T510 Media Card Reader and XD card

I have a T500, but just got my daughter a T510. She is now away from home at school and having trouble with the media card reader. Seems it is very different from the one in the T500.
Is there any place I can get instructions on how to use this reader T510 media card reader?
Her camera uses an XD card, which just slips into the T500 reader, but she says that the media reader is a tray in the T510.
Can it read an XD card? If so how does it operate.
Thanks
Solved!
Go to Solution.

From Personal Systems Reference; Lenovo ® ThinkPad ® Notebooks; April 2010 - Version 376
5-in-1 reader (MMC, Memory Stick, Mem Stick Pro, SD, SDHC)
The T510 reader is not compatible with xD cards. She will have to use a usb cable from the camera or get a usb xD carder reader.
T510 4313 CTO i5-520 8GB 250GB win7 64 HD+/ Integrated Graphics Intel 7260.HMWG

Similar Messages

T450s -- Display, NGFF SSD, Smart Card Reader, and m.2 SSD slots

I'm looking to order a T450s and have a few questions about options when configuring the order:
1080 Display -- Does anyone know if the 1080 display (non-touch) is made by LG or AUO or someone else? There was extensive discussion about the T440s, and people got different brands and the AUO was the preferred brand.
16GB m.2 NGFF SSD -- If I remove this option, and want to add a 3rd party compatible NGFF SSD later, can I do this?
3rd m.2 SSD Slot -- The options are None, 3rd m.2 SSD slot, or Smart Card Reader. If I select the Smart Card Reader option, can I later remove the Smart Card Reader and use it as a 3rd m.2 SSD slot? Or, if I select 3rd m.2 SSD slot and later want to use it for a Smart Card Reader, can I buy a Smart Card Reader and plug it into the slot?

Lenovo uses different FHD diplays for the T450s: one by AU Optronics and the other by LG Display.
However, the T450s uses a different LG display than the T440s. The LG screen of the T450s ("
LP140WF3-SPD1") seems to be much better than the LG screen of the T440s.
If you remove the 16GB M.2 SSD option, you can add a M.2 SSD later.
If you have a device with two M.2 slots, you can't use a M.2 SSD and WWAN at the same time.
If you have a device with three M.2 slots, you can only use single-sided M.2 SSDs in the third M.2 slot.
Both the SmartCard reader and the third M.2 slot are attached to the mainboard via a flexible flat cable.
If you choose the SmartCard reader, the warranty might be lost if you want to use the third M.2 slot, because you have to replace some parts that aren't so-called CRUs (consumer replaceable units).

Compaq 6910p Smart card reader and a sim care

I have a compaq 6910p laptop, what is a Smart card reader and the sim card use for

Hey marionholt,
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps!
I worked on behalf of HP

Connection between the ACR122U card reader and an emulated card is failed

Hello,
I write a code to connect the ACR122U card reader and a host-based card emulation on my android 4,4 phone that act as a card. When I run a code, I got this error:
javax.smartcardio.CardException: connect() failed
at sun.security.smartcardio.TerminalImpl.connect(Unknown Source)
at HostCardEmulationCardScanner.run(HostCardEmulationCardScanner.java:18)
at POS$11.actionPerformed(POS.java:567)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
Caused by: sun.security.smartcardio.PCSCException: SCARD_E_SHARING_VIOLATION
at sun.security.smartcardio.PCSC.SCardConnect(Native Method)
at sun.security.smartcardio.CardImpl.<init>(Unknown Source)
... 39 more
what does the "SCARD_E_SHARING_VIOLATION" means?
these are my code line that the error tell:
For POS.java,
@SuppressWarnings("deprecation")
CardTerminal cardTerminal = TerminalUtils.getAvailableTerminal().getCardTerminal();
HostCardEmulationCardScanner cardScanner = new HostCardEmulationCardScanner(cardTerminal);
cardScanner.run();
For HostCardEmulationCardScanne.java
Card card = cardTerminal.connect("direct");
ApduTagReaderWriter readerWriter = new ApduTagReaderWriter(new AcsDirectChannelTag(TagType.ISO_DEP,
null, card));

OK
It's been awile but, I'am sure that we could only
print an index from a card them print photo with that
sys. The G3 was 8.6 upgraded to 9.2 with Photo Shop.
Option was just a thought.
Dennis
Sorry for answering my own question kinda of. I just got my first IMac 3 weeks ago so I am still learning and exploring how to do stuff on my IMac.
Nope in Windows XP it mounts as a network HD under "my computer" and you can copy files to and from any of the cards in printer card reader. It even shows up fine under paralles as network HD drive letter Z:. Does not matter if the printer is connected via USB or Ethernet.
Btw after my first post I started to play with it. I figure a way to manually mount Hp printer's card readers confirmed to work on 2 different printers models Laserjet 2840 and Photosmart 3310. This trick only seems to work if you have your printer connected via ethernet tho. Goto the "Finder" then "Go" then "Connect to a server" and enter "cifs://IP of your printer" dont enter the quote and replace ip of your printer with the ip address of your printer. Btw you must remove the PW protect from printer for this to work. Not sure why if you have a password why it will not work.
So if this work around works to manually mount the card reader in OS X is their a way to make a script or a short cut for mounting the card reader without going and entering the IP of the printer every time I want to use the card reader?

Satelllite A100-773 and WIN 7: Card Reader and Fn-Hotkeys not working

Hi,
I hope that this question was not asked 100 times before. (I haven't found an answer in this forum)
Problem:
Card Reader and FN-Keys are not working, where can i get drivers?
I installed Win 7 Pro on my Satellite A100-773 Notebook. All works fine and Win 7 has all drivers installed but the FN-Keys and the Card Reader are not working.
On the Support Homepage is no driver oder anything given for this Notebook with Win 7.
Can anyone help me with that?
Tahnks.
PS: it was not un upgrade version.

hi at all,
by now i tried the toshiba value added package for serveral model for win 7 and vista, but before finishing the installation there is an error.
the card reader is now working with card reader criver for win vista.
Does no one know how to fix this?!

I connected a USB card reader and can't see it.

I connected a USB card reader and cant find it to download the pictures on the card.

To tell you the truth, I don't know. I am pretty knew to Apple products. I did get the card reader to work. All I did was leave the card reader connected and pulled the card out. I waited a little bit and then reinserted and a pop up window came up with all my pictures. I don't know why it didn't work the first few times I tried it. Thanks for the reply babowa.

SD Card Reader in Express Card slot

I have an iMac with a built in SD card reader and when a card is inserted, it is displayed with a bespoke drive icon showing an image of an SD card. On my MBP I use an SD card reader in the Express Card slot. Is there any way I can make cards inserted in this reader use the same icon as the iMac rather than the generic white External Drive icon?

Is it this one?

X200s--how to change into 5-1 Media card reader and modem

Hi,
I just bought this X200s yesterday. I guess I fogot to check option of 5-1 Media Card Reader ? So, what I am gonna do to upgrade them ? Do any one know how ? Is it possible ?
Thanks
N

http://www.amazon.com/gp/product/B000ZH7J9S/ref=s9_simz_gw_s2_p23_t2?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=c...
there it is !
Thanks
N

Toshiba Satelite L505D-GS6000 usb ports, sd card reader and speakers don't work

OK..
I do not know much about computers and hope that I can find help here.. I had problems with my laptop yesterday to the point where it wouldn't let me do anything. I took it to Bestbuy and the told me that parts of teh computer was disabled. At the time all I realized that all I realized that was disabled was the ability to connect to the internet. I have since found that the touch portion of the mouse does not work. The laptop says that it does not have speakers. I am not able to use the sd card reader or the usb inputs either. I am guessing that somewhere on the computer there is somewhere that I can change the settings and set it up so that these functions are not disabled... Any input that can be offered would be appreciated.. Please keep in mind that I do not know a whole heck of a lot about computers..
-Dan

Satellite L505D-GS6000
Best to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. If it doesn't work right then, you probably have a hardware failure.
See the section Recovering the Internal Storage Drive, which begins on p. 61 of the User's Guide.
Satellite L500 Series User’s Guide
-Jerry

My USB CF Card reader is not mounting on my 2.5 GHZ Intel Core i5 iMac anymore. It was last week and worked fine to get pictures from my camera. Now it won't mount. I have tried another card reader and the same problem exists. Also tried different cards..

Hi
My USB CF (Compact Flash) Card reader is not mounting on my 2.5 GHZ Intel Core i5 iMac anymore.
Last week it worked fine to get pictures from my camera but now it won't mount at all.
I ejected it in the correct way rather than just disconnecting it but now i cannot get it to remount!
I cannot even see it in the disk utility or system profiler.
I have tried another card reader (a brand new one bought today) and the same problem exists. I've also tried different cards to see if that made a difference and they still arent being picked up on the Mac.
I have done all the usual things like rebooting, unplugging all other USB devices and then trying but nothing has worked.
I'm a photographer and I'm at my wits end here. I know the cards are fine as i have been using them without issue and they are also new.
Note: If I plug the camera in directly to the Mac, the Mac picks it up just fine as it always has done. Its just the card readers that it wont pick up anymore.
If anyone has any ideas at all other than the following (my so called friends advice) you'd earn my undting love:
Buy a PC
Use the camera (Thats why i bought the reader in the first place - importing RAW files from the camera is SLOW!)
Replace your CF cards (I have three 8GB cards two of which i had never used til today and they dont work either!)
Buy a new card reader (this is the 5th one in two days - none work on the Mac)
Many thanks in advance!
LIsa

OK, restart in Safe Mode, this will clear some caches. It's possible one or more is corrupt. To restart in Safe Mode when you hear the start up tone hold down the Shift Key until you see a progress bar. Let it fully boot then restart normally and test.
Also I am assuming you have checked Finder - Preferences - General and see what boxes are checked in "Show these items on desktop." You can also mount an item in Disk Utility, simply highlight it and then look in the File menu for Mount.....

Where can I buy a Java Card programmer, reader, and some cards

Greetings,
I'm working on making some activities for a high school computer science club. I want to do things that are tangible and experiential. Specifically, I'd like to setup some Java card labs to modivate Java programming. Can anyone advise me on where to buy cards, programmers and readers?
Thanks very much.

You can buy readers from many companies e.g. Schlumberger/Omnikey/Gemplus & Oberthur.
Java Cards can be bought from Aspects software in a pack of 5 , see http://www.aspectssoftware.com/shop/products.html and also supply an IDE for development of Java Card applets. You can download an evaluation copy for free 60 days from the web-site at http://www.aspectssoftware.com/devtools/restricted/download.html.

I renamed the card reader and now iPhoto doesn't work

i am using a card reader to upload photos to iPhoto. everything works fine until yesterday i renamed the card reader icon (the icon always says "Untitled" but i renamed it to something else) and now it doesn't read anymore. the warning says "Unreadable Files: 1" it's in unrecognized format. i wonder if it has anything to do with renaming the file. what can i do and how can it fix this?

Plearn
Welcome to the Apple user to user assistance forums
yesterday i renamed the card reader icon (the icon always says "Untitled" but i renamed it to something else) and now it doesn't read anymore. the warning says "Unreadable Files: 1" it's in unrecognized format. i wonder if it has anything to do with renaming the file. what can i do and how can it fix this?
Possibly
iPhoto does not see your card reader - it sees the card so renaming it might create a problem since you are writing to the card
Do you have photos on it you need to save? If so give image capture a try (it is in your applications folder) or use the finder -- once you have your photos off of it user your camera to reformat the card (the camera's format command) and see if that cures it (it probably will go back to untitled)
LN

Not recognising USB card reader and also PhotoBooth issue

Hi,
I'm a new member and a bit of a numpty when it comes to Mac (new owner).
My Macbook Pro is giving me some grief tonight and I have 2 separate (i think) issues.
It will not recognise my USB card reader. It worked fine last week and I did eject it properly before removing it. I've tried the card reader on a PC and it is working fine....
Also when I go to open Photo Booth it tells me that my camera is not connected or in use by another program. But as you know the camera is built in!?!?!
I'd be very grateful for any thoughts on how I might fix the problems. The nearest Mac store is 2 hours away....
Many thanks in advance

bigredpaws, welcome to Apple Discussions.
Look at
USB and FireWire Quick Assist
http://support.apple.com/kb/HT1151?viewlocale=en_US
Common fixes for USB device issues (unrecognized, etc.)
http://www.macfixit.com/article.php?story=20070824012114701
 Cheers, Tom

Magnetic card reader and java

hi all
I am doing a project in java in which i need to read the magnetic card reader in my program.so please tell me how to read the text ,that the card reads, in java.Basically my project is to develop an attendence system in java that will use ATM card of the person.I need to read the string that the reader reads, in java.Please help me how to do this.Thanks in eadvanc

Alright,let me give you an idea of what stratergies which we can follow with regards to your requirement assuming that the magenetic card contains just a stream of information.
1).If you are using Magnectic card Over Serial / LPT ports,Try to use Java Communication Api.
write a class using it which pools all the available initiated ports continuosly.If you find ready data avalable with regards to that device connect to that port & then fetch the data and then throgh an event with regards to that data obtained now parse the data accordingly and then use for your business means.
http://java.sun.com/products/javacomm/
http://www.javaworld.com/javaworld/jw-05-1998/jw-05-javadev.html
http://java.sun.com/developer/Books/javaprogramming/cookbook/11.pdf
the above links would guide you through in acheiving the stated solution.
2). If the stated Magenetic Card or Specified device already has a Driver in place and set of native methods(in low level languages) in place.all you ought to do is to make use of JNI and write a native Linking library using JNI specification which can make use of those native methods and export them to java and use them accordingly.
http://java.sun.com/j2se/1.5.0/docs/guide/jni/spec/jniTOC.html
http://www.javaworld.com/javaworld/jw-10-1999/jw-10-jni.html
http://www.ibm.com/developerworks/edu/j-dw-javajni-i.html
Hope the might help you in taking you through :)
REGARDS,
RaHuL

Dell 2407wfp and card reader and Mac Pro

Does the card read work when monitor is plugged into a MacPro?
I did not install any software but just plugged my 2407wfp into my Mac Pro using DVI port and it recognized the montior. I inserted a cf card into the monitor but nothing happend. Do I need to install any software for the usb ports and card readers to work on my Mac Pro?

It should do. What I think you've missed is to connect the USB uplink cable (a standard USB2 A to B) from the display to your MP.

T510 Media Card Reader and XD card

Similar Messages

Maybe you are looking for