T4i won't power up; tried 2 fully charged batteries and 2 sd cards

My Rebel t4i seems to have died after uploading photos yesterday.  Tried 2 fully charged batteries and 2 cards.  Checked the connections and it seems weird that the camera won't power on immediately after uploading photos.

The camera has a few power interlocks which will prevent the camera from powering up.  One is on the battery door.  One is on the SD card slot door.  There may also be one that detects if the memory card is fully seated.
Can you remove and *carefully* re-insert the memory card to make sure it's fully seated and in the correct orientation.  (label faces the back of the camera) and make sure the memory card slot door is able to close completely.  Also make sure the battery door is able to close completely.
Also make sure the doors are not damaged in any way (typically the doors have a tiny tab which engages a micro-switch.)
Tim Campbell
5D II, 5D III, 60Da

Similar Messages

  • IPad 4 won't power up though fully charged...troubleshoot?

    My iPad 4 is deader than (etc.); was fully charged, but will not power up. How do I troubleshoot if no power?

    Device Reset (won't affect settings/data/music/apps/etc)
    1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
    2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
    3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

  • HT1526 It seems to be the spotify app in my trash that won't delete. i tried the advanced tip and it deleted everything else but the spotify app. any suggestions?

    It seems to be the spotify app in my trash that won't delete. i tried the advanced tip and it deleted everything else but the spotify app. any suggestions? the progress bar when emptying the trash never changes.

    Not uncommon with spotify.   If you have 'Trashit', that will almost certainly clear it. If not, download it from here.    Download Trash It! for Mac - Force-empty your trash can. MacUpdate.com

  • Satellite P50t-A won't power on without AC Charger plugged in

    Hi there,
    I'm having an issue with the power on my P50t-A.
    History...
    For a while, I was getting less and less time out of the battery, until eventually one night it reached 0% with the AC charger plugged in, and windows telling me it "plugged-in" and "charging". It never increased from 0%, and would shut itself down.
    Given this history, I figured the battery had finally died.
    I ordered a new battery, opened up the laptop and replaced the old battery with the new one. I assumed at this point it was a no-brainer.
    I plugged the laptop back into the AC Charger, and without turning it on, let it charge up for the firs time. After several hours I noticed that the charge light remained red (as opposed to white - charged). I decided to turn the machine on to see where the charge was upto; 75%. Windows says "plugged-in" and "charging". I thought fine, I'll turn it off and let it go a bit longer.
    Came back a couple hours later to find the charge light still red. Turned on the machine to check the charge status - guess what - 75%.
    I shut the machine down, unplugged the AC charger, and hit the 'on' button... NOTHING.
    Opened up the machine, confirmed the battery connectors are plugged in - all seems OK.
    Did plenty of forum searching, some posts said upgrade the BIOS, so I did that - now has the latest (at the time, 1.9). No change.
    Tried various other updates with the Service Center application, nothing.
    Found something referring to uninstalling and re-installing a microsoft battery device driver (I didn't see what something in the OS would have to do with it, since the issue begins before boot, but I thought heck - I'm running out of things to try - I'll give it a go) - no change.
    Eventually landed on a post refering to this Toshiba post, talking about a battery reset button:
    http://support.toshiba.com/support/v...tentId=4004523
    Tried the battery reset button, with both the AC charger connected and disconnected. No luck.
    I'm now at a loss, and worried something is wrong with the motherboard.
    It's almost as if the laptop recognises the battery is there, but can't (or won't) send or draw power from it.
    Anyone seen this before, or know of a solution?
    Many thanks.

    I'm now at a loss, and worried something is wrong with the motherboard.
    I’m afraid you could be right…
    Usually the DC IN / Battery indicator will glow amber while the battery is being charged.
    In case the notebook is OFF the battery should be fully charged after about 3 hours… if the notebook is ON, the charging time would be a little bit longer… after about 6 hours the battery should be fully charged.
    In such case the Dc IN / Battery indicator should switch the status to “white”. This would indicate that the battery is fully charged…
    New batteries need to be calibrated to reach the best performance…
    Calibrating means that the battery should be discharged until its fully empty and then charged again till the DC IN/battery indicator would glow white.
    This process should be repeated two, three times until the battery recovers normal capacity.
    As mentioned, the DC IN / Battery indicator should glow amber to indicate that the battery pack is being charged. However if the LED does not glow, this indicates that power is not being supplied correctly.

  • MP3 Player (Zen Micro)won't recognize fully charged battery and won't recognize compu

    Hi All,
    Just wondering if anyone has any ideas for me. I can not download the new firmware until I can get the computer to stay connected to the MP3 Player long enough. The only way I can use the MP3 Player is if it is plugged into the wall. Any ideas of why the MP3 Player will not recognize the fully charged battery?
    Thank you?
    Kukmeri?

    Is it possible that your battery might be worn out or defecti've? If a fully charged battery only lasts a very short period, there would either be a problem with the player cutting off at the incorrect voltage or the battery itself is not capable of holding much of a charge.

  • Why batteries 75% power only once fully charged on MagicMouse?

    I am using Apple Battery Charger (including the batteries)..

    There are a combination of factors.   The batteries reach a state of charge, then relax, so to speak, and can then accept more charge.   The first figure recorded on your machine may be 100% but within minutes can drop to 80% in this 'relaxed' state.  If you take the batteries from the charger immediately the green light shows, they are rarely fully charged.   You can test this by unplugging and plugging the charger back in a few minutes later  and the light will turn to amber .. and stay that way for some time.   This second charge when the light turns green is more likely to register as 100 %.   
    Additionally, after several recharges, the batteries do not charge up quite so efficiently and last for a shorter time.   Then, if batteries are stored fully charged for a few days, they tend to run down.    And to finally confuse things, some machines do not show the correct amount of charge.
    Best to accept this relatively minor inconvenience in exchange for having charged batterioes in reserve.
    Ususally, I find the batteries are good for between14 to 17 days on an iMac.

  • My 4th gen iPod touch will not power on, will not charge anywhere, and is not recognized as plugged in by iTunes. This is irritating, as a friend had given it to me in perfect working condition because she got a new 5th gen iPod Touch.

    I just got this 4th-gen Touch from a friend because she got a new 5th-gen. when she gave it to me, the 4th-gen was in perfect working order, and I haven't used it since she gave it to me. I had put it in sleep mode and put it on my dresser, wher it has sat without being messed with for two weeks. Now, all of a sudden, it won't power on, it won't charge no matter WHERE i plug it in to charge, and not even a hard reboot has worked. My computer will not even recognize that it is even plugged in. There is no red low battery symbol displayed, nothing to make it seem as if it is charging, and, if it is charging, no response is evoked from it when I tap it, or push any buttons. The warranty on the thing has expired, and I really need to find out what is wrong with it and get it fixed. Can ANYBODY HELP ME?????????  if somebody can point me in the right direction, or even help me get it physically fixed, i am willing to give MAJOR points, and it would be greatly appreciated.

    Didn't you already post something similar: 
    Yesterday, I went and bought a refurbished 3rd-generation iPod touch, with a warranty for needed repairs in the future. When I went home after buying it, I plugged it into my computer to start charging. I plugged it in, and the battery in the iPod exploded, and now it won't power on period, even when it is plugged in or docked. I bought a warranty to go with the iPod because I figured that I was probably going to drop it, and then need it repaired. But Apple cannot even find the purchase record on file from where I bought the AppleCare warranty on it, so now I am stuck with what is now basically a paperweight. What should I do?
    iPod touch, iOS 4
    And would this be the same iPod with the fried battery?

  • OS X reports %74 keyboard battery for brand new fully charged batteries

    I just placed three brand new fully charged 2450mAh Energizer batteries into my wireless keyboard and OS X reports that it is only %74 charged. Previously I had the same result with rechargeable Duracell batteries but using non-rechargeable batteries OS X reports %100 battery when using new batteries. Is this normal?

    The reason just may be that rechargeable batteries no matter what kind (ni-cad, HMDS, or Lithium) are 1.2v batteries rather than 1.5v's like Alkaline batteries. That is why the keyboard and mouse instructions state that, "rechargeable batteries may be used." Which implies to me they are not the first choice of Apple. In all probability, the battery level is in fact calibrated for 1.5v batteries.
    No matter, rechargeable's will work fine with more frequent replacement. A handy spare set solves the problem.
    virg

  • TS4009 Unable to update payment information to complete iCloud storage renewal, tried over 4 times and different cards

    Unable to update payment information to complete iCloud storage renewal, tried over 4 times and different cards

    I had the same issue, Sent Email offering £7.99 for 25 GB. Then sent me an Email at 2.52AM saying I needed to update my payment method although they had just refunded to it. Then 7 hours later, I had tried to before work at 7AM and thought, "as it won't let me do that on my iphone, I'll do it at lunch." Sadly at 9:56 am UK time, They reduced my storage.
    Having Wasted an hour on the phone tonight, they first tried to explain that £7.99 is More than £0.79 times 12. Doh!
    That was followed with lots of being on hold and then being told "We can't go back, We Can't make a refund. We agree it was short notice and that we didn't do it well, there are lots of issues about this and also that we never offered you that (till the saw the email)" So no better off and now having to pay more for same service. That's pretty poor service all around. I have to upgrade as All my files, Backups and Emails are inoperative Till I do so.
    That's pretty bad for a company of this size, Guess they need some more bad press at the moment.

  • HT4101 Purchased new lightning connector camera kit for new mini I pad. When connecting sad card? Nothing happens unable to import any photographs ? Have already tried re booting , connecting and disconnecting card reader but nothing?

    Brand new I pad mini doesn't recognize sad camera accessory in lightning connector trying to upload photos from sad card but when connected? Nothing happens? Have already done the basics? Reboot, unplug and reconnect. Nothing? Help needed.

    All photos in DCIM folder but still no imports photo option ? When connecting card and apple accessory !
    I have older I pad 3! and older type adaptor works fine !

  • IPad Air won't turn on even after fully charging overnight and won't reset using the power and home button.

    I have tried charging the ipad over night and no matter what I do it won't turn on. I did try plugging it into my computer and itunes recognized it once, but I wasn't able to restore it. Please help. It's only 3 months past warranty.

    If you have owned the device, as in purchased from Apple, less than a year then there will be no charge to repair, or most likely, replace the device. If you have had the device more than a year you will be charged an out of warranty cost for replacement ($219 I think) and that is much cheaper than a new device. If you have Applecare+ then you have an additional year of coverage and the replacement will be $49 or $79 depending on when you got the Applecare.

  • MacBook Pro won't power up. No charger light

    I have a late 2011 MacBook Pro 15" with 2.4Ghz i7 w/ OSX 10.8.4
    I did an Apple software update today. It included updates to iTunes and i think a Thunderbolt update also. It requested a system restart so I went ahead and restarted it and left the room. When I came back in about 10 minutes later it was powered off. I tried to start it back up but it won't do anything. The light on the charger wasn't on either. I tried another socket and another charger and same thing. Before the update I had a full charge on the battery and the charger was lit up so I'm pretty sure its not an issue with the charger or battery. Tonight I looked at it again and noticed that the charger light is on its just very dim where you can berely see it.
    Has anyone seen this issue before? I have seen a few other posts similar but none where everything just died all at once. My warranty is out so I'm trying to find a way to repair it myself if possible. I use this laptop to do alot of video editing so it gets pretty hot at times. Hopefully its not damaged beyond repair. I have alot of PC repair experience but I've never messed with a Mac other than upgrading RAM.
    Thanks in advance for any responses.

    Thanks for your quick response.
    I probably should have mentioned this before but I just got it back from repair about a month ago. I had a problem with one of the USB ports not working sometimes. They replaced the logic board and both RAM sticks. I will try the SMC reset when I get home in the morning. I bought it refurbished from Apple and the warranty just ran out about 2 weeks ago so hopefully the SMC reset will do something.
    I did try removing the battery connector today for about 10 minutes but that didn't have any affect.
    Thanks again for your help.

  • My ipad wont power on, its fully charged. Does anybody know how to unlock the ipad by the home button and power button?

    please help

    You may have to hold the home and power buttons down for more than 10 to 15 seconds.  That is the normal amount of time it should take to do a soft-reset on an iDevice.  But I have had a similar problem and found that if I held the buttons down for a couple of minutes my device (iPhone, iPad, iPod) would finally unlock and start up.  You just have to be patient and hold the buttons down.  You might also try doing this with your iPad plugged into the charger.

  • Why am I getting no power when trying to charge my MacBook pro

    Adapter cord plugged in working surge bar...yet no indicator light on cord lit...no power ....unable to charge battery, use computer

    Hi, I'm having the same issue as srinuan had on Aug 8 "Adapter cord plugged in working surge bar...yet no indicator light on cord lit...no power ....unable to charge battery, use computer".  You replied ..."Have you reset the computer's SMC?" What is the SMC? I'm not even close to the computer knowledge base you have:)

  • TS3474 My nano will not power on when fully charged, screen remains black.

    Bought early 2012, no idea what generation it is. When connected to the stereo, the screen illuminates and nano works with stereo controls. When I try to take the nano for a run, when holding the power button down the screen remains black and no amount of touching the screen will produce an image or any sound. Any ideas about troubleshooting the black screen when powering up un-connected?

    Hello gatormother,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iPod nano (7th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS4433
    Will not turn on or screen remains dark
    Connect iPod to power for at least ten minutes to ensure that the battery has enough charge to allow iPod to turn on.
    If iPod does not turn on after ten minutes, try resetting it while it is still connected to power. Reset the iPod by holding down the Sleep/Wake button and the Home button for at least six seconds or until you see the Apple logo appear.
    If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes and can play music. If iPod appears in iTunes and can play music, no further troubleshooting is needed.
    If the screen remains dark and will not turn on, then your iPod may need service.
    Have a nice day,
    Mario

Maybe you are looking for

  • Socket between JAVA and AS3

    Hi all, I am trying to develop a multi player game using FLEX as the GUI and pure JAVA as the server. i want to use a message CLASS between client and server. some thing like: http://www.fireleg.com/ but i want that the communication layer will be a

  • Bootmgr missing

    After i press power button, monitor still blank and there are some text "bootmgr missing" "press ctrl+alt+del to restart". I am doing "press ctrl+alt+del" but this is not working. How to fix this problem? Help me please...

  • Crash when sending text to group chat

    Whenever i post in a group chat with me and a bunch of freinds my skype crashes. This has been an issue since the last many versions, and i just updated to the latest Running Windows 8.

  • SD-PP integration:  BOM alternative

    hello, friends.  i wish to ask you about transfer of requirements from SD to PP. when processing the sales order, the user can manually select the BOM alternative via a dialog box.  in standard, BOM with usage 3 (universal) and 5 (SD) are supported.

  • Icons in the tile List

    hello all , I am trying to display images in the Tilelist component whose path is given in the xml. The xml is located on the harddrive which is loaded in my mxml application as follows : import flash.events.*; import flash.net.URLLoader; import flas