T520 with dual monitors won't save resolution settings

I have a new T520 docked with a 4338 docking station. I've connected 2 Lenovo L1940p LCD's to the dock using the 2 DVI ports. In order to set the 2 LCD's to 1440 x 900 (their max resolution), I have to disconnect the 2 DVI cables from the dock and boot the T520. Once the T520 is up, I reconnect the 2 LCD's and they work fine. If I leave them connected during the bootup, I am not able to set them to 1440 x 900. The max it will go at that point is 1366 x 768. Even if I boot the laptop before docking and then dock it after it's up, I lose my max resolution until I reboot without the LCD's connected. I have the NVIDIA NVS 4200m and the driver is up to date (according to Windows). I am running Win7 Enterprise. I also tried changing to discrete graphics in the BIOS with no luck.
Can anyone help with how to save this configuration so I don't have to go through this everyday? Much Appreciated!!

At this point I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, boot holding down CMD+s, then when the prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
Though it might just be that you need to use Disk Utility to Fix Permissions, but I'd do the Applejack thing with any messed install.

Similar Messages

Interfacing with dual-monitor machine

Hello all--
I've got a G5 at home with dual monitors on which I run 3D animation software with lots of panels. I'd like to be able to control the G5 from work using a laptop (possibly also connected to an external monitor). Is it possible to display both screens of the desktop using ARDv3 on the laptop? Some users have mentioned they can do this but the size of the remote screens is unsatisfactory. So, again, can you visualize both screens well via the remote computer?
Thanks for any help you can offer.

you can view both screens at once but it will be scaled to fit on the screen you have... so what you see is dependent on the resolution of both client monitors and your admin computer's monitor.
you can also select to view a single monitor of the client computer.
i've never run ARD admin on a computer with 2 monitors so i'm not sure how it handles it but i'm guessing that you can view both monitors on both admin monitors.... it'll probably scale down or up dependent on resolution.

Dual monitors blinking ; cannot change resolutions??

one of the features of Yosemite was supposed to be its multi monitor support.
well with dual monitors from a 2012 mac mini-i get blinking all the time;
AND under system preferences i cannot alter my monitor resolutions???
this feature was removed??
thanks

Thanks,
But I already set up my xorg.conf for that, and used those commands. It didn't work. My xorg.conf right now, though, doesn't have the changes I made because I reinstalled Arch (reinstalled because I started using Kubuntu and decided I preferred Arch).
See my orginal Xorg.conf: http://pastebin.com/ff386ad2

Run screensaver independently with dual monitors

I was wondering whether, when running OS X with dual monitors, it was possible to run the screensaver on one of the monitors (while still using the other)?
Cheers,
Diego

Nope. Can't do it.

Gnome Crashes on Login after messing with dual monitor settings

Gnome displays the sad monitor and has the error message "..something has gone wrong..~" and will force me to log out. I've only started to experience this after messing with dual monitor settings in nvidia. The dual setup(twinview) worked but once I rebooted, I couldn't get it going for awhile.
Here's my xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 285.05.09 ([email protected]) Fri Sep 23 19:18:19 PDT 2011
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
#Option "TwinView" "True"
#Option "MetaModes" "nvidia-auto-select, nvidia-auto-select"
SubSection "Display"
Depth 24
EndSubSection
EndSection
I commented out below to get it in again, but it still feels shaky and unstable to log in now. Sometimes I will get the error and after a log out and login, it'll work.
#Option "TwinView" "True"
#Option "MetaModes" "nvidia-auto-select, nvidia-auto-select"
Extra Notes: I have another desktop session with awesome installed(uninstalled now) and could log into that no problem. Awesome was giving me troubles so I uninstalled it. I have 2 gnome desktop sessions, my regular gnome session(the one that crashes), and the other with no window manager(never crashed on startup).
I installed awesome around the same time as configuring the dual monitor setup.
Thanks.

Update.
The crashes are to be expected now. I'm circumventing the whole thing by logging into my other Gnome session without a window manager, logging out and then logging back into my regular Gnome with Metacity.
I've noticed the tty1 sessions(not sure what's it's called) is strange. Apparently my session runs on tty8 but when I try logging in, it'll crash me and tty7 gives me a blank screen with a blinking underscore. The other tty1s work regularly. Not sure if this has anything to do with it.
Is there a way to just reset the Gnome settings?

Need to launch Organizer Twice to work with Dual Monitors

If I open a project or either Photoshop Elements 10 or PRE10 and then click on Organizer it loads, but sits in the taskbar below. If I hover over it the AERO Windows (Win 7) pops up showing it's loaded. But It will not maximize. This is when I had last used it on a second monitor so I can easily compare before and afters. However, if I right click on it and close it, then reopen it, it launches perfectly in the 2nd monitor. Does this every time. I ussually leave it open all the time now to avoid this but I don't know how sesitive the catalogs are if the system is rebooted for some reason.
I did no specific configuration for dual monitors, Just dragged it over there when I wanted to use it.
Thanks,
Joe..

Hi Joe,
This is a known issue with dual monitors and got to know that Organizer people are tracking it as a bug for now.
Hope this will be fixed soon.
Thanks
andaleeb

[SOLVED] openbox margins with dual monitors

Hi community,
I have stumbled to a nasty problem on my first incursion to dual monitors in openbox.
I'm using xrandr with this command (which works just fine BTW):
xrandr --output LVDS --mode 1280x800 --primary --output VGA-0 --mode 1280x1024_60.00 --gamma 1.0:1.4:0.85 --right-of LVDS
and have set a Virtual screen in xorg.conf of 2560 x 1024 pixels.
But, my laptop monitor only handles 1280x800, while my external LCD monitor has 1280x1024, so there is a virtual area under my laptop screen which i'm not using, but i dont really care about that.
The problem is that when I'm setting screen margins, so that maximized windows will respect the panels in the bottom (tint2), in rc.xml (or by obconf) the margins are applied to the virtual screen and only are practical on the external monitor wich has more pixel height.
I'm really missing some kind of per monitor margin settings in openbox, maybe there is and i haven't found it? It makes me wonder because openbox can maximize windows to a single monitor, even if the whole layout it's treated like a virtual screen, so it has some way of distinguishing between them.
I would appreciate any suggestions, thanks.
Last edited by andreamer (2010-07-26 18:32:15)

TL;DR - I'm not aware of any acceptable solution at the moment.
Basically, what you're having problems with, is the "dead area." It can really be quite a pain in the butt if window managers or other screen aware applications don't anticipate it properly. To my knowledge, Openbox doesn't support margins on a monitor-by-monitor basis. In reality, you shouldn't need to be setting margins anyway. Tint2 should be reporting itself as a taskbar, and Openbox should be respecting that.
I have dead area too, with multiple monitors, and Openbox respects both of the KDE taskbars I have running (one on each monitor). (I use KDE and simply replaced Kwin with Openbox.) This tells me that tint2 should be able to cooperate with Openbox. I remember trying tint2 a while ago, and didn't fine it adequate in a dual monitor environment (it was probably a year ago or so). tint2 would need to be setting the _NET_WM_STRUT_PARTIAL hint, and I'm not sure if it is (or if it's doing it properly). See http://standards.freedesktop.org/wm-spe … #id2507618
Also, I do know that the developer for Openbox recently got a dual monitor setup, and she's been adding additional support for dual monitors a little at a time. Hopefully with 3.5, there will be a lot more support. (Margin support for multiple monitors would be great, because it could be a good utility knife for applications that don't care about multi-monitors setups and don't set the proper hints.)
If you're capable of modifying tint2, my course of action would be to try something that works (like the KDE taskbars) and record the hints being set there. Then compare them with tint2 and try to mirror KDE's setup. (If you're a programming lacking experience with X and related nonsense, I'd be more than willing to offer what guidance I have.)
Also, I developed a panel myself (and got pretty far along) using the PyGTK toolkit... But I can't remember if I solved this problem or not. I'll try to check it out and get back to you. (I got as far as implementing a widget system that includes a task list, system tray, clock, menus... It just isn't polished very well. My original intention was for it to be a more robust PyPanel with dual monitor support.)
Last edited by BurntSushi (2010-07-24 22:46:23)

Unwanted keyboard shortcut with dual monitors

Problem:
I have a computer setup with dual monitors (desktop extended). When I have a window open, e.g., Microsoft Word 2007, after I type "1" on the keyboard, the Word Window and mouse relocate to the second monitor. When I type "2" the Word window and mouse relocate
to the main monitor. In the word document, 1 and 2 are typed in the document, but pushing the keys still move the window and mouse to the opposing monitor.
I checked the keyboard settings within Windows and found that sticky keys and such are not enabled. The keyboard has no such features to enable. I also checked the display setup in display properties and found nothing that would indicate such a setup. Google
searches return nothing related to my problem.
What I do know:
-The rest of the numbers on the keyboard work fine. Pressing 1 and 2 on the number pad at the far right of the keyboard do not transfer the active window to the second monitor. Those keys work fine.
-The type of window does not matter. Using notepad, word, excel, internet explorer, sticky notes; all of those windows would transfer to the opposing monitor when I push 1 and 2.
Setup:
Windows XP
Dual-Monitor
Wireless Keyboard and mouse

This pertains to StarTech DVI to USB adapters.
There's an icon in your system tray near the clock, either super utility or usb display device. Right click, and select multi display control panel.
10:20:14 AM
There's a button to disable as long as you have the newer driver from their website. The old drivers had a bug that caused this button to not work

Visualise Spots with dual monitors

I'm finding some eratic behaviour when using Visualise Spots with dual monitors.
I have Development open on one window and the Loupe view open on the other. When I click on the Visualise Spots both windows show the visualisation. When I click the button off - both windows switch to normal view - most of the time.
Occasionally it will switch off in the Development view but stay on the Loupe view on the second monitor. It only goes away when I switch to another image.
Is anyone else seeing this behaviour?
Roy

I have found that's it's linked to zoom level.
I can't quite make out what's going on but the behaviour is very strange.
Roy

IChat screensharing won't fully connect with dual-monitor setup

I've read through several threads but none seem to match the peculiar problem I am having.
My mum just got a new "13 MacBook Air and an external LG LED (E2240T) monitor. I ran software update on it so her system is current, as is mine (late 2009 MBP/24" ACD).
Screensharing works fine when her external monitor is not connected but when it is plugged in and we try to screenshare the audio connection is established but sharing won't fully load and stops with this:
We tried unplugging the monitor and then plugging it in once the screensharing connection was established and that ended up with the image on my end freezing.
Anybody else have a similar problem? Any suggestions?
For what it's worth with her old (2006) MBP and old LG LCD we had no problems.

Hi,
I have an old 17" Studio Display (The one with the ADC connector) and a 19" CRT Screen that I have On sometimes with my G4/1Ghz Dual Processor.
This is running Snow Leopard.
If I share Screens using iChat with my MacBook Pro, the MacBook Pro puts the Screens Side by side as one picture (You cannot view just one screen).
iChat has a Software "Camera" that deals with the "Desktop" or what ever is on it as the pic for the Screen Sharing feed.
I have tried several Resolution settings on the CRT and iChat seems to cope (They are in a fairly narrow band though).
It might be possible that iChat is having difficulty if the two screens are vastly different in Size or resolution settings.
You seem to be describing using a 13" screen and the 21'5" one which may explain it.
There may also be differences in the Ratio.
3:48 PM Sunday; January 30, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

[SOLVED] Help with dual monitors (second monitor won't wake up)

Hi. I'm trying to set up dual monitors, but I can't seem to get it to work.
I've got an ASUS P8H67-M EVO motherboard, and I'm using the xf86-video-intel driver. I'm using one VGA and one HDMI.
xrandr gives this
xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 32767 x 32767
VGA1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 474mm x 296mm
1680x1050 60.0*+ 74.9
1600x1000 60.0
1280x1024 75.0 72.0 60.0
1440x900 75.0 59.9
1152x864 75.0
1024x768 75.1 70.1 60.0
800x600 72.2 75.0 60.3
640x480 72.8 75.0 66.7 60.0
720x400 70.1
HDMI1 disconnected (normal left inverted right x axis y axis)
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
HDMI3 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 531mm x 299mm
1920x1080 60.0*+ 50.0 60.0
1920x1080i 50.0 60.1
1680x1050 59.9
1600x900 60.0
1280x1024 75.0 60.0
1280x960 60.0
1152x864 75.0
1280x720 50.0 60.0
1152x720 60.0
1440x576i 50.1
1024x768 75.1 60.0
1440x480i 60.1
832x624 74.6
800x600 75.0 60.3
720x576 50.0
720x480 59.9
640x480 75.0 60.0 59.9
720x400 70.1
DP2 disconnected (normal left inverted right x axis y axis)
DP3 disconnected (normal left inverted right x axis y axis)
So it looks to me like both displays are being detected. The geometry looks such that one display is on top of the other, but I can change that using an xorg.conf.d config file (e.g. https://wiki.archlinux.org/index.php/Mu … xorg.conf). I also tried using arandr.
The real problem is that the display on HDMI3 just isn't "waking up". The power is on, but it just sits there in sleep mode.
Any help would be great. I might just be missing something simple. Thanks.
Edit: I just saw a short list of window managers near the bottom of the Arch Multihead page (https://wiki.archlinux.org/index.php/Mu … _xorg.conf). I don't see openbox on that list. Does that mean I'm SOL if I want to use openbox with multiple monitors? This page seems to imply that it should work fine with openbox http://magnatecha.com/dual-monitors-wit … nd-xrandr/.
Last edited by Pacopag (2013-08-19 18:58:36)

I use XFCE, and when I boot my computer I just run:
xrandr --output DVI-I-1 --auto --output DVI-I-2 --auto --left-of DVI-I-1
I'm assuming if you modify the names appropriately that it'll work too. I have had issues before trying to run dual monitors without taking both outputs off of a single video card (which is what I'm doing now). For example, I had a graphics card with one (VGA) output and a VGA output on my motherboard. But, connecting the graphics card disabled the on-board VGA. So it is possible (I'm not an expert here) that two displays coming off the motherboard may not work for hardware reasons.

Screen Sharing problem with dual monitors in 10.6

When I'm using Screen Sharing from my Macbook to my iMac with dual displays (10.6.1 on both machines) It works fine when I initially connect, but when I switch to Display 1, it shows me Display 1, but though my cursor moves, I can't click on anything. It won't let me go back to viewing both displays either, and changing from Adaptive to Full Quality or vice-versa makes no difference, as does Scaling. This happens whether I'm on my local network or using Back-to-my-Mac. It was working fine under Leopard, but has been exhibiting this behavior since the 10.6 upgrade.
Mark

This is a very irritating bug. One thing that has worked for me a couple of times (I think a couple of times it also didn't work) is to turn on mirroring. Screen sharing then only shows one monitor, since they are both the same. I'm not sure if the monitors have to have the same resolution for this to work, mine do. The nice thing about this is that before quitting the screen sharing app you can just turn mirroring off again and it will go back to normal. It's easiest to do this by enabling the 'show displays in menu bar' in your displays preferences.

Mac and Windows with dual monitors Question

I use a Intel MacPro running Tiger with latest updates in my church. We use the Mac and Keynote 2.0.2 to present PowerPoint slides on the big screen (dual outputs). Everything was going well until the pastors upgraded to new computers running Vista and Office 2007. Now neither pastor's files will load into Keynote. It comes up with an error. The pastors have saved their files from PP as 2003 PPT files, and they still will not open. Error - unable to open file type. The one pastor went back to XP (dumped Vista) but still used the Office 2007 program and saved as PP2003, but the error still appears.
FYI - I noticed that Office 2007 saves with a file with the extension of .pptx instead of the .ppt. Checking the file they gave me shows that it is indead a .ppt file and not .pptx file. It makes no difference.
I believe it is an Office 2007 problem I'm dealing with. I have taken the .ppt file and loaded it onto the PC running PP 2003 and it loads fine, except for some format problems. I then resave it with a different name and tried to load that file (hoping it was converted) , with the same error showing. The problem is transfered with the file. Other files created with the PP 2003 program load fine into Keynote, so it has to be the Office2007 doing something.
So the questions are, is there an easy fix and still use the Keynote program, OR does Keynote 3 take care of this problem in the upgrade, OR should I install Win XP home or Pro and use parallels (which I have)? Would WinXP Home be enough to support the dual outputs and be fast enough? I am familiar with XP Pro not Home.
Any information you may have, could be a help. I need this resolved soon. I hate having to bring in the old Windows PC, after enjoying the quality of the Mac.

David.Austin.Allen wrote:
You should not have issues attaching two displays to the Mac mini. You will not be able to use an iPad as one of those displays.
I have no issues streaming video on demand from all of the media sources which you have listed. My Mac mini is the Early '09, so my hardware is not as powerful as the newest Mac mini.
Dah•veed
Thanks David - glad to here the Mini supports dual monitors, and you're not having any streaming issues. Did you have any special settings, like "no hardware acceleration"? Are you streaming HD content?
If it supports dual monitors, then I would think the iPad could be used as a second display and input device - the demos I've seen with Air Display (from Avatron Software") would accomplish what I'm looking for. Here is a demo at http://www.vimeo.com/16950420 showing the iPad working with a Windows machine, but I've seen them working with Macs as well.
Thanks again
Michael

ARD and controlling box with dual monitors!

My workstation at home has dual monitors,
when I connect to it with ARD both monitors are displayed, which means the window looks very wide, small and funny.
You can hardly see anything either.
(they are both highres)
I only need to see one monitor when I connect with ARD. Is there anyway I can get that working?

You can set ARD to view all screens at once or at real screen resolution. Click the 'Fit Screen in Window' icon (looks like an X with arrow points and a diamond in the middle).
I have had some issues with my Multi-screen machines colors displaying oddly while in 'Fit Screen in Window' mode, but turning it off fixes the issue and lets you auto scroll around like virtual Desktop.
Hope that helps.

Workspace with Dual Monitors in Bridge

I'm operating with two monitors. On my main monitor I have the Preview Panel open at full screen size. On my secondary monitor I have the content panel open with thumbnails showing. I've tried several times to save this as a single workspace but to no avail. Saving the main monitor workspace is fine. But I then need to save the second monitor workspace as a separate workspace.
In doing so the second monitor workspace (thumbnails) jumps back to the first monitor & emulates what the main monitor shows. I'd like to be able to save dual monitor workspaces as unique workspaces. Hope this makes sense.
Kevin

Kevin,
 
 You don't mention what versions of Bridge and the OS you're running.
 
 I have the Preview panel on my main monitor and everything else on the second monitor. This works for me in CS4 and in CS3 or CS2. No problem saving that as my default space. I'm running Tiger 10.4.11.
 
 c
<a href="http://www.pixentral.com/show.php?picture=1OMtcYV1y6TWyTkNz7E64iH2cuIV5" /></a>
<img alt="Picture hosted by Pixentral" src="http://www.pixentral.com/hosted/1OMtcYV1y6TWyTkNz7E64iH2cuIV5_thumb.jpg" border="0" />
 
 Start fresh, and this time do not attempt to move the
pods around, rather move the
panels. Bridge doesn't like it when you move the pods themselves.
 
 
<a target="new" href="http://www.adobeforums.com/cgi-bin/webx?14@@.3bba3d51">


Adobe Bridge Macintosh forum [CLICK HERE]


</a>
 
 
<a target="new" href="http://www.adobeforums.com/cgi-bin/webx?13@@.3bb6a869">


Adobe Camera Raw Forum [CLICK HERE]


</a>

T520 with dual monitors won't save resolution settings

Similar Messages

Maybe you are looking for