T500 with Windows 7 64bit upgraded to ADATA SSD S599 (SandForce) BSOD after wake up

Hello
I have just upgraded my T500 with the ADATA SSD S599 (SandForce based) and it gets real performance boost.
Everything works fine except Sleep mode, specifically waking up: when I open the lid to recover from the sleep mode I got the Blue Screen of Death most of the time.
Tried with Microsoft built-in AHCI driver as well as Intel drivers (from Lenovo drivers page)
Installed all the newest drivers from Lenovo's site. Hibernation works without problem.
Debugging memory.dmp show paging pool related problems, sometimes referring to hard disk problem.
Found on OCZ forum that Sand Force based disks (for example: Vertex 2) may behave similary.
Can anyone confirm if such a disks works well in T500 with 64 bit windows 7?
Thank you.

ADATA SSD S599 is supported in Windows 7 x64.
Go to
http://www-307.ibm.com/pc/support/site.wss/migr-70443.html
and try to install every hotfix for T500. (and update firmware and drivers if possible.. )

Similar Messages

Director MX 2004 compatibility with Windows 64Bit

Hello
I'm buying a new desktop system and I was asked in the shop
if I wanted windows xp with 32bit or 64bit. Yes, I opted for xp
instead of Vista.
I'm just wondering if Director MX 2004 is fully compatible
with the 64bit version? Or, are there any issues I should be wary
about.
The guy in the shop recommended the 64bit since the RAM could
be upgraded more.
Any feedback appreciated. Sorry if this is not LINGO related.
Andy

HTML is HTML. The product you use doesn't matter much except in terms of "ease of use" and quality of code it generates. MX is a dinosaur. Depending on how you built your sites with it, you may need to update your code to modern web standards. But your site's code will remain editable in any version of DW.
That said, a LOT has changed in 10 years. So if you don't have really strong coding skills in HTML and CSS, you will struggle with newer versions of DW. The interface is different, too, so it will take some adjustment.
CS6 is the only version you can still purchase.
Creative Suite 6
All the rest are available only through subscription to the Creative Cloud.
Creative Cloud pricing and membership plans | Adobe Creative Cloud
Nancy O.

Vista with Windows 7 upgrade

If I get a Windows 7 upgrade disk and install it over my current Vista, and then upgrade to Lion, what will I have to do if I ever need to reinstall Windows 7 since I will only have it as an upgrade disk? I don't want to buy a full version for the one thing I need it for. Any help is appreciated. Thanx In Advance!!!

OK, here come the details:
Scenario 1: Vista works, Boot Camp 3.x is running with no issues, and you have SL or Lion on the Mac side.
A reminder: If you already had a Boot Camp Volume, do not repartition it or you will lose data!
If you have Vista and have not yet upgraded to 7, do nothing on the Windows slice of your hard drive at this time.
In Lion, run the Boot Camp Assistant and select the option to make a CD with drivers. This should fetch Boot Camp 4.0 from Apple's servers. Quit the Assistant when done burning the disc--we'll use it *after* the upgrade..
Now, in Windows:
Follow the instructions in this article to prevent the Win 7 installer from crashing The utility linked there turns off Windows' ability to see the Mac volume.
Make sure you have a valid upgrade edition of 7, which also matches your current Vista's architecture (32 or 64-bit) Generally, use the same "flavor" of 7 as your Vista is now. Ultimate trumps all, but few really need it
Insert the 7 upgrade disc, and run Setup from inside Vista.
Specify an Upgrade install.
Wait patiently while Windows performs the upgrade
Complete the first-run setup and activate Win 7
Get your Boot Camp 4 disc, and insert it to begin the Boot Camp update Access to the Mac volume should be restored as Boot Camp restarts.
Scenario 2: You can't install Vista first for whatever reason, or you are crossing architectures from 32-bit to 64-bit or the reverse
Insert your Win 7 upgrade
Restart the Mac with the Win 7 DVD in the DVD drive. As the tone sounds, hold "C"
Step through Windows Setup and perform a Custom install until you get to the partitioning screen. Select "Drive options" here.
Select the partition which was set for Boot Camp. Click Format.
Continue with Setup and load Win 7. You'll get asked for your product key, but you should skip this entry while setting up the OS--this first install isn't meant to last long, as it will be "upgraded"
Eject the disc via My Computer--the eject key doesn't work yet!
Install Boot Camp 4 as above
Now, run the Setup from inside Win 7. This time, do an Upgrade as per Scenario 1 above.
Good luck,
Nate

NVIDIA GeForce 6150SE nForce 430 is incompatible with windows 10 upgrade message

My system is incompatible with the new windows 10 upgrade. Get the following message "NVIDIA GeForce 6150SE nForce 430 , The display manufacturer hasn't amde your display compatible with windows. check with the manufacturer for support

It's true that card isn't compatible with Windows 10 and from my research it will never be compatitble. You can still upgrade to Windows 10 though Microsofts website though and follow my work around below. http://www.microsoft.com/en-us/software-download/windows10 Once you upgrade you'll notice your screens resolution will be screwed up atleast it was for me. Thats because it's using the generic Windows display driver since the driver for the graphics card isn't compatible. There is a way to get around it though. I will warn you now it's not perfect since the driver I'm linking is for Windows 8.1. Your icons on your desktop and in the taskbar will refresh every couple minutes. But you will be able to set your computer to the correct resolution. So it's kind of a tradeoff. Here's the link to the driver you'll need http://www.geforce.com/drivers/results/56378 So far so good besides the refreshing icons. Edit: The icons stopped refreshing and no other issues.

HELP! windows 64bit upgrade & rescue and restore option

I recently bought a W510 with Windows 7 Prof 32bit. Then, I used a seperate Windows 7 Prof 64bit to boot from the disc and installed 64bit Windows 7. My questions are,
Is there a way to save an image of my current setting of 64bit Windows at the Q partition?(which strangely have changed its name to D partition after 64bit was installed.)
What is the best way to save the current image if hidden partition can not be used? (I want to be able to format and install my windows every now and then without going through the hassel)
Should I delete Q partition is it is no longer needed? (if it can only restore to 32bit and if I no longer plan to use 32bit?)
Thank you in advance for your reply!

if you plan no longer to use recovery system and 32 bit operation system, you can delete the hidden partition.
as i read somewhere in the forum, you can update hidden partition.
but let me ask you this, after installation 64 bit, hidden partition became visible?

Graphics not compatible with windows 10 upgrade

I have a HP mini 210_4020TU. I have reserved windows 10 upgrade but it says my graphic card is not compatible. Please take a look and kindly help. also let me know if i am eligible for upgrade

Hi!, mini210_4020TU: Welcome, to Forum !. Please, check ... http://windows.microsoft.com/es-ar/internet-explorer/ie-system-requirements#ie=ie-11

How can I use my photoshop elements 10 with windows 8 upgrade

How can I use my photoshop elements 10 with my windows 8 uograde

All versions of PSE except versions 1, 3, 5 & 6 will work with Windows 8.
Microsoft Windows 8 compatibility.

Printer, CP4025, stopped working with Windows 10 upgrade

When I did my Windows 10 upgrade my Printer, CP4025, stopped working. I tried deleteing and added, wouldn't work.So i went back to Windows 7 because I have to be able to print today. But it still will not work. Now it will not add, getting a message saying "the folder you specified doesn't contain driver software for your device". Yes, I am using the disk to try and do this. HELP!!!! I am an old lady and if you go too techincal I will just be further confused.

You may need the AMD chipset driver for that one. Select the first one listed.http://support.amd.com/us/gpudownload/windows/Pages/raid_windows.aspx

Window 10 upgrade. Graphics driver not working even after re-install

Notebook pavilion DV6 3280. Just upgraded to Windows 10 and AMD graphics driver not working even after re-install. What do I do? Is there another driver not on the HP Website that I should try?

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Windows Vista with Windows 7 Upgrade on Boot Camp 4.0.1. Is it possible??

Hello everyone,
I own a genuine full installation Windows Vista and a genuine upgrade to Windows 7. I'd like to install these ( i.e. install Vista and then upgrade to 7) on a MacBookPro running on OSX Lion 10.7.2 with Boot Camp 4.0.1. Is It possible???

Try the Bootcamp forum: http://discussions.apple.com/category.jspa?categoryID=237

Problems F3507f Broadband Device on T500 with Windows 7 64-bit

Hi,
I have installed Windows 7 64-bit on my T500 (model 2082-8WG). I dont get my Broadband Device working.
In Access Connections the Device is turned OFF and I cannot turn it on. Strange is that the lights on the laptops indicate that de Broadband device is turned on (together with WLAN and Bluetooth).
I installed all latest drivers (also the AT&T/Vodafone HSPA driver) and BIOS. When I start Mobile Broadband Connect i get the message "no Wireless Mobile Broadband device found".
Does somebody have a clue, or is someone familiar with this problem?
Regards,
Edwin de Jong

In the meanwhile Rev 04 of the driver was published. This version is binary different to Rev 03 and - surprise - it now says correctly after unpacking it will install the 64-bit version. But after that same problem as before, "no compatible device found".
I did some searching into the files of 6md647ww. I guess the file Display.Driver\NVLT.inf contains a list of compatible devices - in this file the sections labelled NVIDIA_SetA_Devices.NTamd64.* list a lot of device-ids, for example PCI\VEN_10DE&DEV_0A3C&SUBSYS_214517AA and many more. The device id of the graphics card for a system can be found in the hardware/device manager of windows, I obtained that for my card and this id doesn't show anywhere in NVLT.inf. So if my guess is correct, it is no wonder the installer says "no compatible device" since the device id of my card is not listed in NVLT.inf.
Please note again that all previous versions of lenovo drivers for my NVIDIA Quadro FX 3800M did and do install without absolutely any problem!
This is strange, readme of the current driver version definitely says NVIDIA Quadro FX 3800M is supported by this driver, but the driver doesn't seem to contain the device id for it. Looks almost like the wrong driver was used / bundled into 6md647ww.
And again the question to the board / administrators if lenovo technical support is reading here and is there another contact at lenovo where I could direct my problem to? I am still having the sporadic heavy crash issue which is very dangerous since it can happen any time if displaying whatever graphics in whatever software and which therefore has a high risk of data loss. Also, installing the plain NVIDIA driver directly in the current version still has the problem of flickering and color errors, so this isn't a solution either.
Best regards, Michael

Verisoft Biosrypt access manager not working with Windows 7 upgrade?

Hi
I really liked my Bioscribe features on my Pavillion Tablet tx1240ca.... and since I upgraded to windows 7 I cant get it working anymore? Please help?

Hi and Welcome to the Community!
I suggest this thread:
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Boot Camp Services allegedly interfering with Windows 7 upgrade installer

The MS Windows 'upgrade advisor' analyzes my Vista install & says I'm good to go with an upgrade, onto my Boot Camp partition, from Vista 32 bit to W-7 32-bit - - - -
BUT..... when, after booting up in Vista, I try to run the W-7 installer program the following happens:
1) starts off immediately copying needed files and trying to create temp folders and then aborts with a a Microsoft error message Code 0x80070005 - "unable to create a required installation folder."
It is said, on credible Microsoft help forums like this one, that this is a known issue with Boot Camp not supporting W7, but the workaround some people have apparently tried quite successfully is to run the Vista uninstaller and REMOVE -"Boot Camp Services" from the boot camp volume; THEN,//////install the W-7 upgrade normally; then go back to the Leopard install DVD and reinstall BootCamp Services. Can this be done ? Should it work just that simply ?
I am leery and cautious about trying this without assurances from more experienced Mac guys that it should not cause me any serious issues I'd regret creating.
IS Apple aware of this issue and do they have a suggested fix ? Are they working on a solution ?

You must be using the Win7 upgrade software. I ran into the same problem. Here's what you can try. First, run the upgrade software application and let it extract all the files to your Windows drive. The installer will then fail, but you will have a folder on your drive that contains the upgrader's content. Burn the contents of that folder (not the folder itself) to a DVD. Then restart Windows and delete the upgrader folder. Now insert the DVD you made and navigate to it. Double-click on the Startup application. The updater should now work. I had the option to upgrade my existing system or archive the existing system and do a clean install Win7. I had nothing to save so i opted for the clean install. I've tried this twice so far, and it has worked for me.

HDMI no sound with Windows 7 upgrade

I am unable to get sound with HDMI , but visual is working, after upgrading from Vista to Windows 7. G70 series laptop, s/n 2CE92870KS.
Under control panel/device manager/display adapters, what is listed is mobile intel (r) 4 series express chipset family.
Under control panel/device manager/sound video games, what is listed is coexant high definition smart audio 221 and intel high definition audio hdmi.
Under control panel/sound/playback, what is listed is coexant high definition smart audio 221.
I am floundering greatly trying to figure out why the intel high definition audio hdmi is not listed under sound/playback. I would greatly appreciate any help. Thanks

Hi Jim,
Try this to see if it helps. Download the Chipset driver and Graphics driver on the links below and save the installers to your Desktop.
Chipset
Graphics Driver
Next, in Device Manager, open Display Adapters, right click on the Intel graphics chip and select Properties. Click the Driver tab and then select uninstall. When done, do the same for the for the Intel High Definition Audio Codec found under Sound Video and Game Controllers.
Now return to the Desktop and install the Chipset driver and then the Graphics driver. When complete, reboot the PC and see if this has helped. Check in Device Manager that both the Intel Graphics and the Intel Hi Definition Audio codec have reinstalled successfully and whether you now see the HDMI Audio option under playback devices ( found in Control Panel, Sound ) as shown as the top option on the screenshot below ( ignore the fact that it's ATI, i just mean the TV icon option ).
http://s175.photobucket.com/albums/w146/rproffitt2000/?action=view&current=7Speakers.png&newest=1
If it shows up correctly, try the HDMI connection and see if it now functions properly.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Problem with windows 7 Upgrade website

Hi, I recently purchased a Thinkpad t400 with vista installed in it. I am eligible for free upgrade to windows 7.
But when I try to click on "Request Upgrade" button in "https://ebiz3.mentormediacorp.com/LenovoWindows7Upgrade/Select_Lan.aspx", my web browsers (both IE and firefox) warned me saying the web site is untrusted (the cetrificate is not verified.).
Could you please guide me with proper links?
-Satya

satyabodharao wrote:
But when I try to click on "Request Upgrade" button in "https://ebiz3.mentormediacorp.com/LenovoWindows7Upgrade/Select_Lan.aspx", my web browsers (both IE and firefox) warned me saying the web site is untrusted (the cetrificate is not verified.).
Welcome to the forum!
That is the company that is handling the upgrade orders, and the link doesn't raise any red flags here with my copies of IE7 or Chrome.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Jane
2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
I am not a Lenovo Employee.
I AM one of those crazy ThinkPad zealots!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

T500 with Windows 7 64bit upgraded to ADATA SSD S599 (SandForce) BSOD after wake up

Similar Messages

Maybe you are looking for