T500 Win7 64 bit Integrated Camera Not Working

I have a T500 64 bit with Win7 Pro. The integrated camera in the device manager has the following error:
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
I have installed the latest driver from the Lenovo site:
http://www-307.ibm.com/pc/support/site.wss/MIGR-70600.html
And made sure after I installed this driver, the version in device manager is the same: 1.32.500.0
I have also installed Yawcam but it says no device selected when I launch it. It doesnt detect the integrated camera.
Please help in resolving this.
Thanks,
Mazen

did not correct the issue for me, nor did instally easy capture as suggested elsewhere on this site... the key combo Fn-F6 has no effect the only key combination that does anything is Fn-PgUp which only turns on the camera light. Attempting to install the driver for the integrated camera fails silently (dies before completely installing without notice) so I am at a loss, I have been trying to get this working off & on for about 31/2 months to no avail and am about to give up and deal with a USB solution.

Similar Messages

Thinkpad T500 Integrated Camera not working

The integrated camera is can't be detected!
Integrated camera doesn't show up in device manager or BIOS
tried to reinstall drivers didn't work either.
camera was working fine and all the sudden just disappeared.
Help

Hi AnchorsT,
Were there any upgrades done to the system recently?
Has there been any dropped or anything?
How long have you had your system and how long has the camera not been working?
What operating system are you using?
Be AWESOME Everyday!
Donate KUDOS and Click "Accepted Solution"
Did someone help you today?
Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"
This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

Integrated Camera not working on X201

Hello
I have a X201 3626-A61. Installed windows XP.
1. I have a brand new hard disk, installed fresh windows XP and my integrated camera works perfectly from windows explorer. Through device manager, I checked that its sensed as a USB Video Device and uses I guess the default microsoft driver. I did this extra step to ensure that there is NO hardware problem with my camera.
2. Then I insert back my regular hard disk that I use daily. This is where the problem is. As soon as I right click on the "USB video device", I get error "Creation of Video preview failed". In device manager, it shows as USB video device and shows the default microsoft driver. I have tried downloading both versions of the drivers available on lenovo ( I dont know why there are 2 separate files) and it does not help. When I install them, device manager show's up as "integrated camera". Uninstall of lenovo driver actually does not uninstall it correctly. So I had to delete all the relevant entries from the registry and even from oem*.inf files. No luck
I even tried to un-install the "usb video device" from device manager and also uninstalled all the items listed under "universal serial bus controllers".. but no luck.
One thing I observed was that as soon as I uninstall all these and then do a scan for hardware changes, it installs the enhanced host controller, usb root hub, generic usb hub, and for a second it detects it as "integrated camera" with a yellow mark and then it automatically changes to "USB video device". I feel this is the error.. where the Lenovo driver remains are still there somewhere and it partially detects it as integrated camera and then it conflicts with the Microsoft USB video camera drivers......
Can some one please help ?

Serge1410 wrote:
hey manojpatil,
let me get this right
new hard drive with fresh XP, camera works correctly.?
old hard drive with (os?), camera fails to work?
I'm a bit curious to know, lets say with the old hard drive- will the camera work if you uninstall the drivers and let windows install generic drivers ?
If possible, try uninstalling on Lenovo software that you have installed on your unit and try again
Yes, when I insert a brand new hard disk and then install a fresh Windows XP on it, the camera works like a charm. It shows up as a USB Video device on my windows explorer and when clicked, it shows my face I carried out this experiement to ensure that there is no connections or hardware issue.
However, when I insert my original regular use hard disk that has 5 month old win XP ( which means i have installed softwares on it ), it does not WORK. I have tried installing, uninstalling the Lenovo software. No luck, even after uninstallation, the driver was still pointing to the lenovo binaries/dlls, so I did a clean up of those using regseeker in the registry... and then let windows xp find the hardware, which it does and installs the default windows drivers and the camera shows up as "USB video device" in device Manager. However, when I click on it in the windows explorer, I do not get any image but the error "video preview failed........". I even tried copying al the .ax, .dll and .sys files that device manager shows in the brand new hard disk / new XP onto my hard disk,,, but not luck..... This is just so very frustrating..... as I cannot install fresh my XP....
What is confusing to me that why is the driver that is available on the Lenovo website not fixing my problem when I install them fresh on my old hard disk ? Also, there are 2 links on the Lenovo website that point to 2 different binaries for the integrated camera drivre and I have tried using both.

T530 Lenovo Integrated Camera not working, Lenovo Camera Settings does not Display

Hello, I have a new T530 with Windows 8 OS. I am having trouble using the integrated camera. It functions neither in the Windows camera app nor in Skype. In both cases I get a picture with a gray background and a camera with a line through it. In Device manager, the camera does appear, is enabled, and the drivers are up to date.
After looking through other threads, I tried checking whether the camera was plugged in and indeed it was. When using Skype and I set the camera to on (Skype did detect the camera), I still got the gray no camera image, but the green light on the camera itself turned on.
I also tried using Fn+F6 to check settings. Lenovo settings opens, but the when I click the camera settings Icon, the screen loads a blank page that says "Camera" in the top right and has a back button (left pointing arrow) in the top left hand corner. The back button does not seem to work and I must change the window to something else in order to exit/close settings.
I tried manually installing both camera drivers and "power management" ("energy management"?) drivers. Neither of this solved either of these issues.
Please help me to resolve this problem. Thank you.

Hi, euterpenc
I would make sure that the BIOS is up to date in the system. The current BIOS for your system is 2.07 and can be found here. Also, I would ensure that the chipset drivers are up to date, and those can be found here.
Hope it helps, and let me know how it goes
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

N500 4322 4BG integrated camera not work

Heloo!
I have a huge problem with my integrated camera on my new laptop. The system can`t recognize my camera. I install all drivers from lenovo site. I use instructions from this forum and everything else works just fine, except camera. Can someone help me with any idea for solvig this problem. My local technical Lenovo support can`t help me with advise yet. Is there any key hint?
Mare
Message Edited by B2soraya on 01-16-2009 03:03 AM
Message Edited by B2soraya on 01-16-2009 03:05 AM

Had the same problem, I thought. I'm explaining this without the notebook in front of me, so I may not be entirely accurate on the ketstokes.
Lenovo have change the way it works in Vista compared to XP.
The problem is that it doesn't show up in MyComputer or control panel as a scanner/camera.
If you check in control panel, system, devices, hardware, devices it should be shown with a driver from Vicom??
The camera works if you load "Lenovo Easy Camera" and then install the Roxio pack.
If you then choose to import a picture at the top left is a drop down box which defaults to file, but when selected gives you the option for the camera and then opens up a window showing yourself.
Hope that works.
Regards
TB
We are a reseller and I did phone Lenovo, but they hadn't got a clue!!!

Integrated camera not working windows 8 X201

I upgraded to Windows 8 some time ago and did not notice that my integrated camera is not recognized, the driver is not listed in the downloads for the laptop but states this is a Windows Inbox Driver. Where can I get the driver AND where in the device manager is it listed. Thanks.

I would not upgrade to Windows 8, lots of issues and the camera still does not work. It does work when I load Linux so its not the camera. I have tried everything, old drivers, new drivers. My wireless doesnt work either, not sure I'd get anothe Lenovo.

Integrated camera not working properly

Hej hej,
I just bought a new Thinkpad E540 laptop and my integrated camera was not working properly since the begining. I used Winodws 8 before, upadated it to 8.1, installed the last drivers (at least I think I did), but the problems stays the same. Camera is not working properly as it can clearly be seen from this picture:
Link to image
It used to work for few days froperly but only when using Windows Camera application, but never in skype or other applications, so it has to be software issue.
Thanks for your help.
Kind regards,
Matej
Moderator note: large image(s) converted to link(s): About Posting Pictures In The Forums

Lenovo has not yet released camera drivers for Windows 8.1. Below link gives list of camera drivers for Thinkpad E540. Select 'Camera and Card reader' and you get list of camera drivers.
http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-edge-laptops/thinkpad-edge-e5...
In this case, you need to downgrade your OS to Windows 8 or contact Lenovo service center for Windows 8.1 camera driver.

Samsung Integrated Camera not working with Skype

Hi,
I have a Samsung ES7000 series TV with an integrated camera. When using the Skype app, this initially works for approximately 1 minute but then a message appears on the TV saying “Connecting USB Camera and Mic”. This results in getting disconnected from the video call.
I have contacted Samsung on a number of occasions and after performing a number of checks without success to fix the problem, they suggested that this is probably a Skype app issue and I should contact Skype.
Could you please help resolve this issue?
Thanks.

Hi,
I wonder about the message, which is "Connecting USB Camera and Mic".
Did you have a software upgrade for TV?
At that time, did you unplug the power cable by force?
I recommend "please do a upgrade software of TV"
The upgrade is through the Network.
You can see the upgrade button at "Main Menu --> Support --> Software Upgrade --> Online".
IMPORTANT.
After upgrading TV, it will be automatically reboot.
Please, Don't power off until finishing upgrade by force.
I hope your success!!
Thanks.

Integrated camera not working

Hello everyone,
I have an issue with the integrated camera on my W530 running windows 7.
When I use google hangouts and under setting choose ' integrated camera' I get an image of a camera crossed out (apparently it's telling me I don't have a camera installed?)
When I use google hangouts and under setting choose 'Camera plus (VGA resulution maximum)' I get a black screen.
Any idea what could be causing this?
Why are there two options?
Yes I have reinstalled the newest drivers at least 5 different times.
Thanks!

Might also have to re-install the Communication Utility.
Or just make sure the Camera Mute service is disabled, but you won't be able to mute the webcam.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Thinkpad T530 Integrated Camera not working

Hi Folks,
I got my thinkpad T530 last week. I tested the skype after opening the box and it works. Then I took off the original 320G HDD and put my 830 SSD on it, reinstalled the win8 and blah blah blah.
Just last night when I tried to chat with my parents on skype i found out the the camera is dead. I tried by doing so:
1) according to others threads I uninstall most of the unnecessary drivers;
2) reinstall the camera driver;
3) deleted the ricoh media driver;
4) updated the BIOS;
5) tired to locate someone mentioned, the "privacy" problem. But the video/camera option is not even showing up by Fn+F6;
6) downloaded and installed the thirdparty AMCAM and it says no camera device can be found.
Please let me know if there is anything else i can do.
Thank you ,
Solved!
Go to Solution.

technically it's the same. I don't think there is a difference between t530 and e series.
Are you using win 8 or win7? for win8 it's a windows 8 app (after you pressing windows button..)

HP Touch Smart 310-1125f All-In-One - Win 7 64-bit - Web-cam not working

Just got this system and I can't figure out how to start the web-cam. I don't know if it's the hardware, software or just me being dumb. Thanks

Howdy Happy:
No you are not dumb nor is it cam or software issue. I have addressed this issue several times in the forum. Oh how I wish the HP Moderator will post resolved answer. You found the web-cam software thats a pluss. So I can skip that. Least you found it. Slide the web-cam icon up ward and in the middle of screen and tap it. This now opens web-cam software. Your camera shoud now be on look at the center top of your computer you should see the green light on. Bottom of web-cam sceen is your control for recording. Press capture to record video and press snap shot to take picture. Side bar is additional effects you can add to your picture or video tap on your choice. To replay your vedio or picture just tap on your choice. tap on the washer like icon von this is where you set web-cam timer settings and other stuff at. You should be all set now. It only can be excessed in HP Touchsmart software window.Carousel is rotated till you find web-cam icon. Version 3 software is located on bottom row icons slide bottom row until see web-cam icon. Slide Web-cam icon up and in center screen and tap it. Tap it again if you do not see capture button. All set now have fun.

Camera not working in T440

Web Camera is not working on my Thinkpad T440.
- Running Windows 8.1 pro (64 bit)
- Integrated Camera in enabled in BIOS
- Camera is NOT in Device manager: I do not see any "Camera Plus (VGA resolution maximum)" and "Intergrated camera") or Imaging Devices.
- The Drivers for the camera (version 1.0.0.10(GICP05WW) ) have trouble to get installed: at the end of the installation process, I receive an error mesage "No target module"
Please advise to resolve this issue and enable camera?

Hi Vink,
Welcome to Lenovo Community Forums!
I’m sorry to hear that webcam of your Lenovo ThinkPad T440 is not working properly.
Was the camera working fine before?
Check with running ThinkVantage system update utility application once and check.
Check with setting the BIOS to default option by pressing F9.
Is the system BIOS updated?
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Iphone 6 plus front camera not working in whatsapp

iphone 6 plus 64GB iOS 8.1 front camera not working in whatsapp

It seems the facetime camera does not work for whatsapp only it works normally.

Iphone 6 plus facetime camera not working after 8.1 upgrade

iphone 6 plus facetime camera not working after ios 8.1 upgrade, also while making calls the voice on the other side sounds distant. Any pointers.

It seems the facetime camera does not work for whatsapp only it works normally.

Isight camera not working after the last update

After reboot of the last OS update
Isight camera not working...
i've tried photobooth, ichat, skype and it doesn't show up anywhere. in fact, when i go to system profiler, it doesn't show isight under USB connections at all.
just to give you a recap of what i've tried so far:
* restarting (obviously)
* resetting PRAM/SMC (by booting it the way it was specified in the isight troubleshooting thing)
* just shutting down my computer and taking the battery out for several hours
any Help pls
because i mast to use it as soon as possible in a conference

*A few suggestions.........*
Try running repair permissions from your HD and afterwards run +repair disk+ from your software install DVD.
my isight camera is not working-not recognized with photo booth or ichat
To fix your iSight, shut down computer. Reboot in safe mode (press power button and then hold shift key down). After computer boots, restart again. Hopefully, your iSight will start working again.

T500 Win7 64 bit Integrated Camera Not Working

Similar Messages

Maybe you are looking for