T530 multiple display configuration

I have the T530 with the NVIDIA Optimus option that should allow a triple display configuration (two external displays and the laptop LCD).
I have been able to get a working configuration with the laptop LCD and two external displays over DisplayPort through the docking station.
I have found that upon some boot cycles, I am either stuck with just the laptop LCD as the only display or I am able to turn on only one external display. Sometimes a reboot will change it, sometimes it will not.
What's strange is that the NVIDIA control panel and the Windows display settings show all three LCDs, I am just not able to turn on one or both of the external displays (even if I turn off the laptop LCD).
Has anyone found a solution to this problem?
Thank you!
Solved!
Go to Solution.

Hi, admarsha
There are updates available for both your BIOS and Optimus that may help this issue. The BIOS update can be found here and the Optimus update can be found here. Looking over the ReadMe for the Nvidia update, part of the update does help with issues connected to multiple displays through docking stations so it may help.
Best,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Similar Messages

T530 multiple display configuration lead to errors when closing the laptop

Hello,
I have a Lenovo T530 2429CTT and I am having some trouble when trying to set up my multiple display configuration with a Lenovo ThinkPad Mini Dock Plus Series 3.
I have an external Samsung LCD monitor which is connected to the Mini Dock via DisplayPort.
I am running Win 7 Prof.
The problem I see is with an application which uses DirectX. The display looks fine in the following configuration:
- Laptop open
- External Samsung LCD Monitor on
- Display cloned so that both devices show my desktop
The issues appear when I close the laptop. I do this because in my office I only work with the external monitor so I don't need the internal display of the laptop at that moment.
When I close the laptop the following happens:
The external display gets dark for some seconds. It comes up again, gets dark and after a while (maybe 10 sec) it stays active. Sometimes I see a notification that the color scheme has changed to Win 7 basic.
Everything seems to be fine now but when looking at the DirectX based display of my application I have some problems for example with the refresh (the display looks very weird).
BTW: The laptop has an internal and an external graphic card (Internal: Intel HD 4000, External: NVIDIA NVS 5400M).
So it seems as when the laptop gets closed, the internal graphics will be turned off. Due to this the display on the external monitor also changes the settings of the graphhic card (maybe it gets turned in an energy saver state).
I was looking at many of the NVIDIA settings without any success so hopefully somebody in this forum has an idea what is happening there.
Thanks,
Andreas

Hi,
I'm trying to buy the exact same configuration.
although i cannot find this 2429CTT on lenovo site anywhere, is available for selling on a known european supplier.
and my propose is to have 2 Monitors connected, so I'll follow this inquire very closely and hold my order until then.
do you have any update on it?
just by curiosity, what about the rest? how does the PC feels to you? everything else is working?
thanks

T530 multiple displays with dock

I've got a new T530 Lenovo ThinkPad, with a Mini Dock Series 3. I've found spec's online that explicetly state that this combination supports two external monitors from any two of the multiple video ports on the dock. I've attached monitors to the VGA and DVI outputs, but only one of them will work at a time.
I've verified that I have the latest BIOS update.
I've found numerous posts in the forums with similar problems, but so far I haven't found any with a definite solution.
Any help would be appreciated.
Thanks

The Intel HD 4000 should in most cases support 3 displays. Here is a link for the Intel side of your issue http://www.intel.com/support/graphics/intelhdgraphics4000_2500/sb/CS-033714.htm
I can't answer to any limitations imposed by Lenovo hardware or configurations.
T530 FHD, i5-3320, 8GB ram, Intel HD 4000 ,500GB 7200rpm HDD, 9 cell, Centrino wireless, bluetooth 4. Ubuntu 12.04 LTS (3.5.0-28)

T530 multiple display in dock, single without dock

Hi
I have a problem with dispplay settings on my T530 with nvidia 5400m. If i Boot the computer in the docking with lid closed I get two displays (fine!). If I boot the computer with lid open in dock i get all black screens (three) but i can move the mouse in between the screens. (all three are acting as thre individuals, no clones) If i boot without dock it also appears as a black screen. However here I can go into bios and change to intel graphics card and then it displays and works on the integreated display.
So I probably need a way to change the settings for undocked devise using nvidia so that I donæt need to access BIOS in order to make it work.

Hi,
I'm trying to buy the exact same configuration.
although i cannot find this 2429CTT on lenovo site anywhere, is available for selling on a known european supplier.
and my propose is to have 2 Monitors connected, so I'll follow this inquire very closely and hold my order until then.
do you have any update on it?
just by curiosity, what about the rest? how does the PC feels to you? everything else is working?
thanks

MacBook Pro Freezing with Multiple Displays

Hi guys,
I've been having a bit of an issue with my MacBook Pro and its handling of multiple displays. I recently bought a third-party adapter off Amazon (that was highly rated and Prime eligible, so it wasn't some completely unknown, 1 dollar adapter). I'm driving two displays: a 1600x900 display over HDMI, and a 1920x1080 display over DVI via the aforementioned adapter.
Whenever I use the adapter with any of these displays, I get intermittent freezes. The computer will freeze for about 10 seconds every so often, and everything besides audio will halt. Audio continues to play back just fine, just any animations/video will freeze. If I have the iTunes visualizer up, it'll freeze. If I have a video up, same thing.
I initially thought it was the adapter, but upon taking it to another retina MacBook Pro (15"), it works just fine, no freezes. Furthermore, if I do something as nuts as taking said adapter, and throwing an HDMI-to-DVI adapter onto the Thunderbolt-to-DVI adapter, the freezes magically go away. Not sure what's making that work, but its impractical since I already have an HDMI port on my MBP.
Here's a list of what I've tried to suss out the problem:
1. Reset SMC. No dice.
2. Zapped PRAM. No dice.
3. Watched Activity Monitor and Console when freeze occurs. Nothing out of the ordinary appears.
4. Swapped display configurations around. Not much changed.
5. Tried seeing if the freezes persist in safe boot: Yes, they do.
6. Tried seeing if the freezes persist in recovery: Yes, they do.
7. Tried combining the two adapter I have on hand (DVI-HDMI and TB-DVI) and running one display over HDMI from the combined adapter: Freezes have gone away for whatever reason.
Anyone have any idea what might be going on? If there's any conclusion I can draw from this, it's that either pure DVI output is broken on my machine, or somehow it's still the adapter I bought causing the freezes. I'm not sure what to do, and while I want to take this machine into the Genius Bar and let them poke at it, trying to reproduce this problem might be really hard in that environment. :/

Hello, exactly the same as mine (MBP early '08) now after nearly 3 year, confronted with the same.
Unfortunately, my first MBP late '07 went through the same problem (no flickering the screen just freeze out of nothing, and 2 logic board, memory replacment didn't help, maybe even 3 logic boards - it's a while ;)) Anyway I got this as replacement. And it just worked fine until yesterday.
Bad now, my AppleCare startet with the first MBP and so its not longer valid. Have my Genius appointment on Saturday and hope it will not be to frustrating.
As 3 years ago I have been reading through the forums and later followd partly these Nvidia discussion, seems to me there is more behind and the root cause never was found. And since Apple has changed the model entirely, I guess rc will never be found.
I will let you know the outcome of the talk on Saturday.

How to identify the current display configuration from registry?

I wanted to read the current configuration of display from registry. Suppose, a dual output system is configured with "Extended these displays" settings then i want to know where in registry this information will be stored?
I tried to get the info from
1. HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\VIDEO which gives only the display devices being registered in the system.
2. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Video which has multiple guid tags and then multiple subkeys.
3. HKEY_CURRENT_CONFIG\System\CurrentControlSet\Control\VIDEO which has multiple subkeys.
Unable to get the right registry for this case. when multiple displays connected, then i want to know whether it is configured as extended/duplicate.
Please guide me if it is possible.

There is no direct way for getting the monitor count. we need to code for each graphic card separately.
i found a way like below, for those of you interested in getting the exact monitor count:
int ComputerInfo::GetRegistryValue( CSString regPath, CSString valueName, int cntIndex )
int monCount = 0;
BYTE pBuffer[1024];
DWORD nMaxLength;
CSString szSubKey = regPath;
szSubKey = szSubKey.substr(18);
CSString szValueName = valueName;
DWORD rc;
DWORD dwType;
HKEY hOpenedKey;
LOG_INFO ( "Registry key " << szSubKey << "\\" << szValueName );
if( ERROR_SUCCESS == RegOpenKeyEx (
HKEY_LOCAL_MACHINE, // handle of open key
szSubKey, // address of name of subkey to open
0, // reserved
KEY_READ, // security access mask
&hOpenedKey // address of handle of open key
rc = RegQueryValueEx(
hOpenedKey,
(const char*)szValueName,
0,
&dwType,
(LPBYTE)pBuffer,
&nMaxLength );
if( rc != ERROR_SUCCESS )
LOG_INFO ( "Registry key " << valueName << " not found." );
monCount = 0;
else
LOG_INFO ( "Monitor Count: " << CSString(pBuffer[cntIndex]) );
monCount = pBuffer[cntIndex];
RegCloseKey( hOpenedKey );
else
monCount = 0;
return monCount;
int ComputerInfo::GetMonitorCount()
int fResult;
fResult = GetSystemMetrics(SM_CMONITORS);
LOG_INFO( "Video Output Count from System: " << fResult );
if ( fResult == 1 )
// I need to get the address of a few multi-monitor functions
HMODULE user32 = GetModuleHandle ("User32.DLL");
typedef BOOL WINAPI tEnumDisplayDevices (void*, DWORD, DISPLAY_DEVICE*, DWORD);
tEnumDisplayDevices* fEnumDisplayDevices = (tEnumDisplayDevices*) GetProcAddress (user32, "EnumDisplayDevicesA");
if (fEnumDisplayDevices == NULL) return false;
// count the number of monitors attached to the system
DISPLAY_DEVICE dd; dd.cb = sizeof(dd);
for (DWORD dev=0; fEnumDisplayDevices (NULL, dev, &dd, 0); ++dev)
LOG_INFO ("Device: " << dd.cb << ", " << dd.DeviceID << ", " << dd.DeviceKey << ", " << dd.DeviceName << ", " << dd.DeviceString << ", " << dd.StateFlags );
CSString devName = dd.DeviceName;
DISPLAY_DEVICE dd1; dd1.cb = sizeof(dd1);
// after second call DispDev.DeviceString contains monitor's name
EnumDisplayDevices(devName, 0, &dd1, 0);
LOG_INFO ("Device: " << dd1.cb << ", " << dd1.DeviceID << ", " << dd1.DeviceKey << ", " << dd1.DeviceName << ", " << dd1.DeviceString << ", " << dd1.StateFlags );
if (dd.StateFlags & DISPLAY_DEVICE_MIRRORING_DRIVER)
LOG_INFO ("Device: " << dd.DeviceName << " is a mirroring driver device. " );
continue;
if (dd.StateFlags & DISPLAY_DEVICE_ATTACHED_TO_DESKTOP)
LOG_INFO ("Device: " << dd.DeviceName << " is attached to the desktop. " );
if ( StringUtils::StartsWith( dd.DeviceString, "Matrox", false ) )
return GetRegistryValue(dd.DeviceKey, "ContextItem.Config", 40);
else if ( StringUtils::StartsWith( dd.DeviceString, "NVIDIA", false ) )
if ( !StringUtils::StartsWith( dd.DeviceString, "NVIDIA ION", false ) )
return GetRegistryValue(dd.DeviceKey, "NV_TargetData", 0);
else
return GetSystemMetrics(SM_CMONITORS);
else if ( StringUtils::StartsWith( dd.DeviceString, "Intel", false ) )
return GetRegistryValue(dd.DeviceKey, "CurrentState", 0);
else
return GetSystemMetrics(SM_CMONITORS);
else
LOG_INFO ("Device: " << dd.DeviceName << " is not attached. " );
LOG_INFO ( "No Devices found." );
return 0;
else
LOG_INFO( "Considered Video Output Count from System. " << fResult );
return fResult;

Multiple application Configurations /Component Configurations.

Hi,
I want to know in which scenario we have to create multiple application Configurations and multiple Component Configurations.
Plz explain With examples...
Best Regards,
dev

A component config controls the component it self. All views.
eg a Component when called with config SALES, hides all PRODUCTIN fields.
Or a Component called with config EXTERNAL automatically switches fields to DISPLAY only. whatever...
You can see why many configs of 1 component make sense.
Now you also know a component can embed other components.
SO how to you string these all together.
When you configure an application:
You simple choose one of the configurations for all embedded components
that should be used.
The APPL config tool, looks inside components to find other embedded components.
You can have a deep selection of component configuration until you reach the lowest level.
Hence why APPLICATION configuration is required and not just component configuration.
The application config can have many component config selections inside it.
Cheers
Phil

Analysis Authorization based on Hier node with multiple display hierarchies

Hi guys - I've got a problem where s.o. might have an idea of how to switch on the light at the end of the tunnel, I am currently standing in:
Requirement:
Cost Center Authorization should be given through RSECADMIN, reporting should be possible for any hierarchy that exists for the authorization relevant info object.
Preferred solution:
The Cost Center Analysis Authorization should be given through RSECADMIN - Hierarchy node assignment.
u2022     A dedicated Authorization Cost Center Hierarchy will be maintained in ECC6 as an alternative cost center hierarchy and extracted into BW.
u2022     The RSECADMIN Hierarchy node assignment should be based on a particular node (Type 2).
u2022     The display level will be specified as required (here: Level 7)
u2022     The Authorization granted should be independent of hierarchy name and version (validity 3).
Reporting Scenario and technical impact:
As mentioned above, when designing and running a query the user should be able to freely select other (i.e. than the authorization) display hierarchies for the authorization relevant reporting object 'Cost Center' as well. The technical names of the semantically relevant hierarchy nodes could therefore vary. E.g. cost centers 1, 2 and 3, being assigned under hierarchy node u2018Au2019 of the RSECADMIN relevant authorization hierarchy, could be subsumed by hierarchy node u2018Bu2019 in another display hierarchy, which the user may want to display in accordance to his reporting needs. Ideally, the alternative display hierarchy should therefore display node u2018Bu2019.
My findings so far (based on prototyping) turn out that this is not possible as long u2018Bu2019 (and its hierarchy) is not authorized in RSECADMIN. Can these findings be confirmed? And if not, would anyone have an idea of how to facilitate the reporting scenario?
Would there be any other way to grant access, possibly based on RSECADMIN single values, and also enable the user to flexibly display hierarchies with only those hierarchy nodes whose single cost center values the user has been given access to?
Thanks everyone for your input...
Claus
Edited by: Claus64 on Jul 13, 2009 4:10 AM

HI CLause,
On Jul 14 2009, you wrote in SDN and said:
FYI: Found a solution...
The hierarchy analysis authorization will be based on a navigational attribute of cost center.
With analysis authorizations it is possible to declare the Auth object (e.g. 0COSTCENTER__RACCAUT0) as authorization relevant and leave the superior object 0COSTCENTER auth irrelevant.
The auth will be given for 0COSTCENTER__RACCAUT0. This object will be placed as a filter of the query, being restricted by an Authorization variable for hierarchy nodes.
Due to the concept of Analysis Authorizations, this variable will automatically pick up the nodes granted as part of RSECADMIN Hierarchy based Authorization.
As mentioned above, 0COSTCENTER as the regular reporting characteristic remains auth irrelevant and can therefore take any hierarchy thatu2019s available. Reporting on single values will be possible, too. Only those nodes show up that hold the authorized cost centers in accordance to the authorization.
If the auth relevant 0COSTCENTER__RACCAUT0 is not used in the query definition by either not taking it in as a filter or skipping the Auth variable, the query will launch the message that the authorization is missing. No data show up at all.
Claus
See this thread:
Analysis Authorization based on Hier node with multiple display hierarchies
I am also in the same situation as you and need to understadn your solution. I understand that you created a Nav Attr on 0COSTCENTER and made this auth relevant whilst ensuring that 0COSTCENTER is NOT auth relevant. This is all fine. The issue was you have multiple hierachies for 0COSTCENTER, how did the new Nav Attr help you solve your issue. When loading 0COSTCENTER what values did you load ino the new Nav Attribute and how did that link to the hierachies? Also, in RSECADMIN you created hiearchy nodes based on the Nav Attribute but I am confused as to what values you have in the Nav Attr.
I appreciate if you can share your solution from the past in more details.
many thanks

How do you use multiple displays with a MacBook Pro and iMac

I have an iMac and a MacbookPro laptop both upgraded to OS X 10.9 (Mavericks). I'd like to use multiple displays with them. Can I do this without an Apple TV? They are both on the same network. If I can, can someone please give some instructions on how this can be done?
Thanks!

Both computers have ports for external monitors. Check your user manuals. Only one display can be added to the MBP, but newer iMacs have dual Thunderbolt ports.
Do your own Google research to learn what to do, but reading your manuals should be all you really need. It' not rocket science yet.

How do I connect multiple displays to a Lenovo 405

how do I connect multiple displays to a Lenovo 405 running windows 7? I tried a video card but the built in amd video port would not function with the video card plugged in.
Moderator Note; subject edit, post moved to here

hi harry13,
Welcome to the Lenovo Forums.
If you're referring to the Lenovo® H405, this unit has an integrated VGA and HDMI out according to this pdf data sheet.
If you'll be using a flat panel monitor (that usualy has a VGA connector and a single link DVI D digital interface), you will need to connect 1 monitor to the VGA out and use an HDMI to single link DVI-D converter on the other monitor. You might need to scan for hardware changes under the device manager to identify the monitor that's connected to the HDMI to DVI-D converter. Note that you need to change the video setup under BIOS to IGD or the onboard graphics.
If you'll be using your discrete video adapter for the multi-monitor setup, you must change the video setup to PEG under the BIOS and the video card must have a vga or hdmi/dvi out.
Also, see these guides as a reference:
How to set up dual monitors in Windows 7
Dual monitor setup: Two monitors are better than one
Hope this helps.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

When I go into full screen mode in Safari 5.1 on LION it switches to a new Space, making my other displays useless. Anyone else annoyed that Apple has completely left out those with multiple displays?

I had a fear that this was going to be the case, but you can't have two full screen apps open in two different displays. At least that's how Safari fullscreen works. When switching over to full screen mode in safari, it automatically creats a new space, turns on four finger gesture to swipe through full screen apps which I had turned off in place of App Switcher.
I don't use spaces because of the lack of support for using spaces with multiple displays. I would use spaces and mission control if I had control of each display's mission control separately.
The fix would be to unlink the displays so they can scroll through full screen apps by themselves. I want this feature so I can mix and match the full screen apps on my three different displays. I see this beneficial for more people with multiple displays. in the future when thunderbolt display links, people will want better support too.
I know I would use spaces and mission control more if I could have this ability. I'd be interested to know people's opinion.

No no, if you read what I said, it would be that each individual display would be customizable to the user. The way you have it, it sounds like your second display will be dedicated to scrolling through fullscreen apps not allowing you to do it on the home screen. This is silly because with my concept, you could do that, by dragging apps to fullscreen in your second display, but if you want you could tell another display to scroll through fullscreen apps (independently) if you wanted. Each display will have it's own mission control with it's own set of desktops. I also can see how some people would still want them linked together, so this could just be a little check box made in mission control prefs to "link" or "unlink" desktops with link checked by default.
With your solution you're limited to your setup. but what if the person has three or four displays? Well then your solution would limit them to one dedicated display that scrolls through fullscreen apps where mine lets a person customize their desktops depending on their preference and setup.
further example: if you have safari, address book and mail in one display, you could still have ichat, PS and Illustrator in your second, and a text editor, FTP Client and iTunes in your third. Then you would mix and match these apps but it would promote the use of mulitple displays as well as benefit people with three or more, which thunderbolt, Cinema Display and Pro computers support.

Is there a way to set up multiple displays to show different DeskTops and/or multiple Full-Screen apps independently?

Hello Apple users/ develpers.....
I have been thinking about this long and hard and it seems like there should be some way to display separate Full-Screen Apps and/or mulitple Desktops.
This would be a key feature that would make Lion surprisingly more efficient than any of its predicessors. However, I have gone into System Preferences>Displays and could find no way to page through and get different desktops to display. I always could extend the desktop, but why do that when I can simply use multiple Desktops and assign them to specific displays.
(For example While on the MacBook Pro I could be doing a project in FinalCut while External Display 1 could be displaying iTunes and Display number 2 could be displaying MS Word. And between each I can switch between each app without changing the monitor display.)
I could also seeing this being extremely helpful in DJ and/or PowerPoint presentations. In a PowerPoint presentation I could use the projector/display to show the individual Slides, while on the computer/laptop I could control other materials.
Or in a DJ situation, I could be controlling iTunes from the computer, displaying a set of animations that I created in Flash/ToonBoom or another animation program, while still being able to work off of an independent display to do my homework or major project.
The whole purpose of multiple displays would be to have multiple access to each of those. And so if there's another APP I need to control them, or if there is a setup command I don't know about, I'd like to know right away.
Also, if Apple hasn't really implimented this (and their OS is designed to have these features) then I guess this'd be my first recomendation to them as something that they need to fix. This alone could be the key to crippling PC. Don't let Windows 8 have a back door!

Not available, why not suggest it here.

How do I get the menu bar to appear on multiple displays without mirroring displays?

I keep finding things about the new Yosemite update that I do not like. The most recent is that apparently you can't have a menubar on multiple displays, unless you mirror the displays. This does not work for me. I want to keep my thunderbolt display as my primary display, but I am working in photoshop on my Cintiqu and I can't afford to drag my mouse all the way back to the thunderbolt display every time I need to access the photoshop menu.
Is there some sort of fix for this that I'm not seeing?
If not I sincerely hope that the apple engineers fix this ASAP.

Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

Spaces with Multiple Displays

I have been using Spaces with my MacBook with an external display, without mirroring to extend my desktop. Overall, it works really well and has certainly made things less hectic when I have 1-8 windows open per application and up to 5 applications.
One thing I figured out by playing is that you can have windows from the same application in different spaces. For example, I have FireFox open with three windows, and can position one FF window in each of three spaces. The only way to do this that I have found is to drag the individual windows from the Spaces view (F8), but it's really useful for me to have web-pages organized by Space (personal, work, Google, etc.). By the way, if I shut down FF or restart the machine, the windows do not "remember" which Space they were in, which is not surprising to me. I assume that is a limitation of FF, not OS X.
Now here is the issue/problem I have experienced several times: Every so often, I will completely "lose" one or more windows. For example, I have two FF windows open in Space 4, then upon switching to another space and going back to Space 4, the windows are gone. They still show up in the list of FF windows (from the "Windows" menu in FF itself), so I think they are still open, but it's like they were assigned to Space 0 or something. There is no way to get to them or bring them back that I have found. There is also no good explanation for why this is occurring or any reproducible set of circumstances.
I can accept that I am pushing the envelope on Spaces using both multiple displays and splitting windows from one application across Spaces, so I am not expecting this to work flawlessly (yet). However, it sure would be useful to be able to recover from this when it occurs.
By the way, as a tip I have mapped my mouse button 3 (external mouse with a scroll wheel that has a button) to show Spaces, which has been very handy for me.
One last thing: Does anyone else think it would be cool to have Spaces act more like true individual Desktops? In other words, be able to set background image per Space and maybe even have different files on each Space/Desktop? Files would be more involved since Spaces are less permanent than a real Desktop, but background images seems like an easy thing to be able to code for.

Just to be clear, you CAN run an application and split its windows across different Spaces by dragging those windows in the Spaces view. So open Firefox in Space 1, open a second FF window in Space 1, then F8 and drag the second window into Space 2 and voila. It's somewhat random what happens when you click on the application icon in the dock when you do this, but it does work.
Good point about the background being very resource-intensive. Never mind.

How to create multiple pof configuration files for c# client

Is there a way to have multiple pof files for c# coherence client?
Can I create a file called my-pof-config.xml with the following line...
<pof-config xmlns="http://schemas.tangosol.com/pof">
<user-type-list>
<include>assembly://Coherence/Tangosol.Config/coherence-pof-config.xml</include>
<include>file://pof-config.xml</include>
and here is what pof-config.xml file look like
<?xml version="1.0" encoding="UTF-8"?>
<pof-config xmlns="http://schemas.tangosol.com/pof">
<user-type-list>
In my C# visual studio project, this is where I load my-pof-config.xml in app.config
<coherence>
<cache-factory-config>coherence.xml</cache-factory-config>
<cache-config>coherence-cache-config.xml</cache-config>
<pof-config>my-pof-config.xml</pof-config>
</coherence>
and this is what I saw in the log...
2012-02-23 14:35:35,529 DEBUG Coherence (null) - 2012-02-23 14:35:35.529 level(thread=System.Threading.Thread): Loaded POF configuration from "FileResource(Uri = file://my-pof-config.xml, AbsolutePath = D:\worktrees\ads\mainline\v2\ads\demos_cs\build\my-pof-config.xml)"
2012-02-23 14:35:35,545 DEBUG Coherence (null) - 2012-02-23 14:35:35.545 level(thread=System.Threading.Thread): Loaded included POF configuration from "EmbeddedResource(Uri = assembly://Coherence/Tangosol.Config/coherence-pof-config.xml, AbsolutePath = assembly://Coherence/Tangosol.Config/coherence-pof-config.xml)"
2012-02-23 14:35:35,623 DEBUG Coherence (null) - 2012-02-23 14:35:35.623 level(thread=ExtendTcpCacheServiceCSharp:TcpInitiator): Loaded POF configuration from "FileResource(Uri = file://my-pof-config.xml, AbsolutePath = D:\worktrees\ads\mainline\v2\ads\demos_cs\build\my-pof-config.xml)"
I don't see pof-config.xml is loaded at "Loaded included POF configuration....". How do I get around it so I can load multiple pof configuration files for c# client?

Hi,
Not sure about C# but I would suggest try removing file:// from
<include>file://pof-config.xml</include>and keep pof-config.xml and my-pof-config.xml in the same directory.
Hope this helps!
Cheers,
NJ

T530 multiple display configuration

Similar Messages

Maybe you are looking for