T510 4384-DS9 Optimus Enabled?

Hello all,
Sorry I must miss the statutory introduction, I have searched for an answer in the Lenovo technical documents and I want to be proven wrong...
I was originally under the impression that my laptop (Thinkpad T510 4384-DS9) had NVIDIA Optimus display technology, however, I cannot find any OPTIMUS options in the BIOS under display (or any other section for that matter).
The reason I would like to know is that I have recently purchased a docking station (model: 4338) and 3 external monitors which I would like to use simultaneously.
Forgetting the fact that I'm using Linux, and that for most people this wouldn’t be a challenge worth undertaking, I would just like to know if my system actually supports 3 external monitors and the laptop screen concurrently using the docking station.
If there is anyone on here who could clarify the situation for me that would be most appreciated!
Thank you
PS.
Originally I found this document which allowed me to go ahead and purchase the equipment:
http://support.lenovo.com/gb/en/documents/ht037605
Solved!
Go to Solution.

It's a common misconception. Having an Nvidia card doesn't mean you have Optimus
From top of my mind T510 came with these graphics options
Intel only
Nvidia 3100M only 
Switchable Graphics [Intel + Nvidia] (IIRC you need to manually switch the graphis card using the Power Management, as in the T/W500 series)
Optimus [Intel + Nvidia] Software would pick which one to use, additionally you could switch in BIOS between Optimus, Nvidia or Intel
According to your MTM you have option 2
/L40SX/240/240X/2*340CSE/360PE/365XD/380D/380E/380XD/380Z/390/560E/560X/2*570/2*600/600E/750Cs/755C/760CD/760EL/760XD/770E/A20p/A22p
A31/i1600/G40/R50p/R61i/S30/SL510/2*T22/4*T4x/11*T6x/6*T4x0x/6*T5x0/3*W5x0/W700/3*X2x/4*X3x/3*X4x/5*X6x/3*X6xT/10*X2xx/2*X200T/4*X30x/Z60m/3*Z61x
Comunidad en Español  English Community  Deutsche Community   Русскоязычное Сообщество

Similar Messages

  • T510 with nVidia 3100M Optimus - not switching

    Just received the above mentioned PC and I was trying to test out the switching capability of the Optimus technology.  However, I can't seem to get it to switch.  I have a game inside Steam and through the nVidia control panel I have set Steam to work with the discrete cart, but it never switches.  This is evident because I've started up a game with Optimus enabled versus entering the BIOS and explicitly choosing the discrete card and it makes a world of difference.
    Is there another application I could use to test out the switching capability (I read a previous message about Steam possibly not working).  Or is there any way to explicitly switch the cards within the OS?  I am looking for a way to verify this technology works.
    -john

    That would be beautiful, except that it wasn't switching automatically in certain cases.  In particular, Steam was having an issue.
    I made some headway though.  Basically, I updated the drivers for the nVidia chip by going to this page:
    http://www.nvidia.com/object/notebook_drivers.html
    And having them scan my system.  You have to allow them to use an ActiveX control (hint: use 32-bit IE for this).  This resulted in two options, one for the 3100M and one for the Intel chip.  I chose the 3100M download (version 2.67 from 3/24/2011) and installed it.
    The first thing I noticed is the nVidia control panel had a lot more configured apps.  Also, on the preview pane, I actually saw the spinning nVidia 3D logo whereas before it wasn't showing up in Optimus mode.  I was able to see the switching happen via this utility:
    http://forums.laptopvideo2go.com/topic/26992-optim​us-test-tools-finally-in-users-hands/
    I was a little worried downloading at first, but it seemed to work fine.  Anyway, you can play around with various applications and watch the switch happen.
    Unfortunately, my game through Steam still crashed out, but it got a lot further after the driver update.  I've seen a lot of other people have problems with this particular game (Civ 5) using optimus, so I'll just chalk it up to the game for now.  It plays fine if I explicitly set the discrete chip in the BIOS which I can live with. 
    My next step will be to test other games to make sure it truly is game specific.  Hope this helps people having the same problem.

  • NVIDIA Optimus Display Driver for Windows 7 (64-bit) - ThinkPad

    The display driver available at http://support.lenovo.com/us/en/downloads/ds029106 is advertised as being version 9.18.13.3302 / 8.15.10.2725, released on 5/20/2014, but what can really be downloaded from the URL (g5de45ww.exe) is actually a two-year old driver from 2012, version 9.17.10.2483 for Intel HD 4000. Does anyone know from where the current, up-to-date display driver for Intel HD 4000 in the T430 can be downloaded?

    On lenovo blogs someone asked Russ Compton (lenovo employee) this question, see his reply below:-
    "Q: Is this a software/driver update that can be applied to existing switchable graphics T410s models, or is there a hardware change which means it’s a feature of new “Optimus systems” only.
    A: Amardeep, that is a good question. All ThinkPads shipping today will be Optimus enabled if running Win 7.. The current T410, T410s and T510 that are in the field will not be able to upgrade. The changes are the following: 1- Graphics Driver, 2- BIOS UPDATE 3- EEPROM Flash. So the hardware is not changing, but the upgrade to Optimus is not supported due to the EEPROM update that is required."
    http://lenovoblogs.com/lenovofiles/2010/10/05/a-smarter-thinkpad-new-hybrid-graphicsbattery-saving-c...
    Hope it helps.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • Black screen - Xorg/GDM config - Nvidia Optimus? [solved]

    Hi!
    I have a Samsung RC539 S09, which has got an Nvidia Optimus graphics card, I want a graphical Xserver on that machine. Therefore I followed the wiki and installed the Nvidia stuff (https://wiki.archlinux.org/index.php/NVIDIA). I did not configure anything jet. I also installed the Xorg stuff and kept the config default (https://wiki.archlinux.org/index.php/Xorg). Then I did nvidia-xconfig:
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 280.13 ([email protected]
    ia.com) Wed Jul 27 17:15:58 PDT 2011
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    I have dbus runnung and do rc.d/gdm start.
    [root@myhost ~]# gdm-binary[1147]: WARNING: GdmDisplay: display lasted 1.143111 seconds
    gdm-binary[1147]: WARNING: GdmDisplay: display lasted 0.029825 seconds
    gdm-binary[1147]: WARNING: GdmDisplay: display lasted 0.029360 seconds
    gdm-binary[1147]: WARNING: GdmDisplay: display lasted 0.029428 seconds
    gdm-binary[1147]: WARNING: GdmDisplay: display lasted 0.029470 seconds
    gdm-binary[1147]: WARNING: GdmDisplay: display lasted 0.029108 seconds
    gdm-binary[1147]: WARNING: GdmLocalDisplayFactory: maximum number of X display failures reached: check X server log for errors
    My logfile says, that after successfully loading the modules, the failure occures at:
    [ 591.812] (EE) No devices detected.
    [ 591.812]
    Fatal server error:
    [ 591.812] no screens found
    [ 591.812]
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    What does that mean? - No devices detected - can refer to these Nvidia Optimus stuff, where there's some ondemand switching for graphics acceleration afaik. I'm not sure how to solve my issue. So at this point could need some help
    Best,
    wishi
    edit: got this working with the intel stuff. Did onyone archive GPU support jet?
    Last edited by windsheep (2011-08-20 20:34:25)

    first at all check
    lspci | grep -i vga
    I have optimus and I see both cards, Intel and nVidia.
    What do you see?
    If you install xf86-video-intel instead of nvidia driver, does it work then? (backup & remove /etc/X11/xorg.conf then)
    I had to disable optimus and switch to my dedicated nVidia graphics card  in bios in order to make nvidia driver work.
    Now I'm using intel with bumblebee (optimus support for linux) & optimus enabled in bios, and bumblebee loads proprietary nvidia drivers when required.
    But I also have a thinkpad t510, I don't know if bumblebee works with your device.
    cheers, kulpae
    Last edited by kulpae (2011-08-20 14:45:41)

  • T510 dual external monitors without docking station

    Hi, didn't find this one in google or at this forum...
    can I connect 2 external monitors with resolution 1600X900 to t510 without any docking station? (one to the VGA and the other to the HDMI port). do I need the Nvidia m3100 or some other graphic card to support this? or the internal intel cpu graphic card can handle this? 
    same question above about 3 external monitors...

    I've got a T510 with the Optimus graphics (4313CTO), one monitor connected to VGA, the other connected to the DisplayPort.  According to this: http://www-307.ibm.com/pc/support/site.wss/MIGR-76​617.html, 
    I should be able to connect two external monitors, but it only allows on active external monitor at-a-time.  Is that support site inaccurate?  I would assume having to video cards would allow two external monitors, but this seems to be an issue for this laptop.
    Best Regards,
    Mike

  • W530 - nvidia optimus bug

    You have the bug with nvidia optimus activated os detection in bios ?
    I have a bug. I have lines horizontal that appears on screen and disappear across in office. Driver update all witch tools update system by lenovo.
    Driver nvidia 296.88
    Driver intel  8.15.10.2725
    Windows seven pro
    Configuration bios  BUG .....
    Boot display device : thinkpad LCD
    Graphics Device : Nvidia optimus
    Os Dection for nvidia optimus : enabled
    Configuration bios   No BUG
    Boot display device : thinkpad LCD
    Graphics Device : Nvidia optimus
    Os Dection for nvidia optimus : disabled
    Configuration bios NO BUG:
    Boot display device : thinkpad LCD
    Graphics Device : discrete Graphics
    Os Dection for nvidia optimus : disabled
    Configuration bios  NO BUG:
    Boot display device : thinkpad LCD
    Graphics Device : integrated Graphics
    Os Dection for nvidia optimus : disabled

    Hey Boube,
    I have come across an issue with using the Nvidia drivers to using the lenovo drivers if you could uninstall the Nvidia drivers and install the lenovo drivers and this could fix your issue.
    NVIDIA Optimus Display Driver for Windows 7 (64-bit) - ThinkPad
    NVIDIA Optimus Display Driver Version: 8.17.12.9688
    NVIDIA Optimus Display Driver for Windows 7 (32-bit) - ThinkPad
    NVIDIA Optimus Display Driver Version: 8.17.12.9688
    NVIDIA Display Driver for Windows XP - ThinkPad W530
    NVIDIA Display Driver Version: 6.14.12.9680/1.3.12.0
    Please post back if you have any other issues or questions.
    Best Regards,
    Hiro
    Did you find a post Awesome? A response just Outstanding? Kudo them!
    Did the post you read answer your question? Did someone help you figure out your problem? Hit Solution Provided and give that person a pat on the back for helping you out!

  • T510: Gaming power only at 40 Watts

    I formatted my laptop and updated the bios, now my computer can't handle games I used to play with ease.
    I have my power settings at max, before it would run at 90 watts. Now only at 40watts. 
    I have a T510 with NVS3100 video card. Could it be discrete video is not being used?
    Moderator Note: Edited subject to match content.

    T510 does have Optimus Nvidia technology in later model T510.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Drivers for T510 Under XP SP3 32-bit

    Hello,
    I am trying to install XP 32-BIT with SP3 on a T510 (4314-DEU) but It will not install the video drivers or one of the audio drivers. I have tried downloading them directly from the site and using TVSU 3.14 and neither have worked. Looking for suggestions.
    Device Manager Info:
    HDAUDIO\FUNC_01&VEN_8086&DEV_2804&SUBSYS_17AA21B5&REV_1000
    HDAUDIO\FUNC_01&VEN_8086&DEV_2804&SUBSYS_17AA21B5
    PCI\VEN_10DE&DEV_0A6C&SUBSYS_21D817AA&REV_A2
    PCI\VEN_10DE&DEV_0A6C&SUBSYS_21D817AA
    PCI\VEN_10DE&DEV_0A6C&CC_030000
    PCI\VEN_10DE&DEV_0A6C&CC_0300
    PCI\VEN_8086&DEV_0046&SUBSYS_21D917AA&REV_02
    PCI\VEN_8086&DEV_0046&SUBSYS_21D917AA
    PCI\VEN_8086&DEV_0046&CC_030000
    PCI\VEN_8086&DEV_0046&CC_0300
    Thanks
    Scott

    Hi and welcome to the forum!
    What happens when you manually try to install the audio driver? 
    Try installing the modem driver:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70328
    According to tabook your T510 has nVidia Optimus card for which XP driver is not available (either from lenovo or nVidia), my guess is that it's not compatible with XP.
    Hope this helps.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • Thinkpad T420 three monitors linux/nvidia optimus

    Hello,
    I have a thinkpad T420 with a nvidia nvs4200 optimus. It has two video ports, one vga and one displayport. With optimus and windows 7 it should be able to display an two external and the internal display, in sum on three monitors.
    In the bios I can switch between integrated, discrete, optimus. With discrete I am able to use two monitors. With optimus enabled, the Intel can't see the displayport.
    Now the interesting thing. I installed bumblebee and it works. For curiosity I set it up to use the monitor "DP1", et voila, after running the bumblebee deamon and something with optirun I can see the bumblebee X server on the third monitor connected to the displayport. I can run something on it with "DISPLAY=:8.0 gvim" or even "DISPLAY=:8.0 nvidia-settings". Btw. it uses the same mouse as the first X server.
    Now, any ideas how I could setup it for something useful?
    EDIT:
    Ok, with Xdmx it is possible to span a desktop using all three monitors, but with disabled glx, that means no composite, 3d etc.
    Setup to test it, assuming a running bumblebee installation:
    pacman -S xterm xorg-server-xdmx
    echo "exec /usr/bin/optirun /usr/bin/xterm" > ~/.xinitrc
    sudo /etc/rc.d/bumblebee start
    startx -- :7
    -in xterm run
    startx /usr/bin/xfce4-session -- /usr/bin/Xdmx -display :7 -display :8 +xinerama -noglxproxy
    Until someone has an idea how to enable glx, this setup is hardly useful.
    Gruß, Georg
    Last edited by Dschoordsch (2011-08-25 09:27:21)

    I managed to get 3 monitors working on my T420 with a Lenovo Mini Dock Series 3 Plus. Have a look at my xorg.conf below. Please note that with my T420, the DVI ports on the dock are (probably) hardwired to the nvidia card. The VGA might possibly be, as you said, hardwired to the intel card, whereas the DisplayPort might be hardwired to the nvidia card. So you'd need to power two screens (VGA + internal display) using the intel card and one screen (DP) using the nvidia.
    "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "LG0" 0 0
    Screen 1 "LG1" RightOf "LG0"
    Screen 2 "INT" LeftOf "LG0"
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    Option "Xinerama" "1"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/X11/misc"
    FontPath "/usr/share/fonts/X11/cyrillic"
    FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
    FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
    FontPath "/usr/share/fonts/X11/Type1"
    FontPath "/usr/share/fonts/X11/100dpi"
    FontPath "/usr/share/fonts/X11/75dpi"
    FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
    FontPath "built-ins"
    EndSection
    Section "Module"
    Load "record"
    Load "extmod"
    Load "dbe"
    Load "glx"
    Load "dri2"
    Load "dri"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "LG0"
    VendorName "LG"
    ModelName "LG Electronics L227W"
    HorizSync 30.0 - 83.0
    VertRefresh 56.0 - 75.0
    EndSection
    Section "Monitor"
    Identifier "LG1"
    VendorName "LG"
    ModelName "LG Electronics L227W"
    HorizSync 30.0 - 83.0
    VertRefresh 56.0 - 75.0
    EndSection
    Section "Monitor"
    Identifier "INT"
    VendorName "Unknown"
    ModelName "Internal"
    HorizSync 30.0 - 83.0
    VertRefresh 56.0 - 75.0
    EndSection
    Section "Device"
    Identifier "intel0"
    Driver "intel"
    Option "XvMC" "true"
    Option "UseEvents" "true"
    Option "AccelMethod" "UXA"
    BusID "PCI:0:2:0"
    EndSection
    Section "Device"
    Identifier "nvidia0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "NVS 4200M"
    BusID "PCI:1:0:0"
    Screen 0
    EndSection
    Section "Device"
    Identifier "nvidia1"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "NVS 4200M"
    BusID "PCI:1:0:0"
    Screen 1
    EndSection
    Section "Screen"
    Identifier "LG0"
    Device "nvidia0"
    Monitor "LG0"
    DefaultDepth 24
    Option "TwinView" "0"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "LG1"
    Device "nvidia1"
    Monitor "LG1"
    DefaultDepth 24
    Option "TwinView" "0"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "INT"
    Device "intel"
    Monitor "INT"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Last edited by fhirschmann (2011-09-20 21:46:31)

  • [GAVE UP] Failure to initialize graphics device [Thinkpad 530W,Nvidia]

    Hello,
    I fail to use `nvidia` as graphics driver for my xorg on a Thinkpad 530W laptop using Nvidia Quadro 2000M and intel graphics card. Using instead `intel` or `vesa` work. This following logs are with optimus enabled, but I tried the same things with only the nvidia graphics card enabled in the bios and I also fail to load the nvidia driver.
    I followed the advice at
    https://wiki.archlinux.org/index.php/NV … IA_Optimus
    for xorg not to be confused by the presense of two graphics cards.
    Do you have any ideas how I get the nvidia card to run? Should I try Bumblebee? But can this even help if already only the nvidia card by itself makes problem? Do you need any more information?
    Thanks, for any advice,
    Holger
    This is a fresh install on a new laptop and I am new to Arch (but with Linux for a long time).
    Here are the logs:
    XOrg.log
    [ 6.236]
    X.Org X Server 1.14.4
    Release Date: 2013-10-31
    [ 6.236] X Protocol Version 11, Revision 0
    [ 6.236] Build Operating System: Linux 3.11.6-1-ARCH x86_64
    [ 6.236] Current Operating System: Linux ho-think 3.12.2-1-ARCH #1 SMP PREEMPT Fri Nov 29 21:14:15 CET 2013 x86_64
    [ 6.236] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=267f069c-11da-4d2a-88fa-00cab4e28149 rw quiet resume=/dev/sda6
    [ 6.236] Build Date: 01 November 2013 05:10:48PM
    [ 6.236]
    [ 6.236] Current version of pixman: 0.32.4
    [ 6.236] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 6.236] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 6.237] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 5 23:50:52 2013
    [ 6.239] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 6.239] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 6.239] (==) No Layout section. Using the first Screen section.
    [ 6.239] (==) No screen section available. Using defaults.
    [ 6.239] (**) |-->Screen "Default Screen Section" (0)
    [ 6.239] (**) | |-->Monitor "<default monitor>"
    [ 6.240] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 6.240] (**) | |-->Device "Nvidia Card"
    [ 6.240] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 6.240] (==) Automatically adding devices
    [ 6.240] (==) Automatically enabling devices
    [ 6.240] (==) Automatically adding GPU devices
    [ 6.242] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 6.242] Entry deleted from font path.
    [ 6.244] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 6.244] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 6.244] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 6.244] (II) Loader magic: 0x7fdc20
    [ 6.244] (II) Module ABI versions:
    [ 6.244] X.Org ANSI C Emulation: 0.4
    [ 6.244] X.Org Video Driver: 14.1
    [ 6.244] X.Org XInput driver : 19.1
    [ 6.244] X.Org Server Extension : 7.0
    [ 6.244] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 6.245] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 6.246] (--) PCI:*(0:0:2:0) 8086:0166:17aa:21f5 rev 9, Mem @ 0xf1400000/4194304, 0xe0000000/268435456, I/O @ 0x00006000/64
    [ 6.246] (--) PCI: (0:1:0:0) 10de:0ffb:17aa:21f5 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288
    [ 6.246] Initializing built-in extension Generic Event Extension
    [ 6.246] Initializing built-in extension SHAPE
    [ 6.246] Initializing built-in extension MIT-SHM
    [ 6.246] Initializing built-in extension XInputExtension
    [ 6.246] Initializing built-in extension XTEST
    [ 6.246] Initializing built-in extension BIG-REQUESTS
    [ 6.246] Initializing built-in extension SYNC
    [ 6.246] Initializing built-in extension XKEYBOARD
    [ 6.246] Initializing built-in extension XC-MISC
    [ 6.246] Initializing built-in extension SECURITY
    [ 6.247] Initializing built-in extension XINERAMA
    [ 6.247] Initializing built-in extension XFIXES
    [ 6.247] Initializing built-in extension RENDER
    [ 6.247] Initializing built-in extension RANDR
    [ 6.247] Initializing built-in extension COMPOSITE
    [ 6.247] Initializing built-in extension DAMAGE
    [ 6.247] Initializing built-in extension MIT-SCREEN-SAVER
    [ 6.247] Initializing built-in extension DOUBLE-BUFFER
    [ 6.247] Initializing built-in extension RECORD
    [ 6.247] Initializing built-in extension DPMS
    [ 6.247] Initializing built-in extension X-Resource
    [ 6.247] Initializing built-in extension XVideo
    [ 6.247] Initializing built-in extension XVideo-MotionCompensation
    [ 6.247] Initializing built-in extension XFree86-VidModeExtension
    [ 6.247] Initializing built-in extension XFree86-DGA
    [ 6.247] Initializing built-in extension XFree86-DRI
    [ 6.247] Initializing built-in extension DRI2
    [ 6.247] (II) "glx" will be loaded by default.
    [ 6.247] (II) LoadModule: "dri2"
    [ 6.247] (II) Module "dri2" already built-in
    [ 6.247] (II) LoadModule: "glamoregl"
    [ 6.275] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
    [ 6.475] (II) Module glamoregl: vendor="X.Org Foundation"
    [ 6.475] compiled for 1.14.2, module version = 0.5.1
    [ 6.475] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 6.475] (II) LoadModule: "glx"
    [ 6.475] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 6.517] (II) Module glx: vendor="NVIDIA Corporation"
    [ 6.517] compiled for 4.0.2, module version = 1.0.0
    [ 6.517] Module class: X.Org Server Extension
    [ 6.517] (II) NVIDIA GLX Module 331.20 Wed Oct 30 17:36:48 PDT 2013
    [ 6.517] Loading extension GLX
    [ 6.517] (II) LoadModule: "nvidia"
    [ 6.517] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 6.549] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 6.549] compiled for 4.0.2, module version = 1.0.0
    [ 6.549] Module class: X.Org Video Driver
    [ 6.549] (II) NVIDIA dlloader X Driver 331.20 Wed Oct 30 17:16:53 PDT 2013
    [ 6.549] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 6.549] (++) using VT number 7
    [ 6.553] (II) Loading sub module "fb"
    [ 6.554] (II) LoadModule: "fb"
    [ 6.554] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 6.557] (II) Module fb: vendor="X.Org Foundation"
    [ 6.557] compiled for 1.14.4, module version = 1.0.0
    [ 6.557] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 6.557] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 6.557] (II) Loading sub module "wfb"
    [ 6.557] (II) LoadModule: "wfb"
    [ 6.557] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 6.559] (II) Module wfb: vendor="X.Org Foundation"
    [ 6.559] compiled for 1.14.4, module version = 1.0.0
    [ 6.559] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 6.559] (II) Loading sub module "ramdac"
    [ 6.559] (II) LoadModule: "ramdac"
    [ 6.559] (II) Module "ramdac" already built-in
    [ 6.559] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 6.559] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 6.559] (==) NVIDIA(0): RGB weight 888
    [ 6.559] (==) NVIDIA(0): Default visual is TrueColor
    [ 6.559] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 6.559] (**) NVIDIA(0): Enabling 2D acceleration
    [ 11.161] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
    [ 11.161] (EE) NVIDIA(GPU-0): check your system's kernel log for additional error
    [ 11.161] (EE) NVIDIA(GPU-0): messages and refer to Chapter 8: Common Problems in the
    [ 11.161] (EE) NVIDIA(GPU-0): README for additional information.
    [ 11.161] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA graphics device!
    [ 11.161] (EE) NVIDIA(0): Failing initialization of X screen 0
    [ 11.161] (II) UnloadModule: "nvidia"
    [ 11.161] (II) UnloadSubModule: "wfb"
    [ 11.161] (II) UnloadSubModule: "fb"
    [ 11.161] (EE) Screen(s) found, but none have a usable configuration.
    [ 11.161] (EE)
    Fatal server error:
    [ 11.161] (EE) no screens found(EE)
    [ 11.161] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 11.161] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 11.162] (EE)
    [ 11.167] (EE) Server terminated with error (1). Closing log file.
    dmesg with the nvidia failure at the end:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.12.2-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Fri Nov 29 21:14:15 CET 2013
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=267f069c-11da-4d2a-88fa-00cab4e28149 rw quiet resume=/dev/sda6
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000a6b2ffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000a6b30000-0x00000000bae9efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000bae9f000-0x00000000baf9efff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000bf9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043e5fffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000043e600000-0x000000043e7fffff] reserved
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: LENOVO 2447DW0/2447DW0, BIOS G5ET93WW (2.53 ) 05/24/2013
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x43e600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
    [ 0.000000] 1 base 000000000 mask F80000000 write-back
    [ 0.000000] 2 base 080000000 mask FC0000000 write-back
    [ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable
    [ 0.000000] 5 base 100000000 mask F00000000 write-back
    [ 0.000000] 6 base 200000000 mask E00000000 write-back
    [ 0.000000] 7 base 400000000 mask FC0000000 write-back
    [ 0.000000] 8 base 43F000000 mask FFF000000 uncachable
    [ 0.000000] 9 base 43E800000 mask FFF800000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0xa6b30 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x43e400000-0x43e5fffff]
    [ 0.000000] [mem 0x43e400000-0x43e5fffff] page 2M
    [ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x43c000000-0x43e3fffff]
    [ 0.000000] [mem 0x43c000000-0x43e3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x400000000-0x43bffffff]
    [ 0.000000] [mem 0x400000000-0x43bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
    [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x40003fff] page 4k
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x40005000-0xa6b2ffff]
    [ 0.000000] [mem 0x40005000-0x401fffff] page 4k
    [ 0.000000] [mem 0x40200000-0xa69fffff] page 2M
    [ 0.000000] [mem 0xa6a00000-0xa6b2ffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
    [ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M
    [ 0.000000] RAMDISK: [mem 0x379be000-0x37cd6fff]
    [ 0.000000] ACPI: RSDP 00000000000f0120 00024 (v02 LENOVO)
    [ 0.000000] ACPI: XSDT 00000000baffe170 000BC (v01 LENOVO TP-G5 00002530 PTL 00000002)
    [ 0.000000] ACPI: FACP 00000000bafe6000 0010C (v05 LENOVO TP-G5 00002530 PTL 00000002)
    [ 0.000000] ACPI: DSDT 00000000bafe8000 10A68 (v01 LENOVO TP-G5 00002530 INTL 20061109)
    [ 0.000000] ACPI: FACS 00000000baf54000 00040
    [ 0.000000] ACPI: SLIC 00000000baffd000 00176 (v01 LENOVO TP-G5 00002530 PTL 00000001)
    [ 0.000000] ACPI: TCPA 00000000baffc000 00032 (v02 PTL LENOVO 06040000 LNVO 00000001)
    [ 0.000000] ACPI: SSDT 00000000baffb000 00408 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
    [ 0.000000] ACPI: SSDT 00000000baffa000 00033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
    [ 0.000000] ACPI: SSDT 00000000baff9000 00797 (v01 LENOVO SataAhci 00001000 INTL 20061109)
    [ 0.000000] ACPI: HPET 00000000bafe4000 00038 (v01 LENOVO TP-G5 00002530 PTL 00000002)
    [ 0.000000] ACPI: APIC 00000000bafe3000 00098 (v01 LENOVO TP-G5 00002530 PTL 00000002)
    [ 0.000000] ACPI: MCFG 00000000bafe2000 0003C (v01 LENOVO TP-G5 00002530 PTL 00000002)
    [ 0.000000] ACPI: ECDT 00000000bafe1000 00052 (v01 LENOVO TP-G5 00002530 PTL 00000002)
    [ 0.000000] ACPI: FPDT 00000000bafe0000 00064 (v01 LENOVO TP-G5 00002530 PTL 00000002)
    [ 0.000000] ACPI: ASF! 00000000bafe7000 000A5 (v32 LENOVO TP-G5 00002530 PTL 00000002)
    [ 0.000000] ACPI: UEFI 00000000bafdf000 0003E (v01 LENOVO TP-G5 00002530 PTL 00000002)
    [ 0.000000] ACPI: UEFI 00000000bafde000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
    [ 0.000000] ACPI: MSDM 00000000bafdd000 00055 (v03 LENOVO TP-G5 00002530 PTL 00000002)
    [ 0.000000] ACPI: SSDT 00000000bafdc000 00D23 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
    [ 0.000000] ACPI: SSDT 00000000bafdb000 00A83 (v01 PmRef CpuPm 00003000 INTL 20061109)
    [ 0.000000] ACPI: UEFI 00000000bafda000 002A6 (v01 LENOVO TP-G5 00002530 PTL 00000002)
    [ 0.000000] ACPI: DBG2 00000000bafd9000 000E9 (v00 LENOVO TP-G5 00002530 PTL 00000002)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043e5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x43e5fffff]
    [ 0.000000] NODE_DATA [mem 0x43e5ed000-0x43e5f1fff]
    [ 0.000000] [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042e200000-ffff88043dbfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x43e5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x40003fff]
    [ 0.000000] node 0: [mem 0x40005000-0xa6b2ffff]
    [ 0.000000] node 0: [mem 0x100000000-0x43e5fffff]
    [ 0.000000] On node 0 totalpages: 4083403
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 10597 pages used for memmap
    [ 0.000000] DMA32 zone: 678191 pages, LIFO batch:31
    [ 0.000000] Normal zone: 53144 pages used for memmap
    [ 0.000000] Normal zone: 3401216 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xa6b30000-0xbae9efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbae9f000-0xbaf9efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbaf9f000-0xbaffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbafff000-0xbf9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
    [ 0.000000] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88043e200000 s86464 r8192 d24128 u262144
    [ 0.000000] pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4019577
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=267f069c-11da-4d2a-88fa-00cab4e28149 rw quiet resume=/dev/sda6
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 15995556K/16333612K available (5121K kernel code, 807K rwdata, 1708K rodata, 1144K init, 1288K bss, 338056K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 65536000 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 2694.031 MHz processor
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5390.56 BogoMIPS (lpj=8980103)
    [ 0.000005] pid_max: default: 32768 minimum: 301
    [ 0.000027] Security Framework initialized
    [ 0.000034] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000035] Yama: becoming mindful.
    [ 0.000923] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
    [ 0.004551] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.006146] Mount-cache hash table entries: 256
    [ 0.006298] Initializing cgroup subsys memory
    [ 0.006306] Initializing cgroup subsys devices
    [ 0.006307] Initializing cgroup subsys freezer
    [ 0.006309] Initializing cgroup subsys net_cls
    [ 0.006310] Initializing cgroup subsys blkio
    [ 0.006329] CPU: Physical Processor ID: 0
    [ 0.006330] CPU: Processor Core ID: 0
    [ 0.006334] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.006663] mce: CPU supports 9 MCE banks
    [ 0.006675] CPU0: Thermal monitoring enabled (TM1)
    [ 0.006685] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift: 1
    [ 0.006786] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
    [ 0.007682] ACPI: Core revision 20130725
    [ 0.013359] ACPI: All ACPI Tables successfully acquired
    [ 0.014627] ftrace: allocating 20311 entries in 80 pages
    [ 0.023669] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.056667] smpboot: CPU0: Intel(R) Core(TM) i7-3740QM CPU @ 2.70GHz (fam: 06, model: 3a, stepping: 09)
    [ 0.056673] TSC deadline timer enabled
    [ 0.056680] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
    [ 0.056686] ... version: 3
    [ 0.056687] ... bit width: 48
    [ 0.056688] ... generic registers: 4
    [ 0.056689] ... value mask: 0000ffffffffffff
    [ 0.056689] ... max period: 0000ffffffffffff
    [ 0.056690] ... fixed-purpose events: 3
    [ 0.056691] ... event mask: 000000070000000f
    [ 0.093731] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.080104] smpboot: Booting Node 0, Processors # 1 # 2 # 3 # 4 # 5 # 6 # 7 OK
    [ 0.215283] Brought up 8 CPUs
    [ 0.215286] smpboot: Total of 8 processors activated (43121.51 BogoMIPS)
    [ 0.221817] devtmpfs: initialized
    [ 0.225267] PM: Registering ACPI NVS region [mem 0xbae9f000-0xbaf9efff] (1048576 bytes)
    [ 0.225908] RTC time: 22:50:45, date: 12/05/13
    [ 0.225941] NET: Registered protocol family 16
    [ 0.226022] cpuidle: using governor ladder
    [ 0.226024] cpuidle: using governor menu
    [ 0.226046] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.226048] ACPI: bus type PCI registered
    [ 0.226050] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.226221] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.226224] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.230705] PCI: Using configuration type 1 for base access
    [ 0.231329] bio: create slab <bio-0> at 0
    [ 0.231442] ACPI: Added _OSI(Module Device)
    [ 0.231443] ACPI: Added _OSI(Processor Device)
    [ 0.231444] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.231445] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.232701] ACPI: EC: EC description table is found, configuring boot EC
    [ 0.236337] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.272341] ACPI: SSDT 00000000bae3a018 00A01 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
    [ 0.272660] ACPI: Dynamic OEM Table Load:
    [ 0.272661] ACPI: SSDT (null) 00A01 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
    [ 0.288532] ACPI: SSDT 00000000bae3ba98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
    [ 0.288874] ACPI: Dynamic OEM Table Load:
    [ 0.288876] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
    [ 0.301731] ACPI: SSDT 00000000bae39d98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
    [ 0.302048] ACPI: Dynamic OEM Table Load:
    [ 0.302049] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
    [ 0.316012] ACPI: Interpreter enabled
    [ 0.316018] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
    [ 0.316022] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
    [ 0.316034] ACPI: (supports S0 S3 S4 S5)
    [ 0.316035] ACPI: Using IOAPIC for interrupt routing
    [ 0.316057] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.316633] ACPI: ACPI Dock Station Driver: 2 docks/bays found
    [ 0.328772] ACPI: Power Resource [PUBS] (on)
    [ 0.332509] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.332575] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11)
    [ 0.332638] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.332701] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
    [ 0.332763] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 9 10 11)
    [ 0.332812] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
    [ 0.332874] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.332936] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11)
    [ 0.332972] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
    [ 0.333055] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
    [ 0.333132] acpi PNP0A08:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
    [ 0.333133] acpi PNP0A08:00: ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.333260] PCI host bridge to bus 0000:00
    [ 0.333262] pci_bus 0000:00: root bus resource [bus 00-3f]
    [ 0.333264] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.333265] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.333267] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.333268] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfebfffff]
    [ 0.333270] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff]
    [ 0.333277] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
    [ 0.333338] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
    [ 0.333365] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.333416] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
    [ 0.333426] pci 0000:00:02.0: reg 0x10: [mem 0xf1400000-0xf17fffff 64bit]
    [ 0.333432] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.333436] pci 0000:00:02.0: reg 0x20: [io 0x6000-0x603f]
    [ 0.333514] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [ 0.333534] pci 0000:00:14.0: reg 0x10: [mem 0xf3a20000-0xf3a2ffff 64bit]
    [ 0.333603] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.333630] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.333664] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 0.333686] pci 0000:00:16.0: reg 0x10: [mem 0xf3a35000-0xf3a3500f 64bit]
    [ 0.333761] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.333815] pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002
    [ 0.333833] pci 0000:00:16.3: reg 0x10: [io 0x60b0-0x60b7]
    [ 0.333842] pci 0000:00:16.3: reg 0x14: [mem 0xf3a3c000-0xf3a3cfff]
    [ 0.333964] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
    [ 0.333981] pci 0000:00:19.0: reg 0x10: [mem 0xf3a00000-0xf3a1ffff]
    [ 0.333989] pci 0000:00:19.0: reg 0x14: [mem 0xf3a3b000-0xf3a3bfff]
    [ 0.333997] pci 0000:00:19.0: reg 0x18: [io 0x6080-0x609f]
    [ 0.334058] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    [ 0.334085] pci 0000:00:19.0: System wakeup disabled by ACPI
    [ 0.334117] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 0.334137] pci 0000:00:1a.0: reg 0x10: [mem 0xf3a3a000-0xf3a3a3ff]
    [ 0.334226] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.334254] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.334287] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 0.334302] pci 0000:00:1b.0: reg 0x10: [mem 0xf3a30000-0xf3a33fff 64bit]
    [ 0.334368] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.334400] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.334427] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
    [ 0.334502] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.334557] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
    [ 0.334632] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.334687] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
    [ 0.334762] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.334792] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 0.334829] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 0.334849] pci 0000:00:1d.0: reg 0x10: [mem 0xf3a39000-0xf3a393ff]
    [ 0.334936] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.334965] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.334997] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
    [ 0.335148] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
    [ 0.335165] pci 0000:00:1f.2: reg 0x10: [io 0x60a8-0x60af]
    [ 0.335173] pci 0000:00:1f.2: reg 0x14: [io 0x60bc-0x60bf]
    [ 0.335181] pci 0000:00:1f.2: reg 0x18: [io 0x60a0-0x60a7]
    [ 0.335188] pci 0000:00:1f.2: reg 0x1c: [io 0x60b8-0x60bb]
    [ 0.335195] pci 0000:00:1f.2: reg 0x20: [io 0x6060-0x607f]
    [ 0.335203] pci 0000:00:1f.2: reg 0x24: [mem 0xf3a38000-0xf3a387ff]
    [ 0.335246] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.335294] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 0.335309] pci 0000:00:1f.3: reg 0x10: [mem 0xf3a34000-0xf3a340ff 64bit]
    [ 0.335329] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
    [ 0.335425] pci 0000:01:00.0: [10de:0ffb] type 00 class 0x030000
    [ 0.335432] pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf0ffffff]
    [ 0.335439] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.335445] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
    [ 0.335450] pci 0000:01:00.0: reg 0x24: [io 0x5000-0x507f]
    [ 0.335454] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
    [ 0.341690] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.341695] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
    [ 0.341700] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff]
    [ 0.341706] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 0.341865] pci 0000:02:00.0: [1180:e823] type 00 class 0x088001
    [ 0.341884] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
    [ 0.341910] pci 0000:02:00.0: reg 0x10: [mem 0xf3101000-0xf31010ff]
    [ 0.342112] pci 0000:02:00.0: supports D1 D2
    [ 0.342113] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.342242] pci 0000:02:00.3: [1180:e832] type 00 class 0x0c0010
    [ 0.342268] pci 0000:02:00.3: reg 0x10: [mem 0xf3100000-0xf31007ff]
    [ 0.342472] pci 0000:02:00.3: supports D1 D2
    [ 0.342474] pci 0000:02:00.3: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.348460] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.348465] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
    [ 0.348469] pci 0000:00:1c.0: bridge window [mem 0xf3100000-0xf39fffff]
    [ 0.348475] pci 0000:00:1c.0: bridge window [mem 0xf1800000-0xf1ffffff 64bit pref]
    [ 0.348567] pci 0000:03:00.0: [8086:4238] type 00 class 0x028000
    [ 0.348614] pci 0000:03:00.0: reg 0x10: [mem 0xf3000000-0xf3001fff 64bit]
    [ 0.348839] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
    [ 0.355042] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 0.355054] pci 0000:00:1c.1: bridge window [mem 0xf3000000-0xf30fffff]
    [ 0.355151] acpiphp: Slot [1] registered
    [ 0.355157] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
    [ 0.355162] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
    [ 0.355165] pci 0000:00:1c.2: bridge window [mem 0xf2800000-0xf2ffffff]
    [ 0.355171] pci 0000:00:1c.2: bridge window [mem 0xf2000000-0xf27fffff 64bit pref]
    [ 0.356013] ACPI: Enabled 4 GPEs in block 00 to 3F
    [ 0.356023] ACPI: \_SB_.PCI0: notify handler is installed
    [ 0.356059] Found 1 acpi root devices
    [ 0.356106] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
    [ 0.356165] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.356169] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
    [ 0.356170] vgaarb: loaded
    [ 0.356171] vgaarb: bridge control possible 0000:01:00.0
    [ 0.356172] vgaarb: no bridge control possible 0000:00:02.0
    [ 0.356199] PCI: Using ACPI for IRQ routing
    [ 0.357682] PCI: pci_cache_line_size set to 64 bytes
    [ 0.357820] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    [ 0.357822] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
    [ 0.357823] e820: reserve RAM buffer [mem 0xa6b30000-0xa7ffffff]
    [ 0.357824] e820: reserve RAM buffer [mem 0x43e600000-0x43fffffff]
    [ 0.357892] NetLabel: Initializing
    [ 0.357893] NetLabel: domain hash size = 128
    [ 0.357894] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.357904] NetLabel: unlabeled traffic allowed by default
    [ 0.357921] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.357925] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.360952] Switched to clocksource hpet
    [ 0.364213] pnp: PnP ACPI init
    [ 0.364226] ACPI: bus type PNP registered
    [ 0.364530] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.364532] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
    [ 0.364534] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
    [ 0.364535] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
    [ 0.364537] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
    [ 0.364538] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
    [ 0.364540] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
    [ 0.364541] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
    [ 0.364545] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
    [ 0.364546] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
    [ 0.364548] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
    [ 0.364549] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
    [ 0.364551] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
    [ 0.364552] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
    [ 0.364554] system 00:00: [mem 0x00100000-0xbf9fffff] could not be reserved
    [ 0.364555] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
    [ 0.364557] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
    [ 0.364560] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.364624] pnp 00:01: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
    [ 0.364643] system 00:01: [io 0x0400-0x047f] could not be reserved
    [ 0.364644] system 00:01: [io 0x0500-0x057f] has been reserved
    [ 0.364646] system 00:01: [io 0x0800-0x080f] has been reserved
    [ 0.364647] system 00:01: [io 0x15e0-0x15ef] has been reserved
    [ 0.364649] system 00:01: [io 0x1600-0x167f] has been reserved
    [ 0.364651] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.364652] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.364654] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
    [ 0.364655] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.364657] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.364658] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
    [ 0.364661] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.364703] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.364710] pnp 00:03: [dma 4]
    [ 0.364723] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.364738] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.364763] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.364782] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.364803] pnp 00:07: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
    [ 0.364824] pnp 00:08: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
    [ 0.364860] pnp 00:09: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
    [ 0.365288] pnp: PnP ACPI: found 10 devices
    [ 0.365290] ACPI: bus type PNP unregistered
    [ 0.371588] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
    [ 0.371620] pci 0000:01:00.0: BAR 6: assigned [mem 0xf1000000-0xf107ffff pref]
    [ 0.371622] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.371624] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
    [ 0.371627] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff]
    [ 0.371629] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 0.371632] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.371635] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
    [ 0.371640] pci 0000:00:1c.0: bridge window [mem 0xf3100000-0xf39fffff]
    [ 0.371644] pci 0000:00:1c.0: bridge window [mem 0xf1800000-0xf1ffffff 64bit pref]
    [ 0.371650] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 0.371655] pci 0000:00:1c.1: bridge window [mem 0xf3000000-0xf30fffff]
    [ 0.371663] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
    [ 0.371666] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
    [ 0.371671] pci 0000:00:1c.2: bridge window [mem 0xf2800000-0xf2ffffff]
    [ 0.371675] pci 0000:00:1c.2: bridge window [mem 0xf2000000-0xf27fffff 64bit pref]
    [ 0.371681] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.371683] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.371684] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.371686] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfebfffff]
    [ 0.371687] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff]
    [ 0.371688] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
    [ 0.371690] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf10fffff]
    [ 0.371691] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 0.371693] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
    [ 0.371694] pci_bus 0000:02: resource 1 [mem 0xf3100000-0xf39fffff]
    [ 0.371695] pci_bus 0000:02: resource 2 [mem 0xf1800000-0xf1ffffff 64bit pref]
    [ 0.371697] pci_bus 0000:03: resource 1 [mem 0xf3000000-0xf30fffff]
    [ 0.371698] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
    [ 0.371700] pci_bus 0000:04: resource 1 [mem 0xf2800000-0xf2ffffff]
    [ 0.371701] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf27fffff 64bit pref]
    [ 0.371726] NET: Registered protocol family 2
    [ 0.371936] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
    [ 0.372200] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.372304] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.372320] TCP: reno registered
    [ 0.372335] UDP hash table entries: 8192 (order: 6, 262144 bytes)
    [ 0.372381] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
    [ 0.372455] NET: Registered protocol family 1
    [ 0.372464] pci 0000:00:02.0: Boot video device
    [ 0.372838] PCI: CLS 64 bytes, default 64
    [ 0.372874] Unpacking initramfs...
    [ 0.419708] Freeing initrd memory: 3172K (ffff8800379be000 - ffff880037cd7000)
    [ 0.419712] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.419714] software IO TLB [mem 0xa2b30000-0xa6b30000] (64MB) mapped at [ffff8800a2b30000-ffff8800a6b2ffff]
    [ 0.419965] Scanning for low memory corruption every 60 seconds
    [ 0.420184] audit: initializing netlink socket (disabled)
    [ 0.420191] type=2000 audit(1386283845.413:1): initialized
    [ 0.430696] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.431915] zbud: loaded
    [ 0.432021] VFS: Disk quotas dquot_6.5.2
    [ 0.432054] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.432181] msgmni has been set to 31247
    [ 0.432413] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.432453] io scheduler noop registered
    [ 0.432454] io scheduler deadline registered
    [ 0.432473] io scheduler cfq registered (default)
    [ 0.432595] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.432864] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.432875] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.432907] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
    [ 0.432908] vesafb: scrolling: redraw
    [ 0.432909] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.433568] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005c80000, using 8128k, total 8128k
    [ 0.566342] Console: switching to colour frame buffer device 240x67
    [ 0.698577] fb0: VESA VGA frame buffer device
    [ 0.698590] intel_idle: MWAIT substates: 0x21120
    [ 0.698591] intel_idle: v0.4 model 0x3A
    [ 0.698592] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.698765] GHES: HEST is not enabled!
    [ 0.698809] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.719500] 0000:00:16.3: ttyS0 at I/O 0x60b0 (irq = 19, base_baud = 115200) is a 16550A
    [ 0.719641] Linux agpgart interface v0.103
    [ 0.719702] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    [ 0.721201] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.721210] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.721298] mousedev: PS/2 mouse device common for all mice
    [ 0.721324] rtc_cmos 00:06: RTC can wake from S4
    [ 0.721444] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    [ 0.721474] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 0.721482] Intel P-state driver initializing.
    [ 0.721492] Intel pstate controlling: cpu 0
    [ 0.721502] Intel pstate controlling: cpu 1
    [ 0.721510] Intel pstate controlling: cpu 2
    [ 0.721520] Intel pstate controlling: cpu 3
    [ 0.721532] Intel pstate controlling: cpu 4
    [ 0.721541] Intel pstate controlling: cpu 5
    [ 0.721549] Intel pstate controlling: cpu 6
    [ 0.721558] Intel pstate controlling: cpu 7
    [ 0.721630] drop_monitor: Initializing network drop monitor service
    [ 0.721685] TCP: cubic registered
    [ 0.721757] NET: Registered protocol family 10
    [ 0.721886] NET: Registered protocol family 17
    [ 0.721894] Key type dns_resolver registered
    [ 0.722224] registered taskstats version 1
    [ 0.722596] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.723178] Magic number: 9:534:855
    [ 0.723283] rtc_cmos 00:06: setting system clock to 2013-12-05 22:50:46 UTC (1386283846)
    [ 0.723323] PM: Checking hibernation image partition /dev/sda6
    [ 0.726752] PM: Hibernation image not present or could not be loaded.
    [ 0.727429] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
    [ 0.727431] Write protecting the kernel read-only data: 8192k
    [ 0.729430] Freeing unused kernel memory: 1012K (ffff880001503000 - ffff880001600000)
    [ 0.730122] Freeing unused kernel memory: 340K (ffff8800017ab000 - ffff880001800000)
    [ 0.737327] systemd-udevd[79]: starting version 208
    [ 0.753625] ACPI: bus type USB registered
    [ 0.753654] usbcore: registered new interface driver usbfs
    [ 0.753672] usbcore: registered new interface driver hub
    [ 0.753762] usbcore: registered new device driver usb
    [ 0.754364] sdhci: Secure Digital Host Controller Interface driver
    [ 0.754367] sdhci: Copyright(c) Pierre Ossman
    [ 0.754471] pcieport 0000:00:1c.0: driver skip pci_set_master, fix it!
    [ 0.754490] SCSI subsystem initialized
    [ 0.754718] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.755262] ehci-pci: EHCI PCI platform driver
    [ 0.755386] ehci-pci 0000:00:1a.0: setting latency timer to 64
    [ 0.755406] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 0.755414] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 0.755427] ehci-pci 0000:00:1a.0: debug port 2
    [ 0.756165] libata version 3.00 loaded.
    [ 0.759355] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 0.759370] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf3a3a000
    [ 0.767505] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 0.767646] hub 1-0:1.0: USB hub found
    [ 0.767652] hub 1-0:1.0: 3 ports detected
    [ 0.767804] ehci-pci 0000:00:1d.0: setting latency timer to 64
    [ 0.767809] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 0.767812] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 0.767823] ehci-pci 0000:00:1d.0: debug port 2
    [ 0.771708] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.771720] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf3a39000
    [ 0.780896] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.780996] hub 2-0:1.0: USB hub found
    [ 0.781000] hub 2-0:1.0: 3 ports detected
    [ 0.781193] xhci_hcd 0000:00:14.0: setting latency timer to 64
    [ 0.781197] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.781202] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 0.781297] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 0.781317] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
    [ 0.781456] hub 3-0:1.0: USB hub found
    [ 0.781467] hub 3-0:1.0: 4 ports detected
    [ 0.781705] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.781708] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
    [ 0.781799] hub 4-0:1.0: USB hub found
    [ 0.781807] hub 4-0:1.0: 4 ports detected
    [ 0.791001] ahci 0000:00:1f.2: version 3.0
    [ 0.791067] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
    [ 0.791088] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
    [ 0.804224] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode
    [ 0.804231] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part ems sxs apst
    [ 0.804239] ahci 0000:00:1f.2: setting latency timer to 64
    [ 0.820938] firewire_ohci 0000:02:00.3: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
    [ 0.820989] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e823] (rev 5)
    [ 0.821107] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
    [ 0.824627] scsi0 : ahci
    [ 0.824773] scsi1 : ahci
    [ 0.824907] scsi2 : ahci
    [ 0.825041] scsi3 : ahci
    [ 0.825234] scsi4 : ahci
    [ 0.825350] scsi5 : ahci
    [ 0.825384] ata1: SATA max UDMA/133 abar m2048@0xf3a38000 port 0xf3a38100 irq 42
    [ 0.825387] ata2: SATA max UDMA/133 abar m2048@0xf3a38000 port 0xf3a38180 irq 42
    [ 0.825390] ata3: SATA max UDMA/133 abar m2048@0xf3a38000 port 0xf3a38200 irq 42
    [ 0.825391] ata4: DUMMY
    [ 0.825406] ata5: SATA max UDMA/133 abar m2048@0xf3a38000 port 0xf3a38300 irq 42
    [ 0.825406] ata6: DUMMY
    [ 1.074138] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 1.144102] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 1.145449] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.145455] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 1.146823] ata1.00: ATA-8: HGST HTS725050A7E630, GH2ZB550, max UDMA/133
    [ 1.146827] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.148298] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.148304] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 1.149813] ata1.00: configured for UDMA/133
    [ 1.150087] scsi 0:0:0:0: Direct-Access ATA HGST HTS725050A7 GH2Z PQ: 0 ANSI: 5
    [ 1.198525] hub 1-1:1.0: USB hub found
    [ 1.198715] hub 1-1:1.0: 6 ports detected
    [ 1.307453] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 1.320895] firewire_core 0000:02:00.3: created device fw0: GUID 3c970effbe0ba2ff, S400
    [ 1.420670] tsc: Refined TSC clocksource calibration: 2693.881 MHz
    [ 1.431513] hub 2-1:1.0: USB hub found
    [ 1.431588] hub 2-1:1.0: 8 ports detected
    [ 1.467351] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.471615] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
    [ 1.473091] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
    [ 1.476312] ata2.00: ATAPI: HL-DT-ST DVDRAM GT80N, LT20, max UDMA/133
    [ 1.480154] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
    [ 1.481633] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
    [ 1.484853] ata2.00: configured for UDMA/133
    [ 1.493873] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT80N LT20 PQ: 0 ANSI: 5
    [ 1.590645] usb 3-2: new low-speed USB device number 2 using xhci_hcd
    [ 1.611303] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 1.611311] usb 3-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 1.613287] hidraw: raw HID events driver (C) Jiri Kosina
    [ 1.623187] usbcore: registered new interface driver usbhid
    [ 1.623191] usbhid: USB HID core driver
    [ 1.623948] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input2
    [ 1.624086] hid-generic 0003:046D:C505.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-2/input0
    [ 1.624501] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/input/input3
    [ 1.624758] hid-generic 0003:046D:C505.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-2/input1
    [ 1.677468] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
    [ 1.813904] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.814517] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.814523] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 1.814902] ata3.00: ATA-8: SAMSUNG MZMPC032HBCD-000L1, CXM13L1Q, max UDMA/133
    [ 1.814908] ata3.00: 62533296 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.815417] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.815424] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 1.815843] ata3.00: configured for UDMA/133
    [ 1.815996] scsi 2:0:0:0: Direct-Access ATA SAMSUNG MZMPC032 CXM1 PQ: 0 ANSI: 5
    [ 1.827413] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
    [ 1.980746] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
    [ 2.133788] ata5: SATA link down (SStatus 0 SControl 300)
    [ 2.138079] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 2.138084] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [ 2.138107] sd 2:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
    [ 2.138214] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.138218] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.138263] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.138291] sd 2:0:0:0: [sdb] Write Protect is off
    [ 2.138294] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 2.138365] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.139366] sdb: sdb1
    [ 2.139583] sd 2:0:0:0: [sdb] Attached SCSI disk
    [ 2.140832] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.140834] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.140984] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 2.150609] usb 2-1.5: new low-speed USB device number 3 using ehci-pci
    [ 2.217042] raid6: sse2x1 6045 MB/s
    [ 2.222964] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
    [ 2.224086] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.242780] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input4
    [ 2.242927] hid-generic 0003:046D:C051.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.5/input0
    [ 2.273683] raid6: sse2x2 9288 MB/s
    [ 2.330330] raid6: sse2x4 13180 MB/s
    [ 2.330331] raid6: using algorithm sse2x4 (13180 MB/s)
    [ 2.330332] raid6: using ssse3x2 recovery algorithm
    [ 2.330416] xor: automatically using best checksumming function:
    [ 2.363659] avx : 27280.800 MB/sec
    [ 2.365888] bio: create slab <bio-1> at 1
    [ 2.366416] Btrfs loaded
    [ 2.366872] btrfs: device fsid 267f069c-11da-4d2a-88fa-00cab4e28149 devid 1 transid 2746 /dev/sdb1
    [ 2.420417] Switched to clocksource tsc
    [ 2.749348] btrfs: device fsid f6907d81-f46f-4911-8600-858e8b6bd1a0 devid 1 transid 3707 /dev/sda5
    [ 3.007064] PM: Starting manual resume from disk
    [ 3.007067] PM: Hibernation image partition 8:6 present
    [ 3.007068] PM: Looking for hibernation image.
    [ 3.007178] PM: Image not found (code -22)
    [ 3.007183] PM: Hibernation image not present or could not be loaded.
    [ 3.014955] btrfs: device fsid 267f069c-11da-4d2a-88fa-00cab4e28149 devid 1 transid 2746 /dev/sdb1
    [ 3.015285] btrfs: disk space caching is enabled
    [ 3.028402] Btrfs detected SSD devices, enabling SSD mode
    [ 3.211825] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 3.212136] systemd[1]: Set hostname to <ho-think>.
    [ 3.252550] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 3.252605] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 3.252618] systemd[1]: Starting Remote File Systems.
    [ 3.252629] systemd[1]: Reached target Remote File Systems.
    [ 3.252638] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 3.252667] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 3.252675] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 3.252701] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 3.252709] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 3.252724] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 3.252731] systemd[1]: Starting Delayed Shutdown Socket.
    [ 3.252748] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 3.252758] systemd[1]: Starting Journal Socket.
    [ 3.252795] systemd[1]: Listening on Journal Socket.
    [ 3.253090] systemd[1]: Starting Apply Kernel Variables...
    [ 3.253532] systemd[1]: Starting Journal Service...
    [ 3.253811] systemd[1]: Started Journal Service.
    [ 3.287546] systemd-journald[182]: Vacuuming done, freed 0 bytes
    [ 3.390618] btrfs: use ssd allocation scheme
    [ 3.390622] btrfs: disk space caching is enabled
    [ 3.400329] systemd-udevd[218]: starting version 208
    [ 3.490322] input: PC Speaker as /devices/platform/pcspkr/input/input5
    [ 3.491089] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 3.491746] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
    [ 3.491865] ACPI: Lid Switch [LID]
    [ 3.492466] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20130725/utaddress-251)
    [ 3.492471] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 3.492475] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130725/utaddress-251)
    [ 3.492490] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 3.492491] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130725/utaddress-251)
    [ 3.492494] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 3.492495] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 3.493000] pps_core: LinuxPPS API ver. 1 registered
    [ 3.493002] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
    [ 3.493659] ACPI: Requesting acpi_cpufreq
    [ 3.493823] PTP clock support registered
    [ 3.494020] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7
    [ 3.494025] ACPI: Sleep Button [SLPB]
    [ 3.494069] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
    [ 3.494071] ACPI: Power Button [PWRF]
    [ 3.494675] mei_me 0000:00:16.0: setting latency timer to 64
    [ 3.494714] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
    [ 3.494990] ACPI: AC Adapter [AC] (on-line)
    [ 3.495691] tpm_tis 00:09: 1.2 TPM (device-id 0x0, rev-id 78)
    [ 3.498616] Non-volatile memory driver v1.3
    [ 3.498683] [drm] Initialized drm 1.1.0 20060810
    [ 3.499437] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
    [ 3.502565] ACPI: Battery Slot [BAT0] (battery present)
    [ 3.502633] thinkpad_acpi: ThinkPad ACPI Extras v0.24
    [ 3.502635] thinkpad_acpi: http://ibm-acpi.sf.net/
    [ 3.502636] thinkpad_acpi: ThinkPad BIOS G5ET93WW (2.53 ), EC unknown
    [ 3.502637] thinkpad_acpi: Lenovo ThinkPad W530, model 2447DW0
    [ 3.504741] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
    [ 3.504742] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
    [ 3.504806] e1000e 0000:00:19.0: setting latency timer to 64
    [ 3.504855] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
    [ 3.504869] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
    [ 3.505719] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
    [ 3.505814] thinkpad_acpi: radio switch found; radios are enabled
    [ 3.507612] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
    [ 3.507614] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
    [ 3.508991] wmi: Mapper loaded
    [ 3.510574] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
    [ 3.512202] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
    [ 3.512859] thermal LNXTHERM:00: registered as thermal_zone0
    [ 3.512862] ACPI: Thermal Zone [THM0] (51 C)
    [ 3.512964] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
    [ 3.513826] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9
    [ 3.519211] cfg80211: Calling CRDA to update world regulatory domain
    [ 3.529719] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 3.529721] Copyright(c) 2003-2013 Intel Corporation
    [ 3.529746] pcieport 0000:00:1c.1: driver skip pci_set_master, fix it!
    [ 3.529786] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 3.529839] iwlwifi 0000:03:00.0: irq 45 for MSI/MSI-X
    [ 3.541982] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x17
    [ 3.557020] media: Linux media interface: v0.10
    [ 3.559314] Bluetooth: Core ver 2.16
    [ 3.559324] NET: Registered protocol family 31
    [ 3.559325] Bluetooth: HCI device and connection manager initialized
    [ 3.559331] Bluetooth: HCI socket layer initialized
    [ 3.559332] Bluetooth: L2CAP socket layer initialized
    [ 3.559338] Bluetooth: SCO socket layer initialized
    [ 3.559760] Linux video capture interface: v2.00
    [ 3.561090] btrfs: device fsid 267f069c-11da-4d2a-88fa-00cab4e28149 devid 1 transid 2747 /dev/sdb1
    [ 3.563306] tpm_tis 00:09: TPM is disabled/deactivated (0x6)
    [ 3.565201] usbcore: registered new interface driver btusb
    [ 3.565757] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2ea)
    [ 3.567801] iTCO_vendor_support: vendor-support=0
    [ 3.568229] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input11
    [ 3.568341] usbcore: registered new interface driver uvcvideo
    [ 3.568342] USB Video Class driver (1.1.1)
    [ 3.568802] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 3.568825] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
    [ 3.568884] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 3.575973] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x17
    [ 3.579387] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x17
    [ 3.580314] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x17
    [ 3.580610] nvidia: module license 'NVIDIA' taints kernel.
    [ 3.580612] Disabling lock debugging due to kernel taint
    [ 3.580964] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x17
    [ 3.581262] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x17
    [ 3.581662] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x17
    [ 3.581969] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x17
    [ 3.582235] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 3.585585] nvidia 0000:01:00.0: enabling device (0000 -> 0003)
    [ 3.585626] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
    [ 3.585753] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
    [ 3.585756] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.20 Wed Oct 30 17:43:35 PDT 2013
    [ 3.590299] iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
    [ 3.604935] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [ 3.604939] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
    [ 3.604940] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 3.604942] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
    [ 3.604991] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
    [ 3.611807] kvm: disabled by bios
    [ 3.622449] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 3.643289] systemd-udevd[222]: renamed network interface wlan0 to wlp3s0
    [ 3.699041] e1000e 0000:00:19.0 eth0: registered PHC clock
    [ 3.699043] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:be:0b:a2
    [ 3.699045] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
    [ 3.699088] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
    [ 3.699268]

    I decided to use nouveau instead of nvidia and now I got my external an internal display working.

  • [SOLVED]Terminal at Lower Resolution

    Hello,
    I am on Arch linux with Gnome (GDM) and I have a question-
    1. When there was no Gnome. I couldn't get my resolution to be my native one. That login screen text was huge(resolution was low). Initially it was all good(when I was using nouveau), till I installed nvidia-340xx. If it makes sense. How to know if I have Optimus enabled ? (I didn't follow optimus part of the wiki and I ASSUMED I don't have optimus)My laptop is Toshiba Satellite - A665-S6070
    I also did
    Tips and tricks
    Fixing terminal resolution
    Transitioning from nouveau may cause your startup terminal to display at a lower resolution. For GRUB, see GRUB/Tips and tricks#Setting the framebuffer resolution for details.
    GNU nano 2.2.6 File: /etc/X11/xorg.conf
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 340.76 (buildmeister@swio-display-x86-rhel47-01) Thu Jan 22 12:12:24 PST 2015
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Unknown"
    HorizSync 28.0 - 75.0
    VertRefresh 43.0 - 72.0
    Option "PreferredMode" "1366x768"
    ModeLine "1366x768" 72.33 1366 1414 1466 1526 768 770 775 790 +hsync +vsync Interlace
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1366x768"
    EndSubSection
    EndSection
    /var/log/Xorg.0.log  -
    [ 418.253]
    X.Org X Server 1.17.1
    Release Date: 2015-02-10
    [ 418.253] X Protocol Version 11, Revision 0
    [ 418.253] Build Operating System: Linux 3.18.6-1-ARCH x86_64
    [ 418.253] Current Operating System: Linux Arch 3.19.2-1-ARCH #1 SMP PREEMPT Wed Mar 18 16:21:02 CET 2015 x86_64
    [ 418.253] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=08402ce0-a410-4f2d-aa05-6afb4296c9e1 rw quiet
    [ 418.253] Build Date: 14 March 2015 06:45:50PM
    [ 418.253]
    [ 418.253] Current version of pixman: 0.32.6
    [ 418.253] Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
    [ 418.253] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 418.253] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 21 04:56:20 2015
    [ 418.290] (==) Using config file: "/etc/X11/xorg.conf"
    [ 418.290] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 418.333] (==) ServerLayout "Layout0"
    [ 418.333] (**) |-->Screen "Screen0" (0)
    [ 418.333] (**) | |-->Monitor "Monitor0"
    [ 418.333] (**) | |-->Device "Device0"
    [ 418.333] (**) |-->Input Device "Keyboard0"
    [ 418.333] (**) |-->Input Device "Mouse0"
    [ 418.333] (==) Automatically adding devices
    [ 418.333] (==) Automatically enabling devices
    [ 418.333] (==) Automatically adding GPU devices
    [ 418.371] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF/".
    [ 418.371] Entry deleted from font path.
    [ 418.371] (Run 'mkfontdir' on "/usr/share/fonts/TTF/").
    [ 418.371] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
    [ 418.371] Entry deleted from font path.
    [ 418.371] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
    [ 418.371] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 418.371] Entry deleted from font path.
    [ 418.371] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 418.371] Entry deleted from font path.
    [ 418.371] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 418.371] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 418.371] Entry deleted from font path.
    [ 418.371] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 418.371] (==) FontPath set to:
    /usr/share/fonts/misc/
    [ 418.371] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 418.371] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 418.371] (WW) Disabling Keyboard0
    [ 418.371] (WW) Disabling Mouse0
    [ 418.384] (II) Loader magic: 0x815d80
    [ 418.384] (II) Module ABI versions:
    [ 418.384] X.Org ANSI C Emulation: 0.4
    [ 418.384] X.Org Video Driver: 19.0
    [ 418.384] X.Org XInput driver : 21.0
    [ 418.384] X.Org Server Extension : 9.0
    [ 418.387] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
    [ 418.388] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 418.389] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
    [ 418.392] (--) PCI:*(0:1:0:0) 10de:0a75:1179:fd30 rev 162, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00009000/128, BIOS @ 0x????????/524288
    [ 418.392] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 418.392] (II) LoadModule: "glx"
    [ 418.403] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 419.025] (II) Module glx: vendor="NVIDIA Corporation"
    [ 419.025] compiled for 4.0.2, module version = 1.0.0
    [ 419.025] Module class: X.Org Server Extension
    [ 419.026] (II) NVIDIA GLX Module 340.76 Thu Jan 22 11:24:42 PST 2015
    [ 419.035] (II) LoadModule: "nvidia"
    [ 419.035] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 419.099] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 419.099] compiled for 4.0.2, module version = 1.0.0
    [ 419.099] Module class: X.Org Video Driver
    [ 419.105] (II) NVIDIA dlloader X Driver 340.76 Thu Jan 22 11:03:05 PST 2015
    [ 419.105] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 419.106] (--) using VT number 2
    [ 419.162] (II) Loading sub module "fb"
    [ 419.162] (II) LoadModule: "fb"
    [ 419.162] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 419.182] (II) Module fb: vendor="X.Org Foundation"
    [ 419.182] compiled for 1.17.1, module version = 1.0.0
    [ 419.182] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 419.182] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 419.182] (II) Loading sub module "wfb"
    [ 419.182] (II) LoadModule: "wfb"
    [ 419.182] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 419.184] (II) Module wfb: vendor="X.Org Foundation"
    [ 419.184] compiled for 1.17.1, module version = 1.0.0
    [ 419.184] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 419.184] (II) Loading sub module "ramdac"
    [ 419.184] (II) LoadModule: "ramdac"
    [ 419.184] (II) Module "ramdac" already built-in
    [ 419.195] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 419.195] (==) NVIDIA(0): RGB weight 888
    [ 419.195] (==) NVIDIA(0): Default visual is TrueColor
    [ 419.195] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 419.196] (**) NVIDIA(0): Enabling 2D acceleration
    [ 420.273] (II) NVIDIA(0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
    [ 420.274] (II) NVIDIA(0): Vision stereo.
    [ 420.274] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
    [ 420.292] (II) NVIDIA(0): NVIDIA GPU GeForce 310M (GT218) at PCI:1:0:0 (GPU-0)
    [ 420.292] (--) NVIDIA(0): Memory: 524288 kBytes
    [ 420.292] (--) NVIDIA(0): VideoBIOS: 70.18.5f.00.12
    [ 420.292] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 420.297] (--) NVIDIA(0): Valid display device(s) on GeForce 310M at PCI:1:0:0
    [ 420.297] (--) NVIDIA(0): CRT-0
    [ 420.297] (--) NVIDIA(0): Seiko/Epson (DFP-0) (boot, connected)
    [ 420.297] (--) NVIDIA(0): DFP-1
    [ 420.297] (--) NVIDIA(0): CRT-0 Name Aliases:
    [ 420.297] (--) NVIDIA(0): CRT
    [ 420.297] (--) NVIDIA(0): CRT-0
    [ 420.297] (--) NVIDIA(0): DPY-0
    [ 420.297] (--) NVIDIA(0): VGA-0
    [ 420.297] (--) NVIDIA(0): VGA-0
    [ 420.297] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
    [ 420.297] (--) NVIDIA(GPU-0):
    [ 420.297] (--) NVIDIA(GPU-0): --- EDID for CRT-0 ---
    [ 420.297] (--) NVIDIA(GPU-0):
    [ 420.297] (--) NVIDIA(GPU-0): No EDID Available.
    [ 420.297] (--) NVIDIA(GPU-0):
    [ 420.297] (--) NVIDIA(GPU-0): --- End of EDID for CRT-0 ---
    [ 420.297] (--) NVIDIA(GPU-0):
    [ 420.297] (--) NVIDIA(0): Seiko/Epson (DFP-0): Internal LVDS
    [ 420.297] (--) NVIDIA(0): Seiko/Epson (DFP-0) Name Aliases:
    [ 420.297] (--) NVIDIA(0): DFP
    [ 420.297] (--) NVIDIA(0): DFP-0
    [ 420.297] (--) NVIDIA(0): DPY-1
    [ 420.297] (--) NVIDIA(0): LVDS-0
    [ 420.297] (--) NVIDIA(0): DPY-EDID-f0d8f39c-e735-531b-2696-7b835139c44d
    [ 420.297] (--) NVIDIA(0): LVDS-0
    [ 420.297] (--) NVIDIA(GPU-0): Seiko/Epson (DFP-0): 330.0 MHz maximum pixel clock
    [ 420.297] (--) NVIDIA(GPU-0):
    [ 420.297] (--) NVIDIA(GPU-0): --- EDID for Seiko/Epson (DFP-0) ---
    [ 420.297] (--) NVIDIA(GPU-0): EDID Version : 1.3
    [ 420.297] (--) NVIDIA(GPU-0): Manufacturer : SEC
    [ 420.297] (--) NVIDIA(GPU-0): Monitor Name : Seiko/Epson
    [ 420.297] (--) NVIDIA(GPU-0): Product ID : 0x3641
    [ 420.297] (--) NVIDIA(GPU-0): 32-bit Serial Number : 0x00000000
    [ 420.297] (--) NVIDIA(GPU-0): Serial Number String :
    [ 420.297] (--) NVIDIA(GPU-0): Manufacture Date : 2009, week 0
    [ 420.297] (--) NVIDIA(GPU-0): DPMS Capabilities :
    [ 420.297] (--) NVIDIA(GPU-0): Input Type : Digital
    [ 420.297] (--) NVIDIA(GPU-0): Prefer first detailed timing : Yes
    [ 420.297] (--) NVIDIA(GPU-0): Supports GTF : No
    [ 420.297] (--) NVIDIA(GPU-0): Maximum Image Size : 350 mm x 200 mm
    [ 420.297] (--) NVIDIA(GPU-0): Valid HSync Range : 47.4 kHz - 47.4 kHz
    [ 420.297] (--) NVIDIA(GPU-0): Valid VRefresh Range : 60.0 Hz - 60.0 Hz
    [ 420.297] (--) NVIDIA(GPU-0): EDID maximum pixel clock : 72.3 MHz
    [ 420.297] (--) NVIDIA(GPU-0):
    [ 420.297] (--) NVIDIA(GPU-0): Detailed Timings:
    [ 420.297] (--) NVIDIA(GPU-0): 1366 x 768 @ 60 Hz
    [ 420.297] (--) NVIDIA(GPU-0): Pixel Clock : 72.33 MHz
    [ 420.297] (--) NVIDIA(GPU-0): HRes, HSyncStart : 1366, 1414
    [ 420.297] (--) NVIDIA(GPU-0): HSyncEnd, HTotal : 1446, 1526
    [ 420.297] (--) NVIDIA(GPU-0): VRes, VSyncStart : 768, 770
    [ 420.297] (--) NVIDIA(GPU-0): VSyncEnd, VTotal : 775, 790
    [ 420.297] (--) NVIDIA(GPU-0): H/V Polarity : -/-
    [ 420.297] (--) NVIDIA(GPU-0): Image Size : 353 mm x 198 mm
    [ 420.297] (--) NVIDIA(GPU-0):
    [ 420.297] (--) NVIDIA(GPU-0):
    [ 420.297] (--) NVIDIA(GPU-0): Raw EDID bytes:
    [ 420.297] (--) NVIDIA(GPU-0):
    [ 420.297] (--) NVIDIA(GPU-0): 00 ff ff ff ff ff ff 00 4c a3 41 36 00 00 00 00
    [ 420.297] (--) NVIDIA(GPU-0): 00 13 01 03 80 23 14 78 0a 87 f5 94 57 4f 8c 27
    [ 420.297] (--) NVIDIA(GPU-0): 27 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
    [ 420.297] (--) NVIDIA(GPU-0): 01 01 01 01 01 01 41 1c 56 a0 50 00 16 30 30 20
    [ 420.297] (--) NVIDIA(GPU-0): 25 00 61 c6 10 00 00 19 00 00 00 0f 00 00 00 00
    [ 420.297] (--) NVIDIA(GPU-0): 00 00 00 00 00 23 5c 02 67 00 00 00 00 fe 00 53
    [ 420.297] (--) NVIDIA(GPU-0): 41 4d 53 55 4e 47 0a 20 20 20 20 20 00 00 00 fe
    [ 420.297] (--) NVIDIA(GPU-0): 00 31 36 30 41 54 30 36 2d 55 30 31 0a 20 00 04
    [ 420.297] (--) NVIDIA(GPU-0):
    [ 420.297] (--) NVIDIA(GPU-0): --- End of EDID for Seiko/Epson (DFP-0) ---
    [ 420.297] (--) NVIDIA(GPU-0):
    [ 420.297] (--) NVIDIA(0): DFP-1: Internal TMDS
    [ 420.297] (--) NVIDIA(0): DFP-1 Name Aliases:
    [ 420.297] (--) NVIDIA(0): DFP
    [ 420.297] (--) NVIDIA(0): DFP-1
    [ 420.297] (--) NVIDIA(0): DPY-2
    [ 420.297] (--) NVIDIA(0): HDMI-0
    [ 420.298] (--) NVIDIA(0): HDMI-0
    [ 420.298] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
    [ 420.298] (--) NVIDIA(GPU-0):
    [ 420.298] (--) NVIDIA(GPU-0): --- EDID for DFP-1 ---
    [ 420.298] (--) NVIDIA(GPU-0):
    [ 420.298] (--) NVIDIA(GPU-0): No EDID Available.
    [ 420.298] (--) NVIDIA(GPU-0):
    [ 420.298] (--) NVIDIA(GPU-0): --- End of EDID for DFP-1 ---
    [ 420.298] (--) NVIDIA(GPU-0):
    [ 420.298] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 420.298] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has
    [ 420.298] (**) NVIDIA(0): been enabled on all display devices.)
    [ 420.298] (II) NVIDIA(0): Frequency information for Seiko/Epson (DFP-0):
    [ 420.298] (II) NVIDIA(0): HorizSync : 30.000-75.000 kHz
    [ 420.298] (II) NVIDIA(0): VertRefresh : 59.998 Hz
    [ 420.298] (II) NVIDIA(0): (HorizSync from EDID)
    [ 420.298] (II) NVIDIA(0): (VertRefresh from EDID)
    [ 420.298] (II) NVIDIA(GPU-0):
    [ 420.298] (II) NVIDIA(GPU-0): --- Building ModePool for Seiko/Epson (DFP-0) ---
    [ 420.298] (II) NVIDIA(GPU-0): Validating Mode "1366x768":
    [ 420.298] (II) NVIDIA(GPU-0): 1366 x 768 @ 60 Hz
    [ 420.298] (II) NVIDIA(GPU-0): Mode Source: EDID
    [ 420.298] (II) NVIDIA(GPU-0): Pixel Clock : 72.33 MHz
    [ 420.298] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1366, 1414
    [ 420.298] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1446, 1526
    [ 420.298] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 770
    [ 420.298] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 775, 790
    [ 420.298] (II) NVIDIA(GPU-0): H/V Polarity : -/-
    [ 420.299] (II) NVIDIA(GPU-0): Viewport 1366x768+0+0
    [ 420.299] (II) NVIDIA(GPU-0): Horizontal Taps 0
    [ 420.299] (II) NVIDIA(GPU-0): Vertical Taps 0
    [ 420.299] (II) NVIDIA(GPU-0): Base SuperSample x4
    [ 420.299] (II) NVIDIA(GPU-0): Base Depth 32
    [ 420.299] (II) NVIDIA(GPU-0): Distributed Rendering 1
    [ 420.299] (II) NVIDIA(GPU-0): Overlay Depth 32
    [ 420.299] (II) NVIDIA(GPU-0): Mode is valid.
    [ 420.299] (II) NVIDIA(GPU-0):
    [ 420.299] (II) NVIDIA(GPU-0): Validating Mode "640x350":
    [ 420.299] (II) NVIDIA(GPU-0): 640 x 350 @ 85 Hz
    [ 420.299] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.299] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
    [ 420.299] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 672
    [ 420.299] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 736, 832
    [ 420.299] (II) NVIDIA(GPU-0): VRes, VSyncStart : 350, 382
    [ 420.299] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 385, 445
    [ 420.299] (II) NVIDIA(GPU-0): H/V Polarity : +/-
    [ 420.299] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.299] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.299] (WW) NVIDIA(GPU-0): allowed).
    [ 420.299] (II) NVIDIA(GPU-0):
    [ 420.299] (II) NVIDIA(GPU-0): Validating Mode "640x400":
    [ 420.299] (II) NVIDIA(GPU-0): 640 x 400 @ 85 Hz
    [ 420.299] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.299] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
    [ 420.299] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 672
    [ 420.299] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 736, 832
    [ 420.299] (II) NVIDIA(GPU-0): VRes, VSyncStart : 400, 401
    [ 420.299] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 404, 445
    [ 420.299] (II) NVIDIA(GPU-0): H/V Polarity : -/+
    [ 420.299] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.299] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.299] (WW) NVIDIA(GPU-0): allowed).
    [ 420.299] (II) NVIDIA(GPU-0):
    [ 420.299] (II) NVIDIA(GPU-0): Validating Mode "720x400":
    [ 420.299] (II) NVIDIA(GPU-0): 720 x 400 @ 85 Hz
    [ 420.299] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.299] (II) NVIDIA(GPU-0): Pixel Clock : 35.50 MHz
    [ 420.299] (II) NVIDIA(GPU-0): HRes, HSyncStart : 720, 756
    [ 420.299] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 828, 936
    [ 420.299] (II) NVIDIA(GPU-0): VRes, VSyncStart : 400, 401
    [ 420.299] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 404, 446
    [ 420.299] (II) NVIDIA(GPU-0): H/V Polarity : -/+
    [ 420.299] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.299] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.299] (WW) NVIDIA(GPU-0): allowed).
    [ 420.299] (II) NVIDIA(GPU-0):
    [ 420.299] (II) NVIDIA(GPU-0): Validating Mode "640x480":
    [ 420.299] (II) NVIDIA(GPU-0): 640 x 480 @ 60 Hz
    [ 420.299] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.299] (II) NVIDIA(GPU-0): Pixel Clock : 25.17 MHz
    [ 420.299] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 656
    [ 420.299] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 752, 800
    [ 420.299] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 490
    [ 420.299] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 492, 525
    [ 420.299] (II) NVIDIA(GPU-0): H/V Polarity : -/-
    [ 420.299] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.299] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.299] (WW) NVIDIA(GPU-0): allowed).
    [ 420.299] (II) NVIDIA(GPU-0):
    [ 420.299] (II) NVIDIA(GPU-0): Validating Mode "640x480":
    [ 420.299] (II) NVIDIA(GPU-0): 640 x 480 @ 73 Hz
    [ 420.299] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.299] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
    [ 420.299] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 664
    [ 420.299] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 704, 832
    [ 420.299] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 489
    [ 420.299] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 492, 520
    [ 420.299] (II) NVIDIA(GPU-0): H/V Polarity : -/-
    [ 420.299] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.299] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.299] (WW) NVIDIA(GPU-0): allowed).
    [ 420.299] (II) NVIDIA(GPU-0):
    [ 420.299] (II) NVIDIA(GPU-0): Validating Mode "640x480":
    [ 420.300] (II) NVIDIA(GPU-0): 640 x 480 @ 75 Hz
    [ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
    [ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 656
    [ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 720, 840
    [ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 481
    [ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 484, 500
    [ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : -/-
    [ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.300] (WW) NVIDIA(GPU-0): allowed).
    [ 420.300] (II) NVIDIA(GPU-0):
    [ 420.300] (II) NVIDIA(GPU-0): Validating Mode "640x480":
    [ 420.300] (II) NVIDIA(GPU-0): 640 x 480 @ 85 Hz
    [ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 36.00 MHz
    [ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 696
    [ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 752, 832
    [ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 481
    [ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 484, 509
    [ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : -/-
    [ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.300] (WW) NVIDIA(GPU-0): allowed).
    [ 420.300] (II) NVIDIA(GPU-0):
    [ 420.300] (II) NVIDIA(GPU-0): Validating Mode "800x600":
    [ 420.300] (II) NVIDIA(GPU-0): 800 x 600 @ 56 Hz
    [ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 36.00 MHz
    [ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 824
    [ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1024
    [ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
    [ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 603, 625
    [ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.300] (WW) NVIDIA(GPU-0): allowed).
    [ 420.300] (II) NVIDIA(GPU-0):
    [ 420.300] (II) NVIDIA(GPU-0): Validating Mode "800x600":
    [ 420.300] (II) NVIDIA(GPU-0): 800 x 600 @ 60 Hz
    [ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 40.00 MHz
    [ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 840
    [ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 968, 1056
    [ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
    [ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 605, 628
    [ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.300] (WW) NVIDIA(GPU-0): allowed).
    [ 420.300] (II) NVIDIA(GPU-0):
    [ 420.300] (II) NVIDIA(GPU-0): Validating Mode "800x600":
    [ 420.300] (II) NVIDIA(GPU-0): 800 x 600 @ 72 Hz
    [ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 50.00 MHz
    [ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 856
    [ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 976, 1040
    [ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 637
    [ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 643, 666
    [ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.300] (WW) NVIDIA(GPU-0): allowed).
    [ 420.300] (II) NVIDIA(GPU-0):
    [ 420.300] (II) NVIDIA(GPU-0): Validating Mode "800x600":
    [ 420.300] (II) NVIDIA(GPU-0): 800 x 600 @ 75 Hz
    [ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 49.50 MHz
    [ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 816
    [ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1056
    [ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
    [ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 604, 625
    [ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.300] (WW) NVIDIA(GPU-0): allowed).
    [ 420.300] (II) NVIDIA(GPU-0):
    [ 420.300] (II) NVIDIA(GPU-0): Validating Mode "800x600":
    [ 420.300] (II) NVIDIA(GPU-0): 800 x 600 @ 85 Hz
    [ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 56.30 MHz
    [ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 832
    [ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1048
    [ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
    [ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 604, 631
    [ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.301] (WW) NVIDIA(GPU-0): allowed).
    [ 420.301] (II) NVIDIA(GPU-0):
    [ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
    [ 420.301] (II) NVIDIA(GPU-0): 1024 x 768 @ 87 Hz
    [ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 44.90 MHz
    [ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1032
    [ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1208, 1264
    [ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 768
    [ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 776, 817
    [ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.301] (II) NVIDIA(GPU-0): Extra : Interlace
    [ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.301] (WW) NVIDIA(GPU-0): allowed).
    [ 420.301] (II) NVIDIA(GPU-0):
    [ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
    [ 420.301] (II) NVIDIA(GPU-0): 1024 x 768 @ 60 Hz
    [ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 65.00 MHz
    [ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1048
    [ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1184, 1344
    [ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 771
    [ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 777, 806
    [ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : -/-
    [ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.301] (WW) NVIDIA(GPU-0): allowed).
    [ 420.301] (II) NVIDIA(GPU-0):
    [ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
    [ 420.301] (II) NVIDIA(GPU-0): 1024 x 768 @ 70 Hz
    [ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 75.00 MHz
    [ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1048
    [ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1184, 1328
    [ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 771
    [ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 777, 806
    [ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : -/-
    [ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.301] (WW) NVIDIA(GPU-0): allowed).
    [ 420.301] (II) NVIDIA(GPU-0):
    [ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
    [ 420.301] (II) NVIDIA(GPU-0): 1024 x 768 @ 75 Hz
    [ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 78.75 MHz
    [ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1040
    [ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1136, 1312
    [ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 769
    [ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 772, 800
    [ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.301] (WW) NVIDIA(GPU-0): allowed).
    [ 420.301] (II) NVIDIA(GPU-0):
    [ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
    [ 420.301] (II) NVIDIA(GPU-0): 1024 x 768 @ 85 Hz
    [ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 94.50 MHz
    [ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1072
    [ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1168, 1376
    [ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 769
    [ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 772, 808
    [ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.301] (WW) NVIDIA(GPU-0): allowed).
    [ 420.301] (II) NVIDIA(GPU-0):
    [ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1152x864":
    [ 420.301] (II) NVIDIA(GPU-0): 1152 x 864 @ 75 Hz
    [ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 108.00 MHz
    [ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1152, 1216
    [ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1344, 1600
    [ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 864, 865
    [ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 868, 900
    [ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.302] (WW) NVIDIA(GPU-0): allowed).
    [ 420.302] (II) NVIDIA(GPU-0):
    [ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1280x960":
    [ 420.302] (II) NVIDIA(GPU-0): 1280 x 960 @ 60 Hz
    [ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 108.00 MHz
    [ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1280, 1376
    [ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1488, 1800
    [ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 960, 961
    [ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 964, 1000
    [ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.302] (WW) NVIDIA(GPU-0): allowed).
    [ 420.302] (II) NVIDIA(GPU-0):
    [ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1280x960":
    [ 420.302] (II) NVIDIA(GPU-0): 1280 x 960 @ 85 Hz
    [ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 148.50 MHz
    [ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1280, 1344
    [ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1504, 1728
    [ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 960, 961
    [ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 964, 1011
    [ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.302] (WW) NVIDIA(GPU-0): allowed).
    [ 420.302] (II) NVIDIA(GPU-0):
    [ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1280x1024":
    [ 420.302] (II) NVIDIA(GPU-0): 1280 x 1024 @ 60 Hz
    [ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 108.00 MHz
    [ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1280, 1328
    [ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1440, 1688
    [ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1024, 1025
    [ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1028, 1066
    [ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.302] (WW) NVIDIA(GPU-0): allowed).
    [ 420.302] (II) NVIDIA(GPU-0):
    [ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1280x1024":
    [ 420.302] (II) NVIDIA(GPU-0): 1280 x 1024 @ 75 Hz
    [ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 135.00 MHz
    [ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1280, 1296
    [ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1440, 1688
    [ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1024, 1025
    [ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1028, 1066
    [ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.302] (WW) NVIDIA(GPU-0): allowed).
    [ 420.302] (II) NVIDIA(GPU-0):
    [ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1280x1024":
    [ 420.302] (II) NVIDIA(GPU-0): 1280 x 1024 @ 85 Hz
    [ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 157.50 MHz
    [ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1280, 1344
    [ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1504, 1728
    [ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1024, 1025
    [ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1028, 1072
    [ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.302] (WW) NVIDIA(GPU-0): allowed).
    [ 420.302] (II) NVIDIA(GPU-0):
    [ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1600x1200":
    [ 420.302] (II) NVIDIA(GPU-0): 1600 x 1200 @ 60 Hz
    [ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 162.00 MHz
    [ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1600, 1664
    [ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1856, 2160
    [ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1200, 1201
    [ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1204, 1250
    [ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.302] (WW) NVIDIA(GPU-0): allowed).
    [ 420.302] (II) NVIDIA(GPU-0):
    [ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1600x1200":
    [ 420.302] (II) NVIDIA(GPU-0): 1600 x 1200 @ 65 Hz
    [ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 175.50 MHz
    [ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1600, 1664
    [ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1856, 2160
    [ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1200, 1201
    [ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1204, 1250
    [ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.303] (WW) NVIDIA(GPU-0): allowed).
    [ 420.303] (II) NVIDIA(GPU-0):
    [ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1600x1200":
    [ 420.303] (II) NVIDIA(GPU-0): 1600 x 1200 @ 70 Hz
    [ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 189.00 MHz
    [ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1600, 1664
    [ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1856, 2160
    [ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1200, 1201
    [ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1204, 1250
    [ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.303] (WW) NVIDIA(GPU-0): allowed).
    [ 420.303] (II) NVIDIA(GPU-0):
    [ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1600x1200":
    [ 420.303] (II) NVIDIA(GPU-0): 1600 x 1200 @ 75 Hz
    [ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 202.50 MHz
    [ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1600, 1664
    [ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1856, 2160
    [ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1200, 1201
    [ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1204, 1250
    [ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.303] (WW) NVIDIA(GPU-0): allowed).
    [ 420.303] (II) NVIDIA(GPU-0):
    [ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1600x1200":
    [ 420.303] (II) NVIDIA(GPU-0): 1600 x 1200 @ 85 Hz
    [ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 229.50 MHz
    [ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1600, 1664
    [ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1856, 2160
    [ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1200, 1201
    [ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1204, 1250
    [ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.303] (WW) NVIDIA(GPU-0): allowed).
    [ 420.303] (II) NVIDIA(GPU-0):
    [ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1792x1344":
    [ 420.303] (II) NVIDIA(GPU-0): 1792 x 1344 @ 60 Hz
    [ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 204.80 MHz
    [ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1792, 1920
    [ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2120, 2448
    [ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1344, 1345
    [ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1348, 1394
    [ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : -/+
    [ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.303] (WW) NVIDIA(GPU-0): allowed).
    [ 420.303] (II) NVIDIA(GPU-0):
    [ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1792x1344":
    [ 420.303] (II) NVIDIA(GPU-0): 1792 x 1344 @ 75 Hz
    [ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 261.00 MHz
    [ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1792, 1888
    [ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2104, 2456
    [ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1344, 1345
    [ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1348, 1417
    [ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : -/+
    [ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.303] (WW) NVIDIA(GPU-0): allowed).
    [ 420.303] (II) NVIDIA(GPU-0):
    [ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1856x1392":
    [ 420.303] (II) NVIDIA(GPU-0): 1856 x 1392 @ 60 Hz
    [ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 218.30 MHz
    [ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1856, 1952
    [ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2176, 2528
    [ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1392, 1393
    [ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1396, 1439
    [ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : -/+
    [ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.304] (WW) NVIDIA(GPU-0): allowed).
    [ 420.304] (II) NVIDIA(GPU-0):
    [ 420.304] (II) NVIDIA(GPU-0): Validating Mode "1856x1392":
    [ 420.304] (II) NVIDIA(GPU-0): 1856 x 1392 @ 75 Hz
    [ 420.304] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 288.00 MHz
    [ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1856, 1984
    [ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2208, 2560
    [ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1392, 1393
    [ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1396, 1500
    [ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : -/+
    [ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.304] (WW) NVIDIA(GPU-0): allowed).
    [ 420.304] (II) NVIDIA(GPU-0):
    [ 420.304] (II) NVIDIA(GPU-0): Validating Mode "1920x1440":
    [ 420.304] (II) NVIDIA(GPU-0): 1920 x 1440 @ 60 Hz
    [ 420.304] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 234.00 MHz
    [ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1920, 2048
    [ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2256, 2600
    [ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1440, 1441
    [ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1444, 1500
    [ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : -/+
    [ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.304] (WW) NVIDIA(GPU-0): allowed).
    [ 420.304] (II) NVIDIA(GPU-0):
    [ 420.304] (II) NVIDIA(GPU-0): Validating Mode "1920x1440":
    [ 420.304] (II) NVIDIA(GPU-0): 1920 x 1440 @ 75 Hz
    [ 420.304] (II) NVIDIA(GPU-0): Mode Source: VESA
    [ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 297.00 MHz
    [ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1920, 2064
    [ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2288, 2640
    [ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1440, 1441
    [ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1444, 1500
    [ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : -/+
    [ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.304] (WW) NVIDIA(GPU-0): allowed).
    [ 420.304] (II) NVIDIA(GPU-0):
    [ 420.304] (II) NVIDIA(GPU-0): Validating Mode "640x350":
    [ 420.304] (II) NVIDIA(GPU-0): 640 x 350 @ 85 Hz
    [ 420.304] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
    [ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 672
    [ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 736, 832
    [ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 350, 382
    [ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 385, 445
    [ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : +/-
    [ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.304] (WW) NVIDIA(GPU-0): allowed).
    [ 420.304] (II) NVIDIA(GPU-0):
    [ 420.304] (II) NVIDIA(GPU-0): Validating Mode "320x175":
    [ 420.304] (II) NVIDIA(GPU-0): 320 x 175 @ 85 Hz
    [ 420.304] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 15.75 MHz
    [ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 336
    [ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 368, 416
    [ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 175, 191
    [ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 192, 222
    [ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : +/-
    [ 420.304] (II) NVIDIA(GPU-0): Extra : DoubleScan
    [ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.304] (WW) NVIDIA(GPU-0): allowed).
    [ 420.304] (II) NVIDIA(GPU-0):
    [ 420.304] (II) NVIDIA(GPU-0): Validating Mode "640x400":
    [ 420.304] (II) NVIDIA(GPU-0): 640 x 400 @ 85 Hz
    [ 420.304] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
    [ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 672
    [ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 736, 832
    [ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 400, 401
    [ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 404, 445
    [ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/+
    [ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.305] (WW) NVIDIA(GPU-0): allowed).
    [ 420.305] (II) NVIDIA(GPU-0):
    [ 420.305] (II) NVIDIA(GPU-0): Validating Mode "320x200":
    [ 420.305] (II) NVIDIA(GPU-0): 320 x 200 @ 85 Hz
    [ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 15.75 MHz
    [ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 336
    [ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 368, 416
    [ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 200, 200
    [ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 202, 222
    [ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/+
    [ 420.305] (II) NVIDIA(GPU-0): Extra : DoubleScan
    [ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.305] (WW) NVIDIA(GPU-0): allowed).
    [ 420.305] (II) NVIDIA(GPU-0):
    [ 420.305] (II) NVIDIA(GPU-0): Validating Mode "720x400":
    [ 420.305] (II) NVIDIA(GPU-0): 720 x 400 @ 85 Hz
    [ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 35.50 MHz
    [ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 720, 756
    [ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 828, 936
    [ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 400, 401
    [ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 404, 446
    [ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/+
    [ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.305] (WW) NVIDIA(GPU-0): allowed).
    [ 420.305] (II) NVIDIA(GPU-0):
    [ 420.305] (II) NVIDIA(GPU-0): Validating Mode "360x200":
    [ 420.305] (II) NVIDIA(GPU-0): 360 x 200 @ 85 Hz
    [ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 17.75 MHz
    [ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 360, 378
    [ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 414, 468
    [ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 200, 200
    [ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 202, 223
    [ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/+
    [ 420.305] (II) NVIDIA(GPU-0): Extra : DoubleScan
    [ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.305] (WW) NVIDIA(GPU-0): allowed).
    [ 420.305] (II) NVIDIA(GPU-0):
    [ 420.305] (II) NVIDIA(GPU-0): Validating Mode "640x480":
    [ 420.305] (II) NVIDIA(GPU-0): 640 x 480 @ 60 Hz
    [ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 25.17 MHz
    [ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 656
    [ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 752, 800
    [ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 490
    [ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 492, 525
    [ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/-
    [ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.305] (WW) NVIDIA(GPU-0): allowed).
    [ 420.305] (II) NVIDIA(GPU-0):
    [ 420.305] (II) NVIDIA(GPU-0): Validating Mode "320x240":
    [ 420.305] (II) NVIDIA(GPU-0): 320 x 240 @ 60 Hz
    [ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 12.59 MHz
    [ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 328
    [ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 376, 400
    [ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 240, 245
    [ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 246, 262
    [ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/-
    [ 420.305] (II) NVIDIA(GPU-0): Extra : DoubleScan
    [ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.305] (WW) NVIDIA(GPU-0): allowed).
    [ 420.305] (II) NVIDIA(GPU-0):
    [ 420.305] (II) NVIDIA(GPU-0): Validating Mode "640x480":
    [ 420.305] (II) NVIDIA(GPU-0): 640 x 480 @ 73 Hz
    [ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
    [ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 664
    [ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 704, 832
    [ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 489
    [ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 492, 520
    [ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/-
    [ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.306] (WW) NVIDIA(GPU-0): allowed).
    [ 420.306] (II) NVIDIA(GPU-0):
    [ 420.306] (II) NVIDIA(GPU-0): Validating Mode "320x240":
    [ 420.306] (II) NVIDIA(GPU-0): 320 x 240 @ 73 Hz
    [ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 15.75 MHz
    [ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 332
    [ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 352, 416
    [ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 240, 244
    [ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 246, 260
    [ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : -/-
    [ 420.306] (II) NVIDIA(GPU-0): Extra : DoubleScan
    [ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.306] (WW) NVIDIA(GPU-0): allowed).
    [ 420.306] (II) NVIDIA(GPU-0):
    [ 420.306] (II) NVIDIA(GPU-0): Validating Mode "640x480":
    [ 420.306] (II) NVIDIA(GPU-0): 640 x 480 @ 75 Hz
    [ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
    [ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 656
    [ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 720, 840
    [ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 481
    [ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 484, 500
    [ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : -/-
    [ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.306] (WW) NVIDIA(GPU-0): allowed).
    [ 420.306] (II) NVIDIA(GPU-0):
    [ 420.306] (II) NVIDIA(GPU-0): Validating Mode "320x240":
    [ 420.306] (II) NVIDIA(GPU-0): 320 x 240 @ 75 Hz
    [ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 15.75 MHz
    [ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 328
    [ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 360, 420
    [ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 240, 240
    [ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 242, 250
    [ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : -/-
    [ 420.306] (II) NVIDIA(GPU-0): Extra : DoubleScan
    [ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.306] (WW) NVIDIA(GPU-0): allowed).
    [ 420.306] (II) NVIDIA(GPU-0):
    [ 420.306] (II) NVIDIA(GPU-0): Validating Mode "640x480":
    [ 420.306] (II) NVIDIA(GPU-0): 640 x 480 @ 85 Hz
    [ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 36.00 MHz
    [ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 696
    [ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 752, 832
    [ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 481
    [ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 484, 509
    [ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : -/-
    [ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.306] (WW) NVIDIA(GPU-0): allowed).
    [ 420.306] (II) NVIDIA(GPU-0):
    [ 420.306] (II) NVIDIA(GPU-0): Validating Mode "320x240":
    [ 420.306] (II) NVIDIA(GPU-0): 320 x 240 @ 85 Hz
    [ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 18.00 MHz
    [ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 348
    [ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 376, 416
    [ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 240, 240
    [ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 242, 254
    [ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : -/-
    [ 420.306] (II) NVIDIA(GPU-0): Extra : DoubleScan
    [ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.306] (WW) NVIDIA(GPU-0): allowed).
    [ 420.306] (II) NVIDIA(GPU-0):
    [ 420.306] (II) NVIDIA(GPU-0): Validating Mode "800x600":
    [ 420.306] (II) NVIDIA(GPU-0): 800 x 600 @ 56 Hz
    [ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 36.00 MHz
    [ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 824
    [ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1024
    [ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
    [ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 603, 625
    [ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.307] (WW) NVIDIA(GPU-0): allowed).
    [ 420.307] (II) NVIDIA(GPU-0):
    [ 420.307] (II) NVIDIA(GPU-0): Validating Mode "400x300":
    [ 420.307] (II) NVIDIA(GPU-0): 400 x 300 @ 56 Hz
    [ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 18.00 MHz
    [ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 400, 412
    [ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 448, 512
    [ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 300, 300
    [ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 301, 312
    [ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.307] (II) NVIDIA(GPU-0): Extra : DoubleScan
    [ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.307] (WW) NVIDIA(GPU-0): allowed).
    [ 420.307] (II) NVIDIA(GPU-0):
    [ 420.307] (II) NVIDIA(GPU-0): Validating Mode "800x600":
    [ 420.307] (II) NVIDIA(GPU-0): 800 x 600 @ 60 Hz
    [ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 40.00 MHz
    [ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 840
    [ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 968, 1056
    [ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
    [ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 605, 628
    [ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.307] (WW) NVIDIA(GPU-0): allowed).
    [ 420.307] (II) NVIDIA(GPU-0):
    [ 420.307] (II) NVIDIA(GPU-0): Validating Mode "400x300":
    [ 420.307] (II) NVIDIA(GPU-0): 400 x 300 @ 60 Hz
    [ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 20.00 MHz
    [ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 400, 420
    [ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 484, 528
    [ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 300, 300
    [ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 302, 314
    [ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.307] (II) NVIDIA(GPU-0): Extra : DoubleScan
    [ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.307] (WW) NVIDIA(GPU-0): allowed).
    [ 420.307] (II) NVIDIA(GPU-0):
    [ 420.307] (II) NVIDIA(GPU-0): Validating Mode "800x600":
    [ 420.307] (II) NVIDIA(GPU-0): 800 x 600 @ 72 Hz
    [ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 50.00 MHz
    [ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 856
    [ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 976, 1040
    [ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 637
    [ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 643, 666
    [ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.307] (WW) NVIDIA(GPU-0): allowed).
    [ 420.307] (II) NVIDIA(GPU-0):
    [ 420.307] (II) NVIDIA(GPU-0): Validating Mode "400x300":
    [ 420.307] (II) NVIDIA(GPU-0): 400 x 300 @ 72 Hz
    [ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 25.00 MHz
    [ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 400, 428
    [ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 488, 520
    [ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 300, 318
    [ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 321, 333
    [ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.307] (II) NVIDIA(GPU-0): Extra : DoubleScan
    [ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.307] (WW) NVIDIA(GPU-0): allowed).
    [ 420.307] (II) NVIDIA(GPU-0):
    [ 420.307] (II) NVIDIA(GPU-0): Validating Mode "800x600":
    [ 420.307] (II) NVIDIA(GPU-0): 800 x 600 @ 75 Hz
    [ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 49.50 MHz
    [ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 816
    [ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1056
    [ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
    [ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 604, 625
    [ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.308] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.308] (WW) NVIDIA(GPU-0): allowed).
    [ 420.308] (II) NVIDIA(GPU-0):
    [ 420.308] (II) NVIDIA(GPU-0): Validating Mode "400x300":
    [ 420.308] (II) NVIDIA(GPU-0): 400 x 300 @ 75 Hz
    [ 420.308] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.308] (II) NVIDIA(GPU-0): Pixel Clock : 24.75 MHz
    [ 420.308] (II) NVIDIA(GPU-0): HRes, HSyncStart : 400, 408
    [ 420.308] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 448, 528
    [ 420.308] (II) NVIDIA(GPU-0): VRes, VSyncStart : 300, 300
    [ 420.308] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 302, 312
    [ 420.308] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.308] (II) NVIDIA(GPU-0): Extra : DoubleScan
    [ 420.308] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.308] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.308] (WW) NVIDIA(GPU-0): allowed).
    [ 420.308] (II) NVIDIA(GPU-0):
    [ 420.308] (II) NVIDIA(GPU-0): Validating Mode "800x600":
    [ 420.308] (II) NVIDIA(GPU-0): 800 x 600 @ 85 Hz
    [ 420.308] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.308] (II) NVIDIA(GPU-0): Pixel Clock : 56.30 MHz
    [ 420.308] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 832
    [ 420.308] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1048
    [ 420.308] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
    [ 420.308] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 604, 631
    [ 420.308] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.308] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.308] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.308] (WW) NVIDIA(GPU-0): allowed).
    [ 420.308] (II) NVIDIA(GPU-0):
    [ 420.308] (II) NVIDIA(GPU-0): Validating Mode "400x300":
    [ 420.308] (II) NVIDIA(GPU-0): 400 x 300 @ 85 Hz
    [ 420.308] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.308] (II) NVIDIA(GPU-0): Pixel Clock : 28.15 MHz
    [ 420.308] (II) NVIDIA(GPU-0): HRes, HSyncStart : 400, 416
    [ 420.308] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 448, 524
    [ 420.308] (II) NVIDIA(GPU-0): VRes, VSyncStart : 300, 300
    [ 420.308] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 302, 315
    [ 420.308] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.308] (II) NVIDIA(GPU-0): Extra : DoubleScan
    [ 420.308] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
    [ 420.308] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
    [ 420.308] (WW) NVIDIA(GPU-0): allowed).
    [ 420.308] (II) NVIDIA(GPU-0):
    [ 420.308] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
    [ 420.308] (II) NVIDIA(GPU-0): 1024 x 768 @ 87 Hz
    [ 420.308] (II) NVIDIA(GPU-0): Mode Source: X Server
    [ 420.308] (II) NVIDIA(GPU-0): Pixel Clock : 44.90 MHz
    [ 420.308] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1032
    [ 420.308] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1208, 1264
    [ 420.308] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 768
    [ 420.308] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 776, 817
    [ 420.308] (II) NVIDIA(GPU-0): H/V Polarity : +/+
    [ 420.308] (II) N

    karol wrote:
    newguy wrote:These commands give no such file or directory
    Did you install uvesafb?
    Install v86d from AUR
    This was my first time installing from AUR so I think I installed it, "pacman -Q v86d" gives me output "v86d 0.1.10-5".
    Prepare the system
    Remove any framebuffer-related kernel boot parameter from the bootloader configuration to disable the old vesafb framebuffer from loading.
    $ grep vga /proc/cmdline
    $ grep -ir vga /etc/modprobe.d/
    Should return no results. If you do have a vga= option somewhere, you will need to remove it.
    It didn't
    GRUB
    Note: This might not work.
    First edit /etc/default/grub commenting the GRUB_GFXPAYLOAD_LINUX=keep line.
    Then regenerate grub.cfg via the standard script:
    # grub-mkconfig -o /boot/grub/grub.cfg
    Did this
    Then I also configured the file /usr/lib/modprobe.d/uvesafb.conf: (It wasn't empty) , so yeah. I think I installed it.Is there any other way to check ?
    Last edited by newguy (2015-03-21 10:21:29)

  • After Effects CS5 (and 5.5) Crash

    Hi guys,
    I can't seem to figure out a remedy for the cause of this crash for the life of me, despite trying the solutions I've found through out the forums, knowledgebase, and elsewhere...
    System specs:
    Dell Precision M6600, 24GB RAM, Core i7-2820QM, nVidia Quadro 4000M (w/ Optimus enabled) - Windows 7 x64, fresh installation with latest updates
    Basically I do a fresh install of AE 10 -> Launch it and sniffer_gpu.exe crashes (faulting module: igd10umd64.dll) -> AE opens -> try to open a project, AE crashes (faulting module: ntdll.dll)
    Update to 10.0.2.4, still does the same thing. Upgrade to CS5.5 trial, does the same thing.
    Tried different versions of the Intel HD graphics driver (as indicated by the sniffer_gpu.exe crash), no avail, reverted to Dell's latest recommended. Also did the same for the nVidia driver.
    Tried removing AE_opengl.aex (or something), tried disabling the already disabled "use opengl" for previews, tried renaming sniffer_gpu.exe to prevent it from launching, tried deleting the appdata / prefs, no avail.
    Tried the suggestings in Adobe's KB about troubleshooting OpenGL issues...
    Tried disabling Optimus from the BIOS, no help and not ideal for obvious reasons. Also tried setting the default GPU from Auto to the nVidia one.
    Finally reverted back to AE CS4 and it runs beautifully without problems - but I want to use CS5 because I bought it as part of the Master Collection Suite
    I'm pretty sure it has to do with the GPU detection on an Optimus chipset SPECIFICALLY with AE CS5. Premiere and Photoshop (CS5, 64-bit) detect my GPU correctly and run with the the nVidia card. In AE CS5, after sniffer_gpu.exe crashes and I get into the program, the preview preferences show that no video card is installed.
    My understanding is that somehow, sniffer_gpu.exe isn't doing its job properly. It could also be that nVidia Optimus doesn't have the proper rules (nvidia problem) or that the Intel drivers aren't handing off to the nVidia drivers properly, but I am out of ideas and need some suggestions... (Or perhaps Adobe should change their GPU detection method for AE because it sucks - why would photoshop detect it but AE doesn't?)
    Anyways, sorry for the frustration...

    I've been thinking about this since I saw it yesterday, but I honestly have no idea. Sounds more like a time-out issue and a rather specific one only affecting 64bit, as obviously your 32bit CS4 works...
    Mylenium

  • Fresh Install Windows 7 x64 IE 9 Flash Player Crash

    Greetings All,
    I am working on a major imaging prject for my organization.  I'm getting ready to create a new image for some of our machines so I was getting the reference computers ready.  I have noticed that when flash player is enabled in IE 9 it crashes the browser.  I get the "Internet Explorer has stopped working" error.  I can click the close program button, IE will try to launch the same page again and i get the error again with a bar on the bottome of the IE window stating "A problem with this webpage caused Internet Explorer to close and reopen the tab".  After a few rounds of this I get the "Internet Explorer has stopped trying to restore this website."  This is occuring on two different machines that I have been preping.
    Here are the details of what I have done to these machines:  (Dell E6420 and Dell E6320)
    1.  Installed Windows 7 x64 from install media (blanked the drive so fresh install)
    2.  Installed SEP 11.0.6200.754
    3.  Installed all drivers fresh off of Dell's website.
    4.  Installed Office 2010.
    5.  Ran and updated EVERYTHING from MICROSOFT update, SP1 and IE 9 included.
    6.  Went to Adobe.com and installed the latest Acrobat, Flash, and Shockwave Player from the links on the main page.
    7.  Rebooted and now anytime I go to any page with Flash objects I get the above error.
    Here are version:
    Windows 7 x64 SP1
    IE 9.0.8112.16421
    Shockwave Flash Object (Enabled in Manage Add-ons) 10.2.159.1
    As said these are two brand new machines, two fresh loads, two batches of software fresh from the web, and two machines having unacceptable problems when Flash is installed.  What's up here?
    Many Thanks for your time!

    I’m going to take a moment and do two things, bump the thread, and provide a short synopsis on where we stand on this issue.
    After much trial and error and the help of Chris I can say with relative certainty that this is an issue with compatibility between nVidia’s Optimus systems and Flash player’s hardware acceleration feature.  I don’t know if the issue is just IE9 or IE8.  I haven’t taken the time to try this on an Optimus system with IE 8 yet.  If someone out there is running one of the Optimus enabled laptops with IE8 and the latest flash installed I would love to hear some feed back.
    Ultimately IE8 vs. IE9 is an inconsequential issue.  Soon Microsoft will start pushing IE 9 as an important update meaning that the problem will need to be fixed or we’ll be faced with more users having the problem. 
    I have posted about the issue in the nVidia forums, Dell forums, and Adobe forums.  Please find the links to the threads below.  I don’t believe the issue to be unique to just the two Dell models that I am dealing with.  I have run across numerous complaints along this line from several different OEMs.
    Here are some links of interest if you want to research and lend your voice to the cause:
    Dell Forum Threads:
    http://en.community.dell.com/support-forums/laptop/f/3518/t/19376814.aspx
    http://en.community.dell.com/support-forums/laptop/f/3519/t/19376823.aspx
    nVidia Forum Thread:
    http://forums.nvidia.com/index.php?showtopic=199537
    General Information on Optimus Systems:
    http://www.nvidia.com/object/optimus_technology.html
    nVidia thread where they admit a flash issue and promise a pending driver update (some months ago):
    http://forums.nvidia.com/index.php?showtopic=191020
    Good luck all!

  • NVIDIA and external monitor

    W520, Windows 7 (64 bit), NVIDIA Quadro 1000M 2GB DDR3, purchased November 2011.
    Problems (related?):
    -External monitor remains unrecognized when connected to W520.
    -NVIDIA not recognized or working.   Maybe reason external monitor not recognized?
    Tried to connect this computer to an HP2511x external monitor (via VGA direct to the computer or through docking station) but the monitor is not recognized.  Last made this connection about a year ago and it worked fine at that time: plugged the VGA cable into the W520 and the external monitor connected automatically, in duplicate mode.  The HP usually is connected to another computer and works fine, and the VGA cable was tested recently and is good. Tried the options at Fn/F7 and windows key/P:  the HP monitor remains black.
    Studied the external monitor issue in forums and learned about the NVIDIA comments.   In follow up, I learned that the NVIDIA device is not listed in my Device Manager, under Display Adapters or elsewhere.  Right-clicking the desktop does no bring up the NVIDIA Control Panel.
    When I do a search for the NVIDIA Control Panel, this message appears:
    “NVIDIA display settings are not available.   You are not currently using a display attached to an NVIDIA  GPU.”  This appears whether VGA connected to the external monitor or not.
    I attempted, several times, to download the NVIDIA driver from the NVIDIA site via auto detection.  The auto detect page instructed me to download Java, but Java is already loaded and current.  So I entered the NVIDIA info manually, which eventually lead to this message:
    “NVIDIA Installer failed”
    HD Audio Driver – Not Installed
    NVIDIA WMI – Not Installed
    nView – Not Installed
    Graphics Driver – Failed
    3D Vision Driver – Not Installed
    So, I went to the Lenovo website and downloaded:
    “NVIDIA Optimus Display Driver for Windows 7 (64-bit) - ThinkPad”
    After a restart, right clicking the desktop still does not show the NVIDIA Control Panel. 
    The Device Manager shows:
    -Intel(R) HD Graphic Family
    -Unknown device
    I clicked on the Unknown device and read:
    -Device type: Display adapters
    Manufacturer: Unknown
    Location: PCI bus 1, device 0, function 0
    Device status: Reinstall the driver for this device. (Code 18)
    Then I clicked the Reinstall Driver button, which lead to this message:
    “Windows encountered a problem installing the driver software for your device.  Windows found driver software for your device but encountered an error while attempting to install it.  NVIDIA Quadro 1000M”
    I went through the above processes several times to be certain that I did not miss something.
    There is a GeForce shortcut on the desktop and when clicked, leads to this message:
    “GeForce Experience encountered an error and must close.”
    Tried rebooting to BIOS:
    BIOS>Config>Display: the options are:
    -Boot Display Device (ThinkPad LCD) default
    -Graphic Device (NVIDIA Optimus)
    -OS Detection for NVIDIA Optimus (enabled)
    Changed display to Graphic Device, tapped F10 to save and exit, then save, before computer goes into normal mode.
    Try Fn/F7, duplicate, then extend, then projector and in all cases the HP monitor remains black, unrecognized.  Message on W520 screen:
    “Unable to connect to a computer.
    No projector was detected.”
    So, back to reboot> BIOS>Config>Display were I find that the setup reverted to the default.  Changed display to OS Detection for NVIDIA Optimus disabled.  Save, reboot, Fn/F7 and again no recognition of the HP monitor.  Reboot, BIOS etc, and the display option is back to the original default.
    What do I need to do to get NVIDIA and the external monitor working on this W520?
    Thank you.

    Hi RR
    1. Ensure your BIOS is set to NVIDIA Optimus for multiple monitor connectivity.
    2. Download and update your Intel and NVIDIA driver from it's official website. Clicking Intel and NVIDIA will link directly to the download page for latest driver.
    3. If the 2 above succeed, but Fn+F7 still can't display your external monitor. Try right click Desktop > NVIDIA Control Panel > Display > Set up multiple displays. (The only workable method for W520 - Windows 8.1)
    Peter
    ThinkPad W520 | ThinkCentre E73 SFF | IdeaPad K1 | IdeaPad Yoga 11s | Miix 2 10" | 3000 Y300
    Give kudos to reward people for their assistance | Mark thread solved if the solution works | Please do not send me an e-mail regarding technical questions | I am not an Lenovo employee
    =====================================
    Dolby ; IdeaPad Slate Tablet

  • Problems with w520 and DisplayPort monitor

    Is anyone else noticing Any of the following problems using a monitor connected to the w520 using DisplayPort and  Lenovo Windows 7? -
    When the monitor's power saving is activated by the operating system, and is then woken up, the resolution is badly mangled. It's as if the screen is very heavily zooomed in. The only way I know to fix it is to start the Nvidia control panel by right clicking on the desktop, and selecting resize from "adjust desktop size and position"
    Worse still, after fixing the "zoomed in" problem, the color bit depth appears to be drastically reduced, so that smooth gradations of color (for instance from light to dark) are replaced by blocky transitions that look terrible.
    I'm noticing this problem on an 24" HP LP2475w running at 1900x1200, 32 bit. This is a professional quality wide gamut monitor. I never had these problems when it was previously connected to a T400s.
    Nvidia driver version is 8.17.12.7593, downloaded from the Lenovo support site. Windows is running the latest Microsoft and Lenovo updates. The BIOS is the latest version, 1.34.
    Does anyone have any ideas?
    Solved!
    Go to Solution.

    Thank you for the replies everyone. I have installed the drivers as suggested, but unfortunately the problem persists.
    I neglected to mention that I'm already running the BIOS in discrete mode only, because I use Linux heavily and optimus doesn't currently work under Linux. I have never seen the problem when using Linux.
    I can add a few more details, which I neglected to mention last time. When the problem occurs, and the computer is being shut down, the posterization problem persists even with the generic Windows is shutting down screen. I don't know enough about Windows to know whether the Nvidia driver is being used to output that or not.
    I'm confident it's not the monitor or the cable. In fact, I'm certain it's not because I just switched the BIOS to Nvidia optimus to see if it would be any better than that mode. to test it, I attached two external monitors (one VGA and one DisplayPort), and had the laptop lid open. As soon as I booted the machine, the problem reemerged once the login screen appeared: the DisplayPort monitor was heavily zoomed in, and the colors were posterized. I reset the screen size using the Nvidia control panel ( which does not fix the posterization problem), rebooted again, and this time the DisplayPort monitor was fine, but the laptop screen was heavily zoomed in.  Another problem occurring simultaneously after this second boot with Optimus enabled is that the display resolution on the laptop is fixed at 800x600 instead of 1920x1080. Intriguingly however, the laptop screen's color reproduction is not posterized.
    I have no idea if the problem is with the driver or bios.

Maybe you are looking for

  • Saved Tiffs will not open in CS2 and generate a "Could not complete your request because of a program error".

    this was supplied by Ann Shelbourne. Saved Tiffs will not open in CS2 and generate a "Could not complete your request because of a program error". These files will often open in Photoshop 7.0.1 or in CS1 but not in CS2. The trouble may be caused by b

  • To Display Image in Alv Grid....

    Hello Gurus, I want to display an image/icon ( custom icon ) in the ALV grid. I know to display standard icons in ALV. But i dont know how to store custom icons in the system. I want to display an icon or image depending upon certain conditions. i ne

  • XML request in Flex WebService using ActionScript

    Hi, I'm having a problem with dumping the request XML. When I send XML request to a web service with soapUI, it gives me normal results, but when I try to do the same thing in Flash using Flex, the web sevice responds with a SOAP fault. This is basic

  • PRC: Interface Usage and Miscellaneous Costs to General Ledger

    Urgent request We have the AP team that run the request PRC: Interface Usage and Miscellaneous Costs to General Ledger and it has been running for 2 hours+ This report is run every month without any problems. Work Around: had end user cancel and resu

  • JSP autorization page

    I am trying to develop a JSP page so that is a user enter his password (wrong)more than 3 times then he will be redirected to a page that he reached the maximum limit , cannot enter further. I have a login page which contains the HTML login form and