T510 is not detecting Iomega HDD.

When I connect the Iomega HDD via USB this external equipment isn't detected and don't see any device in disk management. Using windows XP.
When connecting to other computer it works fine and afterwards the HDD is also detected at my laptop but after power down not possible anymore to detect it or first via other PC. Formatted the HDD already complety and changed from FAT32 to NTFS.
Thanks for the feedback.

Somebody any ideas , thanks for the feedback.

Similar Messages

MSI x48c platinum - does not detect SATA HDDs

I am having some problems with a pc build with motherboard not detecting SATA HDDs (MIS x48c Platinum).
I believe I have exhausted all other avenues, and I would appreciate some help if I have missed something obvious.
(details of other components are listed at end of mail).
When I built pc using these components, and went into BIOS settings, the SATA HDD's were not detected. I tried changing BIOS settings, but no difference if SATA, AHCI, or IDE settings.
I removed the HDDs and successfully tested them in another machine (also formatted them while had them istalled in other pc).
IDE optial drives are detected. I have tried to boot with these disconnected to ensure no isues with both IDE and SATA drives connected, but this did not resolve issues.
I have also tried connecting HDD to different onboard SATA ports, and connecting just one drive with no success.
Resetting BIOS defaults, and using clear CMOS reset did not resolve issues either.
Sometimes on boot, it takes a few attempts to boot correctly, and on these occassions I receive an error message "Warning !!! The previous performance of overclocking is failed, and the system is restored to the default settings, Press any key except "DEL" to enter setup ......." I haven't tried to set any over clocking.
I read about a number of issues on MSI forum related to SATA drives which were resolved by BIOS upgrade (mobo was shipped with v.7.0 released 20 March 08). I managed to install an old IDE HDD and flash BIOS, but still no resolution of issues detecting SATA drives (BIOS V.7.2 released 29 July 08).
I've tried everything I can think of at this stage. Is there anything else I should try, or is there something wrong with this motherboard?
Spec:
Motherboard:
343949 MSI X48C Platinum, X48, Socket-775,
DDR2/DDR3, ATX, GbLAN, 2xPCI-Ex(2.0)x1
Other components in build:
CPU Intel Core 2 Quad Q9550
Graphics Sapphire Radeon HD 4870 512MB
HDD 2 x Samsung SpinPoint T166 500GB
RAM 4GB (2x2GB) GeIL DDR3 1333MHz Value Dual Channel (7-7-7-24) PC3-10660
PSU 700W X-Power ATX SLI PSU
ODD DVD & CDR drives from an old pc - IDE connections.

i just remember i had once similar problem with a sata driver. the issue is this you can not adjust everything in bios in one go and expect mobo to know about it. what i mean is this for instance you disable the raid then you save it and exit and then when it reboot you go back to bios and reset another another parameter, you save and exit and on reboot you go back to bios and reset another parameter. i got round the prob that way and it worked and mobo saw the sata HDD. give this a shoot good luck and finally make sure raid is disabled
this is what i would do
1- make sure the jumper setting on your IDE Hdd is correct (Y may have to try this twice as there are two different setting on jumper setting for Master)
2- connect the sata HDD
3-click on power
4-go to bios and disable raid save exit
5-on reboot go back to bios
6--on first option click on it then you should see all devices that can be seen by mobo if you do not see sata HDD you have to click on enable for the auto to see the device once it sees the device save and exit. REMEMBER THE JUMPER SETTING ON IDE HDD CAN CAUSE PROB . SO try the other jumper setting for master, repeat this procedure once more hopefully you get it right

Mainboard did not detect SATA1 HDD

My PC using P965 Platinum Series MS-7238 motherboard, Processor Intel Dual Core 3.0 GHz, 128MB Nvidia G-Force PCI VGA, RAM 1024MB Visipro, HDD 80GB Seagate barracuda 7200rpm SATA1, and I have bought it on 2nd of June 2007. during these periode of time (the date I bought till last week) my PC running well.
Last week 21st of may 2009, I found my PC did not detect my HDD. I have installed the HDD to another PC in order to check whether the problem was caused by my HDD or the motherboard. After I tested the HDD by installing it to another PC, it seems the HDD is in good condition and running well.
After that I try to change the powerd cord and SATA1 cord to the HDD with the brand new one to check if the problem caused by the cords and still my motherboard did not detect the HDD. I am very confused what is wrong with my PC. Please help me to solve this problem so that I can use my PC back.

Hi,
the board has two controllers (ICH8R Primary SATA Controller (SATA Ports 1-6)) and JMicron JMB361 (SATA Port 7)). Which SATA Port is your hard drive connected to? The chance that both onboard SATA Controllers or all SATA Ports have been damaged is very low. Try other SATA ports and see if the situation changes if you connect it to a different controller.
Also, have you cleared CMOS with main A/C power cable removed from PSU to see if that changes anything?

Portege 3500 does not detecting the HDD at the BIOS

Hi forum,
I take out the HDD, when I stick it back; the BIOS didnt detecting the HDD.
How can I set the HDD at the BIOS? The option drives i/o isnt editable.
I need urgent help...
Thanks

Try to access the BIOS and set it back to the default settings. Dont forget to save the changes. ;)
A friend of mine had a similar issue and the BIOS default settings was the key.
So check it out

T420 not detecting second HDD?

I just got my new T420 and everything looks to be ok so far. However, I wanted to add a second HDD in place of the optical drive and it is not being detected by the system. I am using the same adapter and HDD that I had before in my T400, and it still works fine there.
Any ideas on how to troubleshoot this problem?

@Protomic.
Not sure if this will help but see the specs here.
http://shop.lenovo.com/SEUILibrary/controller/e/web/LenovoPortal/en_US/catalog.workflow:item.detail?...
@ahsan,
Good point from tripplec, try to search for Windows Partition tools on Google. There are a few good ones. Or you can use a desktop, plug in the HDD then use Windows retail CD to create partition.
*Non Lenovo employee*
I have a Y2P (i5) ... Feel free to ping me if you want me to test some applications with your Y2P if you have the same model. I don't mind keep doing recovery on it if needed .... =)

W500 Not Detecting correct HDD Size

I am trying to image a W500 using MDT 2010 Update 1.
I have an 80GB HDD Installed (Tried several different Drives)
MDT Is set to Partition the HDD to 100%
The issue is that when it Partitions and formats the HDD it only does 1GB.
I used FDISK to wipe the drive. I even had it format a DOS Partition and FDISK only Formated 1GB as well.
Can anyone help me with what would cause this?
I can image other PC's (Desktop and Laptop) just fine and they get partitioned correctly. Just not this W500.
Solved!
Go to Solution.

Does a Linux LiveCD with partitioning tools work?
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Msi k8m neo-v not detecting SATA HDD

hi,
i am using MSI K8M NEO-V motherboard,
i have read all the threads related to it, and detection of SATA hdd's with it.
i have tried everything except the bios update.
i'v set the jumper to 1.5Gbps
tried different drives but no go
any help would be appreciated,
my system configuration is:
-msi mobo k8m neo-v (ms-7032 ver1) (bios version 3.1)
-hitachi deskstar 80 gb pata-ide hdd,
-1gig sd dd ram
-windows xp professional os
and i am trying to get SAMSUNG 500 GIG HDD (model- HD503HI) to get detected to my mobo
(and yes this 500 gig hdd os ok, it is getting detected in other pc's)

Quote from: Stu on 07-August-10, 23:28:47
If its a SATA-II (3Gb/s) drive, it will probably never work on that board.
VIA VT8237 chipset has known incompatibility issues with SATA 3Gb/s drives, which cannot be fixed. Either try and get hold of a SATA 1.5Gb/s drive, or just use a PATA (IDE) drive instead.
yes bro it is a sata-II 3GB/S drive..
any other workaround??

Upgrading HDD - Not detected

Hello!
I bought a 640GB WD Scorpio Blue HDD from NewEgg for myself for Christmas (:-) and a copy of Snow Leopard, all of which going into my 15" Early 2009 MacBook Pro (No SD Slot). Installation (physical) was a breeze except for the fact that the new HDD does not have the supports sticking out like the original factory HDDs. Therefore, it does not fit properly. That was easily fixed with some folded up electrical tape for the time being. Anyway...I ran the installer and selected restore from Time Machine Backup. I had my external HDD already connected, and it detected it. It took a while to detect the size of the backup (310gb - full HDD) and then it wanted me to choose my new HDD. PROBLEM! My HDD did not show up in the list. I then put my old HDD back in and put the new one in an enclosure to see if it would show up that way - no dice. I went into Disk Utility to see if it was there - No dice. No matter what I do, my computer will NOT detect the HDD. Apple Tech Support was no help - they said to call WDC. I thought of formatting the new HDD, but I can't because it is not detected. What should I do? Please help!
Thanks!
Ross

Apple Support can't help you.
Have you looked at the trouble shooting info on the Internet? For example, you need to be certain the jumpers are correctly set (see http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/stdadp.php?p_faqid=3656&pcreated=#jumper )
I'm sure that are lots of other possible problem areas. You should contact NewEgg for technical assistance.
I thought of formatting the new HDD, but I can't because it is not detected.
If you ever get it working, this is the FIRST thing you will need to do. It comes formatted for Windows 7

Does not detect HDD & CD-ROM!! heeeelp

Hello!!
I recently conected a new motherboard to a friend's computer (MSI 6368). I connected everything, but when I boot, the BIOS does not detect the HDD and the CD-ROM. I think that is something to do with the BIOS configuration, but I dont know much about it and cant figure put what went wrong with it. I tested another HDD to see if the current is damaged, but didn't detect the other also.
I tought that maybe a BIOS update can do something, but I cant update the BIOS from a floppy.
Please can someone help me out with this??? ;(
thanx!!!

has he set the jumpers on the drives right
master /slave or none for a wd drive if on an ide on its own
more detail would help
is the detection on the ide set to auto in the first bios section

FM2-A75ma-p33 does not detect HDD's

The board will not detect the HDD's. There are two of them. They are connected SATA. They are detected by my other PC. I have switched out the power supply unit already. The BIOS will not detect them. I have tried using IDE mode (which wasn't really needed since I am going to be installed Windows 7, but I figured it couldn't hurt). Still did not work.
I cannot update the BIOS through the ZIP or EXE as there isn't an OS on that computer yet. I need the BIOS file in order to do it. How do I get the BIOS file so I can update the BIOS from the utilities in the BIOS?
Any suggestions?

Quote
I cannot update the BIOS through the ZIP or EXE as there isn't an OS on that computer yet.
You don't need an OS. The .exe can be flashed in dos too. Create a boot stick (https://forum-en.msi.com/index.php?topic=165175.msg1209899#msg1209899) and start the .exe from there.

New Airport Extreme -802.11 ac model is not detecting my USB Hard drive

My new Airport Extreme -802.11ac model is not detecing my External USB HDD when connected via the USB port in the Airport Extreme.
I'm using a Seagate USB HDD 3TB, and it's working when i connect my previous generation Airport Extreme router.
Looks like the new version is not detecting my HDD.
Please help.
Cheers
SK

What version of firmware are you running on the 802.11ac?
There is a 7.7.1 update with USB fixes - http://support.apple.com/kb/DL1665
After my update to 7.7.1, I still cannot see the Seagate 3TB HDD.
The disk works on a 2nd Gen 802.11n Extreme.
This is

Can't install Win 8 - Satellite Pro C660 does not detect HDD

Hello,
My HDD has died, so i decided to upgrade my Satellite Pro C660-1D9 to an SSD.
I made a bootable USB with Win8, and booted just fine.
The problem is that it does not detect my SSD so i can proceed with the install.
SSD shows up in BIOS, but not in Windows install.
It says there's a driver missing.
I downloaded AHCI drivers (XP, only ones available) and even then, after selecting the only driver that appears, it says no new devices found.
I tried changing SATA mode from AHCI to Compatibility mode and it's the same..
What can i do?
Thanks for the help.
Best regards,
Bruno Moreira

Older Windows XP required an AHCI driver from Intel but I think this isnt a missing SATA driver issue because as far as I know Windows 8 as well as Win 8.1 already contains the drivers in order to recognize the HDD or SSD drive.
Furthermore the OS installation should be possible even if the driver would not be added... for this procedure you have to use the "compatibility mode".
As you said, the compatibility mode did not work too, so I think there is another problem.
However, Toshiba driver page provides also an Intel RST (Intel Rapid Storage Technology) driver (Windows 8 - Upgrade) which you could try to add while OS installation.
But Im wondering if you would be able to install this Win 8 on common SATA HDD.
Did you try to format the SSD drive using another computer and then to install Win 8?
Try it out.

Laptop does not detect the new HDD

Good afternoon ladies and gentlemen Gameday! I need help.
On my laptop broke down the hard drive. According to reports, a lot of bad sectors, SMART. Decided to put a new HDD. Laptop does not see the new hard drive. In the BOOT MENU new hard drive is not detected.
Old hard drive while still runs in the BOOT menu displays all 3 sections. On the new disk interface is similar to the interface connection on the old disk.
laptop model: 15-e 051 sr.
OS: Win 8
manufacturer of the old hard drive : Hitachi
new hard drive: seagate.
New hard drive on another system checked for operability.
Also, the laptop refused to work with other hard drives: Samsung, Hitachi.
I am sorry for your Books English. For transfers using Google translator.
I look forward to qualified support, despite the language barrier.
Sincerely Sqwosh.

Hi @sqwosh ,
Thank you for your query, I will do my utmost to assist you.
First I would like to let you know that the broken English is not a problem. I understand that Google translation can be a a little rough in the translations. We will work together and I am sure we will do fine!
I grasp that you are trying to replace the hard drive but it is not being recognized in the bios.
Here is a link to the HP Pavilion 15 Notebook PC Maintenance and Service Guide. please note page 57 for a list of supported hard drives. It will also provide information on removal and replacement of the hard drive.
You could also try this.
Once you have the hard installed and connected and you are at the bios screen, you will notice an option to restore defaults along the bottom. ( I believe it is F5) . This will cause it to scan for the hardware and hopefully find your new hard drive.
Please do not hesitate to respond if you require further assistance and good luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Nomad model# DAPAGO1 "Could not detect HDD" error

;Hello,
I see that other people have posted this question but I haven't found any answers. Apparently there was an article about this error on a site called nomadness.com, but that site is now gone. However, the fact that there was an article about it leads me to believe that there may be a solution.
Any help?
The error message I get when I turn it on is:
Critical Error
Could not detect HDD
Shutting down
Thanks

Poking around a little more I see some suggestions about this error being caused when the batteries are too low. I was actually trying to use it plugged in but without batteries. I had put it away and so I took the batteries out. If these batteries don't work can I use regular alkaline batteries? If the HDD is actually bad (I found out that the article that used to be on nomadness.com was about how to replace the HDD) I'm just going to chuck it, but I'd like to see if it can be solved by charging or replacing the batteries.
Thanks

HP PAVILION G6-2229TU LAPTOP HDD NOT DETECT WHILE OS INSTALLATION

Sir
I have hp pavilion g6-2229tu laptop, i am formate and reinstll operating system win7 but hdd not detected while installation select the driver to be installed page are come not showing hdd how to install os, pls help us

Restart windows setup and see if your problem was solved
If your problem doesn't solve after restarting your pc then on the select drive to install windows page press
Shift key + f10 then now Command promopt was opened then type "Diskpart" Now new window was open then type "List disk"
Now If there you will see your Hard disk drive then try the following
type "select disk 0" (0 is your disk number replace 0 with your disk number as shown in window)
now type "clean" Please note Clean command was format your hard disk completely with recovery drive Now type "convert to MBR"
now try to install windows again and see your problem was solved
Enjoy

T510 is not detecting Iomega HDD.

Similar Messages

Maybe you are looking for