T5120 console login failed
Hi ,
Need help on this .
I have a T5120 unable to perform console login to domain through SP/ILOM .
I have try to reset SP but unsuccessful . Managed to reboot the SP with sunservice
id but still failed to get console login. The following error was seen while booting
up the SP
Waiting for daemons to initialize...
Timed out waiting for daemons to start
vbsc daemon failed to start
T5120 current FW is
current System Firmware
Sun System Firmware 7.1.6.j 2008/11/25 11:12
Host flash versions:
Hypervisor 1.6.7.a 2008/08/30 05:18
OBP 4.29.0.a 2008/09/15 12:01
POST 4.29.0.a 2008/09/15 12:27
SP firmware VBSC version: VBSC 1.6.7.c
What is the cause of daemons failure ?
Will upgrading the FW to the latest release ie patchid 136932-10 help ?
TIA
chong
Hi ,
More info .....
LDOM is not being configured on the server .
It seem that the ILOM has failed to communicate with the host as the result of the virtual blade system controller
daemon failure .
-> set /SYS/LOCATE value=Fast_Blink
set: Invalid target /SYS/LOCATE
How can I manaully restart the vbsc daemon ?
Similar Messages
-
Appl Server Admin Console: Login Failed
Hi,
I am forget my username and password when i installed J2EE appl server. I would like to reset them to new values in order to get in into the admin console. How can reset my login info? Can anyone help?
Thank you
LathaYou could try this:
http://java.sun.com/j2ee/1.4/docs/relnotes/troubleshooting.html#1026910
Or reinstall the appserver. -
BusinessObjects XI 3.0 - Central Management Console Login Fail
Post Author: iamhimhim
CA Forum: Deployment
Hello Everyone, I'm a beginner of BusinessObjects, I got a problem after I installed this software and try to login the CMC I got the following error message return, since I use default setting during setup, is anyone help me to found out the problems.
Error: Server DFFNPCBX:6400 not found or server may be down (FWM 01003) nullPost Author: RobertWl
CA Forum: Deployment
Hi iamhimhim, trying to connect, the cmc tries to establish a connection to the repo database. I guess, DFFNPCBX is the repo database server with a database listening to port 6400, right? Otherwise, you have to re-configure the repo database access. If this database access is confirgured properly, you have to ensure that-> you can access the server at all-> can pass the firewall (if applicable)-> the db middleware is installed properly.Hope this helps.Regards, Robert -
SCCM Console issue, SQL connectivity login failed for SCCM machine account
Hi ,
As part of resolving the corrupt SCCM 2012 R2 environment, we have uninstalled the site from the Standalone primary site and restored it from the last backup. The database is on remote server on SQL 2012 SP1. Only Site recovery is run.
Post the restoration on unable to launch the SCCM console, Error Could not connect to the site.
When I checked the logs in the log file SmsProv.log in the program filles\Microsoft Configuration manager\logs, the error is as below
*~*~e:\nts_sccm_release\sms\siteserver\sdk_provider\smsprov\sspobjectquery.cpp(6260) : SQL Connection attempt timed out~ SQL Error: [28000][18456][Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'XXXX\ABBC$'.~*~*
*~*~SQL Connection attempt timed out [28000][18456][Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'XXXX\ABBC$'.~*~*
<*><*> CANT CONNECT TO SQL, RETURNING ERROR <*><*>
Regards
LeelaDuplicate post.
https://social.technet.microsoft.com/Forums/en-US/6b26502b-ac07-426c-abe4-6cfdaa45b33b/sccm-console-launch-fails-sql-connectivity-issue-with-sccm-machine-account?forum=configmanagergeneral
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
Svc:/system/console-login:default failed repeatedly
I am in desperate need of help. I installed some patches from Sun Update Manager and rebooted as instructed. My system comes up but when I tried to login through the console, the login prompt keeps coming back, thus no users can log into the system. I even tried to ssh into the system and when I enter my username and password, I get a blank screen and cannot do anything.
I use a laptop to access the system through a hyperterminal serial port and when I navigate through directories as root, I cannot run ls commands or more on files. I do see an error message using the ls command:
ld.so.1:ls: fatal: libsec.so.1: version 'SUNW_1.2' not found (required by file /usr/bin/ls)
open failed: No such file or directory
Killed
When I use the svcs command, I see that the svc:/system/console-login:default is on maintainance. I disabled it and tried to enable it again, but the service stays offline. I tried all kinds of svcadm commands to get the service running, but nothing works.
I also tried killin the sulogin so that the sulogin service becomes disabled and enable system/console-login, but that didnt work either.
I tried using the svccfg steps, nadda. Can someone help? Thanks.who -r
run-level Sep 11 15:58 last=
uptime
11:01am up 98 days 20:02, 2 users, load average: 1.02, 1.02, 1.04
Actually all services are running like nis and nfs properly and all can login using ssh remotely, system is not rebooted that I am seeing this maintenance root password message,
when I killed sulogin process , then console-login seemed to go online but then again went to maintenance mode.. -
SCCM console launch fails , SQL connectivity issue with SCCM machine account
Hi ,
As part of resolving the corrupt SCCM 2012 R2 environment, we have uninstalled the site from the Standalone primary site and restored it from the last backup. The database is on remote server on SQL 2012 SP1. Only Site recovery is run.
Post the restoration on unable to launch the SCCM console, Error Could not connect to the site.
When I checked the logs in the log file SmsProv.log in the program filles\Microsoft Configuration manager\logs, the error is as below
*~*~e:\nts_sccm_release\sms\siteserver\sdk_provider\smsprov\sspobjectquery.cpp(6260) : SQL Connection attempt timed out~ SQL Error: [28000][18456][Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'XXXX\ABBC$'.~*~*
*~*~SQL Connection attempt timed out [28000][18456][Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'XXXX\ABBC$'.~*~*
<*><*> CANT CONNECT TO SQL, RETURNING ERROR <*><*>
Regards
LeelaHi Grath,
We ran a Site recovery, I checked the permissions on SQL server. Could not find the SCCM machine account in the SQL logins. Adding the SCCM machine account to the SQL logins solved the issue. As part of the recovery we only recovered the Site using the Site
backup. Have not touched the SQL server which is on a remote machine??
Anyways the login issue is resolved now.
Regards
Leela -
Essbase login failed & Cluster not available in Shared Services
Hi,
I have installed & configured the EPM 11.1.2.2 in compact deployment mode i.e. deployed to Embedded weblogic server. Shared Services, Essbase, Planning & Reporting are installed successfully.
I am able to login to Shared Services, Workspace & EAS console with my admin account. But I am unable to login to Essbase from EAS console, MAXL & ESSCMD.
When I am logging with MAXL or EAS console, I am getting login failed error.
Even EssbaseCluster-1 is not available under Application Groups in Shared Services. Only Reporting & Foundation are there.
Please help me what went wrong.
Thanks,
Naveen
Edited by: Naveen Suram on Nov 6, 2012 3:25 AMSharedServices_Security_Client.log
2012-11-06T14:40:41.071+05:30] [EPMCSS] [NOTIFICATION:16] [EPMCSS-20001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Successfully initialized EPM System Registry access. This is a status messages. No action required.
[2012-11-06T14:40:41.180+05:30] [EPMCSS] [NOTIFICATION:16] [EPMCSS-20002] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.EPMSystem] [SRC_METHOD: getInstance] Initializing Shared Services security instance using EPM System Registry. This is a status messages. No action required.
Essbase.log
[Tue Nov 06 14:40:25 2012]Local/ESSBASE0///776/Info(1051283)
Retrieving License Information Please Wait...
[Tue Nov 06 14:40:25 2012]Local/ESSBASE0///776/Info(1051286)
License information retrieved.
[Tue Nov 06 14:40:25 2012]Local/ESSBASE0///776/Info(1311019)
Classpath during JVM initialization: [;C:\Oracle\Middleware\EPMSystem11R1\common\jlib\11.1.2.0\epm_j2se.jar;C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseServer\java\essbase.jar;C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseServer\java\essbaseRegistry.jar]
[Tue Nov 06 14:40:52 2012]Local/ESSBASE0///776/Info(1051199)
Single Sign-On Initialization Succeeded !
[Tue Nov 06 14:40:52 2012]Local/ESSBASE0///776/Info(1056815)
Essbase 64-bit - Release 11.1.2 (ESB11.1.2.2.100B2166)
[Tue Nov 06 14:40:52 2012]Local/ESSBASE0///776/Info(1051232)
Using English_UnitedStates.Latin1@Binary as the Essbase Locale
[Tue Nov 06 14:40:54 2012]Local/ESSBASE0///776/Info(1056797)
Incremental security backup started by SYSTEM. The file created is [C:\Oracle\Middleware\user_projects\epmsystem1\EssbaseServer\essbaseserver1\bin\ESSBASETS_1352193054.BAK]
[Tue Nov 06 14:40:55 2012]Local/ESSBASE0///776/Info(1051134)
External Authentication Module: [Single Sign-On] enabled
[Tue Nov 06 14:40:55 2012]Local/ESSBASE0///776/Info(1051051)
Essbase Server - started
I am getting the following error in validation report:
Validating Essbase Server connection to NAVEEN
Error: Cannot connect to olap service. Cannot connect to Essbase Server. Error:Essbase Error(1051012): User native://DN=cn=911,ou=People,dc=css,dc=hyperion,dc=com?USER does not exist
Recommended Action: Check Essbase Server is started. -
All Im very new to Oracle DRM and Im trying to get the app setup on Windows server running SQL Server 2008. When I try to login to the Web Client I keep getting this error.
DRM-61026: Unable to create user session for the following reason: Login failed. Invalid user name or password.
Can you please helpThis might be due to The 'Oracle Instance' path may not have been set to a path relative to the 'CSS Bridge Host' (i.e. the Foundation Services machine) on the Configuration > Host Machines > CSS > General tab of the DRM Configuration Utility.
if this is the case then
1. Open the DRM Configuration Console.
2. Go to the Configuration > Host Machines > CSS > General tab of the DRM Configuration Utility.
3. Ensure that the path in 'Oracle Instance' has been set relative to the 'CSS Bridge Host' (i.e. the Foundation Services machine defined in 'CSS Bridge Host').
4. If corrections are made to 'Oracle Instance' then restart the DRM services to pick up the change.
Thanks,
~KKT~ -
Hi All,
When I start the MDM console and enter the MDM server name it takes. (Shows the green triangle-Running)
Then after clicking any of the repository (like Vendor), I enter the user name as Admin with no password. Then it throws the error
"Repository Login failed,please try again
Error: The server is no longer responding"
I have SQL server 2005 installed on my system. i have created an instance also in my database for MDM.
Please suggest.
Regards,
JitenderHi Jitendra,
You can try out various solutions:
1. You can restart your server.
2. After that repair your repository by verify-Repair option,say Load repository-with Update Indices Option.This will consider the changes made by repair option,n then load the repository.
3. If still, you are not able to load it, then you can try taking a back-up of your repository by Archiving it.
Un-archive the repository with a different name and check whether your problem has got resolved in the new copy of your repository. This can be used a test case.
4. Or you can see the log generated by clicking on the Logs table.
Hope it will help you.
Reward points if helpful.
Regards
Richa -
Data Integrator Web administrator & Login Failed in Profiler server login
Post Author: mohideen_km
CA Forum: Data Integration
Hi guys
Help me
Login Failed in Profiler server login
I Create Profiler Repository in Repository manager
While I login in BO DI Designer
I am getting an error
While login in Profiler Server Login
Connection to the Profiler Error is : server failed
close the application saving the login
Web administrator Problem
I have some doubts.Business objects Data Integrator.
error is : I can't View the Batch jobs history for the repository
Procedure I followed
In data Integrator Web administrator
--while logging as Admin
--In management Tree left frame of browser
--Click Status Interval -- Select > Show last Execution of job -- Click
apply --> Click Home
after Clicking home --- Click the repository ( I created direpo) i.e
Batch
After that I can't view anything any job name.......
Help me to figure it out
Mohideen
Prediktiva TechnologiesPost Author: bhofmans
CA Forum: Data Integration
Hi,
For the profiler problem : you need to add the profiler repository to the web admin too (you can do this in the tree Management/Repositories). Next you need a webadmin user that is linked to this repo, you could use the admin user for that, just check in Management/Users that for this user the profiler repo is attached.
Once this is set up in the management console, from within the designer, you can connect to the Profiling services using the web administrator's server name and port (e.g. localhost:28080) and the web admin user and password (e.g. admin/admin).
For your second problem : please check the connection to the repo (I assume you added the direpo already to the web admin) . Again in the tree Management/Repositories go to the local repository connection you created and check the connection (there is a test button). If the connection is correct, you will see the job history (empty if there are no job executions), in the configuration page you will see a list of all jobs and can execute or schedule a job.
Hope this helps... -
WL.login fails (Failed to load resource: net::ERR_CONTENT_DECODING_FAILED)
Live connect log-in stopped to work. We have two games online, Permia - Duels and Pet Shows. All platforms, Windows Phone, Windows 8 and web browser are affected.
It is easy to test with our web version of the game.
http://web.permiaduels.com
Step 1: Choose Live id login
Step 2: Give your live credentials
Step 3: You get error note, that live id login failed.
Step 4: Check from console logs and you can see error.
I debugged our Windows Phone version of the game, and same problem. Our Phone and Windows Phone versions cannot handle the WL.login exception and crashes.
Any knowledge why this is happening? The games has been online a while already without similar problems before.This is same problem that is reported in other post https://social.msdn.microsoft.com/Forums/windowsapps/en-US/32aa311e-a471-4e83-98ed-512e3f1ef98d/json-parse-error?forum=messengerconnect&prof=required
-
Hi Folks,
Anyone has face this issue before!!!
My GC was working very fine, When I am trying to login on GC console it's saying that login failed. I am able to login in the repository database with the same SYSMAN's password. But it's failing on GC console.. Any one has idea for the same? For what reason not able to login in the console, And one thing I have obeserved is timestamp of emoms.properties file.
Anyone has idea?Issue is resolved.
-
Repository login failed for user
Hello everyone,
I have some errors to log on the local repository. please see the attach file.
In fact, the repository looks like the common repository for the test.
So I adds the "full control" right to several USER GROUPs in this repostiory via CMC.
When the user log on this repo, he met the error "login failed for user, the user not active"
We use BODS 4.1.
Thanks for your help.
XinHello Friend,
In version 4.2 the ability to create access groups within the Central Repository was added.
To create such groups need access SAP Data Services Management Console:
http: //server/DataServices/launch/launch.do
Enter your login credentials. Such permission shall be provided through the Central Management Console (http://server/BOE/CMC), including the user in the group of Data Services Administrator User.
Once you have successfully logged on, click the Administrator button.
On the left side there are some options, espanda the Central Repositories option and if you have properly created the Central Repository it will appear in the list.
Click User and Groups note that by default comes a set created (digroup), select the User tab and click the option later add.
Then enter the information which user, group, status and description and apply the changes.
Made these procedures you can enable your central repository through the DS Designer and create new groups.
Hope this helps.
Hugs -
Can't access the console - Authentication failed
Hi,
I've just finished with DS and AM setup (consecutively).
The AM setup was done with Configure Now JES wizard, with Webserver, everything on the same machine - remote doesn't work. Everything fine.
When I try to access the console, I always get the message:
"Authentication failed.
Return to Login page"
I've tried admin, amldapuser, amadmin, amAdmin.
The logs in Directory Server says:
[01/Nov/2006:02:50:44 -0300] conn=137 op=10 msgId=489 - SRCH base="dc=caverna,dc=net" scope=2 filter="(uid=amadmin)" attrs="dn uid"
[01/Nov/2006:02:50:44 -0300] conn=137 op=10 msgId=489 - RESULT err=0 tag=101 entries=0 etime=0
amAuthentication.access:
"2006-11-01 02:47:25" "Login Success|module_instance|Application" Application AUTHENTICATION-105 dc=caverna,dc=net 31329a31876dc65001 INFO "cn=dsameuser,ou=DSAME Users,dc=caverna,dc=net" "Not Available" "cn=dsameuser,ou=DSAME Users,dc=caverna,dc=net" "Not Available"
and amAuthentication.error:
"2006-11-01 02:50:44" "Login Failed" LDAP AUTHENTICATION-200 dc=caverna,dc=net "Not Available" INFO "Not
Available" 192.168.254.1 "cn=dsameuser,ou=DSAME Users,dc=caverna,dc=net" beta.caverna.net
"2006-11-01 02:50:52" "Login Failed" LDAP AUTHENTICATION-200 dc=caverna,dc=net "Not Available" INFO "Not
Available" 192.168.254.1 "cn=dsameuser,ou=DSAME Users,dc=caverna,dc=net" beta.caverna.net
Any suggestions?
Best regards,
Luiz Felipe.I can't remember very well, but I think I reinstalled AM and DS, But I can't remember very well.
BTW, I'm gently answering your question suggesting this tip, but I've gave up about JES. So, don't trust me a lot ;)
Maybe I will try the 2006 version... maybe.
Message was edited by:
luizfox -
SSL VPN, "Login failed" and "WebVPN: error creating WebVPN session!"
Hi,
Just ran the wizard for Anyconnect SSL VPN, created a tunnel group, a vpn pool and added user to it. When trying to logon on the SSL service, it simply says "login failed". I suspect that the user might not be in correct groups or so?
some relevant config
webvpn
enable wan
svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1
svc enable
group-policy vpnpolicy1 internal
group-policy vpnpolicy1 attributes
vpn-tunnel-protocol svc
tunnel-group admins type remote-access
tunnel-group admins general-attributes
address-pool sslpool2
default-group-policy vpnpolicy1
username myuser password 1234567890 encrypted privilege 15
username myuser attributes
vpn-group-policy vpnpolicy1
Debug:
asa01# debug webvpn 255
INFO: debug webvpn enabled at level 255.
asa01# webvpn_allocate_auth_struct: net_handle = CD5734D0
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_login_resolve_tunnel_group: tgCookie = NULL
webvpn_login_resolve_tunnel_group: tunnel group name from default
webvpn_login_resolve_tunnel_group: TG_BUFFER = DefaultWEBVPNGroup
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
webvpn_portal.c:webvpn_login_aaa_not_resuming[3137]
webvpn_portal.c:http_webvpn_kill_cookie[790]
webvpn_auth.c:http_webvpn_pre_authentication[2321]
WebVPN: calling AAA with ewsContext (-867034168) and nh (-849922864)!
webvpn_add_auth_handle: auth_handle = 17
WebVPN: started user authentication...
webvpn_auth.c:webvpn_aaa_callback[5138]
WebVPN: AAA status = (ACCEPT)
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
webvpn_portal.c:webvpn_login_aaa_resuming[3093]
webvpn_auth.c:http_webvpn_post_authentication[1485]
WebVPN: user: (myuser) authenticated.
webvpn_auth.c:http_webvpn_auth_accept[2938]
webvpn_session.c:http_webvpn_create_session[184]
WebVPN: error creating WebVPN session!
webvpn_remove_auth_handle: auth_handle = 17
webvpn_free_auth_struct: net_handle = CD5734D0
webvpn_allocate_auth_struct: net_handle = CD5734D0
webvpn_free_auth_struct: net_handle = CD5734D0AnyConnect says:
"The secure gateway has rejected the agents VPN connect or reconnect request. A new connection requires re-authentication and must be started manually. Please contact your network administrator if this problem persists.
The following message was received from the secure gateway: Host or network is 0"
Other resources indicate that it's either the tunnel group, or the address pool.. The address pool is:
ip local pool sslpool2 172.16.20.0-172.16.20.254 mask 255.255.255.0
asa01# debug webvpn 255
INFO: debug webvpn enabled at level 255.
asa01# debug http 255
debug http enabled at level 255.
asa01# webvpn_allocate_auth_struct: net_handle = CE9C3208
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_login_resolve_tunnel_group: tgCookie = NULL
webvpn_login_resolve_tunnel_group: tunnel group name from default
webvpn_login_resolve_tunnel_group: TG_BUFFER = DefaultWEBVPNGroup
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
webvpn_portal.c:webvpn_login_aaa_not_resuming[3137]
webvpn_portal.c:http_webvpn_kill_cookie[790]
webvpn_auth.c:http_webvpn_pre_authentication[2321]
WebVPN: calling AAA with ewsContext (-845538720) and nh (-828624376)!
webvpn_add_auth_handle: auth_handle = 22
WebVPN: started user authentication...
webvpn_auth.c:webvpn_aaa_callback[5138]
WebVPN: AAA status = (ACCEPT)
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
webvpn_portal.c:webvpn_login_aaa_resuming[3093]
webvpn_auth.c:http_webvpn_post_authentication[1485]
WebVPN: user: (myuser) authenticated.
webvpn_auth.c:http_webvpn_auth_accept[2938]
HTTP: net_handle->standalone_client [0]
webvpn_session.c:http_webvpn_create_session[184]
webvpn_session.c:http_webvpn_find_session[159]
WebVPN session created!
webvpn_session.c:http_webvpn_find_session[159]
webvpn_remove_auth_handle: auth_handle = 22
webvpn_portal.c:ewaFormServe_webvpn_cookie[1805]
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE9C3208
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE9C3208
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE9C3208
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_allocate_auth_struct: net_handle = CE9C3208
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE9C3208
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE863DE8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE863DE8
webvpn_allocate_auth_struct: net_handle = CE863DE8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE863DE8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE863DE8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE863DE8
webvpn_allocate_auth_struct: net_handle = CE863DE8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE863DE8
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
HTTP: Periodic admin session check (idle-timeout = 1200, session-timeout = 0)
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_allocate_auth_struct: net_handle = CC894AA8
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
Close 1043041832
webvpn_free_auth_struct: net_handle = CC894AA8
Maybe you are looking for
-
I have just installed Photoshop Elements for a MAC. MY photos were in iPhoto, I have 47,000 pictures and my drive on my Mac laptop is not large enough. I store my photos in iPhoto on an external drive. Can I store all my photos on an external drive w
-
while browsing my pre when i first got it, i noticed the clock app where you can set alarms etc, however after updating to 1.3.1 (o2) there is only the date and time app, with no alarm options available, however if i choose list apps, then clock is i
-
HI, I have a doubt the bridge 1300 series, with connectors for external antennas,specifically the Cisco Aironet 1300 Series Outdoor Access Point/Bridge with RP-TNC Type Connectors AIR-BR1310G-X-K9-R, can be used both antennas, the internal antenna an
-
Command+0 is not changing the zoom level. Command+- and Command++ work normally. Command+0 does nothing. If I go to the View menu in the browser and select "Actual Size" or "Reset", the zoom works normally and reverts to the default. This occurs acro
-
Japanese language (unicode) handling
Hi, Architecture: JSP (presentation) + Java bean (business logic) We need to handle japanese language input, output and data storage in our web application. At present, we are able to output static string literals from JSP and get input from the user