T500 Windows 7 Enterprise Webcam only works in Lenovo Toolbox

I have a T500 running smoothly except integrated camera and finigerprint reader. I'm ok with fingerprint reader but I want to make my camera work atleast. My webcam , integrated camera only works in Lenovo toolbox but doesn't work on Yawcam, Yahoo or Skype. So far I tried Uninstalling the camera driver and software from programs and device manager. I reinstalled the driver downloaded from http://www-307.ibm.com/pc/support/site.wss/MIGR-70600.html I din't find any utility / program that show my webcam working except the Lenovo toolbox's hardware test. Any tricket other option to try ? - Sunil Parmar

sunilosuni wrote:
No luck with Fn+F6 .. it doesn't do anything ..
On Yahoo it says web cam is not connected. Although when you start first time the set up screen show that it's going to use Integrated Camera as your webcam but it doesn't work in the next screen with error saying it's not connected.
On Skype it says unexpected error.
- Sunil Parmar
If Fn-F6 doesn't work it means you don't have the latest hotkey driver installed (it is a new feature), which leads me to ask if you have the newest webcam driver installed?
Hotkey driver: http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-74261
webcam: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70600
Thinkpad T500-2081 CTO | T9400 2.53GHz | 8 GB RAM | ATI HD3650 + Intel GM45 | 15.4" LED WXGA+ | Windows 8 | ATI Catalyst 13.1 (non-switchable)
Thinkpad 390x | PII 333 | 256mb ram | NeoMagic 256AV | SVGA LCD | OS/2 v4.52

Similar Messages

Hd intel 4000 code 43 on windows 8.1 - It only works with an older driver version

Hi there I have an HP Pavilion Sleekbook 14 PC (HP Pavilion Ultrabook 14), with a 18FA motherboard - version 82.23, F.12 Bios, and a Intel(R) HD Graphics 4000. The graphic card only works with the 9.17.10.2932 (12/12/2012) driver, and everytime I try to update to a newer driver version, it shows the "Code 43" error. Does anyone knows how to update the drive and solve the "Code 43" error? Without solving this issue, I can't install the Windows 10. I've tried to update to Windows 10, but it doesn't run this old graphic display driver and it only gives me a blue screen, and if I install a new driver version, there it comes the "Code 43" error. Thank you, guys.

Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Pavilion14 Sleekbook and issues with the Drivers for Windows 8.1. If your computer is having problems finding and installing operating system updates, try using the Windows Update Troubleshooting tool to fix the problem.
I would be happy to assist if needed. How Do I Find My Model Number or Product Number?
Please let me know.
Thanks.

HP EliteBook 2740p Tablet PC Windows 8.1 Webcam not working

I have a problem getting the webcam working on Windows 8.1.
I have installed the latest versions of the webcam software and Youcam software. In youcam I can select the HP Webcam [2 MP Macro] as only driver. Youcam starts alright, but there is no video.
In the device manager all seems alright as well, no issues and the webcam is listed.
Can anyone help me out here? Is this a Windows 8.1 thing or do I need to install another driver?

Hello @MaltaCode
To get your issue more exposure I would suggest posting it in the commercial forums since the HP EliteBook 2740p is a commercial product. You can do this here Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE
The support page for your product may be helpful in the meantime: HP EliteBook 2740p Tablet PC.
I hope this helps!
Thank you for posting on the HP Forums.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Webcam *only* works in Skype

I've been trying to get skype working off and on which basically requires two things before I start: (1) internal mic; (2) webcam. I have not yet managed to get (1) working. However, (2) was working out-of-the-box. When I first tried it, I got a picture of me and I think the LED came on as well.
Now, the LED does not light up and I get a square of blackness in place of an image. This is using KDE's test facility in system settings. (I'm using this because it worked fine with this test before.)
I didn't have to do anything to get it working before but I figured that might have changed. So I started to work my way through the webcam wiki page but I've got a bit stuck.
I think that the relevant line from lsusb is:
Bus 002 Device 004: ID 064e:e285 Suyin Corp.
I couldn't find exactly this in the hardware lists for drivers but, since it worked before, I figure it must be one of the included drivers. Looking through the lists, uvcvideo seemed the most likely as that supports integrated webcams in similar laptops with ids starting 064e.
lsmod | grep video seems to confirm this:
uvcvideo 67853 0
videobuf2_vmalloc 2276 1 uvcvideo
videobuf2_memops 2182 1 videobuf2_vmalloc
videobuf2_core 20415 1 uvcvideo
videodev 83373 1 uvcvideo
v4l2_compat_ioctl32 8348 1 videodev
media 10469 2 videodev,uvcvideo
usbcore 146847 5 ehci_hcd,usbhid,btusb,uvcvideo
video 11243 1 i915
i2c_core 20593 6 drm,drm_kms_helper,i2c_algo_bit,i915,i2c_i801,videodev
Moreover, the device is created at /dev/video0 and the webcam shows up fine in KDE's list of multimedia devices. That also shows me it is using /dev/video0 and uvcvideo driver. Moreover, I can't find anything in the logs.
I'm a bit stuck because the wiki at this point pretty much assumes things are working and moves onto configuration. It doesn't say what to do if everything looks OK (device created, modules automatically loaded etc.) but you just get black and no LED.
Can anybody tell me if this should work or what I should look into next? The most relevant forum post I've found is https://bbs.archlinux.org/viewtopic.php?id=132774 but unfortunately the OP in that case didn't know what had fixed the problem. Google has not turned up anything useful or, rather, nothing which I recognise as useful which definitely is not the same thing...
Note that I do not know with which kernel I last tested the webcam successfully - I just know it was working "a while ago" and isn't now.
EDIT: Forgot to mention that I am in the video group and that the permissions on /dev/video0 are:
crw-rw----+ 1 root video 81, 0 Apr 29 00:50 /dev/video0
getfacl: Removing leading '/' from absolute path names
# file: dev/video0
# owner: root
# group: video
user::rw-
user:<me>:rw-
group::rw-
mask::rw-
other::---
EDIT 2: I just realised that the output of lsmod | grep v4l in the post I linked looks rather different from mine. The output there includes lines for v4l2_common, videodev and i2c_core whereas I get only one line for a 32 bit compatibility module:
v4l2_compat_ioctl32 8348 1 videodev
I don't know if this is just because things have changed in later kernels or if this is a clue as to what might be wrong.
EDIT 3: Really confused now. It turns out the camera works in Skype complete with LED, picture etc. So I now have the camera working in Skype (which I can't use because I can't figure the mic out) but not elsewhere.
I assume this has something to do with the fact that Skype is 32bit? Is it possible to get the camera working generally in 64bit and 32bit applications (assuming that really is the problem)?
Last edited by cfr (2012-04-30 01:31:17)

ruwim wrote:
Please, run the DirectX diagnostics tool (32-bit version).
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.
dxdiag atttached.
Attachments:
DxDiag.zip ‏10 KB

MDT - Custom Reference Image does not work with Task Sequence, normal Windows 7 Enterprise Iso media works fine.

Hi,
Our MDT server is acting strange!
I have previously had this system running without problem - i could both capture and deploy computers as is and no changes have been made to mdt.
But my latest capture does not work. When i capture my reference maching in my VM environment it completes without errors and i can import the latest wim file.
When i deploy the tast sequence, it install the custom Wim image, but it ends up with "login" screen as the administrator i have entered for the capture/deploy sequence, but it goes to stop at this point and applications is not installed.
If i change the ISO in the task sequence under Install OS step, to a clean Win7 install media then the capture completes and install applications.
I have also tried to:
Capture reference without password
Capture reference without Windows updates
Customsettings.ini, bootstrap, BDD.log and SMSTS.log to be found here: https://onedrive.live.com/redir?resid=ED5029A20300B814!365&authkey=!AALV1b2ubD0laEE&ithint=folder%2cini
Hope you will be able to assist,
Regards,
Anders

if you have noticed your smsts.log, there is same error multiple -
Executing in non SMS standalone mode. Ignoring send a task execution status message request
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
User did not specify local data drive TSManager
1/23/2015 12:50:37 PM 1656 (0x0678)
Volume A:\ is not a fixed hard drive TSManager
1/23/2015 12:50:37 PM 1656 (0x0678)
Volume D:\ is not a fixed hard drive TSManager
1/23/2015 12:50:37 PM 1656 (0x0678)
Volume X:\ is not a fixed hard drive TSManager
1/23/2015 12:50:37 PM 1656 (0x0678)
Volume Z:\ is not a fixed hard drive TSManager
1/23/2015 12:50:37 PM 1656 (0x0678)
TSM root drive = TSManager
1/23/2015 12:50:37 PM 1656 (0x0678)
We do not find an available volume to store the local data path
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Set a global environment variable _SMSTSNextInstructionPointer=1
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Set a TS execution environment variable _SMSTSNextInstructionPointer=1
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Set a global environment variable _SMSTSInstructionStackString=0
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Set a TS execution environment variable _SMSTSInstructionStackString=0
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Save the current environment block TSManager
1/23/2015 12:50:37 PM 1656 (0x0678)
pszPath[0] != L'\0', HRESULT=80070057 (c:\qfe\nts_sms_fre\sms\framework\core\ccmcore\path.cpp,58)
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Filesystem::Path::Add(sEnvPath, EnvDataFileName, sEnvPath), HRESULT=80070057 (e:\nts_sms_fre\sms\framework\tscore\environmentlib.cpp,639)
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Failed to save environment to (80070057)
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
TS::Environment::SharedEnvironment.saveEnvironment(szPath), HRESULT=80070057 (e:\nts_sms_fre\sms\client\tasksequence\executionengine\executionenv.cxx,842)
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Failed to save the current environment block. This is usually caused by a problem with the program. Please check the Microsoft Knowledge Base to determine if this is a known issue or contact Microsoft Support Services for further assistance.
The parameter is incorrect. (Error: 80070057; Source: Windows)
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
SaveEnvironment(), HRESULT=80070057 (e:\nts_sms_fre\sms\client\tasksequence\executionengine\executionenv.cxx,420)
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Failed to persist execution state. Error 0x(80070057)
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Failed to save execution state and environment to local hard disk
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Start executing an instruciton. Instruction name: Gather local only. Instruction pointer: 1
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Set a global environment variable _SMSTSCurrentActionName=Gather local only
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Set a global environment variable _SMSTSNextInstructionPointer=1
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
what about the mass storage driver in your boot image, is it updated?
Md.Waseem Please remember to click “Mark as Answer” on the post that helps you. Thank you.

T510: Can't load Windows 7, Keeps rebooting only works in safe mode

Trying to get my T510 up and running after my W520 went DOA after a bios update. When i power on the laptop it tries to load Windows 7 then goes into a rebooting loop. I can get into safe mode with networking just fine without issues, so i figured it was a display driver problem. In safe mode I unstalled the Nvidia drivers and tried to reboot but still got the same issue. I went into the BIOS to see if I could disable optimus and use just the intel GPU, but I don't even see a setting for disabling it or reference to the NVidia GPU at all. I'm positive it was there before.
I've swapped hard drives and memory modules out. Even tried to do a fresh install of Windows and it still won't load. I'm out of ideas. Any help would be greatly appreciated. Thanks.

Try and applied the machine updated in Safe mode. It usually works. If your install is from MS DVD then be sure all the foundation software is installed. Chipset tool especially and build from there.
You could also run the memory diagnostic after booting from the MS Windows 7 DVD. Eliminate a bad memory module. (If you have two) take the first on out and move the second one into the first slot. See if its stable, remove and insert the other SODIM into the first slot. Why, normal mode is very intense on RAM and also address a lot more memory.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

Windows 7 Setup won't work on Lenovo B560

My Lenovo B560 Laptop was slow to a point it would crash a few minutes after login, and after restarting one day it would blue screen when I tried to start it up in safe mode, last known good configuration and startup repair. Everytime I would boot to my Windows 7 install disc for Lenovo it would get to the Disc Partition select screen and just stay there loading. I had my hard drive taken out and reformatted and when trying to install windows 7 again, it gets to the Disc Partition select screen and just stays there loading. This screen only loaded once, and it got to the unloading windows files and stayed there. How do I get the setup to go all the way through?

Your hdd may be in trouble,please check the state of your hdd by using and of the hdd diagnostic tools(bootable ones should help)
http://support.lenovo.com/en_US/detail.page?LegacyDocID=LENV-DIAGS#boot
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

My ipod only works when its being charged!

my ipod only works when its charged. when i unplug it the screen slowly fades out and i can no longer turn it on. and when i connect it to the computer it doesnt even connect! can someone please help me???!!!!
ipod video Windows XP

"my ipod only works when its charged."
Then it sounds like a battery problem.
Try these.
My iPod won't turn on.
iPod has no power and appears frozen.
iPod battery doesn't charge.
If none of the above help, then it may be an issue that requires service.
You can arrange online service here.
Service request.
Or if an Apple store is near you, take it there and have them check your iPod.

CoCreateInstance returns 0x8007007e (Module could not be found) for the first call only at system startup on Windows 2008 Enterprise SP2

Hi Guys,
I'm experiencing a problem with CoCreateInstance, where it returns error 0x8007007e.
The code is something like this:
HRESULT hRes = S_OK;
CComPtr<IMyInterface> spObj;
if(FAILED(CoInitialize(NULL))) { /* quit */ }while(FAILED(hRes = spObj.CoCreateInstance(CLDIS_MyClass, NULL, CLSCTX_LOCAL_SERVER)))
// LogFailure(hRes);
Sleep(10);
The problems occurs only on a single machine having Windows 2008 Enterprise SP2 installed (it works fine on other machines / OS versions). It happens only during the system startup (this is a Windows Service) and only for the first call of the CoCreateInstance.
The second call always succeeds.
The problem does not occurr when starting the service manually from Services.
I did some investigation using Process Monitor and found that the HKCR\CLSID\[CLSID of MyClass]\LocalServer32!LocalServer32 registry value is accessed before the failure. The registry value exists - it is added by the Windows Installer during
installation.
If I remove the registry value then the CoCreateInstance always succeeds.
I've been trying to lookup for some documentation on HKCR\CLSID\...\LocalServer32!LocalServer32 but haven't found anything useful other than it's a "Windows Installer Entrypoint". I assume that the Windows Installer does some integrity checks when
calling CoCreateInstance for such class and this fails for some reason but currently I fail to find the reason.
Can anyone help finding out what's the root cause of the 0x8007007e error here, please? Any help or tip is much appreciated.
Many thanks!
Marcin.

Hi Marcin,
This forum is mainly for talk about the product use related issue and not the best place to talk about the develop issue, for the develop issue we can post in MSDN forum for
the further help and your issue may need capture a dump then for the further analysis it is not an efficient way to work in this community since we may need more resources which is not appropriate to handle in the community. I‘d like to suggest that you submit
a service request to MS Professional tech support service so that a dedicated Support Professional can further assist with this request.
MSDN forum
https://social.msdn.microsoft.com/Forums/en-US/home
Please visit the below link to see the various paid support options that are available to better meet your needs.
http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
Thanks for your understanding and support.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

32-bit Application stops working on Windows 7 Enterprise machine after Windows is restarted

Hello,
We have a legacy 32-bit application that we distribute that was built with Microsoft's Visual Basic 6.0. I have installed this application on many versions of Windows up to and including Windows 8.1 with no issues.
Recently we provided the application to one of our end users who is running Windows 7 Enterprise on multiple laptops. They are able to install the application and run it without issues until the machine is restarted. After the machine is restarted
the icon for the application changes to the standard Windows EXE icon and when they attempt to start the application they get the Windows message box: "The version of this application is not compatible with the version of Windows you're running....".
From the research I have done, this error would only apply to trying to run a 16-bit application or if you are trying to run a 64-bit application on a 32-bit version of Windows, neither of which is the case here.
It also quite odd that they are able to install and run the application with no issues until Windows is restarted, and this has been verified on multiple of their machines. The icon change is also quite odd.
If anyone can provide any information regarding this issue it would be greatly appreciated.
Thank you.

Hi,
Have you checked this page?
Help with Windows 7 compatibility problems
The following steps can help you with programs that aren't working properly:
Step 1: Find software updates from the program manufacturer.
Step 2: Try re-installing the program by following the steps in
Install a program.
Step 3: Follow the steps in Make older programs run in this version of Windows.
Step 4: Try running the program using Windows XP Mode. Get more information in
Install and use Windows XP Mode.
Best regards
Michael Shao
TechNet Community Support

Vivtar Webcam driver problem in Windows 7 Enterprise x64

Hi all, I had not long purchased a Vivitar DVR 708HD Camcorder and the camera itself is rather poor, but I was impressed with it's webcam function back when I had it working on a different computer. I'm not an amature as I'm usually quite good at finding
device drivers as I did a lot of manual driver installations in Windows 98 and 95 but this one as stumped me. The even more annoying thing is, I have lost the OEM disk for the camera (although, I wasn't entitrely sure if it contained a device driver for it)
and I have got it to work once but that was in Windows 7 Ultimate x86. Now my computer is running a 64 bit version of Windows (Windows 7 Enterprise to be precise, as described in the title) and I know some drivers do not like running in 64 bit if they are
not native to them but I was wondering if anybody possibly knows how to sort this. If it is a compatibility issue with 64 bit operating systems then so be it but I was hoping somebody could assist me with this and possibly find a driver solution to work this
camera.
If you need the Hardware Identifications here they are:
USB\VID_04FC&PID_1628&REV_0100&MI_02
USB\VID_04FC&PID_1628&MI_02
I suppose it could also be possible that Vivitar features a different type of Firmware for this cameras I'm not sure but good luck if you can help!
-Matthew

64-bit Windows requires 64-bit drivers.
You will have to contact Vivitar for assistance with your problem. Vivitar has sole responsibility for support of their products.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Windows 7 Prof / X300 embedded webcam not working

Hi community,
I am running Windows 7 on my Thinkpad X300 since Microsoft released Windows 7 Beta. At the beginning, there was quite some trouble with many drivers, but the embedded webcam driver was working well though. When upgrading to Windows 7 RC, a couple of updates have been released in the meantime, so more IBM/Lenovo software was working well.
Right now, I am running Windows 7 Professional, downloaded all recent driver updates and reinstalled them. Everything is working fine now - except the power management and the embedded webcam. The former is not important for me right now, but the latter one even more. Unfortunately, it is not working at all. It is regularly mentioned in the section "imaging devices" of the device manager without any error. I was using the driver "7tca21ww.exe" for the webcam.
However, when trying to use Skype, there is only a blank screen in the webcam preview window. In another thread, http://forums.lenovo.com/t5/Windows-7-RTM-Discussion/Windows-7-Webcam-driver/m-p/155292, there was a tool mentioned called AMCap, but it is also not working though (terminates evoking the error message "Unable to render the video preview stream - the parameter is incorrect. [0x80070057 / 11878]. Also in another thread, this driver http://www-307.ibm.com/pc/support/site.wss/MIGR-66973.html was noticed to be working. Unfortunately, this not working neither.
Any advice on this issue is very much appreciated.

Hello.
Lenovo is releasing official Windows 7 updates on a daily basis. I think you'll find the correct driver at this link. Obviously if it fails to work I can only speculate. Good luck.
Link to x300 drivers.....

I have an Iad2 and ever since ios6-there are issues.I get occasional lock-ups and have to reboot. The WSJ app freezes when running their videos to the end. The only work-around is to stop the video before it's over. Worse than windows me !!!!!

My Ipad2 worked perfectly before ios6 upgrade. It now freezes occasionally and I have to reboot to get it to work. Also the WSJ app will now freeze if I try and run one of their videos that is imbedded in the article. My only work-around is to stop (press done) before the end of the video or I have to do a total reboot. The problems remind me of Windows ME . Will Apple resolve these issues or become more like Microsoft. Hopefully there will be a restore button in the future like Microsoft was forced to do because a lot of upgrades are just terrible. Am I crazy or are there other people having the same issues with ios6, or could this just be a coincidence and my ipad2 is starting to fail just when ios6 arrives ?

I know this will not help but, the bluetooth headset I purchased for my wife works great and it pairs with our car and our sound bar in the livingroom (Motorola Droid Razr) 98.72.16.XT912.Verizon.en.US
However I did not upgrade over the air but from a android web site and placed it on my external sd card. I believe this made the difference in why we had no issues and upgraded functionality has been great.
Please note when I mention these bluetooth devices I mean the Razr connects with no problems.
It also had no internet issues and none of the problems others have complained about in other threads.
unfortunately when you say thousands have these issues I cannot say that is accurate. The hope is when large numbers of owners have updated to the Jelly Bean and are complaining inmase then Motorola will issue a patch to verizon to get out to the affected users.
Of course now that Google owns Motorola Mobility and has laid off loads of workers it may never issue an os patch.

ITunes v11.1 has stopped working on Windows 7 Enterprise 64bit

Hi to all. I have brand new Dell's Latitude E6540 laptop with Windows 7 Enterprise edition 64bit. I downloaded the newest iTunes v11.1 and installed (Run as Administrator) it on my new laptop. After I start iTunes in less then minute the small windows pops-up saying "iTunes has stopped working. Here is copy of error:
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    iTunes.exe
Application Version:    11.1.0.126
Application Timestamp:    52394b24
Fault Module Name:    KERNELBASE.dll
Fault Module Version:    6.1.7601.18229
Fault Module Timestamp:    51fb1116
Exception Code:    c06d007e
Exception Offset:    0000c41f
OS Version:    6.1.7601.2.1.0.256.4
Locale ID:    1033
Additional Information 1:    0a9e
Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
Additional Information 3:    0a9e
Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
So, what is the fix for that Itunes problem? Thanks for help. vpanov

Try copying the QTMovieWin.dll in the c:\program files (x86)\common files\apple\apple application support folder to the c:\program files (x86)\iTunes folder. I had same problem and it's fixed this bug.

Since I upgraded Windows Vista to Windows 7 iTunes only works in Windows 7 "Safe Mode".

Since I upgraded Windows Vista to Windows 7 iTunes only works in Windows 7 "Safe Mode". it will not run in the normal mode. (It ran properly in Vista) I spent several hours with the Microsoft Technician going through the "1717 suggestions, but to no avail. On my own, I tried iTunes in Windows 7 "Safe Mode" and was successful! It ran like a charm. Unfortunately, I can't run iTunes properly in "Safe Mode" I have not tried moving one set of the files yet. But if iTunes works in Safe Mode, do I need to relocate anything or do I need to find what is causing the conflict between Windows 7 and iTunes?

Which Satellite A205?
Which Windows 7 (64-bit)? What about the other laptop?
Which printer model, version, and so forth?
-Jerry

T500 Windows 7 Enterprise Webcam only works in Lenovo Toolbox

Similar Messages

Maybe you are looking for