T5400 I cant get the headphones to work on this system

I recently got this system for xmas. I actually have two issues....when i run a speaker test all speakers work, but when i am playing music, i use winamp, the center speaker does not work. I also can not get headphones to work either. Any tips?
Message Edited by QtLostInOz on 01-11-2005 07:57 PM

you need to go into winamp and go to the output plugins and I forget which one it is but you need to configure the output plugin to enable 5.1 music. When I get home I will check and give you the full where to go and what to do thing.

Similar Messages

  • I cant get the font to work on a picture in Photoshop, I have watched at least 12 how to videos and it wont work, Help

    I cant get the font to work on a picture in Photoshop, I have watched at least 12 how to videos and it wont work, Help

    Could you capture your screen and post it. Have the layers panel open and any layers that are collapsed, expanded. We will need to see the entire screen, as some information in the tab is important as well.

  • My Creative Cam wont work properly in MSN Messenger! I cant get the effects to work PLEASE HELP!

    When I open the webcam centre everything works fine I can get all the effects...BUT when I open messenger (MSN) I get a good picture but when I open the effects window I cant get the effects to work in there.... I went to the creative site which tells me I can use this cam ok in MSN Messenger....Please help before I pull my hair outThankyouBillie-Jean x

    I had the exact same issue but finally after much reading found that the Advanced Video FX utility must be activated first, then open the Web Cam Center.
    On the upper left side just above your image is a Device Selection box. You may not redily recognize it as such.. Click on the down arrow just to the left of the Format tab and select the "Creative WebCam(With Video Effects)". Now try the effects. This did the trick for me. Hope it works for you!

  • I cant get my headphones to work in the headphone port. i know they work because they work fine on

    i cannot get my headphones to work while they are plugged into my laptop. i know the headphones work fine because they play through my ipod. and information would be grand. thanks

    Have you tried changing the flexi jack mode in the console [email protected]

  • I cant get my headphones to work on my laptop

    I have a HP Pavilion dv2025nr notebook and I haven't been able to get my headphones to work since I changed my operating system to Vista Enterprise.
    Can anyone tell me what driver I need to dl to get it working again?
    I appreciate any and all help!  Thank You!

    Hi,
    please try updating BIOS and audio driver for your notebook. there are many updates on the beats audio drivers.
    Good Luck !!!!
    Regards,
    WW
    “I am an HP Employee“
    ***** Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

  • I've been able to trick my ipod into letting me in but I still cant get the touchscreen to work. I've reset it 10 times and I dont have a computer at my house so I am unable to connect it to see whats wrong do I just need to get a new ipod or what this is

    I have been able to trick my ipod into letting me in but I still can't get the touchscreen to work this is extremely annoying and I was wondering if i should just get a new ipod or what?

    You need a computer with iTunes and an internet connection
    Try:
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                                                              

  • I cant get the sound to work on my iphone 4 after i record a movie

    after i record a short video i am unable to get the sound to work. what am i doing wrong?

    Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data, but a reset can cure some glitches.
    If this does not work, try to set it up as new device, explained in this article:
    How to back up your data and set up as a new device
    Don't use the backup afterwards, to rule out a software problem. If the camera is working again, restore from the backup.

  • I have a ipad 2 3g and i cant get the 3g to work

    i have a ipad 2 3g and i cant get the 3g to work

    Well .... there's zero useful information there. Absent any other information, I guess I could say go to Settings and turn Cellular ON.
    Seriously, try writing things more like this:
    I don't understand what you're saying. Please try the following if you'd like to save yourself and others a lot of time:
    Describe what you are trying to do
    Describe how you are trying to do it, in as much detail as you can.
    Describe what you expect to see or have happen when you do it that way
    Describe what you see or what happens instead of what you expected; include any error messages that appear.
    Provide some idea of what you have already looked at or already tried doing to fix the problem, along with the results of those attempts.

  • I cant get the homesharing to work on my PCs.

    I have used this many times in the past and it has always worked fine. As far as I know the only thing that is diffrent is one of the PCs are running Windows 8 now. I have downloaded iTunes again, turned the home sharing off and back on also turned off the firewall nothing seems to make any difference. I had issues the first time i tried this and then was able to get it to work. It worked for a few days then it stopped working again. I am able to use it on the PC running Windows 7 but not on the one running Windows 8. Any suggestions... please?

    Only Mid 2011 or newer Macs running OS X 10.8 (ML) can use AirPlay Mirroring.
    Read here > http://support.apple.com/kb/HT5404
    Try AirParrot > http://airparrot.com/
    Hope that helps

  • Cant Get The Remote to Work

    no matter what i do i cannot get my remote to work. i've done everything apple tells me to do but it doesn't work. i held menu and the next button for 5 seconds and it still doesnt work. ive even tried to hold menu and play/pause. nothing works.

    Do you have access to another Mac with Front Row, or another Apple Remote? This will allow you to ascertain whether it's the remote, or the machine which has the issue.
    ..k
    iMac 24"   Mac OS X (10.4.10)   Lots of shiny toys!

  • Cant get the iPhone to work

    So my dad recently go the new iPhone 4s and decided to give me his old iPhone 4. However he has a different network than i do and my sim does not work with the phone. What can i do about this or is this phone useless to me now?
    Thanks

    FusionBlaze wrote:
    Ah im in Canada. So this phone is useless, that's a shame.
    You would have to ask the carrier if they will unlock it.

  • Libretto U100 - cant get the microphone to work

    Hi
    I have a microphone problem on laptop and also when using my recently purchased Philips SHM3100 Multimedia headset. I have tried to use the Windows Sound Recorder software but my voice is not recognised at all.
    I have a Bluetooth Headset configure of which the sound and microphone works perfectly. Has anyone had the same problem, and found a solution?
    Thank you very much in advance.
    Kind regards.
    Message was edited by: julia1

    I am using :
    Playback: SoundMax Digital Audio
    Recording: SoundMax Digital Audio
    I did a Sound Hardware Test and test result was:
    Microphone test: "Cannot complete the Sound Harware test as your voice was not detected"
    Under Voice Recording, "Advanced" is greyed out.
    You mentioned:
    "By the way; In the SoundMax control panel you should be sure that in the microphone setup the option called headset was selected and not standard mic!!!!"
    Can you please explain?
    Message was edited by: julia1

  • I updated to 5.0 beta and the page on the screed is smaller than the previous version and I cant get the zoom to work to increase the text and pictures.

    the text and pictures is very small or at leat much smaller than in the prior version and the zoom will not make it bigger.

    Hi Idreier,
    I'd try starting Firefox in [[Safe Mode]]. If you don't have the issue while all of your add-ons, extensions, and themes are disabled, you can try adding them back in one by one until you find the culprit.
    Hopefully this helps!

  • Since upgrading to Firefox 5.0, the screen freezes & have to force quit in order to get the browser to work. This happens every time I try to use it.

    Every time I open Firefox, within several minutes, the screen freezes, and the only way I can make it work is to force quit.
    This works for awhile, and then I go through the whole thing
    again.

    c uses the same profile folder as the Windows and Linux platform.
    You can locate the Firefox Profile Folder via
    *Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    Copy and Paste this code in the Code field in the <i>"Tools > Error Console"</i> and click the <i>Evaluate</i> button to see the location of the profile folder.
    <pre><nowiki>alert(Components.classes["@mozilla.org/file/directory_service;1"].getService(Components.interfaces.nsIProperties).get("ProfD", Components.interfaces.nsIFile).path);
    </nowiki></pre>

  • I can't get my headphones to work

    Hello,
    My sound works perfectly through the speakers, but I can't get the headphones to work. The headphones  work perfectly on Windows 7.
    Please just tell me if you need some information about my hardware.
    Cheers,
    Sam.

    Thanks for the reply.
    I do have a ~/.asoundrc file, here it is:
    defaults.pcm.card 1
    defaults.pcm.device 3
    defaults.ctl.card 1
    Here is the lspci | grep -i audio output:
    00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
    01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Redwood HDMI Audio [Radeon HD 5000 Series]
    Here is the lsmod | grep snd output:
    snd_hda_codec_hdmi 21248 1
    snd_hda_codec_realtek 51810 1
    snd_hda_intel 20208 1
    snd_hda_codec 80733 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
    snd_pcm 61237 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
    snd_page_alloc 5901 2 snd_pcm,snd_hda_intel
    snd_hwdep 4746 1 snd_hda_codec
    snd_timer 14902 1 snd_pcm
    snd 44394 9 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
    soundcore 4378 1 snd
    And finally, here is the aplay -l output:
    **** List of PLAYBACK Hardware Devices ****
    card 0: Intel [HDA Intel], device 0: ALC887-VD Analog [ALC887-VD Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: Intel [HDA Intel], device 1: ALC887-VD Digital [ALC887-VD Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    Hope this helps to give useful data.
    Cheers,
    Sam.

Maybe you are looking for

  • Urgent Help Required Please

    Hello, I have the following code public class StudentRecords {    private Hashtable recordHolder;   //Holds marks for collection of students                                      //Maps students to their marks    private int noAssignments;        //Nu

  • Project development

    i want develop a dental software ..it is RIA web application...how can develop using java(swing,applets,jsp,servlets),java script..please help me..

  • Use of Tokens in SAP 8.8 for UDT

    I am facing an issue with use of Crystal Report parameters with tokens for UDT in SAP 8.8 I have used the following parameter : Channel@select code from [@BPGT]    (This doesn't work) This doesn't work for me. But if i use a query for system table, i

  • Using rendered= stops action method being called on commandButton

    Help help help please. I have a managed-bean defined at "request" scope. This bean contains an encodedId field which is a string. This string is present in the form as a hidden field. On submit of the form, this setEncodedId is called on my bean, whi

  • PO Form printing issue.

    Hi Guys, Our ABAPer changed a PO form and moved into QA and PRD. It is printing properly in QA. In PRD the bold feature is gone and printing crappy. Its the same form Why is it doing that in PRD. If any of you guys know where to post, please let me k