T500 and ATI HD 3650 Driver Problem
I have a brand-new T500. Due to shipping limitations, this was the only model available and it shipped with Windows XP. My company has standardized on Vista Business so I purchased the recovery DVD's with it and loaded Vista as soon as I got it. After the final boot upon install I get an error "ATI Graphics Adapter Driver failed to load." I have been messing with it for about 2 hours now. I've tried uninstalling the driver completely and alternatively installing a) The Lenovo version from the website b) the Microsoft version from Windows Update and c) the ATI version from their website (won't even load).
Am I missing something?
Hi, seems you are welcome to the "T400/T500-left-anlone-without-proper-driver-support-in-vista" club.
See: http://forums.lenovo.com/lnv/board/message?board.id=T_Series_Thinkpads&thread.id=15703
Message Edited by dasdy78 on 09-11-2008 08:50 AM
Similar Messages
-
Terredo Tunneling adapter driver and Ralink PCI Adapter driver problem
Have HP A-I-O, running Windows 8 and getting errors ref. Terredo Tunneling Adapter driver and Ralink PCI Adapter driver problem. Occassionally lose internet or wireless mouse and kebouad. Troubleshooting reloaded drivers for both but did NOT resolve the problem.
Any ideas? Wouold Refresh work? If so, should I just load Windows 8.1?Sysherman, welcome to the forum.
When requesting help you should always include the make/model (i.e. p6-xxxx) of the computer and/or monitor. This information is necessary for us to review the specifications of them.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee. -
Is there a driver for Win 8.1 which allows to use the switchable graphics function?
After installing Win 8.1 I just can use the onboard graphic card. The only driver I found is made for Win 7 and doesn't work. A driver for ATI Radeon 3650 is installed but the device manager detects an error.
Thanks a lot for any helpHi Noah,
Welcome to Lenovo Community Forums!
I’m sorry to hear that you had difficulties in finding ATI Radeon drivers for your Lenovo ThinkPad after upgrading to Windows 8.1.
Check in the BIOS under Config > Display if there is an option for switchable graphics.
If you cannot find related drivers in Lenovo Support page, try running the AMD Driver Autodetect application which will auto detect the drivers and update it to the latest version that is compatible with your current operating system.
Hope this helps!
Best regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
HP G62 Ati HD 5470 driver problem (Blue-Screen)
Hello, I have installed a new Win7 64-bit, and I have downloaded every driver and installed successfully except ATI HD 5470 driver.
I have switchable graphics one is intel HD graphics and the other is ATI HD 5470.
When I attemt installing ati hd5470 driver my computer is going black then blue screen and booting itself, to solve this problem, Im booting in safe-mode then uninstalling ATI driver.
Product: XR486EA#AB8
Model: G62-b14ST
I need help! Thank you.Hello, Garrylily
I see that your trying to get the graphics installed after installing Win7 onto the notebook. I will try to assist you with this.
1) are you using the drivers from here: HP G62-b14ST Notebook PC Drivers.
2) if you are, installed the Intel driver first, then the amd driver.
3) if it's still blue screening, try installing the drivers from safe mode
4) if it fails from safe mode, the issue could be with the installed OS, try a recovery. (make sure to be using the recovery media for the notebook, so that your installing the OS that was on the notebook)
5) try drivers again (intel then amd)
6) contact phone support:
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Thank you for posting on the HP Forums.
I worked on behalf of HP. -
Nokia Suite and Nokia 701 Cable Driver Problems
Hi, I just bought a Nokia 701, and so far I love it, the only real problem I have is that I can't connect it with Nokia Suite through the provided cable, because the driver never get installed properly, everything OBEX fails to install.
So the only real way I can fully connect my Nokia 701 with Nokia Suite is via Bluetooth, but the speeds are dramatically slower. So I'd like to know if there are others having this problem or if I'm the only one. And in case this problem is already known, will there be a solution for it soon?
I also have a Nokia 5800 ExpressMusic and it has the same problem for ages. And it has never been solved, which I think it's pretty bad in a company the size of Nokia.
Just to clarify I'm using Windows 7 at 64 bits, and the latest version of Nokia Suite (3.3), and I'm trying to connect a Nokia 701 and a Nokia 5800, and both get driver incompatibilities that can't be resolved by the automatic Windows 7 search, and can't be resolved by searching for it manually with Windows Update, Windows Compatibility Site says that Nokia 5800 ExpressMusic should be 100% compatible, but, maybe because of the fact that Nokia 701 is relatively new, there is no information on the Windows Compatibility Site, about the device.
Please help me with this problem, it's very important for me to be able to connect both my cellphones via cable to the Nokia Suite application.
A preemptive thank you for all your help.Hey Sevennikke7, Welcome to the Nokia Forums.
To fix the problem, try the following solutions:
disconnect the USB cable and connect it again.
If you use a USB hub, try connecting the phone directly to the computer.
If you use a USB hub with an external power source, make sure that it has been switched on.
Check the USB cable for problems and replace if necessary.
If your phone asks you for the connection mode that you want to use, make sure that you select Nokia Suite(or PC Suite) on your phone.
Disconnect the cable, restart the computer, and try again.
Keep in mind that if you remove USB devices without using the Safely Remove Hardware tool in the Windows taskbar, connection problems may appear.
Go to Add/Remove Programs in Control Panel (called Programs and Features in Microsoft Windows 7).
Select Nokia Suite in the list of applications and click Change/Remove.
In the dialog that appears, choose Repair.Nokia Suite then check that all the needed files are intact and repairs any errors that were found.
Control Panel > Programs > Programs & features > Nokia Connectivity cable driver, right click and Change/Repair
Try go Control Panel > View Devices > Remove your device profiles and reinstall them.
As both devices cannot connect to your computer I believe it is a problem with drivers inside your PC.
I hope this helps and you manage to resolve your issue. Please get back to me if your problem persists.
Sheldrick
Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you! -
Old MacBook Pro slow and hangs frequently, hard drive problems?
Hi,
I have an old Macbook Pro (one of the originals, from about 4 1/2 years ago). Recently I've been noticing that it runs really slow, especially when its been running for a while and there are multiple programs open. It will take a long time to switch between windows, opening a tab in Safari will usually cause a spinning beach ball for 10-15 seconds and Safari crashes frequently. Other programs have similar problems, but don't normally crash. It's running Snow Leopard and has 1GB of RAM. Obviously I expect it to be slower with lots of stuff open, but my usage patterns haven't changed and its performance certainly has. The harddrive always seems to be being accessed when I have these problems.
The hard drive S.M.A.R.T. status is "verified," and I ran the Apple Hardware Test and it came out fine. But I'm still really worried that something could be going wrong, especially with the hard drive and since I am going away in a few weeks to work on a project and will be away from my backup drive I really want to make sure any problem is taken care of beforehand.
Does anyone have any ideas as to what could be the the problem or about anything I should try?
Much Thanks.With lots of concurrent processes and insufficient memory you will experience slow performance and beachballing. This is because the OS is forced to use the hard drive to replace the non-existent physical RAM. See the following:
About OS X Memory Management and Usage
Reading system memory usage in Activity Monitor
Memory Management in Mac OS X
Performance Guidelines- Memory Management in Mac OS X
A detailed look at memory usage in OS X
Understanding top output in the Terminal
The amount of available RAM for applications is the sum of Free RAM and Inactive RAM. This will change as applications are opened and closed or change from active to inactive status. The Swap figure represents an estimate of the total amount of swap space required for VM if used, but does not necessarily indicate the actual size of the existing swap file. If you are really in need of more RAM that would be indicated by how frequently the system uses VM. If you open the Terminal and run the top command at the prompt you will find information reported on Pageins () and Pageouts (). Pageouts () is the important figure. If the value in the parentheses is 0 (zero) then OS X is not making instantaneous use of VM which means you have adequate physical RAM for the system with the applications you have loaded. If the figure in parentheses is running positive and your hard drive is constantly being used (thrashing) then you need more physical RAM.
Also, a small hard drive with too little free space and a system lacking in any regular maintenance can also lead to slow performance. See the following:
Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.5.1 or higher are Intel Mac compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. Versions 1.5.1 or later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts had been significantly reduced in Tiger and Leopard. These utilities have limited or no functionality with Snow Leopard and should not be installed.
OS X automatically defrags files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc. Other utilities are also available such as Onyx, Leopard Cache Cleaner, CockTail, and Xupport, for example.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Backuplist
Carbon Copy Cloner
Data Backup
Deja Vu
iBackup
JaBack
Silver Keeper
MimMac
Retrospect
Super Flexible File Synchronizer
ynchronizer
SuperDuper!
Synchronize Pro! X
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
This should give you a few things to start sorting things out and getting better performance from your computer within its limitations.
If you have a Core Duo model then 2 GBs is the maximum RAM you can install. If you have a Core 2 Duo model then you can install up to 4 GBs but they system will only make use of 3 GBs. As for the hard drive it can be replaced. Notebook drives in the 250 to 500 GB - 7200 RPM range are relatively inexpensive. Visit OWC for pricing on drives and RAM. Visit Data Mem for pricing on RAM. -
Obscure Nano and Mini XP USB Driver Problem Finally Solved
I had a rather obscure USB driver registry problem that few others would probably have, but this might be helpful.
I was unable to get Windows XP SP2 Media Center Edition to properly recognize either my iPod Mini or Nano 3rd generation. The iPods would be seen by XP in Device Manager (would show Apple iPod USB Driver) when connected, but would immediately disconnect. The Apple iPod USB Driver properties would then show “This device cannot start (Code 10).”
I first tried all the Apple-recommended fixes: the five Rs; reinstalling the Apple iPod USB driver; disconnecting all other USB devices; switching USB plug-in points; putting the iPod into Drive Mode; and all the other things shown in the troubleshooting guide “iPod shows up in Windows but not in iTunes,” http://docs.info.apple.com/article.html?artnum=93716
None of the above worked. And on occasion after uninstalling and reinstalling the iPod USB driver, I would get a blue screen with the error message “driverirql_not_less_orequal,” sometimes followed by stop codes and something called “USBPORT.SYS.”
Apple phone support was unable to help, claiming that XP Media Center Edition was not supported, though the problem appeared to have no relation to MCE versus Home or Pro.
Then I finally stumbled onto the solution. I previously had installed a USB drive encryption program (NTINinja) on my computer. Although I had uninstalled the program months earlier, it had left a registry entry which was interfering with the iPods. When I deleted the registry entry, the problem was solved.
Those of you having similar recognition problems as described above might check Control Panel, System, Hardware, Device Manager, Universal Serial Bus Controllers, USB Root Hub, Properties, Details, then select Class Lower Filters in the drop-down box. If there is an entry, that might be the problem.
To get rid of the entry, first write down what it is. Then go to Start, Run, Regedit. Backup the registry (File, Export). Then go to Edit, Find, and type in the suspect entry. It should find the registry key containing the entry in HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Class\.
Right click on the LowerFilters key and select Modify. Then delete the suspect entry. Close the registry editor. You might have to reboot – can’t remember.
I can’t guarantee the above is completely accurate, but it may help someone.OK now! Dag, I was going crazy. I had two brand new Raptors and was trying to hook them up in a RAID 0 config. I am no dummy. It would hang at detecting arrays. I could not figure it out for the life of me. I will not talk about all of the combos that I tried. My buddy told me to try datalifeguard from WD. I did. Well, one HD showed no serial number in the extended test. An error message popped up. Said the drive was not working. So, Newegg sends me a dead drive and wastes days and days out of my life. I hooked up the one good drive just now. What do I see? For the first time in my life, I am seeing the raid bios! This almost cost me a divorce. Seriously though, the wife would come in and rub my shoulders like a fighter after a few hours of getting my azz whipped by this new rig. I am now going to make the floppy with the newer drivers like was done here. Just incase. I am in Raid bios now in the other room. Time to go set up XP on one drive for now. I refuse to wait for the RMA'ed second Raptor.
-
ATI Rage Mobility Driver problem
Hello. I managed to succesfully install Arch Linux on a old Acer TravelMate 732TXV. To put things in perspective, that's from the Win98 era. I am having some difficulty getting acceleration enabled. So far, I have managed to get a working graphical display using the xf86-video-vesa 2.3.2-1 package. I am trying to figure out if there is a better driver I should be using instead.
The output of 'lspci | grep VGA' is "01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Rage Mobility P/M AGP 2x (rev 64)".
I have tried xf86-video-ati and xf86-video-r128(only one driver package installed at any given time) but neither one worked for me. Only vesa. I read some other threads from years ago where people were asking about the same thing and some of the threads were non conclusive and others posted results that I didn't fully understsand such as this website.
https://bbs.archlinux.org/viewtopic.php?id=29918
That thread isn't exactly recent though, so I don't know how relevant it even is. What do I have to do to get acceleration working?
One last thing that might be relevant is that I have no way of installing Arch Linux directly on the laptop because it has no wifi capabilities and I don't have physical access to the router or modem. I have been using my other laptop to install Arch Linux to a flash drive. Then I am booting from the flash drive on the target laptop (which required a live-cd boot manager) to test things (I plan on copying the flash drive over to the hdd after I get it set up right). I'm not sure if that could effect this issue or not.
I don't mind if I have to downgrade some packages if that's what I have to do. This is basically just going to be a gimp machine.
Last edited by kalantir (2012-10-13 03:20:28)WonderWoofy wrote:Why not use your other laptop to connect to wi-fi and then connect the old laptop to the newer one via ethernet cable and share the connection? Wouldn't this be much more optimal?
Can I do this with just an ethernet cord and 2 laptops? I'm also not really sure if my ethernet cord works. -
Macbook Air and Sony camcorder hard drive problems
My new Mac Book Air will not respond in I Movie to my new Sony camcorder with internal hard drive but will sometimes with the SD card.....can anyone give me a clue please.
I opted for the 11-inch mainly due to portability, but went with the 128GB model. Once I have all my critical apps installed (including Adobe Lightroom and CS4), I still have about 85GB free.
One of the reasons I got the MBA is for traveling and downloading photos from my camera while on the road. If the 128 isn't enough, I have a WD Passport drive that I can use for backup & freeing up space should the need arise. So far, I haven't had to connect the external drive, so I'm happy I opted for the 11-inch. The size is perfect for portability without compromising keyboard size or resolution. -
A205-S5000 won't boot. Says possible hard drive problem
Laptop won't boot and says possible hard drive problem. Need to recover
personal reports and data, so thinking of removing the drive and using an enclosure
so the data, if still good, can be extracted from the drive by another computer. Question
is, will I be able to create the restore cd's from the hard drive if the hard drive is not the
boot drive ie; attached to a 2nd computer via usb and enclosure.
If it's not possible, I can try to create cd's from a different model laptop (toshiba), same vista os but
what about the product key? I will try to reinstall the bad drive and try a reboot to recovery mode but
I doubt that is going to work or complete. Idea was to get a new drive and try to install recovery disks.Satellite A205-S5000
Recovery discs must be from an identical model. If you can't burn them from that computer, best to order them
Order Toshiba Recovery Media
The restored Windows is pre-activated.
-Jerry -
Win7 and ATI hd 3400 series driver problem
Hi guys
i have installed win7 on my T400. generally there is not driver problem. but in device manager window there is a '!' on ATI mobility Radeon hd 3400 Series. i have downloaded ATI Display Driver for Windows 7 32bit and 64bit from http://www-307.ibm.com/pc/support/site.wss/WIN7-BETA.html#m8xdiscrete but there is not any change.
1-is it a serious problem?
2-how can i solve this problem?
best regards
Solved!
Go to Solution.Since your system shows two display adapters, you do have switchable graphics. Deinstall the ATI driver and install the Switchable Graphics driver. This package contains drivers for both cards and allows them to cooperate.
Lenovo Premium Business Partner
X1 Carbon Touch | i7-3667U | 8Gb | 256Gb | HD 4000 | 14HD+ | WWAN | W8.1 Pro RTM x64 | -
Zen Kernel and new ati radeon oss driver
Hey together!
A few days ago I get new ati-driver from testing and since then, I can't start the xserver with the zen kernel and ums. I can use the normal kernel 2.6.33 normally.
Here is my Xorg log:
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH i686
Current Operating System: Linux linux-laptop 2.6.33-ZEN #1 ZEN SMP PREEMPT Fri Mar 5 13:29:19 CET 2010 i686
Kernel command line: root=/dev/disk/by-uuid/5394d0b7-4952-4f87-87bc-a4762f73b8c4 ro quiet
Build Date: 18 March 2010 07:32:34PM
Current version of pixman: 0.16.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 19 14:12:54 2010
(II) Loader magic: 0x81e4c60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7
(--) PCI:*(0:1:0:0) 1002:5653:144d:e003 ATI Technologies Inc Radeon Mobility X700 (PCIE) rev 0, Mem @ 0xd0000000/134217728, 0xc0100000/65536, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default ati Device 0"
Driver "ati"
EndSection
Section "Screen"
Identifier "Builtin Default ati Screen 0"
Device "Builtin Default ati Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default ati Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default ati Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default ati Device 0"
(==) No monitor specified for screen "Builtin Default ati Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AutoAddDevices.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 6.12.192
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 6.12.192
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
ATI FirePro M5750, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4290,
CYPRESS, ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5900 Series, ATI Radeon HD 5900 Series,
ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 5700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, CEDAR, CEDAR, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, CEDAR, ATI Radeon HD 5450,
CEDAR
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 01@00:00:0
(II) [KMS] drm report modesetting isn't supported.
(WW) Falling back to old probe method for vesa
(II) RADEON(0): TOTO SAYS 00000000c0100000
(II) RADEON(0): MMIO registers at 0x00000000c0100000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(II) RADEON(0): Creating default Display subsection in Screen section
"Builtin Default ati Screen 0" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Mobility Radeon X700 (M26) (PCIE)" (ChipID = 0x5653)
(--) RADEON(0): Linear framebuffer at 0x00000000d0000000
(II) RADEON(0): PCIE card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom:
SubsystemVendorID: 0x144d SubsystemID: 0x5653
IOBaseAddress: 0x3000
Filename:
BIOS Bootup Message:
M26-P Samsung M26 Firenze ATOMBIOS BR14537/rel9.10.1.0/CL199610
(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0x7ffb000
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0x7ffb000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 358000
(II) RADEON(0): Default Memory Clock: 345000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 500000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 200000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 27000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.32.0
(==) RADEON(0): Page Flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=131072K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): PLL parameters: rf=2700 rd=7 min=20000 max=50000; xclk=40000
(WW) RADEON(0): LVDS Info:
XRes: 1280, YRes: 800, DotClock: 68900
HBlank: 128, HOverPlus: 21, HSyncWidth: 32
VBlank: 16, VOverPlus: 4, VSyncWidth: 4
(II) RADEON(0): Skipping TV-Out
(II) RADEON(0): TMDS PLL from BIOS: 16500 b0112
(II) RADEON(0): Skipping Component Video
(II) RADEON(0): Output VGA-0 has no monitor section
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): I2C bus "LVDS" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Port0:
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_DAC1
DDC reg: 0x60
(II) RADEON(0): Port1:
XRANDR name: LVDS
Connector: LVDS
LCD1: INTERNAL_LVDS
DDC reg: 0x1a808
(II) RADEON(0): Port2:
XRANDR name: DVI-0
Connector: DVI-D
DFP1: INTERNAL_TMDS1
DDC reg: 0x64
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 0
Backtrace:
0: /usr/bin/X (xorg_backtrace+0x3b) [0x809f7db]
1: /usr/bin/X (0x8048000+0x54715) [0x809c715]
2: (vdso) (__kernel_rt_sigreturn+0x0) [0x7785e40c]
3: /usr/lib/xorg/modules/drivers/radeon_drv.so (0x77226000+0x83208) [0x772a9208]
4: /usr/lib/xorg/modules/drivers/radeon_drv.so (0x77226000+0x3790c) [0x7725d90c]
5: /usr/lib/xorg/modules/drivers/radeon_drv.so (0x77226000+0x3988b) [0x7725f88b]
6: /usr/bin/X (InitOutput+0x5c8) [0x80ab048]
7: /usr/bin/X (0x8048000+0x1a550) [0x8062550]
8: /lib/libc.so.6 (__libc_start_main+0xe6) [0x7747db86]
9: /usr/bin/X (0x8048000+0x1a2f1) [0x80622f1]
Segmentation fault at address 0x7734f808
Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting
Can anyone help me? Thanks!When I install an old xf86-video-ati package from 27.02.2010, everything works. So the problem seems to be the new ati-driver.
-
Frozen screen with xorg-server 1.16 and ati driver
Hi,
after upgrading xorg-server to 1.16 (yes, I've read the news), the screen is somehow frozen: I can move the mouse but when I e.g. want to open a gui/window, nothing happens. Only switching from tty1 to another tty and back to tty1 updates the screen.
I'm using driver. xf86-video-ati on a Mobility Radeon HD 3650.
.local/share/xorg/Xorg.0.log:
[ 57.275]
X.Org X Server 1.16.0
Release Date: 2014-07-16
[ 57.275] X Protocol Version 11, Revision 0
[ 57.275] Build Operating System: Linux 3.15.5-2-ARCH x86_64
[ 57.275] Current Operating System: Linux bra 3.16.1-1-ARCH #1 SMP PREEMPT Thu Aug 14 07:40:19 CEST 2014 x86_64
[ 57.275] Kernel command line: BOOT_IMAGE=../vmlinuz-linux cryptdevice=/dev/sda2:main root=/dev/mapper/main-root ro locale=de_DE.UTF-8 initrd=../initramfs-linux.img
[ 57.275] Build Date: 31 July 2014 11:53:19AM
[ 57.275]
[ 57.275] Current version of pixman: 0.32.6
[ 57.275] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 57.275] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 57.275] (==) Log file: "/home/hel/.local/share/xorg/Xorg.0.log", Time: Sat Aug 30 19:43:24 2014
[ 57.282] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 57.282] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 57.295] (==) No Layout section. Using the first Screen section.
[ 57.295] (==) No screen section available. Using defaults.
[ 57.295] (**) |-->Screen "Default Screen Section" (0)
[ 57.295] (**) | |-->Monitor "<default monitor>"
[ 57.297] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 57.297] (**) | |-->Device "My Graphics Card"
[ 57.297] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 57.297] (==) Automatically adding devices
[ 57.297] (==) Automatically enabling devices
[ 57.297] (==) Automatically adding GPU devices
[ 57.360] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 57.360] Entry deleted from font path.
[ 57.361] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 57.361] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 57.361] Entry deleted from font path.
[ 57.361] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 57.361] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 57.361] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 57.361] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 57.362] (II) Loader magic: 0x818d80
[ 57.362] (II) Module ABI versions:
[ 57.362] X.Org ANSI C Emulation: 0.4
[ 57.362] X.Org Video Driver: 18.0
[ 57.362] X.Org XInput driver : 21.0
[ 57.362] X.Org Server Extension : 8.0
[ 57.459] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 57.459] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 57.504] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 57.506] (--) PCI:*(0:1:0:0) 1002:9591:17aa:2117 rev 0, Mem @ 0xd0000000/268435456, 0xcfff0000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[ 57.506] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 57.506] (II) LoadModule: "glx"
[ 57.509] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 57.608] (II) Module glx: vendor="X.Org Foundation"
[ 57.608] compiled for 1.16.0, module version = 1.0.0
[ 57.608] ABI class: X.Org Server Extension, version 8.0
[ 57.608] (==) AIGLX enabled
[ 57.608] (==) Matched ati as autoconfigured driver 0
[ 57.608] (==) Matched ati as autoconfigured driver 1
[ 57.608] (==) Matched modesetting as autoconfigured driver 2
[ 57.608] (==) Matched fbdev as autoconfigured driver 3
[ 57.608] (==) Matched vesa as autoconfigured driver 4
[ 57.608] (==) Assigned the driver to the xf86ConfigLayout
[ 57.608] (II) LoadModule: "ati"
[ 57.608] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 57.612] (II) Module ati: vendor="X.Org Foundation"
[ 57.612] compiled for 1.16.0, module version = 7.4.0
[ 57.612] Module class: X.Org Video Driver
[ 57.612] ABI class: X.Org Video Driver, version 18.0
[ 57.612] (II) LoadModule: "radeon"
[ 57.612] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 57.626] (II) Module radeon: vendor="X.Org Foundation"
[ 57.626] compiled for 1.16.0, module version = 7.4.0
[ 57.626] Module class: X.Org Video Driver
[ 57.626] ABI class: X.Org Video Driver, version 18.0
[ 57.626] (II) LoadModule: "modesetting"
[ 57.627] (WW) Warning, couldn't open module modesetting
[ 57.627] (II) UnloadModule: "modesetting"
[ 57.627] (II) Unloading modesetting
[ 57.627] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 57.627] (II) LoadModule: "fbdev"
[ 57.627] (WW) Warning, couldn't open module fbdev
[ 57.627] (II) UnloadModule: "fbdev"
[ 57.627] (II) Unloading fbdev
[ 57.627] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 57.627] (II) LoadModule: "vesa"
[ 57.627] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 57.632] (II) Module vesa: vendor="X.Org Foundation"
[ 57.632] compiled for 1.16.0, module version = 2.3.2
[ 57.632] Module class: X.Org Video Driver
[ 57.632] ABI class: X.Org Video Driver, version 18.0
[ 57.632] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, HAINAN, HAINAN, HAINAN,
HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
BONAIRE, BONAIRE, BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
MULLINS, MULLINS, MULLINS, MULLINS, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
HAWAII, HAWAII, HAWAII, HAWAII, HAWAII
[ 57.636] (II) VESA: driver for VESA chipsets: vesa
[ 57.636] (++) using VT number 1
[ 57.637] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 57.637] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 57.642] (II) [KMS] Kernel modesetting enabled.
[ 57.642] (WW) Falling back to old probe method for vesa
[ 57.642] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 57.642] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 57.642] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 57.642] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 57.642] (==) RADEON(0): Default visual is TrueColor
[ 57.642] (**) RADEON(0): Option "EXAVSync" "on"
[ 57.642] (**) RADEON(0): Option "EXAPixmaps" "on"
[ 57.642] (==) RADEON(0): RGB weight 888
[ 57.642] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 57.642] (--) RADEON(0): Chipset: "ATI Mobility Radeon HD 3650" (ChipID = 0x9591)
[ 57.642] (II) Loading sub module "dri2"
[ 57.642] (II) LoadModule: "dri2"
[ 57.642] (II) Module "dri2" already built-in
[ 57.642] (II) Loading sub module "exa"
[ 57.642] (II) LoadModule: "exa"
[ 57.642] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 57.653] (II) Module exa: vendor="X.Org Foundation"
[ 57.653] compiled for 1.16.0, module version = 2.6.0
[ 57.653] ABI class: X.Org Video Driver, version 18.0
[ 57.653] (II) RADEON(0): KMS Color Tiling: enabled
[ 57.653] (II) RADEON(0): KMS Color Tiling 2D: enabled
[ 57.653] (II) RADEON(0): KMS Pageflipping: enabled
[ 57.653] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 57.683] (II) RADEON(0): Output DVI-0 has no monitor section
[ 57.683] (II) RADEON(0): Output LVDS has no monitor section
[ 57.696] (II) RADEON(0): Output DisplayPort-0 has no monitor section
[ 57.717] (II) RADEON(0): Output VGA-0 has no monitor section
[ 57.747] (II) RADEON(0): EDID for output DVI-0
[ 57.747] (II) RADEON(0): Manufacturer: SAM Model: 3f0 Serial#: 1413755442
[ 57.747] (II) RADEON(0): Year: 2008 Week: 4
[ 57.747] (II) RADEON(0): EDID Version: 1.3
[ 57.747] (II) RADEON(0): Digital Display Input
[ 57.747] (II) RADEON(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 57.747] (II) RADEON(0): Gamma: 2.20
[ 57.747] (II) RADEON(0): DPMS capabilities: Off
[ 57.747] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 57.747] (II) RADEON(0): First detailed timing is preferred mode
[ 57.747] (II) RADEON(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 57.747] (II) RADEON(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 57.747] (II) RADEON(0): Supported established timings:
[ 57.747] (II) RADEON(0): 720x400@70Hz
[ 57.747] (II) RADEON(0): 640x480@60Hz
[ 57.747] (II) RADEON(0): 640x480@67Hz
[ 57.747] (II) RADEON(0): 640x480@72Hz
[ 57.747] (II) RADEON(0): 640x480@75Hz
[ 57.747] (II) RADEON(0): 800x600@56Hz
[ 57.747] (II) RADEON(0): 800x600@60Hz
[ 57.747] (II) RADEON(0): 800x600@72Hz
[ 57.747] (II) RADEON(0): 800x600@75Hz
[ 57.747] (II) RADEON(0): 832x624@75Hz
[ 57.747] (II) RADEON(0): 1024x768@60Hz
[ 57.748] (II) RADEON(0): 1024x768@70Hz
[ 57.748] (II) RADEON(0): 1024x768@75Hz
[ 57.748] (II) RADEON(0): 1280x1024@75Hz
[ 57.748] (II) RADEON(0): 1152x864@75Hz
[ 57.748] (II) RADEON(0): Manufacturer's mask: 0
[ 57.748] (II) RADEON(0): Supported standard timings:
[ 57.748] (II) RADEON(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 57.748] (II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 57.748] (II) RADEON(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 57.748] (II) RADEON(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 57.748] (II) RADEON(0): Supported detailed timing:
[ 57.748] (II) RADEON(0): clock: 146.2 MHz Image Size: 433 x 271 mm
[ 57.748] (II) RADEON(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
[ 57.748] (II) RADEON(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 57.748] (II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 155 MHz
[ 57.748] (II) RADEON(0): Monitor name: SyncMaster
[ 57.748] (II) RADEON(0): Serial No: H1AK500000
[ 57.748] (II) RADEON(0): EDID (in hex):
[ 57.748] (II) RADEON(0): 00ffffffffffff004c2df00332324454
[ 57.748] (II) RADEON(0): 04120103802f1e782aee91a3544c9926
[ 57.748] (II) RADEON(0): 0f5054bfef80b30081808140714f0101
[ 57.748] (II) RADEON(0): 01010101010121399030621a274068b0
[ 57.748] (II) RADEON(0): 3600b10f1100001c000000fd00384b1e
[ 57.748] (II) RADEON(0): 510f000a202020202020000000fc0053
[ 57.748] (II) RADEON(0): 796e634d61737465720a2020000000ff
[ 57.748] (II) RADEON(0): 004831414b3530303030300a202000b4
[ 57.748] (II) RADEON(0): Printing probed modes for output DVI-0
[ 57.748] (II) RADEON(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz eP)
[ 57.748] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 57.748] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 57.748] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 57.748] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 57.748] (II) RADEON(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 57.748] (II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 57.748] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 57.748] (II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 57.748] (II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 57.748] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 57.748] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 57.748] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 57.748] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 57.748] (II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 57.748] (II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 57.748] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 57.748] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 57.748] (II) RADEON(0): EDID for output LVDS
[ 57.748] (II) RADEON(0): Manufacturer: IBM Model: 2887 Serial#: 0
[ 57.748] (II) RADEON(0): Year: 2005 Week: 0
[ 57.748] (II) RADEON(0): EDID Version: 1.3
[ 57.748] (II) RADEON(0): Digital Display Input
[ 57.748] (II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 57.748] (II) RADEON(0): Gamma: 2.20
[ 57.748] (II) RADEON(0): No DPMS capabilities specified
[ 57.748] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 57.748] (II) RADEON(0): First detailed timing is preferred mode
[ 57.748] (II) RADEON(0): redX: 0.596 redY: 0.347 greenX: 0.335 greenY: 0.543
[ 57.748] (II) RADEON(0): blueX: 0.158 blueY: 0.143 whiteX: 0.313 whiteY: 0.329
[ 57.748] (II) RADEON(0): Manufacturer's mask: 0
[ 57.748] (II) RADEON(0): Supported detailed timing:
[ 57.748] (II) RADEON(0): clock: 120.6 MHz Image Size: 331 x 207 mm
[ 57.748] (II) RADEON(0): h_active: 1680 h_sync: 1712 h_sync_end 1760 h_blank_end 1888 h_border: 0
[ 57.748] (II) RADEON(0): v_active: 1050 v_sync: 1051 v_sync_end 1054 v_blanking: 1065 v_border: 0
[ 57.748] (II) RADEON(0): Supported detailed timing:
[ 57.748] (II) RADEON(0): clock: 100.5 MHz Image Size: 331 x 207 mm
[ 57.748] (II) RADEON(0): h_active: 1680 h_sync: 1712 h_sync_end 1760 h_blank_end 1888 h_border: 0
[ 57.748] (II) RADEON(0): v_active: 1050 v_sync: 1051 v_sync_end 1054 v_blanking: 1065 v_border: 0
[ 57.748] (II) RADEON(0): Unknown vendor-specific block f
[ 57.748] (II) RADEON(0): LP154W02-TL06
[ 57.748] (II) RADEON(0): EDID (in hex):
[ 57.748] (II) RADEON(0): 00ffffffffffff00244d872800000000
[ 57.748] (II) RADEON(0): 000f0103802115780abca59858558b28
[ 57.748] (II) RADEON(0): 24505400000001010101010101010101
[ 57.748] (II) RADEON(0): 0101010101011c2f90d0601a0f402030
[ 57.748] (II) RADEON(0): 13004bcf10000019452790d0601a0f40
[ 57.748] (II) RADEON(0): 203013004bcf100000190000000f00b3
[ 57.748] (II) RADEON(0): 0a32b30a28140100320c0000000000fe
[ 57.748] (II) RADEON(0): 004c503135345730322d544c303600bf
[ 57.748] (II) RADEON(0): Printing probed modes for output LVDS
[ 57.748] (II) RADEON(0): Modeline "1680x1050"x60.0 120.60 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (63.9 kHz eP)
[ 57.748] (II) RADEON(0): Modeline "1680x1050"x50.0 100.53 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (53.2 kHz e)
[ 57.748] (II) RADEON(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
[ 57.748] (II) RADEON(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
[ 57.748] (II) RADEON(0): Modeline "1440x900"x59.9 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 57.748] (II) RADEON(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz)
[ 57.748] (II) RADEON(0): Modeline "1280x854"x59.9 89.25 1280 1352 1480 1680 854 857 867 887 -hsync +vsync (53.1 kHz)
[ 57.748] (II) RADEON(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 57.748] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
[ 57.748] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 57.748] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 57.748] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 57.748] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
[ 57.749] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
[ 57.749] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 57.760] (II) RADEON(0): EDID for output DisplayPort-0
[ 57.780] (II) RADEON(0): EDID for output VGA-0
[ 57.780] (II) RADEON(0): Output DVI-0 connected
[ 57.780] (II) RADEON(0): Output LVDS connected
[ 57.780] (II) RADEON(0): Output DisplayPort-0 disconnected
[ 57.780] (II) RADEON(0): Output VGA-0 disconnected
[ 57.780] (II) RADEON(0): Using exact sizes for initial modes
[ 57.780] (II) RADEON(0): Output DVI-0 using initial mode 1680x1050
[ 57.780] (II) RADEON(0): Output LVDS using initial mode 1680x1050
[ 57.780] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 57.780] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:f8ca000
[ 57.780] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 57.780] (==) RADEON(0): DPI set to (96, 96)
[ 57.780] (II) Loading sub module "fb"
[ 57.780] (II) LoadModule: "fb"
[ 57.780] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 57.815] (II) Module fb: vendor="X.Org Foundation"
[ 57.815] compiled for 1.16.0, module version = 1.0.0
[ 57.815] ABI class: X.Org ANSI C Emulation, version 0.4
[ 57.815] (II) Loading sub module "ramdac"
[ 57.815] (II) LoadModule: "ramdac"
[ 57.815] (II) Module "ramdac" already built-in
[ 57.815] (II) UnloadModule: "vesa"
[ 57.816] (II) Unloading vesa
[ 57.816] (--) Depth 24 pixmap format is 32 bpp
[ 57.817] (II) RADEON(0): [DRI2] Setup complete
[ 57.817] (II) RADEON(0): [DRI2] DRI driver: r600
[ 57.817] (II) RADEON(0): [DRI2] VDPAU driver: r600
[ 57.817] (II) RADEON(0): Front buffer size: 7128K
[ 57.817] (II) RADEON(0): VRAM usage limit set to 222840K
[ 57.829] (==) RADEON(0): Backing store enabled
[ 57.829] (II) RADEON(0): Direct rendering enabled
[ 57.829] (II) RADEON(0): EXA VSync enabled
[ 57.829] (II) EXA(0): Driver allocated offscreen pixmaps
[ 57.829] (II) EXA(0): Driver registered support for the following operations:
[ 57.829] (II) Solid
[ 57.829] (II) Copy
[ 57.829] (II) Composite (RENDER acceleration)
[ 57.829] (II) UploadToScreen
[ 57.829] (II) DownloadFromScreen
[ 57.829] (II) RADEON(0): Acceleration enabled
[ 57.829] (==) RADEON(0): DPMS enabled
[ 57.829] (==) RADEON(0): Silken mouse enabled
[ 57.830] (II) RADEON(0): Set up textured video
[ 57.830] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 57.830] (II) RADEON(0): [XvMC] Extension initialized.
[ 57.830] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 57.841] (WW) RADEON(0): Option "AccelDFS" is not used
[ 57.841] (--) RandR disabled
[ 58.103] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 58.103] (II) AIGLX: enabled GLX_ARB_create_context
[ 58.103] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 58.103] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 58.103] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 58.103] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 58.103] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 58.103] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 58.103] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 58.104] (II) AIGLX: Loaded and initialized r600
[ 58.104] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 58.940] (II) RADEON(0): Setting screen physical size to 444 x 277
[ 59.040] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 59.040] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 59.040] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 59.040] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 59.040] (II) LoadModule: "evdev"
[ 59.040] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 59.053] (II) Module evdev: vendor="X.Org Foundation"
[ 59.053] compiled for 1.16.0, module version = 2.9.0
[ 59.053] Module class: X.Org XInput Driver
[ 59.053] ABI class: X.Org XInput driver, version 21.0
[ 59.054] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 11 paused 0
[ 59.054] (II) Using input driver 'evdev' for 'Power Button'
[ 59.054] (**) Power Button: always reports core events
[ 59.054] (**) evdev: Power Button: Device: "/dev/input/event6"
[ 59.054] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 59.054] (--) evdev: Power Button: Found keys
[ 59.054] (II) evdev: Power Button: Configuring as keyboard
[ 59.054] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event6"
[ 59.054] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 59.054] (**) Option "xkb_rules" "evdev"
[ 59.054] (**) Option "xkb_model" "pc104"
[ 59.054] (**) Option "xkb_layout" "us"
[ 59.054] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 59.105] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 59.105] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 59.105] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 59.105] (**) Video Bus: Applying InputClass "Keyboard Defaults"
[ 59.107] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 12 paused 0
[ 59.107] (II) Using input driver 'evdev' for 'Video Bus'
[ 59.107] (**) Video Bus: always reports core events
[ 59.107] (**) evdev: Video Bus: Device: "/dev/input/event7"
[ 59.107] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 59.107] (--) evdev: Video Bus: Found keys
[ 59.107] (II) evdev: Video Bus: Configuring as keyboard
[ 59.107] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input8/event7"
[ 59.107] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 59.107] (**) Option "xkb_rules" "evdev"
[ 59.107] (**) Option "xkb_model" "pc104"
[ 59.107] (**) Option "xkb_layout" "us"
[ 59.107] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 59.107] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[ 59.108] (II) No input driver specified, ignoring this device.
[ 59.108] (II) This device may have been added with another device file.
[ 59.108] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[ 59.108] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 59.108] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 59.108] (**) Sleep Button: Applying InputClass "Keyboard Defaults"
[ 59.108] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 13 paused 0
[ 59.108] (II) Using input driver 'evdev' for 'Sleep Button'
[ 59.108] (**) Sleep Button: always reports core events
[ 59.108] (**) evdev: Sleep Button: Device: "/dev/input/event5"
[ 59.108] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 59.108] (--) evdev: Sleep Button: Found keys
[ 59.108] (II) evdev: Sleep Button: Configuring as keyboard
[ 59.108] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event5"
[ 59.108] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 59.108] (**) Option "xkb_rules" "evdev"
[ 59.108] (**) Option "xkb_model" "pc104"
[ 59.108] (**) Option "xkb_layout" "us"
[ 59.108] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 59.109] (II) config/udev: Adding input device Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint (/dev/input/event1)
[ 59.109] (**) Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Applying InputClass "evdev keyboard catchall"
[ 59.109] (**) Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Applying InputClass "evdev keyboard catchall"
[ 59.109] (**) Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Applying InputClass "Keyboard Defaults"
[ 59.109] (**) Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Applying InputClass "Trackpoint Wheel Emulation"
[ 59.110] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 14 paused 0
[ 59.110] (II) Using input driver 'evdev' for 'Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint'
[ 59.110] (**) Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: always reports core events
[ 59.110] (**) evdev: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Device: "/dev/input/event1"
[ 59.110] (--) evdev: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Vendor 0x17ef Product 0x6009
[ 59.110] (--) evdev: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Found keys
[ 59.110] (II) evdev: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Configuring as keyboard
[ 59.110] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb7/7-5/7-5.2/7-5.2:1.0/0003:17EF:6009.0001/input/input2/event1"
[ 59.110] (II) XINPUT: Adding extended input device "Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint" (type: KEYBOARD, id 9)
[ 59.110] (**) Option "xkb_rules" "evdev"
[ 59.110] (**) Option "xkb_model" "pc104"
[ 59.110] (**) Option "xkb_layout" "us"
[ 59.110] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 59.110] (II) config/udev: Adding input device Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint (/dev/input/event2)
[ 59.110] (**) Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Applying InputClass "evdev pointer catchall"
[ 59.110] (**) Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Applying InputClass "evdev keyboard catchall"
[ 59.110] (**) Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Applying InputClass "evdev pointer catchall"
[ 59.110] (**) Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Applying InputClass "evdev keyboard catchall"
[ 59.110] (**) Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Applying InputClass "Keyboard Defaults"
[ 59.110] (**) Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Applying InputClass "Trackpoint Wheel Emulation"
[ 59.111] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 15 paused 0
[ 59.111] (II) Using input driver 'evdev' for 'Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint'
[ 59.111] (**) Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: always reports core events
[ 59.111] (**) evdev: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Device: "/dev/input/event2"
[ 59.111] (--) evdev: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Vendor 0x17ef Product 0x6009
[ 59.111] (--) evdev: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Found 19 mouse buttons
[ 59.111] (--) evdev: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Found relative axes
[ 59.111] (--) evdev: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Found x and y relative axes
[ 59.111] (--) evdev: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Found keys
[ 59.111] (II) evdev: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Configuring as mouse
[ 59.111] (II) evdev: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Configuring as keyboard
[ 59.111] (**) Option "Emulate3Buttons" "false"
[ 59.111] (**) Option "EmulateWheel" "true"
[ 59.111] (**) Option "EmulateWheelButton" "2"
[ 59.111] (**) Option "YAxisMapping" "4 5"
[ 59.111] (**) evdev: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: YAxisMapping: buttons 4 and 5
[ 59.111] (**) Option "XAxisMapping" "6 7"
[ 59.111] (**) evdev: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: XAxisMapping: buttons 6 and 7
[ 59.111] (**) evdev: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 59.111] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb7/7-5/7-5.2/7-5.2:1.1/0003:17EF:6009.0002/input/input3/event2"
[ 59.111] (II) XINPUT: Adding extended input device "Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint" (type: KEYBOARD, id 10)
[ 59.111] (**) Option "xkb_rules" "evdev"
[ 59.111] (**) Option "xkb_model" "pc104"
[ 59.111] (**) Option "xkb_layout" "us"
[ 59.111] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 59.111] (II) evdev: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: initialized for relative axes.
[ 59.112] (**) Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: (accel) keeping acceleration scheme 1
[ 59.112] (**) Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: (accel) acceleration profile 0
[ 59.112] (**) Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: (accel) acceleration factor: 2.000
[ 59.112] (**) Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: (accel) acceleration threshold: 4
[ 59.112] (II) config/udev: Adding input device Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint (/dev/input/js0)
[ 59.112] (**) Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Applying InputClass "Keyboard Defaults"
[ 59.112] (II) No input driver specified, ignoring this device.
[ 59.112] (II) This device may have been added with another device file.
[ 59.112] (II) config/udev: Adding input device Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint (/dev/input/mouse0)
[ 59.112] (**) Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint: Applying InputClass "Keyboard Defaults"
[ 59.112] (II) No input driver specified, ignoring this device.
[ 59.112] (II) This device may have been added with another device file.
[ 59.113] (II) config/udev: Adding input device Logitech USB Gaming Mouse (/dev/input/event3)
[ 59.113] (**) Logitech USB Gaming Mouse: Applying InputClass "evdev pointer catchall"
[ 59.113] (**) Logitech USB Gaming Mouse: Applying InputClass "evdev pointer catchall"
[ 59.157] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 16 paused 0
[ 59.157] (II) Using input driver 'evdev' for 'Logitech USB Gaming Mouse'
[ 59.157] (**) Logitech USB Gaming Mouse: always reports core events
[ 59.157] (**) evdev: Logitech USB Gaming Mouse: Device: "/dev/input/event3"
[ 59.157] (--) evdev: Logitech USB Gaming Mouse: Vendor 0x46d Product 0xc042
[ 59.157] (--) evdev: Logitech USB Gaming Mouse: Found 20 mouse buttons
[ 59.157] (--) evdev: Logitech USB Gaming Mouse: Found scroll wheel(s)
[ 59.157] (--) evdev: Logitech USB Gaming Mouse: Found relative axes
[ 59.157] (--) evdev: Logitech USB Gaming Mouse: Found x and y relative axes
[ 59.157] (II) evdev: Logitech USB Gaming Mouse: Configuring as mouse
[ 59.157] (II) evdev: Logitech USB Gaming Mouse: Adding scrollwheel support
[ 59.157] (**) evdev: Logitech USB Gaming Mouse: YAxisMapping: buttons 4 and 5
[ 59.157] (**) evdev: Logitech USB Gaming Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 59.157] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb7/7-5/7-5.3/7-5.3:1.0/0003:046D:C042.0003/input/input4/event3"
[ 59.157] (II) XINPUT: Adding extended input device "Logitech USB Gaming Mouse" (type: MOUSE, id 11)
[ 59.157] (II) evdev: Logitech USB Gaming Mouse: initialized for relative axes.
[ 59.158] (**) Logitech USB Gaming Mouse: (accel) keeping acceleration scheme 1
[ 59.158] (**) Logitech USB Gaming Mouse: (accel) acceleration profile 0
[ 59.158] (**) Logitech USB Gaming Mouse: (accel) acceleration factor: 2.000
[ 59.158] (**) Logitech USB Gaming Mouse: (accel) acceleration threshold: 4
[ 59.158] (II) config/udev: Adding input device Logitech USB Gaming Mouse (/dev/input/mouse1)
[ 59.158] (II) No input driver specified, ignoring this device.
[ 59.158] (II) This device may have been added with another device file.
[ 59.158] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[ 59.158] (II) No input driver specified, ignoring this device.
[ 59.158] (II) This device may have been added with another device file.
[ 59.158] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10)
[ 59.159] (II) No input driver specified, ignoring this device.
[ 59.159] (II) This device may have been added with another device file.
[ 59.159] (II) config/udev: Adding input device HDA Intel Dock Mic (/dev/input/event11)
[ 59.159] (II) No input driver specified, ignoring this device.
[ 59.159] (II) This device may have been added with another device file.
[ 59.159] (II) config/udev: Adding input device HDA Intel Dock Headphone (/dev/input/event12)
[ 59.159] (II) No input driver specified, ignoring this device.
[ 59.159] (II) This device may have been added with another device file.
[ 59.159] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event13)
[ 59.159] (II) No input driver specified, ignoring this device.
[ 59.159] (II) This device may have been added with another device file.
[ 59.160] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 59.160] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 59.160] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 59.160] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
[ 59.160] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 17 paused 0
[ 59.160] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 59.160] (**) AT Translated Set 2 keyboard: always reports core events
[ 59.160] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 59.160] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 59.160] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 59.160] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 59.160] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 59.160] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 59.160] (**) Option "xkb_rules" "evdev"
[ 59.160] (**) Option "xkb_model" "pc104"
[ 59.160] (**) Option "xkb_layout" "us"
[ 59.160] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 59.161] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event14)
[ 59.161] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 59.161] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 59.161] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 59.161] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 59.161] (II) systemd-logind: got fd for /dev/input/event14 13:78 fd 18 paused 0
[ 59.161] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
[ 59.161] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 59.161] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event14"
[ 59.161] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 59.161] (--) evdev: SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
[ 59.161] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes
[ 59.161] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes
[ 59.161] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad.
[ 59.161] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad
[ 59.161] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[ 59.161] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 59.161] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input15/event14"
[ 59.161] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 59.162] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes.
[ 59.162] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 59.162] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[ 59.162] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 59.162] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 59.162] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
[ 59.162] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 59.162] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event15)
[ 59.162] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 59.162] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 59.162] (**) TPPS/2 IBM TrackPoint: Applying InputClass "Trackpoint Wheel Emulation"
[ 59.207] (II) systemd-logind: got fd for /dev/input/event15 13:79 fd 19 paused 0
[ 59.207] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 59.207] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 59.207] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event15"
[ 59.207] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 59.207] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 59.207] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 59.207] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 59.207] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 59.207] (**) Option "Emulate3Buttons" "false"
[ 59.207] (**) Option "EmulateWheel" "true"
[ 59.207] (**) Option "EmulateWheelButton" "2"
[ 59.207] (**) Option "YAxisMapping" "4 5"
[ 59.207] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 59.207] (**) Option "XAxisMapping" "6 7"
[ 59.207] (**) evdev: TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7
[ 59.207] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 59.207] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input16/event15"
[ 59.207] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 14)
[ 59.207] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 59.207] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 59.208] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 59.208] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 59.208] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 59.208] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse3)
[ 59.208] (II) No input driver specified, ignoring this device.
[ 59.208] (II) This device may have been added with another device file.
[ 59.208] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event8)
[ 59.208] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 59.208] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 59.208] (**) ThinkPad Extra Buttons: Applying InputClass "Keyboard Defaults"
[ 59.209] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 20 paused 0
[ 59.209] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 59.209] (**) ThinkPad Extra Buttons: always reports core events
[ 59.209] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event8"
[ 59.209] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 59.209] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 59.209] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 59.209] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input9/event8"
[ 59.209] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 15)
[ 59.209] (**) Option "xkb_rules" "evdev"
[ 59.209] (**) Option "xkb_model" "pc104"
[ 59.209] (**) Option "xkb_layout" "us"
[ 59.209] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 59.497] (II) RADEON(0): EDID vendor "IBM", prod id 10375
[ 59.497] (II) RADEON(0): Printing DDC gathered Modelines:
[ 59.497] (II) RADEON(0): Modeline "1680x1050"x0.0 120.60 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (63.9 kHz eP)
[ 59.497] (II) RADEON(0): Modeline "1680x1050"x0.0 100.53 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (53.2 kHz e)
[ 59.568] (II) RADEON(0): EDID vendor "IBM", prod id 10375
[ 59.568] (II) RADEON(0): Printing DDC gathered Modelines:
[ 59.568] (II) RADEON(0): Modeline "1680x1050"x0.0 120.60 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (63.9 kHz eP)
[ 59.568] (II) RADEON(0): Modeline "1680x1050"x0.0 100.53 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (53.2 kHz e)
[ 59.941] (II) RADEON(0): EDID vendor "IBM", prod id 10375
[ 59.941] (II) RADEON(0): Printing DDC gathered Modelines:
[ 59.941] (II) RADEON(0): Modeline "1680x1050"x0.0 120.60 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (63.9 kHz eP)
[ 59.941] (II) RADEON(0): Modeline "1680x1050"x0.0 100.53 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (53.2 kHz e)
[ 60.027] (II) RADEON(0): EDID vendor "IBM", prod id 10375
[ 60.027] (II) RADEON(0): Printing DDC gathered Modelines:
[ 60.027] (II) RADEON(0): Modeline "1680x1050"x0.0 120.60 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (63.9 kHz eP)
[ 60.027] (II) RADEON(0): Modeline "1680x1050"x0.0 100.53 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (53.2 kHz e)
[ 60.099] (II) RADEON(0): EDID vendor "IBM", prod id 10375
[ 60.099] (II) RADEON(0): Printing DDC gathered Modelines:
[ 60.099] (II) RADEON(0): Modeline "1680x1050"x0.0 120.60 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (63.9 kHz eP)
[ 60.099] (II) RADEON(0): Modeline "1680x1050"x0.0 100.53 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (53.2 kHz e)
[ 61.044] (II) RADEON(0): EDID vendor "IBM", prod id 10375
[ 61.044] (II) RADEON(0): Printing DDC gathered Modelines:
[ 61.044] (II) RADEON(0): Modeline "1680x1050"x0.0 120.60 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (63.9 kHz eP)
[ 61.044] (II) RADEON(0): Modeline "1680x1050"x0.0 100.53 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (53.2 kHz e)
[ 61.112] (II) RADEON(0): EDID vendor "IBM", prod id 10375
[ 61.112] (II) RADEON(0): Printing DDC gathered Modelines:
[ 61.112] (II) RADEON(0): Modeline "1680x1050"x0.0 120.60 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (63.9 kHz eP)
[ 61.112] (II) RADEON(0): Modeline "1680x1050"x0.0 100.53 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (53.2 kHz e)
[ 62.930] (II) RADEON(0): EDID vendor "IBM", prod id 10375
[ 62.930] (II) RADEON(0): Printing DDC gathered Modelines:
[ 62.930] (II) RADEON(0): Modeline "1680x1050"x0.0 120.60 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (63.9 kHz eP)
[ 62.930] (II) RADEON(0): Modeline "1680x1050"x0.0 100.53 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (53.2 kHz e)
[ 89.683] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 89.730] (II) systemd-logind: got pause for 226:0
[ 89.730] (II) systemd-logind: got pause for 13:70
[ 89.730] (II) systemd-logind: got pause for 13:71
[ 89.730] (II) systemd-logind: got pause for 13:69
[ 89.730] (II) systemd-logind: got pause for 13:65
[ 89.730] (II) systemd-logind: got pause for 13:66
[ 89.730] (II) systemd-logind: got pause for 13:67
[ 89.730] (II) systemd-logind: got pause for 13:64
[ 89.730] (II) systemd-logind: got pause for 13:78
[ 89.730] (II) systemd-logind: got pause for 13:79
[ 89.730] (II) systemd-logind: got pause for 13:72
[ 90.518] (II) systemd-logind: got resume for 226:0
[ 90.518] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 90.551] (II) RADEON(0): EDID vendor "IBM", prod id 10375
[ 90.551] (II) RADEON(0): Printing DDC gathered Modelines:
[ 90.551] (II) RADEON(0): Modeline "1680x1050"x0.0 120.60 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (63.9 kHz eP)
[ 90.551] (II) RADEON(0): Modeline "1680x1050"x0.0 100.53 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (53.2 kHz e)
[ 90.591] (II) systemd-logind: got resume for 13:70
[ 90.591] (II) systemd-logind: got resume for 13:71
[ 90.592] (II) systemd-logind: got resume for 13:69
[ 90.592] (II) systemd-logind: got resume for 13:65
[ 90.592] (II) systemd-logind: got resume for 13:66
[ 90.603] (II) systemd-logind: got resume for 13:67
[ 90.616] (II) systemd-logind: got resume for 13:64
[ 90.620] (II) systemd-logind: got resume for 13:78
[ 90.633] (II) systemd-logind: got resume for 13:79
[ 90.641] (II) systemd-logind: got resume for 13:72
[ 95.368] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 95.429] (II) systemd-logind: got pause for 226:0
[ 95.429] (II) systemd-logind: got pause for 13:70
[ 95.429] (II) systemd-logind: got pause for 13:71
[ 95.429] (II) systemd-logind: got pause for 13:69
[ 95.429] (II) systemd-logind: got pause for 13:65
[ 95.429] (II) systemd-logind: got pause for 13:66
[ 95.429] (II) systemd-logind: got pause for 13:67
[ 95.429] (II) systemd-logind: got pause for 13:64
[ 95.429] (II) systemd-logind: got pause for 13:78
[ 95.429] (II) systemd-logind: got pause for 13:79
[ 95.429] (II) systemd-logind: got pause for 13:72
[ 95.750] (II) systemd-logind: got resume for 226:0
[ 95.750] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 95.783] (II) RADEON(0): EDID vendor "IBM", prod id 10375
[ 95.783] (II) RADEON(0): Printing DDC gathered Modelines:
[ 95.784] (II) RADEON(0): Modeline "1680x1050"x0.0 120.60 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (63.9 kHz eP)
[ 95.784] (II) RADEON(0): Modeline "1680x1050"x0.0 100.53 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (53.2 kHz e)
[ 95.821] (II) systemd-logind: got resume for 13:70
[ 95.821] (II) systemd-logind: got resume for 13:71
[ 95.821] (II) systemd-logind: got resume for 13:69
[ 95.821] (II) systemd-logind: got resume for 13:65
[ 95.836] (II) systemd-logind: got resume for 13:66
[ 95.843] (II) systemd-logind: got resume for 13:67
[ 95.853] (II) systemd-logind: got resume for 13:64
[ 95.866] (II) systemd-logind: got resume for 13:78
[ 95.876] (II) systemd-logind: got resume for 13:79
[ 95.897] (II) systemd-logind: got resume for 13:72
[ 98.008] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 98.061] (II) systemd-logind: got pause for 226:0
[ 98.061] (II) systemd-logind: got pause for 13:70
[ 98.061] (II) systemd-logind: got pause for 13:71
[ 98.061] (II) systemd-logind: got pause for 13:69
[ 98.061] (II) systemd-logind: got pause for 13:65
[ 98.061] (II) systemd-logind: got pause for 13:66
[ 98.061] (II) systemd-logind: got pause for 13:67
[ 98.061] (II) systemd-logind: got pause for 13:64
[ 98.061] (II) systemd-logind: got pause for 13:78
[ 98.061] (II) systemd-logind: got pause for 13:79
[ 98.061] (II) systemd-logind: got pause for 13:72
[ 98.614] (II) systemd-logind: got resume for 226:0
[ 98.614] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 98.648] (II) RADEON(0): EDID vendor "IBM", prod id 10375
[ 98.648] (II) RADEON(0): Printing DDC gathered Modelines:
[ 98.648] (II) RADEON(0): Modeline "1680x1050"x0.0 120.60 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (63.9 kHz eP)
[ 98.648] (II) RADEON(0): Modeline "1680x1050"x0.0 100.53 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (53.2 kHz e)
[ 98.687] (II) systemd-logind: got resume for 13:70
[ 98.688] (II) systemd-logind: got resume for 13:71
[ 98.688] (II) systemd-logind: got resume for 13:69
[ 98.688] (II) systemd-logind: got resume for 13:65
[ 98.693] (II) systemd-logind: got resume for 13:66
[ 98.703] (II) systemd-logind: got resume for 13:67
[ 98.710] (II) systemd-logind: got resume for 13:64
[ 98.723] (II) systemd-logind: got resume for 13:78
[ 98.726] (II) systemd-logind: got resume for 13:79
[ 98.743] (II) systemd-logind: got resume for 13:72
[ 99.618] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 99.674] (II) systemd-logind: got pause for 226:0
[ 99.674] (II) systemd-logind: got pause for 13:70
[ 99.674] (II) systemd-logind: got pause for 13:71
[ 99.674] (II) systemd-logind: got pause for 13:69
[ 99.674] (II) systemd-logind: got pause for 13:65
[ 99.674] (II) systemd-logind: got pause for 13:66
[ 99.674] (II) systemd-logind: got pause for 13:67
[ 99.674] (II) systemd-logind: got pause for 13:64
[ 99.674] (II) systemd-logind: got pause for 13:78
[ 99.674] (II) systemd-logind: got pause for 13:79
[ 99.674] (II) systemd-logind: got pause for 13:72
[ 123.984] (II) systemd-logind: got resume for 226:0
[ 123.984] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 124.017] (II) RADEON(0): EDID vendor "IBM", prod id 10375
[ 124.017] (II) RADEON(0): Printing DDC gathered Modelines:
[ 124.017] (II) RADEON(0): Modeline "1680x1050"x0.0 120.60 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (63.9 kHz eP)
[ 124.017] (II) RADEON(0): Modeline "1680x1050"x0.0 100.53 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (53.2 kHz e)
[ 124.096] (II) systemd-logind: got resume for 13:70
[ 124.096] (II) systemd-logind: got resume for 13:71
[ 124.096] (II) systemd-logind: got resume for 13:69
[ 124.096] (II) systemd-logind: got resume for 13:65
[ 124.104] (II) systemd-logind: got resume for 13:66
[ 124.118] (II) systemd-logind: got resume for 13:67
[ 124.130] (II) systemd-logind: got resume for 13:64
[ 124.140] (II) systemd-logind: got resume for 13:78
[ 124.150] (II) sYes - I'm using startx:
[[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && exec startx
.xinitrc:
/usr/bin/xscreensaver -no-splash &
xautolock -time 60 -locker "sudo pm-suspend" &
xset -dpms s noblank
xset b off
exec mate-session
Excerpt of the system journal (doesn't look suspicious for me): I just booted, logged in (startx), switch to tty2 to refresh the screen on tty1 and rebooted.
Sep 01 20:41:37 bra kernel: [drm] radeon kernel modesetting enabled.
Sep 01 20:41:37 bra kernel: [drm] initializing kernel modesetting (RV635 0x1002:0x9591 0x17AA:0x2117).
Sep 01 20:41:37 bra kernel: [drm] register mmio base: 0xCFFF0000
Sep 01 20:41:37 bra kernel: [drm] register mmio size: 65536
Sep 01 20:41:37 bra kernel: ATOM BIOS: M86M
Sep 01 20:41:37 bra kernel: radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
Sep 01 20:41:37 bra kernel: radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
Sep 01 20:41:37 bra kernel: [drm] Detected VRAM RAM=256M, BAR=256M
Sep 01 20:41:37 bra kernel: [drm] RAM width 128bits DDR
Sep 01 20:41:37 bra kernel: [TTM] Zone kernel: Available graphics memory: 4054930 kiB
Sep 01 20:41:37 bra kernel: [TTM] Zone dma32: Available graphics memory: 2097152 kiB
Sep 01 20:41:37 bra kernel: [TTM] Initializing pool allocator
Sep 01 20:41:37 bra kernel: [TTM] Initializing DMA pool allocator
Sep 01 20:41:37 bra kernel: [drm] radeon: 256M of VRAM memory ready
Sep 01 20:41:37 bra kernel: [drm] radeon: 512M of GTT memory ready.
Sep 01 20:41:37 bra kernel: [drm] Loading RV635 Microcode
Sep 01 20:41:37 bra kernel: [drm] radeon: power management initialized
Sep 01 20:41:37 bra kernel: [drm] GART: num cpu pages 131072, num gpu pages 131072
Sep 01 20:41:37 bra kernel: e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:25:9d:62:d0
Sep 01 20:41:37 bra kernel: e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
Sep 01 20:41:37 bra kernel: e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF
Sep 01 20:41:37 bra kernel: snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
Sep 01 20:41:37 bra kernel: ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102f conflicts with OpRegion 0x0000000000001000-0x000000000000107f (\_SB_.PCI0.LPC_.PMIO) (20140424/utaddress-258)
Sep 01 20:41:37 bra kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Sep 01 20:41:37 bra kernel: ACPI Warning: SystemIO range 0x00000000000011b0-0x00000000000011bf conflicts with OpRegion 0x0000000000001180-0x00000000000011ff (\_SB_.PCI0.LPC_.LPIO) (20140424/utaddress-258)
Sep 01 20:41:37 bra kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Sep 01 20:41:37 bra kernel: ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011af conflicts with OpRegion 0x0000000000001180-0x00000000000011ff (\_SB_.PCI0.LPC_.LPIO) (20140424/utaddress-258)
Sep 01 20:41:37 bra kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Sep 01 20:41:37 bra kernel: lpc_ich: Resource conflict(s) found affecting gpio_ich
Sep 01 20:41:38 bra kernel: pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4300000-0xf7ffffff:
Sep 01 20:41:38 bra kernel: excluding 0xf4300000-0xf46cffff
Sep 01 20:41:38 bra kernel: yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf0000000-0xf3ffffff 64bit pref]
Sep 01 20:41:38 bra kernel: pcmcia_socket pcmcia_socket0: cs: memory probe 0xf0000000-0xf3ffffff:
Sep 01 20:41:38 bra kernel: excluding 0xf0000000-0xf3ffffff
Sep 01 20:41:38 bra kernel: r592: driver successfully loaded
Sep 01 20:41:38 bra kernel: r852: driver loaded successfully
Sep 01 20:41:38 bra kernel: microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
Sep 01 20:41:38 bra kernel: microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
Sep 01 20:41:38 bra kernel: microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
Sep 01 20:41:38 bra kernel: ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
Sep 01 20:41:38 bra kernel: [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
Sep 01 20:41:38 bra kernel: radeon 0000:01:00.0: WB enabled
Sep 01 20:41:38 bra kernel: radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000010000c00 and cpu addr 0xffff8800bacd5c00
Sep 01 20:41:38 bra kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Sep 01 20:41:38 bra kernel: [drm] Driver supports precise vblank timestamp query.
Sep 01 20:41:38 bra kernel: radeon 0000:01:00.0: irq 49 for MSI/MSI-X
Sep 01 20:41:38 bra kernel: radeon 0000:01:00.0: radeon: using MSI.
Sep 01 20:41:38 bra kernel: [drm] radeon: irq initialized.
Sep 01 20:41:38 bra kernel: [drm] ring test on 0 succeeded in 1 usecs
Sep 01 20:41:38 bra kernel: [drm] ib test on ring 0 succeeded in 0 usecs
Sep 01 20:41:38 bra kernel: [drm] radeon atom DIG backlight initialized
Sep 01 20:41:38 bra kernel: [drm] Radeon Display Connectors
Sep 01 20:41:38 bra kernel: [drm] Connector 0:
Sep 01 20:41:38 bra kernel: [drm] DVI-I-1
Sep 01 20:41:38 bra kernel: [drm] HPD3
Sep 01 20:41:38 bra kernel: [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
Sep 01 20:41:38 bra kernel: [drm] Encoders:
Sep 01 20:41:38 bra kernel: [drm] DFP1: INTERNAL_UNIPHY
Sep 01 20:41:38 bra kernel: [drm] Connector 1:
Sep 01 20:41:38 bra kernel: [drm] LVDS-1
Sep 01 20:41:38 bra kernel: [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
Sep 01 20:41:38 bra kernel: [drm] Encoders:
Sep 01 20:41:38 bra kernel: [drm] LCD1: INTERNAL_KLDSCP_LVTMA
Sep 01 20:41:38 bra kernel: [drm] Connector 2:
Sep 01 20:41:38 bra kernel: [drm] DP-1
Sep 01 20:41:38 bra kernel: [drm] HPD1
Sep 01 20:41:38 bra kernel: [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
Sep 01 20:41:38 bra kernel: [drm] Encoders:
Sep 01 20:41:38 bra kernel: [drm] DFP2: INTERNAL_UNIPHY
Sep 01 20:41:38 bra kernel: [drm] Connector 3:
Sep 01 20:41:38 bra kernel: [drm] VGA-1
Sep 01 20:41:38 bra kernel: [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
Sep 01 20:41:38 bra kernel: [drm] Encoders:
Sep 01 20:41:38 bra kernel: [drm] CRT1: INTERNAL_KLDSCP_DAC1
Sep 01 20:41:38 bra kernel: ppdev: user-space parallel port driver
Sep 01 20:41:38 bra systemd[1]: Starting Sound Card.
Sep 01 20:41:38 bra systemd[1]: Reached target Sound Card.
Sep 01 20:41:38 bra kernel: iTCO_vendor_support: vendor-support=0
Sep 01 20:41:38 bra kernel: pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
Sep 01 20:41:38 bra kernel: excluding 0xc0000-0xd3fff 0xdc000-0xfffff
Sep 01 20:41:38 bra kernel: pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
Sep 01 20:41:38 bra kernel: excluding 0xa0000000-0xa0ffffff
Sep 01 20:41:38 bra kernel: pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
Sep 01 20:41:38 bra kernel: excluding 0x60000000-0x60ffffff
Sep 01 20:41:38 bra kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
Sep 01 20:41:38 bra kernel: iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060)
Sep 01 20:41:38 bra kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Sep 01 20:41:38 bra systemd-udevd[219]: Error calling EVIOCSKEYCODE on device node '/dev/input/event1' (scan code 0x90010, key code 190): Invalid argument
Sep 01 20:41:38 bra systemd-udevd[219]: Error calling EVIOCSKEYCODE on device node '/dev/input/event1' (scan code 0x90011, key code 148): Invalid argument
Sep 01 20:41:38 bra systemd-udevd[219]: Error calling EVIOCSKEYCODE on device node '/dev/input/event1' (scan code 0x90012, key code 152): Invalid argument
Sep 01 20:41:38 bra systemd-udevd[219]: Error calling EVIOCSKEYCODE on device node '/dev/input/event1' (scan code 0x90013, key code 236): Invalid argument
Sep 01 20:41:38 bra systemd-udevd[219]: Error calling EVIOCSKEYCODE on device node '/dev/input/event1' (scan code 0x90014, key code 238): Invalid argument
Sep 01 20:41:38 bra systemd-udevd[219]: Error calling EVIOCSKEYCODE on device node '/dev/input/event1' (scan code 0x90015, key code 212): Invalid argument
Sep 01 20:41:38 bra systemd-udevd[219]: Error calling EVIOCSKEYCODE on device node '/dev/input/event1' (scan code 0x90016, key code 227): Invalid argument
Sep 01 20:41:38 bra systemd-udevd[219]: Error calling EVIOCSKEYCODE on device node '/dev/input/event1' (scan code 0x90017, key code 191): Invalid argument
Sep 01 20:41:38 bra systemd-udevd[219]: Error calling EVIOCSKEYCODE on device node '/dev/input/event1' (scan code 0x90019, key code 205): Invalid argument
Sep 01 20:41:38 bra systemd-udevd[219]: Error calling EVIOCSKEYCODE on device node '/dev/input/event1' (scan code 0x9001a, key code 225): Invalid argument
Sep 01 20:41:38 bra systemd-udevd[219]: Error calling EVIOCSKEYCODE on device node '/dev/input/event1' (scan code 0x9001b, key code 224): Invalid argument
Sep 01 20:41:38 bra systemd-udevd[219]: Error calling EVIOCSKEYCODE on device node '/dev/input/event1' (scan code 0x9001d, key code 372): Invalid argument
Sep 01 20:41:38 bra systemd-udevd[227]: renamed network interface wlan0 to wlp3s0
Sep 01 20:41:39 bra kernel: [drm] fb mappable at 0xD0141000
Sep 01 20:41:39 bra kernel: [drm] vram apper at 0xD0000000
Sep 01 20:41:39 bra kernel: [drm] size 7299072
Sep 01 20:41:39 bra kernel: [drm] fb depth is 24
Sep 01 20:41:39 bra kernel: [drm] pitch is 6912
Sep 01 20:41:39 bra kernel: fbcon: radeondrmfb (fb0) is primary device
Sep 01 20:41:39 bra kernel: Console: switching to colour frame buffer device 210x65
Sep 01 20:41:39 bra kernel: radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
Sep 01 20:41:39 bra kernel: radeon 0000:01:00.0: registered panic notifier
Sep 01 20:41:39 bra kernel: [drm] Initialized radeon 2.39.0 20080528 for 0000:01:00.0 on minor 0
Sep 01 20:41:38 bra systemd[1]: Started Trigger Flushing of Journal to Persistent Storage.
Sep 01 20:41:39 bra systemd[1]: Started Update UTMP about System Boot/Shutdown.
Sep 01 20:41:39 bra systemd[1]: Starting System Initialization.
Sep 01 20:41:39 bra systemd[1]: Reached target System Initialization.
Sep 01 20:41:39 bra systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Sep 01 20:41:39 bra systemd[1]: Starting CUPS Printer Service Spool.
Sep 01 20:41:40 bra systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Sep 01 20:41:40 bra systemd[1]: Starting Login Service...
Sep 01 20:41:40 bra systemd[1]: Starting Permit User Sessions...
Sep 01 20:41:40 bra systemd[1]: Started LVM2 PV scan on device 254:0.
Sep 01 20:41:40 bra systemd[1]: Started Restore Sound Card State.
Sep 01 20:41:40 bra systemd[1]: Starting system-systemd\x2dbacklight.slice.
Sep 01 20:41:40 bra systemd[1]: Created slice system-systemd\x2dbacklight.slice.
Sep 01 20:41:40 bra systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:radeon_bl0...
Sep 01 20:41:40 bra systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:acpi_video0...
Sep 01 20:41:40 bra systemd[1]: Started Permit User Sessions.
Sep 01 20:41:40 bra systemd[1]: Starting Getty on tty1...
Sep 01 20:41:40 bra systemd[1]: Started Getty on tty1.
Sep 01 20:41:40 bra systemd[1]: Starting Login Prompts.
Sep 01 20:41:40 bra systemd[1]: Reached target Login Prompts.
Sep 01 20:41:40 bra systemd-logind[416]: New seat seat0.
Sep 01 20:41:40 bra systemd-logind[416]: Watching system buttons on /dev/input/event6 (Power Button)
Sep 01 20:41:40 bra systemd-logind[416]: Watching system buttons on /dev/input/event7 (Video Bus)
Sep 01 20:41:40 bra systemd-logind[416]: Watching system buttons on /dev/input/event4 (Lid Switch)
Sep 01 20:41:40 bra systemd-logind[416]: Watching system buttons on /dev/input/event5 (Sleep Button)
Sep 01 20:41:40 bra systemd-logind[416]: Watching system buttons on /dev/input/event8 (ThinkPad Extra Buttons)
Sep 01 20:41:40 bra systemd[1]: Started Login Service.
Sep 01 20:41:40 bra systemd[1]: Started Initialize hardware monitoring sensors.
Sep 01 20:41:40 bra systemd[1]: Started Load/Save Screen Backlight Brightness of backlight:radeon_bl0.
Sep 01 20:41:40 bra systemd[1]: Started Load/Save Screen Backlight Brightness of backlight:acpi_video0.
Sep 01 20:41:40 bra dbus[392]: [system] Activating via systemd: service name='org.freedesktop.PolicyKit1' unit='polkit.service'
Sep 01 20:41:40 bra systemd[1]: Starting Authorization Manager...
Sep 01 20:41:40 bra dbus[392]: [system] Activating via systemd: service name='org.freedesktop.ColorManager' unit='colord.service'
Sep 01 20:41:40 bra systemd[1]: Starting Manage, Install and Generate Color Profiles...
Sep 01 20:41:40 bra polkitd[520]: Started polkitd version 0.112
Sep 01 20:41:40 bra dbus[392]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Sep 01 20:41:40 bra systemd[1]: Started Manage, Install and Generate Color Profiles.
Sep 01 20:41:40 bra polkitd[520]: Loading rules from directory /etc/polkit-1/rules.d
Sep 01 20:41:40 bra polkitd[520]: Loading rules from directory /usr/share/polkit-1/rules.d
Sep 01 20:41:40 bra polkitd[520]: Finished loading, compiling and executing 2 rules
Sep 01 20:41:40 bra dbus[392]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Sep 01 20:41:40 bra systemd[1]: Started Authorization Manager.
Sep 01 20:41:40 bra polkitd[520]: Acquired the name org.freedesktop.PolicyKit1 on the system bus
Sep 01 20:41:40 bra dkms[391]: Kernel preparation unnecessary for this kernel. Skipping...
Sep 01 20:41:41 bra dkms[391]: Building module:
Sep 01 20:41:41 bra kernel: e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
Sep 01 20:41:41 bra kernel: e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
Sep 01 20:41:43 bra kernel: e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
Sep 01 20:41:43 bra kernel: e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
Sep 01 20:41:43 bra dbus[392]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
Sep 01 20:41:43 bra dbus[392]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.nm-dispatcher.service': Unit dbus-org.freedesktop.nm-dispatcher.service failed to load: No such file or directory.
Sep 01 20:41:43 bra kernel: psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
Sep 01 20:41:44 bra dkms[391]: cleaning build area....
Sep 01 20:41:44 bra kernel: input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input16
Sep 01 20:41:44 bra avahi-daemon[383]: Registering new address record for fe80::21c:25ff:fe9d:62d0 on eth0.*.
Sep 01 20:41:47 bra dkms[391]: cd /var/lib/dkms/fglrx/8.892/build; sh make.sh --nohints --uname_r=3.16.1-1-ARCH --norootcheck....(bad exit status: 1)
Sep 01 20:41:47 bra dkms[391]: Error! Bad return status for module build on kernel: 3.16.1-1-ARCH (x86_64)
Sep 01 20:41:47 bra dkms[391]: Consult /var/lib/dkms/fglrx/8.892/build/make.log for more information.
Sep 01 20:41:47 bra systemd[1]: Started Dynamic Kernel Modules System.
Sep 01 20:41:48 bra login[427]: pam_unix(login:session): session opened for user hel by LOGIN(uid=0)
Sep 01 20:41:48 bra systemd[1]: Starting user-1000.slice.
Sep 01 20:41:48 bra systemd[1]: Created slice user-1000.slice.
Sep 01 20:41:48 bra systemd[1]: Starting User Manager for UID 1000...
Sep 01 20:41:48 bra systemd[867]: pam_unix(systemd-user:session): session opened for user hel by (uid=0)
Sep 01 20:41:48 bra systemd[1]: Starting Session c1 of user hel.
Sep 01 20:41:48 bra systemd[1]: Started Session c1 of user hel.
Sep 01 20:41:48 bra systemd-logind[416]: New session c1 of user hel.
Sep 01 20:41:48 bra systemd[867]: Starting Paths.
Sep 01 20:41:48 bra systemd[867]: Reached target Paths.
Sep 01 20:41:48 bra systemd[867]: Starting Timers.
Sep 01 20:41:48 bra systemd[867]: Reached target Timers.
Sep 01 20:41:48 bra systemd[867]: Starting Sockets.
Sep 01 20:41:48 bra systemd[867]: Reached target Sockets.
Sep 01 20:41:48 bra systemd[867]: Starting Basic System.
Sep 01 20:41:48 bra systemd[867]: Reached target Basic System.
Sep 01 20:41:48 bra systemd[867]: Starting Default.
Sep 01 20:41:48 bra systemd[867]: Reached target Default.
Sep 01 20:41:48 bra systemd[867]: Startup finished in 131ms.
Sep 01 20:41:48 bra systemd[1]: Started User Manager for UID 1000.
Sep 01 20:41:48 bra login[427]: LOGIN ON tty1 BY hel
Sep 01 20:41:48 bra NetworkManager[384]: <info> startup complete
Sep 01 20:41:54 bra dbus[392]: [system] Activating via systemd: service name='org.freedesktop.UDisks2' unit='udisks2.service'
Sep 01 20:41:54 bra dbus[392]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service'
Sep 01 20:41:54 bra systemd[1]: Starting RealtimeKit Scheduling Policy Service...
Sep 01 20:41:54 bra systemd[1]: Starting Disk Manager...
Sep 01 20:41:54 bra polkitd[520]: Registered Authentication Agent for unix-session:c1 (system bus name :1.16 [/usr/lib/mate-polkit/polkit-mate-authentication-agent-1], object path /org/mate/PolicyKit1/AuthenticationAgent, locale en_GB.UTF-8)
Sep 01 20:41:54 bra dbus[392]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
Sep 01 20:41:54 bra systemd[1]: Starting Daemon for power management...
Sep 01 20:41:54 bra udisksd[1121]: udisks daemon version 2.1.3 starting
Sep 01 20:41:54 bra dbus[392]: [system] Successfully activated service 'org.freedesktop.UPower'
Sep 01 20:41:54 bra systemd[1]: Started Daemon for power management.
Sep 01 20:41:54 bra dbus[392]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'
Sep 01 20:41:54 bra systemd[1]: Started RealtimeKit Scheduling Policy Service.
Sep 01 20:41:54 bra rtkit-daemon[1120]: Successfully called chroot.
Sep 01 20:41:54 bra rtkit-daemon[1120]: Successfully dropped privileges.
Sep 01 20:41:54 bra rtkit-daemon[1120]: Successfully limited resources.
Sep 01 20:41:54 bra rtkit-daemon[1120]: Running.
Sep 01 20:41:54 bra rtkit-daemon[1120]: Canary thread running.
Sep 01 20:41:54 bra rtkit-daemon[1120]: Watchdog thread running.
Sep 01 20:41:54 bra dbus[392]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Sep 01 20:41:54 bra systemd[1]: Started Disk Manager.
Sep 01 20:41:54 bra udisksd[1121]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Sep 01 20:41:54 bra rtkit-daemon[1120]: Successfully made thread 1119 of process 1119 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Sep 01 20:41:54 bra rtkit-daemon[1120]: Supervising 1 threads of 1 processes of 1 users.
Sep 01 20:41:54 bra org.a11y.Bus[1057]: Activating service name='org.a11y.atspi.Registry'
Sep 01 20:41:54 bra rtkit-daemon[1120]: Supervising 1 threads of 1 processes of 1 users.
Sep 01 20:41:54 bra rtkit-daemon[1120]: Successfully made thread 1193 of process 1119 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
Sep 01 20:41:54 bra rtkit-daemon[1120]: Supervising 2 threads of 1 processes of 1 users.
Sep 01 20:41:54 bra rtkit-daemon[1120]: Supervising 2 threads of 1 processes of 1 users.
Sep 01 20:41:54 bra rtkit-daemon[1120]: Successfully made thread 1194 of process 1119 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
Sep 01 20:41:54 bra rtkit-daemon[1120]: Supervising 3 threads of 1 processes of 1 users.
Sep 01 20:41:54 bra org.a11y.Bus[1057]: Successfully activated service 'org.a11y.atspi.Registry'
Sep 01 20:41:54 bra org.a11y.atspi.Registry[1176]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Sep 01 20:41:54 bra org.a11y.atspi.Registry[1176]: ** (at-spi2-registryd:1185): WARNING **: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files
Sep 01 20:41:54 bra org.a11y.atspi.Registry[1176]: ** (at-spi2-registryd:1185): WARNING **: Unable to register client with session manager
Sep 01 20:41:54 bra dbus[392]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Sep 01 20:41:54 bra dbus[392]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such file or directory.
Sep 01 20:41:55 bra rtkit-daemon[1120]: Successfully made thread 1206 of process 1206 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Sep 01 20:41:55 bra rtkit-daemon[1120]: Supervising 4 threads of 2 processes of 1 users.
Sep 01 20:41:55 bra rtkit-daemon[1120]: Successfully made thread 1208 of process 1208 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Sep 01 20:41:55 bra rtkit-daemon[1120]: Supervising 5 threads of 3 processes of 1 users.
Sep 01 20:41:55 bra pulseaudio[1208]: [pulseaudio] pid.c: Daemon already running.
Sep 01 20:41:56 bra dbus[392]: [system] Activating service name='org.mate.SettingsDaemon.DateTimeMechanism' (using servicehelper)
Sep 01 20:41:56 bra dbus[392]: [system] Successfully activated service 'org.mate.SettingsDaemon.DateTimeMechanism'
Sep 01 20:42:01 bra systemd-logind[416]: kernel does not support evdev-revocation
Sep 01 20:42:01 bra systemd[1]: Starting Getty on tty2...
Sep 01 20:42:01 bra systemd[1]: Started Getty on tty2.
Sep 01 20:42:05 bra systemd[1]: Started Getty on tty2.
Sep 01 20:42:08 bra systemd-logind[416]: System is rebooting.
Sep 01 20:42:08 bra systemd[1]: Stopping Session c1 of user hel.
Sep 01 20:42:08 bra systemd[1]: Stopped Session c1 of user hel.
Sep 01 20:42:08 bra systemd[1]: Stopping LVM2 PV scan on device 254:0...
Sep 01 20:42:08 bra systemd[1]: Stopping Sound Card.
Sep 01 20:42:08 bra systemd[1]: Stopped target Sound Card.
Sep 01 20:42:08 bra systemd[1]: Stopping system-systemd\x2dfsck.slice.
Sep 01 20:42:08 bra systemd[1]: Removed slice system-systemd\x2dfsck.slice.
Sep 01 20:42:08 bra systemd[1]: Stopping LVM2 metadata daemon...
Sep 01 20:42:08 bra systemd[1]: Stopping Daemon for power management...
Sep 01 20:42:08 bra systemd[1]: Stopping RealtimeKit Scheduling Policy Service...
Sep 01 20:42:08 bra systemd[1]: Stopping Disk Manager...
Sep 01 20:42:08 bra systemd[1]: Stopping User Manager for UID 1000...
Sep 01 20:42:09 bra systemd[867]: Stopping Default.
Sep 01 20:42:09 bra systemd[867]: Stopped target Default.
Sep 01 20:42:09 bra systemd[867]: Stopping Basic System.
Sep 01 20:42:09 bra systemd[867]: Stopped target Basic System.
Sep 01 20:42:09 bra systemd[867]: Stopping Paths.
Sep 01 20:42:09 bra systemd[867]: Stopped target Paths.
Sep 01 20:42:09 bra systemd[867]: Stopping Timers.
Sep 01 20:42:09 bra systemd[867]: Stopped target Timers.
Sep 01 20:42:09 bra systemd[867]: Stopping Sockets.
Sep 01 20:42:09 bra systemd[867]: Stopped target Sockets.
Sep 01 20:42:09 bra systemd[867]: Starting Shutdown.
Sep 01 20:42:09 bra systemd[867]: Reached target Shutdown.
Sep 01 20:42:09 bra systemd[867]: Starting Exit the Session...
Sep 01 20:42:09 bra kernel: IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Sep 01 20:42:08 bra polkitd[520]: Unregistered Authentication Agent for unix-session:c1 (system bus name :1.16, object path /org/mate/PolicyKit1/AuthenticationAgent, locale en_GB.UTF-8) (disconnected from bus)
Sep 01 20:42:08 bra thinkfan[387]: Caught deadly signal.
Sep 01 20:42:08 bra thinkfan[387]: Cleaning up and resetting fan control.
Sep 01 20:42:08 bra NetworkManager[384]: <info> caught signal 15, shutting down normally.
Sep 01 20:42:08 bra NetworkManager[384]: <info> (wlp3s0): device state change: unavailable -> unmanaged (reason 'removed') [20 10 36]
Sep 01 20:42:08 bra NetworkManager[384]: <info> exiting (success)
Sep 01 20:42:09 bra avahi-daemon[383]: Got SIGTERM, quitting.
Sep 01 20:42:09 bra avahi-daemon[383]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.100.53.
Sep 01 20:42:09 bra avahi-daemon[383]: avahi-daemon 0.6.31 exiting.
Sep 01 20:42:09 bra systemd[868]: pam_unix(systemd-user:session): session closed for user hel
Sep 01 20:42:09 bra systemd[867]: Received SIGRTMIN+24 from PID 1279 (kill).
Sep 01 20:42:09 bra NetworkManager[384]: (NetworkManager:384): GLib-CRITICAL **: Source ID 86 was not found when attempting to remove it
Sep 01 20:42:10 bra systemd[1]: Stopped Getty on tty1.
Sep 01 20:42:10 bra systemd[1]: Stopped Authorization Manager.
Sep 01 20:42:10 bra systemd[1]: Stopped Manage, Install and Generate Color Profiles.
Sep 01 20:42:10 bra systemd[1]: Stopped User Manager for UID 1000.
Sep 01 20:42:10 bra systemd[1]: Stopped RealtimeKit Scheduling Policy Service.
Sep 01 20:42:10 bra systemd[1]: Stopped Disk Manager.
Sep 01 20:42:10 bra systemd[1]: Stopped Daemon for power management.
Sep 01 20:42:10 bra systemd[1]: Stopped Getty on tty2.
Sep 01 20:42:10 bra systemd[1]: Stopped Initialize hardware monitoring sensors.
Sep 01 20:42:10 bra systemd[1]: Stopped Dynamic Kernel Modules System.
Sep 01 20:42:10 bra systemd[1]: Shutting down.
Sep 01 20:42:10 bra systemd[1]: Hardware watchdog 'INTCAMT', version 0
Sep 01 20:42:10 bra systemd[1]: Set hardware watchdog to 10min.
Sep 01 20:42:10 bra systemd-shutdown[1]: Sending SIGTERM to remaining processes...
Sep 01 20:42:10 bra systemd-journal[188]: Journal stopped
I can't downgrade the ati-driver because it needs glamor-egl which conflicts with xorg-1.16.
After deinstalling the ati-driver and removing the 20-radeon.conf file, I got the following error (Xorg.0.log):
[ 120.639]
X.Org X Server 1.16.0
Release Date: 2014-07-16
[ 120.639] X Protocol Version 11, Revision 0
[ 120.640] Build Operating System: Linux 3.15.5-2-ARCH x86_64
[ 120.640] Current Operating System: Linux bra 3.16.1-1-ARCH #1 SMP PREEMPT Thu Aug 14 07:40:19 CEST 2014 x86_64
[ 120.640] Kernel command line: BOOT_IMAGE=../vmlinuz-linux cryptdevice=/dev/sda2:main root=/dev/mapper/main-root ro locale=de_DE.UTF-8 initrd=../initramfs-linux.img
[ 120.640] Build Date: 31 July 2014 11:53:19AM
[ 120.640]
[ 120.640] Current version of pixman: 0.32.6
[ 120.640] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 120.640] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 120.640] (==) Log file: "/home/hel/.local/share/xorg/Xorg.0.log", Time: Mon Sep 1 20:28:35 2014
[ 120.641] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 120.641] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 120.641] (==) No Layout section. Using the first Screen section.
[ 120.641] (==) No screen section available. Using defaults.
[ 120.641] (**) |-->Screen "Default Screen Section" (0)
[ 120.641] (**) | |-->Monitor "<default monitor>"
[ 120.641] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 120.641] (==) Automatically adding devices
[ 120.641] (==) Automatically enabling devices
[ 120.641] (==) Automatically adding GPU devices
[ 120.641] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 120.641] Entry deleted from font path.
[ 120.641] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 120.641] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 120.641] Entry deleted from font path.
[ 120.641] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 120.641] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 120.641] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 120.641] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 120.641] (II) Loader magic: 0x818d80
[ 120.641] (II) Module ABI versions:
[ 120.641] X.Org ANSI C Emulation: 0.4
[ 120.641] X.Org Video Driver: 18.0
[ 120.641] X.Org XInput driver : 21.0
[ 120.641] X.Org Server Extension : 8.0
[ 120.740] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c4
[ 120.740] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 120.787] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 120.789] (--) PCI:*(0:1:0:0) 1002:9591:17aa:2117 rev 0, Mem @ 0xd0000000/268435456, 0xcfff0000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[ 120.789] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 120.790] (II) LoadModule: "glx"
[ 120.790] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 120.792] (II) Module glx: vendor="X.Org Foundation"
[ 120.792] compiled for 1.16.0, module version = 1.0.0
[ 120.792] ABI class: X.Org Server Extension, version 8.0
[ 120.792] (==) AIGLX enabled
[ 120.792] (==) Matched ati as autoconfigured driver 0
[ 120.792] (==) Matched ati as autoconfigured driver 1
[ 120.792] (==) Matched modesetting as autoconfigured driver 2
[ 120.792] (==) Matched fbdev as autoconfigured driver 3
[ 120.792] (==) Matched vesa as autoconfigured driver 4
[ 120.792] (==) Assigned the driver to the xf86ConfigLayout
[ 120.792] (II) LoadModule: "ati"
[ 120.792] (WW) Warning, couldn't open module ati
[ 120.792] (II) UnloadModule: "ati"
[ 120.792] (II) Unloading ati
[ 120.792] (EE) Failed to load module "ati" (module does not exist, 0)
[ 120.792] (II) LoadModule: "modesetting"
[ 120.792] (WW) Warning, couldn't open module modesetting
[ 120.792] (II) UnloadModule: "modesetting"
[ 120.792] (II) Unloading modesetting
[ 120.792] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 120.792] (II) LoadModule: "fbdev"
[ 120.793] (WW) Warning, couldn't open module fbdev
[ 120.793] (II) UnloadModule: "fbdev"
[ 120.793] (II) Unloading fbdev
[ 120.793] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 120.793] (II) LoadModule: "vesa"
[ 120.793] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 120.793] (II) Module vesa: vendor="X.Org Foundation"
[ 120.793] compiled for 1.16.0, module version = 2.3.2
[ 120.793] Module class: X.Org Video Driver
[ 120.793] ABI class: X.Org Video Driver, version 18.0
[ 120.793] (II) VESA: driver for VESA chipsets: vesa
[ 120.793] (++) using VT number 1
[ 120.793] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 120.793] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 120.793] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 120.793] (II) Loading sub module "vbe"
[ 120.793] (II) LoadModule: "vbe"
[ 120.793] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 120.793] (II) Module vbe: vendor="X.Org Foundation"
[ 120.793] compiled for 1.16.0, module version = 1.1.0
[ 120.793] ABI class: X.Org Video Driver, version 18.0
[ 120.793] (II) Loading sub module "int10"
[ 120.793] (II) LoadModule: "int10"
[ 120.793] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 120.793] (II) Module int10: vendor="X.Org Foundation"
[ 120.793] compiled for 1.16.0, module version = 1.0.0
[ 120.793] ABI class: X.Org Video Driver, version 18.0
[ 120.793] (II) VESA(0): initializing int10
[ 120.794] (WW) xf86ReadBIOS: Failed to open /dev/mem (Permission denied)
[ 120.794] (EE) VESA(0): Cannot read int vect
[ 120.794] (II) UnloadModule: "vesa"
[ 120.794] (II) UnloadSubModule: "int10"
[ 120.794] (II) Unloading int10
[ 120.794] (II) UnloadSubModule: "vbe"
[ 120.794] (II) Unloading vbe
[ 120.794] (EE) Screen(s) found, but none have a usable configuration.
[ 120.794] (EE)
Fatal server error:
[ 120.794] (EE) no screens found(EE)
[ 120.794] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 120.794] (EE) Please also check the log file at "/home/hel/.local/share/xorg/Xorg.0.log" for additional information.
[ 120.794] (EE)
[ 120.846] (EE) Server terminated with error (1). Closing log file.
"[ 120.794] (WW) xf86ReadBIOS: Failed to open /dev/mem (Permission denied)" seems to be the problem.
Edit: By the way: I'm using an external monitor but using the laptop without the external monitor leads to the same problem.
Last edited by hel (2014-09-01 19:10:09) -
Ok....so i've posted this question in a different way, and i gotten several "scratch the surface" answers from people just saying to install "Ati catalyst", or insert the os x dvd and run set up.exe, and update to boot camp 3.1 or 3.2...while these all seem like great suggestions, I am finding myself needing more specific direction or "hand holding" so to speak.....here is the MAIN problem...
The Background/history
I used boot camp (3.0, and i found updates for 3.1 for imac and for windows, but can't find for mac pro, AND they all are ".exe" files which run on windows..which as you'll see is the big part of my problem...So I recently updated my mac pro (with the ATI Radeon HD2600 graphic PCIe card with 10.6.7 from 10.5.8. I created a single partitioned drive to install windows 7 professional 64 bit. The download software function didn't work (Thanks, APPLE for that poor level of support) so have to select the option that i have already downloaded, or have other media with the drivers already on it....i restarted with the windows 7 disk in....
The installation of Windows 7 Pro 64-bit
So the installation of windows 7 seemed to go flawlessly, was able to use my existing 23" hd apple cinema display (so somehow it has drivers that work with the graphics card, or maybe the motherboard's on board video components) and i select english, and install now, custom, blah, blah, blah...installation causes a few reboots, then restarts ultimately back in os x since that is the default boot os i use on this desk top and have to do the "opt" button to select booting in windows....so when i try restarting in windows, now using the actual boot drive on which i am installing it, it ran through another reboot or two, but then after that, my display goes black.... in the communities, the solution sounds super simple... "go download the ATI catalyst for the black screen problem....windows 7 doesn't have device drivers that work with the ATI radeon hd2600...no problem, just go download and install...."
The problem, re-emphasized : I cannot even finish the install for windows, because of this driver problem....i cannot see anything....I have tried to reboot in safe mode, and that then seems to invoke whatever basic drivers that do work, likely through the motherboards onboard video vs the actual graphic card, and the screen works and says that it's wanting to complete the installation, so i'm thinking awesome this is gonna work....and then.. "windows installation was not completed and cannot be completed in SAFE MODE, need to restart, blah, blah, blah" pops up...and forces reboot...so Safe Mode allows me to see, but won't allow me to finish the install of windows 7...and without completing the install i can't run (ranther I DONT KNOW HOW TO) any of the various .exe files everyone is telling me are the solutions to my problem...like update 3.1 and 3.2 bootcamp...they're all .exe files? not sure why, because bootcamp runs in 10.6.7 i thought, but whatever...it needs running Windows to execute...then the ATI radeon hd2600 driver for windows 7 that i downloaded from the site has an installation program that is an .exe file, which needs windows to run... Does this make sense, why i can't just use these fixes, that seem to be the only fixes out there....so can someone school me step by step here (not just the highlights) of how to update bootcamp, and how to install the ati radeon driver without having been able to complete the windows 7 installation because the monitor goes and stays black????
This is so very frustrating for the record...and any substantial help "not just go download this..." would be immensely appreciated.
Some other things i've been told to try that i've tried and nothing seems to happen as i'm told it will....
---I've been told to install the osx dvd and run "setup.exe" - AGAIN...it's an exe file...and 2 - when i put in the os x file it just wants to re install 10.6...so need more help if this is even a real solution to understand how to make it work...
---I've been told to update boot camp to 3.1 and/or 3.2 from 3.0, using Apple Software Update....Well, my software update is saying everything is up to date and there is nothing new to download at all, and when i reverify the bootcamp version it is still only 3.0.2...and again downloading the updates from www.apple.com/support/ for 3.1 and 3.2...all of those are .exe files...need windows to run them...again, refer to the problem described in detail above...
---I've been referred to the black screen on imac early 2011 thread saying it should fix my problem...and reading it it SEEMED like the most promising resolution...it involves creating a boot flash drive for windows 7 and an xml file that sets the imac drivers to auto install during the windows installation..and it got me farther than anything else..but still ultimately ended up in the darned black screen...my assumption is that it's because it's for imac and not mac pro so not ati-radeon specific drivers....ok....that's enough..please...anyone who thinks they can help...your help is desperately needed...thanks so much in advance!hey Hatter, thanks so much for getting back...so just to be super clear...is there no way to install the drivers using an exe file given my current state? no way to do it with command prompt or something? if can make work with existing card, i'd prefer it...now when you say it's 'toast' how do you mean? it works well with the os x partitions and always has...so i'm not sure i follow, just want to be clear...
Now to your point of starting with only the one drive installed...so i would put that bootcamp drive in bay 1 and disconnect the rest...i'm not totally sure what you're suggesting the effect should be of doing this? just that i'm just installing windows without the bootcamp deal...but if windows 7 doesn't support the ati radeon hd2600, it still will go black screen no? or you're saying it will run video through the motherboard if it's the only bootdrive, and will run all the way through the windows install without trying to switch over to the hd2600? (slrry flr these questions..just really want to make sure i understand what you're telling me..thanks so much for your patience and help by the way...it's very greatly appreciated...your support is priceless!
So now, assuming none of the above is possible...referring now to the ati 5770 that you referred to...you mention it works with 10.6 well, and that windows 7 supports it ...2 questions on that
1) Windows 7 supports" meaning, out of the box windows 7 supports it? or will i have to install drivers still through some update, because again, if that's how i have to do it, then won't work, cuz can't start windows to see anything to install any drivers or run any thing at all...so it would have to just work with initial installation.
2)hardware wise for my Mac Pro 3,1...intel dual quad core xeon, blah blah....will this card work? it's a PCIe and should fit on my board no prob, etc? -
"Display ATI Radeon Family driver stopped responding and has recovered"
For the past few days my laptop Model HP G61-409CA has been displaying broken black and white horizontal lines and black, white, and coloured random squares on my screen. When it freezes the screen and mouse stops moving and the screen goes blank for about 5 seconds then comes back with the error (Display ATI Radeon Family driver stopped responding and has recovered) appears with a yellow triangle. Unfortunetly when i click on the triangle nothing opens up.
Ive tried to download Catalyst Control Centre because when I researched many people spoke about not being able to find their control centre and that it had something to do with the displaying error on the screen. I cant seem to find the folder or the program on my computer, but when i tried to install something similar from http://support.amd.com/en-us/download/mobile?os=Windows%207%20-%2064#amd-catalyst-packages less than half way through the computer displayed a Blue screen and had to shut down. Also when i recovered my laptop the problem did not go away.
My product number : WA964UA#ABC
OS: Windows 7 for x64 based systems
Please let me know what needs to be done ive tried updating all my drivers aswell!Hi Quesspee,
Thank you for your query, I am happy to assist you!
I grasp that a few days ago your display started showing broken black and white horizontal lines and black, white, and coloured random squares on your screen . When it freezes the screen and mouse stops moving and the screen goes blank for about 5 seconds then comes back with the error (Display ATI Radeon Family driver stopped responding and has recovered) appears with a yellow triangle. When you clicked on the triangle, nothing happened.
You tried installing the Catalyst Control Center and approximately 1/2 through, you received a blue screen and your system shut down.
You tried doing a recovery but the issue remained.
I suggest you test for hardware failures. Testing for Hardware Failures (Windows 7)
If this did not help to locate the issue, I suggest contacting HP support for further assistance. They have the ability to remotely log onto your system, to help locate and resolve issues.
Please call HP technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region HP Technical Support Sitemap.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!
Maybe you are looking for
-
Need help with BW Process chain issue
Hi Gurus, I had made a copy of the existing process chain so that I can work on the changes. Its a metachain and I tried to copy a sub chain. But at a later point of time, I have realized that the process chain had got into a nested loop in the meta
-
I sometimes have blue and red square-shaped dots appear on my MBP; especially but not exclusively when I'm watching videos. The dots don't stay in the same place; and also they are not there all the time. Also, sometimes my animations (applications
-
How do I change the duration of slides?
I'm using PE11 and am making a picture slide show video. I'm attempting to edit the duration of my slides, but when I slide them manually on the screen (via split track) they all end up different lengths - some a perfect 5 seconds, others 1 second.
-
PL/SQL Equivalent for TAB in SQL
What is the equivalent of a TAB in SQL to use with a REPLACE function? <CR><LF> = CHR(13)||CHAR(10)) what is <TAB> = ??????? Miller
-
How do i be able to create the templates and layouts of the Oracle Forms . So that standardization can be maintained in the whole application.....?? Please help........