T500 Wake on Lan (wireless) does not work.

Hi, 
I set up T500 (Windows 7 Ultimate 64bit) for wake on lan, 
1) Enable Bios WOL
2) Enable WOL in power manegement tab of Intel WiFi Link 5300 AGN property in device manager.
But WOL does not work. Sending magic packet from a PC in the same WiFi segment does not wake up sleeped T500.
Are there any setting for WOL in lenovo tools ?
Does anybody use WOL(WiFI) on T500?
Thanks, 

Is the T500:
Associated with an access point at the time it is put into standby/sleep mode?
Connected to AC power for the whole time it is in standby/sleep mode (in otherwords the whole time it is in a low power state) when you are attempting to use WoWLAN?
If not, that may be at least part of your problem, as it is a known limitation on WoWLAN operation.
You also need to have the laptop "set up" to the master workstation, and the WLAN configured to handle braodcast wireless frame, but I am presuming you have already done that side of things.
Cheers,
Bill
I don't work for Lenovo

Similar Messages

  • Tecra A3 - Creative Mouse Wireless does not work

    My Creative Mouse Wireless does not work while touchpad is installed.
    Even if I disable the Touchpad, the mouse seal does not work.
    Does anyone know how to solve this problem?
    Thank you,
    R.P.

    Hello
    On this way it is not easy to say what the problem is. I assume that you got some installations software for your external device. Install it and it should works.
    As far as I know functionality of external mouse doesn`t depend on touchpad settings.
    Bye

  • Wireless printing on HP 6500A Plus -wireless does not work

    windows 7, linksys E2000 router, sony vio computer wireless N.
    No issues printing by USB.  When using wireless, prints first few lines, then slows to a stop.  Loses feed from router and disconnects.  Tried disabling all firewalls, removed antivirus, etc - nothing is working.  Not the only computer in household with same issue as well - Toshiba running xp is having same problems.  Need fix or I will trash printer and never purchase HP again and I have long been an HP customer for printers.

    There have been a few issues with printing using the new E-series Linksys routers.  Make sure the router has the latest firmware. If that does not work, set a static IP address for the printer:
    - Print a Network Config Page from the front of the printer. Note the printer's IP address.
    - Type that IP address into a browser to reveal the printer's internal settings.
    - Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
    - On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). Yours is 192.168.1.100 to .149.  Let's use 192.168.1.200 for your printer.
    - Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
    - Enter your router's IP (on the Network Config Page) for the gateway and first DNS. Leave the second one blank.
    - Click 'Apply'.
    Now, shut down the router and printer, start the router, wait, then start the printer.
    After this you may need to redo 'Add a Printer' using the new IP address.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • My wake-up/sleep button does not work, but the serial is out from Apple list to repair. What i do now?

    The wake-up/ sleep iPhone 5 botton does not work, but the serial number is out of list to recall from Apple. The problem is so similar the described in the article in the site. I want to repair in the program, like other iPhones, how it is possible?
    Thanks.

    Then there isn't anything you can do about it then. Your only choice is to pay to have the device fixed or replaced. Apple is in charge of that, and as I said in the other thread, this is not Apple you are talking to, we are users like you and cannot do anything about that.

  • HP 5524 Wireless does not work after firmware upgrade

    HI,
    I have just purchased an HP5524.  After initial problems setting up the WPA key from the printer screen, I connected via USB, found the printer and swapped to wireless successfuly. I then installed the printer software on all my computers at home successfully over wireless.
    The printer then needed a firmware upgrade to support eprint (?), which is successfully connected, downloaded the fireware, installed and went through the boot cycles successfully. 
    However, ever since wireless will not work.  Before I return it to the retailer as "not fit for purpose" I thought I would ask the forum.  The diagnostics downloaded a tool, which I went through, but this did not offer solutions that I had not already tried.
    Thank you

    Hi,
    Thank you for posting you query,
    In order to resolve the issue, please make sure the printer is placed closer to the router and uninstall the printer drivers already installed and then start the instalaltion and seelct teh connection type as wireless network. Then select use USB to configure wireless and when prompted conenct the USB cable and then select the network and enter the encryption key follow the onscreen  instructions.
    If the issue still persisits, please open the browser and in the address bar enter the IP address of the router and click on GO. This will take you to the router configuration page. On the router page, please click on Wireless Setup  and please make sure SSID Broadcast is enabeld and the Wireless Mode is set to Mixed or 802.11 B/G/N and the Wireless Channel is set to 11 and click on Apply. Then try to connect the printer to the network by using the CD.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"
    (Although I am employed by HP, I am speaking for myself and not for HP)

  • Wake on LAN, Keyboard, Mouse not working - PLEASE help!

    Hey Guys,
    I'm not sure if this is the right place to post this question.  I have an Asus laptop that is connected to an external keyboard and mouse.  I want to be able to put the PC in sleep mode, then be able to wake it up with the mouse or keyboard. 
    I've tried many trouble shooting steps, including the enabling of "Power Management" / "Allow this device to wake up the computer" and the enabling of the "USB selective suspend setting" in the power options.  None of which
    resolved the issue.  When I enable the "Allow this device to wake up the computer" in the Keyboard, mouse, or LAN adapter, the option does not stay selected after rebooting.  Does anyone know of a solution, or can point me in the right
    directions?
    TIA,
    George

    And try : http://www.sevenforums.com/tutorials/122027-devices-allow-prevent-wake-up-computer.html
    http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/setting-for-allow-device-to-wake-computer-grayed/f0ae0da7-524e-4ce7-bd48-d9d32f9872ea
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • Call Of Duty LAN Servers does not work after installing Mavericks on my Mac Air, I need help!

    Hey everyone, I have some troubles making LAN servers on Call of Duty 4 and people can't join them after installing Mavericks on my Macbook Air. I need help!
    Thx!

    Hi,
    You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
    Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
    one used by the Form contact for Form Invoice.
    Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
    VS General Question forum mainly discusses
    the usage of Visual Studio IDE such as
    WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
    System and Visual Studio Editor.
    Thanks,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • FIOS Mobile App - Wireless Does Not Work

    Hello all,
    I am trying to use the new FIOS Mobile app on my Android tablet. This should allow me to watch some live TV, however when I try to connect to a channel it tells me I need to be connected to my broadband router.
    In my setup at home my FiOS broadband router does not handle wireless connections, only wired. I have a separate wireless AP that does this. Why should it matter where I get my wireless connection from, as long as I am connected?
    Help.
    Thanks,
    Steve

    billosaur wrote:
    Someone may have thought this was a great idea, but it's very frustrating to download an app, know that you meet all the criteria for using it, then be unable to use it because the app is unable to differentiate successfully that you are, in fact, on you home network. There's one router in my home, it's a Verizon router, and the app should be smart enough to know this. It's obvious that this app was rushed out without a throrough enough suite of tests, because something this simple should not happen. Is there a ticket in place for this? Is the application support group actively trying to rectify this problem? I'll give Verizon a while to sort it out, but this doesn't please me.
    Send the developers an email at [email protected]  I'm fairly confident they don't monitor this site.  If they don't hear from enough people like you with this issue, they won't fix it.  So please notify them of your issue.  Many are complaining on the Google Play app user reviews about the same problem you have.  You can see then on the Google Play site by accessing the site via a PC.

  • OfficeJet Pro 8600 Plus Wireless DOES NOT WORK with Mac Mavericks Based Network

    Replaced my Brother system with the HP OfficeJet Pro 8600 Plus yesterday.  There are many positive features of the 8600 Plus that prompted me to purchase it...
    Modular Design
    Large legal sized Scanner
    Standard/Legal Paper Printer
    Copy
    E Print Capability
    High Yield / Affordable Toner Replacements
    Unfortunately, I discovered the Wireless network capability is less than desirable.  After hours of installing, reinstalling, work arounds, internet solution searches, it just will not work.  If you are able to get the printer to work on your network (with router), the scanner will not be visible, vice versa, etc...etc...etc...
    HOWEVER, I did discover this solution.  If the unit is near your base computer, install it to your computer with a usb connection.  That allows you to have scanning and printing from that unit.  Then you can connect the unit through its ethernet connection to your router.  From there all computers can print within your network.  It's not the best way to connect a WIRELESS printer, but at least it works.
    I'm not certain why HP and Apple can't find a solution, but I never found anything on the net that worked.  The problem seems to stem from the new Mavericks update from Apple, but I'm really not sure.  I wasted an entire day of productivity attempting to make it work.  I'm posting this so you don't make the same mistake.  If you happen to know a verified solution, then I would welcome the information.  Best of luck!!!

    It may be a mac driver issue. Try installing the bootcamp update for your version of vista from here:
    http://www.apple.com/support/bootcamp/
    I'm not sure if this is supposed to work since I've never tried mac hardware at 5ghz on windows before...

  • IOS6: Beats Wireless Does Not Work Properly With Bluetooth

    Half year ago, I spent 400 USD of my hard-earned money on a Beats Wireless headset (v2).... LOVE that headset... great sound when playing music and very good sound quality too when talking on the phone (iPhone 4S).
    However, since "upgrading" to iOS 6, my Beats Wireless headset keeps on stopping when I play music (or skips parts of the music)... it is ANNOYING to say the least!
    It's my understanding that it's a known problem, but WHY does Apple not DO anything about it??? The issue has been there for a long time now, and people who use Bluetooth in their cars have reported issues with using Bluetooth, too! Apple actually puts the lives of those drivers in danger by not fixing the problem!!
    WAKE UP, APPLE!!!
    I am just SO disappointed by Apple and iOS6... I am strongly comtemplating selling my iPhone and NEVER go back to an Apple product again!!!!!

    I concur.  I have the same problem with my Wireless Beats and my iPhone5.  Skipping and disconnecting mid song.  I'm hoping this will get fixed with the next update.  Funny thing is, my other bluetooth devices, jaybird, LG soundbar work fine...  I don't know who to point the finger at because it worked fine prior to upgrading my iPhone4 w/ iOS6.

  • Tx2000 wireless does not work all of a sudden

    I just found out one morning that my WLAN doesn’t work anymore and my laptop could not search for wireless networks. Actually, I experienced the same problem a couple of months after I bought my laptop (by that time it was still under warranty). To avoid so much hassle in schedules, What I did was bring it back to factory setting and luckily solved the problem. Few months later, the same problem arose! Again, I cannot pick up a wireless signal in our house. From my previous experience, I set it back to factory setting hoping to fix it but this time around it did not solve the problem anymore. I searched over the net so I could fix it myself. And to my surprise it was not only me who had experienced this very same problem but a lot more in the world. One reason they brought out is the defective NVIDIA.   
    I’m really desperate to fix this because I cannot afford to buy a new one. My warranty has already expired since it was a year ago when I bought my laptop.
    Please help me..

    I have an TX1260ea and i also have this problem. I email HP support and they told me to do the usual stuff like reinstall drivers, flash bios, go back to factory settings. Of course none of them worked so they said it was a problem with the wireless card and would send me and new one, this was over 4 months ago and im still waiting.
    However just before they sent me an email to say they will send me a new wireless card, i had already bought one from the internet, which i did recieve. However this card did not fix the problem either so it seems to be a problem with the part of motherboard that the wireless card connects to.
    I was able to purchase a very small edimax usb wireless adapter for £10, which works a treat. My wireless card does work every now and again, but very rarely.
    Message Edited by dont_be_hasty on 10-05-2009 01:30 PM

  • I updated the Ipad mini to IOSx 6.0.2 and now the wireless does not work,

    Hi
       when I try to connect my Ipad mini to any network, The message is: "Unable to join the network".  do you have the same problem?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • WRVS4400N wireless does not work until wired computer is started

    Hi!
    I have a WRVS4400N and is overall very pleased with it. I have desktop computer which is connected by wire and a laptop which is wirelessly connected (WPA). I use DHCP for both computers and the router is connected to Internet with a static IP. Pretty much all settings are default and the router has the latest firmware.
    However I have a problem, sometimes I am unable to get a wireless connection with the laptop. The signal strength is always excellent or very good, but I am unable to get any connection. If I choose 'repair' (Windows XP) it seems to get stuck on "Getting new IP address". I have tried many many many things, rebooting router/laptop and so on but I am pretty sure it is not any problem with the laptop (it's been working great on several other WLANs).
    But...
    Now I have noticed a strange coincidence and that is 99% of the times when I am unable to connect wirelessly, the desktop computer is shut down. As soon as the desktop computer is started and I try to connected with the laptop again, it works!  (There are never any problems with the wired connection.)
    If anyone have the same problem or some suggestions/tips what to do please let me know.

    well yeah its my first time hearing that kind of problem..
    try enabling MAC address clone on the router.

  • MBP wireless does not work, DSL does....all of the sudden.

    Hi Forum, I turned on the MBP this morning (while captureing vid on my POWERMAC), to check email. Wireless said I was not connected to internet....but the DSL on the powerbook (and when I plug it into the macbookpro) works fine. Unplug it and no internet connection...though the wireless signal shows strong. i've looked in the forum, help, etc, and can't seem to find a way to actually "connect" again via wireless....i saw something on the forum about WEP but do not know what this is.....can anyone please advise....OK...I'm unplugging the DSL cable now!
    Thanks
    Mark

    hey mark
    what kinda of a router do you have and do you know what kinda IP address it is giving your computer?
    WEP stands for Wired Equivalent Privacy just a level of security that will be on a network there are a few different kinds that can be set up the type of router you have might give some more insite on this for me
    one thing you might try is setting up a test location in the network preferences and try joining again

  • Wireless does not work after chaning my router

    I have HP P1102W laser jet printer.
    The wireless feature worked fine until I recently changed my internet router(from linksys to cisco), and now I can't seem to get the wireless connection with my printer.
    I tried reinstalling the printer using the CD-rom but to no avail. 
    What can I do to get the wireless connection back?

    Hi,
    Thank you for posting you query,
    In order to resolve the issue, please make sure the printer is placed closer to the router and uninstall the printer drivers already installed and then start the instalaltion and seelct teh connection type as wireless network. Then select use USB to configure wireless and when prompted conenct the USB cable and then select the network and enter the encryption key follow the onscreen  instructions.
    If the issue still persisits, please open the browser and in the address bar enter the IP address of the router and click on GO. This will take you to the router configuration page. On the router page, please click on Wireless Setup  and please make sure SSID Broadcast is enabeld and the Wireless Mode is set to Mixed or 802.11 B/G/N and the Wireless Channel is set to 11 and click on Apply. Then try to connect the printer to the network by using the CD.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"
    (Although I am employed by HP, I am speaking for myself and not for HP)

Maybe you are looking for