T510. Optimus technology support in Win XP

Hello,
Have Lenovo T510 4349-PG9 with optimus technology.
Need to use WinXP SP3 instead of Win7.
I have installed WinXP SP3 with all updates, but can't install NVS 3100M driver. After i switch video card to NVS3100M in BIOS instead of optimus option, i have success. After i switched option back to optimus and after restert...
The same problem as in this topic: http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T500-Hybrid-Graphics-Problem-How-to-blindly...
Laptop is new so i will obtain new one from my provider. Seems that motherboard is broken or something.
So the question in advance is: Does WinXP SP3 support optimus technology or i need to choose Inter or Nvidia video in Bios and use it? And if WinXP supports optimus technology how to install drivers in a proper way?
Thanks in advance!

XP does not support Optimus. You'll have to choose between Intel and nVidia in the BIOS.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Similar Messages

  • Why not optimus technology on the new mac book pro notebooks ?

    Hello why there is no optimus technology in the mac book notebooks? I never had a mac and i am interesting to buy a 17'inch mac book pro, after my excitement on the 2011 model, i thought to my self why do they need to have a dedicated memory for graphics and not for ex. nvidia optimus? I have no idea about mac's, but anyways since i thought i am going to use it for my studies i do need energy efficient notebook, so why apple does not support a new technology ?
    P.s Thank you.

    No one here can answer that!  None of us works for Apple therefore, cannot speak for them.  These are user to user fourms where everyday folk (volunteers) post question & offer answers to each other.
    Suggest that you do research through Google to find answers to your question(s).  Or call or write Apple.  I am quite sure, they will be happy to answer your questions about why they do the things they do.
    Good luck!

  • Will Ideapad G475 supports for Win 8 Pro?

    I had try the Win 8 Enterprise Evaluation Edition which I downloaded from MSDN. I found that the Win 7 Drivers provided by Lenovo Support not all well supported by Win 8. There are few driver even facing installation issues while installing, which is the drivers of Bluetooth, amd video driver, touchpad driver and amd storage matrix driver.
    Although it perform more responsive than win 7 most the time, but with lack of complete support by drivers and some software. So, I reinstalled to Win 7 after few days try.
    Here, I just want to ask to those who had try Win 8 Enterprise Evaluation Edition on G475 about the experience. For information, I found that G475 is not in the win 8 upgrade compatible list provided by Lenovo.
    Thanks in advanced for following reply. Have a nice day everyone

    yo tengo la g475 y si soporta windows 8 con los mismos controladores de windows 7, instale windows 8 y los controladores que habian publicado en su sitio no sirvieron, probé con los controladores de windows 7 y me funcionó perfectamente bien, solo en el caso del controlador de video en programas y características-activar o desactivar características de windows aquí activar la cuadro framework 3.5 se descarga esta aplicaciion y funciona perféctamente el controlador de video. Recuerden que despues de instalr el controlador de video se tiene que activar y descargar el framewotk 3.5 y a disfrutar complétamente win 8 sin problemas.

  • Oracle Database 10g Enterprise version supported on Win 2003/Win 2008?

    Hi,
    The Current version of SAP we are using is SAP R/3 Enterprise 4.7 version (operating system- WINDOW NT )and the database is Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 u2013 Prod
    Please help to advice me:
    Can currently running version of oracle database be supported on Win 2003/Win 2008?
    Can SAP application support the existing oracle database server upgrade to Windows 2003/Win 2008?
    Is it possible to have Oracle database separated to other server on SAP DEV and SAP QA?
    Many thanks in advance.

    Hi,
    You can get more clarity in the [Product Availability Matrix|http://service.sap.com/pam].
    The following notes can help u better.
    [Note 1383873 - Windows Server 2008 R2 Support|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1383873]
    [Note 1303262 - Oracle on Windows Server 2008|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1303262]
    Hope this helps.
    Regards,
    Varadharajan M

  • Can i run windows xp(no virtualization software) in my macbook pro retina 15 inch mid 2012 . all the bootcamp compatible to my laptop support only win 7 or 8.

    can i run windows xp(no virtualization software) in my macbook pro retina 15 inch mid 2012 . all the bootcamp compatible to my laptop support only win 7 or 8.

    Not without using a VM. XP is no longer supported in Boot Camp or on newer Apple computers.

  • MOVED: MSI live update not supported on Win XP 64

    This topic has been moved to Operating Systems.
    MSI live update not supported on Win XP 64

    Yes you are right.  The system drive will always be Drive C, but I am not sure if D will be my storage drive or the other sytem drive.  I could always try and find out but just havn't.
    In the past, I had lots of virtual drives (partitions), and HDD's (as many as 10 total IDE devices).  But when the larger drives became more affordable, I prefer running with just 2, the system and storage for the sake of simplicity.  Since I do beta testing, I have having to reformat and reinstall a lot, so this system has worked great for me.

  • Is it true that JRE5 not supported on Win NT?

    I have read on theweb that JRE5 was not supported under Win NT. Even noticed lots of issues with JRE5 on NT, especially the JFileChooser.
    Where can I find proof that SUN is supporting JRE5 on NT?
    Regards,
    Francois

    http://java.sun.com/j2se/1.5.0/system-configurations.html

  • Oracle Technology Support Champion

    Dear all,
    How to get this certificate.. Oracle Technology Support Champion. am unable to get any details about this..My company needs me to be certified as per some contract with the client.
    Please advise
    Kai

    I would just like to verify for Kai and all, that the Oracle Support Champion is not a part of the Oracle Certification Program. This OPN credential is not an Oracle certification. You may represent yourself as an Oracle Support Champion based on the appropriate OPN guidelines, but you may not represent yourself as "Oracle Certified."
    Regards,
    Brandye Barrington
    Certification Program Manager
    Certification Forum Moderator

  • Face recognition and Optimus technology for T410 questions-plz support

    Hi guys, I bought a T410 with NVS 310 graphic card and integrated webcam. Though the 9 cell battery works really well, I still love to save more power by using the integrated Intel graphic card in light load. This is supposed to be done by using NVIDIA Optimus but I cant' find it anywhere or how to activate it. Some said it depends on the drivers and I haven't try that yet. Plz help for longer time.
    The next question is the face recognition software, as my friend's Asus laptop, it has Smartlogon using face. I really love to do it on my T but I searched so many places and still can't find this. I knew there used to be VeriFace which seems to be stopped developing for Thinkpad. So anyone has that software, plz give me the link.
    And I once found an issue with a device called Lexmark X422, window 7 reports that it can't start (code 10), I try the new driver and still no use. I disable (uninstall) it then restore the whole system and now I can't find it in device manager to try to fix it again. My question is what is this device and how to fix those problems?
    Thank you very much, T rocks!
    Don't get mad, get even
    Solved!
    Go to Solution.

    Hi and welcome to the forum!
    For Optimus, have a look:- http://support.lenovo.com/hk/en/HintsandTips/hints_show_12832190176531.html
    Lexmark X422 was probably your webcam, there is no need to do anything about it if the camera is working fine now.
    Not sure about face recognition, as far as I know there is no such feature for ThinkPads.
    Hope this helps.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • T510/T410 to Support Lenovo Privacy Screen?

    The T400 and T500 had an outstanding privacy screen accessory that snapped right into the laptop without any ugly plastic stick-on tabs.  This model, available at http://www-307.ibm.com/pc/support/site.wss/MIGR-67646.html does not support the T410 or T510.  Will a refreshed privacy screen be available for the new T-series?
    Moderator edit: Fixed typo in link.

    Finally found the privacy screen (43R2474) in stock at Insight Technology Solutions.  Ordered late Friday, shipped Monday, and arrived on Tuesday.  Fits perfectly in the T410 screen without plastic tabs and attaches.  Hope that helps 
    Insight Website:
    https://www.insight.com/search/ppp.web?materialId=43R2474
    Online Installation Instructions:
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/options/thinkpad_privacy_filter_setup_poster.pdf

  • HP Support Assistant (Win 7 x64): Error 1316 on update/install

    HP Support Assistant was running and downloaded an update for itself, which doesn't install properly. I am left with shortcuts that no longer work - HSPA.exe is missing.
    I went direct to HP site, downloaded HSPA latest version, and tried to install.
    I get toward the end of the instal...
    Then get this error:
    Then HSPA unintalls itself...
    Then I get a final Windows error:
    I have tried a System Restore, but it doesn't work (no restore point early enough).
    Can you help me fix this problem?
    (Unlike some other posts, I really LIKE HSPA and want to keep using it.)
    I am using Win 7 Ultimate x64 on an Envy 1104-tx.
    Please help!!

    Unfortunately, it doesn't fix the problem because now it won't install via Control Panel:
    I select the HPSA and ask to uninstall:
    I get the message that it's preparing to remove...
    Then it "crashes" with the same error as before:
    Now what should I do? I would really like to get HPSA working again.
    PLEASE HELP

  • New Realplayer 10.5 with Harmony Technology supports Zen produ

    hi,
    not sure if anyone knew about this but the New Realplayer 0.5 with Harmony Techology supports Zen products. It's a free download as well. It even works with my zen micro.
    Just wanted to share this information. Maybe it might help those having trouble with WMP or Zen explorer/creative mediasource.....just another alternati've worth trying........
    Also, I found it convenient that instead of dragging and dropping files into zen micro....you can just highlight/select the mp3s you want to transfer in the music library, right click, select copy to --> zen micro...and that's it...very easy all in one step...
    <SPAN class=time_text>Products supported and their drivers can be found on this page:
    <SPAN class=time_text>http://music.guide.real.com/realplayerdevices
    <SPAN class=time_text>
    Message Edited by Tiger23 on 0-2-2005 0:06 PM

    It's nice that someone else is using the Real Player 0.5 with Harmony Technology and thinks it is as great as I do.
    I have the Creative Zen Micro and my husband has the Nomad Muvo TX 256. After trying all the other players, including the, iTunes, Music Match, Windows Media Player 0 and the Creative Mediasource that was sent with our Creative Players, we both found ourselves using Real Player 0.5. It is so much easier to use and the Harmony Technology actually was the reason that I bought us the Creative players for Christmas.
    As a computer age newbie, married to a computer geek, am surprised that we both ended up using the Real Player 0.5 on our seperate computers. (His uses Windows XP and I use Windows 2000) Hope everyone will give it a try.
    Best wishes.

  • S205 :Sad with Lenovo Driver support for Win 8

    Sorry for my bad english, but I need to tell you my frustrating experience.
    Due to low cost new windows 8 OS 64bit, I buy a lincense for mine Lenovo S205, conforted with some new Driver updated for 8 on Lenovo site.
    I saw something strange in the Driver's page for ex. the wireless driver is called Cybertan\LiteOn and we have a Ralink RT 3090 wifi module.(or in some market Atheros AR9285)... Hummm realy strange.
    I cross my fingers, I pray god and I start downloadin ALL the driver and start upgrading my system.
    At restart I have my new Win8 64bit system and thank of god the most important driver (Ralink wifi) was autodetected and recognized by Win8  whitout install the strange Cybertan\LiteOn from Lenovo that doubt was working in a ralink device.
    But at this point strarts the big issues with the unrecognized devices, that tahnks of god were less than expected but drivers fron Lenovo site were all wrong !!!!! Yes wrong, it seems a joke but was the true, 
    I think,(to tell the true I'm sure) no one from Lenovo tech checked the drivers in a S205 models, and I can explain why with the above sad experience:
    - SOUND: windows only install generic HD drivers and the sound quality as expected was crappy. So I try the lenovo driver Conexant but it does not properly work, SmatAudio icon in the ControlPannel was not present, no conexant pannel to manage sound, and nothing changed, windows continue with is own generym Microsoft HD drivers. I remeber that Lenovo model U300S and U300E have the same soundcard I dowload their Conexant Win8 driver (with a different number so I hope it was teh latest) and my idea was great, the Conexant U300 driver works on my S205 lenovo and Win8 detect the conexant soundcard and SmartAudio is present and working. There is only a isse concerning SRS Sound that is present on my system but if I try to lounch nothing appens, so I think is not correctly working. But so far so god sound is better than before with generic MS drivers, but to do so I have to choose a different driver from a different Lenovo pc, not an easy step for a normal user.
    - OSD: on screen display (FN+F keys) in 7 they was insert in the Lenovo Energy Mnagement, so to works you need to instal it. I make the same in win 8 with the new Lenovo Energy Management provides by Lenovo site, Lenovo Energy Management is working but OSD no !!!!
    Windows 8 detect and show you in autonomy soud level and brightnes when you press FN+Arrow keys ant that are the most important but ALL the FN+F Keys are not showed on screen even if probably they are working (for ex. Fn+F6 correctly enabel1disable touchpad) but not icon showen on screen !! Well I can leave without OSD but once again seems Lenovo don't try EnergyManagement on a Win8 pc.
    - CARD READER: Windows detect and unknow device called USB CRW and I though correctly was the card reader, in fact I try a sd and win8 was not able to read it. So I install the Realtek CardReader downloaded from Lenovo site, It was extracted and installed but I don't know why the driver seems bugged, the pattern contains only some icon but not exe ord driver, in fact the Card reader even if I try the driver more times it was not decetced. I tryed the old Windows 7 driver for my S205 and thank of god it was working and now my cardreader is detected and working. Once angain the win8 driver provided by Lenovo fails and I need the oldest win 7 driver that maks the job.
    - TOUCHPAD: Synaptics touchpad was detected by windows 8 but all the basic features as the scrolling or 2 fingers was not working. So I try the Synaptics drivers provided by Lenovo and it was only for 32bit system even if is clearly showed as 32 and 64bit driver. The driver itself promp me that is not working on a 64bit system and i need to contact the producer :-(
    Hahahaha very hilarious so I have to download the driver from Synaptics server that is so slow that I need 2 hours to finaly have my touchpad driver. Once again an epic fail from lenovo site.
    CONCLUSION: Lenovo is the new n.1 pc producer in the world but it seems realy not professional when check his drivers and public it on the website. Could be s205 is the cheapest and not business line notebook but ... I am realy sad whit the way Lenovo put new drivers without any preventive control in the homesite driver's page.
    It seems it was a lottery, extracting a number and put the corresponding driver on the S205 drivers page :-(
    Sir this is not the good behaviour, is the bast way to loose users !!!! Very disappointed, very sad and I hope this post can help S205 users taht want use the new Windows 8 system to catch the correct solutions
    I hope too some Lenovo developers can read this, try win8 on a s205 notebook and solve all the problems, because even if I solve with my 20 years pc experience all the issue, still remais some problems as SRS Sound seems not working (if It can work on our system, but if it can't why put in on our s205 driver too) and no OSD for every FN keys working.
    There are not present some utility for win 8 as for example the CAPSLOCK keys utility that was present for 7 but not for 8 (I have to try if the older work on 8) or the Lenovo OneKey that seems not ready for 8..
    So far so good winodws 8 works great on S205 and is a good choice if you catch the correct drivers as I explain here.
    Hoping this help Lenovo not making the same mistakes in the future, and learn from their errors.
    Once angain sorry for my language mistake but I'm not English
    Hore this post can help in some case
    Bye

    Hi Romagnolo1973!
    Thank you for posting all the things you learned, and how you got your S205 working with Windows 8! Hopefully this will help others. 
    To be fair to Lenovo, they list Windows 8 as not supported on the S205.
    http://download.lenovo.com/express/WIN8-INDEX.html
    As you found, it is sometimes possible to work around the problems and get things working to your satisfaction!
    I don't work for Lenovo. I'm a crazy volunteer!

  • Nvidia optimus technology and arch, discrete card failed , 650M

    Dell 7720 SE with nvidia gt 650m ddr5
    2 weeks ago when I finally had time to play I've notice that my graphic card is no usable...
    I've just run pacman -Syu (full sys upgrade including kernel(3.10.7-1) nvidia blobs(325) and bbswitch) and still doesn't work.
    I did googling but with no luck...
    dmesg
    5.803245] bbswitch: version 0.7
    [ 5.803252] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
    [ 5.803256] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
    [ 5.803467] bbswitch: detected an Optimus _DSM function
    [ 5.803478] pci 0000:01:00.0: enabling device (0006 -> 0007)
    [ 5.803509] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
    [ 5.804851] bbswitch: disabling discrete graphics
    [ 5.966211] r8169 0000:03:00.0 enp3s0: link down
    [ 5.966241] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
    [ 5.966465] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 5.974112] iwlwifi 0000:02:00.0: Radio type=0x2-0x0-0x0
    [ 6.036706] pci 0000:01:00.0: power state changed by ACPI to D3cold
    [ 6.135248] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 6.135258] Bluetooth: BNEP socket layer initialized
    [ 6.185781] Bluetooth: RFCOMM TTY layer initialized
    [ 6.185795] Bluetooth: RFCOMM socket layer initialized
    [ 6.185797] Bluetooth: RFCOMM ver 1.11
    [ 6.329709] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 6.337391] iwlwifi 0000:02:00.0: Radio type=0x2-0x0-0x0
    [ 6.522907] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
    [ 6.587136] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
    [ 7.104538] wlp2s0: authenticate with 80:c6:ab:29:3c:cf
    [ 7.110459] wlp2s0: send auth to 80:c6:ab:29:3c:cf (try 1/3)
    [ 7.113349] wlp2s0: authenticated
    [ 7.114204] wlp2s0: associate with 80:c6:ab:29:3c:cf (try 1/3)
    [ 7.117650] wlp2s0: RX AssocResp from 80:c6:ab:29:3c:cf (capab=0x411 status=0 aid=3)
    [ 7.137362] wlp2s0: associated
    [ 7.137394] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
    [ 41.227793] EXT4-fs (sda6): re-mounted. Opts: data=ordered,discard,commit=0
    [ 41.267668] EXT4-fs (sda5): re-mounted. Opts: data=ordered,discard,commit=0
    [ 41.269547] EXT4-fs (sdb8): re-mounted. Opts: errors=remount-ro,commit=0
    [ 41.270913] EXT4-fs (sdb12): re-mounted. Opts: commit=0
    [ 41.272242] EXT4-fs (sdb11): re-mounted. Opts: errors=remount-ro,commit=0
    [ 41.273767] EXT4-fs (sdb7): re-mounted. Opts: errors=remount-ro,commit=0
    [ 93.894389] bbswitch: enabling discrete graphics
    [ 94.315418] pci 0000:01:00.0: power state changed by ACPI to D0
    [ 94.377760] nvidia: module license 'NVIDIA' taints kernel.
    [ 94.377764] Disabling lock debugging due to kernel taint
    [ 94.382299] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
    [ 94.382441] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 1
    [ 94.382445] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 325.15 Wed Jul 31 18:50:56 PDT 2013
    [ 94.501693] nvidia 0000:01:00.0: irq 48 for MSI/MSI-X
    [ 100.106633] NVRM: GPU at 0000:01:00.0 has fallen off the bus.
    [ 100.106643] NVRM: os_pci_init_handle: invalid context!
    [ 100.106646] NVRM: os_pci_init_handle: invalid context!
    [ 100.106652] NVRM: GPU at 0000:01:00.0 has fallen off the bus.
    [ 100.106657] NVRM: os_pci_init_handle: invalid context!
    [ 100.106660] NVRM: os_pci_init_handle: invalid context!
    [ 100.129507] NVRM: RmInitAdapter failed! (0x25:0x28:1157)
    [ 100.129518] NVRM: rm_init_adapter(0) failed
    Xorg.8
    94.409] (II) Loading sub module "ramdac"
    [ 94.409] (II) LoadModule: "ramdac"
    [ 94.409] (II) Module "ramdac" already built-in
    [ 94.411] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 94.411] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 94.411] (==) NVIDIA(0): RGB weight 888
    [ 94.411] (==) NVIDIA(0): Default visual is TrueColor
    [ 94.411] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 94.411] (**) NVIDIA(0): Option "NoLogo" "true"
    [ 94.411] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
    [ 94.411] (**) NVIDIA(0): Option "UseEDID" "false"
    [ 94.411] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
    [ 94.411] (**) NVIDIA(0): Enabling 2D acceleration
    [ 94.411] (**) NVIDIA(0): Ignoring EDIDs
    [ 94.411] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
    [ 94.411] (**) NVIDIA(0): mode
    [ 100.036] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
    [ 100.036] (EE) NVIDIA(0): check your system's kernel log for additional error
    [ 100.036] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
    [ 100.036] (EE) NVIDIA(0): README for additional information.
    [ 100.036] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
    [ 100.036] (EE) NVIDIA(0): Failing initialization of X screen 0
    [ 100.036] (II) UnloadModule: "nvidia"
    [ 100.036] (II) UnloadSubModule: "shadow"
    [ 100.036] (II) UnloadSubModule: "wfb"
    [ 100.036] (II) UnloadSubModule: "fb"
    [ 100.036] (EE) Screen(s) found, but none have a usable configuration.
    [ 100.036] (EE)
    Fatal server error:
    [ 100.036] (EE) no screens found(EE)
    [ 100.036] (EE)
    lukasz@lukasz-dell7720~$ cat /etc/bumblebee/bumblebee.conf
    # Configuration file for Bumblebee. Values should **not** be put between quotes
    ## Server options. Any change made in this section will need a server restart
    # to take effect.
    [bumblebeed]
    # The secondary Xorg server DISPLAY number
    VirtualDisplay=:8
    # Should the unused Xorg server be kept running? Set this to true if waiting
    # for X to be ready is too long and don't need power management at all.
    KeepUnusedXServer=false
    # The name of the Bumbleblee server group name (GID name)
    ServerGroup=bumblebee
    # Card power state at exit. Set to false if the card shoud be ON when Bumblebee
    # server exits.
    TurnCardOffAtExit=false
    # The default behavior of '-f' option on optirun. If set to "true", '-f' will
    # be ignored.
    NoEcoModeOverride=false
    # The Driver used by Bumblebee server. If this value is not set (or empty),
    # auto-detection is performed. The available drivers are nvidia and nouveau
    # (See also the driver-specific sections below)
    Driver=
    # Directory with a dummy config file to pass as a -configdir to secondary X
    XorgConfDir=/etc/bumblebee/xorg.conf.d
    ## Client options. Will take effect on the next optirun executed.
    [optirun]
    # Acceleration/ rendering bridge, possible values are auto, virtualgl and
    # primus.
    Bridge=auto
    # The method used for VirtualGL to transport frames between X servers.
    # Possible values are proxy, jpeg, rgb, xv and yuv.
    VGLTransport=proxy
    # List of paths which are searched for the primus libGL.so.1 when using
    # the primus bridge
    PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
    # Should the program run under optirun even if Bumblebee server or nvidia card
    # is not available?
    AllowFallbackToIGC=false
    # Driver-specific settings are grouped under [driver-NAME]. The sections are
    # parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
    # detection resolves to NAME).
    # PMMethod: method to use for saving power by disabling the nvidia card, valid
    # values are: auto - automatically detect which PM method to use
    # bbswitch - new in BB 3, recommended if available
    # switcheroo - vga_switcheroo method, use at your own risk
    # none - disable PM completely
    # https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
    ## Section with nvidia driver specific options, only parsed if Driver=nvidia
    [driver-nvidia]
    # Module name to load, defaults to Driver if empty or unset
    KernelDriver=nvidia
    PMMethod=auto
    # colon-separated path to the nvidia libraries
    LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
    # comma-separated path of the directory containing nvidia_drv.so and the
    # default Xorg modules path
    XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
    XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
    ## Section with nouveau driver specific options, only parsed if Driver=nouveau
    [driver-nouveau]
    KernelDriver=nouveau
    PMMethod=auto
    XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
    Last edited by str0gg (2013-08-21 17:42:18)

    I've done some testing...
    Basic setup also doesn't work I use 325.15-3.
    Strage thing is that my girlfriend laptop with 740M works like charm with and with out bumblebee.
    Xorg
    [ 5.840]
    X.Org X Server 1.14.2
    Release Date: 2013-06-25
    [ 5.840] X Protocol Version 11, Revision 0
    [ 5.840] Build Operating System: Linux 3.9.7-1-ARCH x86_64
    [ 5.840] Current Operating System: Linux lukasz-dell7720 3.10.7-1-ARCH #1 SMP PREEMPT Thu Aug 15 11:55:34 CEST 2013 x86_64
    [ 5.840] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=aece893b-42f6-43f7-a108-a56f3a47dfaa rw quiet
    [ 5.840] Build Date: 01 July 2013 10:48:42AM
    [ 5.840]
    [ 5.840] Current version of pixman: 0.30.2
    [ 5.840] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 5.840] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 5.841] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Aug 21 19:08:22 2013
    [ 5.881] (==) Using config file: "/etc/X11/xorg.conf"
    [ 5.881] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 5.920] (==) No Layout section. Using the first Screen section.
    [ 5.920] (==) No screen section available. Using defaults.
    [ 5.920] (**) |-->Screen "Default Screen Section" (0)
    [ 5.920] (**) | |-->Monitor "<default monitor>"
    [ 5.920] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 5.920] (**) | |-->Device "Device0"
    [ 5.920] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 5.920] (==) Automatically adding devices
    [ 5.920] (==) Automatically enabling devices
    [ 5.920] (==) Automatically adding GPU devices
    [ 5.973] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 5.973] Entry deleted from font path.
    [ 6.010] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 6.010] Entry deleted from font path.
    [ 6.010] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 6.020] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 6.020] Entry deleted from font path.
    [ 6.020] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 6.020] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 6.020] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 6.020] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 6.030] (II) Loader magic: 0x7fdc20
    [ 6.031] (II) Module ABI versions:
    [ 6.031] X.Org ANSI C Emulation: 0.4
    [ 6.031] X.Org Video Driver: 14.1
    [ 6.031] X.Org XInput driver : 19.1
    [ 6.031] X.Org Server Extension : 7.0
    [ 6.031] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 6.031] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 6.032] (--) PCI:*(0:0:2:0) 8086:0166:1028:0578 rev 9, Mem @ 0xf1000000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64
    [ 6.032] (--) PCI: (0:1:0:0) 10de:0fd1:1028:0578 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128
    [ 6.060] Initializing built-in extension Generic Event Extension
    [ 6.061] Initializing built-in extension SHAPE
    [ 6.061] Initializing built-in extension MIT-SHM
    [ 6.061] Initializing built-in extension XInputExtension
    [ 6.061] Initializing built-in extension XTEST
    [ 6.061] Initializing built-in extension BIG-REQUESTS
    [ 6.061] Initializing built-in extension SYNC
    [ 6.061] Initializing built-in extension XKEYBOARD
    [ 6.061] Initializing built-in extension XC-MISC
    [ 6.061] Initializing built-in extension SECURITY
    [ 6.061] Initializing built-in extension XINERAMA
    [ 6.061] Initializing built-in extension XFIXES
    [ 6.061] Initializing built-in extension RENDER
    [ 6.061] Initializing built-in extension RANDR
    [ 6.061] Initializing built-in extension COMPOSITE
    [ 6.061] Initializing built-in extension DAMAGE
    [ 6.061] Initializing built-in extension MIT-SCREEN-SAVER
    [ 6.061] Initializing built-in extension DOUBLE-BUFFER
    [ 6.061] Initializing built-in extension RECORD
    [ 6.061] Initializing built-in extension DPMS
    [ 6.061] Initializing built-in extension X-Resource
    [ 6.061] Initializing built-in extension XVideo
    [ 6.061] Initializing built-in extension XVideo-MotionCompensation
    [ 6.061] Initializing built-in extension XFree86-VidModeExtension
    [ 6.061] Initializing built-in extension XFree86-DGA
    [ 6.061] Initializing built-in extension XFree86-DRI
    [ 6.061] Initializing built-in extension DRI2
    [ 6.061] (II) LoadModule: "glx"
    [ 6.160] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 7.173] (II) Module glx: vendor="NVIDIA Corporation"
    [ 7.173] compiled for 4.0.2, module version = 1.0.0
    [ 7.173] Module class: X.Org Server Extension
    [ 7.173] (II) NVIDIA GLX Module 325.15 Wed Jul 31 18:12:00 PDT 2013
    [ 7.180] Loading extension GLX
    [ 7.180] (II) LoadModule: "nvidia"
    [ 7.180] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 7.321] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 7.321] compiled for 4.0.2, module version = 1.0.0
    [ 7.321] Module class: X.Org Video Driver
    [ 7.333] (II) NVIDIA dlloader X Driver 325.15 Wed Jul 31 17:50:57 PDT 2013
    [ 7.333] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 7.340] (++) using VT number 7
    [ 7.348] (EE) No devices detected.
    [ 7.348] (EE)
    Fatal server error:
    [ 7.348] (EE) no screens found(EE)
    [ 7.348] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 7.348] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 7.348] (EE)
    Xorg8
    [ 135.986]
    X.Org X Server 1.14.2
    Release Date: 2013-06-25
    [ 135.986] X Protocol Version 11, Revision 0
    [ 135.986] Build Operating System: Linux 3.9.7-1-ARCH x86_64
    [ 135.986] Current Operating System: Linux lukasz-dell7720 3.10.7-1-ARCH #1 SMP PREEMPT Thu Aug 15 11:55:34 CEST 2013 x86_64
    [ 135.986] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=aece893b-42f6-43f7-a108-a56f3a47dfaa rw quiet
    [ 135.987] Build Date: 01 July 2013 10:48:42AM
    [ 135.987]
    [ 135.987] Current version of pixman: 0.30.2
    [ 135.987] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 135.987] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 135.987] (==) Log file: "/var/log/Xorg.8.log", Time: Tue Aug 20 21:45:58 2013
    [ 135.987] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
    [ 135.987] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
    [ 135.988] (==) ServerLayout "Layout0"
    [ 135.988] (==) No screen section available. Using defaults.
    [ 135.988] (**) |-->Screen "Default Screen Section" (0)
    [ 135.988] (**) | |-->Monitor "<default monitor>"
    [ 135.988] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 135.988] (**) | |-->Device "DiscreteNvidia"
    [ 135.988] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 135.988] (**) Option "AutoAddDevices" "false"
    [ 135.988] (**) Option "AutoAddGPU" "false"
    [ 135.988] (**) Not automatically adding devices
    [ 135.988] (==) Automatically enabling devices
    [ 135.988] (**) Not automatically adding GPU devices
    [ 135.988] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 135.988] Entry deleted from font path.
    [ 135.988] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 135.988] Entry deleted from font path.
    [ 135.988] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 135.988] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 135.988] Entry deleted from font path.
    [ 135.988] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 135.988] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 135.988] (++) ModulePath set to "/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules"
    [ 135.988] (==) |-->Input Device "<default pointer>"
    [ 135.988] (==) |-->Input Device "<default keyboard>"
    [ 135.988] (==) The core pointer device wasn't specified explicitly in the layout.
    Using the default mouse configuration.
    [ 135.988] (==) The core keyboard device wasn't specified explicitly in the layout.
    Using the default keyboard configuration.
    [ 135.988] (II) Loader magic: 0x7fdc20
    [ 135.988] (II) Module ABI versions:
    [ 135.988] X.Org ANSI C Emulation: 0.4
    [ 135.988] X.Org Video Driver: 14.1
    [ 135.988] X.Org XInput driver : 19.1
    [ 135.988] X.Org Server Extension : 7.0
    [ 135.988] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 135.988] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 135.988] setversion 1.4 failed
    [ 135.990] (--) PCI:*(0:1:0:0) 10de:0fd1:1028:0578 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128
    [ 135.990] Initializing built-in extension Generic Event Extension
    [ 135.990] Initializing built-in extension SHAPE
    [ 135.990] Initializing built-in extension MIT-SHM
    [ 135.990] Initializing built-in extension XInputExtension
    [ 135.990] Initializing built-in extension XTEST
    [ 135.990] Initializing built-in extension BIG-REQUESTS
    [ 135.990] Initializing built-in extension SYNC
    [ 135.990] Initializing built-in extension XKEYBOARD
    [ 135.990] Initializing built-in extension XC-MISC
    [ 135.990] Initializing built-in extension SECURITY
    [ 135.990] Initializing built-in extension XINERAMA
    [ 135.990] Initializing built-in extension XFIXES
    [ 135.990] Initializing built-in extension RENDER
    [ 135.990] Initializing built-in extension RANDR
    [ 135.990] Initializing built-in extension COMPOSITE
    [ 135.990] Initializing built-in extension DAMAGE
    [ 135.990] Initializing built-in extension MIT-SCREEN-SAVER
    [ 135.990] Initializing built-in extension DOUBLE-BUFFER
    [ 135.990] Initializing built-in extension RECORD
    [ 135.990] Initializing built-in extension DPMS
    [ 135.990] Initializing built-in extension X-Resource
    [ 135.990] Initializing built-in extension XVideo
    [ 135.990] Initializing built-in extension XVideo-MotionCompensation
    [ 135.990] Initializing built-in extension XFree86-VidModeExtension
    [ 135.990] Initializing built-in extension XFree86-DGA
    [ 135.990] Initializing built-in extension XFree86-DRI
    [ 135.990] Initializing built-in extension DRI2
    [ 135.990] (II) LoadModule: "glx"
    [ 135.991] (II) Loading /usr/lib/nvidia/xorg/modules/extensions/libglx.so
    [ 136.081] (II) Module glx: vendor="NVIDIA Corporation"
    [ 136.081] compiled for 4.0.2, module version = 1.0.0
    [ 136.081] Module class: X.Org Server Extension
    [ 136.081] (II) NVIDIA GLX Module 325.15 Wed Jul 31 18:12:00 PDT 2013
    [ 136.082] Loading extension GLX
    [ 136.082] (II) LoadModule: "nvidia"
    [ 136.082] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 136.092] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 136.092] compiled for 4.0.2, module version = 1.0.0
    [ 136.092] Module class: X.Org Video Driver
    [ 136.093] (II) LoadModule: "mouse"
    [ 136.093] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
    [ 136.094] (II) Module mouse: vendor="X.Org Foundation"
    [ 136.094] compiled for 1.14.0, module version = 1.9.0
    [ 136.094] Module class: X.Org XInput Driver
    [ 136.094] ABI class: X.Org XInput driver, version 19.1
    [ 136.094] (II) LoadModule: "kbd"
    [ 136.094] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
    [ 136.094] (II) Module kbd: vendor="X.Org Foundation"
    [ 136.094] compiled for 1.14.0, module version = 1.7.0
    [ 136.094] Module class: X.Org XInput Driver
    [ 136.094] ABI class: X.Org XInput driver, version 19.1
    [ 136.094] (II) NVIDIA dlloader X Driver 325.15 Wed Jul 31 17:50:57 PDT 2013
    [ 136.094] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 136.095] (--) using VT number 7
    [ 136.096] (II) Loading sub module "fb"
    [ 136.096] (II) LoadModule: "fb"
    [ 136.096] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 136.097] (II) Module fb: vendor="X.Org Foundation"
    [ 136.097] compiled for 1.14.2, module version = 1.0.0
    [ 136.097] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 136.097] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 136.097] (II) Loading sub module "wfb"
    [ 136.097] (II) LoadModule: "wfb"
    [ 136.097] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 136.098] (II) Module wfb: vendor="X.Org Foundation"
    [ 136.098] compiled for 1.14.2, module version = 1.0.0
    [ 136.099] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 136.099] (II) Loading sub module "shadow"
    [ 136.099] (II) LoadModule: "shadow"
    [ 136.099] (II) Loading /usr/lib/xorg/modules/libshadow.so
    [ 136.099] (II) Module shadow: vendor="X.Org Foundation"
    [ 136.099] compiled for 1.14.2, module version = 1.1.0
    [ 136.099] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 136.099] (II) Loading sub module "ramdac"
    [ 136.099] (II) LoadModule: "ramdac"
    [ 136.099] (II) Module "ramdac" already built-in
    [ 136.101] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 136.101] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 136.101] (==) NVIDIA(0): RGB weight 888
    [ 136.101] (==) NVIDIA(0): Default visual is TrueColor
    [ 136.101] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 136.101] (**) NVIDIA(0): Option "NoLogo" "true"
    [ 136.102] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
    [ 136.102] (**) NVIDIA(0): Option "UseEDID" "false"
    [ 136.102] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
    [ 136.102] (**) NVIDIA(0): Enabling 2D acceleration
    [ 136.102] (**) NVIDIA(0): Ignoring EDIDs
    [ 136.102] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
    [ 136.102] (**) NVIDIA(0): mode
    [ 141.532] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
    [ 141.532] (EE) NVIDIA(0): check your system's kernel log for additional error
    [ 141.532] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
    [ 141.532] (EE) NVIDIA(0): README for additional information.
    [ 141.532] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
    [ 141.532] (EE) NVIDIA(0): Failing initialization of X screen 0
    [ 141.533] (II) UnloadModule: "nvidia"
    [ 141.533] (II) UnloadSubModule: "shadow"
    [ 141.533] (II) UnloadSubModule: "wfb"
    [ 141.533] (II) UnloadSubModule: "fb"
    [ 141.533] (EE) Screen(s) found, but none have a usable configuration.
    [ 141.533] (EE)
    Fatal server error:
    [ 141.533] (EE) no screens found(EE)
    [ 141.533] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 141.533] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
    [ 141.533] (EE)
    [ 141.533] (EE) Server terminated with error (1). Closing log file.
    Kernel.log ->  haven't found any thing interesting
    Aug 21 19:08:22 lukasz-dell7720 kernel: [ 0.000000] Initializing cgroup subsys cpuset
    Aug 21 19:08:22 lukasz-dell7720 kernel: [ 0.000000] Initializing cgroup subsys cpu
    Aug 21 19:08:22 lukasz-dell7720 kernel: [ 0.000000] Initializing cgroup subsys cpuacct
    Aug 21 19:08:22 lukasz-dell7720 kernel: [ 0.000000] Linux version 3.10.7-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.1 20130725 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Aug 15 11:55:34 CEST 2013
    Aug 21 19:08:22 lukasz-dell7720 kernel: [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=aece893b-42f6-43f7-a108-a56f3a47dfaa rw quiet
    Aug 21 19:08:22 lukasz-dell7720 kernel: [ 0.000000] e820: BIOS-provided physical RAM map:
    Aug 21 19:08:22 lukasz-dell7720 kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    Aug 21 19:08:22 lukasz-dell7720 kernel: [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    Aug 21 19:08:22 lukasz-dell7720 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    Aug 21 19:08:22 lukasz-dell7720 kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000a8c54fff] usable
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000a8c55000-0x00000000a8e56fff] reserved
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000a8e57000-0x00000000b7cfdfff] usable
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000b7cfe000-0x00000000baeeefff] reserved
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000baeef000-0x00000000baf9efff] ACPI NVS
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffffffff] reserved
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043f5fffff] usable
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] NX (Execute Disable) protection: active
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] SMBIOS 2.7 present.
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] DMI: Dell Inc. Dell System Inspiron 7720/04M3YM, BIOS A15 05/17/2013
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] No AGP bridge found
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] e820: last_pfn = 0x43f600 max_arch_pfn = 0x400000000
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] MTRR default type: uncachable
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] MTRR fixed ranges enabled:
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] 00000-9FFFF write-back
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] A0000-BFFFF uncachable
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] C0000-FFFFF write-protect
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] MTRR variable ranges enabled:
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] 0 base 0FF800000 mask FFF800000 write-protect
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] 1 base 000000000 mask F80000000 write-back
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] 2 base 080000000 mask FC0000000 write-back
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] 5 base 100000000 mask F00000000 write-back
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] 6 base 200000000 mask E00000000 write-back
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] 7 base 400000000 mask FC0000000 write-back
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] 8 base 43F800000 mask FFF800000 uncachable
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] 9 base 43F600000 mask FFFE00000 uncachable
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] Scanning 1 areas for low memory corruption
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] init_memory_mapping: [mem 0x43f400000-0x43f5fffff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] [mem 0x43f400000-0x43f5fffff] page 2M
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] init_memory_mapping: [mem 0x43c000000-0x43f3fffff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] [mem 0x43c000000-0x43f3fffff] page 2M
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] init_memory_mapping: [mem 0x400000000-0x43bffffff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] [mem 0x400000000-0x43bffffff] page 2M
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] [mem 0x40000000-0x40003fff] page 4k
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] BRK [0x01b27000, 0x01b27fff] PGTABLE
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] init_memory_mapping: [mem 0x40005000-0xa8c54fff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] [mem 0x40005000-0x401fffff] page 4k
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] [mem 0x40200000-0xa8bfffff] page 2M
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] [mem 0xa8c00000-0xa8c54fff] page 4k
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] init_memory_mapping: [mem 0xa8e57000-0xb7cfdfff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] [mem 0xa8e57000-0xa8ffffff] page 4k
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] [mem 0xa9000000-0xb7bfffff] page 2M
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] [mem 0xb7c00000-0xb7cfdfff] page 4k
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] init_memory_mapping: [mem 0xbafff000-0xbaffffff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] [mem 0xbafff000-0xbaffffff] page 4k
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] RAMDISK: [mem 0x3724a000-0x3791cfff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: RSDP 00000000000f0120 00024 (v02 DELL )
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: XSDT 00000000baffe170 0009C (v01 DELL QA09 00000002 LOHR 00000002)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: FACP 00000000bafe4000 0010C (v05 DELL QA09 00000002 LOHR 00000002)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: DSDT 00000000baff2000 0A7C4 (v02 DELL IVB-CPT 00000000 INTL 20061109)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: FACS 00000000baf7c000 00040
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: SSDT 00000000baffd000 00166 (v01 DELL PtidDevc 00001000 INTL 20061109)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: ASF! 00000000baff1000 000A5 (v32 DELL QA09 00000002 LOHR 00000002)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: HPET 00000000bafee000 00038 (v01 DELL QA09 00000002 LOHR 00000002)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: APIC 00000000bafed000 00098 (v01 DELL QA09 00000002 LOHR 00000002)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: MCFG 00000000bafec000 0003C (v01 DELL QA09 00000002 LOHR 00000002)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: FPDT 00000000bafeb000 00064 (v01 DELL QA09 00000002 LOHR 00000002)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: SSDT 00000000bafea000 00926 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: SSDT 00000000bafe9000 00A92 (v01 PmRef CpuPm 00003000 INTL 20061109)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: UEFI 00000000bafe8000 0003E (v01 DELL QA09 00000002 LOHR 00000002)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: UEFI 00000000bafe7000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: POAT 00000000bafe6000 00055 (v03 DELL QA09 00000002 LOHR 00000002)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: SSDT 00000000bafe3000 00EB6 (v01 NvORef NvOptTbl 00001000 INTL 20061109)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: UEFI 00000000bafe2000 0027E (v01 DELL QA09 00000002 LOHR 00000002)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: DBG2 00000000bafe0000 00070 (v00 DELL QA09 00000002 LOHR 00000002)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] No NUMA configuration found
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043f5fffff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x43f5fffff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] NODE_DATA [mem 0x43f5e9000-0x43f5edfff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042ec00000-ffff88043ebfffff] on node 0
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] Zone ranges:
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] Normal [mem 0x100000000-0x43f5fffff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] Movable zone start for each node
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] Early memory node ranges
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] node 0: [mem 0x20200000-0x40003fff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] node 0: [mem 0x40005000-0xa8c54fff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] node 0: [mem 0xa8e57000-0xb7cfdfff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] node 0: [mem 0xbafff000-0xbaffffff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] node 0: [mem 0x100000000-0x43f5fffff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] On node 0 totalpages: 4157080
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] DMA zone: 64 pages used for memmap
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] DMA zone: 21 pages reserved
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] DMA32 zone: 11684 pages used for memmap
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] DMA32 zone: 747772 pages, LIFO batch:31
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] Normal zone: 53208 pages used for memmap
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] Normal zone: 3405312 pages, LIFO batch:31
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: IRQ0 used by override.
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: IRQ2 used by override.
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: IRQ9 used by override.
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] nr_irqs_gsi: 40
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] PM: Registered nosave memory: 00000000a8c55000 - 00000000a8e57000
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] PM: Registered nosave memory: 00000000b7cfe000 - 00000000baeef000
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] PM: Registered nosave memory: 00000000baeef000 - 00000000baf9f000
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] PM: Registered nosave memory: 00000000baf9f000 - 00000000bafff000
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] PM: Registered nosave memory: 00000000bb000000 - 00000000bfa00000
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000f8000000
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff980000
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] PM: Registered nosave memory: 00000000ff980000 - 0000000100000000
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88043f200000 s86016 r8192 d20480 u262144
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] pcpu-alloc: s86016 r8192 d20480 u262144 alloc=1*2097152
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4092103
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] Policy zone: Normal
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=aece893b-42f6-43f7-a108-a56f3a47dfaa rw quiet
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] Checking aperture...
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] No AGP bridge found
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] Memory: 16280384k/17815552k available (4942k kernel code, 1187232k absent, 347936k reserved, 4026k data, 1124k init)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] Preemptible hierarchical RCU implementation.
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] NR_IRQS:4352 nr_irqs:744 16
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] Console: colour dummy device 80x25
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] console [tty0] enabled
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] allocated 67108864 bytes of page_cgroup
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] hpet clockevent registered
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000000] tsc: Fast TSC calibration using PIT
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.003333] tsc: Detected 2394.679 MHz processor
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4791.91 BogoMIPS (lpj=7982263)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000004] pid_max: default: 32768 minimum: 301
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000031] Security Framework initialized
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000038] AppArmor: AppArmor disabled by boot time parameter
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.000902] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.004937] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.006753] Mount-cache hash table entries: 256
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.006914] Initializing cgroup subsys memory
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.006922] Initializing cgroup subsys devices
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.006924] Initializing cgroup subsys freezer
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.006925] Initializing cgroup subsys net_cls
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.006927] Initializing cgroup subsys blkio
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.006951] CPU: Physical Processor ID: 0
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.006952] CPU: Processor Core ID: 0
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.006956] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.006956] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.007328] mce: CPU supports 9 MCE banks
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.007338] CPU0: Thermal monitoring handled by SMI
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.007347] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.007347] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.007347] tlb_flushall_shift: 1
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.007481] Freeing SMP alternatives: 20k freed
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.008433] ACPI: Core revision 20130328
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.013781] ACPI: All ACPI Tables successfully acquired
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.014046] ftrace: allocating 19649 entries in 77 pages
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.023722] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.056756] smpboot: CPU0: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (fam: 06, model: 3a, stepping: 09)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.056763] TSC deadline timer enabled
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.056771] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver.
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.056777] ... version: 3
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.056778] ... bit width: 48
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.056779] ... generic registers: 4
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.056780] ... value mask: 0000ffffffffffff
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.056781] ... max period: 000000007fffffff
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.056782] ... fixed-purpose events: 3
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.056782] ... event mask: 000000070000000f
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.095030] CPU1: Thermal monitoring handled by SMI
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.097234] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.115415] CPU2: Thermal monitoring handled by SMI
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.135807] CPU3: Thermal monitoring handled by SMI
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.156206] CPU4: Thermal monitoring handled by SMI
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.176590] CPU5: Thermal monitoring handled by SMI
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.196990] CPU6: Thermal monitoring handled by SMI
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.083552] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.217377] CPU7: Thermal monitoring handled by SMI
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.219491] Brought up 8 CPUs
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.219495] smpboot: Total of 8 processors activated (38330.31 BogoMIPS)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.226721] devtmpfs: initialized
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.228405] PM: Registering ACPI NVS region [mem 0xbaeef000-0xbaf9efff] (720896 bytes)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.229168] RTC time: 17:08:16, date: 08/21/13
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.229205] NET: Registered protocol family 16
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.229317] ACPI: bus type PCI registered
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.229319] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.229379] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.229381] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.235513] PCI: Using configuration type 1 for base access
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.236205] bio: create slab <bio-0> at 0
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.236321] ACPI: Added _OSI(Module Device)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.236322] ACPI: Added _OSI(Processor Device)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.236323] ACPI: Added _OSI(3.0 _SCP Extensions)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.236325] ACPI: Added _OSI(Processor Aggregator Device)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.237637] ACPI: EC: Look up EC in DSDT
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.238916] ACPI: Executed 2 blocks of module-level executable AML code
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.273294] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.273719] ACPI: SSDT 00000000bae8e018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.274053] ACPI: Dynamic OEM Table Load:
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.274055] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.290169] ACPI: SSDT 00000000bae8fa98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.290528] ACPI: Dynamic OEM Table Load:
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.290530] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.306710] ACPI: SSDT 00000000bae8dd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.307036] ACPI: Dynamic OEM Table Load:
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.307038] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.322023] ACPI: Interpreter enabled
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.322030] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.322034] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.322046] ACPI: (supports S0 S3 S4 S5)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.322048] ACPI: Using IOAPIC for interrupt routing
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.322072] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.322162] ACPI: No dock devices found.
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.327537] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.327650] \_SB_.PCI0:_OSC invalid UUID
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.327651] _OSC request data:1 8 0
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.328199] PCI host bridge to bus 0000:00
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.328202] pci_bus 0000:00: root bus resource [bus 00-3e]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.328204] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.328206] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.328208] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.328209] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.328216] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.328286] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.328316] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.328343] pci 0000:00:01.0: System wakeup disabled by ACPI
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.328378] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.328388] pci 0000:00:02.0: reg 10: [mem 0xf1000000-0xf13fffff 64bit]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.328395] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.328400] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.328487] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.328511] pci 0000:00:14.0: reg 10: [mem 0xf1600000-0xf160ffff 64bit]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.328583] pci 0000:00:14.0: PME# supported from D3hot D3cold
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.328606] pci 0000:00:14.0: System wakeup disabled by ACPI
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.328642] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.328666] pci 0000:00:16.0: reg 10: [mem 0xf1615000-0xf161500f 64bit]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.328743] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.328814] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.328836] pci 0000:00:1a.0: reg 10: [mem 0xf161a000-0xf161a3ff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.328929] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.328963] pci 0000:00:1a.0: System wakeup disabled by ACPI
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.329000] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.329016] pci 0000:00:1b.0: reg 10: [mem 0xf1610000-0xf1613fff 64bit]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.329086] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.329143] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.329272] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.329307] pci 0000:00:1c.0: System wakeup disabled by ACPI
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.329344] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.329424] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.329453] pci 0000:00:1c.4: System wakeup disabled by ACPI
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.329491] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.329513] pci 0000:00:1d.0: reg 10: [mem 0xf1619000-0xf16193ff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.329606] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.329638] pci 0000:00:1d.0: System wakeup disabled by ACPI
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.329672] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.329820] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.329839] pci 0000:00:1f.2: reg 10: [io 0x4098-0x409f]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.329848] pci 0000:00:1f.2: reg 14: [io 0x40bc-0x40bf]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.329856] pci 0000:00:1f.2: reg 18: [io 0x4090-0x4097]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.329864] pci 0000:00:1f.2: reg 1c: [io 0x40b8-0x40bb]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.329872] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.329881] pci 0000:00:1f.2: reg 24: [mem 0xf1618000-0xf16187ff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.329929] pci 0000:00:1f.2: PME# supported from D3hot
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.329983] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.330003] pci 0000:00:1f.3: reg 10: [mem 0xf1614000-0xf16140ff 64bit]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.330024] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.330135] pci 0000:01:00.0: [10de:0fd1] type 00 class 0x030000
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.330147] pci 0000:01:00.0: reg 10: [mem 0xf0000000-0xf0ffffff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.330160] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.330173] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.330181] pci 0000:01:00.0: reg 24: [io 0x3000-0x307f]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.330190] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.330251] pci 0000:01:00.0: System wakeup disabled by ACPI
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.336686] pci 0000:00:01.0: PCI bridge to [bus 01]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.336691] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.336696] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf0ffffff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.336702] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.336869] pci 0000:02:00.0: [8086:0887] type 00 class 0x028000
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.336917] pci 0000:02:00.0: reg 10: [mem 0xf1500000-0xf1501fff 64bit]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.337149] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.337195] pci 0000:02:00.0: System wakeup disabled by ACPI
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.343435] pci 0000:00:1c.0: PCI bridge to [bus 02]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.343443] pci 0000:00:1c.0: bridge window [mem 0xf1500000-0xf15fffff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.343537] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.343557] pci 0000:03:00.0: reg 10: [io 0x2000-0x20ff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.343592] pci 0000:03:00.0: reg 18: [mem 0xf1404000-0xf1404fff 64bit pref]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.343614] pci 0000:03:00.0: reg 20: [mem 0xf1400000-0xf1403fff 64bit pref]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.343708] pci 0000:03:00.0: supports D1 D2
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.343710] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.343748] pci 0000:03:00.0: System wakeup disabled by ACPI
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.350049] pci 0000:00:1c.4: PCI bridge to [bus 03]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.350067] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.350076] pci 0000:00:1c.4: bridge window [mem 0xf1400000-0xf14fffff 64bit pref]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.350141] \_SB_.PCI0:_OSC invalid UUID
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.350142] _OSC request data:1 1f 0
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.350145] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.350147] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.350564] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.350613] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.350660] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.350707] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.350753] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.350800] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.350848] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.350895] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.351109] ACPI: Enabled 5 GPEs in block 00 to 3F
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.351116] acpi root: \_SB_.PCI0 notify handler is installed
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.351193] Found 1 acpi root devices
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.351254] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.351344] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.351349] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.351350] vgaarb: loaded
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.351351] vgaarb: bridge control possible 0000:01:00.0
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.351352] vgaarb: no bridge control possible 0000:00:02.0
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.351380] PCI: Using ACPI for IRQ routing
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.352967] PCI: pci_cache_line_size set to 64 bytes
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.353061] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.353062] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.353064] e820: reserve RAM buffer [mem 0xa8c55000-0xabffffff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.353065] e820: reserve RAM buffer [mem 0xb7cfe000-0xb7ffffff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.353066] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.353067] e820: reserve RAM buffer [mem 0x43f600000-0x43fffffff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.353139] NetLabel: Initializing
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.353141] NetLabel: domain hash size = 128
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.353141] NetLabel: protocols = UNLABELED CIPSOv4
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.353152] NetLabel: unlabeled traffic allowed by default
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.353166] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.353170] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.355186] Switching to clocksource hpet
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.358789] pnp: PnP ACPI init
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.358800] ACPI: bus type PNP registered
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.358826] pnp 00:00: [dma 4]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.358844] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.358925] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.358952] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.358987] system 00:03: [io 0x0680-0x069f] has been reserved
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.358989] system 00:03: [io 0x1000-0x1003] has been reserved
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.358991] system 00:03: [io 0x1004-0x1013] has been reserved
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.358993] system 00:03: [io 0xffff] has been reserved
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.358994] system 00:03: [io 0x0400-0x0453] has been reserved
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.358996] system 00:03: [io 0x0458-0x047f] has been reserved
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.358999] system 00:03: [io 0x0500-0x057f] has been reserved
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.359000] system 00:03: [io 0x164e-0x164f] has been reserved
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.359003] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.359024] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.359063] system 00:05: [io 0x0454-0x0457] has been reserved
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.359066] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.359103] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.359130] pnp 00:07: Plug and Play ACPI device, IDs DLL0578 PNP0f13 (active)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.359224] pnp 00:08: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.359241] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.359243] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.359245] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.359246] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.359248] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.359250] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.359252] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.359253] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.359255] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.359257] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.359259] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.359474] pnp: PnP ACPI: found 9 devices
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.359475] ACPI: bus type PNP unregistered
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.365717] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.365748] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x80000)
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.365750] pci 0000:00:01.0: PCI bridge to [bus 01]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.365752] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.365755] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf0ffffff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.365757] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.365761] pci 0000:00:1c.0: PCI bridge to [bus 02]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.365768] pci 0000:00:1c.0: bridge window [mem 0xf1500000-0xf15fffff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.365779] pci 0000:00:1c.4: PCI bridge to [bus 03]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.365783] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.365790] pci 0000:00:1c.4: bridge window [mem 0xf1400000-0xf14fffff 64bit pref]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.365948] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.365950] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.365952] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.365953] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.365955] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.365956] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf0ffffff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.365958] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.365960] pci_bus 0000:02: resource 1 [mem 0xf1500000-0xf15fffff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.365961] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.365963] pci_bus 0000:03: resource 2 [mem 0xf1400000-0xf14fffff 64bit pref]
    Aug 21 19:08:23 lukasz-dell7720 kernel: [ 0.365985] NET: Registered protocol family 2
    Aug 2

  • T510 Optimus problem

    After some hardware issues (see: http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T510-black-screen-not-booting-anymore/m-p/4...) with my T510 I called lenovo service and a technician had to switch the motherboard.
    Now I have a new problem: I can't activate Optimus, which was definitely working before. I did some search and in my BIOS there is no entry for activating Optimus. Only the driver for the NVM 3100M is working.
    Is it possible, that an old motherboard without Optimus was installed? I bought my T510 3 months ago with a definitely working Optimus.
    I have a 4384-GEG with BIOS 1.43
    Bloodkite

    They must have put the wrong board in.

Maybe you are looking for