T510 Screen resolutions error?

To my knowledge, the screen resolution of 15,6" models should be as follows:
HD: 1366 x 768
HD+: 1600 x 900
FHD: 1920 x 1080
Then why on European Lenovo websites all T510 models are listed as 15.6 " HD+ AntiGlare 1366x768 ??
Here is Italy, Germany and Denmark.

Good question.
The Lenovo european sites haven't been as good and accurate as they used to be.
The system you linked to is described on the supprt site as follows;
Product: ThinkPad T510 4349-4JG
Original description: i7-620M(2.66GHz), 4GB RAM, 320GB 7200rpm HD, 15.6in 1600x900 LCD, 512MB nVIDIA Quadro NVS 3100M, CDRW/DVDRW, Intel 802.11agn, Gobi2000 WWAN, Bluetooth, Modem, 1Gb Ethernet, UltraNav, Secure chip, Fingerprint reader, Camera, 9c Li-Ion, Win7 Pro 64
The european sites are simply wrong.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Similar Messages

Yahoo is giving screen resolution error for my Sony Vaio laptop at 1600 x 900

My laptop display had no screen resolution problem before upgrading to 3.6.10. The error states I should set to 1024 x 768 pixel resolution. This is less than that I already have. I don't understand why this occurs.

Please see added comments on the question. Its not a zoom issue its all about the new ATT design email and Firefox, I agree with Noah there a bug between the old and the new and firefox only.
UPDATE:
I stand corrected. I went back in again and did the reset zoom and it appears to eliminate the error. Problem solved but I am not sure why I never set up zoom and didn't have the problem on any other site. Will it need to be done each and every time I go into that page or is it now corrected?

Loading Yahoo mail causes screen resolution error

Whenever I load Yahoo mail in FF7, I get an error message saying my screen resolution is too low. However, my resolution is 1440 by 900, the native setting. This only happens in FF7, never in other browsers. It also happens when I use Firefox's zoom setting. Seems like that trips it up.

When I zoom in on the page, my resolution drops down to 96 by 96 in the first test and to 900 by 600 on the second test, both of which are lower than the recommended value. So why does zooming in only affect this browser and not IE9, Opera or Chrome?

T510 Screen Resolution

I have a new T510 Thinkpad with the 15.6 inch widescreen. It appears the max resolution is 1366x768, which leaves everything too big. Is there a way to increase the resolution, and what would a good resolution be for this size monitor?
Solved!
Go to Solution.

Hi eco_julie:
Unfortunately, that is probably your display's maximum resolution. If you just purchased the machine, I would recommend that you return the unit and purchase another with a higher resolution display. Lenovo offered a 1600 x900 or a 1900 x 1080 (Full High Definition).
The T510 that I use has the 1900x1080 and it is superb. It's rare to see a company offer a matte finish display, let alone one with such a high resolution. There are times where I do find the font size too small as I web browse. I zoom in to 110-120% and it works beaufitully. Don't compromise in this area. I owned an HP with that 1366 x 768 screen resolution and it became unbearable.
chl
T520 Core i5-2540M (2.60GZH) - 500GB SSD - 8.0GB - Blu-Ray - FHD

Screen Resolution error

I got a Macbook Pro 13" Retina yesterday and installed Premiere CC 2014 on it, once i want to start premiere I get this error message.
I am pretty sure that I don't have a lower resolution than the one needed and I have no clue what to do now...
Here are my specs (if needed):
I've never had a problem like this and I'm a little confused to be honest.
If you need more informations ask me for them, I have no clue what more to include in this..
I'm looking forward for you help,
Thanks

I have the same error and am unsure what to do next. Any help advice would be greatly appreciated

My AT&T Yahoo email gives me an error message saying that my screen resolution is too low, but it is at 1600 x 900. This only happens in Firefox, not in IE.

When I try to use Firefox to access my ATT.NET account I get an error message about my screen resolution being to low to support the site.My resolution is not low its at the highest available. I also use IE9 and do not have this problem. I am running Windows 7 and Firefox 15.0.1. This has been an ongoing problem. I am using a Toshiba laptop 15.6 screen with 4GB RAM. I see other complaints about this specific problem but have yet to find a solution. Thanks for your help.

Please see added comments on the question. Its not a zoom issue its all about the new ATT design email and Firefox, I agree with Noah there a bug between the old and the new and firefox only.
UPDATE:
I stand corrected. I went back in again and did the reset zoom and it appears to eliminate the error. Problem solved but I am not sure why I never set up zoom and didn't have the problem on any other site. Will it need to be done each and every time I go into that page or is it now corrected?

External screen resolution "defaults" to low-rez (T510, docked; Samsung SyncMaster 730b monitor)

I have a T510 Thinkpad with docking station (Windows XP) with Samsung SyncMaster 730b monitor. Every time I start up, it defaults to low resolution and I need to manually increase the screen resolution. Is there a way to make the default setting for the external monitor is high-resolution?
Thanks!

hey ct-user,
it is hard to say if this is caused by the external monitor or by the docking station.
try having the the external monitor connected to the T510 and see if it "saves" the resolution that was previously set.
also, test the external monitor on a different laptop and see if the same issue occurs.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

After target display mode, iPhoto reports an error, "The current screen resolution is not optimal for iPhoto."

I have the 27-inch (late 2009) iMac with mini-Display port input. Whenever I return from Target Display Mode, I get the attached error message and iPhoto becomes unresponsive (the window is still active, but clicking on it produces the error/warning system sound), I have to Force Quit it. The current screen resolution is not optimal for iPhoto (sometimes the error message is a little off the screen in the lower left and only the top of the window can be seen. This also seems to affect iTunes at the same time (by resizing the window to be super small), but without the error message or unresponsiveness.
Has anyone else gotten this problem, and or might know of a fix?

Yes, I have the same problem. I have checked the resolution in Sysyem Preferences - display and it is properly set to the highest resolution (which is recommended). I have no idea why this is ocurring but it is annoying.

Satellite M40: Graphic Errors when changing screen resolution

Hi,
I have a Satellite M40 and a big problem.
in windows xp pro sp2:
when a program changes the screen resolution, the screen gets messed up,
I see only stripes and only a restart can get it back working (or suspend to disk).
[edit]
I plugged an external monitor to the laptop and it works,
the laptop screen is full of lines and the 2nd monitor shows what the laptop screen should normally also show
[/edit]
in linux:
this can be also seen when changing from the xwindow mode in linux back to tty(1-6)
Here are some pictures of this strange behavior:
http://www.ronnylindner.de/extern/images/toshiba/screen1.jpg
http://www.ronnylindner.de/extern/images/toshiba/screen2.jpg
http://www.ronnylindner.de/extern/images/toshiba/screen3.jpg
It looks like a hardware problem, but could it be just a wrong bios setting?
What can I do?
Bye and thanks in advance, Ronny
Message was edited by: [email protected]_DE

I will try it with the Toshiba graphics driver, at the moment I use the newest Omega driver
I use 1280x800 as normal resolution
programs giving this error:
world of warcraft (1024x768) -> working with 1280x800
age of empires 2 (800x600)
as I said before, I get this problem also using Suse Linux when I switch from KDE to tty
thanks you too, hope we can get it working together :-)
[edit]
strange, using the Toshiba display driver I got the problem at the first try (aoe2), but now it is not reproducable :-(
[/edit]
Message was edited by: [email protected]_DE

Error msg: your sys doesn't have required screen resolution

Just downloaded & installed Presenter 9 trial version on my Win 7 system. My screen resolution only has two available settings, and neither one matches the precise resolution setting that the error msg says my system needs. What do I do?

It is due to the cable that you are using. For DVI, there are 2 main type of cables in the market, DVI-D Single Link & DVI-D Dual Link.
Extract from Wikipedia
If you are using a DVI-D Single Link cable, the max resolution natively is 3,840 × 2,400 @ 17 Hz, which is unusable under normal usage. The next best max resolution is 1440 × 900 @ 60 Hz which is usable under normal usage.
However, if you are using DVI-D Dual Link cable (not referring to Dual Monitor support here), the max resolution natively is 3,840 × 2,400 @ 33 Hz with GTF blanking, which is also unusable under normal usage. The next best max resolution is 2,560 × 1,600 @ 60 Hz with CVT-RB blanking, which is usable under normal usage.
For full information, please refer to this link at Wiki. http://en.wikipedia.org/wiki/Digital_Visual_Interface

T510 max screen resolution is 1366 x 768?

Hi anyone,
Got a new T510 and the mex screen resolution I can get is 1366 x 768?
Is that correct?
I have been using 1680 x 1050 on T61 so I feel like I;ve gone backwards in 3 years.
Does anyone know ho I can get a higher res?
mkozma

Hi and welcome to the forum!
What is 7 character product number of your T510? It looks like 2668-KHU and can be found on the bottom sticker, please don't post the S/N, thanks!
Keep us posted.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Changed screen resolution in error

I accidentally changed the screen display for the mac mini and it went black and now says "please change display resolution." How can I change the resolution without seeing the display?

Hi
I have the same problem as Henryhbmains and I have tried exactly what you describe without positive result.
One thing I do not understand is that Apple OSX does not have a "safety switch" like in other operating systems where you have to confirm within 15 seconds or the screen resolution will automatically switch back.
I have now wasted a lot of time and what I hoped to be my first time happily with a Mac turned out to be my first time with a Mac wasting a lot of time and getting so disappointed.
Would you have any other suggestions - that would be very helpful
Thank you

Yoga 2 Pro REAL Screen Resolution

SECOND THREAD on this HERE.
I've just discovered that the Yoga 2 Pro seems to be fudging its screen resolution claim. I wouldn't care, except ... it actually has become a small problem ... and one that I presume will get bigger over time
The Y2P has a "3200x1800" screen. It's beautiful. And in most regards its also overkill, since there's no such thing as 3200x1800 content, AND because it cause some issues with size of things on the screen. For this reason, and because pushing fewer pixels will tend to improve battery life, I run my Y2P at 1920x1080, or "normal full HD" resolution.
I recently tried to log into an on-line app I use, as was greeted with a strange error message:
Well, since I'm running 1920x1080 and using a current version of the Chrome browswer, none of that made sense. I tried Internet Explorer as well ... no luck.
I installed Speccy, a tool to check things out inside a computer, and when I got to the display settings, here's what I found:
That's right; I'm "set to 1920x1080", but something is seeing that the REAL resolution is 1280x720. Oh, and elsewhere in Speccy I found that the Y2P is reporting itself as a tablet rather than as a computer ... which probably isn't the issue here, but still unsettling.
So I changed the resolution to 3200x1800. Good news: I was able to get to the web app I need. BAD NEWS: The real resolution appears to be 1600x900:
I called Lnove tech support and got a representative who tells me that this is a Windows 8.1 problem; Windows 8.1 cannot support resolutions higher than 1920x1080, so even though the actual hardware resolution of the Y2P is 3200x1800, it needs to scale itself so Windows doesn't cry. This appears to be false (http://blogs.msdn.com/b/b8/archive/2012/03/21/scaling-to-different-screens.aspx), but I don't really know.
As such, my conclusion is that the representative told me something that was actually the opposite of correct, with correct SEEMING to be that the maximum REAL resolution of the Y2P hardware is in fact 1600x900, with Lenovo's claim of a 3200x1800 resolution being a software/upscaling/interpolation trick.
If that's so, it's really distressing, because it would appear to be a lie about hardware capabilities.
I didn't start out caring about that, although obviously as this point I feel like I've uncovered a smoking gun and would like an answer from Lenovo. But at the end of the day, since I don't need or want that 3200x1800 for the reasons I explained at the top of this post, I just want to know the truth—whatever it is— and to know how to get Windows to report the same resolution to "the world" that it's reporting to me, the user.
And I guess I wouldn't mind knowing why the scaling between real and interpolation is different depending on the settings one selects, too (do the math).
Anyone know anything conclusive? And even better, anyone from Lenovo have an ideas what the truth is here?

I don't know if any of these settings (resolution and/or item sizing) affects battery duration. But you could do a battery test: set it to one mode with full battery charge and then leave it on unused until the battery is 50%. Check how long that took. Repeat for the other mode and compare the time difference if any.
As to why there are these two layers of settings I think this is the answer: Windows metro apps and some Windows desktop application and the new elements in Windows 8 (the new start screen, the charms bar and all metro apps) have smart scaling of user interface elements (text, buttons and so on) designed to support very high resolution screens like ours. So buttons and text in such programs will adapt in size to fit the resolution. But older desktop applications, including the Windows 8.1 desktop taskbar and its icons it seems, does not do such smart scaling. So running them full resolution mean that everything is really tiny. To work around that everything can be scaled up to 200% (or 150% or 125%). I suspect that future versions of Windows or some Windows update may improve these things since the settings and the button descriptions in the settings aren't very user friendly.
But I'm not sure about this. I hope someone in the know jumps in this thread and gives more details.
It is a pity that Lenovo doesn't provide new Yoga 2 Pro users with a user friendly guide with information and tips on good ways to deal with resolutions and these scaling settings.

Screen Resolution in table control bdc

Hi ,
Im working on bdc table control using call transaction method for vk11 and mek1.While uploading data for vk11 for the first time it is taking all the records of the input file and if i do the same for the second time by changing the amount value it is taking only 24 records .(i.e if the input file contains only 24 records it wil update else if it has 25 records or more it not updating even single record and it is showing error " No batch input data for screen sapmv13A ..)...this issue is with the production server......................whereas in development and quality servers there is no problem....................
what migh be the problem and how to solve it?
can anyone plz help me on this

if its a problem in screen resolution then while recording through SHDB mark the check box default size
or
to make the bdc execute in standard screen size check the code below
data x_ctuparams type ctu_params.
x_ctuparams-defsize = 'X'. " This would freeze the resolution in any system
x_ctuparams-dismode = 'N'.
x_ctuparams-updmode = 'S'.
call transaction <TCODE> using it_bdcdata options from x_ctuparams.
So whatever is the screen size of the users front-end, the BDC will execute in standard screen size

How to create screen resolution in bdc table control

hi gurus
can anyone suggest me
how to create screen resolution in bdc table control
thanks&regards
mark.

Hi ,
Using CTU_PARAMS table for screen resolution .
For this sample code.
This is for Transation FB60.
report ZZFB60
       no standard page heading line-size 255.
tables t100.
PARAMETERS : p_file1 like rlgrap-filename,
             p_doctyp like RF05A-BUSCS,
             p_invdat like INVFO-BLDAT,
             p_posdat like INVFO-BUDAT.
CONSTANTS : C_TRANS_FB60(4) VALUE 'FB60'.
*Parameter string for runtime of CALL TRANSACTION
data : l_option type ctu_params,
       l_subrc type sysubrc.
DATA : l_mstring(150).
data      accnt type char17.
data       : day   type char2,
             month type char2,
             year type char4,
             date1 type char10,
             date2 type char10.
data      : cnt(2) TYPE n,
             cnt1 type i,
             fld(25) TYPE c.
data : begin of excel occurs 0,
        fieldname(255) type c,
       end of excel.
DATA:BEGIN OF it_mess OCCURS 0,
         msgtyp(5),
         lms(200),
          msgv1(50),
     END OF it_mess.
data: begin of t_record occurs 0,
         BUKRS(004),
        ACCNT(017),
        XBLNR(016),
        WRBTR1(016),
        WAERS(005),
        SECCO(004) ,
        SGTXT(050),
        HKONT(010),
        WRBTR2(017),
        MWSKZ(002),
        GSBER(004),
        KOSTL(010),
     end of t_record.
*Internal Table for Header Data
DATA : BEGIN OF t_head OCCURS 0,
        BUKRS(004),      "Company Code
        ACCNT(017),      "Account or Vendor
        XBLNR(016),      "Reference
        WRBTR1(017),     "Amount in document currency
        WAERS(005),      "Currency
        SECCO(004),      "Section Code
        SGTXT(050),      "Text
        END OF t_head.
*Internal table for Item Data
DATA : BEGIN OF t_item OCCURS 0,
        ACCNT(017),      "Account
        HKONT(010),     "GL Account
        WRBTR2(017),    "Line item Amount in document currency
        MWSKZ(002),     "Tax Code
        GSBER(004),     " Business Area
        KOSTL(010),     "Cost centre
        END OF t_item.
DATA: IT_BDCDATA      LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
      IT_BDC_MESSAGES LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
*include bdcrecx1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
PERFORM file_selection.
PERFORM data_upload.
PERFORM table_control.
start-of-selection.
l_option-defsize = 'X'.
l_option-dismode = 'A'.
l_option-updmode = 'S'.
day = p_invdat+6(2).
month = p_invdat+4(2).
year = p_invdat+0(4).
concatenate day month year into date1 SEPARATED BY '.'.
day = p_posdat+6(2).
month = p_posdat+4(2).
year = p_posdat+0(4).
concatenate day month year into date2 SEPARATED BY '.'.
*perform open_group.
loop at t_head.
CLEAR    IT_BDCDATA.
REFRESH IT_BDCDATA.
perform bdc_dynpro      using   'SAPLACHD'         '1000'.
perform bdc_field       using   'BDC_OKCODE'        '=ENTR'.
perform bdc_field       using   'BKPF-BUKRS'        t_head-bukrs.
perform bdc_dynpro      using   'SAPMF05A'          '1100'.
perform bdc_field       using   'BDC_OKCODE'        '/00'.
perform bdc_field       using   'RF05A-BUSCS'       p_doctyp.
perform bdc_field       using   'INVFO-ACCNT'       t_head-accnt.
perform bdc_field       using   'INVFO-BLDAT'       date1.
perform bdc_field       using   'INVFO-BUDAT'       date2.
perform bdc_field       using   'INVFO-XBLNR'       t_head-xblnr.
perform bdc_field       using   'INVFO-WRBTR'       t_head-wrbtr1.
perform bdc_field       using   'INVFO-WAERS'       t_head-waers.
perform bdc_field       using   'INVFO-SECCO'       t_head-secco.
perform bdc_field       using   'INVFO-SGTXT'       t_head-sgtxt.
cnt = 1.
cnt1 = 1.
loop at t_item where accnt = t_head-accnt.
*if cnt > 4.
*cnt = 4.
*endif.
if cnt1 gt 1.
CONCATENATE 'ACGL_ITEM-MARKSP(' cnt ')' INTO fld.
perform bdc_field      using   fld                   'X'.
perform bdc_dynpro      using 'SAPMF05A'          '1100'.
perform bdc_field       using 'BDC_OKCODE'        '=0005'.
endif.
perform bdc_dynpro      using 'SAPMF05A'          '1100'.
perform bdc_field       using   'BDC_OKCODE'        '/00'.
CONCATENATE 'ACGL_ITEM-HKONT(' cnt ')' INTO fld.
perform bdc_field       using fld                t_item-hkont.
CONCATENATE 'ACGL_ITEM-WRBTR(' cnt ')' INTO fld.
perform bdc_field using       fld                t_item-wrbtr2.
CONCATENATE 'ACGL_ITEM-MWSKZ(' cnt ')' INTO fld.
perform bdc_field       using fld                t_item-mwskz.
CONCATENATE 'ACGL_ITEM-GSBER(' cnt ')' INTO fld.
perform bdc_field       using fld                t_item-gsber.
CONCATENATE 'ACGL_ITEM-KOSTL(' cnt ')' INTO fld.
perform bdc_field       using fld                t_item-kostl.
perform bdc_field      using 'BDC_CURSOR' fld.
*CONCATENATE 'ACGL_ITEM-MARKSP(' cnt ')' INTO fld.
*perform bdc_field      using   fld                   'X'.
cnt1 = cnt1 + 1.
*cnt = cnt + 1.
*if cnt > 1.
*perform bdc_dynpro      using 'SAPMF05A'          '1100'.
*perform bdc_field       using 'BDC_OKCODE'        '=0005'.
**perform bdc_field       using 'BDC_OKCODE'        '=0006'.
*endif.
endloop.
perform bdc_dynpro      using 'SAPMF05A' '1100'.
perform bdc_field       using 'BDC_OKCODE'
                              '=BS'.
perform bdc_dynpro      using 'SAPMSSY0' '0120'.
perform bdc_field       using 'BDC_OKCODE'
                              '=BU'.
*perform bdc_transaction using 'FB60'.
CALL TRANSACTION C_TRANS_FB60 USING IT_BDCDATA options from l_option
                             MESSAGES INTO IT_BDC_MESSAGES.
perform error.
perform errordownload.
endloop.
*perform close_group.
*Form data_upload
FORM data_upload .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
   FILENAME              = p_file1
   FILETYPE              = 'DAT'
TABLES
    DATA_TAB             = t_record.
ENDFORM.                    " data_upload
*Form file_selection
FORM file_selection .
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      program_name = syst-cprog
      dynpro_number = syst-dynnr
      field_name    = 'p_file1'
    IMPORTING
      file_name     = p_file1.
ENDFORM.                    " file_selection
Form BDC_DYNPRO
FORM BDC_DYNPRO using program dynpro.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROGRAM.
IT_BDCDATA-DYNPRO = DYNPRO.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
endform.
*Form BDC_FIELD
FORM bdc_field using fnam fval.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDFORM.
Table Control
FORM table_control .
LOOP AT t_record.
    ON CHANGE OF t_record-accnt.
      MOVE-CORRESPONDING t_record TO t_head.
      APPEND t_head.
    ENDON.
loop at t_head.
         t_item-accnt   = t_head-accnt.
         t_item-hkont   = t_record-hkont.
         t_item-wrbtr2 = t_record-wrbtr2 .
         t_item-mwskz   = t_record-mwskz .
         t_item-gsber   = t_record-gsber .
         t_item-kostl   = t_record-kostl.
    APPEND t_item.
endloop.
     If t_record-level = 'H'.
         t_head-bukrs   = t_record-text1.
         t_head-accnt   = t_record-text2.
         t_head-xblnr   = t_record-text3.
         t_head-wrbtr1 = t_record-text4.
         t_head-waers   = t_record-text5.
         t_head-secco   = t_record-text6.
         t_head-sgtxt   = t_record-text7.
      APPEND t_head.
     else.
        t_item-accnt   = t_head-accnt.
        t_item-hkont   = t_record-text1.
        t_item-wrbtr2 = t_record-text2.
        t_item-mwskz   = t_record-text3.
        t_item-gsber   = t_record-text4.
        t_item-kostl   = t_record-text5.
     APPEND t_item.
     endif.
ENDLOOP.
ENDFORM.
FORM error .
LOOP AT IT_BDC_MESSAGES.
    IF IT_BDC_MESSAGES-msgtyp = 'E'.
   SELECT single * FROM t100 WHERE
                                sprsl = it_BDC_MESSAGES-msgspra
                                AND   arbgb = IT_BDC_MESSAGES-msgid
                                AND   msgnr = IT_BDC_MESSAGES-msgnr.
      IF sy-subrc = 0.
        l_mstring = t100-text.
        IF l_mstring CS '&1'.
          REPLACE '&1' WITH IT_BDC_MESSAGES-msgv1 INTO l_mstring.
          REPLACE '&2' WITH IT_BDC_MESSAGES-msgv2 INTO l_mstring.
          REPLACE '&3' WITH IT_BDC_MESSAGES-msgv3 INTO l_mstring.
          REPLACE '&4' WITH IT_BDC_MESSAGES-msgv4 INTO l_mstring.
        ELSE.
          REPLACE '&' WITH IT_BDC_MESSAGES-msgv1 INTO l_mstring.
          REPLACE '&' WITH IT_BDC_MESSAGES-msgv2 INTO l_mstring.
          REPLACE '&' WITH IT_BDC_MESSAGES-msgv3 INTO l_mstring.
          REPLACE '&' WITH IT_BDC_MESSAGES-msgv4 INTO l_mstring.
        ENDIF.
        CONDENSE l_mstring.
        it_mess-msgtyp = IT_BDC_MESSAGES-msgtyp.
        it_mess-lms = l_mstring.
        it_mess-msgv1 = IT_BDC_MESSAGES-msgv1.
        APPEND it_mess.
      ELSE.
        it_mess-msgtyp = IT_BDC_MESSAGES-msgtyp.
        it_mess-lms = l_mstring.
        it_mess-msgv1 = IT_BDC_MESSAGES-msgv1.
        APPEND it_mess.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDFORM.
form errordownload.
*down the internal table to excel file.
call function 'EXCEL_OLE_STANDARD_DAT'
           EXPORTING
                file_name                 = 'c:/Error.xls'
           TABLES
                data_tab                  = it_mess
                fieldnames                = excel
           EXCEPTIONS
                file_not_exist            = 1
                filename_expected         = 2
                communication_error       = 3
                ole_object_method_error   = 4
                ole_object_property_error = 5
                invalid_filename          = 6
                invalid_pivot_fields      = 7
                download_problem          = 8
                others                    = 9.
endform.
Reward if useful
Regards,
Narasimha
Edited by: narasimha marella on May 13, 2008 12:12 PM

T510 Screen resolutions error?

Similar Messages

Maybe you are looking for