T520 hotkeys stopped working on Win 8

I upated some apps like: PM, Bluetooth drivers and some more which had updates in 2013 (since I last upated in 2012) and hotkeys doesn't work. For example Fn+F5 just turns off wifi through windows 8. Fn+F8 doesn't work either.
Please help.

Hi, fischerb
Have you tried installing the latest version of the Hotkey Features Integration? If not, it can be found here.
Best of luck, and let me know how it goes
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Similar Messages

  • Hotkeys Stop Working (?)

    When using Framemaker v7.1 all hotkeys stop working randomly during use. This includes things such as ctrl-c, ctrl-v, ctrl-b, etc. The hotkeys continue to work in any other program outside of Framemaker.
    I've been trying to troubleshoot this for about 2 months now with no luck.
    The only fix I've discovered is closing down the entire program and reopening it.
    Anyone have any experience with this issue or any suggestions?
    Thanks!

    Craig:
    This is a FrameMaker behavior I've observed for several years.
    For me, the causative event is usually that of double-clicking on an imported-by-reference graphic so as to open it in a separate graphics-editing program. After doing so, CTRL keys stop working in FrameMaker.
    The circumventions I've discovered to this problem, in order of disruption to my workflow are:
    * Exit then restart FrameMaker (seldom works)
    * Log off Windows then log back in (almost always works)
    * Reboot (always works but seldom necessary)
    The mental construct I've developed to explain FrameMaker's behavior in this regard is that the program was originally created for a much earlier generation of Windows, and so represents one of several of FrameMaker's age-related "crotchets"...
    Cheers & hope this helps,
    Riley

  • Itunes has stop working for win 7 64 bits

    iTunes stops working has soon that start error I have win t 64 that was working fine until I install the latest version 10.5
    I try all the tricks that i know fix it delete and reinstall check for compatibility and everything fails...
    Please help
    Thanks vino

    I have the same issue!!  I can not find a way to sort it either!  I need help!

  • Satellite A205 - SD Card reader stopped working after Win 7 upgrade

    Satellite A205-SP5818
    I recently upgraded to Windows 7, and, among other things, the SD Card reader stopped working. I already downloaded and installed the driver offered in this site: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=2190493& rpn=PSAE3U&modelFilter=&selCategory=3&selFamily=10 73768663 (it's the next-to-last driver shown) but it went from not working all together to making funny noices when I insert the SD card... and then not working.
    Any ideas of other drivers that might work, or any kind of other solution?
    Thanks.

    Hi
    Try to remove eh SD card controller from the device list.
    Then reboot the unit.
    After that windows will ask you for an driver.
    You can download this driver:
    [SD Driver, Flash Memory v2.0.0.7|http://cdgenp01.csd.toshiba.com/content/support/downloads/driver_cardreader_ti_25844A.exe]
    You should unzip this package and has to point the driver files in this folder
    This should helps to get the SD card reader working again

  • W530 Hotkeys stop working with Firefox

    Hey Guys,
    I just received my w530 about a week ago and the laptop was pretty fast and everything was working well until I watched a youtube video on Firefox.  When I pressed play/pause on the interface my volume hotkeys on my keyboard wouldn't work.  It would start working again if I clicked on the volume icon.  So I figured I probably just needed an update.  I update the machine and I get even more errors with my machine saying something about some files lost and it was being fixed. 
    I fully update everything including the BIOS and I'm still gettng the same Firefox problem.  I don't really want to reformat or feel like I should have to reformat a new machine.  I do know that the problem is within FIrefox because I tested it on Chrome and IE and didn't get the same problems....Help anyone?

    Did Youtube decide to switch to HTML5 for you? That might be why.
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • Lenovo Fingerprint Software stopped working under Win 8.1

    Just upgraded to Win 8.1 (64-bit) and to the latest drivers for W700 (2753-WBB). 
    Major trouble with the Thinkvantage Fingerprint Software.
    The Lenovo Fingerprint Software version 3.3.2.50 for Win 7 (64-bit) was fine under Win 8.0
    but it doesn't work any more under Win 8.1
    http://support.lenovo.com/en_US/downloads/default.page?
    The Thinkvantage Fingerprint Software isn't compatible with W700 and W700ds.
    Thinkvantage Fingerprint Software Version 5.9.9.7282 for Windows 8 (64-bit) or 7 (64-bit)
    supports only the ThinkPad W510, W520, W701, W530 systems
    http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS029769
    Thinkvantage Fingerprint Software Version 6.0.0.8102 for Windows 8.1 (64-bit or 32-bit)
    supports only the ThinkPad W510, W520, W701, W530 systems
    http://support.lenovo.com/en_US/detail.page?DocID=DS036923
    The management of complex passwords becomes difficult without Fingerprint.
    Any ideas?? Thank you.

    Hi Katiedonut,
    I’m writing to just check in to see if the suggestions were helpful. If you need further help,
    please feel free to reply this post directly so we will be notified to follow it up.
    If you have any feedback on our support, please click here.
    Best Regards,
    Anna
    TechNet Community Support

  • HP Pavilion x360 touchscreen stops working with Win 8.1 pro

    I currently have a HP Pavilion x360 2in1 convertible laptop.  The model # is 11-n010dx.  My issue is the touchscreen was working just fine with Win 8 on it, however, I need to be able to connect to my work network and that requires Win 8.1 pro.  I did the upgrade to Win 8.1 pro 64-bit and the touchscreen is not even recognized by the OS.  It states "No pen or Touch input is available for this display."  I have installed all of the drivers, nothing is missing from the device manager.  I try to install SP57846 but get an error that states that my computer does not meet the minimum requirememnt for this update.  I just need drivers to run my touchscreen in Win 8.1 pro 64-bit.
    Thanks

    Hi @ThundarTheOrk ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion 11-n010dx x360 and the Touchscreen not working correctly after a Windows 8.1 update. Here is a link to a document on troubleshooting the Touchscreen.
    Here is a fix I found from Microsoft.
    The touchscreen shouldn’t need recalibration, but if you or another user has recalibrated it, it may affect the performance of the touchscreen.
    Here’s how to check or restore the factory default calibration using a keyboard or mouse:
    Press the Windows logo key Type Control Panel, then use the arrow keys to highlight Control Panel, and press Enter.
    In Control Panel, use the arrow keys to highlight Hardware and Sound and press Enter.
    Under Tablet PC Settings use the arrow keys to highlight Calibrate the screen for pen or touch input, and press Enter.
    Use the Tab key to select the Reset button, and press Enter.
    If the Reset button is grayed out, your Surface touch calibration is still at factory settings and nothing further required.
    Use the Tab key to select Yes, press Enter, and then follow the instructions on the screen.
    Hope this works for you.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Bridge cs6 stops working in win 7

    Bridge freezes and only way to make it work is to reboot the computer. and then it freezes again.
    I use win 7
    Any solutions?

    Try checking for permissions on these folders one by one:  C:\Users\Current_User\AppData\Roaming\Adobe\Adobe Illustrator CSx Settings
    AppData
    Roaming
    Adobe
    Adobe Illustrator CSx Settings
    Permissions on above folders should be R & W.
    If these settings are fine then check for permissions on these folders at location: C:\Program Files\Adobe\Adobe Illustrator CSx\Presets\
    Adobe Illustrator CSx
    Presets
    Permissions on above folders should atleast be 'Read' or 'Read & Write' both.
    This might help. Since, it works for you using different user account then it is definitely a user permissions issue.

  • My TB has stopped working. Win 8.1

    My OS is Win 8.1. My TB is 24.4.
    It worked fine yesterday 03-18-2014, but today it just runs and runs, no errors, no retrieval of email.
    I don't know what to look for or how to correct this extreme problem and have had to work with another email program that is not nearly as good as TB.
    I have not added (as far as I know) any other program. There have been no notices of invasions to my OS.
    I am not familiar with Win 8.1 protocols.

    Still waiting for some new ideas please or maybe some action on the developers as it seams it is a general problem. Thanks

  • TS1489 itunes has stopped working in win 7

    win 7 home premium on netbook fujitsu, had new hard drive installed
    by techs at Fujitsu, since then 10.7 Itunes.exe does get this error message
    whenever I try and play a podcast,
    most times it plays music but podcast does not,
    sometimes music as well,
    i uninstalled and reinstalled ituens,
    i changed compatibility to win 7
    and still gets that error message, that windows
    will try and come up with a solution?
    what to do now?

    just getting slow movement in the podcasts,
    but at least it plays the podcasts and doesn't shut down.
    Yeah, the workaround can sometimes degrade video performance, I'm afraid. Ultimately what's needed is a bug-fix update to iTunes to address this one. (The video content should be playing as it did with version 10.6.3.25.)
    One other workaround that might be worth a try is launching your iTunes in Safe Mode and then trying to play the podcasts.
    For instructions see the following document:
    iTunes: Troubleshooting issues with third-party iTunes plug-ins
    (I'd check video performance in iTunes Safe Mode both with and without the user tip workaround in place.)

  • Verizon 2.0 UA for Android stops working with Win 7

    Ever since the last software upgrade, my computer gives me an error whenever I attach my phone to it. The problem details:
    Problem signature:
      Problem Event Name:    APPCRASH
      Application Name:    SUA.exe
      Application Version:    1.0.0.1
      Application Timestamp:    5333848b
      Fault Module Name:    MSVCR90.dll
      Fault Module Version:    9.0.30729.6161
      Fault Module Timestamp:    4dace5b9
      Exception Code:    c0000005
      Exception Offset:    00056b1d
      OS Version:    6.1.7601.2.1.0.256.4
      Locale ID:    1033
      Additional Information 1:    0a9e
      Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:    0a9e
      Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
    I tried uninstalling and reinstalling the Upgrade Assistant, with the same results. This happens on both of my computers with Win 7, and with multiple phones. Has anyone seen this problem and/or know the resolution to it?

        Thank you for all of this information, pteeyore. We definitely want to figure out what is causing this problem. What is it that you are trying to do when you get this error? Have you reached out to Samsung for assistance? Since the program is supported by Samsung, I would recommend calling them at 888-987-4357.
    AndreaS_VZW
    Follow us on Twitter @VZWSupport

  • HP8600 Scan Network Folder stops working to Win XP Pro whenever Web Printing is enabled

    I have my HP Officejet Pro 8600 N911g configured to allow scan to Network Folder with shares on two of my home computers. One runs Win 7 Professional (64b), the other runs Win XP Professional. On the printer's Embedded Web Server, I confirmed that Scan to Network Folder was operational for both systems using the "Scan" tab's "Network Folder Setup " links named "Test" for each device.
    Then I enabled Web Printing from the 8600 front panel and returned to the Embedded Web Server to repeat the Network Folder Setup Tests. The test with Win 7 Pro passed, but the test with Win XP failed.
    I then went back to the printer and disabled Web Printing, then returned to the Embedded Web Server for a third round of tests. This time both Win 7 and Win XP passed the Network Folder Setup tests, as they did before I enabled Web Printing.
    Is this an expected behavior? If so, is the restriction when using Web Printing due to one system running XP Pro or to my having Scan to Network folders set up for two systems?
    Thanks
    Dave

    Hi Dennis,
    Based on your description, I understand that you configure redirected folder via Group Policy. If anything
    I misunderstand, please don’t hesitate to let me know.
    Please logon the problematic computer by using that user who was redirected My Documents folder, then run
    gpupdate /force command and monitor the result.
    à
    Is there a registry change I can make to redirect the path from the local C' to the UNC path?
    Please type
    regedit in Run to open Registry Editor and follow the path:
    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders\Personal
    HKEY_CURRENT_USER \Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders\Personal
    Please check if Value data was set to correct path.
    If any update, please feel free to let me know.
    Hope this helps.
    Best regards,
    Justin Gu

  • W520 Hotkey stopped working for no apparent reason.

    Hello Lenovo Community,
    I have been attempting to fix my hot keys. I have read several solutions and have attempted it. I have unistalled the hotkeys drivers and reinstalled it and updated my drivers. Still I have no luck. Hopefully someone can help me out.
    Thank You

    Did you try uninstalling and reinstalling the Power Management driver?
    Are you on Windows 7?
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • Itunes 10.5.3 has stopped working  on win 7 64 bit opens up fine but when i transfer songs over to playlist get the error

    Problem signature:
    Problem Event Name: BEX
    Application Name: iTunes.exe
    Application Version: 10.5.3.3
    Application Timestamp: 4f14cc3d
    Fault Module Name: StackHash_fc1b
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 00000000
    Exception Offset: 9bc61cd4
    Exception Code: c0000005
    Exception Data: 00000008
    OS Version: 6.1.7601.2.1.0.768.3
    Locale ID: 4105
    Additional Information 1: fc1b
    Additional Information 2: fc1b9e6b19dc26e21531e91fc928f20e
    Additional Information 3: 3d4e
    Additional Information 4: 3d4eea0a04396db43efec758c2149f2d
    Read our privacy statement online:

    Try gn_id's suggestion from the following post:
    Re: iTunes 11 crashes when opening the store - no error message

  • PowerShell ISE has stopped working on Win 8.1

    I have Windows 8.1 with all updates.
    I could launch powershell.exe but not the ISE. I could execute some of the powershell 2.0 codes but definitely not 3.0 or 4.0 codes. 
    Tried launching ISE with -noprofil, same error. Tried installing/uninstalling Powershell 5.0 May 2014 preview, no luck.
    Faulting application name: PowerShell_ISE.exe, version: 6.3.9600.16384, time stamp: 0x5215ce45
    Faulting module name: ntdll.dll, version: 6.3.9600.17031, time stamp: 0x530895af
    Exception code: 0xc0000374
    Fault offset: 0x00000000000f8c9c
    Faulting process id: 0x15cc
    Faulting application start time: 0x01cf80201ad59f4f
    Faulting application path: C:\Windows\system32\WindowsPowerShell\v1.0\PowerShell_ISE.exe
    Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
    Report Id: 595de91a-ec13-11e3-8264-1803733008d1
    Faulting package full name: 
    Faulting package-relative application ID: 

    Hi Katiedonut,
    I’m writing to just check in to see if the suggestions were helpful. If you need further help,
    please feel free to reply this post directly so we will be notified to follow it up.
    If you have any feedback on our support, please click here.
    Best Regards,
    Anna
    TechNet Community Support

Maybe you are looking for

  • Why can't I get an external HDMI display after upgrading to Maverick?

    I've been hunting all over for an answer to this problem.  I upgraded to Maverick in the fall and recently discovered that I can no longer get a picture on an external TV via Thuderbolt + HDMI.  I've used new connectors and cords.  Apparently others

  • Problem installing Pse5 on Windows 7

    Can anybody help me make Editor work on Pse5 when installed on Windows 7. All of the functions appear to behave correctly when I run Organiser. As soon as I start Editor, the application crashes. I have carried out a Recover and have Reindexed all of

  • Remove header by XSLT Mapping

    Hello Experts, I have an incoming XML coming through HTTP protocol which consiste of Header and the data is like below. <?xml version="1.0" encoding="utf-8"?> <soapenv:Envelope xsi:schemaLocation="http://schemas.xmlsoap.org/soap/envelope/ <?xml versi

  • Screen won't rotate despite doing 2x factory restores

    I've seen a few folks had this prob. The screen no longer rotates when I turn the iPod (e.g. when viewing photos, web pages etc). I tried the factory restore as suggested in other threads, but mine is still not working. Is there anything else I can t

  • Reading flat files with variable names in SSIS

    I have a ssis package that reads a flat file from a network drive (using a flat file connection manager) and loads the data into sql server tables. I have this working on a fixed file name, however in reality the file name will not be the same from r