T500 Bluetooth driver upgrade problem, risk of wiping the harddrive

Hi,
I tried to upgrade my bluetooth driver on my laptop. The upgrade failed. After that I get an error when the computer starts.
"The program can't start because btwhidcs.dll is missing from your computer. Try reinstalling the program to fix this problem"
When I try to reinstall, first all goes well. At the last part of the installation I get an "Error 1935. An error occurred during the installation of assembly"
When I search on google this seems like a common problem. But I haven't found a solution for it anywhere.
What I did found that for some people files where deleted on the system drive when they tried to uninstall their old driver.
Here are some people that lost data on their harddrive when trying to uninstall the old driver.
Unable to install bluetooth driver
Broadcom bluetooth
Bluetooth with enhanced data rate software II
Bluetooth update killed my Windows 7
installation of bluetooth driver error 1935
Potential data wipe while updating x220 bluetooth driver
Widcomm uninstallation wipes out the computer
Lenovo and others seems to have suggested to uninstall the old driver when people have requested help.
Bluetooth installation problem
Here I found some posts that might help with finding a solution. It is about kb970652. Not sure what needs to be done though.
Error 1935
This seems like a known problem that should be fixed in version 6.4 version of the drivers.
Installation of bluetooth driver error 1935
but there is no post in the thread with the new drivers or information about them. After a lot of searching I found a post where Lenovo went out with a warning. The warning is here:
Please note - Report - Bluetooth with Enhanced Data Rate Software II for Windows 7 wipe main drive
There are updated drivers in the post. But they seem not to be for the T500 and on the download page T500 there is no new version of the drivers.
I talked to Lenovo support a couple of times but they say they only handle hw problems. They recommended removal of devices in Device Manager, uninstall reinstall etc. But after all posts of lost data I don't want to try to uninstall if I am not sure it will not corrupt my computer. I asked them if they could forward to their team to update drivers for the t500 but they seem not to have done that.
Right now I have no working bluetooth anymore.
We have hundreds of lenovo laptops in our offices and I really would like to know if we risk risk data loss if a user uninstalls bluetooth drivers. How could we upgrade them to remove this risk?
So my questions are:
Does anyone know what versions of the drivers are unsafe to uninstall and what versions are safe to uninstall?
How can you fix broken updates? Like on my T500. There is no new driver for it on it's download page?
What is the way to upgrade bluetooth on "unsafe" machines (where uninstallation of bluetooth would corrupt them)?

Hello and welcome,
The last post in a long thread on this topic links to a driver for the T500 among other machines. I haven't tried it myself.
OS wiped out during Bluetooth drivers update
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

Dv4-3106tx: Bluetooth driver installation problem

Hi and good day,
Im having a problem with my integrated bluetooth. Before this everything works well until recently I cannot discover bluetooth device, send/receive file. And I confidently, uninstall the bluetooth driver from device manager with intention to reinstall it back using the driver included in C: drive.
However, the problem is when Windows keep install the driver with built in driver that comes with windows. I thought, ooh ok nevermind, I'll just run the setup and it will overwrite and use the Ralink/Motorola bluetooth driver instead.
But that's not the end. When I run the setup, I got this dialog
and I select "Yes, restart the computer now" and click on finish. Then the computer restart and relaunch the setup and again I got this same message again..again and again and again.
So I'm pretty much stuck now. Right now the bluetooth is installed with built in windows driver being used. But I cannot discover, send/receive file whatsoever.
Any help is much appreciated.
Thanks in advance.
This question was solved.
View Solution.

Oh my gosh. I'm completely forgot this thread.
Actually I managed to solve the bluetooth problem by:
1. Getting the driver backup files from my friend. He's using same lappy with me. I asked him to backup the driver using Driver Magician software.
2. I run the driver magician software and do the restoration. Then it requires a restart. Restart the computer
3. Upon restart, I launched the bluetooth driver installation software and it manages to complete the installation without any problem.

GX630 bluetooth driver install problem

I got the GX630 a week ago.... I tried turning on the Bluetooth and it tried to install the device but it couldn't find a driver when I pointed to the CDrom driver disk. I read the manual and browsed the MSI driver download page for the GX630 and no bluetooth driver is listed. The manual says the bluetooth is in combo with the modem. Does this mean the modem driver is used? Thanks in advance.

Look here for bluetooth drivers: http://global.msi.eu/index.php?func=downloaddetail&type=driver&maincat_no=135&prod_no=1513

Logitech Bluetooth driver compatability problem with windows7?

I have a logitech wireless mouse that runs on a bluetooth on my laptop, which has been running ok, until recently, it keeps saying that the it didn't connect due to a missing drive. Have downloaded the most recent driver but it still won't run. Had
a look on the troubleshoot for the Bluetooth and it said that the LBTWiz is incompatible? Can anyone help?

Unfortunately your post is off topic here, in the TechNet Site Feedback forum, because it is not Feedback about the TechNet Website or Subscription. This is a standard response I’ve written up in advance to help many people (thousands, really.)
who post their question in this forum in error, but please don’t ignore it. The links I share below I’ve collected to help you get right where you need to go with your issue.
For technical issues with Microsoft products that you would run into as an
end user of those products, one great source of info and help is
http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums are also here:
http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
For Technical issues with Microsoft products that you might have as an
IT professional (like technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
http://social.technet.microsoft.com/forums/en-us, and search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the MSDN discussion forums at
http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
http://community.dynamics.com/
If you really think your issue is related to the subscription or the TechNet Website, and I screwed up, I apologize! Please repost your question to the discussion forum and include much more detail about your problem, that could include screenshots
of the issue (do not include subscription information or product keys in your screenshots!), and/or links to the problem you’re seeing.
If you really had no idea where to post this question but you still posted it here, you still shouldn’t have because we have a forum just for you! It’s called the Where is the forum for…? forum and it’s here:
http://social.msdn.microsoft.com/forums/en-us/whatforum/
Moving to off topic.
Thanks, Mike
MSDN and TechNet Subscriptions Support

HELP PLEASE!! Hard drive upgrade problem

Hi everyone. I under the direction of others bought an 60GB Powerbook Hard Drive 5400RPM HItachi upgrade from powerbookmedic.com. I bought my powerbook in early 2001 and when I took it apart and proceeded to load in the new hard drive I noticed that the new one did not have connector pins to hook up to the flex cable on the hard drive. Now am I am I missing something here or am I just a moron? I am really frustrated because the model I bought says that it fits with all Powerbook Titanium models. What am I missing? Help please!!!!!!!!!

Hi, Denny.
...and when I took it apart and proceeded to
load in the new hard drive I noticed that the new one
did not have connector pins to hook up to the flex
cable on the hard drive.
So you removed the old drive, you detached the short flex cable from it, and now you find nothing on the new drive to connect the cable to? Am I understanding correctly?
If so, is it possible that the connector on the new drive is covered with some sort of temporary shield to protect it during packing, shipping and handling? If it is, the shield should come off if you pull it in the same direction you pulled the flex cable to detach it from your old drive.
I'm tempted to say you are surely missing something. For Hitachi to have shipped a drive that has no cable connector seems about as likely as for Toyota to have shipped a car with no tires installed, but I suppose anything is (barely) possible.

Hard Drive upgrade problem (No applicable update data was found) system update v2.53

go here with full detailed and working steps:
http://www.problogbooster.com/2014/01/no-applicable-update-data-was-found-ps3.html

I tired it all , this what worked for me : FIRST turn ps3 in to safe mode:Step 1: With the PS3 on turn off the power by holding the power button on the front of the unit till the power light is red.
Step 2:
1. Touch and hold the Power button, you will hear the first beep, meaning the PLAYSTATION 3 is powering on.
2. Continue to hold the Power button and after about 5 seconds, you will hear a second beep, indicating the video reset.
3. Continue to hold the Power button and after about another 5 seconds you will hear a third beep and the system will power off.
Step 3:
1. Touch and hold the Power button, you will hear the first beep, again for the PS3 to power on.
2. Continue to hold the Power button and after about 5 seconds, you will hear a second beep for video reset.
3. Continue to hold the Power button and after about another 5 seconds you will hear a quick double beep. At that point release the Power button. If you succeeded in activating Safe Mode, you will see a message on the screen saying, "Connect the controller using a USB cable and then press the PS button."
4. Connect a USB cable to the controller and the PS3 and press the PS button to enter Safe Mode.
5. Then you will see the Safe Mode menu. Next : download ps3 update on playstion website , and put into usb stick: make sure its lile this : PS3/UPDATE/XXXXXXXX XXXXXXXXX is the file you downloaded, and ps3 and update need to be caps, after safe mode out usb for controller in first ONLY, do not put usb stick with update in yet, then after in safe mode go restore setting, this will take you back to the page where you need to put your ps3 controller on again, then it will ask you for update, THEN you put usb stick in, and folow on screen. i tired everything, this way it worked for me, safe mode then update, make sure usb is phat32 like always,

HT1364 when I moved the iTunes media folder from my PC to my external hard drive, upon iTunes start up with the harddrive connected beforehand, my music and all the files transferred to my harddrive but now all my playlists music& ratings are gone. what d

I transferred my itunes library using all the guided steps promepted on this topic, when I restarted iTunes in its new location on my xternal hard drive, iTunes did not have any of my ratings or playlists. I did have the hard drive running before i started up itunes as well. what can I do?

I got it to work!!!!!!!
what I did was after doing this( http://support.apple.com/kb/HT1364) moving my library and iTunes folders using that link, I held shift while double cicking and opening iTunes, It promted me to select a library, I went to my external hard drive and opened iTunes library.itl folder and selected the iTunes library.itl file. In the picture below I just selected the highlighted file and it opened itunes, THIS time with all my music and with all my music ratings and playlists, all still intact thank you so much!!!!

Bluetooth Driver for dell(Inspiron N5110(ST: 3v82np1 ) is still not working well.

Hi,
I have tried installing "Dell Wireless 1701
802.11 b/g/n, Bluetooth v3.0+HS Driver "
But I saw neither wireless nor Bluetooth was defined.
As the drivers listed below are only the driver for wireless and bluetooth, I almost tried all of them, except the last three.
File TitleImportanceRelease DateVersionActions
Intel Centrino Wireless-N 1030 WiFi Driver
(Driver)
Other Formats
Description
Intel 6230/N1030/N1000 WiFi Driver for win7 64-bit This package provides the driver for the Intel Centrino Wireless-N 1030 WiFi Driver and imore…
Intel Centrino Wireless-N 1030/Advanced-N 6230
Bluetooth Adapter Driver
(Driver)
Description
This package provides the Intel Centrino Wireless-N 1030/Advanced-N 6230 Bluetooth Adapter Driver and is supported on Inspiron N5110 and Vosmore…
Dell Wireless 1701 802.11 b/g/n, Bluetooth v3.0+HS
Driver
(Driver)
Description
This package provides the Dell Wireless 1701 802.11 b/g/n, Bluetooth v3.0+HS Driver and is supported on Inspiron N5110 and Vostro Notebook 3more…
Dell Wireless 1702 WiFi + Bluetooth Driver
(Driver)
s
Description
This package provides the Dell Wireless 1702 802.11 b/g/n, Bluetooth 3.0+HS Driver and is supported on Inspiron and Vostro Notebook models tmore…
Intel Centrino Wireless-N 1000, Centrino Advanced-N
6230, Centrino Wireless-N 1030, v.14.2.0.10, A01
(Driver)
Recommended
Description
This package provides the Intel Centrino Wireless-N 1000/1030, Advanced-N 6230 Driver and is supported on Inspiron N5110 and Vostro Notebook more…
Intel Centrino Advanced-N 6230/Wireless-N 1030
Bluetooth Adapter Driver
(Driver)
Description
This package provides the Intel Centrino Advanced-N 6230/Wireless-N 1030 Bluetooth Adapter Driver and is supported on Inspiron N5110 and Vosmore…
Add to My Download List
Dell Wireless WLAN 1502 Half Mini-Card Driver
(Driver)
Description
This package provides the driver for Dell Wireless WLAN 1502 Half Mini-Card and is supported on Inspiron Notebook and Vostro Notebook modelmore
Intel WiMax Link 6150 Driver
(Driver)
Description
This package provides the Intel WiMax Link 6150 Driver and is supported on Inspirion and XPS Notebook models that are running the following
Realtek RTL8111E-VB Gigabit and RTL8105E-VB 10/100
Ethernet Controller Driver
(Driver)
Description
This package provides the Realtek RTL8111E-VB Gigabit and RTL8105E-VB 10/100 Ethernet Controller Driver and is supported on Inspiron N5110 amore…
I had to install Dell Wireless 1702 WiFi +
Bluetooth Driver
The wireless adapter was defined by this driver, however, the Bluetooth still has an exclamation mark in front of it, and when the Dell WLAN and Bluetooth client installation finished, a pop up message said that Windows couldn't install the device
well, although there was a folder added in documents folder named 'Bluetooth Folder'
Yes, the Bluetooth was named with 'Generic Bluetooth adapter' before installing 'Driver above'. However, after installing the driver above, the Bluetooth adapter named with ' Dell wireless 1702 Bluetooth v3.0". But as you see it's
still not working will.
The sceen shot shows the device manger before installing Dell
Wireless 1702 WiFi + Bluetooth Driver
These screen shots shows the device manger after installing Dell
Wireless 1702 WiFi + Bluetooth Driver
I've lit windows detect the operating program for this device on the internet, it said "Windows has detected that the operating program of this device is up to date. As this screenshot shows.
What should I do because nothing lift to try? If you have a look at the ninth drivers in my previous message, you will see that no other drivers for Bluetooth lift.
Also, I have tried to install Intel
Centrino Wireless-N 1030 WiFi Driver
But I have been told that "the installation is blocked', This package of installation cannot be installed on your system' I don't know what this
means, is it because Dell Wireless 1702 WiFi +
Bluetooth Driver is being installed
Could you please take some of your preciout time out to read carefully my points below to finish this problem?
first:
Yes, if you had a look at my first post, you would have seen that I really have downloaded and installed the drivers suitable for bluetooth, which was only Dell
Wireless 1702 WiFi + Bluetooth Driver, which made the bluetooth recognized by Windows 7(64Bit). However, the bluetooth in the device manager still has an exclamation mark as it is shown in the device manager.
I don't have any other drviers which can do more than the what Dell
Wireless 1702 WiFi + Bluetooth Driver did because I have tried all the drivers listed under 'Network', exept the what are for Etherent.
Yes, when I have tried adding the bluetooth between two laptops(Mohammad and Nasreen). the bluetooth was added for both laptops as you see in these screenshots below:
The Bluetooth devices of Nasreen's laptop whose bluetooth is having some problems in Device mangage.
The Bluetooth devices of Mohammad's laptop whosse Bluetooh is defined well in device manager.
But there is still problem in the device managre as shown in the screenshot listed before.
Second: (Important) That when I want to send files or recieving between two bluetooth added in either laptop, I could send them. Also, when I open the Mohammad's bluetooth added in Nansreen's laptop( screenshot
below), I can show what is inside it.
However, when I open the the Nasreen's bluetooth addd in Mohammad's laptop, I noticed no reponse at all because as you see that disconnected is written in fornt "Nasreen-Pc" as this screenshot:
Although sometimes Nasreen-Pc gets connected as screenshot below, but I am still not able to open the Bluetooth folder of Nasreen-pc from Mohammad-pc. When trying to do that, no response is there.
In other times, Nasreen-pc gets connected for a while, but it comes back disconnected.
Third:: I noticed that the name of Laptop whose Bluetooth was added listed in 'My computer' for the laptop whose Bluetooth is having some problems in the device manager.(First Screen shot below) However,
the name of the laptop whose Bluetooth is having problems wasn't listed on other laptop's "my computer"(Second Screen shot below)
Finally: : when I clicked "right-click" on "Nasreen-PC" and then clicking on "detecting and troublshooting issues", I found that windows informed me that :
But which driver should I reinstall because I have already installed the Dell
Wireless 1702 WiFi + Bluetooth Driver almost twice?
A man should convert his anger and sadness into strength to continue living in this life.

Certain driver packages contain drivers from some of the essential services only and for additional services, separate drivers must be installed. Additionally, the service is installed only if a compatible device is installed (or paired).
Therefore, you are seeing the error.
If you are using the Bluetooth L2CAP Interface and Bluetooth Remote Control services and not able to install the services, you can try unpairing the device, restart the PC, pair the device and then check. If that too fails, you need to install a suitable
driver, sometimes even other OEM drivers solve the issue. You can Bing/Google about this. You can also contact Dell Support for more information.
Balaji Kundalam
Thanks a lot,
I really didn't understand what you mean with in your first part the service is installed only if a compatible device is installed (or paired).
The Bluetooth is integrated with
the laptop, then where other services will come from, all service are related to Bluetooth.
If there are some additional services not related to Bluetooth,
then how can I either let them functioning well or disable them in order to get rid of the yellow exclamation mark
on the name of my laptop in the Device and printers.
Also, I really have installed a
BCBT7(Broadcom Bluetooth) for HP which really defined the same Bluetooth issue,
Device manager after installing the entire setup of driver BCBT7(Broadcom Bluetooth) on HP laptop
but when trying to install the same
BCBT7(Broadcom Bluetooth) on Dell, I faced the error below, although there is an icon for Bluetooth in
the system tray. Also, the Bluetooth is integrated as
you have seen in the device manager.
You didn't answer me: Third:: I noticed that the name of Laptop whose Bluetooth was added listed in 'My computer' for the laptop whose
Bluetooth is having some problems in the device manager.(First Screen shot below) However, the name of the laptop whose Bluetooth is having problems wasn't listed on other laptop's "my computer"(Second Screen shot below)
A man should convert his anger and sadness into strength to continue living in this life.

Re: Can't reinstall windows 7 bluetooth driver

I have a new Portege T210 laptop. Bluetooth was working and then stopped, saying it wasn't enabled when it was. I am using the in built bluetooth.
I did a System restore and now when I turn on bluetooth, windows 7 home premium prompts me to install the bluetooth driver. However when it starts the progress bar it stops a little way in, and just stays there saying please wait.
I have tried several times, including rebooting machine.Thelongest I have waited is more than one hour, it just sits there saying it is installing the driver.
Anyone have any suggestions?
I really don't want to do a system recovery.

I appreciate the input but I have already doen two system restores for other reasons. I have too much setup now to go back to square one. Windows 7 is causing me no end of problems. I can't install any anti virus sftware except Windows Security Essentials, email pop 3 software doesn't work and peer to peer software (VUZE) doesn't work either. All the programmes can't contact the server, Win 7 seems to be blocking everything except its own programmes. Email programmes I tried are Thunderbird, Eudora, Outlook and the Win 7 one.
This machine is starting to look like a lemon.
A system recover seems ridiculous, the machine is 2 weeks old and the shop where I bought it alrady did a system restore back to their OS installation point, then Norton didn't work at all and I can't uninstall it. I have always found Norton to be hopeless and would never install their software. That may be the problem I guess.

Epson Perfection 1250 stopped working after 2.65A driver upgrade

i have the above scanner. it was working with a driver i downloaded from Epson a couple of years ago. I went to the epson site and saw a newer driver was there, this is 2.65a epson scan and TWAIN driver. i downloaded it and installed it and now the scan application quits after 5 seconds. no msg nothing. i have 10.2.8 which the doc says is supported by this driver. i repaired disk permissions still no luck. the apple profiler sees the scanner on the usb port, and it makes a noise when the system is booted (i guess to show it's there) so since there are no error msgs i don't have a clue what's wrong. anybody had this problem. i'm going to try to find the old driver again, but right now no scanner :(( why do i try to be up to date, if it ain't broke don't fix it.

this was resolved by epson. apparently their driver upgrade did not automatically remove the previous version and you have to manually do that (they walked me throughte files that needed to be deleted). once i did that the new driver installed and worked fine.

Intel Bluetooth Driver Causing Spontaneous Reboot While Using ThinInstaller

I have had this issue since we got our new T440p's and X240's. I have our driver repository all set up and during my SCCM task sequence I have the Lenovo drivers and software installed using ThinInstaller.
During the second round of running ThinInstaller, the Bluetooth driver is installed. After the Bluetooth driver is installed ThinInstaller continues installing other packages then the system spontaneously reboots. I had this issue happen intermittently with the T440p's, but happens every time with the X240's.
My "solution" was to disable the Bluetooth driver in the repository database. I have not experienced the reboot issue after doing this, however, now the Bluetooth driver is not getting installed.
The driver (giww10ww) is not included in the SCCM admin package and apparently cannot be installed by simply using a standard driver .inf, therefore, I cannot pre-stage the driver.
My only other idea is to modify the .xml file so I can schedule the installation after all the other packages, maybe on a third pass. However, I am not sure how to do this, nor do I think I would like to maintain custom modifications throughout new version releases.
Am I the only one experiencing this?
Systems: T440p (20AN), X240 (20AL)
Deployed OS: Windows 7 SP1 X64
Driver: Intel Bluetooth Device Software - Initial Install - 7 [64], v.17.0.1401.418 (giww10ww)

I have done research on your   20AL and 20AN from a SYSTEM Update packages viewpoint. Both machines use the same SU packages for your bluetooth type.
https://download.lenovo.com/catalog//20AL_Win7.xml
https://download.lenovo.com/catalog//20AN_Win7.xml
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/giww10ww_764_u_2_.xml
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/giww10ww_764_i_2_.xml
If initial install of giww10, reboot type=3  requires reboot
If upgrade install giww10, reboot type=1  Forces a reboot
The SU package logic is reflecting what the msi.exec will do, after far as reboot type=.
Strange:
SU calls this version                                   17.0.1401.418 in their package wrapper. as does update retriever.
The download support site states version 17.0.1401.0428 package wrapper.
- 17.0.1401.422   (Driver) < all packages will install this driver version.
It appears upgrade=force reboot, initial install=requires reboot. Are all your 240's ALWAYS getting bluetooth upgrades of the driver? .
Someone else will have to explain if there is a workaround for the force reboot, or better sequence to the install.
==
During your second run of thin installer, are you certain that the bluetooth install is FORCING a reboot, or could it be another software install Forcing the reboot?
You stated earlier possibly modifying the thin installer .xml. Did you mean modify the .xml in the repository, which is probably built using update retriever. I stated earlier dont modify the .xml. Reason is: the reboot code is used by TI to anticipate what msi.exe will do. If the intel driver install says force reboot, you will get a force reboot. ie,changing the .xml will not change much.
Workaround?: Depending how you populate each machine, lets say image copy. Have the bluebooth driver uninstalled on the master image.
===
Is there a new release of the Bluetooth Driver without a force reboot?
Mvw
The driver is from INTEL. Lenovo has no control of the reboot type= in the msi.exe.

Lenovo G400 Bluetooth Driver infected with Virus

i am using a lenovo G400 notebook since last 4 months and wasn't able to install the bluetooth driver.
recently i formatted my laptop and downloaded the driver for fresh installation.
The driver got installed but the bluetooth wasn't working and it was reporting "device not found"
then i updated my Antivirus from net, NOD32 antivirus and it reported that the bluetooth driver contains a trojan.
i checked the downloaded installation file and it too had trojan.
here is the repost of threat generated
"Time    Module    Object    Name    Threat    Action    User    Information
2/9/2008 21:32:28 PM    AMON    file    C:\WINDOWS\system32\BtWizard.dll    probably a variant of Win32/Genetik trojan    quarantined - deleted    NT AUTHORITY\SYSTEM    Event occurred on a file modified by the application: C:\WINDOWS\system32\msiexec.exe. The file was moved to quarantine. You may close this window.
Time    Module    Object    Name    Threat    Action    User    Information
2/9/2008 21:27:52 PM    AMON    file    C:\Program Files\Lenovo\Bluetooth Software\BTTray.exe    probably a variant of Win32/Genetik trojan    quarantined - deleted    NT AUTHORITY\SYSTEM    Event occurred on a file modified by the application: C:\WINDOWS\system32\msiexec.exe. The file was moved to quarantine. You may close this window.
please help me with this problem
and if anyone is having similar problem please report.
Regards
Tarun
[email protected]

i find other AV to be ineffective..
and NOD32 is a famous av..
also few more logs
Time    Module    Object    Name    Threat    Action    User    Information
2/3/2008 14:33:10 PM    Kernel    file    C:\Program Files\Intel\Wireless\Bin\EvtEng.exe    probably a variant of Win32/Genetik trojan
2/3/2008 14:33:01 PM    Kernel    file    C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe    probably a variant of Win32/Genetik trojan
2/3/2008 14:32:27 PM    Kernel    file    c:\program files\intel\wireless\bin\s24evmon.exe    probably a variant of Win32/Genetik trojan
2/3/2008 14:32:16 PM    Kernel    file    c:\program files\intel\wireless\bin\evteng.exe    probably a variant of Win32/Genetik trojan
its of wireless drivers..

Bluetooth Driver Bootcamp Issue

I have a 2011 Macbook Pro with Windows 7 Ultimate installed. Until recently I have had no problems using my might mouse through bluetooth in Windows 7. Today I booted into Windows and the mouse no longer works. I messed around with it for awhile and eventually I went to device manager and realized my bluetooth adapter wasn't even showing up. Bluetooth and mighty mouse still works fine back in Mac OS. I unistalled bootcamp from my Windows 7 and reinstalled all of the drivers. Still having the same issue. Any suggestions?

I also got the same problem. No Bluetooth adapter in the device manager.
I also tried to install the driver via the old Hardware wizard:
1. Starting C:/Windows/System32/hdwwiz.exe
2. "Install the hardware that I &manually select from a list (Advanced)"
3. "Show All Devices" - Next
4. Wait a second for windows to load all the drivers
5. Under Manufacturer, select "Apple Inc." and under Model, "Apple Bluetooth Driver"
6. Message showing up:
"The software for this device is now installed, but may not work correctly.
This device cannot start. (Code 10)"
Now the Apple Bluetooth Adapter shows up in the device manager under "System devices" but with the status: "This device cannot start. (Code 10)".
After that, I also tried to restart. Nothing changed.
I also tried to install the Bluetooth Driver from the OSX Windows driver disk. Installed without problems but didn't solve the problem.
Windows 7 64bit - up to date
Bootcamp 3.3
Macbook bought 2009
Model Nr. A1181
Really looking forward for a solution on this problem.
Regards
EDIT:
A while back, my Bluetooth worked on windows. I used it to transfer files from my old phone to my macbook.
EDIT2:
On Mac the Bluetooth adapter works flawless.

Bluetooth Driver In Windows 8.1 is Not Working [Model Pavilion 15 E007TU]

Sir Where is Th Bluetooth Driver for Windows 8.1 for the Laptop of Model Pavilion g6 pavilion 1318ax
In Windows 8.1 Bluetooth Not Working

Hi @iamvinod34 ,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion g6-1318ax Notebook and needing help with Bluetooth. Here is a link to fixing Bluetooth issues.
If that does not help try looking at the section in this document Labeled: Make sure that wireless communication is turned on. Sometimes just turning on and off the Bluetooth helps.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system. If an updated is needed this could cause this issue.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Help Regarding Hard Drive Upgrade (Method, Model, Raid)

Hello,
I have a W520 with two 500GB drives in stripped RAID configuration. One of the two drives has been making a crunching noise, followed by a beep.
I called tech support, and it was not very helpful. I have the next business day at your door warranty, and they are sending me a new hard drive to install myself, in about 5 business days (not sure how this is, given the warranty I've had, and never used until now...).
In any event, my drives are nearly full, and if I'm going to go through the trouble of changing one anyway, I'd rather just replace them both with larger drives.
My goal is to have the largest drives possible, and do the upgrade as easily as possible. I don't really care if RAID is in effect or not, as I don't feel I've noticed any real performence increase anyway.
I have in the past upgraded Thinkpad drives to larger drives, but these were in single drive systems. I'm "handy" with computers, in a do it yourself kind of way, but really just an amateur with this stuff. I'm concered about the dual drive aspect and the RAID aspect with this one. The tech support guy said they have no information to share about how to do a drive upgrade, that they just ship the drive (which I'm probably not going to use now anyway).
So these are my questions, and thanks to anyone who takes the time to share any advice...
1) What is the best, largest compatible replacement drives to get? I don't care about speed of the drive as much as size.
2) What is the best way to copy off/clone/mirror the existing content on my existing drives? I bought a device off Amazon to do this a few times - one of the times, the device literally started smoking... I'm not sure where I put the last one I used (where you connect to the new, bare drive).
3) Can I just disable RAID in the bios once I've copied the old drives to the new drives (or to an external backp-up drive)? If it is easier to just disable it and have two separate drives on my system, I'm fine with that.
Again, thanks for any help with this.
Jason

Hi, Denny.
...and when I took it apart and proceeded to
load in the new hard drive I noticed that the new one
did not have connector pins to hook up to the flex
cable on the hard drive.
So you removed the old drive, you detached the short flex cable from it, and now you find nothing on the new drive to connect the cable to? Am I understanding correctly?
If so, is it possible that the connector on the new drive is covered with some sort of temporary shield to protect it during packing, shipping and handling? If it is, the shield should come off if you pull it in the same direction you pulled the flex cable to detach it from your old drive.
I'm tempted to say you are surely missing something. For Hitachi to have shipped a drive that has no cable connector seems about as likely as for Toyota to have shipped a car with no tires installed, but I suppose anything is (barely) possible.

T500 Bluetooth driver upgrade problem, risk of wiping the harddrive

Similar Messages

Maybe you are looking for