T60 1951-FEG Screen resolution W7

Is it possible to achieve higher resolution than 1078 x 768 on this machine using windows 7?
Solved!
Go to Solution.

If you want a higher native resolution, you can replace the LCD with a 14" SXGA+ panel for 1400x1050.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Similar Messages

Trouble setting up X with FreeBSD 7.1 on my Thinkpad T60 1951-FCG

Hi!
I'm having some trouble setting up X on my Thinkpad T60 1951-FCG running FreeBSD 7.1. When I run whatever config, either the one I get from X -configure or one edited after my settings, all I get is a black screen. The screen is a tad bit lighter than when my laptop is powered off though. This effectivly locks my laptop up -- the only way I can get out of the "black screen of death" is to SSH in and kill the process, which then turns my monitor into this: http://folk.ntnu.no/sigurdhj/laptop_fail.jpg. The only way I can get back to a normal screen is by rebooting. If I try to start X through SSH, I get prompted with the message: Failed to load DMI info, X60 TV quirk not applied.
I've given the 'vesa' driver a go aswell, with that I can get a picture at least, but still loads of error messages. My monitor works perfectly with Windows XP, Ubuntu, and PC-BSD -- which leads me to believe that my monitor is fine, and that it's just a matter of configuring it right.
After the read of 'man intel' I'm thinking it could be something with the setting LVDSFixedMode, but the information about that was just too advanced for me to make anything of. I've included my xorg.conf.new file aswell as the Xorg.0.log file.
Hope there is someone out there bored enough to help me sort this out.
(xorg.conf: http://folk.ntnu.no/sigurdhj/xorg.conf.new.txt )
(Xorg.0.log: http://folk.ntnu.no/sigurdhj/Xorg_0_log.txt )
Cheers,
Kladd

If you check the info on the AirPort Utility 5.6.1 download page, this application is for Leopard and Snow Leopard....10.5.7 to 10.6.8
It will not run on Lion
Instead, you need to download and install AirPort Utility 5.6 for Mac OS X Lion

Ethernet card disappears after SP3 install (T60 1951-45G)

Hi!
I updated my Windows XP to Service Pack 3 yesterday and now it seems my ethernet card has disappeared. i.e. it acts at it has been disabled in the BIOS (not showing up in device manager etc.). I've tried entering BIOS, hiding it, booting, restart, enable in BIOS and new boot but no luck. In another thread I saw people complaining about broken MS update and that a clean install might resolve the problem.
My question is if anyone else have had the same experience and if it is solvable without a clean install of a streamlined SP3.
My machine is a T60 1951-45G.
Everything else seems to run just fine by the way, but I'll post back if I find additional problems.
Solved!
Go to Solution.

There are reports of SP3 breaking LAN/WAN connectivity on many laptops (TechNet, MSFN, MS forums). Not quite certain what the resolution is at this point, and not quite certain whether a streamlined SP3 fresh install would be a fix for the issue. For some, SP3 disables WAN completely, while for others the issue is with LAN. It seems certain "newer" drivers are the culprit.
Before doing something drastic, try re-installing the LAN drivers from Lenovo to see if that fixes it, otherwise you may just have to revert back to SP2 (nothing wrong with it on an existing machine that otherwise runs without issues). SP3, afterall, is particularly a cumulative update (albeit with some new "features"), so really there's no great reason to update a working and updated XP-SP2 system with this new service pack.
On a side note, be sure to check if KB941644 was inadvertently installed as part of the update - it's a "hotfix" that is known to cause a number of connectivity issues (unresolvable).
You can check here (MS XP issues) to see if there is a solution to your issue.
Hope this clears things up

T510 max screen resolution is 1366 x 768?

Hi anyone,
Got a new T510 and the mex screen resolution I can get is 1366 x 768?
Is that correct?
I have been using 1680 x 1050 on T61 so I feel like I;ve gone backwards in 3 years.
Does anyone know ho I can get a higher res?
mkozma

Hi and welcome to the forum!
What is 7 character product number of your T510? It looks like 2668-KHU and can be found on the bottom sticker, please don't post the S/N, thanks!
Keep us posted.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Bridge - How to view image in full screen resolution

In Bridge - How to view an image in full screen resolution and not as a Preview (Space bar), like in Lightroom (F), Photoshop or ViewNX 2 ?

The size of the Bridge Preview window will always be the absolute limit of the image display in Bridge. Maybe I am not following you. Sorry

DB does not look the same in different screen resolutions

Hi All -
I have built my dashboards using the Windows screen resolution 1024 x 768, and exported the dashboard into powerpoint. With this resolution the dashboard looks normal. I then changed my Windows screen resolution to 1280 x 1024, opened the ppt slideshow and my X-axis labels are being cut off. The labels are written vertically (ex: 06/09/09).
Does anyone know why this could be happening?
Thanks!
Tracy

I am experiencing the exact same thing. The width of the tabs in the layout editor is varied depending on the length of the text. However, at run-time, the width of the tabs is fixed, causing the tabs to be wider than the window and a set of VCR buttons to appear in the upper right corner of the canvas. Personally, I think this is a Forms bug. Why would they intentionally let us set the width to variable at design-time only to force a fixed width at run-time?

Unable to Change Screen Resolution in Remote Session - Windows Server 2012 R2

Does anybody know of a way to allow Remote Desktop users to adjust their own screen resolution in a remote session under Windows Server 2012 R2? We are struggling with this and can't seem to find a solution.
When users login to their RDP session and try to adjust their screen resolution this message is displayed in Control Panel:
"The display settings can't be changed from a remote session."
We don't want to use the "make text and other items larger or smaller" scaling feature, as this produces undesirable results with some of our applications. We also don't want to have to support multiple types of RDP clients or RDP shortcut
files.
We have looked at other posts but can't find an answer that applies to Windows Server 2012 R2. The closest thing we could find is KB2726399, but it only applies to Server 2008.
Does anybody have a solution for Server 2012?
Thanks

Hi,
Currently you cannot change the resolution from within the session. This is normal and expected behavior.
Unfortunately this means you need to set the desired resolution before connecting by using custom .rdp files, manually within the Remote Desktop Client, custom web launch page, custom windows launch program, etc.
-TP

Using Mini DisplayPort to VGA, screen resolution distorts. How do I fix?

When I use my Mini DisplayPort to VGA adapter, the resolution gets too big for my screen (mbpro 15") and the same thing appears on the projector I use. I'm not sure if I should change my screen resolution while I use the projector or what?
Also, the first (and only) time I used it, it seemed as if the signal wouldn't even send. After a while of fiddling around, the screen finally showed up on the projector (distorted) but we didn't do anything different to change that. It just kind of did it on it's own. Is this common for "first uses" or will this happen every time?
I plan on using this again Friday.

Welcome! If you have mini displayport, you should try the appropriate discussion group for your newer machine:
http://discussions.apple.com/category.jspa?categoryID=251
Although some things are very similar to the original Macbook Pro, many are not.

How to turn off "screen resolution" warning in iPhoto?

I am running OS X Yosemite 10.10.1 on a Mac mini (Late 2012), 2.3 GHz, 4 GB memory, iPhoto version 9.5.1 (902.17). I get the "screen resolution not optimal for iPhoto" warning repetitively about once every 15 minutes as long as iPhoto is running. I have set the resolution to my preference and I don't mind seeing this warning once when I start iPhoto, but it gets annoying. How can I set iPhoto to stop doing this?

I am running OS X Yosemite 10.10.1 on a Mac mini (Late 2012), 2.3 GHz, 4 GB memory, iPhoto version 9.5.1 (902.17). I get the "screen resolution not optimal for iPhoto" warning repetitively about once every 15 minutes as long as iPhoto is running.
Is there a reason, why you do not update to the Yosemite compatible version iPhoto 9.6? I never get the warning, you are reporting, if the iPhoto window can fit the screen, with MacOS X 10.10.2 and iPhoto 9.6.1.

How can I resize my Flash site to fit any screen resolution?

I built a 100% flash site with tiled framing but I have a
problem. My flash was built 766 x 750 pixiels. When viewed at
resolutions greater than 1024x768 the webpage looks great but
anything less than that it looks like @#$@. I know most people
probably view at 1024 x 768. Is there anyway to auto resize based
up on screen resolution or something to detect the screen size and
adjust the webpage accordingly.
www.platlimosvc.com
Below is my html (index.html) for my flash movie:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN">
<html>
<head>
<title>Untitled</title>
<meta http-equiv="content-type" content="text/html;
charset=UTF-8">
<link href="style.css" rel="stylesheet"
type="text/css">
</head>
<body>
<table cellpadding="0" cellspacing="0" border="0"
style="width:100%; height:100%">
<tr>
<td valign="top" style="width:100%" height="750">
<table cellpadding="0" cellspacing="0" border="0"
width="766" style="height:100% " align="center">
<tr>
<td valign="top" width="234" style="height:750px ">
<object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swfl
ash.cab#version=6,0,29,0" width="766" height="750">
<param name="movie" value="flash/xxxx_main.swf">
<param name="quality" value="high">
<param name="menu" value="false">

<object data="flash/xxxx_main.swf"
width="766" height="750"
type="application/x-shockwave-flash">
<param name="quality" value="high">
<param name="menu" value="false">
<param name="pluginurl" value="
http://www.macromedia.com/go/getflashplayer">
FAIL (the browser should render some flash content, not
this).
</object>

</object>
</td>
</tr>
</table>
</td>
</tr>
<tr>
<td valign="top" style="width:100%; height:1px;
background-color:#6C6C6C">
<table cellpadding="0" cellspacing="0" border="0"
style="width:100%; height:1px">
<tr>
<td valign="top" style="width:50%;
height:1px"></td>
<td valign="top" style="width:766; height:1px">
<table cellpadding="0" cellspacing="0" border="0"
width="766" style="height:1px ">
<tr>
<td valign="top" width="766" style="height:1px
"></td>
</tr>
</table>
</td>
<td valign="top" style="width:50%;
height:1px"></td>
</tr>
</table>
</td>
</tr>
<tr>
<td valign="top" style="width:100%; height:100%">
<table cellpadding="0" cellspacing="0" border="0"
style="width:100%; height:100%">
<tr>
<td valign="top" style="width:50%;
background:url(images/bottom-3.gif) top right;
height:100%"></td>
<td valign="top" style="width:766;
background-image:url(images/bottom-5.gif); height:100%">
<table cellpadding="0" cellspacing="0" border="0"
width="766" style="height:100% ">
<tr>
<td valign="top" width="766" style="height:100%
"></td>
</tr>
</table>
</td>
<td valign="top" style="width:50%;
background:url(images/bottom-4.gif) top left;
height:100%"></td>
</tr>
</table>
</td>
</tr>
</table>
</body>
</html>

tlcarl,
> I know most people probably view at 1024 x 768.
You think so? Even if they have their resolution that high
(which is
fairly standard, nowadays), do you think most people maximize
their browsers
to fill that whole area?
> Is there anyway to auto resize based up on screen
> resolution or something to detect the screen size and
> adjust the webpage accordingly.
There is, indeed. :) Check out the Stage.onResize event in
the
ActionScript 2.0 Language Reference. That event is dispatched
when the
browser (or whatever container) is resized -- in cases where
the SWF is
embedded with percentages. If that's your aim, you'll need to
code against
that event, which can be done like this ...
http://www.quip.net/blog/2006/flash/how-to-position-movie-clips-browser-resizing
It can take a bit of thought, depending on the complexity of
your goal,
but the result is usually worth it. The site in your URL is
already built,
so this wouldn't do much of anything without opening the
hood, so to speak,
and completely rebuilding the engine. A Flash movie has to be
designed and
programmed to respond to the Stage.onResize event.
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design."

Itunes 11 keeps changing my screen resolution

I too am an itunes 11 sufferer! Everytime I run it, it alters my screen resolution - I'd happily upgrade to the older, better, bug-free version that I was running before,but am afraid i might lose my library of music.
In trying to find a solution online i can't believe the number of issues with Itunes 11 that have cropped up. Does Apple really despise its customers so much and hold them in such low regard that they could bring out such a flawed piece of software?
Does anyone have a solution to having to reset the screen resolution everytime I use iTunes?
Thanks,

Caleb.online wrote:
There isn't a way to increase the width of the iTunes window
You can resize any window by grabbing (click-hold) the three little lines in the bottom right corner and move it up or down, right or left.
Is this what you mean?
BTW... the resolution of 1280 x 800 is what you would normally set your screen to.

EHP1 Upgarde Monitor screen resolution problem in a support message

Hi Experts,
We have recently upgraded our Solution manager to EHP1, iam facing a screen resolution problem with 15 inch monitors.
Our key users have 15 inch monitors to their system and when they try to reply a support message under transaction data-> Overview tab -> reply it is showing only one line for them , due to which they are unable to enter the complete data in it.
How ever We have found that this does not occur with 17 inc monitors as the required screen resoution 1280* 1024 is possible due to bigger size of the monitor.
can any one suggest how to make the overview tab visible completely with small resolution monitors.
Thanks
Nanda

>
Nanda Kishore wrote:
> Hi
>
> There is an note from sap on this issue i couldnt remember the note number which talks about updating your package levell
>
> Kindly check this note it was released in SEP 09 a very recent one. this will resolve your probelm.
SAP Note 1351673 Size of containers not changed for support messages
Best regards,
Ruediger

Screen Resolution trouble on Toshiba Satellite l775-s7307after reinstallation of Windows 7

I was having troubles. Had browser malware that couldn't be contained, and I had other issues, such as, getting the blue screen of death on a regular basis.....I wiped the HD, and reinstalled Windows 7-32 bit, and downloaded and installed all the drivers for this model from the Toshiba website, but I seem to be struggling with readjusting my screen resolution to where it should be....It won't set any higher than 1024 x 768.
Any ideas?

In the future, I'd recommend performing a system recovery rather than reinstalling a clean copy of Windows. A system recovery will include all applicable software.
You installed the latest Intel display driver?
Intel Display Driver(v8.15.10.2509; 10-11-2011; 86.48M)
- Peter

Xorg 1.6, nvidia and screen resolutions

I just upgraded to xorg 1.6 from testing, including the nvidia drivers and kernel from testing. Everything is working great (and it fixed the libxi keyboard layout problems I was having), except that I can no longer select the screen resolution I want from the nvidia-settings application. The set of resolutions is very limited and I'm getting a horizontal stretch due to an incorrect aspect ratio.
I've tried manually adjusting the xorg.conf file after saving it in nvidia-settings, but it makes a mess of the file and I couldn't get it working. Does anybody know how to add screen resolutions into the nvidia-settings application?
Thank you!
Darin

Happened to me with most recent 1.5 update, I downgraded back to previous one to get working again. And now same happened with 1.6, this time I downgrade again without any further testing until someone else gets it solved

[SOLVED] Updating Xorg screwed up my screen-resolution.

After doing pacman -Syu earlier this evening, my screen-resolution was screwed up. One of the packages that was updated by pacman -Syu was X to 1.7.1-1 and all of its depencies.
I downgraded xorg (and its dependencies) to 1.6.3.901-1 and after that everything is working fine again.
I'm trying to figure out why the update failed, but to be honest I don't know where to look for clues. The only thing I can come up with is that maybe it would be better to update X without X running.
Before I try this solution I need some feedback on this. So if you could please give your comments/advise towards the following issues:
1. Is it better to update X without X running?
2. Where would I have to look for clues to find out why the update of X failed?
Thxs.
Last edited by NeoXP (2009-11-01 21:39:13)

NeoXP wrote:
After doing pacman -Syu earlier this evening, my screen-resolution was screwed up. One of the packages that was updated by pacman -Syu was X to 1.7.1-1 and all of its depencies.
I downgraded xorg (and its dependencies) to 1.6.3.901-1 and after that everything is working fine again.
I'm trying to figure out why the update failed, but to be honest I don't know where to look for clues. The only thing I can come up with is that maybe it would be better to update X without X running.
Before I try this solution I need some feedback on this. So if you could please give your comments/advise towards the following issues:
1. Is it better to update X without X running?
2. Where would I have to look for clues to find out why the update of X failed?
Thxs.
I have a similiar problem except that my X hang the whole computer. I have an Intel card and maybe thats the reason for the hang. To answer 1., I did my upgrade without X running, so that doesn't prevent bad things from happening. I downgraded to the previous version, as you did, and now everything is working again.
With respect to 2., I looked into Xorg log and found nothing relevant to this problem.

T60 1951-FEG Screen resolution W7

Similar Messages

Maybe you are looking for