T500 2082 BSG shutdown takes 15 minutes

Hi,
since two week i am a owner of a T500, he works great with Windows 7 32bit OEM version.
But i have a big problem, when the System runs and i work it takes more than 15 minutes to shutdown!!!
Thats definitely too long!!
Does someon have the same problem or know a solution for the problem? Thats would be great!!
If i just boot and than directly shutdown it shutdown in a few seconds.
Regard,
Thomas

No, still the same.
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T400-takes-long-to-shutdown/td-p/160875
maybe that help you.....
...let me know if you found a solution!

Similar Messages

  • T430s Takes Several Minutes to Shut Down

    Hey all,
    I've got a T430s running Windows 8.1. The machine runs great and boots very fast (probably helps that I bought an SSD); however, when I shut down, it takes several minutes (5+ minutes) to fully power-down. The screen goes black, but USB devices continue to have power and the fan still spins until finally it powers down. The same issue happens when I close the lid and put the machine to sleep.
    Before anyone blames Windows 8.1: This didn't happen right after I upgraded to 8.1. It seemed to start several days after the 8 --> 8.1 upgrade, and I'm not sure what variable changed to cause this.
    Any ideas? Thanks!

    Nothing in either the System or Application logs that would indicate that there were any problems shutting down. I can see where User32 indicates that the "power off" shutdown has been initiated, then about 5 more log entries in System after that, all of which appear to be normal (i.e. related to services shutting down). The time on these records are all within a few seconds of each-other. I don't see any outliers that are a few minutes out (i.e. things logged several minutes after the shutdown).
    One thing I did just notice is that I see the following Critical notice from Kernel-Power after booting up from shutting down:
    The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
    So it's not even going down cleanly. But I still have no idea what the offending driver/service/app is.

  • It takes 5 minutes to startup and i have "invalid volume directory count"

    I have tried 'restore disk' with install disk, does not work.
    Now it takes 5 minutes to start leopard.....
    Please help....
    This is when i startup:
    12-04-09 21:05:59 com.apple.launchd[107] (0x109840.Locum[197]) Exited: Terminated
    12-04-09 21:06:04 com.apple.loginwindow[24] Shutdown NOW!
    12-04-09 21:06:04 com.apple.loginwindow[24] System shutdown time has arrived
    12-04-09 21:06:05 com.apple.SystemStarter[17] Stopping HP Trap Monitor
    12-04-09 21:06:05 com.apple.SystemStarter[17] Stopping HP IO Monitor
    12-04-09 21:11:16 com.apple.launchctl.System[2] Missing thread record (id = 7726336)
    12-04-09 21:11:16 com.apple.launchctl.System[2] Invalid volume directory count
    12-04-09 21:11:16 com.apple.launchctl.System[2] (It should be 62222 instead of 62224)
    12-04-09 21:11:16 com.apple.launchctl.System[2] Invalid volume file count
    12-04-09 21:11:16 com.apple.launchctl.System[2] (It should be 269114 instead of 269128)
    12-04-09 21:11:16 com.apple.launchctl.System[2] Missing thread record (id = 7726336)
    12-04-09 21:11:16 com.apple.launchctl.System[2] Invalid volume directory count
    12-04-09 21:11:16 com.apple.launchctl.System[2] (It should be 62222 instead of 62224)
    12-04-09 21:11:16 com.apple.launchctl.System[2] Invalid volume file count
    12-04-09 21:11:16 com.apple.launchctl.System[2] (It should be 269114 instead of 269128)
    12-04-09 21:11:16 com.apple.launchctl.System[2] Missing thread record (id = 7726336)
    12-04-09 21:11:16 com.apple.launchctl.System[2] Invalid volume directory count
    12-04-09 21:11:16 com.apple.launchctl.System[2] (It should be 62222 instead of 62224)
    12-04-09 21:11:16 com.apple.launchctl.System[2] Invalid volume file count
    12-04-09 21:11:16 com.apple.launchctl.System[2] (It should be 269114 instead of 269128)
    12-04-09 21:11:16 com.apple.launchctl.System[2] Missing thread record (id = 7726336)
    12-04-09 21:11:16 com.apple.launchctl.System[2] Invalid volume directory count
    12-04-09 21:11:16 com.apple.launchctl.System[2] (It should be 62222 instead of 62224)
    12-04-09 21:11:16 com.apple.launchctl.System[2] Invalid volume file count
    12-04-09 21:11:16 com.apple.launchctl.System[2] (It should be 269114 instead of 269128)
    12-04-09 21:11:18 com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
    12-04-09 21:11:18 com.apple.launchd[1] (com.apple.blued) Unknown key for boolean: EnableTransactions
    12-04-09 21:11:18 com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
    12-04-09 21:11:18 com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
    12-04-09 21:11:40 org.ntp.ntpd[14] Error : nodename nor servname provided, or not known
    12-04-09 21:11:43 com.apple.SystemStarter[17] Starting HP IO Monitor
    12-04-09 21:11:43 com.apple.SystemStarter[17] Starting HP Trap Monitor
    12-04-09 21:12:12 com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[101]) Exited: Terminated
    12-04-09 21:12:12 com.apple.launchd[110] (com.apple.AirPortBaseStationAgent) Unknown key for boolean: EnableTransactions

    kennmoo wrote:
    I have tried 'restore disk' with install disk, does not work.
    what exactly doesn't work?
    boot from the leopard install DVD and repair the startup disk (repair disk, not permissions) using disk utility.
    Now it takes 5 minutes to start leopard.....
    Please help....
    This is when i startup:
    12-04-09 21:05:59 com.apple.launchd[107] (0x109840.Locum[197]) Exited: Terminated
    12-04-09 21:06:04 com.apple.loginwindow[24] Shutdown NOW!
    12-04-09 21:06:04 com.apple.loginwindow[24] System shutdown time has arrived
    12-04-09 21:06:05 com.apple.SystemStarter[17] Stopping HP Trap Monitor
    12-04-09 21:06:05 com.apple.SystemStarter[17] Stopping HP IO Monitor
    12-04-09 21:11:16 com.apple.launchctl.System[2] Missing thread record (id = 7726336)
    12-04-09 21:11:16 com.apple.launchctl.System[2] Invalid volume directory count
    12-04-09 21:11:16 com.apple.launchctl.System[2] (It should be 62222 instead of 62224)
    12-04-09 21:11:16 com.apple.launchctl.System[2] Invalid volume file count
    12-04-09 21:11:16 com.apple.launchctl.System[2] (It should be 269114 instead of 269128)
    12-04-09 21:11:16 com.apple.launchctl.System[2] Missing thread record (id = 7726336)
    12-04-09 21:11:16 com.apple.launchctl.System[2] Invalid volume directory count
    12-04-09 21:11:16 com.apple.launchctl.System[2] (It should be 62222 instead of 62224)
    12-04-09 21:11:16 com.apple.launchctl.System[2] Invalid volume file count
    12-04-09 21:11:16 com.apple.launchctl.System[2] (It should be 269114 instead of 269128)
    12-04-09 21:11:16 com.apple.launchctl.System[2] Missing thread record (id = 7726336)
    12-04-09 21:11:16 com.apple.launchctl.System[2] Invalid volume directory count
    12-04-09 21:11:16 com.apple.launchctl.System[2] (It should be 62222 instead of 62224)
    12-04-09 21:11:16 com.apple.launchctl.System[2] Invalid volume file count
    12-04-09 21:11:16 com.apple.launchctl.System[2] (It should be 269114 instead of 269128)
    12-04-09 21:11:16 com.apple.launchctl.System[2] Missing thread record (id = 7726336)
    12-04-09 21:11:16 com.apple.launchctl.System[2] Invalid volume directory count
    12-04-09 21:11:16 com.apple.launchctl.System[2] (It should be 62222 instead of 62224)
    12-04-09 21:11:16 com.apple.launchctl.System[2] Invalid volume file count
    12-04-09 21:11:16 com.apple.launchctl.System[2] (It should be 269114 instead of 269128)
    12-04-09 21:11:18 com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
    12-04-09 21:11:18 com.apple.launchd[1] (com.apple.blued) Unknown key for boolean: EnableTransactions
    12-04-09 21:11:18 com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
    12-04-09 21:11:18 com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
    12-04-09 21:11:40 org.ntp.ntpd[14] Error : nodename nor servname provided, or not known
    12-04-09 21:11:43 com.apple.SystemStarter[17] Starting HP IO Monitor
    12-04-09 21:11:43 com.apple.SystemStarter[17] Starting HP Trap Monitor
    12-04-09 21:12:12 com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[101]) Exited: Terminated
    12-04-09 21:12:12 com.apple.launchd[110] (com.apple.AirPortBaseStationAgent) Unknown key for boolean: EnableTransactions

  • Install Maverick and now When I turn off my mac air, takes 2 minutes. Why? As I can solve?

    Install Maverick and now When I turn off my mac air, takes 2 minutes. Why? As I can solve?

    Hi Linda,
    Unplugging it from AC power will drain the PRAM Battery in short order, thereby losing setting, like Monitor resolution.
    You can test the Pram Battery by disconnecting from the Internet so Date/Time doesn't update before you see it, shutdown, unplug AC for a bit, startup & check Time.
    In Sys Pefs>Displays, can you set the resolution?

  • IPod locks up and takes several minutes to unlock

    I have a 20 GB ipod with photo capabilities that is about a year and half old. Often times it will lock up, even when the "hold" is switched into the unlocked position. It ususally takes several minutes to unlock and then when it does, it bounces back and forth between being unlocked and locked. This will happens without ever touching the hold switch. Has this happened to anyone else?
    eMac   Mac OS X (10.3.9)  

    I am also having this problem. When trying to reboot, I get an endless cycle of the BIOS screen, then "MACHINE ERROR", then back. Running the same dmesg command as snoxu results in a similar error message. I am forced to shutdown by holding the power button. Upon rebooting, I get an error message that all extensions have been turned off (using Gnome Shell). Then I have to logout and login.
    Shutting down and then restarting works fine.
    Additional info:
    System76 Gazelle Professional laptop
    syslinux, systemd, GDM, Gnome Shell

  • Reboot hangs and takes several minutes to reboot

    Hello fellow archers I have a Vaio laptop and my system started to hang and takes several minutes to reboot.
    I have no real clue as to why since poweroff works fine and reboot used to work fine.
    I did a system update. And more recently migrated to systemd, may not be related
    edit: I found a workaround. Adding the following to my grub kernel line
    reboot=pci
    But it does not reboot quite the same way, meaning the power led no longer goes off and back on.
    Still haven't quite figured out why I can no longer reboot normally without this workaround.
    Last edited by snoxu (2012-10-18 18:16:18)

    I am also having this problem. When trying to reboot, I get an endless cycle of the BIOS screen, then "MACHINE ERROR", then back. Running the same dmesg command as snoxu results in a similar error message. I am forced to shutdown by holding the power button. Upon rebooting, I get an error message that all extensions have been turned off (using Gnome Shell). Then I have to logout and login.
    Shutting down and then restarting works fine.
    Additional info:
    System76 Gazelle Professional laptop
    syslinux, systemd, GDM, Gnome Shell

  • MacBook Pro takes 7 minutes to restart. Is it ok?

    I have a MacBook Pro:
      Nombre del modelo: MacBook Pro
      Identificador del modelo: MacBookPro9,2
      Nombre del procesador: Intel Core i5
      Velocidad del procesador: 2.5 GHz
      Cantidad de procesadores: 1
      Cantidad total de núcleos: 2
      Caché de nivel 2 (por núcleo): 256 KB
      Caché de nivel 3: 3 MB
      Memoria: 8 GB
      Versión de la ROM de arranque: MBP91.00D3.B09
      Versión SMC (sistema): 2.2f44
      Número de serie (sistema): XXXXXXXXXXXXXXXXXX
      UUID de hardware: DB159CB2-7F94-58EE-88AC-D57D9BA77BD4
      Sensor de movimiento repentino:
      Estado: Activado
    When it becomes slow during the day, I restart it. Sometimes it takes very long just to shut down (the spinning bars keeps rotating in a black background), approximately two minutes. So, I rather simply turn it off (I click OK in the "do you really want to do it" warning), this method is faster.
    Either way, my MacBook takes long to restart. It begins with a grey background for a minute or less, then a slim bar appears under Apple logo and starts to fill. This process takes three minutes, more or less. Then, when the bar is filled completely, the login screen with my photo appears. I login and immediately the pesky warning "Do you want to reopen application" appears; I click "Cancel". The desktop background picture appears, but just that, no menu bar, no dock, no icons. MacBook stays in this state for two and a half minutes. Then dock appears, no menu bar yet. I try to start an application with the Launcher icon in the dock but the screen gets blurred with the legend "Loading applications..." and MacBook stays in that state for another minute or more. I scape this blurred screen, I try to click something else but nothing is clickable, until menu bar appears. Then starts loading, clock mini icon, battery, TimeMachine, BlueTooth, iTranslate, DPS and other icons painfully slow. When everything seems to be on place, I click any item in the menu bar and the computer doesn't responde until the third click. Then everything starts working normal... until mid-afternoon, when the computer has become so slow that I have to restart it again.
    As you can see, it is really frustrating, painful, unproductive.
    Is this normal?
    What can I do?

    When you have the problem, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Why is does my apple run SLOW.you go to open a program and the circle thing just spins for a delayed period of time.  You change from typing in a word doc and go to say email or internet and it takes several minutes to allow you open anything up.  Like it

    Why is does my apple run SLOW.you go to open a program and the circle thing just spins for a delayed period of time.  You change from typing in a word doc and go to say email or internet and it takes several minutes to allow you open anything up.  Like it is frozen.  I have tried rebooting the computer and it works for a few minutes then gets stuck.

    Which model iMac do you have?
    How large is your HD and how much space do you have left?
    Check out the following & do the necessary: 
    User Tip:  Why is my computer slow?
    What to do when your computer is too slow
    Speeding up your Mac
    OS X (10.6.6)
    Use Software Update or the OS 10.6.8 combo update to update your OS.  Also, update everything SU has to offer for your computer.  When done, repair permissions and restart your computer.

  • Lenovo U410 takes 10 minutes to turn on - Please help

    Background:
    Got the laptop - 500GB HDD and 24GB mSATA SSD with iRST/ExpressCache. iRST was by default enabled in BIOS.
    Upgraded to 8.1 a few days after its release. Everything ran fine for a while.
    And one day after opening up the laptop and waking it from sleep I got a message saying "It appears Intel Rapid Start Technology is not enabled on your system." Since then the laptop takes 10 minutes to start where as before when I got the new machine it took 20 seconds.
    I did a system recovery using OneKey but that apparently only restores the C:\ drive so the mSATA (D is still having issues that are causing the long boot time.
    I tried a few things like deleting the mSATA volume/recreating and that did not help. iRST since the error message in the BIOS is showing as INVALID. I can't use diskpart to clean because the mSATA does not show when doing a list disk. I've changed AHCI to RAID and I can't get Windows to launch or go into the troubleshooting command prompt because Windows has an error when trying to start up and it will just boot loop.
    At the moment if I power my machine on from a powered down state it will start on a black screen that will sit there for 5-8 minutes and then the Lenovo screen with the loading circle will take another 2-3 and finally when Windows launches the system will be slow for another 2-3 minutes before I can even open the Task Manager. If I try to restart when Windows is loadaed it will just stay at a black screen until I hard-shut down using the Power button.
    I really don't know what I can do without voiding warranty (I thought about taking the mSATA SSD out but don't want to void the warranty). I really don't know what could have caused this (maybe upgrading to Win8.1?) but it's been happening since I woke the computer up from sleep once. I've heard that Lenovo Energy Management might be a cause of the iRST issue too?
    I'd also like to note that I tried uninstalling iRST and the uninstall was OK. Upon trying to reinstall it iRST is saying that my system does not meet the requirements which obviously is incorrect.
    Can someone or support please provide some help? Is there a way I can image my system (both HDD and SSD) to factory? 
    Thank you.

    I've also tried reinstalling ExpressCache but to no avail - it says during the install a suitable drive was not found.
    Doing a eccmd.exe -info says a SSD is not mounted.

  • FTP problem: connection going idle or missing; takes a minute to refresh

    Hi, i hope i explain myself, please forgive me my lack of tech-language and if i'm redundant:
    In my office we got a G5 dual that we turn into a server (Mac OS Server 10.5.7) for a couple of websites (for external use). I need this guys to have FTP access for some file sharing. Server is up, websites and databases are running fine, remote administration in local and external network is flawless, everything seems fine, except for the FTP: When i connect with cyberduck or any other FTP app, the authentication is done quickly but then, the connection goes idle (like it didn't exists) so the folder listing takes about a minute. Then, as soon as you get the listing, if you try to put something (i.e, a big file of 50mb, using the local network), the app makes a quick login but then it goes idle again (same, about a minute) and when the connections appears, the transfer goes really fast, after the transfers ends connection goes idle again a minute before managing the folder listing. I know that the connection "goes idle" or "disappears" because i started using little snitch to take a look at it. It appears like if the ftp app wasn´t even trying to connect, then suddenly, it´s there and connects/transfers. Every operation takes this minute to get going. If i try it with a browser, well, it times out. This is happening in both, local and external connection. But every other service is working cool.
    Can you give me any ideas about this matter?
    Message was edited by: rdlfo

    Ok, rather than going for the most problematic protocols known to modern networking, try with something simple.
    Don't test with ftp, test with sftp.
    I would initially suspect you're running into issues with firewalls here; beyond transmitting your credentials in cleartext, the design of ftp is inherently extremely allergic to firewalls, and particularly to transfers over connections that involve both local and remote firewalls.
    ftp is funky here in that it needs two connections between the client and the server, and the second connection tends to get blocked. An ftp active-mode connection has a back-connect from the ftp server to an ephemeral port on the client; traversing firewalls from server to client. An ftp passive-mode connection has a forward connection; a second parallel connection from the client to a specified (usually) ephemeral port on the ftp server; traversing the firewalls.
    Ignoring explicit transfer-mode selection, various clients can (transparently) try to switch between active and passive, too.
    My preferred approach is to avoid ftp. At all. Use sftp. sftp is far easier to punch through firewalls. And sftp doesn't transmit your username and password in cleartext, for that matter.
    The other part of this effort is around ensuring proper file protections and ownership in the web server directories. The web-facing file ownership should be user:www (often root:www) and the www user (the web server) should be able to read its web files, but (in general) should not be able to write to the web files or directories. This is defensive.

  • My macbook pro (lion 10.7.2) takes several minutes to connect to the internet after waking from sleep.  Is there any way to make this instant?

    Hi
    My Macbook Pro 15 inch takes several minutes to be able to connect to the internet after waking from sleep.  Does anyone else have this problem and is there a fix?
    Alan

    coxorangepippin wrote:
    The message that comes up when I click on "TomTom Home Install" is "You cannot open Home Install because Power PC applications are no longer supported." Does this mean that the TomTom, which is absolutely vital to my life - well, not literally but you know what I mean - can no longer be used with my MacBook Pro?
    What that means is that is can't be used with Lion 10.7.  PowerPC was the chip Apple used up until 2006 when they switched to Intel.  At that point, they created the Rosetta emulator to allow for PPC support for 5 years.  They finally dropped the support with the release of Lion.  It will only work with OS X 10.6 or earlier.  The other option is to purchase a new GPS, which can be had for $100 for a decent one.

  • How can I resolve an issue where webpages take several minutes to download? Other computers working on the same home network take not time at all.

    Firefox would not load webpage despite there being an active internet connection to the computer. I know this because firefox loaded on another home computer without any issues. I reset the ip address on the computer in question through cmd.exe and this helped the issue to an extent however it take several minutes to load webpages. I can also advise tha Internet Explorer suffered exactly the same issue and it gave me an error message early when unable to load webpages, that a remote firewall may be blocking the connection. It suggested to configure the firewall to allow connections thru TCP port 80.

    Hello ,
    Can you please post your ADSL stats by following this direct link; http://192.168.1.254/index.cgi?active_page=9116 << it only works if you have a Home Hub 2.0+ and remember to type your password in.
    Also we need a speedtest Use this link http://bt.custhelp.com/app/answers/detail/a_id/9354/c/346,4740,5520 as it will also help you diagnose and give you a list of solutions afterwards, it does incorporate the http://www.speedtester.bt.com one though as well.
    It sounds to me that you have a low profile, with your stats we can see if you've been having disconnections which makes the exchange raise your Noise Margin to try and increase your stabibility, but at a cost of speed, it may have been that your sync speed has recovereed, but not your IP Profile.
    Here are some helpful (I actually did find them helpful!) tips from BT: http://bt.custhelp.com/app/answers/detail/a_id/35079 up to you whether you want to read those tips, because I did actually find them helpful.  
    Can you comfirm that you have no noise on the line.  Really a test by dialling 17070 and pressing option 2 for the quiet line test should be completed in the Master Socket with no other devices connected to the line.  ANd also do you have a master socket with a split faceplate that you can unscrew the bottom half, if so behind there is a hidden 'test socket', it disconnects all your internal wiring so just to make sure its not a fault inside your premises.
    Regards Edd
    Check your Line
    BT Speedtester

  • Downloading an app on to my iPad mini takes 15 minutes or more. Is there a way to speed up the process?

    Downloading an app on to my iPad mini takes 15 minutes or more just for one app is there a way to speed up the process?

    Maybe your internet is very slow.
    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • I have poor/no service on my iphone 6  in places that I do have service on my old iphone 5.  Takes 10 minutes to send text and webpages will not load but load within seconds on the iphone 5 and forget making a phone call.  How do i resolve this issue??

    I have poor/no service on my iphone 6  in places that I do have service on my old iphone 5.  Takes 10 minutes to send text and webpages will not load but load within seconds on the iphone 5 and forget making a phone call.  How do i resolve this issue??

    Hey kristiac,
    Thanks for the question. If I understand correctly, you have no service on the iPhone. I would recommend that you read this article, it may be able to help the issue.
    If you can't connect to a cellular network or cellular data - Apple Support
    Thanks for using Apple Support Communities.
    Have a good one,
    Mario

  • In Windows Vista 7, SP2, Firefox takes several minutes to launch, is non-responsive, hangs sometimes launches additional windows without my clicking. I get error code 10003.

    I'm using Firefox 6.0.2 in Wndows Vista 7, SP2. I'm using Norman Security Suite anti-virus software. Firefox behaves erratically. Sometimes it takes several minutes to launch. If I launch an new window it sometimes hangs. It launches two extra windows without my having clicked to launch. Always two. I get an error code 10003 but when I search for this I get no information about it.
    Windows Task Manager shows plugin-container for Firefox running in addition to firefox.exe.

    Troubleshooting extensions and themes
    * https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
    Restore the default home page
    * https://support.mozilla.com/en-US/kb/How%20to%20set%20the%20home%20page#w_restore-the-default-home-page
    Clear Cookies & Cache
    * https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
    Clear the Network Cache
    * https://support.mozilla.com/en-US/kb/How%20to%20clear%20the%20cache#w_clear-the-cache
    Check and tell if its working.

Maybe you are looking for

  • Which file gets updated in WebLogic domain when a user is created

    Hi All, I have a query regarding In a weblogic domain when we create a user or group in security realm--> myrealm in Dfault Authenticator, then which file or folder under Domain directory structure gets updated? Thanks in Advance!!

  • Material Master Replication R/3 to SRM

    Hello SRM Experts, I am in a process of replicating MM from R/3 to SRM server. This is not a new one,already some materials are loaded into SRM. Ths issue what I am trying to understand is I have many materials,material Types and  material groups add

  • Behind ISA Server 2004 Error in applet

    Hi there, If i enter a particular website i am getting the following error: Error: 'idEditbox' is not defined If i enter the website when i am not behind the ISA Server 2004 i'm not getting any errors. Does anyone knows how this problem can be solved

  • Urgent : - Unusal Express Problem

    Hello All, I am getting this unusual express problem when ever I try to force complete generation of either an application model or a business model in Forte Express!!! The error is as follows!!!! SYSTEM ERROR: Cannot find project svc.tpl in workspac

  • Web_util demo does not work

    After trying to install and configure web_util I tried to configure and run web_util demo wu_test_105.fmb. I think that I have followed all of the instructions correctly but I get the following in my browser: <html> <head> ORACLE FORMS.</head> <body