T500 External Monitors

I have a T500 Think Pad. I have two Lenovo external LCD monitors. I have connected one via the blue VGA port into a Lenovo docking station. I have connected the other one with the DVI cable and a converter to a Lenovo Display Port to single Link DVI-D Monitor cable directly into the Think Pads port not the docking station as it doesnt have one. How do I get the two monitors to function with the Think Pad as only one is functioning which is the VGA port linked monitor. Any help would be appreciated.

Per tabook, 2242 is Intel only model.
Hope this helps to help you guys to assist the OP.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Similar Messages

Docked T500 External Monitor cannot switch to Primary

I am attempting to make my external monitor my primary monitor when docked.
The Windows options are greyed out and when I run presentation director I get error messages saying refresh rates and resolutions are incompatible. I know these are valid settings.

You are not going to get any answers unless you specify op sys, what graphics cards, what graphics settings in bios, and if Vista switchable graphics what switchable graphics settings in power manager.
T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.

1680 x1050 external monitor on T500 does not work

Dear all, I have a T500 running XP professional and a Philips external monitor 220BW8plus, but when I set the screen resolution to the screen's native resolution my screen gets compressed with 2 black areas on the side. I've tried everything I could think of, but nothing worked. Now I'm forced to work at 1400 by 1050.
Does anyone know how to solve this?
Thanks for any suggestions.
Cheers,
Erik
Solved!
Go to Solution.

Thanks for that suggestion, but I've tried that and as soon as I apply that change, the screen gets compressed with big black bars on the side.
It doesn't matter if I switch to single display, dual clone, dual extended, without or with docking station. I've updated to the latest software drivers etc, etc.
Is it a problem of the T500 with this brand and type of screen (Philips 220BW8CS1/00)?
Even our IT department is not able to solve the problem. They suggest I'd buy a different screen

T500 XP 32 - 2 external monitors - one in VGA-out & one in DisplayPort ? (1920x1080 & 1280x1024)

I searched and found some information... but the information wasn't specifically clear, so better to find out for sure, and help archive some clear information for the community...
I'm looking at attaching 2 external LCD monitors to my T500 (2082-3HU). OS is XP 32bit.
One will be a 19" 1280x1024,    and the other will be a 27" 1920x1080.
Plan is to connect 1 to the VGA-out and 1 to the DisplayPort.
First.. will this work?
Second.. which is better to attach to which port? (and why?
and
Third.. what are the maximum resolutions that the VGA and DIsplayport ports can provide?   Does it matter if it's VGA or DVI?
I was going to get a USB to video adapter for $50+, and then remembered the DisplayPort!    If it will work, it's a great way to save some money, get much better video res. and speed, and keep a USB port free.

Here are two posts I found ... (they appeared out of no-where)
you can connect two external WUXGA (1920x1200) monitors to the T500 using both the VGA and displayport connectors.   no other hardware is needed besides the display cables.
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/Can-I-connect-Dual-External-screens-to-T500...
I connected 2 external monitors (1 thru Displayport , 1 thru VGA port ), and it works fine, its very easy to configure it using Lenovo Presentation utility.
But now I have the view only on those 2 external monitors (notebook display is off)
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T500-with-2-more-displays-thru-Displayport-...
and for any more monitors, a USB-VGA, or USB-DVI adapter can be used... from lenovo, or EVGA or any other good type.
DisplayPort can support, at least, 2500x1600
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/Can-T410-w-built-in-Graphics-support-the-De...
use a Lenovo usb2dvi converter and the displayport to dvi converter.
This will allow you to use 2 external WUXGA monitor. If you need to support more WUXGA monitors, then you just need to get more Lenovo usb2dvi converter, up to a maximum of 6 (maybe slightly less i can't remember) using the integrated gpu.
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T500-DisplayPort-to-Dual-Link-DVI-Adapter/t...

HELP : T500, External LCD monitor problems, after upgrading GMA4500MHD display driver!

I have upgraded my display driver for GMA 4500MHD from version 7.15.10 to version 8.15.10.1968 (Vista 32bit).
After the installation and rebooting of the T500, my brand new Samsung SyncMaster2233BW cannot show correct display image.
Only image I can see is white screen with few blue shapes. I'm using VGA output for connection. I have tested the monitor by connecting to my other laptop (Dell D620) and everything works fine.
Can somebody help with this strange problem? How can I make my external monitor work again with
T500? Is it possible to find and download display driver version 7.15.10.xxxx somewhere and revert back?
T500 configuration: 15", 3GBRAM, 320GB HDD, Vista 32bit (Home Premium, SP2)
HELP, HELP, HELP

Hi sehu,
Can't you just ask Windows to roll back to previous installed driver? Additionally, have you tried going back to the point where previous version of driver was installed through Windows System restore?
Also check in c:\swtools\drivers\video folder to see whether or not the desired driver resides there.
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

T500 with External Monitor Seems to Be in 8 bit Color

I got a T500 for work running Windows 7 x64. I hooked up the computer to an external monitor via the VGA port (I've connected directly to the laptop and also through the Thinkpad dock).
Despite my best efforts the external monitor seems to render in 8 bit color mode (or maybe 16 but definitely not 32 bit). You can tell by lack of color in the gradients. Things I've tried.
Updating the video drivers
Using the IBM monitor tool to set it to 32 bit
Setting it to 32 bit in the Windows settings

Just to close the loop on this, I've determined that the cause of my issue is the Intel Dynamic Platform and Thermal Framework software/driver. I've disabled in the BIOS for now, and the machine is working very well. Will look for an update from Lenovo to address more definitively.

T500 Closing Laptop Lid but no External Monitor Output

Hello everyone. I have a Lenovo T500 (WInXP) with an external monitor. I usually just want to use that external monitor and not the one for my laptop. However, every time I close the lid, the output to the monitor disappears a few seconds later. I've used google and searched this forum and found something similar, change the power settings. I changed it so it would "Do nothing" when the lid is closed. However, this does nothing and doesn't help me.
Is there a registry I have ti change?
Related links I've look at and tried
From Knowledge Base:
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/Configuring-a-ThinkPad-T500-to-run-with-the...
Another person
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T500-goes-to-sleep-with-lid-closed/td-p/307...
T500 2081 CTO ~ T9600 2.8GHz ~ WXP Pro 32bit ~ WSXGA+ 15.4 LED ~ATI 3650 ~ 4GB DDR3 RAM ~ 500GB WD 7200rpm
Camera ~ AT&T WWAN ~ CD/DVD Combo Drive ~ Intel WiFi 5300 AGN

I didn't see if your connected to power? there are different settings for both power and battery.
There are also bios settings for the display, since I am using my T500 now with an external LCD I have it set to external display or something like that. Its worth a shot.
BIOS>>CONFIG>DISPLAY read the output options.
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

External monitor (t60p)

When attaching an external monitor all I get is is a flickoring image of what it should have been. Is it the external port or does anybody have the same problem? It used to work, and I can't remember the excact circumstances when it stopped working - at first I thought it was a friver issue.
Thanks
Config:
Bios 2.22-1.07
Windows XP SP3
CPU: Intel Duo 2.16
harddrive 80Gn
GPU: ATI v5250
Message Edited by Brandrup on 10-06-2008 09:50 PM

I don't own this unit, nor do I use this software, but the first thing I would do is see if I can get the computer to display on an external monitor. If it does, then you can be pretty sure the problem is software, if it doesn't, they you may have a hardware or driver issue.
That's probably not much help, but hopefully someone that owns one will have more to offer..
ps. if there are more then one graphics adapters on these, please specify which you own.
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

How do i get the slideshow to display on my external monitor in extended view with powerpoint?

i have my T500 (windows 7) connected to a large external monitor with extended view. when i run powerpoint it displays the slideshow on my laptap screen instead of the external view. how can i have the presenter view show on my laptop, and the slideshow show on the external monitor/projector?
thanks!

You can do it that way, (Clone) but everything you do on your laptop will also be displayed on the monitor.
Assuming you would like the display on the external and freedom to navigate on your laptop without broadcasting, you would need to adjust your slide show settings in PowerPoint.
To use this procedure:
In PowerPoint, On the Slide Show menu, click Set Up Show.
Under Multiple monitors > Display slide show on drop down menu: select the monitor you want the slide show to appear on.

T400- make the external monitor primary problem.

I use T400 and Acer p223w monitor.
From some reason I cannot make the external monitor to be the primary monitor.
Using the Presentation Doctor I have the option to define the external monitor as the primary but when I test it, it says that I have illegal parameters of color depth and resolution.
The problem is that the parameters I use are the parameters currently defined on the two monitors (which mean the monitors have no problem working that way).
Any other color depth resolution combination won’t solve the problem.
On the other hand using the same parameters if I configure the laptop monitor to be the primary everything works just fine.
Any idea what causing it and how to solve it will be highly appreciated.

Since I have a German Windows client I can only guess the wording on the english client, but try the following, which worked on my T500:
Bring up the mobility center by pressing Win+X
Click the button to connect an external monitor
Choose to use the external monitor as the only display
Now that the external monitor is the only display, it is also primary of course. Now you can use the normal windows display dialog (Right-Click on desktop -> Configure -> Display) to extend the desktop to the internal display which will be secondary then
done
In my case windows remembers this configuration and you do not have to do these steps again after reboot or when you reconnect the external monitor.
Hope this helps for the T400, too.
Message Edited by pfahsel on 03-18-2009 02:18 AM

Windows 7 dvi external monitor

Hey,
I have a Lenovo T500 (ATI Mobility HD 3650 graphics) which I recently updated to Windows 7. I have been using it on an external monitor connected through a dvi cable. However, today I updated my drivers and bios, and now the laptop no longer even detects the monitor. What can I do to remedy this situation. Any and all advice is greatly appreciated.

I thought it was supposed to support 4 LCD's, including its own, but mine tells me it can't run more than two. What do I need to change to get it to run another LCD? Mine has the NVIDIA Quadro NVS 4200M adaptor. In the NVIDIA control panel, it shows me the three monitors (x2 24" LCDs and the T520's own display), with the two big ones checked. If I try to put a check mark beside a third monitor, a popup window opens, which says, "This GPU supports up to two displays."
If I connect using displayport would that matter? Hopefully not, because both of my external monitors only have VGA and DVI-D.
I don't care what display it uses on startup, as long as it gets to use all three displays once Windows is up and running. I'm not sure from your comment whether you meant it will never use both DVI monitors with the internal LCD, or just that it will not use them during startup.
Thanks for taking the time to discuss this with me. It is very helpful.

T500 Dual Monitors w/ Laptop Screen

I have a T500 (w/ ATI Radeon Mobility HD 3650) and a ThinkPad Advanced Mini-Dock. I currently use two external monitors, one out of each of the dock's ports (DVI and VGA). Is it possible to also utilize the laptop screen for a total of three screens? If so, how do I set that up. I can't get more than two to come on at a time.
Thanks
Solved!
Go to Solution.

I have the same thing, but can't get two monitors to work. I have ATI and have high performance on graphics. I have 2504 Advanced.... I can't use any dvi + vga or dp. I also can't use dvi on dock and dp on t500. i've tried all combinations on dock and t500, but can't find anyway to get two external monitors displays using dvi, vga, or dp. I would appreciate any help.
I would be happy just to have two screens. I did disable the internal lcd and when I am in ATI Advance I can right click the two disabled monitors ( the lcd and my second external), but ATI only give me options to add the lcd, I can't get any options to right click on the second external monitor - no matter how it is connected on dock or t500 - dp or vga.
Thanks for any help.

Can T43 drive 2 *external* monitors?

Hi folks -- this is my first posting and I didn't see this exact question asked before so I thought I'd try the experts! I have an IBM ThinkPad T43, model 1871-4CU, with Mobile Intel 915GM/GMS, 910GML Express Chipset Family (according to the Device Manager). I also have a docking station P/N 74P6734. I'm trying to run two external monitors instead of using the laptop's display and a single external monitor, but my system doesn't seem to support this. I can certainly run the display and a single external monitor (off the VGA port on the dock) with no problem, but when if I close the laptop and try to run two external monitors, the Display Settings control panel doesn't seem to recognize the second monitor (run off the DVI port on the dock). The Intel GMA Driver for Mobile control panel also doesn't recognize that a second monitor is attached. I know the second monitor and the DVI cable are fine because if I remove the VGA monitor the DVI one works just fine. My hunch is that since the laptop itself only has a VGA port on it and no DVI, that by design it can only support one external monitor at a time and not two. I was hoping, though, that since the dock has both ports that I'd be able to to drive two external monitors (again, just two external monitors, not those two plus the laptop's display for a total of three). Am I correct in thinking I can't get around this or maybe there's something I'm overlooking -- like a driver update -- that would allow me to drive two external monitors? Thanks in advance for your help here!
Solved!
Go to Solution.

The reason your T41 works with DVI is it has the ATI 7500 discrete graphics. The original poster had a T43 with the Intel integrated graphics which did not support DVI.
I don't have my T42 with the ATI card with me so I cannot check using it on my 1680x1050 DVI monitor but I know I have used it with an external VGA 1440x900 monitor.
Did you upgrade to the latest driver?
See also here.
Message Edited by zilla on 2009-05-15 02:05 PM
T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.

Mini Displayport to vga adapter on MacBook pro 13" late 2011. No signal on external monitor

Hi
Connecting a Late 2011 MacBook Pro 13" to an external monitor, trough mini Dispalyport to vga adapter, i see "no signal" messagge on external monitor, even if i get it as secondary monitor on Preferences > Monitor of my MacBook it's visible (i can change resolution, position, clone screen, ecc.).
Any suggestion? somebody found the same problem?

Hi
i did what you said and tried with other resolution/refresh rate combinations, also with anoter external monitor (and vga cable) but its still the same: monitor is detected but there's no signal.
Now I will try to chek if the adapter works on other pc and monitor.
Thanks
(anyway it was the firs time i connect this mac to an external monitor)

New External Monitor for Logic on MacBook Pro - Suggestions

I'm in the painful process of updating my studio and now my large screen external monitor has started failing.
I know if this a pretty general question more suited to the MacBook Pro forum but I'd like some input from folks used to working with an application like Logic in a home studio environment.
I guess the issue for me is that I'm not getting any younger and my eyesight isn't what it used to be. One of the things specific to Logic and music software in general is that there are LOTS of very detailed dialog boxes with text that is not always height adjustable (yes I know about zooming and indeed I do lots of that but it gets quite distracting). The other factor is that I'm often recording and engineering myself which means I'll be sitting with a guitar in my lap or at a keyboard and can't always lean in too close to the monitor.
I solved this by buying a large 26" Acer which sits on my desk behind the Mackie MCU. To my left I've got the MacBook 15.4" Pro on a keyboard stand above my MIDI controller at a 45 degree angle to the desk.
It's worked quite well until the Acer seems to have become haunted. It will mysteriously reboot itself intermittently, going blank for a second, then showing the Acer logo and going back to picture. It will also turn itself on spontaneously when the computer is off (the status light is off and then turns itself on). It seems to detect when I'm in the middle of a really good session and starts resetting itself every 30 seconds or so. Then it will work fine sometimes for days or weeks at a time. I've checked it on 4 different computers, it malfunctions on all. I believe in may be a problem with one of the capacitors or the inverter, I'm not sure, but it's driving CRAZY at this point.
And of course now it's 3 months out of warranty and may be more expensive to fix than buying a new one.
So my issue is what monitor to replace it with. I've considered buying an Apple monitor, since the display is lovely to look at but there are a couple things that are deal breakers.
It's expensive. Very expensive.
Oddly you have to choose between a 24" and a 30", with nothing in between. Don't want to sound like Goldilocks here, but the 24 is tooooo small and the 30 is tooooo big.
Yeah I know bigger is usually better but since they bumped the native resolution of the 30" up to 2560x1600 it's really sharp but things like the menu text get really quite small. Yes you can reset to a lower non native resolution, but then you loose the sharpness. I tested Logic in the store on the 30" and it did look great but I found I actually had to move my whole body around to see things at the top and bottom of the screen.
Oh and did I mention that it's expensive? Jeez.
The 24" now seems to look a bit small to me after using the same resolution (1920x1200) on the Acer's 26" screen. (Ok, I think it's actually 25.5 but hey that half an inch can make a big difference and I will avoid making any bad jokes here).
And did I mention the Apple monitors are expensive? The 24" is almost 3 times as expensive as a cheaper alternative.
I also still have a PC here that I use (sorry) and the Apple monitors have very limited connectivity. So I think unfortunately the Apple monitors are out for me.
So I;m down to a couple other non Apple options. I will not buy an Acer again since I believe now that their quality control is not good and their support is absolutely atrocious. Shame I used to be a big fan of Acer PC's, but after owning a couple I'm steering clear.
My biggest issue right now is that most of the new budget monitors are geared toward 1080p HD uses so they are they are maxing out at 1920x1080 (16:9 aspect ratio instead of 1920x1200's 16:10). So the tradeoff here is that HD movies will look better in 16:9, but 16:10 gives you "squarer" pixels and more vertical resolution for screen hungry apps like Logic.
Any opinions on this? I'm a bit new to the Mac so I don't know if I'm really better off going with a 1920x1200 screen like the Apple monitors.
Also, I know this may just be a bug in the Acer's scaling, but if I switch to 1920x1080, I lose the menus off the top of the screen or if I adjust the vpos I lose the dock at the bottom. Downscaling to 1600x1050 or even 1024x768 works fine. If I get a 1080 screen and set the resolution appropriately will it work correctly and without too much distortion?
I'm also curious what is the best way to hook up the monitor? I'm currently using the DVI to VGA adapter that came with the MacBook. My Pro is the slighter older silver keyboard model so it has the standard DVI out. Will I see any real improvement by going over to using DVI directly?
Also I'm wondering how people feel about glossy vs matte for music. My current displays are the non-glossy and I do think I prefer them for detail work.
The candidates right now are
Hanns-G HH-281HPB 28" @300$. It's one of the only budget monitors that uses 1920x1200. All the right inputs (DVI, VGA). I'm just afraid this might be a bit too good to be true. It's really cheap and after having problems with a "cheap" Acer (although it wasn't so cheap 3 years ago!) I don't want similar problems. Stand has no swivel or tilt (a big problem for my use). Also that resolution on such a big screen might be good for me or it might look grainy I don't know I haven't seen it. Anybody have any experience with these?
Samsung P2770H 27" @339 Looks nice, good color. Sadly only 1080 native resolution. Stand doesn't swivel, but does tilt. No VGA input, so won't work with my old PC (although strangely it says it comes with a VGA cable). They get generally good reviews and I know Samsung makes very good flat panel TV's.
ViewSonic X Series VX2739WM 27" @350. Once again maxes out at 1080. It's fast (1ms), has VGA input. I've never been a big fan of ViewSonic but they do seem to have gotten better color-wise. Tilt no swivel and it's anti-glare (not sure this is a plus).
There are also similar options from HP, Asus, LG and Sceptre but they are all 1080. In fact outside of the Apples, the Hanns-G and a few expensive monitors from NEC they all seem to be 1080. So if I really want the 1200 the Hanns-G seems like the only way to go.
Any input here would be greatly appreciated.

No doubt, the Apple displays are gorgeous. The first time I saw the 30" display wow, I wanted one BAD and it's actually what prompted me to buy a "big" monitor. The colors are great with a rich wonderful saturation level and as usual for Apple the form factor design is stunning. You know for that picture quality I could even get over the sticker shock and save up for one.
Which is why I was so disappointed when I actually sat down in the store and started to use Logic on one. I imagine for doing video work, graphic design or darn near anything else, it would be great. But for Logic I just found myself bending and twisting trying to look at toolbar at the bottom and then up to look at the menus. And instrument or plugin displays that were hard coded to look OK at lower resolutions looked really, really tiny to me. For me and particularly using Logic having 2 slightly smaller displays at a 45 degree angle makes more sense.
And once again the 24 seems just a bit small. I don't understand why they have a 27" iMac but you can't buy a 27" display. So iMac 27" starting at 1699, subtract out the cost of the CPU and drive ie the Mini and I'd really buy one. Strangely you can buy a 21.5" or a 27" iMac. Or you can buy a 24" or 30" display. Hmmmm.
So don't get me wrong I'm not bashing Apple for being expensive. They put a lot of money into R&D and into really thinking about the form and the function of their products. As a recent convert from being a PC developer for 25+ years, hey I've more than sipped the Kool-Aid here, I've guzzled it. They make great products and yeah they're more expensive, because they ARE better! I've now got 2 MBP's, 2 iPods, I'm about to get an iPhone (silly "death grip" or not) and I really want an iPad. Heck I'd really love an 8 core MacPro if I could afford one (alas I can't).
I guess my only gripe here is that there always seems to be a little less choice in the Apple world. Yeah, I know they do a lot less volume than the PC clone world I just think that they always seem to have a big gap between the high end and low end with not enough in between. So you can choose between the lower end and one piece units with no expansion boards (the mini or the iMac) or go straight to monster tower MacPro (way over 3K with display). You can get a MacBook but then you have to put up with a small screen or go with MacBook Pro, which let's face it is a lot of computing power for someone who just wants to web surf and write some email without squinting.
So here I am stuck in the middle. I don't want to buy a HannspreeQG or another piece of junk that's going to last 3 years and 3 months because of a crappy $2 capacitor that no seems to able to fix or care about fixing. I'd like to buy a really nice Apple monitor, I just want a big monitor, not a huge one and not a "medium" one (I know I'm spoiled but 24" seems "medium" these days).
Sorry about the rant here but my monitor is shutting down every 30 seconds and I'm about to go completely insane and toss it out the window!!!
Really glad to hear about that 84' VGA cable. I never imagined such a thing existed or would work without some sort of signal boost on the way. Very cool for me. My electronic drum kit is in another room and I would love to have a small cheap monitor next to it for sequencing. I had my laptop on a stand next to it for a while but I began to get terrified that I'd let a drumstick slip and destroy my laptop screen. That would be a very bad thing. Thanks for the tip.

T500 External Monitors

Similar Messages

Maybe you are looking for