[T510] Keyboard combination Shift-Control-X not supported?

I think that on my T510 laptop the keyboard combination Shift-Control-X is unmanageable. When I press this keyboard combination before booting any operation system (i.e. after the bios start screen disappears) I get a system warning sound. I cannot use this keyboard combination in my operating system (Windows 7).
Other similar keyboard combinations are possible (e.g. Shift-Control-Y); there is no warning sound. There is no problem to use this combination in Windows 7.
I would like to use Shift-Control-X. Could it be supported by e.g. a Bios update or is it just not possible because of hardware restrictions?
Thorsten

That makes sense. What you are really asking is how you can program your T510 keys in various combinations. Such things are normally application specific. Have you tried here:
http://www.justanswer.com/sip/Lenovo/computer?r=ppc|ga|6|Computer+%2D+Top+Brands|Lenovo&JPKW=how%20t...

Similar Messages

Shift + Control + Click not working

When I hold down shift + control and then click, it acts as if I'm simply right-clicking. This is making it hard to do assignments for my Graphic Layout class.
Some information (if more is needed, I'd be glad to provide it):
-I'm running the latest version of CS 5.5 for InDesign (7.5.2).
-I have nothing running besides InDesign (no browsers, nothing at all).
-I'm doing this on my laptop (MacBook Pro). I have Parallels (virtual machine software) running Windows 7 and I have InDesign on the Windows side.
-Both my Mac and Windows are completely up to date.
Any ideas on how I can fix this problem?

Are you usually using a pc? Holding down the control key on a mac and clicking pops up the right-click menu in all software, it's a system wide convention (and a relic from the days Apple insisted that users should only be using a single mouse button).
To get the result you are probably looking for, i.e., overrriding a master page item, hold down *Command* and shift on the Mac.

Analysis Control CWDPS not supported?

I tried to use CWDSP.ReFFT in my application, but I got runtime error 30008. It said that I used a function required Measument Studio product for which I am not licenced.
I use Measurement Studio Professional for Visual Basic 6 that come with my Measurement Studio Professional Edition for Windows 2000/XP Ver 7.0 Package.
I don't think that to use CWDPS I have to order another sepecial Edittion.
Do you have any ideal?
Thank You,
Ben Nhan
Attachments:
CableLab-NI-Error.jpg ‏19 KB

Ben,
If you have Measurement Studio 6.0 Professional, you have access to all the base analysis library functions. Please see the product website ( http://sine.ni.com/apps/we/nioc.vp?cid=1413〈=US )for more information about which analysis functions are available for the Professional vs. Enterprise editions.
In your case, the CWDSP.ReFFT() function for 1D-real-array FFT analysis should be available to you in the Measurement Studio Professional edition according to the Product Data Sheet. It looks like you have a corrupt installation, so I would do the following:
1) Uninstall the National Instruments product(s) installed on your computer using the Windows control panel.
2) Double-check that there are no Measurement Studio ActiveX controls rema
ining on your computer at this point by looking in your Windows System32 folder for cwanalysis.ocx, and deleting it if it still exists.
3) Re-install Measurement Studio 6 Professional.
I hope this solves your problem.
David McClelland
National Instruments

Flash AX control not supported on firefox 4

Hi, when i went to play a game on jackpotcity.net i had a pop up message that told me that flash AX control was not supported & not compatible with firefox 4.
I dont have a problem with loading the game on IE.
also i had no problem with it until i installed firefox4.
Is there something i can do to rectify this as i cannot go back to the older 3.6 version of firefox.

Firefox 4 beta on the Android is not compatible with Flash. Mozilla are working with Adobe to add Flash support, but no time scale for when it will work.

Eyedropper Shift/Control on curves RGB

The eyedropper tool using Shift/Control does not index on the curves adjustment in CS6.
It use to work for me in CS5.
Am I doing something wrong or have they changed the short cut keys?
Details:
I am portrait photography and I color correct by the numbers in CYMK via the Info pallet.
1-Use the Color Sample tool to drop a sampling spot.
2-Open Curves layer in RGB.
3-Grab Eyedropper Tool and use to Shift/Control Click to drop a pin on the R, G, B channels to adjust color with CS5.
Cannot get the eyedropper to index on any of the curve channels in CS6.
Any suggestions?

wmphotos is correct.
When you used the eyedropper tool in previous versions a shift-click will set a point on the photo. A control-click visualizes the point on the curves panel for the channel curve that is displayed. A control-shift-click establishes a point on all three channels of the curve (red, green and blue).
The control-click and control-shift-click do not set any points. Setting these points on the curve is the best way to correct color. This need to be fixed, or its a deal-breaker to me.

Air not support img tag on textField?

I try this:
text_txt.htmlText = "<IMG src='myimage.jpg' id='image' />This is my picture";
text_txt.text = text_txt.htmlText ;
on Flash player
out put is : <IMG src='myimage.jpg' id='image' />This is my picture;
but on Air
out put is : This is my picture;
What's happened?
Can you help me?
and Sorry about my english.

Hello,
Any possibility you could use the HTML control instead? The textField control does not support the <img> tag in AIR due to security issues. Here's the comment from the documentation:
For AIR content in the application security sandbox, AIR ignores img tags in HTML content in ActionScript TextField objects. This is to prevent possible phishing attacks.
Thanks,
Chris

The "alt, ctrl and shift" on the left side of my keyboard keys integrated notebook did not work. What should I do?

The "alt, ctrl and shift" on the left side of my keyboard keys integrated notebook did not work. What should I do?

Hi Luis Fernando Garcia,
Thanks for using Apple Support Communities. This article has troubleshooting for keys not working on your keyboard:
One or more keys on the keyboard do not respond
http://support.apple.com/kb/ts1381
Some keys don't work as expected
From the Apple menu, choose System Preferences.
From the View menu, choose Speech.
Click the Text to Speech tab.
If "Speak selected text when the key is pressed" is enabled, the key or key combination set to speak text cannot be used for other purposes or used to type text--click Set Key and change it to a less-commonly used key combination (try to use modifier keys such as Shift, Command, Option, and Control). Or, disable the "Speak selected text when the key is pressed" option.
Click the Universal Access pane in System Preferences, click the Keyboard tab.
Make sure that Slow Keys is turned off. With Slow Keys on, you need to press a key for a longer period of time for it to be recognized.
In the Universal Access pane, click the Mouse tab, and make sureMouse Keys is turned off. With Mouse Keys enabled, you cannot use the Numeric Keypad to enter numbers--instead the keypad moves the pointer (cursor). (There is an option to enable Mouse Keys with five presses of the Option key; you may want to turn that option off to avoid accidentally enabling it.) If Mouse Keys is enabled and you are using a keyboard with no numeric keypad or Num Lock function, seeUnable to type while Mouse Keys is enabled in Mac OS X.
If the function keys on the top row of the keyboard are not working as expected, see Mac OS X: How to change the behavior of function keys.
If the issue persists, use Keyboard Viewer to help isolate the issue:
Click the Language & Text pane (Mac OS X v10.6) or International pane (Mac OS X v10.5.8 or earlier) in System Preferences.
Click the Input Sources tab (or Input Menu tab in Mac OS X 10.5.8 or earlier).
Click the Keyboard & Character Viewer "On" checkbox to select it (click the Keyboard Viewer "On" checkbox in Mac OS X 10.5.8 or earlier).
From the Input (flag) menu, choose Show Keyboard Viewer.
If the keyboard is connected and detected by Mac OS X, the keys you type will highlight in the Keyboard Viewer window. Open TextEdit (or any text application), and try to type something using the keys that were previously not responding to see if they highlight in Keyboard Viewer.
Cheers,
- Ari

Apple TV 3 does not support the Microsoft Wedge Mobile Bluetooth Keyboard

Apple TV (3. Generation) still (17.02.2013) does not support the Microsoft Wedge Mobiloe Keyboard. I bought it especially for use with Apple TV but it doesn't work. Apple TV finds the keyboard with the exact name but can not connect. No 4 digit code appears that you can type in to your keyboard to compelete the connecting process and after a few seconds "connections fails" appears.
Now i dont't know if i should send it back to amazon to get back my money or keep it and wait until it maybe will work some day... I red from articles from beginning of january 2013 that a new Version of Apple TV is in the Pipeline (3.2) and that it has an other bluetooth chip. The same as in the iphone 5 that works with the MS wedge keyboard. So i really don't know if i should wait for the next few updates of my Apple TV or wait for a new Apple TV hardware- Update... Telephone calls with apple and microsoft doesn't brought useful results. Restore function of Apple TV doesn't work.
I hate that Apple always brew their own soup... Bluetooth is know for an easy connection to ALL devices but Apple TV supports only a hand full of keyboards. **** S**t!!!!!!!!!!!! -.-

Hi
This is the solution from Microsoft website. Work fine (don´t forget press and hold Fn key!!):
Connecting the Wedge Mobile Keyboard to a tablet PC
By default, the Bluetooth Wedge Mobile Keyboard pairs with most tablet PCs through secure simple pairing (SSP) with a passkey. Some tablets, however, may not support SSP well with a passkey.
In order to successfully pair your Wedge Mobile Keyboard to such a tablet, use the following alternative pairing mode.
Pair your keyboard through SSP without a passkey
Press and hold the Fn key at the same time as you press and hold the Connect button located under the keyboard. After 3 to 5 seconds, a small light on the top of the keyboard will blink green and red alternately. This means that your keyboard is discoverable to your tablet within 6 minutes.
On your tablet PC, from the Start menu, select Control Panel, and in Category view, locate Hardware and Sound.
Select Add a device.
When the keyboard is listed, select it, and follow the instructions to successfully pair your Wedge Keyboard with your tablet.
Note
If you want to pair your keyboard with a tablet or other computer that supports SSP with a passkey, press and hold the Connect button only.

[BUG] Adobe Bridge does not support OSX 10.10's "Go Back" keyboard shortcut and does not have a custom one.

Adobe Bridge does not support OSX 10.10's "Go Back" keyboard shortcut which is `command + shift + [` and does not have a custom one.
I tried "delete" key which is backspace for Windows. It will do delete identical to "delete X" key (which is delete key for Windows).
Sidenote: `command + shift + \` is to go back in views (switch views), not folder structure.

Exactly where do you want to use a GO BACK "shortcut" in Bridge? Maybe I don't even understand what you mean by Go Back. Bridge is only a file browser, nothing more. It doesn't open, edit, manipulate or save files at all.
Are you simply referring to going back to view a folder that you viewed before?
Please don't take this a criticism. As someone who will gladly pay money not to have to learn any shortcuts at all, I'm just puzzled and curious, that's all.

USB keyboard shift keys suddenly not working

For some reason, when I woke up my MacBook Pro this morning, both shift keys on my aluminium USB keyboard were not working. I'm using the keyboard with a Magic Mouse and LED cinema display connected to my MacBook. When I hold either shift key in combination with any other key, either nothing is typed, or there will be random characters typed, occasionally.
I ran AppleJack on auto to see if there were any problems. There were a few preferences it corrected, but nothing major was wrong. I connected the keyboard to a friend's MacBook Pro, and the shift keys did not work on his machine either. Caps Lock does work. I've tried canned air. I don't remember spilling anything on it.
Any idea about what I can try to get it working, or is it broken? Thanks,
-Jeff

Try resetting the PRAM. Info here:
http://docs.info.apple.com/article.html?artnum=2238

EM10gR2 Grid Control / Change Management Pack does not support TYPE objects

I wonder any Oracle EM10gR2 Grid Control users, implementing Oracle Change Management Pack, have used it for the release and proper packages management.
Issue1 - On an EM console / Web GUI the DDL comparison and synchronization is not supported at all. Implementing it @ customer it appeared that we have to install a 10g Java Client in order to use the code comparison and sync functionalities.
Issue2 - and this is more serious - it appears that even with Java client in use, you cannot compare or sync objects related to TYPE or TYPE BODY data types. The comparison simply hangs.
Asked help from support, they mentioned an ER from 8i and logged a new ER for 10g/11g. That is surprising especially as the doc (http://download.oracle.com/docs/html/A96679_01/toc.htm) about code comparison does not exclude the TYPE objects from the supported options.
Any fellow DBA running to a same problem? What solutions & recommendations might you have?

Hi Mugunthan,
Can you provide links to any tutorial or example (screenshots) of using Setup Manager to transfer something between two environments (say Users or DFFs)?
Thanks,
Gareth

Lumia 1520 does not support Bluetooth Keyboard (HI...

I would very much like to buy a Lumia 1520 as it would spare me from carrying both a phone and a tablet.
However, I am not going to as, for reasons which utterly defeat me, the Bluetooth stack does not support a keyboard. The HID (Human Interface Device) aspect has not been included.
I am utterly baffled by this simple omission. From my Nokia N95 through to my N8 I was able to use a keyboard. I even still have a Nokia one which folds.
Would someone from Nokia be good enough to:-
a. let me know why this bit of simple but basic functionality has been left out?
b. when, if ever, it is likely to be included in an update?

Agreed on all points -
1. Lack of HID support is a glaring omission that needs to be fixed
2. Microsoft is responsible for omitting HID support (which existed in Windows Mobile 6.5!)
3. There is hope for the future when Nokia/Microsoft collaboration is tighter after the merger.
As mentioned above, a WP device can see a bluetooth keyboard - it can even perform the pairing handshake. It generates a random code, you enter the code on the BT keyboard, the two become paired. But then nothing.
I can add a little insight to this conversation: If you were to ask Microsoft folks, the answer would probably go something like this: "We have a finite number of resources. So to support one feature, we'd have to cut something else. What feature would you be willing to lose in exchange for HID support?"
I am basing this on similar conversations I've seen on MSFT discussion boards about support for entire-device backups - not piece-meal app-supported "in the cloud" data storage, but total backup/restore functionality.
I personally think it is embarassing that Windows Phone does not support the HID profile. I know we're getting close. The code is already on Windows RT for tablets. So I sure hope it's in the pipeline for WP. Time will tell I suppose.

Shift-Control-F Does not hightlight text

In older versions of Acrobat Reader, using shift control F would open the search window. If you have already searched, then text would appear in the search window. If you want to search with a new keyword, just press shift control F again and the old text is highlighted so you can write over it. In version 8 and 9 you have to manually erase the text. It was much more efficient in the older version. Is there a preference that can be set. This is a big negative so I don't use the new versions. 99% of what I do is searching for text, so version 8 and 9 are not usable for me.

Hi
in BI 7.0 we have found option locally and globally,where as in 3.5 we have only local view.
if this one u r finding might be installation problem.
config setup which u missed
mahesh

Why voice control/ Siri is not supported in the middile east?

I am trying to use voice control / Siri to get near restaurants, shops. It keep gives me message says can't find restaurants or any place i asked for in Kuwait.
I hope I can find solution for this. It's disappointed If voice control not supported in Kuwait :(
Anyone had this kind of problems with Siri?

I had problems on one of my pages (and only one) under chrome. First the buttons stopped working...they were supposed to branch to another page in the application but instead the url they went to was 'localhost'/the page so of ourse this didn't work. I flixed this by manually adding the whole url for the button. Also strangely enough from this page/tab only clicking on the other tabs does not work. I have yet to work out how to fix this...luckily i have few chrome users. I am considering posting a message warning people not to use chrome...
maybe this will go away when apex 4.0 comes out.... hopefully before many people use chrome...when is 4.0 coming out? Yes I am holding my breath....
(btw you can see that page if you to to www.schedulemail.net and go to the "options" tab.)
Edited by: Emu on Jun 10, 2009 9:01 AM

Camera Connection Kit and MIDI keyboard: device not supported

I have a Roland RD-700SX stage piano and would like to be able to play sounds from my iPad 2 synth app (Sunrizer) via the real keyboard. Got the camera connection kit and plugged into the Roland, but the iPad tells me the RD device is not supported. How do I get it supported?
I've read that there may be issues with iOS 8 (I have 8.1.2). Is that truly the case?

After the original introduction of the iPad 2, Apple reduced to power levels of the 30 pin connector so as to severely limit the type of USB peripherals that can be used with iPads. There is no way, any longer, to use a USB device that draws too much power from iPad's that use the 30-pin connector.
I am not sure if that is still true of newer iPad's that use the Lightning type connector, but you can NOT use any high power USB device with any iPad OR any other older iDevice that uses the older 30-pin connector.
This is NOT an IOS issues or limitation, but a hardware limitation.

[T510] Keyboard combination Shift-Control-X not supported?

Similar Messages

Maybe you are looking for