T510i microphone mute button doesn't work with Win 7 x64bit Ultimate

Did anyone managed to make it work microphone mute button, with Win 7 x64bit Ultimate on t510i? On win 7 x32bit Proffesional it worked fine.
Any suggestions?
Solved!
Go to Solution.

Hotkey installed?
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014985
//JameZ
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD

Similar Messages

Microphone Mute Button Doesn't Work - T510

Pretty simple issue. I think I have the latest software updates installed but on my Win7 64-bit T510, all keyboard special buttons work except for Microphone mute. Speaker mute and speaker volume buttons work fine. I'm having to mute my mic from the Recording Devices screen in Win7.
What could prevent Microphone mute button from working?
Solved!
Go to Solution.

Markus101 wrote:
I've got the same problem on my new T410. I think quite a few people do, but for some reason, this isn't getting much attention. Strange how you can buy a high end product, from a reputable laptop manufacturer, and the product still doesn't work. Quite hard to believe - I mean, this is the year 2010, and a simple button on the notepad doesn't work. Also, hard to believe the audio is not supported on the display port....
Would be hard to believe that audio isn't supported on the display port, since it is supported..
Thinkpad T500-2081 CTO | T9400 2.53GHz | 8 GB RAM | ATI HD3650 + Intel GM45 | 15.4" LED WXGA+ | Windows 8 | ATI Catalyst 13.1 (non-switchable)
Thinkpad 390x | PII 333 | 256mb ram | NeoMagic 256AV | SVGA LCD | OS/2 v4.52

Upgraded to iOS7 on my iPad Mini and now the mute button doesn't work

I upgraded to iOS7 on my WiFi only iPad Mini and now the mute button doesn't work. It toggles between Ringer on and off and of course, there is no ringer on my WiFi iPad. Same thing happens in the control panel when I switch functions and try to mute the sound there. It used to toggle between Volume on and off. Anyone know how to fix this?

Try This...
Close All Open Apps... Sigh Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Mute button doesn't work to put phone in standby mode, help??

I have a blackberry curve and the mute button will not work to put my phone in standby. It does work to mute a phone call, however. It has done this a couple of times, where it will work for awhile, and then stop working for awhile. I'm not sure if I have hit something to make it so I can't put it in standby mode. Does anyone know how to fix this?

Welcome to the forums
Did you press and hold the mute button? It takes a long key press to work. Also do a Battery Pull:
1. Remove the battery while phone is turned on
2. Wait a few seconds before inserting it again
3. Allow the long boot up process to finish (takes a few minutes usually)
This clears most software issues that occur on blackberries from time to time. You could also use Quickpull, a free app that simulates a battery pull without physically removing the battery: http://store.berryreview.com/product.asp?id=27660&n=QuickPull-Free
A battery pull reclaims memory lost during application usage and clears minor software errors that creep in over time. The blackberry runs an OS just like your PC runs windows and the battery pull is the equivalent of a reboot/restart on your computer.
Kijana
Please remember to:
1. Mark Accept as Solution on the appropriate post once your issue has been resolved
2. Give Kudos to helpful posts (click the star next to the post)
Thanks

The sound mute button doesn't work on my HP pavilion dv6

The finger button on the pavilion dv6 doesn't work for the sound mute button. I'm not sure if a setting has been disabled or not. Anyone have any ideas on how to restore it ?

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp48501-49000/sp48668.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, restart the notebook and let Windows fully load. Open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if the mute button now functions correctly
Regards,
DP-K.
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

The Mute button doesn't work in the browser

I Have the mute button on most of the time cause i don't want to hear alerts, but noticed that in the browser if a webpage has any type of sound it plays it regardless of the status of the mute button. I know the mute button is overwritten by Music/Video but it shouldn't be with Safari.

App Producks wrote:
that sounds broken, sad no one replied you two years ago .
Actually is sounds as if it was working correctly. Mute only mutes notifications (phone rings, text, email, etc). What is less explicable is why you felt the need to resurrect this thread.

Table delete button doesn't work with Virtual Forms

I applied all of Winston Prakash's tips to my project table (http://blogs.sun.com/winston/category/Creator), but my table is not the only component in the page, so I had to use Virtual forms.
When I add the "Delete" button, i have to put it on a Virtual Form. I followed the steps on the multi selection table and the "Adding a button panel to the table component header" post, but when I select a row, the JavaScript works well (the row changes to yellow)... but the action code gets a :
getTableRowGroup1().getSelectedRowsCount()==0
and getTableRowGroup1().getSelectedRowKeys().length==0.
I tried almost everything with the forms... I don't know what I missed...

It works for me. Is it the Delete button in the Toolbar that doesn't work, or the Delete key in the keyboard, or what? Doesn't any other way of deleting a message work either (e.g. Edit > Delete)?

Home button doesn't work with AWKb and iPad2

I've paired an Apple Wireless Keyboard with my old iPad 2, running iOS 8.1.3. It seems OK, but the Ctrl-Opt-H doesn't work for the Home button. Thoughts?

Place the iPod in recovery mode using one of these programs and then restore via iTunes:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too

Mute Button Doesn't Work

My laptop has a mute button on the keyboard which does work in general. I just installed iTunes 7.1.1.5. When I am playing music and I hit the keyboard "mute" button, the computer mutes for a second and then unmutes - so the mute button (essentially) does nothing. This problem has only occured since I upgraded (I did not have this problem with previous versions) and does not occur when either iTunes is paused or iTunes is not open at all. Thank you,
Michael

My laptop has a mute button on the keyboard which
does work in general. I just installed iTunes
7.1.1.5. When I am playing music and I hit the
keyboard "mute" button, the computer mutes for a
second and then unmutes - so the mute button
(essentially) does nothing. This problem has only
occured since I upgraded (I did not have this problem
with previous versions) and does not occur when
either iTunes is paused or iTunes is not open at all.
This problem was introduced in iTunes 7.1 (or possibly reintroduced). It certainly did not affect 7.0. It only happens when iTunes is running and is NOT the front-most Application.
It really hacked me off when this happened because I normally leave iTunes running in the background while running Media Center 2005. iTunes can then share the library across my network and also automatically download podcasts.
The culprit is a DLL in the iTunes application and is in the following location…
C:\Program Files\iTunes\iTunesKeyboardCompatibility.dll
I initially tried iTunes 7.1.1 (did not fix it), then a couple of third party tools for remapping media keys which claimed to help (but did not), and finally bit the bullet and tried another tip which is to replace the above DLL file with a folder using EXACTLY the same name including the .dll extension. This does work and I can now use the Microsoft Media Center remote control to mute the volume etc. even with iTunes running in the background.

Email button doesn't work with Adobe Reader, only Acrobat

Hi,
I'm new to Adobe products and don't have much experience. Here's my problem.
I used LiveCycle Designer ES2 to create a fillable PDF form, with an email submit button. (uses mailto: to open users Outlook and attaches the pdf automatically)
The form is viewable by all, but the email button only works if opened with Acrobat.
Is there a way to have this work with Reader? We obviously don't have Acrobat licenses for every user.
Any support or assistance would be greatly appreciated.
Thanks

The problem is deeper than that. It's not reader. Now the same form I was creating in LifeCycle Designer ES2 yesterday, with the actions working perfectly, no longer work. None of the actions are working.
Could it be realted to me trying to set the default version compatibility to Adobe 7. It gave me warnings, so I set it back to 9.
Any help would be appreciated.

Torch Select Button Doesn't Work with Keyboard Out

Hi there, need some help.
Just recently (2 wks) the middle select button has quit working on my torch when I have the keyboard extended. I can still scroll around the screen with it, but when I push it to "select" it does nothing. The button works normally when I have the keyboard put away so this seems like a software problem or setting I have wrong but I can't figure it out. Any help would be appreciated as this is driving me crazy! Thanks.

Please try if a clean reboot will fix it. Remove the battery while the device is ON, replace it after a few seconds and let it reboot itself. Let us know if this resoves the issue.
Ron
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

Satellite A300-1GN - Media buttons don't work with Win 7

Hei
I installed windows 7 to my Toshiba satellite a300 1gn, Short Model No: psagce and some illuminated media buttons don't work.
i have the latest drivest but still nothing. first button is should controll the illumination for media buttons, touch pad and Satellite logo.
second button should open media player or something like that. the other fore buttons work fine!
Could someone helt me solve my problem?

Hi
You have to configure the single buttons.
This Toshiba button support pop up will appear if the pressed button was not configured.
So press the button and then assign the action, application.
You have to expand this menu pressing on the small arrow on the right.
Greets

Qosmio X500-1801 - FN button don't work with Win 7

I have to question why Toshiba Qosmio X500-1801 FN of buttons does not work on Windows 7 Professional 32-bit operating system. Please answer the [email protected]

If you didnt install right Toshiba tool it cannot work.
As far as I know Qosmio X500 is not supported so I dont know if you will be able to get them work on Win7 32bit.
What you can try is to install VAP designed for other notebook model but Im not 100% sure this will help.

Email submit button doesn't work with Thunderbird

I created a LiveCycle (v8.2.1) form with the email submit button. Works fine if the sender is using Outlook. If their using Thunderbird, it does not. I installed Thunderbird on my system (normally I use Outlook) and set Control Panel/Internet Options/Programs email to use Mozilla Thunderbird as the email program. When I click the Email button on my LiveCycle PDF form, I get a message telling me: Select an Email Client. The "Desktop Email Application" radio button is checked and that should be fine; the explanation for this button indicates that it should be checked "if you currently use an email application such as Microsoft Outlook Express, Microsoft Outlook, Eudora, or Mail.". I leave that checked, since I am using an email application and click OK. After 20-30 seconds, I get a message with the title bar: Microsoft Office Outlook "A program is trying to access e-mail address information stored in Outlook..." Allow|Deny|Help. I click Deny. After a minute or so, an Outlook "New" email window appears with the appropriate information from my LiveCycle PDF form. Right content, wrong email client. Since Thunderbird is my "default" email application, where is LiveCycle coming up with Outlook? What do my customers do who don't use Outlook?
I hope someone has a good solution.
Thanks.

When you click the submit button, do you get a window that has the title "Select Email Client"and has the options of "Desktop Email Application" and "Internet Email"? If not, does anything at all happen?
Note that Mac users must have Acrobat or Reader installed and be viewing the PDF in Acrobat or Reader for it to work. Many (most?) Mac users have the Preview Application as their default PDF viewer, and it does not support many interactive features such as form submissions. Although some third-party PDF viewers for Windows support form submissions, many do not.
For those that do not use PDF viewers that support form submissions, they will have to manually attach the document to an email message.

@[at]- Button doesn't work with the normal shortcut alt+L

A few days ago my MBP, MacOS 10.8.4 doesn't wrote the @ with the shortcut alt+L. I have to press ctrl+alt+L to write it.
Is there any Option to bring back the old shortcut alt+L? I have the same thing with the €-Button.
Thanks for helping me.
Cheerz

There is no menu button... so what is really happening?

T510i microphone mute button doesn't work with Win 7 x64bit Ultimate

Similar Messages

Maybe you are looking for