T500 Keyboard flex problem

After comparing a few laptops I decided to buy a Lenovo T500 (2082-8WG), convinced of the unbeatable quality and support.
However, I was unpleasantly surprised by the flex keyboard (left site), like mentioned already here on several posts.
Is there still a possibility to receive a better keyboard or the brackets to solve my problem? I am from the Netherlands, and I did not see anyone else with this problem from my country on this forum.

Windows 7 & switchable graphics aren't playing nice right now. I'll blame it on the ATI drivers, but it might be a BIOS issue, since the most recent BIOS says that switchable is only available for Vista.
DRJT400
T400, 2.4 GHz P8600, 2G RAM, Win7 (32 bit)
T440s, i7 4600U, 8G RAM, Win8.1 Pro (64 bit)

Similar Messages

Which part of the machine is related to the keyboard flex problem ?

Mine is T420s
And I got a keyboard flex problem.
Actually which part is related to this problem ?
Isn't it inclusive to fix this problem in the warranty ?
thx

Mine doesn't exhibit any keyboard flex and I don't think it's a common issue with T420s; anyway:
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T420s-Keyboard-Flex/td-p/454851/highlight/t...
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/t420s-keyboard-flex/m-p/755255/highlight/tr...
T420s i5-2520M HD3000 480GB Crucial M500 SSD 8GB RAM Ericsson F5521gw
T430 i5-3210M HD4000/NVIDIA 5400M 512GB Crucial MX100 SSD 12GB RAM Ericsson H5321gw

T500 keyboard key problem

Hello hru
my t500 keyboard backspace key has pushed down like it is being constantly clicked.
It works but the key does not get back to its original position after it is clicked .
Thanks

if you got warranty then you should call Lenovo and ask for a replacement to be sent to you.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

T500 keyboard

I am thinking about ordering a Thinkpad T500 but concerned about the keyboard "flex" problem. Has anything been done to solve this?
Message Edited by ghaas on 12-11-2008 12:15 PM

ghaas, welcome to the forum,
You should hopefully find the information you need in this thread in the General Discussion board.
Thanks
I am locking this thread to avoid duplicating discussion.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

T500 keyboard replacement

I recently bought a T500 after reading positive reviews and also reading that the issues with the keyboard where resloved.
When my laptop arrived, the keyboard felt awful, the left hand side around the [W] key made a lot of noise when typing and the keyboard had a lot of flex to it, I work in IT and this was one of the worst laptop keyboards I had typed on.
I got in touch with Lenovo and they sent a replacement out at no change, the new keyboard is much better.
Picture of default keyboard
Picture of replacement keyboard
Comparison Picture
Sorry about the pic quality, I took them on the phone.
I am happy with the replacement keyboard and the support. It was free of charge and arrived the next morning after speaking with support staff.
The problem seems to lie with the flexibility of the keyboard and the fact there is a gap between the keyboard and the heat sink for the graphics chip, the keyboard rattled off the heatsink. The replacement sent out is much more sturdy and does not do this.
I compared the flex between the two keyboards and the one with loads of holes which came with the T500 was very flexible while the replacement sent out was much less flexible. Unlike what was described here http://lenovoblogs.com/designmatters/?p=228

All the current T500's have the bracket. I bought mine about 5 months ago and it has the bracket.
The first pic is the earlier T500 without the bracket.
The second pic is my T500 with the bracket.
I added felt pads under the keyboard to eliminate the flex.
The felt pads totally fixed the flex problem.
Without Bracket
http://www.notebookreview.com/assets/36024.jpg
With Bracket
http://img198.imageshack.us/img198/9602/lenovokeyboardmod.jpg
T500 ~ T9400 2.53GHz 1066MHz 6MBL2 ~ Vista 32bit Home ~ WXGA 15.4 LED ~ ATI Mobility Radeon 3650 ~ 4GB ram ~ Camera ~ 160GB 7200rpm HD ~ Intel Turbo Memory 2GB ~ CD-RW/DVD ~ Intel WiFi 5300

T500 keyboard question

Hi. I'm new to the ThinkPads -- I bought a T500 for work a month and a half ago, on the recommendation of a colleague, and have just now started to use it for my day to day work.
After about a week of use, I've noticed that the arrow keys, particularly the right key, has an annoying 'clack' to it, almost as if it's bottoming out. It's much louder than the rest of the keyboard, which is fairly quiet.
I've 'googled' this issue and it appears that others complain about "keyboard flex" in the T500. I'm no connoisseur, and I have a feeling much of what goes on in the discussion (such as http://lnv.lithium.com/t5/T400-T500-and-newer-T-series/T500-Keyboard-and-Flex-How-bad-is-it/m-p/6072...) is beyond my reach. My simple question is this: is my clacking on the right key a result of "keyboard flex"?
Also, regardless of the flex question, is there a way for me to resolve this key clacking without sending anything in for repair? I've made the full switch to this laptop for work, so I really don't want to give it up if it's something I can fix on my own.

I have not experienced this specific noise, but do not think it would be related to the keyboard flex complaint. That stems from a gap under the keyboard, mostly on the left side, making it feel spongey and sloppy.
You should look carefully at the keyboard there to see if that specific key is touching the case itself, something like that. You might also remove the palm rest screws from the bottom, and carefully remove the palm rest and reset it and the keyboard to see that eliminates the noise. With the palm reset removed, you should at least be able to see what is causing the noise.
If the keyboard is bad somehow, they can send you a new one and it won't be out of service. It's pretty quick and easy to change it out, if necessary. But an inspection before you call will probably help.
Don Mannino

Re: GT683 Keyboard Flex Issue ( vibration noise)

I have a MSI GT683 and when I listen to music my keyboard makes a noise. I think it is from the bass ( the keys are vibrating ).
Does anyone have this problem?
Edited title

Quote from: ATOMANT on 19-July-11, 02:07:08
I just bought a GX680 and most of the keys on the LH side of the keyboard are very noisy. When typing there is an audible clang whenever you press any of those keys. I am being denied any RMA or warranty from NCIX.com because they claim its "not a known issue".
Atomant: That's the same experience I'm having. The clang is caused by the keyboard flexing. This causes friction on the board. It's a very annoying sound, made even worse by the fact it's only some keys.
I use a Dvorak keyboard layout, and the AOEUI keys are all on the home row left side, so they are the most commonly typed keys.
If I discover a method to quiet the keyboard, I'll post it here.

MSI GT72 keyboard flexing

Hi guys,
I've got MSI GT72 with GTX880 and noticed that keyboard flexes when pressing E, R, D, F, X, C and V keys. I.e. when I press D all other mentioned keys move slightly as well. I don't even have to press, just touch one of these keys. It doesn't feel when you don't look, but when I see this it bugs me:)
It looks like there is some empty space under that area of keys. Anybody had this problem?

Hhhmmmm im having a similar problem. My most common key (w,s,d,a)flex a little too and squeek a bit when moved around.
Would anyone know where i can get replacement keys?

Dear Lenovo, keyboard flex ...

I noticed with the T500 I purchased there existed some keyboard flex. I got sort of used to it. One of the keys broke (my own doing). I replaced the keyboard from my old T60 (FRU No: 42T3209). Wow! What a huge difference. The old design is superior in every way. It does weigh a little more but the difference in feel and ruggedness make it a much better choice. I am going to order a second 42T3209 keyboard for the T60. If anyone gets annoyed with the keyboard flex, I suggest searching (ebay, parts surplus) for the 42T3209 keyboard. To Lenovo: Please consider the old keyboard design in future models. Thank you.

There is a definite trade-off between the two types of keyboards. The more flexible keyboard is significantly lighter and more spill resistant (assumption). It also may provide a better ventilation due to the holes. The more rigid keyboard is heavier, more solid feeling (no flex), and may be less spill resistant (assumption). It may be a good idea for Lenovo to offer an option when ordering a laptop whereas customer can choose the type of keyboard, listing the benefits of each type.

A possible solution for "foreight language keyboard shortcut" problem...

Hi(Bonjour)!
Everyone know the problem of losy keyboard layout when Final Cut is used with foreight language keyboard. We loose the COMMAND-Q shorcut.
As PieroF suggested in many posts in final cut express forum, there is a workaround:
"+I just installed Leopard and I ran into this keyboard shortcut problem.+
+I can confirm that:+
+a. the problem exists also with the Italian keyboard (in addition to other languages, as pointed by other posters)+
+b. the workaround I described in my previous answer works fine :+
+- close FCE (if open)+
+- open System Preferences/International/Language+
+- drag English to the first place on top of the other languages+
+- drag your own language (Italian in my case) again on top of English (at the end the window will show the same original settings, but something happened in the heart of Leopard...)+
+- close System Preferences+
+- open FCE: now all shortcuts work as expected, and are correctly listed with their corresponding menu commands+
+It's a workaround, it's not convenient (I'd better have this bug fixed), but apparently you have to apply it only once for each system startup.+
Piero "
As stated by Piero, you have to follow this procedure after each computer startup.
I found a way to restore the COMMAND-Q shortcut with the keyboard and mouse system pref panel.
Simply add Final Cut application and add a +custom shotcut+. Be careful to type exactly the "Quit Final Cut Express" menu.
This solution allows to restart the computer.
It's work with Final Cut Express and Final Cut Pro under Leopard 10.5.4.
Michel Boissonneault

Hi Michel,
I like your suggestion because the keyboard shortcuts defined in the system preferences do not require redefinition at each startup. So in theory we could define all missing/wrong shortcuts this way, and not only the cmd-Q as you suggested. Boring, but we could do it once for all.
The only problem is that I don't know how to define shortcuts for submenus, for example "Render Selection/Both": it seems system preferences allows only to define shortcuts for the menu ("Render Selection" - in this case absolutely useless) but not for the submenu.
Do you know a way ? (I looked in the help, which didn't... help).
Piero

Weird dreamweaver keyboard mapping problem

weird dreamweaver keyboard mapping problem:
Hope this solution helps someone out. If you have q's, ask
and I will try to help.
I was having a weird problem in dreamweaver... Whenever I was
in code view and typed "shift+i" to make a capital "I", instead it
would paste from the clipboard.
I finally figured out what was happening. I compared the
menu.xml in my app support folder in the user library to the
original menu.xml file that was in the application folder. I went
through until I came across the diff:
menu.xml in my library/app support folder:

<shortcut key="Cmd+Ins" name="Copy2" platform=""
command="if (dw.canClipCopy()) { dw.clipCopy() }"
domRequired="FALSE" id="DWShortcuts_HTMLSource_Copy2" />
<shortcut key="Shift+Ins" name="Paste2" platform=""
command="if (dw.canClipPaste()) { dw.clipPaste() }"
domRequired="FALSE" id="DWShortcuts_HTMLSource_Paste2" />
<shortcut key="Shift+Del" name="Cut2" platform=""
command="if (dw.canClipCut()) { dw.clipCut() }" domRequired="FALSE"
id="DWShortcuts_HTMLSource_Cut2" />
orig menu.xml file:

<shortcut key="Cmd+Ins" name="Copy2" platform=""
command="if (dw.canClipCopy()) { dw.clipCopy() }"
domRequired="FALSE" id="DWShortcuts_HTMLSource_Copy2" />
<shortcut key="Shift+Ins" name="Paste2" platform=""
command="if (dw.canClipPaste()) { dw.clipPaste() }"
domRequired="FALSE" id="DWShortcuts_HTMLSource_Paste2" />
<shortcut key="Shift+Del" name="Cut2" platform=""
command="if (dw.canClipCut()) { dw.clipCut() }" domRequired="FALSE"
id="DWShortcuts_HTMLSource_Cut2" />
There was a diff in the "platform=" tags. The orig stated
[platform="win"], my config stated [platform=""] (nothing in
between the ""'s). So, I reset the platform tag to be
[platform="win"] in my settings and then relaunched dreamweaver. It
fixed the problem.
Not sure how this occurred, but it works now.

Calling1.4.1 signed applet from Javascript causes keyboard/focus problems

Pretty sure there's a JRE bug here, but I'm posting to forums before I open one in case I'm missing something obvious :-)
This issue may be specific to IE, I haven't tested elsewhere yet. Our web application is centered around a signed applet that is initialized with XML data via Javascript. We first noticed the problem when our users started upgrading from the 1.3.x plug-in to the 1.4.x plug-in. The major symptom was that shortcut keys stopped working. I debugged the problem off and on for about a month before I boiled it down to a very simple program that demonstrates the issue (included below). Basically, the program has a function that adds a JButton to a JPanel and registers a keyboard listener (using the new DefaultKeyboardFocusManager class) that prints a message to the console. This function is called by the applet's init() method, as well as by a public method that can be called from Javascript (called callMeFromJavascript()). I also included a very simple HTML file that provides a button that calls the callMeFromJavascript() method. You can test this out yourself: To recreate, compile the class below, JAR it up, sign the JAR, and put in the same dir with the HTML file. Load the HTML file in IE 5.0 or greater, and bring the console up in a window right next to it. Now click the button that says init--you should see the small box appear inside the button that indicates it has the focus. Now press some keys on your keyboard. You should see "KEY PRESSED!!!" appearing in the console. This is proper behavior. Now click the Init Applet from Javascript button. It has removed the button called init, and added one called "javascript". Press this button. Notice there is no focus occurring. Now press your keyboard. No keyboard events are registered.
Where is gets interesting is that if you go back and make this an unsigned applet, and try it again, everything works fine. This bug only occurs if the applet is signed.
Furthermore, if you try it in 1.3, signed or unsigned, it also works. So this is almost certainly a 1.4 bug.
Anyone disagree? Better yet, anyone have a workaround? I've tried everything I could think of, including launching a thread from the init() method that sets up the components, and then just waits for the data to be set by Javascript. But it seems that ANY communication between the method called by Javascript and the code originating in init() corrupts something and we don't get keyboard events. This bug is killing my users who are very reliant on their shortcut keys for productivity, and we have a somewhat unique user interface that relies on Javascript for initialization. Any help or suggestions are appreciated.
================================================================
Java Applet (Put it in a signed JAR called mainapplet.jar)
================================================================
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class MainApplet extends JApplet implements KeyEventDispatcher
    JPanel test;
    public void init()
        System.out.println("init called");
        setUp("init");
    public void callMeFromJavascript()
        System.out.println("callMeFromJavascript called");
        setUp("javascript");
    private void setUp(String label)
        getContentPane().removeAll();
        test = new JPanel();
        getContentPane().add( test );
        JButton button = new JButton(label);
        test.add( button );
        test.updateUI();
        DefaultKeyboardFocusManager.getCurrentKeyboardFocusManager().addKeyEventDispatcher(this);
    public boolean dispatchKeyEvent(KeyEvent e)
        System.out.println("== KEY PRESSED!!! ==");
        return false;
}================================================================
HTML
================================================================
<form>
<APPLET code="MainApplet" archive="mainapplet.jar" align="baseline" id="blah"
     width="200" height="400">
     No Java 2 SDK, Standard Edition v 1.4.1 support for APPLET!!
</APPLET>
<p>
<input type="button" onClick="document.blah.callMeFromJavascript();" value="Init Applet via Javascript">
</form>

I tried adding the requestFocus() line you suggested... Same behavior.
A good thought, but as I mention in my description, the applet has no trouble gaining the focus initially (when init() is called). From what I have seen, it is only when the call stack has been touched by Javascript that I see problems. This is strange though: Your post gave me the idea of popping the whole panel into a JFrame... I tried it, and the keyboard/focus problem went away! It seems to happen only when the component hierarchy is descended from the JApplet's content pane. So that adds yet another variable: JRE 1.4 + Signed + Javascript + components descended from JApplet content pane.
And yes, signed or unsigned DOES seem to make a difference. Don't ask me to explain why, but I have run this little applet through quite a few single variable tests (change one variable and see what happens). The same JAR that can't receive keyboard events when signed, works just fine unsigned. Trust me, I'm just as baffled as you are.

Flex problem - undefined method

Hello!
I was following the tutorial posted at http://www.adobe.com/devnet/livecycle/articles/lcdses2_mdd_quickstart.html but I'm getting an error just after I add the form.
I'm getting the following error message:
"1061: Call to a possibly undefined method commitRequiredOn through a reference with static type mx.data:DataService. ProductForm.mxml /FiberTest/src/FiberTest/forms line 89 Flex Problem"
This is in the code for ProductForm.mxml, and the same goes for lines 171, 178, 184 and 191.
Could anybody help me here?
Thanks!!
Marcos

Hi saisri2k2,
I'm using Flash Builder 4 Standard, build 272416.
Thank you!
Marcos

(foreign) keyboard mapping problems

Many people, myself included, have voiced problems with keyboard mappings since updating to Leopard. It appears to particularly afflict people with non-US keyboards, but I may be wrong.
Does anybody out there have a generic fix? Manually modifying the keyboard map as the Latvians did seems to address (some of) the symptoms, not the underlying problem. Accordingly, it doesn't appear to be a general fix, as reported here:
http://m10lmac.blogspot.com/2007/10/fixing-leopards-latvian-keyboard.html
Here are some of the other posts I saw/wrote that make me think this is a SIGNIFICANT PROBLEM IN LEOPARD:
http://discussions.apple.com/thread.jspa?messageID=5794935&#5794935
http://discussions.apple.com/thread.jspa?messageID=5644709&#5644709
http://discussions.apple.com/message.jspa?messageID=5688731#5688731
http://discussions.apple.com/thread.jspa?messageID=5854794
http://discussions.apple.com/thread.jspa?messageID=5788789

Does anybody out there have a generic fix?
There is no generic fix because the problems are unrelated, except to the extent they represent goofs in creating certain files and failure to find these before release.
The Latvian keyboard issue is caused by errors in a particular .keylayout file. I don't know of any other similar layout with the same problem (In Tiger it was Macedonian and Romanian which had such errors). The Hanin Chinese IM problem is caused by errors in a couple of files particular to it -- all the other Chinese input systems have correct mappings. The X11 keyboard mapping problem concerns a different part of OS X than the others. The issues of QWERTY/AZERTY/QWERTZ in Chinese input were present in a different fashion in Tiger and earlier and many people have switched to a different IM called QIM to solve it. Having a dead Apple key is not related to ordinary character mapping issues.
Your own issue with ViaVoice is not totally clear to me, will try to respond in that thread.

Another Compiler Bug (message: An internal build error has occurred... Unknown Flex Problem)

I was fighting with this problem for a few days. Finally I've got it resolved. I want to describe it and fill in BUG in the bug report, but I am not sure about Adobe support options. So, I am putting bug report here.
1. ASSUMPTION: All problems which compiler reports as unknown problem are the real compiler BUGs/Problems. Eventually MXML compiler/ActionScript compiler should be able to take C++ or FORTRAN code or an aribitrary text and nicely tell "Error: It is not ActionScript (Flex) code" or "the code is corrupted from Line so and so...". When compiler crashed, it is most probably due to one of the states not handled (or not handled correct). Keeping this in mind I assume, that my code has nothing to do with the compiler crash.
2. PROBLEM Description.
     - I tried to port our internal project from Flex3.5/Flex Builder 3 to Flex4.1/Flash Builder 4.
     - After checking out and trying to build code I start getting weird problems like Error 1037: Packages cannot be nested.
     - After cleaning and compiling project by project, walking up dependency tree, I was able to get rid of this problem.
     - On last Project I've got another problem (An internal build error has occurred... Unknown Flex Problem). Which I stuck with for a while.
     - When I checked log file I found following messages:
============================================================
!ENTRY com.adobe.flexbuilder.project 4 43 2010-12-21 15:45:24.353
!MESSAGE Uncaught exception in compiler
!STACK 0
java.lang.ClassCastException: macromedia.asc.parser.InputBuffer cannot be cast to flex2.compiler.as3.CodeFragmentsInputBuffer
at flex2.compiler.as3.AbstractSyntaxTreeUtil.lineNumberToPosition(AbstractSyntaxTreeUtil.jav a:1266)
at flex2.compiler.mxml.ImplementationGenerator.generateBinding(ImplementationGenerator.java: 569)
at flex2.compiler.mxml.ImplementationGenerator.generateBindingsSetupFunction(ImplementationG enerator.java:863)
at flex2.compiler.mxml.ImplementationGenerator.generateBindingsSetup(ImplementationGenerator .java:812)
at flex2.compiler.mxml.ImplementationGenerator.generateInitializerSupportDefs(Implementation Generator.java:1878)
at flex2.compiler.mxml.ImplementationGenerator.generateClassDefinition(ImplementationGenerat or.java:1044)
at flex2.compiler.mxml.ImplementationGenerator.<init>(ImplementationGenerator.java:206)
at flex2.compiler.mxml.ImplementationCompiler.generateImplementationAST(ImplementationCompil er.java:499)
at flex2.compiler.mxml.ImplementationCompiler.parse1(ImplementationCompiler.java:197)
at flex2.compiler.mxml.MxmlCompiler.parse1(MxmlCompiler.java:168)
at flex2.compiler.CompilerAPI.parse1(CompilerAPI.java:2871)
at flex2.compiler.CompilerAPI.parse1(CompilerAPI.java:2824)
at flex2.compiler.CompilerAPI.batch2(CompilerAPI.java:446)
at flex2.compiler.CompilerAPI.batch(CompilerAPI.java:1274)
at flex2.compiler.CompilerAPI.compile(CompilerAPI.java:1496)
at flex2.tools.oem.Application.compile(Application.java:1188)
at flex2.tools.oem.Application.recompile(Application.java:1133)
at flex2.tools.oem.Application.compile(Application.java:819)
at flex2.tools.flexbuilder.BuilderApplication.compile(BuilderApplication.java:344)
at com.adobe.flexbuilder.multisdk.compiler.internal.ASApplicationBuilder$MyBuilder.mybuild(A SApplicationBuilder.java:276)
at com.adobe.flexbuilder.multisdk.compiler.internal.ASApplicationBuilder.build(ASApplication Builder.java:127)
at com.adobe.flexbuilder.multisdk.compiler.internal.ASBuilder.build(ASBuilder.java:190)
at com.adobe.flexbuilder.multisdk.compiler.internal.ASItemBuilder.build(ASItemBuilder.java:7 4)
at com.adobe.flexbuilder.project.compiler.internal.FlexProjectBuilder.buildItem(FlexProjectB uilder.java:480)
at com.adobe.flexbuilder.project.compiler.internal.FlexProjectBuilder.build(FlexProjectBuild er.java:306)
at com.adobe.flexbuilder.project.compiler.internal.FlexIncrementalBuilder.build(FlexIncremen talBuilder.java:157)
at org.eclipse.core.internal.events.BuildManager$2.run(BuildManager.java:633)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:170)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:201)
at org.eclipse.core.internal.events.BuildManager$1.run(BuildManager.java:253)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:256)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:218)
at org.eclipse.core.internal.events.BuildManager.build(BuildManager.java:360)
at org.eclipse.core.internal.resources.Project.internalBuild(Project.java:516)
at org.eclipse.core.internal.resources.Project.build(Project.java:94)
at org.eclipse.ui.actions.BuildAction.invokeOperation(BuildAction.java:221)
at org.eclipse.ui.actions.WorkspaceAction.execute(WorkspaceAction.java:162)
at org.eclipse.ui.actions.WorkspaceAction$2.runInWorkspace(WorkspaceAction.java:483)
at org.eclipse.core.internal.resources.InternalWorkspaceJob.run(InternalWorkspaceJob.java:38 )
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
!SESSION 2010-12-22 09:48:27.766 -----------------------------------------------
eclipse.buildId=M20100909-0800
java.version=1.6.0_16
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
Framework arguments: -product org.eclipse.epp.package.jee.product
Command-line arguments: -data C:\Client_Flex4 -os win32 -ws win32 -arch x86 -product org.eclipse.epp.package.jee.product
================================================
3. RESOLUTION/WORK AROUND
     - I was able to get this problem cleared by putting compiler option for Flex Application projects: -keep-generated-actionscript
4. SIDE NOTE
I do not really see putting this compiler option as the solution and living with the mistery is making me fill a bit bad.

Hi Faser,
I just tried it on Vista with our latest FB Plugin build but
I was unable to reproduce your issue with the following setup:
- FB Plugin build installed by Administrator account user
under her Documents folder
- Administrator account user can launch, create Flex projects
under her own workspace without any problems
- Standard account user can launch the FB Plugin build (need
Admin's password) and create Flex project (default location) under
his own workspace
If your setup is different, can you please log a bug at
http://bugs.adobe.com/flex.
Be sure to include what build you are using, whether it's
reproducible, the detail of the setup, etc...
thanks,
Sharon

T500 Keyboard flex problem

Similar Messages

Maybe you are looking for