T500 unexpected shutdown after update

Yesterday I ran a system update and got three updates: Synaptics Thinkpad UltraNav went to 16.2.1.19.14, ThinkPad Power Manager went to 6.66.1, and Lenovo SHAREit went to 2.1.4.0. After the update when it went to hibernate it re-booted instead of waking up, and has been ever since. There is a generic Win& message that "A problem cause SWindows to stop correctly" but no further diagnostic codes or info. This is extremely annoying and I suspect the new Power Manager version. Is there a way to report this bug, and to revert back to the previous version. Thanks.

Thanks. I ran the ThinkVantage diagnostics, and among the CPU tests I got warning under Multicore tests. I followed the instructions to turn off system, detach power cord, re-boot and run test again, and the multicore warning appeared again. Now I am concerened that there's something wrong with the processor.

Similar Messages

  • My MacBook Pro 15" won't shutdown after update. What can I do?

    After updating my MacBook Pro it restarted and after restart it stopped and I can't shut it down. Not even holding the power button for more than 30 seconds.
    What can I do?

    Hi Cyril,
    Whats the sound of fan still coming from macbook?Keep holding power button and when it start do this
    Hold shift key-when any option does not get it performed.to resolved it hold shift key and release only when buffer is complete and a login account came.
    command +s -> a dos windows will come
    type fsck(single space) –fy
    then type reboot

  • G4 MacMini won't sleep or shutdown after update to 10.4.8

    Since updating using software update to 10.4.8 on the logout screen I mostly used the "Sleep" option after logging out from my account. To begin with things seemed fine, but now, it won't go to sleep. If I click on the button to sleep the computer, the controls get greyed out for about 30 seconds to a minute, then return to their normal state - but the computer does not enter sleep mode.
    Shutdown doesn't work either! I had to hold the power switch on the back down for a few seconds to force it to switch off. Interestingly, the internet connection light on the router was flashing irregularly while I was waiting for it to switch off.
    I have reset the permissions (only after the install, not before), reset the PRAM, and searched the system preferences to see if something is glaringly obvious as being wrong but have found nothing and no have no further clue what I can do...
    Is it related to my not wanting iTunes to provide Album Artwork at all? For some time, every time I opened iTunes it demanded I update my Album Artwork, but I don't want to and don't have an iTunes account. I had put off downloading both 10.4.8 and iTunes 7.0 for almost a week - until software update failed to provide a Cancel button for me to refuse again!
    How can I get sleep and shutdown to work properly?
    MacMini, PowerBook, PowerMac G5 DC   Mac OS X (10.4.8)   Mac OS X Server 10.4.8

    Problem Solved!
    I copied the combo update over the existing system but this alone changed nothing. Because I was unsure of which of my seemingly many OS X disks to load I rang Applecare (thank God I signed up for the three years of extra phone support - a real bargain) and they suggested I do a PMU reset - after which everything worked fine - so far.
    They warned me about not doing a PMU reset very often (I guess the PMU can only stand a certain number of these events before breaking). In order to do one follow these steps:
    1) Switch off computer;
    2) Unplug ALL leads and power cables to the computer;
    3) Wait ten seconds;
    4) Simultaneously hold the power on button down while plugging the power cable in to your Mac;
    5) Connect your other cables.
    6) Switch on and go.
    For me, this fixed all my other problems - Sleep, Restart, Shutdown, Printing, iSight, Internet connection speed, Quick Time performance, and so far I haven't seen anything else wrong to fix. Hopefully there won't be anything else to fix!
    If anything does go wrong after this, I will do the Archive and Install, which was the next suggestion from Apple which I did not need to do. So far.
    Thanks to all those who gave suggestions, I appreciate your help.
    Thanks,
    Mac

  • Exchange 2013 ECP "500 Unexpected Error" after Updates

    Hi *,
    after installing the latest Server 2012 Updates, i get the error "500 Unexpected Error" when i try to Login to the Exchange ECP. There wer no changes to the URL or front-/backend.
    I also tried the Workaround focussed over here: http://social.technet.microsoft.com/Forums/exchange/en-US/777b51ee-330d-43cc-a56e-4614d44aed7b/unable-to-access-owa-or-ecp-something-went-wrong-or-500-unexpected-error?forum=exchangesvrclientsentries but
    there were no entries like CN=Services at the ADSI edit.
    Best Regards
    Max @ Magelan Support

    Hi Max,
    Please double check the port bindings are correct.
    Please try to run lodctr /r and reset IIS as administrator.
    Found a similar thread for your reference:
    Unable to access ECP. -  "500 unexpected error"
    http://social.technet.microsoft.com/Forums/en-US/b4b7c47e-cde4-4c62-8bb1-91a5430d4814/unable-to-access-ecp-500-unexpected-error?forum=exchangesvrclients
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • MacBook-Random Shutdowns After Update

    (Note: I posted that I had solved this problem by deleting an older version of Microsoft Office, but a day later the problem resurfaced)
    1st Indication of a Problem--
    While using "Software Update" to upgrade from 10.4.8 to 10.4.9, the computer screen went black about 1/2 way through the "system optimization" part of the installation. I thought it had just gone to sleep since the white sleep indicator light was glowing on and off. However, I could not wake it from sleep and the only solution I found was to hold the power button down to fully stop the computer. Then, I powered on again to have the computer try to start up, and then go black during the gray screen. I repeated the process and each time it would get a little further into the startup process, but it would never finish loading.
    Troubleshooting Steps Taken-
    After reading about the proper troubleshooting methods, I booted from the install disks and ran "disk utility" and repaired the disk permissions as recommended, and ran the "verify disk" part of disk utility. The permissions were corrected and the disk verification process indicated the disk was ok.
    I restarted the computer and everything appeared to be fine until I opened MS Word. The screen went black again.
    Concerned that maybe the update never fully loaded, I downloaded the combo intel updater and tried to reinstall it. The computer screen went black at the exact same point during the "system optimization" stage.
    At this point, I decided to try to boot from the installation disk again and run disk utility. However, the computer now would not boot from CD, while holding down C. However, it would perform the Hardware Test by holding down D. So, I ran the hardware test and it indicated no problems.
    After restarting computer, the same black screen crash occurred while trying to use various applications. Not all would cause the crash, some crashed it, some didn't. The error was not consistent. The same program that appeared to cause the crash one time would run fine the next. Other times I would let it sit without opening a program and it would crash after a random period of time. It is important to note the fans aren't even running when this occurs, nor does the processor seem to be running fast.
    Since I could not boot from the installation CD, I decided to run disk utility while logged in normally. Again, no problems found with the disk and this time no permissions were corrected.
    So, I continued the troubleshooting process:
    *I verified the S.M.A.R.T. status = verified.
    *I checked the build number of the OS to ensure the update was complete (build = 8P2137)
    *Checked the RAM in the hardware profile, both slots indicated OK
    *Turned off all non-system fonts
    *re-installed Java just in case
    *Downloaded Cocktail and ran:
    1)all cron tasks
    2)cleared the caches
    3)rebuilt launch services database
    4)updated locate and whatis databases
    *ran FSCK
    *reset the PRAM
    *Reset the system Management Controller (SMC)
    *tried to login in verbose mode- crashed
    *tried to login to safe mode- crashed
    None of this worked, so when I could get the computer to stay up and running for a few minutes, I decide to delete unnecessary programs including MS Office.
    Immediately after deleting Office, I stopped having problems. I could now boot from the install cd, boot into safe mode, run without crashes so to speak. That was yesterday... Everything seemed fine so I re-ran some of the cleanup processes above to be sure that things were clean.
    Today, I used the computer for over two hours without problems. Then instant crash out of nowhere. Same problems above reappeared. It took several cycles to get the computer to load. I opened iTunes to see if that might be the cause since I upgraded that yesterday after the problem ceased. Sure enough the computer crashed. So, I deleted all of itunes except my music library. Still random crashes occur.
    I resorted to opening my RAM slots and resitting the RAM to be sure it was secure and it was fine, no change... still crashes.
    Two Important Notes:
    1)I have never experienced the black screen of death before.
    2)I updated the firmware shortly after I got the MacBook because I heard of the potential problems. So, the SMC is up-to-date.
    At this point, I am going to schedule an appointment with the Genius Bar for Tuesday. However, I am sure they will merely jump to an "archive and install" which I can do myself if I have to or they will try to check the RAM which I already did.
    Is there anything else I can possibly do to fix this myself before handing over my baby to them?

    I mention this because you have done such a thorough job of troubleshooting and documenting your problem. According to the link below, the system optimization step in Apple's software installation has a bug that can delete arbitrary file(s) from your system.
    http://www.unsanity.org/archives/macos_x/shock_andawe.php
    FYI.

  • Does sytem shutdown after update?

    I have played remotely this week, it has worked so good, and will not come home until after weekend. Now it does not work anymore...why oh why did I have it on automatically update ...

    stenbocken wrote:
    Ok @hayzink, that could be it, so I need somehow click on the update...tricky one.Guees wedont know until Monday.as soon as the update became available you would have been unable to use psn features till its installed. so everything will be fine just nothing you can do till your home.  

  • Photo app unexpectedly quits after updated to ios8?

    i updated my itouch to ios8 and everytime i try to view my photos taken few days ago, the app quits.

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • How im suppose to fix the auto shutdown problem in my iphone 3gs after updating to ios 5.1.1 this problem has made me a mobile ****** in my house and an loser in thing care so if any solution to this problem let me know

    how im suppose to fix the auto shutdown problem in my iphone 3gs after updating to ios 5.1.1 this problem has made me a mobile ****** in my house and an loser in thing care so if any solution to this problem let me know

    What "auto shutdown problem" are you talking about?

  • After updating to itunes 10.4 restarted, my ipod touch went into restore mode. when trying to restore it says unexpected error occured (1604) followed resolution checklist . still wont work, any thoughts............

    After updating to itunes 10.4 restarted my pc windows 7 64 bit, my ipod touch 3rd gen went into restore mode,when trying to restore it works for several minutes then says it cannot be restored, unexpected error occured (1604) I have followed the reslution checklists, still wont work, any thoughts?

    Hi
    Cannot offer any thoughts other then i am having the same problem. updated my itunes windows7 32bit ipod touch 4th gen. went into restore mode lost over 700 songs. i dont get any error messages i just cannot get into itunes store. Firewall is allowing access, etc resolution checklists done, and nothing.
    Hopefully this issue is fixed up soon...

  • My system keeps shutting off unexpectedly after updating it to OS X 10.8.2 (12C60). is there anything that can be done to correct this?

    My system keeps shutting off unexpectedly after updating it to OS X 10.8.2 (12C60). is there anything that can be done to correct this?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • TS5249 Core midi quit unexpectedly after updating garageband. solutions ?

    Core midi quit unexpectedly after updating garageband. solutions ?

    Open Console in Utilities & see if there are any clues or repeating messages when this happens.
    Might try this...
    http://www.hardmac.com/news/2004/01/26/garageband-startup-crash-fix

  • Firewire epson R2400 issues after update to 10.8.4 will not print causes system shutdown

    anyone had similar issue and or a fix?

    issues after update
    Download and install new drivers from the Epson site for your printer model.
    Epson Stylus Photo R2400, Drivers & Downloads - Technical Support - Epson America, Inc.

  • After updating to Yosemite, why will my windows in Safari and Microsoft Word close unexpectedly with no method of retrieval?

    On two different occasions after updating to Yosemite this has happened. On the first occasion I had two documents open in Microsoft Word and after looking something up on Safari, attempted to go back to the two open documents. Microsoft Word was showing as open, but the documents were nowhere to be seen and I also could open nothing else and was forced to force quit without saving my work on those documents.
    A similar thing occurred today with Safari. I had many tabs open in one window in Safari. I closed my laptop to move to another room, and upon opening my laptop again Safari was still open, but all my tabs of different research papers I had were gone. When I chose the "reopen all windows from last session" option, it reopened windows I had not had open for many days, and not the ones I had been working off that day.
    This is extremely annoying and as a scientist, I was forced to once again look up the many papers I needed for a grant proposal that I had not yet copied down reference information for. Why is this happening?

    I see you have used Clean My Mac. If you search these forums you will find that running apps like this can cause problems. Start with this link:
    Re: Re: 3 GBs used, no apps running.
    Startup Items: ℹ️
        HWNetMgr: Path: /Library/StartupItems/HWNetMgr
        HWPortDetect: Path: /Library/StartupItems/HWPortDetect
        Startup items are obsolete in OS X Yosemite
    Go to your main Library folder > Startup Items and remove the items in red.
    Macintosh HD Root folders
      Applications
      Library > Startup Items
      System
      Users

  • Dump not generating after unexpected shutdown of 2008 VM

    Hi,
    I am facing issue with my server, server is getting unexpected shutdown , this is virtual server created on VMware environment. I have checked memory dump settings are
    enabled on server  but it is not generating any type of dump.<o:p></o:p>
    below are the registry configured on server<o:p></o:p>
    HLM\System\currentcontrolset\crashcontrol\
    dumpfile-> %systemroot%MEMORY.DMP
    minidumpDir->%systemroot%minidump<o:p></o:p>
    Can someone help me on this why dump are not generating this server and what are the possible reason for dump not generated.<o:p></o:p>
    Regards, Triyambak

    yes, path is correct and it is %systemroot%\MEMORY.DMP
    so no issue with registry configuration , so what would be the issue ! 
    Regards, Triyambak

  • Image creation with MDT task sequence- "Windows has recovered from an unexpected shutdown"

    I'm using MDT 2012 U1 to build and capture a Windows 7 x86 image for deployment with ConfigMgr 2012 SP1.  I'm using the standard client task sequence in MDT.
    The MDT task sequence consistently fails after the reboot in the "Postinstall" group.  The install OS, Copy Scripts, Configure, Inject Drivers, Next Phase, and Restart Computer tasks all execute successfully, then the MDT-initiated reboot
    completes successfully.  There is nothing else helpful in the SMSTS.LOG, these are the last entries in the log:
    Successfully complete the action (Restart Computer) with the exit win32 code 0
    Sending status message
    Executing in non SMS standalone mode.  Ignoring send a task execution status message request
    Set a global environment variable _SMSTSLastActionRetCode=0
    Set a global environment variable _SMSTSLastActionSucceeded=true
    Expand a string %_SMSTSMDataPath%\Logs
    Deleting file without retrying
    The error message on the reference computer says, "Windows has recovered from an unexpected shutdown" along with "An existing in-progress deployment was found but is not in an expected state.  Would you like to ignore this in-progress
    deployment and start a new one?"
    I have found one post that suggested modifying customsettings.ini with  HideShell=Yes, which I tried.  It didn't help.
    I am not sure why MDT thinks the reboot was unexpected?  Has anybody run into this?  What steps can I take to narrow down the problem?
    Any help/suggestions are appreciated.
    Thanks,
    FP

    Thanks for your reply Phil.
    Setuperr.log is empty, zero bytes.  Setupact.log looks good to me, it has these entries at the end:
    OrchestrateUpdateImageState: Updating image state from [IMAGE_STATE_UNDEPLOYABLE] --> [Image_State_Complete]
    OOBELdr.exe exiting with code [0x0]...
    Process exited with exit code [0x0]
    c:\windows\panther\SetupInfo succeeded.
    c:\windows\panther\setupinfo.
    Windeploy.exe exiting with code [0x0]
    SetupSQM Started
    Panther path is C:\windows\Panther
    SQM not opted in
    SetupSQM is finished
    Our image environment was created during an MCS Engagement, so we have the solution pack and there are many variables in customsettings.ini.  I will need to find out how to narrow this down but I'm not finding a log file that tells me where it's choking... 
    Any suggestions are appreciated.
    Thanks,
    FP

Maybe you are looking for