T540p Intel HD Graphics Brighness and Sleep not working

So, I just got my shiny new T540p with a 3K display and Win Pro 8 installed. I promptly upgraded to Win 8.1 Pro and now I have a problem with the Intel HD Graphics. Basically, the system will not turn the display on after a sleep and I can't adjust brightness. I tried downloading the drivers from the support page, but they reference a Intel(R) HD Graphics 5000 card, whereas my system says it has a Intel(R) HD Graphics 4600 installed. When I try to run the driver install anyway, I get a message saying that my system does not meet the minimum requirement for installation (??????). I tried manually installing the Intel(R) HD Graphics Family driver instead. This fixed sleep and brightness control, but then all things 3D was completely messed up (like buttons in Skype and Chrome). So I have nailed it down to a defective driver. Does anyone know where to get a driver that will fix this or some other method to get this sorted out?

 I got a brand-new Thinkpad T540p (64-bit Win7, 1920 x 1080 display) three days ago and it’s great except that each time it goes to Sleep or Hibernates there’s a roughly one-in-three chance that it will lock up and need a forced shut down. The brightness control works ok and this is Windows 7, not Windows 8. The drivers are all up-to-date according to Lenovo (I’ve done their recommended updates) but do you think this could be the same problem as described in this thread? Sometimes it freezes in the act of going to Sleep and other times it freezes on waking up. I’ve noticed three types of freeze: Type 1: the screen shows the default blue screensaver with a big ‘Think’ on it but won’t respond to any controls. (Pretty ironic this – it’s forcing me to think hard!). Type 2: the screen is all black but with backlighting seeping through. The brightness controls operate and if I click F8 I get the ‘Change Power Settings of Wireless Radios’ screen and all the buttons work, except when I click ‘Close’ they stop working and it freezes. They start working again if I press F8 again and the cycle repeats. Type 3: completely blank screen with no backlighting. F8 doesn’t do anything. In all three cases the keyboard lighting responds, the hard drive is spinning, the network connection is active, but the only way to a working desktop is a forced shutdown. I'm new to Lenovo so any help much appreciated. ------------------------Edit 15-12-2013 13:59 I tried updating the video drivers as described by Someotherguy earlier in this thread, but I'm still having the same issue with Sleep mode. The Nvidia driver is now 9.18.13.2768 (was 9.18.13.1269) but the Intel driver didn't change (it's 9.18.10.3272). So maybe mine is a different problem. Any clues anyone? 

Similar Messages

  • Nice to see 13" retina but it has only Intel HD Graphics 4000 and does not have NVIDIA GeForce GT 650M with 1GB of GDDR5 memory card. How it will affect the speed, performance and other things compared to 15" retina where NVIDIA GeForce card is available.

    Nice to see 13" retina but it has only Intel HD Graphics 4000 and does not have NVIDIA GeForce GT 650M with 1GB of GDDR5 memory card. How it will affect the speed, performance and other things compared to 15" retina where NVIDIA GeForce card is available.

    The 15" Retina's will have better performance than any 13" Retina. Not only do the 15" machines have dedicated GPU's, but they also have quad-core processors, whereas the 13" Retina's only have dual-core processors.

  • Bluetooth and sleep not working

    MacBook bluetooth "not available" at the same time as sleep not working (the cd drive wakes up and puts it out of sleep after about 20s). These two faults occur together and are intermittent, though increasing in frequency. I have tried all the fixes (flashing, power reset etc) listed, but none are working, e.g. an earlier post is below. Anyone with any clues - I'm in guarantee but would rather not have people pulling the machine to pieces if I don't need to.
    Thanks
    http://discussions.apple.com/message.jspa?messageID=4571577#4571577

    PS. to the above, just worked out that it only happens when I'm connected to mains power (not on battery) so i guess it's some hardware glitch...

  • T42p vista fn + f3 and fn + f4 functions (turn off screen and sleep) not working correctly

    Hi -- I recently installed windows vista on my T42p.  It works fine except that the fn+f3 and fn+f4 functions do not work as expected.  Before installing the hotkeys driver, the fn+f4 function worked correctly while f3 did not (going to sleep worked, turning the monitor off did not).  I then installed the recommended hotkeys driver.  Now fn+f4 makes the monitor turn off while f3 does nothing ... fn+f4 is supposed to put the laptop to sleep.  On top of this, if i select "sleep" from the start menu, the computer turns the monitor off instead of going to sleep.
    Presumably, the sleep button could still be telling the computer to go to sleep, but the actual operation of going to sleep is now broken?  Just a guess.  Anyways -- anyone know how to resolve this so that fn+f3 turns my monitor off and fn+f4 puts my computer to sleep?

    I've too this problem, but more, my sound mute wasn't worked (for deblock, but it can block it few second before...) 5 days in 5-6 instalation of three version of winxp: winxp ru x64 sp2, winxp es/ru sp3 x32.
    eventually I've found and ran "TPOSDSVC.exe" in instalation directory and it give an opportunity  deblocking the sound volume!!!!!!!!!!!! and I don't need more functions 
    volume levels and brightness adjustment worked well without OSD (before I ran TPOSDSVC.exe) and with OSD.
    and now I don't know worked this bustered sound driver in winxp x64.
    ThinkPad T61 7664

  • SOLVED kinda : New Graphic card and PulseAudio not working as expected

    Hello,
    I just changed my RadeonHD 4670 for a 7870, now when I type "aplay -l"  I get a lot of HDMI outputs, although only one on the card...
    I think this confuses PulseAudio and I get no sound... (with previous card it worked all fine)
    if in default.pa I specify the alsa sink device=hw:0,3 directly, I do get sound, but then in pavucontrol I do not get the advanced sub-menu anymore which makes me think something is not working properly...
    What should I look at?
    Thanks!
    Last edited by gee (2013-11-29 05:19:01)

    well I finally found a hack that worked.
    I changed the extra-hdmi.conf in /usr/share/pulseaudio/alsa-mixer/profile-sets file to :
    [Mapping hdmi-surround-extra0]
    description = Digital Surround 5.1 (HDMI 0)
    device-strings = hdmi:%f,0
    paths-output = hdmi-output-0
    channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
    priority = 1
    direction = output
    [Mapping hdmi-surround-extra3]
    description = Digital Surround 5.1 (HDMI 3)
    device-strings = hdmi:%f,0
    paths-output = hdmi-output-3
    channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
    priority = 1
    direction = output
    I only need one of these two, somehow they both work...
    But next time pulse gets updated I'll have to remember to fix that again... not just a workaround not a fix.
    Last edited by gee (2013-11-29 05:20:37)

  • Lenovo G510, the Intel HD Graphics 4600 and Radeon 8750M, will not work!

    Good evening,
    I have a Lenovo G510, 59401564, i7 with Intel HD Graphics 4600 and Radeon 8750M graphics card.
    I have problems with graphics cards to get it to work permanently!
    The installation of the graphics card driver works fine but after about 30 minutes an hour, crashes the laptop and a bright blue screen is shown "VIDEO_DXGKRNL_FATAL_ERROR".
    After a restart, the Graffikarten are disabled, a small window says that the driver must be reinstalled.
    I have the Windows 8.1 64-bit, drivers from the Lenovo website uses. To reinstall, I used Catalyst_13.12_WHQL_UnifL_R3.01.exe.
    I've been trying to determine two days why.
    I really need help, I think more users have the same problem.
    I am grateful for any help!

    hi angefragt,
    Welcome to Lenovo Community Forums!
    Did you just got the unit or You got it some time around?
       If you were able to use the comuter before you might need to push a system restore to a date when the crashes did not appear. Adn start a Windows Update.
     According to this, It may be a conflict, Driver or OS issue,
                http://msdn.microsoft.com/en-us/library/windows/hardware/ff557253(v=vs.85).aspx
    Regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Is The Intel HD Graphics 4000 And The Intel Core i3-3110M Processor Good For Premier?

    Dear Forums Members,
    Latley I've been looking for a laptop that can fit my video edting needs + some office work. What i need from Premier is the abilty to edit SD quality videos, my budget is not that high ( + I live in Israel where everything is more expesnive ).
    I've been thinking about the Lenovo IdeaPad G500 5938-9998 wich comes with a Intel® Core™ i3-3110M Processor and Intel® HD Graphics 4000 and 4GB RAM and 500GB Sata (5400RPM) Hard Drive.
    My Quastion is: will it be ok to edit SD videos in premier 6 or 5? and if not, wich premier IS good for this specific computer?
    Thanks ahead, Jonathan.

    Jonathan, If you mean the old Premiere 6 or Premiere 5, then those versions of Premiere are extremely old and severely outdated. In fact, Premiere 6 was released before Windows XP even came out. As such, you may have serious trouble running Premiere 6 (not to be confused with Premiere Pro CS6) on newer versions of Windows such as Windows 7 or Windows 8.x.
    On the other hand, if you mean Premiere Pro CS6 or CS5.x, then that planned laptop is too weak to handle much of anything (video editing related), especially since that i3-3110M CPU is only a dual-core CPU that's capped at 2.4GHz and that CS6/5 does not support GPU acceleration for any non-Nvidia or any integrated GPUs. As such, I second the responses suggesting the cheapo consumer version of Premiere, Premiere Elements (the current release is 12.0).

  • HT201343 I bought my macbook pro on August 2011 at an apple store, with the Intel i7. However mirrorring in not working with two of my Apple TVs. These Apple TVs are 2nd and third generation loaded with the latest software. Can someone help?

    I bought my macbook pro on August 2011 at an apple store, with the Intel i7. However mirrorring in not working with two of my Apple TVs. These Apple TVs are 2nd and 3rd generation loaded with the latest software. I can succesfully transmit from my itunes on my Macbook pro to both Apple TVs, but I can not see the airplay icon on the taskbar. Can someone help?

    About AirPlay and Airplay Mirroring
    AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
    Several Apple Articles Regarding AirPlay
    Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
    How to set up and configure AirPort Express for AirPlay and iTunes
    About AirPlay Mirroring in OS X Mountain Lion
    iTunes 10- About playing music with AirPlay
    Troubleshooting AirPlay and AirPlay Mirroring
    Using AirPlay

  • What is the difference between the Intel HD Graphics 5000 and the Intel Iris Pro Graphics in  the current iMacs

    What is the difference between the Intel HD Graphics 5000 and the Intel Iris Pro Graphics in  the current iMacs?

    I am assuming you are talking about PPC Macs? Those haven't been manufactured or sold in years (since early 2006 I believe) when Apple started using Intel processors. There are still some apps which run on PPC code only which makes them incompatible with the last three Mac operating systems.
    There are different Applecare products depending on which Mac product you buy, although the coverage is about the same (except for iOS devices).

  • While updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

    while updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

    Disconnect the iPad, do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!, reconnect and follow the prompts.
    If that does not work then see here http://support.apple.com/kb/HT1808

  • My ipod touch 4th gen home button has stopped working i have taken of the screen and tried pushing the button underneath and still not working please help

    my ipod touch 4th gen home button has stopped working i have taken of the screen and tried pushing the button underneath and still not working please help

    Try a reset:
    Hold the Sleep and Home button down until you see the Apple logo.

  • TS1702 I just bought a new iphone 5S and once turned on and pushed the button restore from Icloud, I'm stil stuck in this section i can't do anything plus i turned it off and on again and still not working, please provide me with a solution very urgently!

    I just bought a new iphone 5S and once turned on and pushed the button restore from Icloud, I'm stil stuck in this section i can't do anything plus i turned it off and on again and still not working, please provide me with a solution very urgently!!
    Kindly note also that i did not work on this iphone before, i just turned it on and i cannot connect it to the itune and restore it as the itune cannot read the device since i'm not able to reach my home screen, I am stuck in my restoring screen.
    Please help!!!!

    You dont have any data on your phone yet right?
    If you dont connect your device to the computer and
    Press and hold the Sleep/Wake button and the Home button together for at least 15 seconds, until the Apple logo appears.
    after that click okay when it says itunes has detected an iphone in recovery mode. Then click restore
    after that try again

  • Pageup and pagedown not working in firefox

    pageup and pagedown not working in firefox. I read in other posts to install the latest graphics driver and I did. I also uninstalled flashplayer and downloaded and installed the latest version.

    Hello yukhateeee try to hitting the F7 key in keyboard and check it again.
    also you can '''UNCHECK Always use the cursor keys to navigate within pages''', go from '''Firefox button''' > '''Options''' > '''Options''' > '''Advanced''' > '''General''' tab > '''Accessibility '''session > A'''lways use the cursor keys to navigate within pages [ ]'''.
    thank you

  • My airport express has a blinking yellow light and is not working. I have tried resetting it a few times, to no avail.   My airport utility on my desktop detects it and will attempt to connect. However, after a few moments it says "An unexp

    My airport express has a blinking yellow light and is not working. I have tried resetting it a few times, to no avail.
    My airport utility on my desktop detects it and will attempt to connect. However, after a few moments it says "An unexpected error occurred Try again."
    I'm running Mavericks on a 24-inch 2007 mac, 2.4 GHz Intel Core 2 Duo, 4 GB 667 MHz DDR2 SDRAM, OS X 10.9.3 (13D65). The Airport Express is model A1264. I connect to it via an Airport Extreme with 7.6.4.
    Thanks in advance.

    I have the same problem with my airport express – a blinking yellow light and it is not working. I have tried resetting it a few times.
    My airport utility detects it and try to connect. However, after a few moments it says "An unexpected error occurred Try again.
    Airport Express is model A1143
    And I have tried to connect with iPhone - same same.

  • HT5622 My facetime is not recognizing my Apple ID.  Reset it and still not working (on two Ipad devices).

    my Facetime is not working.  Reset my passwords and tried on two ipads and still not working.  It both worked two weeks ago.  What am I missing?

    Try this. Go to Settings>FaceTime >Off. Reset the iPad and then go back and turn FaceTime on again. See if that fixes it for you.
    Reset the iPad by holding down on the sleep and home buttons at the same time until the Apple logo appears on the screen. Ignore the red slider bar if it appears.

Maybe you are looking for

  • How to do this in a data_table

    I have an existing HTML table that allows highlight of rows when mouse passes over the row. The code that uses javascript events like onmouseout and onmouseover looks like this: <tr nowrap valign="top" onmouseover="mover(this, '#cccccc')" onmouseout=

  • Insert record page - works in Safari, but not IE / Firefox

    I've been working on a form where users can post an enquiry to a database. Thought it was all starting to come together, but I noticed at another client's today that it didn't work in IE. In Safari you fill in the form, hit the Post Enquiry button an

  • How to publish WSDL as Webservice in XI 3.0

    Hello, My Scenario is  SOAP --XI -- R/3(Proxy). XI version is XI 3.0 and SAP R/3 4.7 Generated a WSDL for SOAP Sender(ID>Tools>Define webservice) I want to know  how can i publish this  WSDL as webservice. Appericiate your help. Srinivas Edited by: S

  • Problem with smartform conversion

    Hello i am trying to convert PO into SMARTFORM using this code.. https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/convertSmartformtoPDFformat& but it is taking me to dump error and when i analyzed the source code where i am going wrong it

  • Don't see Enhanced redirection security

    Hello !  I want to connect to the app on windows live develop center and disable Enhanced redirection security  but i don't see this option. It's very annoying for me.  What should i do to see this option or disable without seeing ? https://lh4.goog