T500 Switchable Grapics - System Cannot enable Energy Saving Graphics

"Close any 3D or video applications and disconnect external displays"
There are no 3D or video application running and no external displays connected or otherwise. This started happened after we installed "Star Wars Old Kingdom' ... so we uninstalled it and even after several restarts still getting this error.
How can we see what 3D or video proceses this module is detecting so that we can turn it off, or delete it?

Hi slanotran,
Have you updated your Chipset, Display , Graphics and Video drivers?
Also, try deleting you current drivers and installing them manually.
If the latest drivers don't pan out try the previous driver versions.
And can you go into BIOS and make sure your settings match these:
Be AWESOME Everyday!
Donate KUDOS and Click "Accepted Solution"
Did someone help you today?
Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"
This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

Similar Messages

  • T400 Cannot switch to energy saving graphics

    I have not been able to switch to energy saving graphics for some reason.
     I keep getting the following message.
    "System cannot enable Energy-Saving Graphics
    Close any 3D or video applications and disconnect external displays. Then switch graphic processors."
    I've used dual monitors before, and played games before, and I've switched back and for from "Energy Saving" and "High performance" before, but it seems I can no longer do it.
    I don't have anything open, and I am using 1 monitor. I even made sure that pressing "Fn+F7" it shows "Computer only".
    I don't know what to do cause it's eating at my battery life when I don't even need the dedicated graphics right now. But I don't want to turn it off in the bios completely, because I need it sometimes

    Have the opposite problem - not able to switch to high performance. Interested to see if the answer to this will shed light over the issue. Out of curiosity, none of you guys have a crucial m4 ssd drive installed that you've been firmware-upgrading over the past few days?

  • Yet another temporary freezing problem, energy saving related, maybe

    I've followed uncountable suggestions about this issue, but none seem to be quite the same situation, and none of the suggestions I tried made any difference so far.
    History: MBP 17" June/2009, 8GB RAM, 500GB Seagate with sudden movement protection, started life as 10.5.7, done at least three fresh reinstalls of SL. The problem was present on the second SL install (the one I really used in production for about a year), but I solved it somehow by following uncountable Google suggestions at the time. Didn't take not of the magic one, because the problem wasn't so predictable at the time, or I didn't know enough about it, and also because I only noticed the problem was gone after a couple of weeks of normal use. Unfortunately, some time ago my filesystem went nuts on a kernel panic and, though I was able to move things back in place from lost+found, a few things wouldn't work as they should, so I went for another fresh reinstall. After I started to use the new system the problem showed up again, but I haven't being able to find a fix for it again. Current system (10.6.4) and patches regularly updated, though I tend to delay a reboot to avoid putting together all my usual windows/applications in the correct desktop/spaces. Maybe the only continuously running extension I have is Growl, since I tend to more heavily use the Unix part of the Mac through MacPorts (latex, tcpdump, nmap, bash scripts, emacs and so on). Recently I installed M$ Office, but normally I prefer OpenOffice (does M$ Office install some sort of extension?)
    Frequency: I'm almost sure it is triggered by something related to energy saving regarding turning off the screen, but it doesn't happen every time. When I'm giving a class, the machine runs on battery, the settings for screen off are shorter and if I take too long to generate some input (key press or touchpad action), the problem tends to happen. Interestingly, it's particularly more frequent when I'm giving classes:-):-), but it is happening even on my desk with power on. I'm inclined to think there's a "window of opportunity" for the bug to happen, maybe between screen dim and screen off (a few minutes?). My settings are currently at 15 minutes for the screen to go off, for both power adaptor and battery operation, but that's an attempt to lower the chances of this happening during class, which is terrible. They used to be at only a few minutes of inactivity.
    Symptoms: if I try to do anything with the machine past some period of inactivity, maybe during that window I mentioned above, there's a high chance of the bug being triggered. The system responds quickly to clicking a window, but applications don't seem to receive the focus of attention; I notice that the window frame of an application doesn't get darker when I try to select it. On a Terminal, the prompt remains as a rectangular frame instead of a filled block (I use white characters on dark background), and no matter how much I try, I cannot give the focus of attention to the visible shell on Terminal, so I can't issue any shell command to try and find out things. Changing workspaces may happen, but at a very slow speed, maybe many seconds after issueing the command. Eventually the system recovers itself, usually after several minutes, and then all user interface events that I tried during the freeze were remembered and are played sequently as fast as the machine can handle, sometimes doing unwanted things in the process due to objects receiving the wrong action (some sort of desynchronization). The outstanding event that preceeds recovering is the screen being progressively blackened and then lit again, but not instantly as in moving the pointer to a hot corner. The screen transition happens during half to a full second, after which all queued events are played at the fastest possible speed. After that the system is completely normal. In the beginning I have hard-rebooted the machine, because I didn't know it would eventually recover itself. During class I also don't have the patience to wait for long (and neither do students:-)).
    Solutions already tried:
    - disabling sms through pmset. I know it has to be disabled with this particular drive, otherwise conflicts with the drive's own mechanism. It is currently off, and had been on for a while till I refound the suggestion through google.
    - re-indexing Spotlight's DB. No change.
    - fixing file permissions (I don't see any possible relation, but anyway...)
    Don't recall what else is missing on this list, because I couldn't find a concrete suggestion for this scenario, so I believe that's about it.
    It looks to be more frequent now, to the point that I decided to stop work just to write this long msg, in the hope that someone else may have seen such behaviour and have something new for me to try.
    Thanks in advance.

    The problem is that the initial backup is incredibly slow and hasn't worked yet. I right click on the dock icon and start the backup process which after working out what needs to be copied progress's in very slow erratic bursts.
    It's hard to offer a definite solution. But there are some simple things you could try to improve the backup speed such as excluding TM backup disk from spotlight indexing (privacy tab in spotlight prefs), and excluding unecessary files and folder from the backup (e.g. applications) in TM prefs.

  • WRT54GS v.6 cannot enable security mode.

    hey guys,
    I've tried everything, even a firmware upgrade and I've been using IE and I cannot enable any security.  anytime I try to select WPA or WEP or anything it refreshes automatically back to "disabled".  I've tried multiple resets as well and am extremely confused....this is a new comp. but it seems odd for that to be a problem.
    thanks and best, 
    Adam

    After a firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch.  If you have not done this since the last firmware upgrade, please do this now and see if it corrects your problem.   If you saved a router configuration file, DO NOT use it.  You must setup the router from scratch.
    See ***  RESET TO FACTORY DEFAULTS ***  below, for how to reset your router to factory defaults.
    If the above does not fix your problem, then you probably have a communication problem between your computer and router.  To fix this, do the following:
    You do not need an Internet connection. The router's "web pages" are built into the router.
    Use Internet Explorer, it usually works.
    JavaScript must be enabled.
    Use a computer that is wired to the router.
    In the non-working computer, temporarily turn off your software firewall.
    Point your browser to 192.168.1.1 , then login to your router. Your user name should be left blank. Your password is "admin" (with no quotes), unless you changed it.
    If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
    Some Zone Alarm users have reported that adding 192.168.1.1 to their list of "trusted" addresses fixed the problem. This trick might also work with other firewalls.
    If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
    If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
    A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
    If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Report back with this problem, and also state the make and exact model number of your modem (not the router).
    If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
    If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. It should work.
    If you still have trouble, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.
    How to do a    ***  RESET TO FACTORY DEFAULTS *** 
    To reset your router to factory defaults, use the following procedure:
    1) Power down all computers, the router, and the modem, and unplug them from the wall.
    2) Disconnect all wires from the router.
    3) Power up the router and allow it to fully boot (1-2 minutes).
    4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
    5) Power down the router.
    6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
    7) Power up the router and allow it to fully boot (1-2 minutes).
    8) Power up the computer (if the computer has a wireless card, make sure it is off).
    9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
    10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
    If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
    If you cannot get "Reply from ..." in step 9 above, your router is likely dead. Report back with this problem
    If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. Report back with this problem.
    If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
    Please let me know how things turn out for you.
    Message Edited by toomanydonuts on 06-05-2009 03:08 AM

  • Photosmart C4780 install fails at "system cannot find specified file"

    My problem started simply with the printer, an HP Photosmart C4780 which has always had a wireless connection and would not print.  At first, the network connection checked out fine from the printer control panel.  I ran a Microsoft printer troubleshooter, which found a block in the print queue, and cleared it.  The first test page would not print, but the "inner test page" did print.  I didn't understand whatever that meant, so I looked for help from the HP site.
    I ran the HP Print and Scan Doctor, and it suggested I reinstall the driver.  I downloaded and saved the current one from HP (PS_AIO_06_C4700_USW_Full_Win_enu_140_175.exe) and then uninstalled the existing driver.  When I attempted to install the new one, a window popped up saying, "The system cannot find the specified file," with only one box to click which said simply "OK".  The installation went through to "review installation options", after which came “checking updates, downloading updates, installing updates” and then it was while “checking system” that the “cannot find the file” window popped up, and when I clicked “OK”, the installation window as well as the error message box, just disappeared.  What I assume was the file path was in the frame of the window, but the whole thing didn't fit so it didn't show the end.  What I could read was “C:\Users\ … \Local\Temp\7zS588E\Setup\.\Setup\hpzpnp40 …
    I found one topic on the same problem for the same model printer in the forum, which offered this fix:
    You will need to first complete a level 3 uninstall of the software. I have included the steps below for this.
    1. Press the Windows key, and the letter R
    2. Type %temp%, and click OK
    3. Open the 7z folder (most recent one if there are multiples)
    4. Open the util folder
    5. Open the ccc folder
    6. Double click on the Uninstall_L3
    Once the Uninstall_L3 has completed, please delete all items listed in the temp folder. Note, you will  not be able to to delete all items, please skip the ones that you cannot. Next please empty the trash, and perform a clean boot. I have included the document 'How to perform a clean boot in Windows'. If your computer does not request it, please restart your computer.
    Once your computer is back up, you will need to reinstall the printers software. You can either do this by using the Installation CD, or downloading the software.
    I did what was suggested, until it got to the point where it said it did not recommend removing any further items if I intended on using the HP Officejet printer (yes I have a second HP printer attached to the network) anytime in the future.  Not really understanding how this all works, I decided to stop what I was doing, so unfortunately it did not solve my problem.
    Do I need to uninstall both HP printers before I can reinstall one?  And if I do that, is there any reason I would not be able to reinstall both printers?  Sounds like I'm asking for trouble.  Bottom line... I still cannot install the driver.
    I have tried to install both the full and basic versions of the driver and always get the same result.
    I have an HP Pavilion dv6-3100t notebook, running Windows 7 Home Premium, version 6.1.7601 service pack 1, 64 bit.  I haven't installed any new hardware or software.  This printer has always had a wireless connection.  The router I use is a Netgear 54 Mbps WGR614 v6 (supplied by my cable company), and the network includes not only my notebook and the Photosmart printer, but also an ASUS desktop, another HP printer, an Officejet 6300 series (used only for printing graphics and photos with a wired connection to the router), and a Vizio smart-TV.  I use Norton 360 Premier Edition and disabled the anti-virus auto-protect when I downloaded and attempted to install the driver.
    Please help!  And thanks in advance for your time and attention.
    This question was solved.
    View Solution.

    Hi wakey-wakey,
    I would recommend accessing your Temp folders, rename a Temp folder to 7zS588E and run the installation from that folder. 
    Please keep me posted.
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • "The system cannot find the path specified" error

    Hi, Thanks for taking the time and reading.
    I had to update an old report that was made in CrystalReports. I copied the rpt files and pasted them into a csharp solution in VS 2010.
    The report structure is of a Main report and 6 subreports. I have to run this Main report many times and feed it a different integer as a parameter.
    I can preview the report in report viewer perfectly. When i try to export the main report into a pdf format
    i get an exception. I have tried a few different formats and it spews the same error. 
    Oddly enough the export sometimes works if the report i am previewing has the "Save data in the report" check box checked. My guess is that this is cached. Also when i run just the subreports through my application, it works.
    Things i have tried:
      I installed: CRRuntime_64bit_13_0_13
      I installed: CRforVS_13_0_13
      Took a look at the Procmon and i could not find an access denied error
      Event Viewer has no detail.
      Changed Registry values of ConnectionDirectoryPath and ReportDirectoryPath to "c:\"
    Code:
      if (!Directory.Exists(filePath))
      Directory.CreateDirectory(filePath);
      string fileName = filePath + string.Format(GlobalVaraiables.FILE_SAVE_NAME, i);
      cryRpt.SetParameterValue(GlobalVaraiables.FUND_DATA_KEY_PARAMETER, i.ToString());
      cryRpt.ExportToDisk(CrystalDecisions.Shared.ExportFormatType.PortableDocFormat, fileName);
    Error message:
      System.Runtime.InteropServices.COMException (0x80004005): The system cannot find the path specified.
        at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext)
        at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
        at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
        at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)
        at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToDisk(ExportFormatType formatType, String fileName)
        at FundDataPDFSaver.SaveReport.GenerateReports(List`1 l) in C:\Users\user.name.here\Documents\Visual Studio 2010\Projects\FundDataToPDF\FundDataPDFSaver\SaveReport.cs:line 74
    System Details:
    Windows 7 Enterprise N  64 bit
    ServicePack 1
    IDE:
    Visual studio 2010 .Net framework 4
    Application is set to run as "Any CPU"
    CrystalReports :
      dll's: C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet\CrystalDecisions.CrystalReports.Engine.dll
        C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet\CrystalDecisions.ReportSource.dll
        C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet\CrystalDecisions.Shared.dll
    Thanks for your help

    I don't see where you're ever setting the logons for the tables in the report and subreports.  The reports with saved data are working because they already have data in them.  The reports without saved data are not working because they don't know how to connect to the database.
    See the Database section here Crystal Reports for .NET SDK Samples - Business Intelligence (BusinessObjects) - SCN Wiki for more information about how to set the logons.
    -Dell

  • Outlook 2010 - sending mail with attachment - "The system cannot find the file specified"

    Hi forum Fellows,
    I have the following failure scenario:
    1. A user receives an e-mail with an attachment.
    2. The user opens the attachment --> Forwards the mail and writes something in the body of the e-mail
    3. For whatever reason the user leaves the e-mail and works on something else --> the user comes back to the e-mail an hour or more later.
    4. The user then wants to send the e-mail but gets the following error message: "The system cannot find the file specified"
    5. The effect is that the user cannot send the e-mail.....
    ------------------------------ TROUBLESHOOTING -----------------------
    - I can see that when the user opens an attachment this attachment is saved in the OutlookTemp folder. Actually, there is a difference between opening the attachment before or after clicking forward on the e-mail.
    ---- Before: Two files is written to the OutlookTemp folder. For example if the attachment name is FileX.pdf - there will be a FileX.pdf but also a FileX (2).pdf in the folder (if OutlookTemp is empty/do not contain a file with the name FileX.pdf already)
    ---- After: Only one file is written to OutlookTemp. That is FileX.pdf
    - Running Process Monitor when trying to forward the e-mail I can see that Outlook is calling a file that is not in the OutlookTemp folder anymore.
    **** To me this is the heart of the issue. For some reason, when a user has an e-mail with an attachment open for an extended period of time (not sure on exactly how long is necessary), files in the OutlookTemp folder is deleted - files that Outlook is depending
    on to be there.
    - Going with a totally clean OutlookTemp folder does not help.
    ------------------ NOW WHAT ---------------
    - The question now is: Is this by design? Can it be fixed by some Outlook 2010 patch? Or perhaps a group policy/registry setting as a workaround.
    ------------------------------ TECH. INFO -----------------------
    Outlook 2010 v14.0.7132.5000
    Outlook bit depth: x86
    Running on a 2008R2 SP1 TS environment.
    No antivirus on the TS
    Looking forward to hear from you.
    Regards The Red Baron
    Red Baron

    Hello Red Baron,
    Although not a complete answer, the way to treat attachments in emails require some discipline:
    1. Never open an attachment directly from the email (and NEVER edit it from there). Always save it in a known location as the desktop or (better) in a designated document folder. Then you can proceed as usual, like editing the contents, printing, forwarding
    the new version etc.
    2. Directly forwarding the attachment is ok, along with additional text in the body of the email.
    3. Having any (unsaved) document open for several hours should
    never occur. What if there is a power outage?
    Bottom line is thus Discipline. This is regardless of Operating System (which might handle temporary files differently).
    These are the rules I teach my customers and they never leave any document unsaved for hours ...
    Best regards George

  • [Forum FAQ] Cannot perform a backup schedule via Windows Server Backup and receive "The system cannot find the path specified." Error

    Symptom One
    You attempt to
    schedule a backup every day via Windows Server Backup on Windows Server 2008 R2. At the beginning, the backup works without issue. But after a few days it failed and you receive the error “Windows Server Backup:
    The system cannot find the path specified.”
    Cause
    The issue may occur if there is
    no shadow copy storage space available on the backup volume.
    Verify
    You can use the List ShadowStorage command to check if you have enough storage space to store the newly created shadow copy. If you've reviewed the size of the backup snapshot and discovered
    that there is no allocated space for the storage association, you need to resize shadowstorage.
    Solution
    You could run the command below to create shadow copy storage space on the backup volume:
    vssadmin resize
    shadowstorage /for=<ForVolumeSpec> /on=<OnVolumeSpec> [/maxsize=<MaxSizeSpec>]
    More Information
    Vssadmin resize shadowstorage
    http://technet.microsoft.com/en-us/library/cc788050.aspx
    Symptom Two
    When you add
    another external hard drive to backup schedule via Windows Server Backup on Windows Server 2012, it fails and you receive the error “The System cannot find the path specified.”
    Cause
    The issue is due to the
    Original Destination Disk was not attached to the server.
    Verify
    You could check the disk status in Disk Management to see if the Original Destination Disk is offline or removed.
    Solution
    You need to attach
    Original Destination Disk to the Server then choose another external hard drive as backup target. After that, you could remove the Original Destination Disk.
    Workaround
    To work around this issue, please use the WBADMIN command line tool to add disk.
    WBADMIN ENABLE BACKUP -addtarget :{ DiskID}
    The AddTarget parameter takes disk ID as parameter. It can be retrieved by running "WBADMIN GET DISKS" command.
    Example:
    WBADMIN ENABLE BACKUP
    -addtarget :{ aa123d14-bba0-1dd9-0d93-80aaaa6bbb63}
    More Information
    Wbadmin enable backup
    http://technet.microsoft.com/en-us/library/cc742130.aspx
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    good

  • The System cannot find the path specified

    I saved "HelloWorldApp.java" in note pad Then, what will be its path?
    In Command Prompt, .>>cd C:\java.> ENTER.
    Instead of getting C:\java> in Command Prompt, i am getting error "The System cannot find the path specified"
    I set PATH variable> C:\Program Files\Java\jdk1.6.0_05\bin since i downloaded jdk-6u5 windows.
    I am unable to proceed further (forget making .classpath and running the program.)
    My operating system is window xp.
    damp

    damp wrote:
    I saved "HelloWorldApp.java" in note pad Then, what will be its path?
    In Command Prompt, .>>cd C:\java.> ENTER.
    Instead of getting C:\java> in Command Prompt, i am getting error "The System cannot find the path specified"
    I set PATH variable> C:\Program Files\Java\jdk1.6.0_05\bin since i downloaded jdk-6u5 windows.
    I am unable to proceed further (forget making .classpath and running the program.)
    My operating system is window xp.
    dampIts path will be the path you saved it to in notepad?
    and unless you DO have a directory "c:\java" i recommend you cd to "C:\program Files\java".
    Edited by: AikmanAgain on Mar 22, 2008 9:39 AM

  • Pooladm: cannot enable pools: No such file or directory

    I'm having a problem enabling pools in Solaris 10. I used a core installation and manually installed the SUNWpool, SUNWpoolr, SUNWzoner, and SUNWzoneu packages.
    When I try to execute "pooladm -e" to enable pools I get the following error:
    pooladm: cannot enable pools: No such file or directory
    Also, when I enable the svc:/system/pools:default service it errors into maintenance state with the same error in the log file.
    I believe the problem is related to the non-existance of /dev/pool, but I'm not sure why it is not there.
    Here is the output from truss:
    bash-3.00# truss -f pooladm -e
    2753:   execve("/usr/sbin/pooladm", 0xFFBFFC8C, 0xFFBFFC98)  argc = 2
    2753:   resolvepath("/usr/lib/ld.so.1", "/lib/ld.so.1", 1023) = 12
    2753:   resolvepath("/usr/sbin/pooladm", "/usr/sbin/pooladm", 1023) = 17
    2753:   stat("/usr/sbin/pooladm", 0xFFBFFA68)           = 0
    2753:   open("/var/ld/ld.config", O_RDONLY)             Err#2 ENOENT
    2753:   stat("/lib/libpool.so.1", 0xFFBFF520)           Err#2 ENOENT
    2753:   stat("/usr/lib/libpool.so.1", 0xFFBFF520)       = 0
    2753:   resolvepath("/usr/lib/libpool.so.1", "/usr/lib/libpool.so.1", 1023) = 21
    2753:   open("/usr/lib/libpool.so.1", O_RDONLY)         = 3
    2753:   mmap(0x00010000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_ALIGN, 3, 0) = 0xFF3A0000
    2753:   mmap(0x00010000, 172032, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF370000
    2753:   mmap(0xFF370000, 93041, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF370000
    2753:   mmap(0xFF398000, 7097, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 98304) = 0xFF398000
    2753:   munmap(0xFF388000, 65536)                       = 0
    2753:   memcntl(0xFF370000, 17100, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
    2753:   close(3)                                        = 0
    2753:   stat("/lib/libc.so.1", 0xFFBFF520)              = 0
    2753:   resolvepath("/lib/libc.so.1", "/lib/libc.so.1", 1023) = 14
    2753:   open("/lib/libc.so.1", O_RDONLY)                = 3
    2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
    2753:   mmap(0x00010000, 1015808, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF200000
    2753:   mmap(0xFF200000, 909301, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF200000
    2753:   mmap(0xFF2EE000, 32017, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 909312) = 0xFF2EE000
    2753:   mmap(0xFF2F6000, 5984, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0xFF2F6000
    2753:   munmap(0xFF2DE000, 65536)                       = 0
    2753:   memcntl(0xFF200000, 144128, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
    2753:   close(3)                                        = 0
    2753:   stat("/lib/libxml2.so.2", 0xFFBFF520)           Err#2 ENOENT
    2753:   stat("/usr/lib/libxml2.so.2", 0xFFBFF520)       = 0
    2753:   resolvepath("/usr/lib/libxml2.so.2", "/usr/lib/libxml2.so.2", 1023) = 21
    2753:   open("/usr/lib/libxml2.so.2", O_RDONLY)         = 3
    2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
    2753:   mmap(0x00010000, 1540096, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF080000
    2753:   mmap(0xFF080000, 1397070, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF080000
    2753:   mmap(0xFF1E4000, 72885, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 1392640) = 0xFF1E4000
    2753:   mmap(0xFF1F6000, 2168, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0xFF1F6000
    2753:   munmap(0xFF1D6000, 57344)                       = 0
    2753:   mmap(0x00000000, 8192, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFF360000
    2753:   memcntl(0xFF080000, 202876, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
    2753:   close(3)                                        = 0
    2753:   stat("/lib/libscf.so.1", 0xFFBFF520)            = 0
    2753:   resolvepath("/lib/libscf.so.1", "/lib/libscf.so.1", 1023) = 16
    2753:   open("/lib/libscf.so.1", O_RDONLY)              = 3
    2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
    2753:   mmap(0x00010000, 172032, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF330000
    2753:   mmap(0xFF330000, 97095, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF330000
    2753:   mmap(0xFF358000, 4934, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 98304) = 0xFF358000
    2753:   munmap(0xFF348000, 65536)                       = 0
    2753:   memcntl(0xFF330000, 20432, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
    2753:   close(3)                                        = 0
    2753:   stat("/lib/libnvpair.so.1", 0xFFBFF520)         = 0
    2753:   resolvepath("/lib/libnvpair.so.1", "/lib/libnvpair.so.1", 1023) = 19
    2753:   open("/lib/libnvpair.so.1", O_RDONLY)           = 3
    2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
    2753:   mmap(0x00010000, 98304, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF310000
    2753:   mmap(0xFF310000, 24206, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF310000
    2753:   mmap(0xFF326000, 1192, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 24576) = 0xFF326000
    2753:   munmap(0xFF316000, 65536)                       = 0
    2753:   memcntl(0xFF310000, 7604, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
    2753:   close(3)                                        = 0
    2753:   stat("/lib/libexacct.so.1", 0xFFBFF520)         Err#2 ENOENT
    2753:   stat("/usr/lib/libexacct.so.1", 0xFFBFF520)     = 0
    2753:   resolvepath("/usr/lib/libexacct.so.1", "/usr/lib/libexacct.so.1", 1023) = 23
    2753:   open("/usr/lib/libexacct.so.1", O_RDONLY)       = 3
    2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
    2753:   mmap(0x00010000, 90112, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF060000
    2753:   mmap(0xFF060000, 15042, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF060000
    2753:   mmap(0xFF074000, 888, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 16384) = 0xFF074000
    2753:   munmap(0xFF064000, 65536)                       = 0
    2753:   memcntl(0xFF060000, 3568, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
    2753:   close(3)                                        = 0
    2753:   stat("/lib/libpthread.so.1", 0xFFBFF520)        = 0
    2753:   resolvepath("/lib/libpthread.so.1", "/lib/libpthread.so.1", 1023) = 20
    2753:   open("/lib/libpthread.so.1", O_RDONLY)          = 3
    2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
    2753:   mmap(0x00002000, 16384, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF3EC000
    2753:   mmap(0xFF3EC000, 12032, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF3EC000
    2753:   close(3)                                        = 0
    2753:   stat("/lib/libz.so.1", 0xFFBFF520)              Err#2 ENOENT
    2753:   stat("/usr/lib/libz.so.1", 0xFFBFF520)          = 0
    2753:   resolvepath("/usr/lib/libz.so.1", "/usr/lib/libz.so.1", 1023) = 18
    2753:   open("/usr/lib/libz.so.1", O_RDONLY)            = 3
    2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
    2753:   mmap(0x00010000, 139264, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF030000
    2753:   mmap(0xFF030000, 69442, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF030000
    2753:   mmap(0xFF050000, 6012, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 65536) = 0xFF050000
    2753:   munmap(0xFF042000, 57344)                       = 0
    2753:   memcntl(0xFF030000, 5032, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
    2753:   close(3)                                        = 0
    2753:   stat("/lib/libm.so.2", 0xFFBFF520)              = 0
    2753:   resolvepath("/lib/libm.so.2", "/lib/libm.so.2", 1023) = 14
    2753:   open("/lib/libm.so.2", O_RDONLY)                = 3
    2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
    2753:   mmap(0x00010000, 786432, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEF00000
    2753:   mmap(0xFEF00000, 693647, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEF00000
    2753:   mmap(0xFEFB8000, 28592, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 688128) = 0xFEFB8000
    2753:   munmap(0xFEFAA000, 57344)                       = 0
    2753:   memcntl(0xFEF00000, 33076, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
    2753:   close(3)                                        = 0
    2753:   stat("/lib/libsocket.so.1", 0xFFBFF520)         = 0
    2753:   resolvepath("/lib/libsocket.so.1", "/lib/libsocket.so.1", 1023) = 19
    2753:   open("/lib/libsocket.so.1", O_RDONLY)           = 3
    2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
    2753:   mmap(0x00010000, 122880, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFF000000
    2753:   mmap(0xFF000000, 44594, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFF000000
    2753:   mmap(0xFF01C000, 4277, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 49152) = 0xFF01C000
    2753:   munmap(0xFF00C000, 65536)                       = 0
    2753:   memcntl(0xFF000000, 14320, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
    2753:   close(3)                                        = 0
    2753:   stat("/lib/libnsl.so.1", 0xFFBFF520)            = 0
    2753:   resolvepath("/lib/libnsl.so.1", "/lib/libnsl.so.1", 1023) = 16
    2753:   open("/lib/libnsl.so.1", O_RDONLY)              = 3
    2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
    2753:   mmap(0x00010000, 729088, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEE00000
    2753:   mmap(0xFEE00000, 594942, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEE00000
    2753:   mmap(0xFEEA2000, 33745, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 598016) = 0xFEEA2000
    2753:   mmap(0xFEEAC000, 23232, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0xFEEAC000
    2753:   munmap(0xFEE92000, 65536)                       = 0
    2753:   mmap(0x00000000, 8192, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFF300000
    2753:   memcntl(0xFEE00000, 89508, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
    2753:   close(3)                                        = 0
    2753:   stat("/lib/libdoor.so.1", 0xFFBFF520)           = 0
    2753:   resolvepath("/lib/libdoor.so.1", "/lib/libdoor.so.1", 1023) = 17
    2753:   open("/lib/libdoor.so.1", O_RDONLY)             = 3
    2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
    2753:   mmap(0x00010000, 81920, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEFE0000
    2753:   mmap(0xFEFE0000, 3315, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEFE0000
    2753:   mmap(0xFEFF2000, 600, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 8192) = 0xFEFF2000
    2753:   munmap(0xFEFE2000, 65536)                       = 0
    2753:   memcntl(0xFEFE0000, 2240, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
    2753:   close(3)                                        = 0
    2753:   stat("/lib/libuutil.so.1", 0xFFBFF520)          = 0
    2753:   resolvepath("/lib/libuutil.so.1", "/lib/libuutil.so.1", 1023) = 18
    2753:   open("/lib/libuutil.so.1", O_RDONLY)            = 3
    2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
    2753:   mmap(0x00010000, 106496, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEEE0000
    2753:   mmap(0xFEEE0000, 26032, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEEE0000
    2753:   mmap(0xFEEF8000, 1882, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 32768) = 0xFEEF8000
    2753:   munmap(0xFEEE8000, 65536)                       = 0
    2753:   memcntl(0xFEEE0000, 6652, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
    2753:   close(3)                                        = 0
    2753:   stat("/lib/libgen.so.1", 0xFFBFF520)            = 0
    2753:   resolvepath("/lib/libgen.so.1", "/lib/libgen.so.1", 1023) = 16
    2753:   open("/lib/libgen.so.1", O_RDONLY)              = 3
    2753:   mmap(0xFF3A0000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF3A0000
    2753:   mmap(0x00010000, 98304, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEEC0000
    2753:   mmap(0xFEEC0000, 22089, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEEC0000
    2753:   mmap(0xFEED6000, 2303, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 24576) = 0xFEED6000
    2753:   munmap(0xFEEC6000, 65536)                       = 0
    2753:   memcntl(0xFEEC0000, 5656, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
    2753:   close(3)                                        = 0
    2753:   munmap(0xFF3A0000, 8192)                        = 0
    2753:   mmap(0x00010000, 24576, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEFD0000
    2753:   getcontext(0xFFBFF758)
    2753:   getrlimit(RLIMIT_STACK, 0xFFBFF738)             = 0
    2753:   getpid()                                        = 2753 [2752]
    2753:   setustack(0xFEFD2088)
    2753:   sigfillset(0xFF2F64D8)                          = 0
    2753:   stat("/platform/SUNW,Sun-Fire-T200/lib/libc_psr.so.1", 0xFFBFF1B0) = 0
    2753:   resolvepath("/platform/SUNW,Sun-Fire-T200/lib/libc_psr.so.1", "/platform/sun4v/lib/libc_psr.so.1", 1023) = 33
    2753:   open("/platform/SUNW,Sun-Fire-T200/lib/libc_psr.so.1", O_RDONLY) = 3
    2753:   mmap(0x00010000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_ALIGN, 3, 0) = 0xFEDF0000
    2753:   close(3)                                        = 0
    2753:   brk(0x00022448)                                 = 0
    2753:   brk(0x00024448)                                 = 0
    2753:   getprivimplinfo(0xFFBFF2E0, 2076)               = 0
    2753:   sysconfig(_CONFIG_NGROUPS)                      = 16
    2753:   zone_lookup("")                                 = 0
    2753:   zone_getattr(0, ZONE_ATTR_PRIVSET, 0xFEFD02C8, 12) = 12
    2753:   getppriv(PRIV_EFFECTIVE, {ffffffffffffffffffffffff}) = 0
    2753:   open64("/dev/pool", O_RDONLY)                   Err#2 ENOENT
    2753:   fstat64(2, 0xFFBFEC88)                          = 0
    pooladm2753:    write(2, " p o o l a d m", 7)                   = 7
    : 2753: write(2, " :  ", 2)                             = 2
    cannot enable pools2753:        write(2, " c a n n o t   e n a b l".., 19)      = 19
    : 2753: write(2, " :  ", 2)                             = 2
    No such file or directory2753:  write(2, " N o   s u c h   f i l e".., 25)      = 25
    2753:   write(2, "\n", 1)                               = 1
    2753:   _exit(1)

    All it took was running devfsadm and the errors were gone.

  • Could not load file or assembly 'Oracle.DataAccess, Version=2.102.2.20, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified

    Server Error in '/' Application.
    Configuration Error 
    Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. 
    Parser Error Message: Could not load file or assembly 'Oracle.DataAccess, Version=2.102.2.20, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified.
    Source Error: 
    Line 31: <compilation debug="true">
    Line 32: <assemblies>
    Line 33: <add assembly="Oracle.DataAccess, Version=2.102.2.20, Culture=neutral, PublicKeyToken=89B483F429C47342" />
    Line 34: <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" />
    Line 35: <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
    Source File: D:\AverySignatureBinders\httpsdocs\ASBNet\web.config    Line: 33 
    Assembly Load Trace: The following information can be helpful to determine why the assembly 'Oracle.DataAccess, Version=2.102.2.20, Culture=neutral, PublicKeyToken=89b483f429c47342' could not be loaded.
    WRN: Assembly binding logging is turned OFF.
    To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
    Note: There is some performance penalty associated with assembly bind failure logging.
    To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].

    For Adapter Pack 2013 the following Oracle Client(s) are needed:
    Supported client versions: Oracle Data Access Components for Oracle Client 12.1, Oracle Data Access Components for Oracle Client 11.2.0.1
    And please bear in mind that both the 32- and 64 bit versions are needed.
    Morten la Cour

  • HT3964 My computer freezes after running for about 15 min even after setting the energy saving to 3 hours

    My Mac computer freezes after running for 15 min even after seeting the energy saving to 3 hours. Any ideas how to stop the freezing/

    Hi Teodorafrombc,
    Thanks for visiting Apple Support Communities.
    If your computer is becoming unresponsive, you may want to see if specific applications are causing this behavior. Try using the Force Quit menu to check for unresponsive applications:
    Using the Force Quit feature of OS X makes an application close, even when it is not responsive.
    Important: Normally you should not need to force quit an app to close it. When an app is forced to quit, any unsaved changes to open documents are not saved, so try these methods to normally close the app first:
    Choose Quit from the app menu. For example, in Safari, choose Safari > Quit Safari.
    Choose Quit by right-clicking or control-clicking on an app's icon in the Dock
    You can find the article with these steps here:
    OS X: How to quit an unresponsive application using Force Quit
    http://support.apple.com/kb/ht3411
    If your display is going blank or seems to be going to sleep unexpectedly, try these steps first:
    Reset the system
    You can reset the Mac's parameter RAM and SMC.
    You can find the article with these steps and more information here:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    If these steps don't resolve the issue, feel free to reply with more information about the symptoms you are experiencing.
    Best,
    Jeremy

  • MDT2012 - Deployment failed, the system cannot find the file specified

    Hi everybody. 
    First, excuse me for my english, i think it's not the best thing I'm able to do, but now, I REALLY need help. 
    I encounter issues with my MDT 2012 Update 1 platform. 
    I have 5 systems to capture. All systems have 3 partitions (System, softwares, data). Capture is working fine for all parts. 
    In my Task Sequence, to deploy these images (C, D and E parts), I use a script after the "Install Operating System" which runs imagex to deploy the WIM images for D: and E:. 
    The script is the following : 
    "%DeployRoot%\Tools\x64\imagex" /apply "%DeployRoot%\Operating Systems\D_Drive\D_Drive.wim" 1 %DDrive%"
    But, for some images, the task fails on the "D" drive deployement. The wizard shows the following error : 
    Litetouch deployment dailed, return code = -214767259 0x80004005
    Failed to run the action: InstallD (ie : the script above)
    The system cannot find the file specified. (Error: 00000002; Source: Windows)
    The error is on my task which uses imagex to deploy my D and E WIM.
    So I looked to see if the file's path was the good one. 
    And it is !!!
    Wizard says that the file couldn't be find, but the file is existing, and in the good path. 
    For your information, there is no problem when I don't use multicast. Everything is working fine on unicast, not on multicast. 
    I even encounter this issue if I use my MDT server and my computers on the same switch. 
    Any help would be gratefull, my client gives me the week to resolve the issue. 
    Thanks 

    BDD.LOG
    <![LOG[Microsoft Deployment Toolkit version: 6.1.2373.0]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[The task sequencer log is located at X:\WINDOWS\TEMP\SMSTSLog\SMSTS.LOG.  For task sequence failures, please consult this log.]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Write all logging text to \\192.168.36.208\Logs$]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Validating connection to \\192.168.36.208\Logs$]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Already connected to server 192.168.36.208 as that is where this script is running from.]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Will boot into Windows PE architecture x64 to match OS being deployed.]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[OSDTargetDriveCache was determined earlier : V:]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Property OSDTargetDriveCache is now = V:]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Property OSDisk is now = V:]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ Open Control File: OperatingSystems]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[------  Applying Windows image using ImageX.exe ------]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[LTI applying image \\192.168.36.208\MDT$\Operating Systems\Master 3 avec Sysprep\CAPT.wim using ImageX]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Event 41023 sent: LTI applying image \\192.168.36.208\MDT$\Operating Systems\Master 3 avec Sysprep\CAPT.wim using ImageX]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Property SourcePath is now = \\192.168.36.208\MDT$\Operating Systems\Master 3 avec Sysprep]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Multicast transfer to directory: C:\MININT\Operating Systems\Master 3 avec Sysprep]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[<Message containing password has been suppressed>]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Command has been started (process ID 1348)]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ZTI Heartbeat: command has been running for 0 minutes (process ID 1348)]LOG]!><time="16:53:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Event 41003 sent: ZTI Heartbeat: command has been running for 0 minutes (process ID 1348)]LOG]!><time="16:53:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > 
    ]LOG]!><time="16:53:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Transfer Started.
    ]LOG]!><time="16:53:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[ZTI Heartbeat: command has been running for 5 minutes (process ID 1348)]LOG]!><time="16:58:01.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Event 41003 sent: ZTI Heartbeat: command has been running for 5 minutes (process ID 1348)]LOG]!><time="16:58:01.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > 
    ]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Transfer Complete [0x0].]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Return code from command = 0]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Multicast transfer of "\\192.168.36.208\MDT$\Operating Systems\Master 3 avec Sysprep\CAPT.wim" to "C:\MININT\Operating Systems\Master 3 avec Sysprep\CAPT.wim" completed successfully.]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply"
    context="" type="1" thread="" file="LTIApply">
    <![LOG[Cleaning off old operating system]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Skipping V:\Drivers]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[New ZTIDiskPartition : \\MININT-1H9O4H6\root\cimv2:Win32_LogicalDisk.DeviceID="V:"    \\MININT-1H9O4H6\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply"
    context="" type="1" thread="" file="LTIApply">
    <![LOG[Enabling 8dot3 name support on volume V:]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[About to run command: "\\192.168.36.208\MDT$\Tools\X64\imagex.exe"  /apply "C:\MININT\Operating Systems\Master 3 avec Sysprep\CAPT.wim" 1 V:]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread=""
    file="LTIApply">
    <![LOG[Command has been started (process ID 536)]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > ImageX Tool for Windows]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Copyright (C) Microsoft Corp. All rights reserved.]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Version: 6.1.7600.16385]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [   0% ] Applying progress ]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [   0% ] Applying progress ]LOG]!><time="17:00:49.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [   1% ] Applying progress ]LOG]!><time="17:00:49.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [   2% ] Applying progress ]LOG]!><time="17:00:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [   3% ] Applying progress ]LOG]!><time="17:00:58.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [   4% ] Applying progress: 5:28 mins remaining ]LOG]!><time="17:01:03.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [   5% ] Applying progress: 5:33 mins remaining ]LOG]!><time="17:01:07.000+000"
    <![LOG[  Console > [  99% ] Applying progress: 3 secs remaining ]LOG]!><time="17:06:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > [ 100% ] Applying progress ]LOG]!><time="17:06:50.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Successfully applied image.]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Total elapsed time: 6 min 7 sec]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Return code from command = 0]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Property LTIDirtyOS is now = TRUE]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[The image C:\MININT\Operating Systems\Master 3 avec Sysprep\CAPT.wim was applied successfully.]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Event 5625 sent: The image C:\MININT\Operating Systems\Master 3 avec Sysprep\CAPT.wim was applied successfully.]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[About to run command: "\\192.168.36.208\MDT$\Tools\X64\bootsect.exe"  /nt60 V:]LOG]!><time="17:06:52.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Command has been started (process ID 1252)]LOG]!><time="17:06:52.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Target volumes will be updated with BOOTMGR compatible bootcode.
    ]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > 
    ]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > V: (\\?\Volume{2ab15dec-99c9-19e3-baf6-94de80bab573})
    ]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > 
    ]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console >     Successfully updated NTFS filesystem bootcode.
    ]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > 
    ]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Bootcode was successfully updated on all targeted volumes.
    ]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Return code from command = 0]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Find the boot drive (if any) [True] [6.1.7601.18229] [False]]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[New ZTIDiskPartition : \\MININT-1H9O4H6\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"    \\MININT-1H9O4H6\root\cimv2:Win32_LogicalDisk.DeviceID="V:"]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply"
    context="" type="1" thread="" file="LTIApply">
    <![LOG[New ZTIDisk : \\MININT-1H9O4H6\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Found bootable drive (No Boot File Test) [ V: ]: \\MININT-1H9O4H6\root\cimv2:Win32_LogicalDisk.DeviceID="V:"]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Ready to Prepare boot partition: V:]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[About to run command: cscript.exe //nologo "\\192.168.36.208\MDT$\Scripts\ztiRunCommandHidden.wsf" ""\\192.168.36.208\MDT$\Tools\X64\BCDBoot.exe" V:\windows /l fr-fr  /s V:"]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply"
    context="" type="1" thread="" file="LTIApply">
    <![LOG[Microsoft Deployment Toolkit version: 6.1.2373.0]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[The task sequencer log is located at X:\WINDOWS\TEMP\SMSTSLog\SMSTS.LOG.  For task sequence failures, please consult this log.]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread=""
    file="ztiRunCommandHidden">
    <![LOG[Write all logging text to \\192.168.36.208\Logs$]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[Validating connection to \\192.168.36.208\Logs$]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[Already connected to server 192.168.36.208 as that is where this script is running from.]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[About to run command: \\192.168.36.208\MDT$\Tools\X64\BCDBoot.exe V:\windows /l fr-fr  /s V:]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[Command has been started (process ID 1984)]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[  Console > Boot files successfully created.]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[Return code from command = 0]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
    <![LOG[Command has returned: 0]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Run Command: X:\WINDOWS\SYSTEM32\bcdedit.exe /Store "V:\boot\bcd" /timeout 0]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[BCD> The operation completed successfully.]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[BCDEdit returned ErrorLevel = 0]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Created scratch folder.]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Copy File: C:\MININT\unattend.xml to V:\Windows\Panther\Unattend.xml]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Copied unattend.xml to V:\Windows\Panther for image apply.]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[About to run command: dism.exe /Image:V:\ /Apply-Unattend:V:\Windows\Panther\Unattend.xml /ScratchDir:C:\MININT\Scratch]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Command has been started (process ID 1516)]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Deployment Image Servicing and Management tool]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Version: 6.1.7600.16385]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > Image Version: 6.1.7600.16385]LOG]!><time="17:06:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[  Console > The operation completed successfully.]LOG]!><time="17:06:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Return code from command = 0]LOG]!><time="17:06:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[LTIApply processing completed successfully.]LOG]!><time="17:06:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Event 41001 sent: LTIApply processing completed successfully.]LOG]!><time="17:06:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Command completed, return code = -2147467259]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Litetouch deployment failed, Return Code = -2147467259  0x80004005]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="3" thread="" file="LiteTouch">
    <![LOG[Event 41014 sent: Litetouch deployment failed, Return Code = -2147467259  0x80004005]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[For more information, consult the task sequencer log ...\SMSTS.LOG.]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property RetVal is now = -2147467259]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Validating connection to \\192.168.36.208\Logs$]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Already connected to server 192.168.36.208]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[OSDTargetDriveCache was determined earlier : V:]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property OSDTargetDriveCache is now = V:]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Property OSDisk is now = V:]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\LiteTouch.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\LiteTouch.log]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\LTIApply.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\LTIApply.log]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\LTICopyScripts.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\LTICopyScripts.log]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\PnpEnum.xml to \\192.168.36.208\Logs$\MININT-1H9O4H6\PnpEnum.xml]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\Wizard.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\Wizard.log]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIBDE.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIBDE.log]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIConfigure.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIConfigure.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIDiskpart.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIDiskpart.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIDrivers.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIDrivers.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIGather.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIGather.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTINextPhase.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTINextPhase.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIPatches.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIPatches.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ztiRunCommandHidden.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ztiRunCommandHidden.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIValidate.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIValidate.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying X:\WINDOWS\TEMP\SMSTSLog\SMSTS.LOG to \\192.168.36.208\Logs$\MININT-1H9O4H6\SMSTS.LOG]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying X:\WINDOWS\Debug\Netsetup.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying X:\WINDOWS\System32\wpeinit.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Copying log C:\MININT\SMSOSD\OSDLOGS\BDD.log contents to \\192.168.36.208\Logs$\MININT-1H9O4H6\BDD.LOG]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">

  • ORA-00385: cannot enable Very Large Memory with new buffer cache 11.2.0.2

    [oracle@bnl11237dat01][DWH11]$ sqlplus / as sysdba
    SQL*Plus: Release 11.2.0.2.0 Production on Mon Jun 20 09:19:49 2011
    Copyright (c) 1982, 2010, Oracle. All rights reserved.
    Connected to an idle instance.
    SQL> startup mount pfile=/u01/app/oracle/product/11.2.0/dbhome_1/dbs//initDWH11.ora
    ORA-00385: cannot enable Very Large Memory with new buffer cache parameters
    DWH12.__large_pool_size=16777216
    DWH11.__large_pool_size=16777216
    DWH11.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
    DWH12.__pga_aggregate_target=2902458368
    DWH11.__pga_aggregate_target=2902458368
    DWH12.__sga_target=4328521728
    DWH11.__sga_target=4328521728
    DWH12.__shared_io_pool_size=0
    DWH11.__shared_io_pool_size=0
    DWH12.__shared_pool_size=956301312
    DWH11.__shared_pool_size=956301312
    DWH12.__streams_pool_size=0
    DWH11.__streams_pool_size=134217728
    #*._realfree_heap_pagesize_hint=262144
    #*._use_realfree_heap=TRUE
    *.audit_file_dest='/u01/app/oracle/admin/DWH/adump'
    *.audit_trail='db'
    *.cluster_database=true
    *.compatible='11.2.0.0.0'
    *.control_files='/dborafiles/mdm_bn/dwh/oradata01/DWH/control01.ctl','/dborafiles/mdm_bn/dwh/orareco/DWH/control02.ctl'
    *.db_block_size=8192
    *.db_domain=''
    *.db_name='DWH'
    *.db_recovery_file_dest='/dborafiles/mdm_bn/dwh/orareco'
    *.db_recovery_file_dest_size=7373586432
    *.diagnostic_dest='/u01/app/oracle'
    *.dispatchers='(PROTOCOL=TCP) (SERVICE=DWH1XDB)'
    DWH12.instance_number=2
    DWH11.instance_number=1
    DWH11.local_listener='(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=bnl11237dat01-vip)(PORT=1521))))'
    DWH12.local_listener='(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=bnl11237dat02-vip)(PORT=1521))))'
    *.log_archive_dest_1='LOCATION=/dborafiles/mdm_bn/dwh/oraarch'
    *.log_archive_format='DWH_%t_%s_%r.arc'
    #*.memory_max_target=7226785792
    *.memory_target=7226785792
    *.open_cursors=1000
    *.processes=500
    *.remote_listener='LISTENERS_SCAN'
    *.remote_login_passwordfile='exclusive'
    *.sessions=555
    DWH12.thread=2
    DWH11.thread=1
    DWH12.undo_tablespace='UNDOTBS2'
    DWH11.undo_tablespace='UNDOTBS1'
    SPFILE='/dborafiles/mdm_bn/dwh/oradata01/DWH/spfileDWH1.ora' # line added by Agent
    [oracle@bnl11237dat01][DWH11]$ cat /etc/sysctl.conf
    # Kernel sysctl configuration file for Red Hat Linux
    # For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and
    # sysctl.conf(5) for more details.
    # Controls IP packet forwarding
    net.ipv4.ip_forward = 0
    # Controls source route verification
    net.ipv4.conf.default.rp_filter = 1
    # Do not accept source routing
    net.ipv4.conf.default.accept_source_route = 0
    # Controls the System Request debugging functionality of the kernel
    kernel.sysrq = 0
    # Controls whether core dumps will append the PID to the core filename
    # Useful for debugging multi-threaded applications
    kernel.core_uses_pid = 1
    # Controls the use of TCP syncookies
    net.ipv4.tcp_syncookies = 1
    # Controls the maximum size of a message, in bytes
    kernel.msgmnb = 65536
    # Controls the default maxmimum size of a mesage queue
    kernel.msgmax = 65536
    # Controls the maximum shared segment size, in bytes
    kernel.shmmax = 68719476736
    # Controls the maximum number of shared memory segments, in pages
    #kernel.shmall = 4294967296
    kernel.shmall = 8250344
    # Oracle kernel parameters
    fs.aio-max-nr = 1048576
    fs.file-max = 6815744
    kernel.shmmni = 4096
    kernel.sem = 250 32000 100 128
    kernel.shmmax = 536870912
    net.ipv4.ip_local_port_range = 9000 65500
    net.core.rmem_default = 262144
    net.core.rmem_max = 4194304
    net.core.wmem_default = 262144
    net.core.wmem_max = 1048586
    net.ipv4.tcp_wmem = 262144 262144 262144
    net.ipv4.tcp_rmem = 4194304 4194304 4194304
    Please can I know how to resolve this error.

    CAUSE: User specified one or more of { db_cache_size , db_recycle_cache_size, db_keep_cache_size, db_nk_cache_size (where n is one of 2,4,8,16,32) } AND use_indirect_data_buffers is set to TRUE. This is illegal.
    ACTION: Very Large Memory can only be enabled with the old (pre-Oracle_8.2) parameters

  • Startup error: ldaprealm.properties (The system cannot find the file specified)

    Hello,
    I'm starting WebLogic from JBuilder 3.5; before using the LDAP realm
    everything worked fine.
    After adding the following entry to the weblogic.properties file
    weblogic.security.realmClass=weblogic.security.ldaprealm.LDAPRealm
    the WLS states following error message:
    java.io.FileNotFoundException: ldaprealm.properties (The system cannot
    find the file specified)
    The ldaprealm.properties file is located in the WL_HOME dir (same location
    as weblogic.properties)
    I've start WLS with -Duser.dir=c:\weblogic, but it didn't affect my problem.
    When starting WLS with startWebLogic.cmd, everything works fine but no
    practicalbe for me,
    because I've to start in form JBuilder in order to enable remote debugging.
    Thanx for your help in advance,
    Michael

    http://www.bea.com/support/askbea/wls/S-06632.shtml
    ldaprealm.properties has to be in %WinDir%\System32 to be picked up by a WLS 5.1 server run as a service and LDAPRealm enabled.
    Still getting interesting LDAP errors, but the file is being picked up on startup.

Maybe you are looking for

  • Can I use more than one html5/js animation produced with Flash/createjs in a website?

    Hi, I am producing some animations with Flash that will be delivered in html5/js trough createjs. The trouble is that, after including the first animation in my html website, the rest of the animations are overwriting with the first one, therefore, i

  • I need to reload system software on G5 tower but DVD drive is dead ...

    My G5 tower won't boot. It hangs up just as the blue progress bar reaches all the way to the right. I'm sure I need to reload the system software, but the DVD drive is also on the fritz and I can't use it. I put an old G4 TiBook into target disc mode

  • HP C5380 All-in-One printer.

    Since I installed Yosemite a week ago and updated the driver with the latest update from HP I faced following problems. The printer does not print text anymore and spits out empty papers. E-mail are printed without text but show the bleu e-mail addre

  • FX - the transition of the tree node arrow icon

    I want to know how can I realize this following transition effect in the TreeView: There is a arrow icon for collapse and expand. I want to see that this arrow icon appears when the tree view obtains its focus and disappears when it looses the focus.

  • SOCO: Old requirements showing up in cockpit again

    Dear SRM gurus, I have a problem where old requirements (local po's) are showing up in sourcing cockpit overnight. Does anyone know what might be the cause? And what can be done to clear these requirements as they have been sourced and completed? We