T500 Fan issue; error message at boot

Am seeking help with the prospect of replacing the cpu fan on my T500 [2243-8YM].
Have done similar repair on a DV9000 so with manual and time on my hands; off I went.
Got the unit out; fan rotor was very stiff [did try to manipulate rotor as laptop was booting, got it moving but still error message] Tried blowing out all vent holes, dab of light oil on shaft and reassembled. Although fan started on its' own accord, it was not enough to stop the error message.
My concern is after having the unit in my hands and looking it over closely, I cannot see how the fan unit itself can be changed [the DV9000 had 2 very small phillips head screwa retaining the fan]. Cannot see any screws attaching fan to heat sink, but if new replacement fans are available on ebay, and they are, then they must be able to be replaced, n'est pas?
My only guess is that the small copper coloured tabs on the underside of the heatsink unit are pried open and voila` - away we go. But if that is the method, does the foil need to be retracted to gain access to any other retainers? Am really worried about causing damage to the foil, and the sealing foam around the vents.
Am attaching a picture, left image is the heatsink unit [where only 1 tab is visible] and the other image is a photo of the underside of a new fan. I have added arrows to indicate 4 likely tab locations. So am I right in assuming that the foil not only seals the vent but also secures the fan frame to the heatsink unit?
Link to image
Moderator note: images totalling more than 50k converted to links per forum rules: Lenovo Community Participation Rules

Similar Messages

Error Message at Boot-Up

WRT54GX router with Wireless-G adapter ; I get the following error message at boot - "Query My Ca Information: InfoMyCa.exe - Ordinal Not Found - The ordinal 968 could not be located in the dynamic link library LIBEAY32.dll "
Any help eliminating this message would be appreciated .

Hi Bettybee2, and a warm welcome to the forums!
As for deletion, feel free to switch iDisk Sync off and then toss the disk image. If you see a warning that the file is busy when you try to empty the Trash, log out and back in again and then empty the Trash.
http://www.macworld.com/article/134651/2008/07/massiveidiskarchive.html

Laptop mode -- where to find error messages on boot

Hi guys,
I get some error messages when booting. I have the time to read that they are related to laptop-mode, but they quickly disappear.
I have activated the ENABLE_LAPTOP_MODE_TOOLS in my laptop-mode.conf file, but I can't find the error messages in /var/log :
/var/log » ll nico@cotier
total 2152
-rw-r--r-- 1 root users 24082 20 mars 11:30 Xorg.0.log
-rw-r--r-- 1 root users 24084 20 mars 10:35 Xorg.0.log.old
-rw-r--r-- 1 root users 28050 1 juin 2013 Xorg.1.log
-rw-r--r-- 1 root users 27492 1 juin 2013 Xorg.1.log.old
-rw-r--r-- 1 root bumblebee 13679 1 juin 2013 Xorg.8.log
-rw------- 1 root utmp 18816 20 mars 10:18 btmp
-rw------- 1 root root 32032 20 mars 11:29 faillog
drwxr-xr-x 2 root root 4096 16 juin 2013 httpd
drwxr-sr-x+ 3 root systemd-journal 4096 1 juin 2013 journal
-rw-r--r-- 1 root root 292292 20 mars 11:29 lastlog
drwxr-xr-x 2 root root 4096 14 mars 2013 old
-rw-r--r-- 1 root root 159892 19 mars 14:55 pacman.log
-rw-r--r-- 1 root root 77572 5 oct. 00:47 pm-powersave.log
-rw-r--r-- 1 root root 3586 1 juin 2013 slim.log
drwxr-xr-x 2 root root 4096 9 mars 2013 speech-dispatcher
-rw-rw-r-- 1 root utmp 1745280 20 mars 11:45 wtmp
Do you know where they might be?
Thanks!

grep all these logs and systemd's journal.
If you have 'quiet' on the kernel line of your bootloader, remove it.
Last edited by karol (2014-03-20 11:52:42)

Error messages when booting up

Receive 3 error messages when booting up PS using Win 8. "Could not load the FastCore Routines Module, could not load the MMX Core, could not load the Multiprocess Support Module." Any explanation?

Ah-ha! Seems there are two Adobe program folders, one under Program Files and one under Program Files (x86). I did not know about the one under Program Files.
According to System Info:
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Plug-ins\
Creative Cloud app keeps wanting to update Photoshop CC but keeps failing. The error code is U44M1P7.
Following is all of the System Info, showing the third-party plug-ins that I installed a few hours ago from onOne and Topaz. I can't see anything odd in this, and System Info says all the plug-ins loaded.
Thanks for your help.
Quote
Adobe Photoshop Version: 14.1.2 (14.1.2 20130923.r.427 2013/09/23:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 3093 MHz
Built-in memory: 6088 MB
Free memory: 4429 MB
Memory available to Photoshop: 5289 MB
Memory used by Photoshop: 59 %
Image tile size: 1024K
Image cache levels: 4
Display: 1
Display Bounds: top=0, left=0, bottom=900, right=1600
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
NumGPUs=1
gpu[0].OGLVersion="3.0"
gpu[0].MemoryMB=2108
gpu[0].RectTextureSize=8192
gpu[0].Renderer="Intel(R) HD Graphics 2000"
gpu[0].RendererID=258
gpu[0].Vendor="Intel"
gpu[0].VendorID=32902
gpu[0].HasNPOTSupport=1
gpu[0].DriverVersion="9.17.10.3347"
gpu[0].Driver="igdumd64.dll,igd10umd64.dll,igd10umd64.dll,igdumd32,igd10umd32,igd10umd32"
gpu[0].DriverDate="20131031000000.000000-000"
gpu[0].CompileProgramGLSL=1
gpu[0].TestFrameBuffer=1
gpu[0].OCLSupported=0
gpu[0].CUDASupported=0
gpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="1.30 - Intel Build 9.17.10.3347"
gpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[1447]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[8]
gpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[16]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[16]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[16]
gpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[512]
gpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[1024]
gpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[41]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
gpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
gpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=0
Serial number: 96040202581963319193
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\
Temporary file path: C:\Users\RUSSEL~1\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 1.35T, 1.10T free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Plug-ins\
Installed components:
   ACE.dll   ACE 2013/07/14-12:09:50   79.543790   79.543790
   adbeape.dll   Adobe APE 2013/02/04-09:52:32   0.1160850   0.1160850
   AdobeLinguistic.dll   Adobe Linguisitc Library   7.0.0
   AdobeOwl.dll   Adobe Owl 2013/03/03-12:10:08   5.0.13   79.533484
   AdobePDFL.dll   PDFL 2013/03/13-12:09:15   79.499517   79.499517
   AdobePIP.dll   Adobe Product Improvement Program   7.0.0.1786
   AdobeXMP.dll   Adobe XMP Core 2013/03/13-12:09:15   79.151481   79.151481
   AdobeXMPFiles.dll   Adobe XMP Files 2013/03/13-12:09:15   79.151481   79.151481
   AdobeXMPScript.dll   Adobe XMP Script 2013/03/13-12:09:15   79.151481   79.151481
   adobe_caps.dll   Adobe CAPS   7,0,0,21
   AGM.dll   AGM 2013/07/14-12:09:50   79.543790   79.543790
   ahclient.dll    AdobeHelp Dynamic Link Library   1,8,0,31
   aif_core.dll   AIF   5.0   79.534508
   aif_ocl.dll   AIF   5.0   79.534508
   aif_ogl.dll   AIF   5.0   79.534508
   amtlib.dll   AMTLib (64 Bit)   7.0.0.169 BuildVersion: 7.0; BuildDate: Mon Apr 8 2013 2:31:50)   1.000000
   ARE.dll   ARE 2013/07/14-12:09:50   79.543790   79.543790
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
   AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
   Bib.dll   BIB 2013/07/14-12:09:50   79.543790   79.543790
   BIBUtils.dll   BIBUtils 2013/03/19-12:09:02   79.535293   79.535293
   boost_date_time.dll   DVA Product   7.0.0
   boost_signals.dll   DVA Product   7.0.0
   boost_system.dll   DVA Product   7.0.0
   boost_threads.dll   DVA Product   7.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.1.6.30929   2.1.6.30929
   CITThreading.dll   Adobe CITThreading   2.1.6.30929   2.1.6.30929
   CoolType.dll   CoolType 2013/07/14-12:09:50   79.543790   79.543790
   dvaaudiodevice.dll   DVA Product   7.0.0
   dvacore.dll   DVA Product   7.0.0
   dvamarshal.dll   DVA Product   7.0.0
   dvamediatypes.dll   DVA Product   7.0.0
   dvaplayer.dll   DVA Product   7.0.0
   dvatransport.dll   DVA Product   7.0.0
   dvaunittesting.dll   DVA Product   7.0.0
   dynamiclink.dll   DVA Product   7.0.0
   ExtendScript.dll   ExtendScript 2013/03/21-12:10:31   79.535742   79.535742
   FileInfo.dll   Adobe XMP FileInfo 2013/03/19-12:09:02   79.151561   79.151561
   filter_graph.dll   AIF   5.0   79.534508
   icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   imslib.dll   IMSLib DLL   7.0.0.116
   JP2KLib.dll   JP2KLib 2013/02/19-12:28:44   79.248139   79.248139
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libiomp5md.dll   Intel(R) OMP Runtime Library   5.0
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0
   LogSession.dll   LogSession   2.1.2.1785
   mediacoreif.dll   DVA Product   7.0.0
   MPS.dll   MPS 2013/03/15-13:25:52   79.535029   79.535029
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   ONCore7.dll   ONCore   7.0.0.0
   ONCore8.dll   ONCore   7.0.0.0
   ONCoreFoundation7.dll   ONCoreFoundation7   7, 0, 0, 0
   ONCoreFoundation8.dll   ONCoreFoundation7   7, 0, 0, 0
   ONDocument7.dll   ONDocument   7.0.0.0
   ONDocument8.dll   ONDocument   7.0.0.0
   ONProxySupport7.dll   ONProxySupport   1.0.0.0
   ONProxySupport8.dll   ONProxySupport   1.0.0.0
   PatchMatch.dll   PatchMatch 2013/06/11-12:08:08   79.542390   79.542390
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CC   CC
   Plugin.dll   Adobe Photoshop CC   CC
   PlugPlugOwl.dll   Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit)   4.0.1.34
   PSArt.dll   Adobe Photoshop CC   CC
   PSViews.dll   Adobe Photoshop CC   CC
   SCCore.dll   ScCore 2013/03/21-12:10:31   79.535742   79.535742
   ScriptUIFlex.dll   ScriptUIFlex 2013/03/21-12:10:31   79.535742   79.535742
   svml_dispmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0
   tbb.dll   Intel(R) Threading Building Blocks for Windows   4, 1, 2012, 1003
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   4, 1, 2012, 1003
   updaternotifications.dll   Adobe Updater Notifications Library   7.0.1.102 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   7.0.1.102
   WRServices.dll   WRServices Mon Feb 25 2013 16:09:10   Build 0.19078   0.19078
Required plug-ins:
   3D Studio 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   Accented Edges 14.0
   Adaptive Wide Angle 14.0
   Angled Strokes 14.0
   Average 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   Bas Relief 14.0
   BMP 14.0
   Camera Raw 8.0
   Camera Raw Filter 8.0
   Chalk & Charcoal 14.0
   Charcoal 14.0
   Chrome 14.0
   Cineon 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   Clouds 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   Collada 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   Color Halftone 14.0
   Colored Pencil 14.0
   CompuServe GIF 14.0
   Conté Crayon 14.0
   Craquelure 14.0
   Crop and Straighten Photos 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   Crop and Straighten Photos Filter 14.0
   Crosshatch 14.0
   Crystallize 14.0
   Cutout 14.0
   Dark Strokes 14.0
   De-Interlace 14.0
   Dicom 14.0
   Difference Clouds 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   Diffuse Glow 14.0
   Displace 14.0
   Dry Brush 14.0
   Eazel Acquire 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   Embed Watermark 4.0
   Entropy 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   Extrude 14.0
   FastCore Routines 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   Fibers 14.0
   Film Grain 14.0
   Filter Gallery 14.0
   Flash 3D 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   Fresco 14.0
   Glass 14.0
   Glowing Edges 14.0
   Google Earth 4 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   Grain 14.0
   Graphic Pen 14.0
   Halftone Pattern 14.0
   HDRMergeUI 14.0
   IFF Format 14.0
   Ink Outlines 14.0
   JPEG 2000 14.0
   Kurtosis 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   Lens Blur 14.0
   Lens Correction 14.0
   Lens Flare 14.0
   Liquify 14.0
   Matlab Operation 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   Maximum 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   Mean 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   Measurement Core 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   Median 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   Mezzotint 14.0
   Minimum 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   MMXCore Routines 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   Mosaic Tiles 14.0
   Multiprocessor Support 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   Neon Glow 14.0
   Note Paper 14.0
   NTSC Colors 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   Ocean Ripple 14.0
   Oil Paint 14.0
   OpenEXR 14.0
   Paint Daubs 14.0
   Palette Knife 14.0
   Patchwork 14.0
   Paths to Illustrator 14.0
   PCX 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   Photocopy 14.0
   Photoshop 3D Engine 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   Picture Package Filter 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   Pinch 14.0
   Pixar 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   Plaster 14.0
   Plastic Wrap 14.0
   PNG 14.0
   Pointillize 14.0
   Polar Coordinates 14.0
   Portable Bit Map 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   Poster Edges 14.0
   Radial Blur 14.0
   Radiance 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   Range 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   Read Watermark 4.0
   Reticulation 14.0
   Ripple 14.0
   Rough Pastels 14.0
   Save for Web 14.0
   ScriptingSupport 14.0
   Shake Reduction 14.0
   Shear 14.0
   Skewness 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   Smart Blur 14.0
   Smudge Stick 14.0
   Solarize 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   Spatter 14.0
   Spherize 14.0
   Sponge 14.0
   Sprayed Strokes 14.0
   Stained Glass 14.0
   Stamp 14.0
   Standard Deviation 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   STL 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   Sumi-e 14.0
   Summation 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   Targa 14.0
   Texturizer 14.0
   Tiles 14.0
   Torn Edges 14.0
   Twirl 14.0
   Underpainting 14.0
   Vanishing Point 14.0
   Variance 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   Variations 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   Water Paper 14.0
   Watercolor 14.0
   Wave 14.0
   Wavefront|OBJ 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   WIA Support 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   Wind 14.0
   Wireless Bitmap 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
   ZigZag 14.0
Optional and third party plug-ins:
   Perfect Batch 8 8.1.0
   Perfect BW 8 8.1.0
   Perfect BW 8 Filter 8.1.0
   Perfect BW 8 Smart Filter 8.1.0
   Perfect Effects 4 4.0.4
   Perfect Effects 4 Filter 4.0.4
   Perfect Effects 4 Smart Filter 4.0.4
   Perfect Effects 8 8.1.0
   Perfect Effects 8 Filter 8.1.0
   Perfect Effects 8 Smart Filter 8.1.0
   Perfect Enhance 8 8.1.0
   Perfect Enhance 8 Filter 8.1.0
   Perfect Enhance 8 Smart Filter 8.1.0
   Perfect Mask 8 8.1.0
   Perfect Mask 8 Filter 8.1.0
   Perfect Mask 8 Smart Filter 8.1.0
   Perfect Portrait 8 8.1.0
   Perfect Portrait 8 Filter 8.1.0
   Perfect Portrait 8 Smart Filter 8.1.0
   Perfect Resize 8 8.1.0
   Perfect Resize 8 Engine Automation 8.1.0
   Perfect Resize 8 Engine Filter 8.1.0
   Perfect Resize 8 Filter 8.1.0
   Topaz Adjust 5 10.0
Plug-ins that failed to load: NONE
Flash:
   Kuler
   Adobe Exchange
Installed TWAIN devices: NONE

Getting weird error message when booting up our computer

when booting up our iMac, we get a gray screen with an error message in 4 languages saying: "you need to restart your computer"
upon restarting, we keep getting the same message.
at the same time we noticed that the screen was very fuzzy... I re-starting holding commandoption+pr to re-set the pram. that worked to get the screen clear, but i still ended up on the same message.
after a few re-starts, the screen went back to the fuzzy view.
I have also already checked the led lights on the back to assure that the power supply was working appropriately, and i got all 3 lights ON and solid. the 4th light (overheating) was not coming on...
any ideas or recommendations??
Tks
Leo

What you are seeing is called a 'Kernal Panic'.
What is a Kernel Panic?
http://docs.info.apple.com/article.html?artnum=106227
Try this:
Repairing permissions is an important part of regular maintenance, and should always be carried out both before and after any software installation or update.
Go to Disk Utility (this is in your Utilities Folder in your Application folder) and click on the icon of your hard disk (not the one with all the numbers).
In First Aid, click on Repair Permissions.
This only takes a minute or two.
Background information here:
http://docs.info.apple.com/article.html?artnum=25751
and here:
http://docs.info.apple.com/article.html?artnum=302672
If you were having any serious problems with your Mac you might as well complete the exercise by repairing your hard disk as well. You cannot do this from the same start-up disk. Reboot from your install disk (holding down the C key). Once it opens, select your language, and then go to Disk Utility from the Utilities menu. Select your hard disk as before and click Repair.
Once that is complete reboot again from your usual start-up disk.
More useful reading here:
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/TS1417

Issue error message in a pop-up window

Hii experts,
How do I issue a message in a pop-up window in a normal report programming? For eg if i click on particular box in SAP graphic, a message window should come up with some information about that box.
Thanx in advance

Hi ,
First track the event let say at line selection(in case of reports)
then use
CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY'
      EXPORTING
        endpos_col         = 80
        endpos_row         = 25
        startpos_col       = 1
        startpos_row       = 1
        titletext          = text-300
IMPORTING
    CHOISE             =
      TABLES
        valuetab           = l_return
     EXCEPTIONS
       break_off          = 1
       OTHERS             = 2
Append the errors in l_return.
l_return is of type below:
DATA: l_return LIKE bapireturn OCCURS 0 WITH HEADER LINE.
Thanks & Regards
Ruchi Tiwari

Error message saying "Boot cam x64 is unsupported on this computer model" Anyone can help?

Hi! After Windows is installed, (step 3 done) I get an error message when installing Windows assistance software (step 4). It says "Boot Camp x64 is unsupported on this computer model". Anyone can help?
Version française:
Je suis à faire l'installation et la configuration de Bootcamp mais rendue à l'étape d'installler le logiciel d'assistance de Windows (étape 4, disque préalablement gravé à l'étape 2), j'obtiens le message d'erreur suivant: "Bootcamp x64 is unsupported on this computer model" Quelqu'un peut-il me dire quoi faire? Merci pour ceux qui se donnent la peine de répondre! Caro

copy the entire folder off the DVD to some where like Desktop (Windows) or flash memory drive
Now find "BOOTCAMP64.msi" and control + click to see pop up menu and select "TROUBLESHOOT COMPATIBILITY"
It has to do with Apple and Windows support for 64-bit OS using EFI and GPT (such as your Mac).
Some MacBook models were and then were dropped from the list of "supported Macs"
http://support.apple.com/kb/HT1846

Form Captcha Issues - Error message when not filled vs. traditional "Please fill in the following:"

Just discovered an issue regarding a form using a CAPTCHA.
When I formerly submitted other forms on sites with CAPTCHA's in the forms I created, when one did not fill out the form, a pop-up window would appear allerting the customer to "Fill in the form field" that were required, including an allert to "Enter Word Verification in box below."
I have created a new form for a new site and seem to be encountering a different issue. When the form is not filled out and the user clicks "Submit" a new page loads with a red error message saying: "ERROR: An error occurred. Image verification failed. If you believe this is incorrect, please contact your system administrator or go back and re-submit the form."
How can I correct this to simply have the same required field pop-up window appear like was happening with former developed forms?? Not sure why this form is doing this when all prior forms with CAPTHCA included were just fine. Haven't done anything different to the form that I hadn't to others in the past....Please Help!! Thanks.

Thank you for posting.
Please provide us the page URL where you have placed the form and we'll further investigate this issue. You can also contact support directly by creating a ticket or via chat.
Thanks,
Aishvarya Raj Rastogi

Error Messages when booting up Pavillion ZV5014EA

Hi there,
I have been having trouble with my HP Pavillion zv5014EA laptop. I replaced the harddrive with a Western Digital Blue Eide a couple of years back after the original hard drive failed.
On boot up I've been getting one of three messages which I've detailed below. Trouble is I'm not sure whether they relate to components of the HP notebook or the WD harddrive! I've tried installing the WD Lifeguard Diagnostics program for the harddrive and it passes both the quick and extended test.
Could anyone help me interpret these error messages?
1) First Message:
Intel UNDI, PXE-2.0 (build 082)
Copyright (c) 1997-2000 Intel Corporation
For Realtek RTL8139(X)/8130/810X PCI Fast Ethernet Controller v2.13 (020326)
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM.
2) Second Message:
A disk read error occured
Press Ctrl+Alt+Del to restart
3) Third Message:
Phoenix cME FirstBIOS Desktop Pro
Copyright 1985-2002 Phoenix Technologies Ltd.
All Rights Reserved
Build Time: 02/16/04 16:31:02
CPU = Mobile Intel (R) Pentium (R) 4 CPU 2.40GHz
640k System RAM Passed
1150M Extended RAM Passed
512k Cache SRAM Passed
System BIOS shadowed
Video BIOS shadowed
Fixed Disk 0:
ATAPI CD-ROM: SD-R6252
Mouse initialized
ERROR
0200: Failure Fixed Disk 0
Press <F1> to resume

You're very welcome, Emma:
Either the hard drive is bad (even though the tests say otherwise), or the hard drive controller on the motherboard has failed and the motherboard would need to be replaced.
I'm really thinking the drive is bad, or you wouldn't even be able to run tests on it, but I am not a computer repar technician by trade.
Replacing the motherboard on that old notebook is not worth the money.
Even if you cannot afford a new notebook (or don't want to spend a lot of money on one), you would be better off getting a refurbished notebook that would be newer and better than your current one for the price of replacing the motherboard.
Paul

U310 Error Message on Boot Up

I recently purchased an Ideapad U310. But after closing the laptop and opening it up I get an error message. I have tried to reset, boot into safemode, and pressed the Lenovo Recovery button on the side of the laptop, but the screen stays on the error message until I click ESC which leads me to boot order options, bios setup, and Diagnostic splash. These three options don't really lead me to anywhere with the error screen.
The error message reads as follows:
Recovery
Your PC needs to be repaired
The Boot Configuration Data File is missing some required information
FIle:\BDCD
Error code: 0xc000000d
You'll need to use the recovery tools on your installation media. If you don't have any intallation
media (like a disc or USB device), contact your system administrator or PC manufacturer.
Press ESC for UEFI Firmware settings
Please help me solve this. Thank you!

Firstly, to confirm, see if one key recovery works anymore. Follow the instruction in this kb
http://forums.lenovo.com/t5/IdeaPad-Y-and-U-series-Laptops/How-to-do-System-Recovery-on-Lenovo-z580/...
If you arent able to use one key recovery or you dont want to loose your c drive data, then you could use windows 7 repair console and use command prompt to rebuld a new bcd for booting.
For creating bootable windows usb drive, use Windows 7 USB/DVD Download tool. Install the program then choose the iso file of windows 7 downloaded officialy from here. After making a windows 7 usb, boot from it and follow the suggestions given in this link. However i suggest you use oneky recovery once.
http://www.sevenforums.com/hardware-devices/82226-boot-bcd-0xc000000d-unreadable-boot-configuration-...
Hope this helps
Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

Udev-acl error message when booting after removing consolekit

Hi all,
I remove consolekit (using pacman -Rdds consolekit) after the announcement, but when I reboot I see a lot of error messages (although my system boots OK):
Nov 1 19:43:42 localhost systemd-udevd[1122]: failed to execute '/usr/lib/udev/udev-acl' 'udev-acl --action= --device=': No such file or directory
Sure enough, no udev-acl executable under /usr/lib/udev
any idea on how to get rid of this annoying message on booting?

Interestingly problem not there on my 32 bit system on my netbook, only on my 64-bit [multilib] desktop

Logic Pro 8 Issues, Error Messages

Hi all.
I've been having a variety of problems with my home recording studio, which i have neglected to post about until now- from what i've read it seems no-one knows how to fix them. I'm turning to the MacTalk community to resolve my woes... First things first, here's the gear:
 MacBook Pro (mid-2008), 2.4GHz C2D, 4GB RAM, OS X 10.5.6.
 I use Logic Pro 8 primarily, and this is where all the errors are popping up. I record to WAV, 24-bit, 48KHz (for the sake of diagnosing errors, I have tried 16-bit, 44.1KHz and noticed no difference).
 All audio-related work is handled on a WD MyStudio External FW800 HDD.
 My audio interfaces are an Apogee Duet, and an M-Audio ProFire 2626 (both running latest drivers).
Now, there are 3 (possibly related) problems i'm having with my setup.
✖ Problem #1
I receive an error message indicating a 'System Overload' at random times during playback and occasionally recording.
It halts the audio, and I need to click play or record again. Sometimes it happens again and again, other times it’s just a one-off. This problem can occur with either the Duet or ProFire interface. Apparently the number of tracks I’m recording or playing is irrelevant, as it happens under many different circumstances.
✖ Problem # 2
I receive an error message telling me that the “Drive is too slow, error -10004”, and this happens only in recording (I think; oh and it looks like the previous dialogue box). As mentioned above, I use a FW800 external HDD, so it shouldn’t be a hardware requirements issue – it SHOULD be fine as far as I know. It was particularly bad when I was recording 5 channels of audio into the ProFire 2626. Like the previous issue, it halts the recording, and sometimes recurs. It may not happen with the Duet.
I may be imagining things, but I think it records fine indefinitely when I’m recording near-silence, i.e. not playing my drums. It almost seems as though the problem is triggered when I get particularly loud. Perhaps it’s clipping, I’ll have to check. Still, it shouldn’t cause an error that halts recording should it?
✖ Problem #3
This one only occurs with the ProFire. I get minor crackles and little bits of distortion and ugly tearing sounds in some channels occasionally. They each only last a fraction of a second, and usually aren’t particularly loud, but they spoil takes. Can occur during silent passages OR loud parts.
For the record, I typically record to WAV, 24-bit, 48KHz, with a 128 or 256 sample buffer, Medium Process Buffer Range, and Software Monitoring enabled. However, I have tried up to 1024 sample buffer, Large Process Buffer Range, 16-bit, 44.1KHz WAV, and turned off Software Monitoring – none of this made a difference.
So, if anyone thinks they can help me out here, please do so! I’ll greatly appreciate any input ☺
Cheers,
Chris

1. http://support.apple.com/kb/TA24535?viewlocale=en_USy
This problem points to a buffer that is set too low. Make it one step bigger, but leave the I/O safety buffer OFF.
also: you can disable the warning message.
2.
CAN also be buffer-related, but it may be the disk. Is it a 5400 or 7200 RPM disk?
It may also be that memory is too full. I would recommend installing Menumeters (freeware) http://www.pure-mac.com/diag.html#menumeters
You can monitor CPU-use, disk activity, memory use, paging activity and network activity with it.
Another thing to consider is to Freeze all Software Instrument tracks before recording. Also freeze heavily 'insert-pluginned' audio tracks. This may free up a lot of CPU power.
3. This problem might benefit from the above tips as well, but I think you can win the most by NOT using software monitoring when recording (for all three issues); it brings extra latency and puts much more strain on the CPU. Through which plugs do you monitor? And why?
I'ld recommend using the direct monitoring capabilities of both your interfaces, and avoid Software Monitoring when recording. Also being aware of what is going on (by using both Menumeters AND Logics' own CPU-meters) can be crucial - especially Paging (when active RAM is written to or read from disk) can disturb Logic, as well as background OS X applications that kick in during a session.
I also recommend turning off Journaling before a recording session. To do that, open *Disk Utility*, select the recording disk from its' list, hold down the ⌥ key and choose the menu *File>Disable Journaling*.
To turn it back on after recording, same actions, only now the menu item will say *Enable Journaling*.
regards, Erik.

Error message on booting in Windows

Dear Sir,
Since updateing to Adobe9 I get an error message which halts the boot process until I click the "OK" in the error message. This interruption of the otherwise automatic boot process is very inconvenient.
Could you please advise what steps I should take to solve this problem?
Thanks
David Robb

Looks like this is part of the Adobe download manager, which has been deleted, but not removed from startup.
Remove it (getPlus_HelperSVC.exe) using msconfig (Startup tab), or with a more comprehensive tool like
Startup Inspector.

Error message using Boot Camp

I am getting the following error message while trying to install Windows 7 via Boot Camp:
"Your disk could not be partitioned. An error occurred while partitiioning the disk"
I selected a 20Gb partition for Windows, leaving 150Gb for OS X (Mavericks).
Not sure how to proceed.

the fix is below but you need more space for windows, the absolute min should be 40gb (assuming you don't need windows for any big files, pictures, videos, gaming and are ok with disabling hibernation and your pagefile), i.e. we use a lot of 40gb partitions but only use is for business documents and spreadsheets so all files are relatively small
the appropriate size all depends on your usage but 40gb should be the min
to fix the error, restart your machine and do a PRAM reset and try installing windows again

Pease help error message panic cpu 0 caller 0x563ebd Unable to find driver for this platforlease help error message on boot up// panic cpu 0 calller 0x563ebd unable to find driver for this platform

please help errror message panic cpu 0 caller 0x563ebd Unable to find driver for this platform) i started recieving this message upon booting up with the start up chime after foolishly deleting the Apple USB ethernet host in teh system/extensions folder.I Was hoping this would be a repair for a minor error message i was recieving after a recent itunes update & it has gone from minor error message to system no start.any suggestions,i dont have the original snow leopard OSX install disc but if i get one will this fix the problem or have i destroyed my mac,,please help

Hello jayparks41
There are a few things to try and the article below can walk you through them before trying to hunt down a Snow Leopard install disk. I will say that it may come down to reinstall Snow Leopard but also before any troubleshooting, make sure to have a safe copy of your data.
OS X: About kernel panics
http://support.apple.com/kb/TS3742
Mac OS X 10.6: Reinstalling Mac OS X
http://support.apple.com/kb/PH6606
Regards,
-Norm G.

T500 Fan issue; error message at boot

Similar Messages

Maybe you are looking for