T510 and windows 7 licence

Hello
I've got ThinkPad T510 with win7 x64 pro licence.
I've cleared HDD completely in order to install fresh Windows and now I need my serial number for the licence I've payed for along with my laptop.
Short investigation and call to support showed it's not gonna happen as Lenovo doesn't provide me with my license number.
The only option they provide it forcing me to buy recovery disc for about ~90$, but I think I've already payed for licence and I just need my licence number, no need any discs or anything else.
How can I get my licence number back?
Where can I request for resolving the issue?
Thanks in advance.

@dykzei,
Welcome To Lenovo Forums.
Remove the T510 battery behind and you should be able to see the Windows License sticker.
//JameZ
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD

Similar Messages

T510 and Windows 7 validation

Did anyone else have their T510 delivered without a Genuine Windows sticker on the bottom?
Mine didn't come with one. Windows 7 activation fails (always did). Today, Windows gives a message that my version is not genuine, and cannot be activated using the Product ID already loaded in Windows. I've had my T510 for about a month, and the new hard drive for most of that time.
Did this happen because I used ThinkVantage Rescue & Recovery to upgrade my hard drive?
Solved!
Go to Solution.

Sure enough I too have had my laptop for about a month and the error came up for me too today? I see the number under the battery but I am not sure where I need to enter it? This is going to be a pain if it needs to be done all of the time?
Thinkpad T510-4313 CTO | Core i7 620M 2.66 GHz | 4 GB RAM | NVIDIA 3100m 512 MB | 15.6 inch LED HD Plus | Windows 7 Ultimate 64 | 1- TB (2-500 GB 7200rpm) Hard Drive |

Can you use Photoshop CC licence on OS Mavericks 10.9.1 and Windows 7

Can you use Photoshop CC licence on OS Mavericks 10.9.1 and Windows 7

Yes. You get a total of two activations, and one can be on one type of system and the other on the other. That's new with Photoshop CC subscriptions; before you could only run the software on either one or the other type of system.
-Noel

T520 and Windows 8.1 - do they play well together?

Hi. I'm probably going to be buying a T520 (my first Lenovo) and while doing some research elsewhere on this site, I found something that I'm hoping someone might explain.
This link goes to a page titled Windows 8.1 Tested System List and I don't see the T520 listed anywhere.
Looking more closely at the ThinkPad T series models that are on the list, I see that none of the "20" model versions of the T400 and T500 are listed, nor are any of the "10" versions, but the "30" and "40" series are.
I have a feeling that this list isn't up to date or isn't what it appears to be, since it's kind of hard to believe that even though it's not super new, the T520 would have issues running Windows 8. But I thought I'd ask.
I will actually be purchasing a used T520 with Windows 7, which is what I prefer anyway. But at some point I will either want to or need to move to Win 8. So I'd like to verify that that won't be a problem.
I'm excited about joining the Lenovo gang!
Thanks!

Hi MadGirlDisease,
I have a T510 with Windows 8 and it runs well, everuthing is working no problem. I haven't updated to 8.1 yet but as lead_org said windows 8 with no touchscreen is not that great but I use it mainly in desktop mode.
Vince.
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

How to I run Snow Leopard, Mountain Lion and Windows 8 on my new iMac

I just bought a new iMac. My goal is to set up 3 different partions to run 3 different operating systems (Mountain Lion, Snow Leopard, and Windows 8). The reason for this post is because when I attempted to do this same thing on my old iMac ( except I was running Lion instead of Mountain Lion) I was able to create a partion that would run Snow Leopard (so I could run Final Cut Pro 6.0.6 on a more stable platform), however I totally "hosed" my old Bootcamp partition running Windows XP. The iMac won't even bootup in Bootcamp anymore. It is just a black screen and it says something about it not being a bootable drive and to insert a bootable disc.
So I need to know the best way to do this, and I want to avoid having the same problems with my new iMac that I had on my old one, especially since I have a freelance job starting next week and my client is sending me licences for software that I will need to run on Windows 8.
Thank you in advance

Use the Boot Camp Assistant to install Windows 8 and a product such as VirtualBox, VMware Fusion, or Parallels Desktop to run Snow Leopard Server in emulation. That iMac model isn't capable of being booted into Snow Leopard.
(82996)

I HP Computer was stolen. Can i trace it from Windows Licence Key

My Laptop was stolen. However I have installed Windows Licence key on it. Is there a way to track the computer by the licence key

Sorry, but NO... there is no way to trace your computer by a Windows key.
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Licensing Acrobat Pro Mac and Windows on same Mac

I have a large number Macs in our business running Creative Suite 6. A number of those operators also have a need to run LiveCycle Designer, which is a Windows only product. At present we buy addtional 4 GB RAM, VMWare Fusion and a Windows 7 licence in addition to purchasing a standalone copy of Acrobat for Windows. Is it really necessary for us to buy an additional licence for Windows Acrobat or would we be OK utilising the existing Mac Acrobat Pro licence?

If you're buying the perpetual license version of Creative Suite 6, you would have to buy separate licenses for Macintosh and Windows versions. If you're getting Creative Suite 6 through your subscription to the Adobe Creative Cloud, you can mix your two eligible copies, and download both Windows and Mac versions.

Hello, I've got an Adobe Creative suite 5.5 Design Standard. It was on an old computer and it's now on a new one and the licence is not accepted !! I have cancelled the licence on the old one. somebody to help me ?

Hello,
My licence doesn't want to work on my new computer, even if I have cancelled it on my old computer !!
Someone can help me ?

Yes, I've migrated everything from the old to the new computer.
We have Windows 7.
Envoy? de mon iPad
Le 25 sept. 2014 ? 19:12, "Jeff A Wright" <[email protected]<mailto:[email protected]>> a ?crit :
Hello, I've got an Adobe Creative suite 5.5 Design Standard. It was on an old computer and it's now on a new one and the licence is not accepted !! I have cancelled the licence on the old one. somebody to help me ?
created by Jeff A Wright<https://forums.adobe.com/people/JeffAWright> in Downloading, Installing, Setting Up - View the full discussion<https://forums.adobe.com/message/6763565#6763565>

Firefox and Windows live mail won't play well together

If I open windows live mail from the task bar in windows 7 (64) I have to click on Firefox 5-10 times until it opens. If I open Firefox first, no problems. If I open live mail first, (which automatically opens messenger) I have to close both to open Firefox. Firefox is my default browser. I installed updates. Everything's current .

Hi MadGirlDisease,
I have a T510 with Windows 8 and it runs well, everuthing is working no problem. I haven't updated to 8.1 yet but as lead_org said windows 8 with no touchscreen is not that great but I use it mainly in desktop mode.
Vince.
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

Bluetooth not working for Lenovo G560 for windows XP and WINDOWS 7

When i installed Bluetooth software in my lenevo G560 for XP and Windows 7... it was installed successfully and after restart.. i can see an icon "My Bluetooth Places" . and when i clicked on that.. iam getting error message "NO LOCAL BLUETOOTH DEVICE WAS DETECTED" plzz solve me with this...

Hello mate,
Press Fn+F5 to activate bluetooth.
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

Hyper-V on Windows 2008R2 Running Windows 8.1 and Windows Phone

I am a lone wolf developer running Hyper-V on a legally-licensed Server running Windows Enterprise 2008R2. I have extremely limited research funding.
Since I need to evaluate Windows 8.1 and Windows Phone development for the 1080p Phone Emulator, I created a Virtual Machine of Windows 8.1 Evaluation Copy RTM on my server. I am trying to create software for the Nokia Lumia 1520 Phone-Tablet.
Everything in the Windows 8.1 Virtual Machine runs perfectly from Hyper-V on Windows 2008R2, except for one problem related to my Phone development project. Networking is perfect, the display is perfect, there are no other issues except this "gotcha".
The problem appears with the Windows Phone SDK Update 4, which supports a 1080p
Windows Phone Emulator. This emulator is supposed to load it's own instance of a Windows 8.1 Hyper-V virtual machine
when debugging the Phone Application from Visual Studio 2012 Express.
This Emulator tries to start it's own Hyper-V session inside Windows 8.1. In my humble opinion, it should be possible to do this (load a Windows 8.1 HyperV Virtual Machine inside a "parent" Virtual Machine).
It presents this error message instead:
Essentially, Windows 8.1, running in a Virtual Machine, should also be able to create a Virtual Machine inside it's own Virtual Machine. That is the required design of the Phone Emulator (must be able to intantiate a Windows 8.1 Hyper-V Virtual machine to display
the Phone).
If that does not work, then I guess it must not be a supported configuration. If not, then I need to licence Windows 8.1 on a separate physical computer. Anyone want to tackle this?
+__+

I have a legal, licensed Windows 2008 R2 Server with the Hyper-V Role. I then downloaded the time-limited
Windows 8.1 RTM Evaluation Version and successfully installed. It works flawlessly. Next, I installed the
Windows Phone SDK Update 4 on top of
Visual Studio Express 2012 for Windows Phone.
It all works flawlessly, except for one little problem.
Since I am interested in evaluating and testing the Windows Phone SDK 1080p Emulator, I must run
F5 - Start Debugging in Visual Studio in order to see my Windows Phone application in 1080p resolution. Well, the Emulator
almost completely starts up successfully, but at the last push it gives an error. This error is shown below as a JPEG.
Does anyone know which of the "Hyper-V components is not running?"
+__+

Windows 8.1 message 'your windows licence will expire soon'

Hi,
I bought my HP Pavilion 15-n278sa notebook pc approx 2 months ago with windows 8.1 already pre installed. Just yesterday it come up that "your windows licence will expire soon".. i have not updated windows or anything of the kind. I looked through all my documents that i recieved with this pc, and had a look underneath but cannot find a product key for it. It says activate online on pc settings but when i click on that the expire message just reappears. Is there a way i can retrieve my product key number?
Thanks

Machines that come pre-installed with Windows 8 have the license key embedded in BIOS. For whatever reason your key is being rejected. Phone HP Support in your country /region to ask for assistance with this error. Worldwide numbers can be accessed here>> Contact HP
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Questions about changing a CS4 windows licence to a Mac licence

Good morning,
One of my friends is going to buy a imac computer and his old computer was a PC under windows seven with adobe CS4 web premium student edition.
is it possible to change the CS4 windows licence to a mac licence?
We have to pay something to do this?
I saw on a lot of forum tha twe have to desactivate the licence on the old PC before installing a licence on the new computer, Can you explain how to do his.
Thanks

Hi TFD, It may be helpful to browse or start a thread in this forum:
http://forums.adobe.com/community/creativesuites/creativesuites_windows?view=discussions&s tart=0
Thanks,
eidnolb

Problem with Sessions and window.open

Hi,
Hi everyone,
Help Please!!!
I am working with Sevlet session objects and HTML forms and windows. I have an HTML form for the user to supply a username and password. Once the user clicks submit I need to open another browser window that has no toolbar, no location, no status bar, etc. The user should also be able to go back to that login screen and login again and open a 2nd, 3rd, etc. instance of the application. My problem is that each application is being asigned the same sessionId. I believe it is being asigned to the main login window and thus to the other child windows it opens. Is there a way to work around this? Do I need to make the user open another browser window to login? I need to be able to let the user open multiple instances of the application with unique session ids for each.
Any insight is GREATLY appreciated on this topic. Anything you can tell me about sessions (Java), IE, window.open would help greatly!
THANK YOU IN ADVANCE!!!
MA

To achieve this, you must introduce another level of
abstraction to the Servlet specifications. When you
work with JSP/Servlets you use mostly the HttpSession
to handle user related tasks, and the aplication
context, for things that are common to all users. But
inside the HttpSession scope, you want to create
containers that have 'smaller' scope and are uniquely
identified.
A ipothetical scenario :Let's say that you must have
multiple connections to several databases, on each
database user rights beeing diferrent, and you must be
able to track user actions globaly, and eventualy
capture a 'Close Application event' and close all db.
connections.
1. when the user first accesses the login frame create
the HttpSession. In the HttpSession object, store a
Hastable (let's call it 'ConnectionTable'). Each
object in the Hashtable must identify uniqely a
database connection. Now, to create unique identifiers
ids, make the keys in the hashtable java.lang.Long
objects, created using System.getCurrentTimeMillis().
This guaranties there will be no possible confusion.
From each new open window, on each request to the
server, along with the usefull parameters, send the
connection identifier. When proccessing the request,
select the object from the Hastable wich corresponds
to the ID.
2. Now, the values in the ConnectionTable, must act as
the containers that I mentioned in the first
paragraph. The simplest way to do this is to have
again a Hashtable derived class to do the job, wich
exploses methods similar to HttpSession: setAttibute (
Object key, Object value) and getAttibute ( Object
key, Object value). This container may use internally
a Hashtable to store object, and explose only the
getAttribute and setAttribute methods for clarity. Any
way, this is a problem of implementation. Let's call
this class CustomSession.
Now, a textual activity diagram:
1 user accesses the main page, you start a new
HttpSession; In the HttpSession object, store the
ConnectionTable object.
2. the user enters the userID and pwd and adatabase
name, and a new window is opened. Let's supose the
data entered is valid.
3. when you process the login data, you create a new
CustomSession object. you put in it whatever you would
put in your HttpSession. You generate a unique
identifier using System.CurrentTimeMillis(). Put the
CustomSession object in the ConnectionTable, using the
generated id as key. Send the response.
..... later on .....
100. the user asks for a particular action to be
performed - e.g. a row deletion. The page contains a
form with text field where the user introduces the
row number, a submit button and a hidden input with
the ID.
101. you process the data. Get the ID from the request
object, get the ConnectionTable from the session, get
the CustomSession using the ID as key, do whatever
your logic was doing, but obtaining the objects from
the CustomSession instead of HttpSession
NicNic,
Very slick idea. I think that it could work and it seems that there would be not security issues because the id that you would store on the client side is the Unique Identifier and not the actual Session Id. Do you forsee any security issues for this implementation?

How can I make an icon that links to a webpage that works with Mac and Windows??

Hi!
I burn CDs with my photos and send them to clients. Besides the photos folder, I would like to include a file (similar to the .webloc files on the Mac Desktop) that can be clicked and it will be linked to my website - it will open up a browser window and go to my website . Is it posssible to make one of these icons that works with both Macs and Windows machines? Thanks!

Now it works! Thanks, Denico!
The reason I saved to text: The first time I followed your instructions, it did not work. I tried to figure out what I did wrong and saw that you wrote to "save as plain text." I did not know what this means and there was no option available to save a plain text. So I looked around and saw "save as stationery" and I guessed that maybe that was what you meant. And after that, it worked! But the next thing you know, the icons started duplicating themselves.
I guess I had made a different mistake in the beginning and I fixed it without knowing what it is.
Thanks for clearing that up.
But just one question. WHY does saving as "stationery" make an icon duplicate itself?

T510 and windows 7 licence

Similar Messages

Maybe you are looking for