did recently change some settings: I set the system to only require a password 1 minute after going to sleep (instead of immediately); and I gave a second user permission to unlock the computer from power up.

Intel 3160 in 15t-k000 cannot reconnect to networks after resume from OS sleep/standby

Quite often the Intel Wireless-AC 3160 will be unable to reconnect to a network after Windows resumes from standby/sleep (or perhaps it's Windows' deeper hibernation). The only fix (other than restarting Windows) is to disable the 3160 in the device manager and then re-enable it. Upon re-enable, it immediately reconnects. This happens sporadically, not every resume.
Attempted resoluions (besides disable/re-enable workaround):
Tried multiple networks on both 2.4 GHz and 5.2 GHz bands. Updated the Intel drivers, the issue persists.
Ran Intel PROSet/Wireless "Manual Diagnostic Tool", which passes tests until "Association Test", which fails. Even "Scan Test" passes, but it just can't associate (connect?) with a network.
Windows automatic troubleshooting tool. No resolutions, useless.
EDIT: The issue looks a lot like this one on the AC 7260. No resolutions on that forum, unfortunately.
Windows 8.1Pro 64-bit
Intel Dual Band Wireless-AC 3160 driver version 17.1.0.19
As an aside question, what network cards are usable with the 15t-k###? For example, like the list here for the 15t-j###. Is there a simultaneous dual band card that can be used instead of the 3160? Thanks!

Hi @chappjc ,
Thank you for your inquiry, I am happy to try and help!
I understand that you are unable to connect to the network when resuming from sleep or hibernation in Windows 8 Pro.
If is possible that you card is not set to connect when waking from sleep mode.
Here are links to documents that I believe will help.
Troubleshooting wireless network and Internet (Windows 8)
From windows.microsoft.com:
How do I fix network adapter problems?
Windows Assessment and Deployment Kit (Windows ADK) for Windows 8.1 Update
Windows ADK Overview
On your side note, here is a link to the HP ENVY 17 Notebook PC HP ENVY 15 Notebook PC Maintenance and Service Guide. Page 19 item 5 is a list of recommended replacement cards.
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

My iMac 24" late 2006 refuses to wake from deep sleep,

My iMac is refusing to wake from deep sleep or from a shutdown, will start if I persist in either using safe mode or command mode (cmd + s)but can take many attempts, have repaired permissions and verified disk, on permissions it is constantly changing the permissions on preference panes as listed below, but this is a shortened view, there are 23 lines like this.
permissions differ on "SystemLibrary/PreferencePanes/Displays.prefPane/Contents/Resources/sk.lproj/Di splaysPref.nib" should be drwxr-xr-x they are -rw-r- -r- -
Would it be ok to trash the Preference Pane folder and let it rebuild ???
Any help welcome

Helio, you can mostly ignore repeated Permission Repairs.
To remove Prefpanes, right click on one & nchoose Remove.
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Macboor air 13 late 2010 freezes when wake from deep sleep

Hi. I have had this problem for a few months and still havent found a solution. This macbook air freezes and is totally unresponsive for five or six seconds when it wakes from deep sleep. I have tried:
1 Apple hardware test, which came up negative. No hardware problem detected
2 reset the SMC several times. No fix.
3 repaired permissions in disk utility, and also verified and repaired disk. Still no results.
4 restarted many times.
5 tried booting in safe mode, but it made the machine hang.
The only thing I havent tried yet is resetting the PRAM. in the event that that doesnt work, does anyone have any ideas. I only found thre

I think it might just depend on how often your machine does this. My MBA 13 has done what you are describing one or twice, but its a rare event. I'm not too worried about it, but you might want to contact AppleCare and see if they have any more information...
Sly

MacBook always needs to be woken from deep sleep twice

Whenever I wake my MacBook Pro (mid 2012) from "deep sleep"/"hibernation", it wakes up with the gray loading bar and brings me to the login screen as usual, but the keyboard and mouse remain unresponsive. The cursor is blinking in the "Enter Password" field and everything, but it won't recognize any input at all. It remains this way for 2 or 3 minutes, and then it shuts off again. Not just goes back to regular sleep, but back to "deep sleep", so I have to press the power button again, I get the mac chime, and the gray loading bar again, and this time it does this same thing but after about a minute it will suddenly start recognizing mouse and keyboard input.
What's up with this? Is it some driver that's taking a very very long time to load or something? This happens 100% of the time, every single time I wake my MacBook from deep sleep, without fail. Please help, this is extremely inconvenient.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Kernel panics waking from deep sleep after SSD upgrade

Hi
Kernel panics every time a 15-inch mid 2012 MacBook Pro 9,1* wakes from deep sleep** following upgrade from original HDD to an SSD***. The first SSD was replaced under warranty and the issue is still occuring. The extended Apple Hardware Test reports no issues. Following physical installation of the SSD, it was formatted—one Mac OS Extended (journaled) partition—and Yosemite (10.10.1) installed from a USB using the only-slightly-less-easy-way instructions from arstechnica. The original RAM was upgraded about a year ago with Crucial 2x8GB DDR3 1600 MHz RAM.
It is a very nice MBP if only these kernel panics could be resolved.
Marilyn
*MBP spec factory configured with 1680-by-1050 high-resolution antiglare display
**It is not clear whether or not this deep sleep is standby mode or safe sleep. It is likely to be safe sleep because when waking from this deep sleep a progress indicator appears
*** Crucial CT512MX100SSD1
Message was edited by: MrsMandM minor correction

Anonymous UUID: <removed>
Sat Jan 17 08:47:23 2015
*** Panic Report ***
panic(cpu 0 caller 0xffffff802581e80a): Kernel trap at 0xffffff80257c2e08, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000010, CR3: 0x0000000004015026, CR4: 0x00000000001626e0
RAX: 0x0000000000000000, RBX: 0x0000000000002ef0, RCX: 0xffffff8025eb9110, RDX: 0xffffff8025eac0b0
RSP: 0xffffff823735b410, RBP: 0xffffff823735b440, RSI: 0x0000000000000000, RDI: 0xffffff8025eac0b0
R8: 0xffffff805816dde8, R9: 0x000000000000000b, R10: 0xffffff8050c18550, R11: 0x0000000000100000
R12: 0xffffff8025eac0b0, R13: 0xffffff805816dde8, R14: 0xffffff823735b460, R15: 0x0000000000000000
RFL: 0x0000000000010282, RIP: 0xffffff80257c2e08, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff823735b0c0 : 0xffffff802573a811
0xffffff823735b140 : 0xffffff802581e80a
0xffffff823735b300 : 0xffffff802583a443
0xffffff823735b320 : 0xffffff80257c2e08
0xffffff823735b440 : 0xffffff8025c01df0
0xffffff823735b630 : 0xffffff8025944a27
0xffffff823735b6c0 : 0xffffff8025b35ce2
0xffffff823735b7d0 : 0xffffff8025b40b4a
0xffffff823735b9a0 : 0xffffff802593f2f8
0xffffff823735ba80 : 0xffffff802593ea95
0xffffff823735bbb0 : 0xffffff8025952005
0xffffff823735bc00 : 0xffffff802595fcc7
0xffffff823735bf20 : 0xffffff8025954f0a
0xffffff823735bf50 : 0xffffff8025c4dcb2
0xffffff823735bfb0 : 0xffffff802583ac46
BSD process name corresponding to current thread: kextd
Mac OS version:
14B25
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide: 0x0000000025400000
Kernel text base: 0xffffff8025600000
__HIB text base: 0xffffff8025500000
System model name: MacBookPro9,1 (Mac-4B7AC7E43945597E)
System uptime in nanoseconds: 12709317724256
last loaded kext at 1698741076122: com.apple.filesystems.afpfs 11.0 (addr 0xffffff7fa8472000, size 364544)
last unloaded kext at 221598330020: com.apple.driver.AirPort.Brcm4331 800.20.24 (addr 0xffffff7fa7658000, size 2043904)
loaded kexts:
com.apple.filesystems.afpfs 11.0
com.apple.nke.asp-tcp 8.0.0
com.apple.filesystems.smbfs 3.0.0
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.14.37
com.apple.driver.X86PlatformShim 1.0.0
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.3.1f2
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleHDA 267.0
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.GeForce 10.0.0
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.driver.AppleIntelHD4000Graphics 10.0.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleThunderboltIP 2.0.2
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.1f2
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleMCCSControl 1.2.10
com.apple.driver.AppleHV 1
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.AppleMuxControl 3.7.21
com.apple.driver.AppleIntelFramebufferCapri 10.0.0
com.apple.driver.AppleMikeyDriver 267.0
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleIRController 327.5
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.7.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.5
com.apple.driver.AppleSDXC 1.6.5
com.apple.iokit.AppleBCM5701Ethernet 10.1.2b3
com.apple.driver.AppleUSBHub 705.4.1
com.apple.driver.AirPort.Brcm4360 901.19.10
com.apple.driver.AppleFWOHCI 5.5.2
com.apple.driver.AppleAHCIPort 3.0.7
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleUSBXHCI 705.4.14
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.security.SecureRemotePassword 1.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 11
com.apple.driver.DspFuncLib 267.0
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOAudioFamily 200.6
com.apple.vecLib.kext 1.2.0
com.apple.nvidia.driver.NVDAGK100Hal 10.0.0
com.apple.nvidia.driver.NVDAResman 10.0.0
com.apple.iokit.IOSurface 97
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.1f2
com.apple.iokit.IOBluetoothFamily 4.3.1f2
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleHDAController 267.0
com.apple.iokit.IOHDAFamily 267.0
com.apple.driver.IOPlatformPluginFamily 5.8.0d49
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleGraphicsControl 3.7.21
com.apple.iokit.IOAcceleratorFamily2 156.4
com.apple.AppleGraphicsDeviceControl 3.7.21
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.AppleUSBMultitouch 245.2
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.CoreStorage 471
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
com.apple.driver.AppleThunderboltNHI 3.1.7
com.apple.iokit.IOThunderboltFamily 4.2.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.0
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.iokit.IO80211Family 700.52
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOFireWireFamily 4.5.6
com.apple.iokit.IOAHCIFamily 2.7.0
com.apple.iokit.IOUSBFamily 705.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 389.1
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.Libm 1
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0

System time stuck after returning from deep sleep

Hi,
When I return from deep sleep, my system time is set to when I entered deep sleep. Only after opening Date & Time system preferences, the time is corrected.
Any help is highly appreciated.
Markus

Other basic and routine maintenance is often helpful
even if the results of preventative tasks go unseen.
The use of Disk Utility's function to 'repair disk permission'
and also the ability to start the computer into SafeBoot
mode, where it is forced to check and repair system bits,
(hold shift key on startup, wait, login; at desktop, you can
also choose to run Disk Utility per above, by using GO in
the Finder menubar, and open Utilities folder> disk utility;
when done repairing disk permissions, quit; then restart)
is one of the harmless simpler single or dual acts one can do.
There are third party utility like interface tools that allow
the user to run maintenance tasks through the GUI of
that tool and not have to force them from a Single User
mode of access; these are often freeware, such as the
well known OnyX by Titanium Software. In my Macs,
once a month or more (if I feel motivated) I run OnyX's
'automation' tab selection, and check-box all of them.
And have OnyX's preferences set to restart after its done.
Some of the other options can be helpful, when you discover
their purpose and find when they can have practical worth.
In any event, some kinds of issues can be headed off; and
a good idea is to invest in some backup strategy which
gives you a few options; although I am lazy about it now, I
have made backup full bootable clones of my computers.
This is done to an external drive which supports same.
Learning ahead of a drastic need, how to use some of
the better free-running downloadable cloneware, is good.
And the idea is you can actually do most of the minor tech
work and repairs to a system (and have boot clones) at
home; especially handy when you live 100+ miles on a
road to nowhere. As some will argue, the living planet is
on a dead-end road, it is good to get out and witness life.
Being where there are no tech support persons, I have
learned to do more than I need to; and when not messed
with, tend to enjoy learning more than I'd actually need to.
In any event, hopefully things go well with these matters...
Good luck & happy computing!

X58 Pro (Pro-E) resuming from S3 sleep fails at high BCLK

Hi, I was wondering if anyone else has the same problem as me. When I have the system bclk set above ~170 MHz, S3 no longer resumes from sleep mode and simply stays at a black screen. The power and fans spin up, but the system simply hangs there. This overclock is 100% stable, as I can run prime95 and memtest for hours without errors. I'd just really like to use the S3 sleep feature if at all possible.
I tried contacting MSI tech support, but their engineers were not able to reproduce the problem.

Quote from: AntLee29 on 25-March-10, 07:25:26
Hi, I was wondering if anyone else has the same problem as me. When I have the system bclk set above ~170 MHz, S3 no longer resumes from sleep mode and simply stays at a black screen. The power and fans spin up, but the system simply hangs there. This overclock is 100% stable, as I can run prime95 and memtest for hours without errors. I'd just really like to use the S3 sleep feature if at all possible.
I tried contacting MSI tech support, but their engineers were not able to reproduce the problem.
I'm using an Eclipse SLI which is also using the X58 chipset. With every BIOS so far, I've got the same problem: When I resume from S3 sleep, the RAM timings are incorrect. Sometimes it would make the CAS Latency slower, sometimes it did reduce it from CL 9 (as specified) to CL 4 (not even manually selectable). It doesn't matter whether auto or manual RAM timings have been set in the BIOS, after S3 the timings are changed. If I hibernate, the timings are always correct. I actually use hibernate to correct the wrong timings caused by S3 sleep. Luckily, my RAM so far has been able to run all of the resulting bad timings.
I would not be astonished if the many problems with S3 sleep I've seen so far on this forum, all reported by users with X58 chipset, could be related to such a bug.
Screet

X58 Pro-E Not able to resume from S3 (sleep mode)

Not able to resume from S3 (sleep mode) if Base Clock is set over 169Mhz
ex. ASUS P6T Deluxe Mainboard fix this issue. - bios version is 1403.
from ASUS site. - Fix System may not able to resume from S3 if Base Clock is set over 170MHz.
Anybody same Problem??

Quote from: AstroRetro on 12-November-09, 21:41:14
I have the exact same issue on my X58 Pro-E.
I can confirm that from 133 to 166MHz S3 sleep works as expected. But above this, the PC appears to go to sleep normally, but cannot wake up. After pressing the power button, the drives spin up and peripherals are powered on, but bios does not load and screen stays blank. Once the PC internal speaker emitted a continuous buzz as well. Machine is unresponsive to power and reset button at this point and I need to hold power button her several seconds to force power off. Then when powering on again, the machine will fail to post again, but this time will automatically reboot, pass post and load windows with all previous applications running as if returning from hibernation.
This issue only occurs when "ACPI standby state" is set to S3 in the Bios. S1 standby state (the default) works fine at all clocks but of course leaves all the fans running. I have tried both states of "Re-call VGA Bios from S3" (Enabled/Disabled) and this has no effect on the issue.
Since this board can happily run at 200MHz FSB with my CPU, and pass all thermal and stability tests I throw at it, it is disappointing that I cannot use this very convenient feature.
I look forward to a beta bios revision to address this issue.
I have the exact same issue on my Pro-E. i've tried everything I can think of, but have had no success. Only S1 works. What's odd is that when I had everything stock, sleep mode in S3 worked great.

How can I save and upload my resume from my iPad

How can I save and upload my resume from a iPad?

what program are you using to create word processing documents? Also, you can try dropbox https://itunes.apple.com/us/app/dropbox/id327630330?mt=8

MacBook reboots from Deep Sleep

Hi all,
Recently, my MacBook 13" (early 2009) has changed its default behaviour.
Previously, when the battery drained right down while it was in Sleep, it would enter Deep Sleep and when I pressed the power button it would wake from this state with a greyed out desktop and a progress bar, before restoring to its previously saved state.
Now, it progresses to about 2/3 of the progress bar, before rebooting completely. It no longer resumes from where it was.
I changed the hard drive to a larger model a little while ago and I'm wondering if this is the cause?
Is there another simple fix, or was the previous behaviour due to its original Apple drive (a 160GB Fujitsu MHZ2160BH FFS G1) and the new Hitachi (ZK5320-320) won't be able to do the same thing?
It was running Snow Leopard (10.6.8) before and after the hard drive switch. I simply restored from Time Machine.

Same issue here, iMac late 2012.
iMac is going to sleep, dont respond to Keyboard, Mouse wake call ... fast push to Power Button and the iMac start like it was turned off ....

Imac won't wake from deep sleep

This just started a week ago- in the morning after my Imac has been asleep for a few hours, I will try to wake it by pressing the keyboard or mouse and nothing happens- powerswitch is unresponsive, I eventually have to unplug and replug to start it up. During the day it will sleep and awake normally, it just seems to happen after long periods of time. The only thing I can think of is recently there i installed an Itunes update, could this screw things up? I have a (pre intel) IMAC running OSX 10.3.9 -1.6ghz and 512MBSo far I did the following:
1. ran hardware diagnostic test from CD (passed)
2. Zapped pram (command-option, p and r during start-up)
3. File system check (fsck -yf)
4. Trashed powermanagement.plist preferences
5. Deleted system cache and repaired disk permissions
6. Reset open firmware ( reset-nvram, reset-all)
This morning I tried to wake up the imac and the same response, nothing. Sleep light pulsating, but when I touch the keys, there is no response, the imac seems to do into a deep sleep. I had to unplug and replug again. Is there anything else I can try?
This all seemed to start when I installed the latest security update and newest Itunes, could this be a connection? If so, is there anyway to uninstall these?
Imac G5 (pre-intel) Mac OS X (10.3.9) 1.6ghz/ 512MB

Henry, there are reports of problems occurring with updates, I don't think you can un-install the Security update, and as far as reverting to an earlier version of iTunes, well, you could try and extract an earlier version from your receipts folder, but I would hesitate to mess with iTunes, you might lose your entire library.
What I would recommend is an Archive and install, or perhaps an upgrade to Tiger.
Let me know what you do,
Miriam
P.S., if you'd like, go ahead and click the "Helpful" or "Solved" buttons on any of the posts / replies above if you feel they were helpful or adequately answered your question.

Build 9926 - blue screen after resume from long sleep

I installed Windows Technical Preview build 9841 in October, 4 days after it came out, via an upgrade, keeping everything, from the factory 8.1 (Toshiba with all the bloatware). The drive was almost empty at this point and I had installed only a couple
of programs when I made the upgrade. I successfully upgraded to 9860 then 9879 the day those came out, and hadn't had any issues. Two days after installing 9879, I installed Linux Mint 17 KDE on a seperate 66GiB partition. Now I run a dual boot between Windows
10 Pro Technical Preview (build 9926) and Kubuntu 15.04 Vivid Vervet preview. I hadn't had any problems with my laptop except for the very rare blue screen, until I tried installing Google Chrome Canary (under build 9879). It blue screened (BAD_POOL_CALLER
I think) and it now does it after I resume from sleep (an overnight sleep where it hibernates or something) and I lift up the login screen. I think I'm the only one with this problem, so what can I do about it? Thanks

PH
These crashes were related to memory corruption (probably caused by a driver).
Please run these two tests to verify your memory and find which driver is causing the problem. Please run verifier first
If you are over-clocking anything reset to default before running these tests.
In other words STOP!!!
If you do not know what this means you probably are not
1-Driver verifier (for complete directions see our wiki here)
2-Memtest. (You can read more about running memtest here)
Wanikiya and Dyami--Team Zigzag

Z68A-GD55 B3 Freezes when resuming from S3 sleep

When resuming (waking up) from S3 sleep, the computer freezes after about 1 second.
I've tried
* Removing all USB devices
* Disabling all USB controllers via BIOS
* Removing external video card and only using integrated graphics
* Resetting CMOS and using all BIOS defaults
* Updating to the latest official BIOS (M5)
The only clue I have is an event logged in the Event Viewer each time this happens: Driver PCI returned invalid ID for a child device (FFFFFFFFFFFFFFFF00).

This is a link to the topic I have going https://forum-en.msi.com/index.php?topic=154271.0 where I have had similar issues with the same board. The same message you receivedQuote from: bomax on 19-November-11, 11:31:36
Driver PCI returned invalid ID for a child device
is the one I got on the Blue screen freeze after flashing the BIOS. I am not freezing or BSODing now during gaming but when I come out of sleep or when I have went to shut the PC down. I am about to check the voltages but I will try you fix too. I have wondered about the BIOS for the (G3) compared to the (B3). I have the latest (B3) beta BIOS for this board, I just curious.

T450S and WIN8.1, "resume from deep sleep" woes

Similar Messages

Maybe you are looking for